1 #ifndef _QIB_KERNEL_H
2 #define _QIB_KERNEL_H
3 /*
4 * Copyright (c) 2012 - 2017 Intel Corporation. All rights reserved.
5 * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
6 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
7 *
8 * This software is available to you under a choice of one of two
9 * licenses. You may choose to be licensed under the terms of the GNU
10 * General Public License (GPL) Version 2, available from the file
11 * COPYING in the main directory of this source tree, or the
12 * OpenIB.org BSD license below:
13 *
14 * Redistribution and use in source and binary forms, with or
15 * without modification, are permitted provided that the following
16 * conditions are met:
17 *
18 * - Redistributions of source code must retain the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer.
21 *
22 * - Redistributions in binary form must reproduce the above
23 * copyright notice, this list of conditions and the following
24 * disclaimer in the documentation and/or other materials
25 * provided with the distribution.
26 *
27 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
28 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
29 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
30 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
31 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
32 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
33 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
34 * SOFTWARE.
35 */
36
37 /*
38 * This header file is the base header file for qlogic_ib kernel code
39 * qib_user.h serves a similar purpose for user code.
40 */
41
42 #include <linux/interrupt.h>
43 #include <linux/pci.h>
44 #include <linux/dma-mapping.h>
45 #include <linux/mutex.h>
46 #include <linux/list.h>
47 #include <linux/scatterlist.h>
48 #include <linux/slab.h>
49 #include <linux/io.h>
50 #include <linux/fs.h>
51 #include <linux/completion.h>
52 #include <linux/kref.h>
53 #include <linux/sched.h>
54 #include <linux/kthread.h>
55 #include <linux/xarray.h>
56 #include <rdma/ib_hdrs.h>
57 #include <rdma/rdma_vt.h>
58
59 #include "qib_common.h"
60 #include "qib_verbs.h"
61
62 /* only s/w major version of QLogic_IB we can handle */
63 #define QIB_CHIP_VERS_MAJ 2U
64
65 /* don't care about this except printing */
66 #define QIB_CHIP_VERS_MIN 0U
67
68 /* The Organization Unique Identifier (Mfg code), and its position in GUID */
69 #define QIB_OUI 0x001175
70 #define QIB_OUI_LSB 40
71
72 /*
73 * per driver stats, either not device nor port-specific, or
74 * summed over all of the devices and ports.
75 * They are described by name via ipathfs filesystem, so layout
76 * and number of elements can change without breaking compatibility.
77 * If members are added or deleted qib_statnames[] in qib_fs.c must
78 * change to match.
79 */
80 struct qlogic_ib_stats {
81 __u64 sps_ints; /* number of interrupts handled */
82 __u64 sps_errints; /* number of error interrupts */
83 __u64 sps_txerrs; /* tx-related packet errors */
84 __u64 sps_rcverrs; /* non-crc rcv packet errors */
85 __u64 sps_hwerrs; /* hardware errors reported (parity, etc.) */
86 __u64 sps_nopiobufs; /* no pio bufs avail from kernel */
87 __u64 sps_ctxts; /* number of contexts currently open */
88 __u64 sps_lenerrs; /* number of kernel packets where RHF != LRH len */
89 __u64 sps_buffull;
90 __u64 sps_hdrfull;
91 };
92
93 extern struct qlogic_ib_stats qib_stats;
94 extern const struct pci_error_handlers qib_pci_err_handler;
95
96 #define QIB_CHIP_SWVERSION QIB_CHIP_VERS_MAJ
97 /*
98 * First-cut critierion for "device is active" is
99 * two thousand dwords combined Tx, Rx traffic per
100 * 5-second interval. SMA packets are 64 dwords,
101 * and occur "a few per second", presumably each way.
102 */
103 #define QIB_TRAFFIC_ACTIVE_THRESHOLD (2000)
104
105 /*
106 * Below contains all data related to a single context (formerly called port).
107 */
108
109 #ifdef CONFIG_DEBUG_FS
110 struct qib_opcode_stats_perctx;
111 #endif
112
113 struct qib_ctxtdata {
114 void **rcvegrbuf;
115 dma_addr_t *rcvegrbuf_phys;
116 /* rcvhdrq base, needs mmap before useful */
117 void *rcvhdrq;
118 /* kernel virtual address where hdrqtail is updated */
119 void *rcvhdrtail_kvaddr;
120 /*
121 * temp buffer for expected send setup, allocated at open, instead
122 * of each setup call
123 */
124 void *tid_pg_list;
125 /*
126 * Shared page for kernel to signal user processes that send buffers
127 * need disarming. The process should call QIB_CMD_DISARM_BUFS
128 * or QIB_CMD_ACK_EVENT with IPATH_EVENT_DISARM_BUFS set.
