1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 #ifndef _ASM_POWERPC_IO_H
3 #define _ASM_POWERPC_IO_H
4 #ifdef __KERNEL__
5
6 #define ARCH_HAS_IOREMAP_WC
7 #ifdef CONFIG_PPC32
8 #define ARCH_HAS_IOREMAP_WT
9 #endif
10
11 /*
12 */
13
14 /* Check of existence of legacy devices */
15 extern int check_legacy_ioport(unsigned long base_port);
16 #define I8042_DATA_REG 0x60
17 #define FDC_BASE 0x3f0
18
19 #if defined(CONFIG_PPC64) && defined(CONFIG_PCI)
20 extern struct pci_dev *isa_bridge_pcidev;
21 /*
22 * has legacy ISA devices ?
23 */
24 #define arch_has_dev_port() (isa_bridge_pcidev != NULL || isa_io_special)
25 #endif
26
27 #include <linux/device.h>
28 #include <linux/compiler.h>
29 #include <linux/mm.h>
30 #include <asm/page.h>
31 #include <asm/byteorder.h>
32 #include <asm/synch.h>
33 #include <asm/delay.h>
34 #include <asm/mmiowb.h>
35 #include <asm/mmu.h>
36 #include <asm/ppc_asm.h>
37
38 #define SIO_CONFIG_RA 0x398
39 #define SIO_CONFIG_RD 0x399
40
41 #define SLOW_DOWN_IO
42
43 /* 32 bits uses slightly different variables for the various IO
44 * bases. Most of this file only uses _IO_BASE though which we
45 * define properly based on the platform
46 */
47 #ifndef CONFIG_PCI
48 #define _IO_BASE 0
49 #define _ISA_MEM_BASE 0
50 #define PCI_DRAM_OFFSET 0
51 #elif defined(CONFIG_PPC32)
52 #define _IO_BASE isa_io_base
53 #define _ISA_MEM_BASE isa_mem_base
54 #define PCI_DRAM_OFFSET pci_dram_offset
55 #else
56 #define _IO_BASE pci_io_base
57 #define _ISA_MEM_BASE isa_mem_base
58 #define PCI_DRAM_OFFSET 0
59 #endif
60
61 extern unsigned long isa_io_base;
62 extern unsigned long pci_io_base;
63 extern unsigned long pci_dram_offset;
64
65 extern resource_size_t isa_mem_base;
66
67 /* Boolean set by platform if PIO accesses are suppored while _IO_BASE
68 * is not set or addresses cannot be translated to MMIO. This is typically
69 * set when the platform supports "special" PIO accesses via a non memory
70 * mapped mechanism, and allows things like the early udbg UART code to
71 * function.
72 */
73 extern bool isa_io_special;
74
75 #ifdef CONFIG_PPC32
76 #if defined(CONFIG_PPC_INDIRECT_PIO) || defined(CONFIG_PPC_INDIRECT_MMIO)
77 #error CONFIG_PPC_INDIRECT_{PIO,MMIO} are not yet supported on 32 bits
78 #endif
79 #endif
80
81 /*
82 *
83 * Low level MMIO accessors
84 *
85 * This provides the non-bus specific accessors to MMIO. Those are PowerPC
86 * specific and thus shouldn't be used in generic code. The accessors
87 * provided here are:
88 *
89 * in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64
90 * out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64
91 * _insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns
92 *
93 * Those operate directly on a kernel virtual address. Note that the prototype
94 * for the out_* accessors has the arguments in opposite order from the usual
95 * linux PCI accessors. Unlike those, they take the address first and the value
96 * next.
97 *
98 * Note: I might drop the _ns suffix on the stream operations soon as it is
99 * simply normal for stream operations to not swap in the first place.
