1 /* $NetBSD: softfloat.h,v 1.1 2014/09/03 19:34:26 matt Exp $ */ 2 3 /* This is a derivative work. */ 4 5 /* 6 =============================================================================== 7 8 This C header file is part of the SoftFloat IEC/IEEE Floating-point 9 Arithmetic Package, Release 2a. 10 11 Written by John R. Hauser. This work was made possible in part by the 12 International Computer Science Institute, located at Suite 600, 1947 Center 13 Street, Berkeley, California 94704. Funding was partially provided by the 14 National Science Foundation under grant MIP-9311980. The original version 15 of this code was written as part of a project to build a fixed-point vector 16 processor in collaboration with the University of California at Berkeley, 17 overseen by Profs. Nelson Morgan and John Wawrzynek. More information 18 is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ 19 arithmetic/SoftFloat.html'. 20 21 THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort 22 has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT 23 TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO 24 PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY 25 AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE. 26 27 Derivative works are acceptable, even for commercial purposes, so long as 28 (1) they include prominent notice that the work is derivative, and (2) they 29 include prominent notice akin to these four paragraphs for those parts of 30 this code that are retained. 31 32 =============================================================================== 33 */ 34 35 /* 36 ------------------------------------------------------------------------------- 37 The macro `FLOATX80' must be defined to enable the extended double-precision 38 floating-point format `floatx80'. If this macro is not defined, the 39 `floatx80' type will not be defined, and none of the functions that either 40 input or output the `floatx80' type will be defined. The same applies to 41 the `FLOAT128' macro and the quadruple-precision format `float128'. 42 ------------------------------------------------------------------------------- 43 */ 44 /* #define FLOATX80 */ 45 /* #define FLOAT128 */ 46 47 #include <machine/ieeefp.h> 48 49 /* 50 ------------------------------------------------------------------------------- 51 Software IEC/IEEE floating-point types. 52 ------------------------------------------------------------------------------- 53 */ 54 typedef unsigned int float32; 55 typedef unsigned long long float64; 56 #ifdef FLOATX80 57 typedef struct { 58 unsigned short high; 59 unsigned long long low; 60 } floatx80; 61 #endif 62 #ifdef FLOAT128 63 typedef struct { 64 unsigned long long high, low; 65 } float128; 66 #endif 67 68 /* 69 ------------------------------------------------------------------------------- 70 Software IEC/IEEE floating-point underflow tininess-detection mode. 71 ------------------------------------------------------------------------------- 72 */ 73 #ifndef SOFTFLOAT_FOR_GCC 74 extern int8 float_detect_tininess; 75 #endif 76 enum { 77 float_tininess_after_rounding = 0, 78 float_tininess_before_rounding = 1 79 }; 80 81 /* 82 ------------------------------------------------------------------------------- 83 Software IEC/IEEE floating-point rounding mode. 84 ------------------------------------------------------------------------------- 85 */ 86 extern fp_rnd float_rounding_mode; 87 #define float_round_nearest_even FP_RN 88 #define float_round_to_zero FP_RZ 89 #define float_round_down FP_RM 90 #define float_round_up FP_RP 91 92 /* 93 ------------------------------------------------------------------------------- 94 Software IEC/IEEE floating-point exception flags. 