129 */
130 unsigned long *user_event_mask;
131 /* when waiting for rcv or pioavail */
132 wait_queue_head_t wait;
133 /*
134 * rcvegr bufs base, physical, must fit
135 * in 44 bits so 32 bit programs mmap64 44 bit works)
136 */
137 dma_addr_t rcvegr_phys;
138 /* mmap of hdrq, must fit in 44 bits */
139 dma_addr_t rcvhdrq_phys;
140 dma_addr_t rcvhdrqtailaddr_phys;
141
142 /*
143 * number of opens (including slave sub-contexts) on this instance
144 * (ignoring forks, dup, etc. for now)
145 */
146 int cnt;
147 /*
148 * how much space to leave at start of eager TID entries for
149 * protocol use, on each TID
150 */
151 /* instead of calculating it */
152 unsigned ctxt;
153 /* local node of context */
154 int node_id;
155 /* non-zero if ctxt is being shared. */
156 u16 subctxt_cnt;
157 /* non-zero if ctxt is being shared. */
158 u16 subctxt_id;
159 /* number of eager TID entries. */
160 u16 rcvegrcnt;
161 /* index of first eager TID entry. */
162 u16 rcvegr_tid_base;
163 /* number of pio bufs for this ctxt (all procs, if shared) */
164 u32 piocnt;
165 /* first pio buffer for this ctxt */
166 u32 pio_base;
167 /* chip offset of PIO buffers for this ctxt */
168 u32 piobufs;
169 /* how many alloc_pages() chunks in rcvegrbuf_pages */
170 u32 rcvegrbuf_chunks;
171 /* how many egrbufs per chunk */
172 u16 rcvegrbufs_perchunk;
173 /* ilog2 of above */
174 u16 rcvegrbufs_perchunk_shift;
175 /* order for rcvegrbuf_pages */
176 size_t rcvegrbuf_size;
177 /* rcvhdrq size (for freeing) */
178 size_t rcvhdrq_size;
179 /* per-context flags for fileops/intr communication */
180 unsigned long flag;
181 /* next expected TID to check when looking for free */
182 u32 tidcursor;
183 /* WAIT_RCV that timed out, no interrupt */
184 u32 rcvwait_to;
185 /* WAIT_PIO that timed out, no interrupt */
186 u32 piowait_to;
187 /* WAIT_RCV already happened, no wait */
188 u32 rcvnowait;
189 /* WAIT_PIO already happened, no wait */
190 u32 pionowait;
191 /* total number of polled urgent packets */
192 u32 urgent;
193 /* saved total number of polled urgent packets for poll edge trigger */
194 u32 urgent_poll;
195 /* pid of process using this ctxt */
196 pid_t pid;
197 pid_t subpid[QLOGIC_IB_MAX_SUBCTXT];
198 /* same size as task_struct .comm[], command that opened context */
199 char comm[16];
200 /* pkeys set by this use of this ctxt */
201 u16 pkeys[4];
202 /* so file ops can get at unit */
203 struct qib_devdata *dd;
204 /* so funcs that need physical port can get it easily */
205 struct qib_pportdata *ppd;
206 /* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */
207 void *subctxt_uregbase;
208 /* An array of pages for the eager receive buffers * N */
209 void *subctxt_rcvegrbuf;
210 /* An array of pages for the eager header queue entries * N */
211 void *subctxt_rcvhdr_base;
212 /* The version of the library which opened this ctxt */
213 u32 userversion;
214 /* Bitmask of active slaves */
215 u32 active_slaves;
216 /* Type of packets or conditions we want to poll for */
217 u16 poll_type;
218 /* receive packet sequence counter */
219 u8 seq_cnt;
220 u8 redirect_seq_cnt;
221 /* ctxt rcvhdrq head offset */
222 u32 head;
223 /* QPs waiting for context processing */
224 struct list_head qp_wait_list;
225 #ifdef CONFIG_DEBUG_FS
226 /* verbs stats per CTX */
227 struct qib_opcode_stats_perctx *opstats;
228 #endif
229 };
230
231 struct rvt_sge_state;
232
233 struct qib_sdma_txreq {
234 int flags;
235 int sg_count;
236 dma_addr_t addr;
237 void (*callback)(struct qib_sdma_txreq *, int);
