1# $Id: Makefile.in,v 1.75 2013/09/02 03:54:35 manu Exp $
2
3#
4# Copyright (c) 2004 Emmanuel Dreyfus
5# All rights reserved.
6#
7# Redistribution and use in source and binary forms, with or without
8# modification, are permitted provided that the following conditions
9# are met:
10# 1. Redistributions of source code must retain the above copyright
11#    notice, this list of conditions and the following disclaimer.
12# 2. Redistributions in binary form must reproduce the above copyright
13#    notice, this list of conditions and the following disclaimer in the
14#    documentation and/or other materials provided with the distribution.
15# 3. All advertising materials mentioning features or use of this software
16#    must display the following acknowledgement:
17#        This product includes software developed by Emmanuel Dreyfus
18#
19# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
20# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
21# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
22# DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
23# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
24# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
25# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
27# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
29# OF THE POSSIBILITY OF SUCH DAMAGE.
30#
31
32CFLAGS= 	@CFLAGS@ -D_BSD_SOURCE -DYY_NO_INPUT -I. -I${SRCDIR} @CPPFLAGS@
33LDFLAGS=	@LDFLAGS@
34LIBS= 		@LIBS@
35prefix=		@prefix@
36datarootdir=	@datarootdir@
37exec_prefix=	@exec_prefix@
38SYSCONFDIR=	@sysconfdir@
39LOCALSTATEDIR=	@localstatedir@
40SRCDIR=		@srcdir@
41BINDIR=		@bindir@
42SBINDIR=        @sbindir@
43MANDIR=		@mandir@
44USER=		@USER@
45CONFFILE=       @CONFFILE@
46DUMPFILE=       @DUMPFILE@
47
48# If your make complains about -j, try --disable-parallel-make
49MAKESEQ=        $(MAKE) @MAKE_J1@
50
51CC=		@CC@
52MKDEP=		@MKDEP@
53RM=		@RM@
54MV=		@MV@
55TEST=		@TEST@
56SED=		@SED@
57INSTALL=	@INSTALL@
58LEX=		@LEX@
59YACC=		@YACC@
60TRUE=		@TRUE@
61TOUCH=		@TOUCH@
62
63OBJ= 		milter-greylist.o pending.o sync.o dnsrbl.o list.o macro.o \
64		conf.o store.o dump.o spf.o acl.o urlcheck.o stat.o clock.o \
65		geoip.o fd_pool.o prop.o ldapcheck.o dkimcheck.o p0f.o \
66		spamd.o mx.o ratelimit.o nsupdate.o brokenmfapi.o geoip2.o
67OBJ_SEQ=	conf_yacc.o dump_yacc.o
68OBJ_SEQ_FLAG=	.objseq-built
69SRC= 		milter-greylist.c pending.c sync.c conf.c macro.c stat.c \
70		clock.c store.c dump.c spf.c acl.c dnsrbl.c list.c \
71		urlcheck.c geoip.c prop.c ldapcheck.c dkimcheck.c p0f.c \
72		spamd.c mx.c ratelimit.c nsupdate.c brokenmfapi.c geoip2.c
73GENSRC=		conf_yacc.c conf_lex.c dump_yacc.c dump_lex.c
74
75VPATH=		${SRCDIR}
76
77all:		milter-greylist rc-bsd.sh rc-redhat.sh \
78		rc-solaris.sh rc-debian.sh rc-gentoo.sh rc-suse.sh
79
80# GNU make: targets which are not expected to produce same-named files
81.PHONY:		bld-milter-greylist obj-seq bld-seq all-seq
82
83milter-greylist:	${OBJ} ${OBJ_SEQ_FLAG}
84	@echo "=== Linking $@:"
85	${CC} -o $@ ${OBJ} ${OBJ_SEQ} ${LDFLAGS} ${LIBS}
86
87# The idea is that a successful obj-seq build would produce the flag-file,
88# thus "milter-greylist"'s verifiable dependencies are satisfied and the
89# binary is not relinked on every make run. However, code updates that can
90# cause rebuilds of ${OBJ_SEQ} files might require a "gmake rebuild" now.