100 *
101 */
102
103 #define DEF_MMIO_IN_X(name, size, insn) \
104 static inline u##size name(const volatile u##size __iomem *addr) \
105 { \
106 u##size ret; \
107 __asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync" \
108 : "=r" (ret) : "Z" (*addr) : "memory"); \
109 return ret; \
110 }
111
112 #define DEF_MMIO_OUT_X(name, size, insn) \
113 static inline void name(volatile u##size __iomem *addr, u##size val) \
114 { \
115 __asm__ __volatile__("sync;"#insn" %1,%y0" \
116 : "=Z" (*addr) : "r" (val) : "memory"); \
117 mmiowb_set_pending(); \
118 }
119
120 #define DEF_MMIO_IN_D(name, size, insn) \
121 static inline u##size name(const volatile u##size __iomem *addr) \
122 { \
123 u##size ret; \
124 __asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
125 : "=r" (ret) : "m"UPD_CONSTR (*addr) : "memory"); \
126 return ret; \
127 }
128
129 #define DEF_MMIO_OUT_D(name, size, insn) \
130 static inline void name(volatile u##size __iomem *addr, u##size val) \
131 { \
132 __asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0" \
133 : "=m"UPD_CONSTR (*addr) : "r" (val) : "memory"); \
134 mmiowb_set_pending(); \
135 }
136
137 DEF_MMIO_IN_D(in_8, 8, lbz);
138 DEF_MMIO_OUT_D(out_8, 8, stb);
139
140 #ifdef __BIG_ENDIAN__
141 DEF_MMIO_IN_D(in_be16, 16, lhz);
142 DEF_MMIO_IN_D(in_be32, 32, lwz);
143 DEF_MMIO_IN_X(in_le16, 16, lhbrx);
144 DEF_MMIO_IN_X(in_le32, 32, lwbrx);
145
146 DEF_MMIO_OUT_D(out_be16, 16, sth);
147 DEF_MMIO_OUT_D(out_be32, 32, stw);
148 DEF_MMIO_OUT_X(out_le16, 16, sthbrx);
149 DEF_MMIO_OUT_X(out_le32, 32, stwbrx);
150 #else
151 DEF_MMIO_IN_X(in_be16, 16, lhbrx);
152 DEF_MMIO_IN_X(in_be32, 32, lwbrx);
153 DEF_MMIO_IN_D(in_le16, 16, lhz);
154 DEF_MMIO_IN_D(in_le32, 32, lwz);
155
156 DEF_MMIO_OUT_X(out_be16, 16, sthbrx);
157 DEF_MMIO_OUT_X(out_be32, 32, stwbrx);
158 DEF_MMIO_OUT_D(out_le16, 16, sth);
159 DEF_MMIO_OUT_D(out_le32, 32, stw);
160
161 #endif /* __BIG_ENDIAN */
162
163 #ifdef __powerpc64__
164
165 #ifdef __BIG_ENDIAN__
166 DEF_MMIO_OUT_D(out_be64, 64, std);
167 DEF_MMIO_IN_D(in_be64, 64, ld);
168
169 /* There is no asm instructions for 64 bits reverse loads and stores */
in_le64(const volatile u64 __iomem * addr)170 static inline u64 in_le64(const volatile u64 __iomem *addr)
171 {
172 return swab64(in_be64(addr));
173 }
174
out_le64(volatile u64 __iomem * addr,u64 val)175 static inline void out_le64(volatile u64 __iomem *addr, u64 val)
176 {
177 out_be64(addr, swab64(val));
178 }
179 #else
180 DEF_MMIO_OUT_D(out_le64, 64, std);
181 DEF_MMIO_IN_D(in_le64, 64, ld);
182
183 /* There is no asm instructions for 64 bits reverse loads and stores */
in_be64(const volatile u64 __iomem * addr)184 static inline u64 in_be64(const volatile u64 __iomem *addr)
185 {
186 return swab64(in_le64(addr));
187 }
188
out_be64(volatile u64 __iomem * addr,u64 val)189 static inline void out_be64(volatile u64 __iomem *addr, u64 val)
190 {
191 out_le64(addr, swab64(val));
192 }
193
194 #endif
195 #endif /* __powerpc64__ */
196
197 /*
198 * Low level IO stream instructions are defined out of line for now
199 */
200 extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
201 extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
202 extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count);
203 extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count);
204 extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count);
205 extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count);
206
207 /* The _ns naming is historical and will be removed. For now, just #define
208 * the non _ns equivalent names
209 */
210 #define _insw _insw_ns
211 #define _insl _insl_ns
212 #define _outsw _outsw_ns
213 #define _outsl _outsl_ns
214
215
216 /*
217 * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line
218 */
219
220 extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n);
221 extern void _memcpy_fromio(void *dest, const volatile void __iomem *src,
222 unsigned long n);
223 extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
224 unsigned long n);
225
226 /*
227 *
228 * PCI and standard ISA accessors
229 *
230 * Those are globally defined linux accessors for devices on PCI or ISA
231 * busses. They follow the Linux defined semantics. The current implementation
232 * for PowerPC is as close as possible to the x86 version of these, and thus
233 * provides fairly heavy weight barriers for the non-raw versions
234 *
235 * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_MMIO
236 * or CONFIG_PPC_INDIRECT_PIO are set allowing the platform to provide its
237 * own implementation of some or all of the accessors.
238 */
239
240 /*
241 * Include the EEH definitions when EEH is enabled only so they don't get
242 * in the way when building for 32 bits
243 */
244 #ifdef CONFIG_EEH
245 #include <asm/eeh.h>
246 #endif
247
248 /* Shortcut to the MMIO argument pointer */
249 #define PCI_IO_ADDR volatile void __iomem *
250
251 /* Indirect IO address tokens:
252 *
253 * When CONFIG_PPC_INDIRECT_MMIO is set, the platform can provide hooks
254 * on all MMIOs. (Note that this is all 64 bits only for now)
255 *
256 * To help platforms who may need to differentiate MMIO addresses in
257 * their hooks, a bitfield is reserved for use by the platform near the
258 * top of MMIO addresses (not PIO, those have to cope the hard way).
259 *
260 * The highest address in the kernel virtual space are:
261 *
262 * d0003fffffffffff # with Hash MMU
263 * c00fffffffffffff # with Radix MMU
264 *
265 * The top 4 bits are reserved as the region ID on hash, leaving us 8 bits
266 * that can be used for the field.