238 u16 start_idx; /* sdma private */
239 u16 next_descq_idx; /* sdma private */
240 struct list_head list; /* sdma private */
241 };
242
243 struct qib_sdma_desc {
244 __le64 qw[2];
245 };
246
247 struct qib_verbs_txreq {
248 struct qib_sdma_txreq txreq;
249 struct rvt_qp *qp;
250 struct rvt_swqe *wqe;
251 u32 dwords;
252 u16 hdr_dwords;
253 u16 hdr_inx;
254 struct qib_pio_header *align_buf;
255 struct rvt_mregion *mr;
256 struct rvt_sge_state *ss;
257 };
258
259 #define QIB_SDMA_TXREQ_F_USELARGEBUF 0x1
260 #define QIB_SDMA_TXREQ_F_HEADTOHOST 0x2
261 #define QIB_SDMA_TXREQ_F_INTREQ 0x4
262 #define QIB_SDMA_TXREQ_F_FREEBUF 0x8
263 #define QIB_SDMA_TXREQ_F_FREEDESC 0x10
264
265 #define QIB_SDMA_TXREQ_S_OK 0
266 #define QIB_SDMA_TXREQ_S_SENDERROR 1
267 #define QIB_SDMA_TXREQ_S_ABORTED 2
268 #define QIB_SDMA_TXREQ_S_SHUTDOWN 3
269
270 /*
271 * Get/Set IB link-level config parameters for f_get/set_ib_cfg()
272 * Mostly for MADs that set or query link parameters, also ipath
273 * config interfaces
274 */
275 #define QIB_IB_CFG_LIDLMC 0 /* LID (LS16b) and Mask (MS16b) */
276 #define QIB_IB_CFG_LWID_ENB 2 /* allowed Link-width */
277 #define QIB_IB_CFG_LWID 3 /* currently active Link-width */
278 #define QIB_IB_CFG_SPD_ENB 4 /* allowed Link speeds */
279 #define QIB_IB_CFG_SPD 5 /* current Link spd */
280 #define QIB_IB_CFG_RXPOL_ENB 6 /* Auto-RX-polarity enable */
281 #define QIB_IB_CFG_LREV_ENB 7 /* Auto-Lane-reversal enable */
282 #define QIB_IB_CFG_LINKLATENCY 8 /* Link Latency (IB1.2 only) */
283 #define QIB_IB_CFG_HRTBT 9 /* IB heartbeat off/enable/auto; DDR/QDR only */
284 #define QIB_IB_CFG_OP_VLS 10 /* operational VLs */
285 #define QIB_IB_CFG_VL_HIGH_CAP 11 /* num of VL high priority weights */
286 #define QIB_IB_CFG_VL_LOW_CAP 12 /* num of VL low priority weights */
287 #define QIB_IB_CFG_OVERRUN_THRESH 13 /* IB overrun threshold */
288 #define QIB_IB_CFG_PHYERR_THRESH 14 /* IB PHY error threshold */
289 #define QIB_IB_CFG_LINKDEFAULT 15 /* IB link default (sleep/poll) */
290 #define QIB_IB_CFG_PKEYS 16 /* update partition keys */
291 #define QIB_IB_CFG_MTU 17 /* update MTU in IBC */
292 #define QIB_IB_CFG_LSTATE 18 /* update linkcmd and linkinitcmd in IBC */
293 #define QIB_IB_CFG_VL_HIGH_LIMIT 19
294 #define QIB_IB_CFG_PMA_TICKS 20 /* PMA sample tick resolution */
295 #define QIB_IB_CFG_PORT 21 /* switch port we are connected to */
296
297 /*
298 * for CFG_LSTATE: LINKCMD in upper 16 bits, LINKINITCMD in lower 16
299 * IB_LINKINITCMD_POLL and SLEEP are also used as set/get values for
300 * QIB_IB_CFG_LINKDEFAULT cmd
301 */
302 #define IB_LINKCMD_DOWN (0 << 16)
303 #define IB_LINKCMD_ARMED (1 << 16)
304 #define IB_LINKCMD_ACTIVE (2 << 16)
305 #define IB_LINKINITCMD_NOP 0
306 #define IB_LINKINITCMD_POLL 1
307 #define IB_LINKINITCMD_SLEEP 2
308 #define IB_LINKINITCMD_DISABLE 3
309
310 /*
311 * valid states passed to qib_set_linkstate() user call
312 */
313 #define QIB_IB_LINKDOWN 0
314 #define QIB_IB_LINKARM 1
315 #define QIB_IB_LINKACTIVE 2
316 #define QIB_IB_LINKDOWN_ONLY 3
317 #define QIB_IB_LINKDOWN_SLEEP 4
318 #define QIB_IB_LINKDOWN_DISABLE 5
319
320 /*
321 * These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
322 * negotiation) are used for the 3rd argument to path_f_set_ib_cfg
323 * with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
324 * are also the the possible values for qib_link_speed_enabled and active
325 * The values were chosen to match values used within the IB spec.