91${OBJ_SEQ_FLAG}:	obj-seq
92	sync || $(TRUE)
93
94all-seq:	obj-seq
95obj-seq:
96	@echo "=== Call make sequential for objects sensitive to that (current make='$(MAKE)' MAKEFLAGS='$(MAKEFLAGS)'):"
97	$(MAKESEQ) bld-seq
98
99bld-seq:	${OBJ_SEQ}
100	$(TEST) -f ${OBJ_SEQ_FLAG} || $(TOUCH) ${OBJ_SEQ_FLAG}
101
102sync_yacc.o:	sync_yacc.c sync_lex.c
103conf_yacc.o:	conf_yacc.c conf_lex.c
104dump_yacc.o:	dump_yacc.c dump_lex.c
105
106sed_subst = "s|@BINDIR[@]|${BINDIR}|g; s|@SBINDIR[@]|${SBINDIR}|g; s|@USER[@]|${USER}|g"
107
108rc-bsd.sh:      rc-bsd.sh.in
109	${SED} ${sed_subst} ${SRCDIR}/$< > $@
110rc-redhat.sh:    rc-redhat.sh.in
111	${SED} ${sed_subst} ${SRCDIR}/$< > $@
112rc-solaris.sh:    rc-solaris.sh.in
113	${SED} ${sed_subst} ${SRCDIR}/$< > $@
114rc-debian.sh:    rc-debian.sh.in
115	${SED} ${sed_subst} ${SRCDIR}/$< > $@
116rc-gentoo.sh:    rc-gentoo.sh.in
117	${SED} ${sed_subst} ${SRCDIR}/$< > $@
118rc-suse.sh:	 rc-suse.sh.in
119	${SED} ${sed_subst} ${SRCDIR}/$< > $@
120
121install-daemon-to-bin: milter-greylist
122	${INSTALL} -d -m 755 ${DESTDIR}${BINDIR}
123	${INSTALL} -m 755 milter-greylist ${DESTDIR}${BINDIR}
124
125install-sbin: milter-greylist
126	${INSTALL} -d -m 755 ${DESTDIR}${SBINDIR}
127	${INSTALL} -m 755 milter-greylist ${DESTDIR}${SBINDIR}
128
129install-man:
130	${INSTALL} -d -m 755 ${DESTDIR}${MANDIR}/man8
131	${INSTALL} -d -m 755 ${DESTDIR}${MANDIR}/man5
132	${INSTALL} -m 644 ${SRCDIR}/milter-greylist.8 ${DESTDIR}${MANDIR}/man8
133	${INSTALL} -m 644 ${SRCDIR}/greylist.conf.5 ${DESTDIR}${MANDIR}/man5
134
135install-conf:
136	${INSTALL} -d -m 755 ${DESTDIR}`dirname ${CONFFILE}`
137	${TEST} -f ${DESTDIR}${CONFFILE} -o 	\
138		-f ${DESTDIR}/etc/mail/greylist.except || 	\
139	     ${INSTALL} -m 644 ${SRCDIR}/greylist.conf ${DESTDIR}${CONFFILE}
140	@${TEST} -f ${DESTDIR}/etc/mail/greylist.except && (	 	   \
141		echo "	================================================"; \
142		echo "	 WARNING: the config file name has changed,     "; \
143		echo "	 Please rename /etc/mail/greylist.except, the   "; \
144		echo "	 default name is now in ${CONFFILE}             "; \
145		echo "	================================================"; \
146	) || ${TRUE}
147
148install-db:
149	${INSTALL} -d -m 755 -o ${USER} ${DESTDIR}`dirname ${DUMPFILE}`
150	@${TEST} -f ${DESTDIR}/var/db/greylist.db && (			 	   \
151		echo "	================================================"; \
152		echo "	  WARNING: the dump file location has changed,  "; \
153		echo "	  Please move /var/db/greylist.db, the default  "; \
154		echo "	  location is now in ${DUMPFILE}                "; \
155		echo "	================================================"; \
156	) || ${TRUE}
157
158install: install-daemon-to-bin install-man install-conf install-db
159
160depend:
161	${MKDEP} ${CPPFLAGS} ${CFLAGS} ${SRC}
162
163clean:
164	${RM} -f milter-greylist ${OBJ} ${OBJ_SEQ} ${OBJ_SEQ_FLAG} ${GENSRC} \
165		rc-redhat.sh rc-bsd.sh rc-solaris.sh rc-debian.sh rc-gentoo.sh \
166		rc-suse.sh y.tab.c
167	sync || $(TRUE)
168
169realclean:	clean
170	${RM} -Rf Makefile config.h config.log config.status \
171		 autom4te.cache configure.lineno *.orig *.bak autoscan.log
172	sync || $(TRUE)
173
174distclean:	realclean
175
176rebuild:	clean
177	@echo "=== Making all. MAKEFLAGS=$(MAKEFLAGS)"
178	@$(MAKE) all || ( \
179		echo "==============================================================="; \
180		echo "=== First build failed. Making all sequentially just in case..."; \
181		echo "==============================================================="; \
182		sync || $(TRUE); \
183		$(MAKESEQ) all )
184
185.SUFFIXES:	.o .c .h .y .l
186.l.c:
187	${LEX} -o$@ $<
188.y.c:
189	${YACC} -p`echo $@|${SED} 's/^\([^_]\{1,\}_\).*$$/\1/'` $<
190	${MV} y.tab.c $@
191
192# This is a target for debugging
193start:	milter-greylist
194	./milter-greylist -D -v -p milter-greylist.sock
195