95 ------------------------------------------------------------------------------- 96 */ 97 extern fp_except float_exception_flags; 98 extern fp_except float_exception_mask; 99 enum { 100 float_flag_inexact = FP_X_IMP, 101 float_flag_underflow = FP_X_UFL, 102 float_flag_overflow = FP_X_OFL, 103 float_flag_divbyzero = FP_X_DZ, 104 float_flag_invalid = FP_X_INV 105 }; 106 107 /* 108 ------------------------------------------------------------------------------- 109 Routine to raise any or all of the software IEC/IEEE floating-point 110 exception flags. 111 ------------------------------------------------------------------------------- 112 */ 113 void float_raise( fp_except ); 114 115 /* 116 ------------------------------------------------------------------------------- 117 Software IEC/IEEE integer-to-floating-point conversion routines. 118 ------------------------------------------------------------------------------- 119 */ 120 float32 int32_to_float32( int32 ); 121 float32 uint32_to_float32( uint32 ); 122 float64 int32_to_float64( int32 ); 123 float64 uint32_to_float64( uint32 ); 124 #ifdef FLOATX80 125 floatx80 int32_to_floatx80( int32 ); 126 floatx80 uint32_to_floatx80( uint32 ); 127 #endif 128 #ifdef FLOAT128 129 float128 int32_to_float128( int32 ); 130 float128 uint32_to_float128( uint32 ); 131 #endif 132 float32 int64_to_float32( long long ); 133 float64 int64_to_float64( long long ); 134 #ifdef FLOATX80 135 floatx80 int64_to_floatx80( long long ); 136 #endif 137 #ifdef FLOAT128 138 float128 int64_to_float128( long long ); 139 #endif 140 141 /* 142 ------------------------------------------------------------------------------- 143 Software IEC/IEEE single-precision conversion routines. 144 ------------------------------------------------------------------------------- 145 */ 146 int float32_to_int32( float32 ); 147 int float32_to_int32_round_to_zero( float32 ); 148 unsigned int float32_to_uint32_round_to_zero( float32 ); 149 long long float32_to_int64( float32 ); 150 long long float32_to_int64_round_to_zero( float32 ); 151 float64 float32_to_float64( float32 ); 152 #ifdef FLOATX80 153 floatx80 float32_to_floatx80( float32 ); 154 #endif 155 #ifdef FLOAT128 156 float128 float32_to_float128( float32 ); 157 #endif 158 159 /* 160 ------------------------------------------------------------------------------- 161 Software IEC/IEEE single-precision operations. 162 ------------------------------------------------------------------------------- 163 */ 164 float32 float32_round_to_int( float32 ); 165 float32 float32_add( float32, float32 ); 166 float32 float32_sub( float32, float32 ); 167 float32 float32_mul( float32, float32 ); 168 float32 float32_div( float32, float32 ); 169 float32 float32_rem( float32, float32 ); 170 float32 float32_sqrt( float32 ); 171 flag float32_eq( float32, float32 ); 172 flag float32_le( float32, float32 ); 173 flag float32_lt( float32, float32 ); 174 flag float32_eq_signaling( float32, float32 ); 175 flag float32_le_quiet( float32, float32 ); 176 flag float32_lt_quiet( float32, float32 ); 177 #ifndef SOFTFLOAT_FOR_GCC 178 flag float32_is_signaling_nan( float32 ); 179 #endif 180 181 /* 182 ------------------------------------------------------------------------------- 183 Software IEC/IEEE double-precision conversion routines. 184 ------------------------------------------------------------------------------- 185 */ 186 int float64_to_int32( float64 ); 187 int float64_to_int32_round_to_zero( float64 ); 188 unsigned int float64_to_uint32_round_to_zero( float64 ); 189 long long float64_to_int64( float64 ); 190 long long float64_to_int64_round_to_zero( float64 ); 191 float32 float64_to_float32( float64 ); 192 #ifdef FLOATX80 193 floatx80 float64_to_floatx80( float64 ); 194 #endif 195 #ifdef FLOAT128 196 float128 float64_to_float128( float64 ); 197 #endif 198 199 /* 200 ------------------------------------------------------------------------------- 201 Software IEC/IEEE double-precision operations. 