267 *
268 * The direct IO mapping operations will then mask off those bits
269 * before doing the actual access, though that only happen when
270 * CONFIG_PPC_INDIRECT_MMIO is set, thus be careful when you use that
271 * mechanism
272 *
273 * For PIO, there is a separate CONFIG_PPC_INDIRECT_PIO which makes
274 * all PIO functions call through a hook.
275 */
276
277 #ifdef CONFIG_PPC_INDIRECT_MMIO
278 #define PCI_IO_IND_TOKEN_SHIFT 52
279 #define PCI_IO_IND_TOKEN_MASK (0xfful << PCI_IO_IND_TOKEN_SHIFT)
280 #define PCI_FIX_ADDR(addr) \
281 ((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK))
282 #define PCI_GET_ADDR_TOKEN(addr) \
283 (((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> \
284 PCI_IO_IND_TOKEN_SHIFT)
285 #define PCI_SET_ADDR_TOKEN(addr, token) \
286 do { \
287 unsigned long __a = (unsigned long)(addr); \
288 __a &= ~PCI_IO_IND_TOKEN_MASK; \
289 __a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT; \
290 (addr) = (void __iomem *)__a; \
291 } while(0)
292 #else
293 #define PCI_FIX_ADDR(addr) (addr)
294 #endif
295
296
297 /*
298 * Non ordered and non-swapping "raw" accessors
299 */
300
__raw_readb(const volatile void __iomem * addr)301 static inline unsigned char __raw_readb(const volatile void __iomem *addr)
302 {
303 return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr);
304 }
305 #define __raw_readb __raw_readb
306
__raw_readw(const volatile void __iomem * addr)307 static inline unsigned short __raw_readw(const volatile void __iomem *addr)
308 {
309 return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr);
310 }
311 #define __raw_readw __raw_readw
312
__raw_readl(const volatile void __iomem * addr)313 static inline unsigned int __raw_readl(const volatile void __iomem *addr)
314 {
315 return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr);
316 }
317 #define __raw_readl __raw_readl
318
__raw_writeb(unsigned char v,volatile void __iomem * addr)319 static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
320 {
321 *(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v;
322 }
323 #define __raw_writeb __raw_writeb
324
__raw_writew(unsigned short v,volatile void __iomem * addr)325 static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
326 {
327 *(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v;
328 }
329 #define __raw_writew __raw_writew
330
__raw_writel(unsigned int v,volatile void __iomem * addr)331 static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
332 {
333 *(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
334 }
335 #define __raw_writel __raw_writel
336
337 #ifdef __powerpc64__
__raw_readq(const volatile void __iomem * addr)338 static inline unsigned long __raw_readq(const volatile void __iomem *addr)
339 {
340 return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr);
341 }
342 #define __raw_readq __raw_readq
343
__raw_writeq(unsigned long v,volatile void __iomem * addr)344 static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
345 {
346 *(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v;
347 }
348 #define __raw_writeq __raw_writeq
349
__raw_writeq_be(unsigned long v,volatile void __iomem * addr)350 static inline void __raw_writeq_be(unsigned long v, volatile void __iomem *addr)
351 {
352 __raw_writeq((__force unsigned long)cpu_to_be64(v), addr);
353 }
354 #define __raw_writeq_be __raw_writeq_be
355
356 /*
357 * Real mode versions of the above. Those instructions are only supposed
358 * to be used in hypervisor real mode as per the architecture spec.
359 */
__raw_rm_writeb(u8 val,volatile void __iomem * paddr)360 static inline void __raw_rm_writeb(u8 val, volatile void __iomem *paddr)
361 {
362 __asm__ __volatile__("stbcix %0,0,%1"
363 : : "r" (val), "r" (paddr) : "memory");
364 }
365
__raw_rm_writew(u16 val,volatile void __iomem * paddr)366 static inline void __raw_rm_writew(u16 val, volatile void __iomem *paddr)
367 {
368 __asm__ __volatile__("sthcix %0,0,%1"
369 : : "r" (val), "r" (paddr) : "memory");
370 }
371
__raw_rm_writel(u32 val,volatile void __iomem * paddr)372 static inline void __raw_rm_writel(u32 val, volatile void __iomem *paddr)
373 {
374 __asm__ __volatile__("stwcix %0,0,%1"
375 : : "r" (val), "r" (paddr) : "memory");
376 }
377
__raw_rm_writeq(u64 val,volatile void __iomem * paddr)378 static inline void __raw_rm_writeq(u64 val, volatile void __iomem *paddr)
379 {
380 __asm__ __volatile__("stdcix %0,0,%1"
381 : : "r" (val), "r" (paddr) : "memory");
382 }
383
__raw_rm_writeq_be(u64 val,volatile void __iomem * paddr)384 static inline void __raw_rm_writeq_be(u64 val, volatile void __iomem *paddr)
385 {
386 __raw_rm_writeq((__force u64)cpu_to_be64(val), paddr);
387 }
388
__raw_rm_readb(volatile void __iomem * paddr)389 static inline u8 __raw_rm_readb(volatile void __iomem *paddr)
390 {
391 u8 ret;
392 __asm__ __volatile__("lbzcix %0,0, %1"
393 : "=r" (ret) : "r" (paddr) : "memory");
394 return ret;
395 }
396
__raw_rm_readw(volatile void __iomem * paddr)397 static inline u16 __raw_rm_readw(volatile void __iomem *paddr)
398 {
399 u16 ret;
400 __asm__ __volatile__("lhzcix %0,0, %1"
401 : "=r" (ret) : "r" (paddr) : "memory");
402 return ret;
403 }
404
__raw_rm_readl(volatile void __iomem * paddr)405 static inline u32 __raw_rm_readl(volatile void __iomem *paddr)
406 {
407 u32 ret;
408 __asm__ __volatile__("lwzcix %0,0, %1"
409 : "=r" (ret) : "r" (paddr) : "memory");
410 return ret;
411 }
412
__raw_rm_readq(volatile void __iomem * paddr)413 static inline u64 __raw_rm_readq(volatile void __iomem *paddr)
414 {
415 u64 ret;
416 __asm__ __volatile__("ldcix %0,0, %1"
417 : "=r" (ret) : "r" (paddr) : "memory");
418 return ret;
419 }
420 #endif /* __powerpc64__ */
421
422 /*
423 *
424 * PCI PIO and MMIO accessors.