202 ------------------------------------------------------------------------------- 203 */ 204 float64 float64_round_to_int( float64 ); 205 float64 float64_add( float64, float64 ); 206 float64 float64_sub( float64, float64 ); 207 float64 float64_mul( float64, float64 ); 208 float64 float64_div( float64, float64 ); 209 float64 float64_rem( float64, float64 ); 210 float64 float64_sqrt( float64 ); 211 flag float64_eq( float64, float64 ); 212 flag float64_le( float64, float64 ); 213 flag float64_lt( float64, float64 ); 214 flag float64_eq_signaling( float64, float64 ); 215 flag float64_le_quiet( float64, float64 ); 216 flag float64_lt_quiet( float64, float64 ); 217 #ifndef SOFTFLOAT_FOR_GCC 218 flag float64_is_signaling_nan( float64 ); 219 #endif 220 221 #ifdef FLOATX80 222 223 /* 224 ------------------------------------------------------------------------------- 225 Software IEC/IEEE extended double-precision conversion routines. 226 ------------------------------------------------------------------------------- 227 */ 228 int floatx80_to_int32( floatx80 ); 229 int floatx80_to_int32_round_to_zero( floatx80 ); 230 long long floatx80_to_int64( floatx80 ); 231 long long floatx80_to_int64_round_to_zero( floatx80 ); 232 float32 floatx80_to_float32( floatx80 ); 233 float64 floatx80_to_float64( floatx80 ); 234 #ifdef FLOAT128 235 float128 floatx80_to_float128( floatx80 ); 236 #endif 237 238 /* 239 ------------------------------------------------------------------------------- 240 Software IEC/IEEE extended double-precision rounding precision. Valid 241 values are 32, 64, and 80. 242 ------------------------------------------------------------------------------- 243 */ 244 extern int floatx80_rounding_precision; 245 246 /* 247 ------------------------------------------------------------------------------- 248 Software IEC/IEEE extended double-precision operations. 249 ------------------------------------------------------------------------------- 250 */ 251 floatx80 floatx80_round_to_int( floatx80 ); 252 floatx80 floatx80_add( floatx80, floatx80 ); 253 floatx80 floatx80_sub( floatx80, floatx80 ); 254 floatx80 floatx80_mul( floatx80, floatx80 ); 255 floatx80 floatx80_div( floatx80, floatx80 ); 256 floatx80 floatx80_rem( floatx80, floatx80 ); 257 floatx80 floatx80_sqrt( floatx80 ); 258 flag floatx80_eq( floatx80, floatx80 ); 259 flag floatx80_le( floatx80, floatx80 ); 260 flag floatx80_lt( floatx80, floatx80 ); 261 flag floatx80_eq_signaling( floatx80, floatx80 ); 262 flag floatx80_le_quiet( floatx80, floatx80 ); 263 flag floatx80_lt_quiet( floatx80, floatx80 ); 264 flag floatx80_is_signaling_nan( floatx80 ); 265 266 #endif 267 268 #ifdef FLOAT128 269 270 /* 271 ------------------------------------------------------------------------------- 272 Software IEC/IEEE quadruple-precision conversion routines. 273 ------------------------------------------------------------------------------- 274 */ 275 int float128_to_int32( float128 ); 276 int float128_to_int32_round_to_zero( float128 ); 277 long long float128_to_int64( float128 ); 278 long long float128_to_int64_round_to_zero( float128 ); 279 float32 float128_to_float32( float128 ); 280 float64 float128_to_float64( float128 ); 281 #ifdef FLOATX80 282 floatx80 float128_to_floatx80( float128 ); 283 #endif 284 285 /* 286 ------------------------------------------------------------------------------- 287 Software IEC/IEEE quadruple-precision operations. 288 ------------------------------------------------------------------------------- 289 */ 290 float128 float128_round_to_int( float128 ); 291 float128 float128_add( float128, float128 ); 292 float128 float128_sub( float128, float128 ); 293 float128 float128_mul( float128, float128 ); 294 float128 float128_div( float128, float128 ); 295 float128 float128_rem( float128, float128 ); 296 float128 float128_sqrt( float128 ); 297 flag float128_eq( float128, float128 ); 298 flag float128_le( float128, float128 ); 299 flag float128_lt( float128, float128 ); 300 flag float128_eq_signaling( float128, float128 ); 301 flag float128_le_quiet( float128, float128 ); 302 flag float128_lt_quiet( float128, float128 ); 303 flag float128_is_signaling_nan( float128 ); 304 305 #endif 306