425 *
426 *
427 * On 32 bits, PIO operations have a recovery mechanism in case they trigger
428 * machine checks (which they occasionally do when probing non existing
429 * IO ports on some platforms, like PowerMac and 8xx).
430 * I always found it to be of dubious reliability and I am tempted to get
431 * rid of it one of these days. So if you think it's important to keep it,
432 * please voice up asap. We never had it for 64 bits and I do not intend
433 * to port it over
434 */
435
436 #ifdef CONFIG_PPC32
437
438 #define __do_in_asm(name, op) \
439 static inline unsigned int name(unsigned int port) \
440 { \
441 unsigned int x; \
442 __asm__ __volatile__( \
443 "sync\n" \
444 "0:" op " %0,0,%1\n" \
445 "1: twi 0,%0,0\n" \
446 "2: isync\n" \
447 "3: nop\n" \
448 "4:\n" \
449 ".section .fixup,\"ax\"\n" \
450 "5: li %0,-1\n" \
451 " b 4b\n" \
452 ".previous\n" \
453 EX_TABLE(0b, 5b) \
454 EX_TABLE(1b, 5b) \
455 EX_TABLE(2b, 5b) \
456 EX_TABLE(3b, 5b) \
457 : "=&r" (x) \
458 : "r" (port + _IO_BASE) \
459 : "memory"); \
460 return x; \
461 }
462
463 #define __do_out_asm(name, op) \
464 static inline void name(unsigned int val, unsigned int port) \
465 { \
466 __asm__ __volatile__( \
467 "sync\n" \
468 "0:" op " %0,0,%1\n" \
469 "1: sync\n" \
470 "2:\n" \
471 EX_TABLE(0b, 2b) \
472 EX_TABLE(1b, 2b) \
473 : : "r" (val), "r" (port + _IO_BASE) \
474 : "memory"); \
475 }
476
477 __do_in_asm(_rec_inb, "lbzx")
478 __do_in_asm(_rec_inw, "lhbrx")
479 __do_in_asm(_rec_inl, "lwbrx")
480 __do_out_asm(_rec_outb, "stbx")
481 __do_out_asm(_rec_outw, "sthbrx")
482 __do_out_asm(_rec_outl, "stwbrx")
483
484 #endif /* CONFIG_PPC32 */
485
486 /* The "__do_*" operations below provide the actual "base" implementation
487 * for each of the defined accessors. Some of them use the out_* functions
488 * directly, some of them still use EEH, though we might change that in the
489 * future. Those macros below provide the necessary argument swapping and
490 * handling of the IO base for PIO.
491 *
492 * They are themselves used by the macros that define the actual accessors
493 * and can be used by the hooks if any.
494 *
495 * Note that PIO operations are always defined in terms of their corresonding
496 * MMIO operations. That allows platforms like iSeries who want to modify the
497 * behaviour of both to only hook on the MMIO version and get both. It's also
498 * possible to hook directly at the toplevel PIO operation if they have to
499 * be handled differently
500 */
501 #define __do_writeb(val, addr) out_8(PCI_FIX_ADDR(addr), val)
502 #define __do_writew(val, addr) out_le16(PCI_FIX_ADDR(addr), val)
503 #define __do_writel(val, addr) out_le32(PCI_FIX_ADDR(addr), val)
504 #define __do_writeq(val, addr) out_le64(PCI_FIX_ADDR(addr), val)
505 #define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val)
506 #define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val)
507 #define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val)
508
509 #ifdef CONFIG_EEH
510 #define __do_readb(addr) eeh_readb(PCI_FIX_ADDR(addr))
511 #define __do_readw(addr) eeh_readw(PCI_FIX_ADDR(addr))
512 #define __do_readl(addr) eeh_readl(PCI_FIX_ADDR(addr))
513 #define __do_readq(addr) eeh_readq(PCI_FIX_ADDR(addr))
514 #define __do_readw_be(addr) eeh_readw_be(PCI_FIX_ADDR(addr))
515 #define __do_readl_be(addr) eeh_readl_be(PCI_FIX_ADDR(addr))
516 #define __do_readq_be(addr) eeh_readq_be(PCI_FIX_ADDR(addr))
517 #else /* CONFIG_EEH */
518 #define __do_readb(addr) in_8(PCI_FIX_ADDR(addr))
519 #define __do_readw(addr) in_le16(PCI_FIX_ADDR(addr))
520 #define __do_readl(addr) in_le32(PCI_FIX_ADDR(addr))
521 #define __do_readq(addr) in_le64(PCI_FIX_ADDR(addr))
522 #define __do_readw_be(addr) in_be16(PCI_FIX_ADDR(addr))
523 #define __do_readl_be(addr) in_be32(PCI_FIX_ADDR(addr))
524 #define __do_readq_be(addr) in_be64(PCI_FIX_ADDR(addr))
525 #endif /* !defined(CONFIG_EEH) */
526
527 #ifdef CONFIG_PPC32
528 #define __do_outb(val, port) _rec_outb(val, port)
529 #define __do_outw(val, port) _rec_outw(val, port)
530 #define __do_outl(val, port) _rec_outl(val, port)
531 #define __do_inb(port) _rec_inb(port)
532 #define __do_inw(port) _rec_inw(port)
533 #define __do_inl(port) _rec_inl(port)
534 #else /* CONFIG_PPC32 */
535 #define __do_outb(val, port) writeb(val,(PCI_IO_ADDR)_IO_BASE+port);
536 #define __do_outw(val, port) writew(val,(PCI_IO_ADDR)_IO_BASE+port);
537 #define __do_outl(val, port) writel(val,(PCI_IO_ADDR)_IO_BASE+port);
538 #define __do_inb(port) readb((PCI_IO_ADDR)_IO_BASE + port);
539 #define __do_inw(port) readw((PCI_IO_ADDR)_IO_BASE + port);
540 #define __do_inl(port) readl((PCI_IO_ADDR)_IO_BASE + port);
541 #endif /* !CONFIG_PPC32 */
542
543 #ifdef CONFIG_EEH
544 #define __do_readsb(a, b, n) eeh_readsb(PCI_FIX_ADDR(a), (b), (n))
545 #define __do_readsw(a, b, n) eeh_readsw(PCI_FIX_ADDR(a), (b), (n))
546 #define __do_readsl(a, b, n) eeh_readsl(PCI_FIX_ADDR(a), (b), (n))
547 #else /* CONFIG_EEH */
548 #define __do_readsb(a, b, n) _insb(PCI_FIX_ADDR(a), (b), (n))
549 #define __do_readsw(a, b, n) _insw(PCI_FIX_ADDR(a), (b), (n))
550 #define __do_readsl(a, b, n) _insl(PCI_FIX_ADDR(a), (b), (n))
551 #endif /* !CONFIG_EEH */
552 #define __do_writesb(a, b, n) _outsb(PCI_FIX_ADDR(a),(b),(n))
553 #define __do_writesw(a, b, n) _outsw(PCI_FIX_ADDR(a),(b),(n))
554 #define __do_writesl(a, b, n) _outsl(PCI_FIX_ADDR(a),(b),(n))
555
556 #define __do_insb(p, b, n) readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
557 #define __do_insw(p, b, n) readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
558 #define __do_insl(p, b, n) readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
559 #define __do_outsb(p, b, n) writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
560 #define __do_outsw(p, b, n) writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
561 #define __do_outsl(p, b, n) writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
562
563 #define __do_memset_io(addr, c, n) \
564 _memset_io(PCI_FIX_ADDR(addr), c, n)
565 #define __do_memcpy_toio(dst, src, n) \
566 _memcpy_toio(PCI_FIX_ADDR(dst), src, n)
567
568 #ifdef CONFIG_EEH
569 #define __do_memcpy_fromio(dst, src, n) \
570 eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n)
571 #else /* CONFIG_EEH */
572 #define __do_memcpy_fromio(dst, src, n) \
573 _memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
574 #endif /* !CONFIG_EEH */
575
576 #ifdef CONFIG_PPC_INDIRECT_PIO
577 #define DEF_PCI_HOOK_pio(x) x
578 #else
579 #define DEF_PCI_HOOK_pio(x) NULL
580 #endif
581
582 #ifdef CONFIG_PPC_INDIRECT_MMIO
583 #define DEF_PCI_HOOK_mem(x) x
584 #else
585 #define DEF_PCI_HOOK_mem(x) NULL
586 #endif
587
588 /* Structure containing all the hooks */
589 extern struct ppc_pci_io {
590
591 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa) ret (*name) at;
592 #define DEF_PCI_AC_NORET(name, at, al, space, aa) void (*name) at;
593
594 #include <asm/io-defs.h>
595
596 #undef DEF_PCI_AC_RET
597 #undef DEF_PCI_AC_NORET
598
599 } ppc_pci_io;
600
601 /* The inline wrappers */
602 #define DEF_PCI_AC_RET(name, ret, at, al, space, aa) \
603 static inline ret name at \
604 { \
605 if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL) \
606 return ppc_pci_io.name al; \
607 return __do_##name al; \
608 }
609
610 #define DEF_PCI_AC_NORET(name, at, al, space, aa) \
611 static inline void name at \
612 { \
613 if (DEF_PCI_HOOK_##space(ppc_pci_io.name) != NULL) \
614 ppc_pci_io.name al; \
615 else \
616 __do_##name al; \
617 }
618
619 #include <asm/io-defs.h>
620
621 #undef DEF_PCI_AC_RET
622 #undef DEF_PCI_AC_NORET
623
624 /* Some drivers check for the presence of readq & writeq with
625 * a #ifdef, so we make them happy here.
626 */
627 #define readb readb
628 #define readw readw
629 #define readl readl
630 #define writeb writeb
631 #define writew writew
632 #define writel writel
633 #define readsb readsb
634 #define readsw readsw
635 #define readsl readsl
636 #define writesb writesb
637 #define writesw writesw
638 #define writesl writesl
639 #define inb inb
640 #define inw inw
641 #define inl inl
642 #define outb outb
643 #define outw outw
644 #define outl outl
645 #define insb insb
646 #define insw insw
647 #define insl insl
648 #define outsb outsb
649 #define outsw outsw
650 #define outsl outsl
651 #ifdef __powerpc64__
652 #define readq readq
653 #define writeq writeq
654 #endif
655 #define memset_io memset_io
656 #define memcpy_fromio memcpy_fromio
657 #define memcpy_toio memcpy_toio
658
659 /*
660 * Convert a physical pointer to a virtual kernel pointer for /dev/mem
661 * access
662 */
663 #define xlate_dev_mem_ptr(p) __va(p)
664
665 /*
666 * We don't do relaxed operations yet, at least not with this semantic
667 */
668 #define readb_relaxed(addr) readb(addr)
669 #define readw_relaxed(addr) readw(addr)
670 #define readl_relaxed(addr) readl(addr)
671 #define readq_relaxed(addr) readq(addr)
672 #define writeb_relaxed(v, addr) writeb(v, addr)
673 #define writew_relaxed(v, addr) writew(v, addr)
674 #define writel_relaxed(v, addr) writel(v, addr)
675 #define writeq_relaxed(v, addr) writeq(v, addr)
676
677 #ifdef CONFIG_GENERIC_IOMAP
678 #include <asm-generic/iomap.h>
679 #else
680 /*
681 * Here comes the implementation of the IOMAP interfaces.
682 */
ioread16be(const void __iomem * addr)683 static inline unsigned int ioread16be(const void __iomem *addr)
684 {
685 return readw_be(addr);
686 }
687 #define ioread16be ioread16be
688
ioread32be(const void __iomem * addr)689 static inline unsigned int ioread32be(const void __iomem *addr)
690 {
691 return readl_be(addr);
692 }
693 #define ioread32be ioread32be
694
695 #ifdef __powerpc64__
ioread64_lo_hi(const void __iomem * addr)696 static inline u64 ioread64_lo_hi(const void __iomem *addr)
697 {
698 return readq(addr);
699 }
700 #define ioread64_lo_hi ioread64_lo_hi
701
ioread64_hi_lo(const void __iomem * addr)702 static inline u64 ioread64_hi_lo(const void __iomem *addr)
703 {
704 return readq(addr);
705 }
706 #define ioread64_hi_lo ioread64_hi_lo
707
ioread64be(const void __iomem * addr)708 static inline u64 ioread64be(const void __iomem *addr)
709 {
710 return readq_be(addr);
711 }
712 #define ioread64be ioread64be
713
ioread64be_lo_hi(const void __iomem * addr)714 static inline u64 ioread64be_lo_hi(const void __iomem *addr)
715 {
716 return readq_be(addr);
717 }
718 #define ioread64be_lo_hi ioread64be_lo_hi
719
ioread64be_hi_lo(const void __iomem * addr)720 static inline u64 ioread64be_hi_lo(const void __iomem *addr)
721 {
722 return readq_be(addr);
723 }
724 #define ioread64be_hi_lo ioread64be_hi_lo
725 #endif /* __powerpc64__ */
726
iowrite16be(u16 val,void __iomem * addr)727 static inline void iowrite16be(u16 val, void __iomem *addr)
728 {
729 writew_be(val, addr);
730 }
731 #define iowrite16be iowrite16be
732
iowrite32be(u32 val,void __iomem * addr)733 static inline void iowrite32be(u32 val, void __iomem *addr)
734 {
735 writel_be(val, addr);
736 }
737 #define iowrite32be iowrite32be
738
739 #ifdef __powerpc64__
iowrite64_lo_hi(u64 val,void __iomem * addr)740 static inline void iowrite64_lo_hi(u64 val, void __iomem *addr)
741 {
742 writeq(val, addr);
743 }
744 #define iowrite64_lo_hi iowrite64_lo_hi
745
iowrite64_hi_lo(u64 val,void __iomem * addr)746 static inline void iowrite64_hi_lo(u64 val, void __iomem *addr)
747 {
748 writeq(val, addr);
749 }
750 #define iowrite64_hi_lo iowrite64_hi_lo
751
iowrite64be(u64 val,void __iomem * addr)752 static inline void iowrite64be(u64 val, void __iomem *addr)
753 {
754 writeq_be(val, addr);
755 }
756 #define iowrite64be iowrite64be
757
iowrite64be_lo_hi(u64 val,void __iomem * addr)758 static inline void iowrite64be_lo_hi(u64 val, void __iomem *addr)
759 {
760 writeq_be(val, addr);
761 }
762 #define iowrite64be_lo_hi iowrite64be_lo_hi
763
iowrite64be_hi_lo(u64 val,void __iomem * addr)764 static inline void iowrite64be_hi_lo(u64 val, void __iomem *addr)
765 {
766 writeq_be(val, addr);
767 }
768 #define iowrite64be_hi_lo iowrite64be_hi_lo
769 #endif /* __powerpc64__ */
770
771 struct pci_dev;
772 void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
773 #define pci_iounmap pci_iounmap
774 void __iomem *ioport_map(unsigned long port, unsigned int len);
775 #define ioport_map ioport_map
776 #endif
777
iosync(void)778 static inline void iosync(void)
779 {
780 __asm__ __volatile__ ("sync" : : : "memory");
781 }
782
783 /* Enforce in-order execution of data I/O.
784 * No distinction between read/write on PPC; use eieio for all three.
785 * Those are fairly week though. They don't provide a barrier between
786 * MMIO and cacheable storage nor do they provide a barrier vs. locks,
787 * they only provide barriers between 2 __raw MMIO operations and
788 * possibly break write combining.
789 */
790 #define iobarrier_rw() eieio()
791 #define iobarrier_r() eieio()
792 #define iobarrier_w() eieio()
793
794
795 /*
796 * output pause versions need a delay at least for the
797 * w83c105 ide controller in a p610.
798 */
799 #define inb_p(port) inb(port)
800 #define outb_p(val, port) (udelay(1), outb((val), (port)))
801 #define inw_p(port) inw(port)
802 #define outw_p(val, port) (udelay(1), outw((val), (port)))
803 #define inl_p(port) inl(port)
804 #define outl_p(val, port) (udelay(1), outl((val), (port)))
805
806
807 #define IO_SPACE_LIMIT ~(0UL)
808
809 /**
810 * ioremap - map bus memory into CPU space
811 * @address: bus address of the memory
812 * @size: size of the resource to map
813 *
814 * ioremap performs a platform specific sequence of operations to
815 * make bus memory CPU accessible via the readb/readw/readl/writeb/
816 * writew/writel functions and the other mmio helpers. The returned
817 * address is not guaranteed to be usable directly as a virtual
818 * address.
819 *
820 * We provide a few variations of it:
821 *
822 * * ioremap is the standard one and provides non-cacheable guarded mappings
823 * and can be hooked by the platform via ppc_md
824 *
825 * * ioremap_prot allows to specify the page flags as an argument and can
826 * also be hooked by the platform via ppc_md.
827 *
828 * * ioremap_wc enables write combining
829 *
830 * * ioremap_wt enables write through
831 *
832 * * ioremap_coherent maps coherent cached memory
833 *
834 * * iounmap undoes such a mapping and can be hooked
835 *
836 * * __ioremap_caller is the same as above but takes an explicit caller
837 * reference rather than using __builtin_return_address(0)
838 *
839 */
840 extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
841 extern void __iomem *ioremap_prot(phys_addr_t address, unsigned long size,
842 unsigned long flags);
843 extern void __iomem *ioremap_wc(phys_addr_t address, unsigned long size);
844 #define ioremap_wc ioremap_wc
845
846 #ifdef CONFIG_PPC32
847 void __iomem *ioremap_wt(phys_addr_t address, unsigned long size);
848 #define ioremap_wt ioremap_wt
849 #endif
850
851 void __iomem *ioremap_coherent(phys_addr_t address, unsigned long size);
852 #define ioremap_uc(addr, size) ioremap((addr), (size))
853 #define ioremap_cache(addr, size) \
854 ioremap_prot((addr), (size), pgprot_val(PAGE_KERNEL))
855
856 extern void iounmap(volatile void __iomem *addr);
857
858 void __iomem *ioremap_phb(phys_addr_t paddr, unsigned long size);
859
860 int early_ioremap_range(unsigned long ea, phys_addr_t pa,
861 unsigned long size, pgprot_t prot);
862 void __iomem *do_ioremap(phys_addr_t pa, phys_addr_t offset, unsigned long size,
863 pgprot_t prot, void *caller);
864
865 extern void __iomem *__ioremap_caller(phys_addr_t, unsigned long size,
866 pgprot_t prot, void *caller);
867
868 /*
869 * When CONFIG_PPC_INDIRECT_PIO is set, we use the generic iomap implementation
870 * which needs some additional definitions here. They basically allow PIO
871 * space overall to be 1GB. This will work as long as we never try to use
872 * iomap to map MMIO below 1GB which should be fine on ppc64
873 */
874 #define HAVE_ARCH_PIO_SIZE 1
875 #define PIO_OFFSET 0x00000000UL
876 #define PIO_MASK (FULL_IO_SIZE - 1)
877 #define PIO_RESERVED (FULL_IO_SIZE)
878
879 #define mmio_read16be(addr) readw_be(addr)
880 #define mmio_read32be(addr) readl_be(addr)
881 #define mmio_read64be(addr) readq_be(addr)
882 #define mmio_write16be(val, addr) writew_be(val, addr)
883 #define mmio_write32be(val, addr) writel_be(val, addr)
884 #define mmio_write64be(val, addr) writeq_be(val, addr)
885 #define mmio_insb(addr, dst, count) readsb(addr, dst, count)
886 #define mmio_insw(addr, dst, count) readsw(addr, dst, count)
887 #define mmio_insl(addr, dst, count) readsl(addr, dst, count)
888 #define mmio_outsb(addr, src, count) writesb(addr, src, count)
889 #define mmio_outsw(addr, src, count) writesw(addr, src, count)
890 #define mmio_outsl(addr, src, count) writesl(addr, src, count)
891
892 /**
893 * virt_to_phys - map virtual addresses to physical
894 * @address: address to remap
895 *
896 * The returned physical address is the physical (CPU) mapping for
897 * the memory address given. It is only valid to use this function on
898 * addresses directly mapped or allocated via kmalloc.
899 *
900 * This function does not give bus mappings for DMA transfers. In
901 * almost all conceivable cases a device driver should not be using
902 * this function
903 */
virt_to_phys(volatile void * address)904 static inline unsigned long virt_to_phys(volatile void * address)
905 {
906 WARN_ON(IS_ENABLED(CONFIG_DEBUG_VIRTUAL) && !virt_addr_valid(address));
907
908 return __pa((unsigned long)address);
909 }
910 #define virt_to_phys virt_to_phys
911
912 /**
913 * phys_to_virt - map physical address to virtual
914 * @address: address to remap
915 *
916 * The returned virtual address is a current CPU mapping for
917 * the memory address given. It is only valid to use this function on
918 * addresses that have a kernel mapping
919 *
920 * This function does not handle bus mappings for DMA transfers. In
921 * almost all conceivable cases a device driver should not be using
922 * this function
923 */
phys_to_virt(unsigned long address)924 static inline void * phys_to_virt(unsigned long address)
925 {
926 return (void *)__va(address);
927 }
928 #define phys_to_virt phys_to_virt
929
930 /*
931 * Change "struct page" to physical address.
932 */
page_to_phys(struct page * page)933 static inline phys_addr_t page_to_phys(struct page *page)
934 {
935 unsigned long pfn = page_to_pfn(page);
936
937 WARN_ON(IS_ENABLED(CONFIG_DEBUG_VIRTUAL) && !pfn_valid(pfn));
938
939 return PFN_PHYS(pfn);
940 }
941
942 /*
943 * 32 bits still uses virt_to_bus() for it's implementation of DMA
944 * mappings se we have to keep it defined here. We also have some old
945 * drivers (shame shame shame) that use bus_to_virt() and haven't been
946 * fixed yet so I need to define it here.
947 */
948 #ifdef CONFIG_PPC32
949
virt_to_bus(volatile void * address)950 static inline unsigned long virt_to_bus(volatile void * address)
951 {
952 if (address == NULL)
953 return 0;
954 return __pa(address) + PCI_DRAM_OFFSET;
955 }
956 #define virt_to_bus virt_to_bus
957
bus_to_virt(unsigned long address)958 static inline void * bus_to_virt(unsigned long address)
959 {
960 if (address == 0)
961 return NULL;
962 return __va(address - PCI_DRAM_OFFSET);
963 }
964 #define bus_to_virt bus_to_virt
965
966 #define page_to_bus(page) (page_to_phys(page) + PCI_DRAM_OFFSET)
967
968 #endif /* CONFIG_PPC32 */
969
970 /* access ports */
971 #define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) | (_v))
972 #define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
973
974 #define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) | (_v))
975 #define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
976
977 #define setbits8(_addr, _v) out_8((_addr), in_8(_addr) | (_v))
978 #define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
979
980 /* Clear and set bits in one shot. These macros can be used to clear and
981 * set multiple bits in a register using a single read-modify-write. These
982 * macros can also be used to set a multiple-bit bit pattern using a mask,
983 * by specifying the mask in the 'clear' parameter and the new bit pattern
984 * in the 'set' parameter.
985 */
986
987 #define clrsetbits(type, addr, clear, set) \
988 out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
989
990 #ifdef __powerpc64__
991 #define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
992 #define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
993 #endif
994
995 #define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
996 #define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
997
998 #define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
999 #define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
1000
1001 #define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
1002
1003 #include <asm-generic/io.h>
1004
1005 #endif /* __KERNEL__ */
1006
1007 #endif /* _ASM_POWERPC_IO_H */
1008