326 */
327 #define QIB_IB_SDR 1
328 #define QIB_IB_DDR 2
329 #define QIB_IB_QDR 4
330
331 #define QIB_DEFAULT_MTU 4096
332
333 /* max number of IB ports supported per HCA */
334 #define QIB_MAX_IB_PORTS 2
335
336 /*
337 * Possible IB config parameters for f_get/set_ib_table()
338 */
339 #define QIB_IB_TBL_VL_HIGH_ARB 1 /* Get/set VL high priority weights */
340 #define QIB_IB_TBL_VL_LOW_ARB 2 /* Get/set VL low priority weights */
341
342 /*
343 * Possible "operations" for f_rcvctrl(ppd, op, ctxt)
344 * these are bits so they can be combined, e.g.
345 * QIB_RCVCTRL_INTRAVAIL_ENB | QIB_RCVCTRL_CTXT_ENB
346 */
347 #define QIB_RCVCTRL_TAILUPD_ENB 0x01
348 #define QIB_RCVCTRL_TAILUPD_DIS 0x02
349 #define QIB_RCVCTRL_CTXT_ENB 0x04
350 #define QIB_RCVCTRL_CTXT_DIS 0x08
351 #define QIB_RCVCTRL_INTRAVAIL_ENB 0x10
352 #define QIB_RCVCTRL_INTRAVAIL_DIS 0x20
353 #define QIB_RCVCTRL_PKEY_ENB 0x40 /* Note, default is enabled */
354 #define QIB_RCVCTRL_PKEY_DIS 0x80
355 #define QIB_RCVCTRL_BP_ENB 0x0100
356 #define QIB_RCVCTRL_BP_DIS 0x0200
357 #define QIB_RCVCTRL_TIDFLOW_ENB 0x0400
358 #define QIB_RCVCTRL_TIDFLOW_DIS 0x0800
359
360 /*
361 * Possible "operations" for f_sendctrl(ppd, op, var)
362 * these are bits so they can be combined, e.g.
363 * QIB_SENDCTRL_BUFAVAIL_ENB | QIB_SENDCTRL_ENB
364 * Some operations (e.g. DISARM, ABORT) are known to
365 * be "one-shot", so do not modify shadow.
366 */
367 #define QIB_SENDCTRL_DISARM (0x1000)
368 #define QIB_SENDCTRL_DISARM_BUF(bufn) ((bufn) | QIB_SENDCTRL_DISARM)
369 /* available (0x2000) */
370 #define QIB_SENDCTRL_AVAIL_DIS (0x4000)
371 #define QIB_SENDCTRL_AVAIL_ENB (0x8000)
372 #define QIB_SENDCTRL_AVAIL_BLIP (0x10000)
373 #define QIB_SENDCTRL_SEND_DIS (0x20000)
374 #define QIB_SENDCTRL_SEND_ENB (0x40000)
375 #define QIB_SENDCTRL_FLUSH (0x80000)
376 #define QIB_SENDCTRL_CLEAR (0x100000)
377 #define QIB_SENDCTRL_DISARM_ALL (0x200000)
378
379 /*
380 * These are the generic indices for requesting per-port
381 * counter values via the f_portcntr function. They
382 * are always returned as 64 bit values, although most
383 * are 32 bit counters.
384 */
385 /* send-related counters */
386 #define QIBPORTCNTR_PKTSEND 0U
387 #define QIBPORTCNTR_WORDSEND 1U
388 #define QIBPORTCNTR_PSXMITDATA 2U
389 #define QIBPORTCNTR_PSXMITPKTS 3U
390 #define QIBPORTCNTR_PSXMITWAIT 4U
391 #define QIBPORTCNTR_SENDSTALL 5U
392 /* receive-related counters */
393 #define QIBPORTCNTR_PKTRCV 6U
394 #define QIBPORTCNTR_PSRCVDATA 7U
395 #define QIBPORTCNTR_PSRCVPKTS 8U
396 #define QIBPORTCNTR_RCVEBP 9U
397 #define QIBPORTCNTR_RCVOVFL 10U
398 #define QIBPORTCNTR_WORDRCV 11U
399 /* IB link related error counters */
400 #define QIBPORTCNTR_RXLOCALPHYERR 12U
401 #define QIBPORTCNTR_RXVLERR 13U
402 #define QIBPORTCNTR_ERRICRC 14U
403 #define QIBPORTCNTR_ERRVCRC 15U
404 #define QIBPORTCNTR_ERRLPCRC 16U
405 #define QIBPORTCNTR_BADFORMAT 17U
406 #define QIBPORTCNTR_ERR_RLEN 18U
407 #define QIBPORTCNTR_IBSYMBOLERR 19U
408 #define QIBPORTCNTR_INVALIDRLEN 20U
409 #define QIBPORTCNTR_UNSUPVL 21U
410 #define QIBPORTCNTR_EXCESSBUFOVFL 22U
411 #define QIBPORTCNTR_ERRLINK 23U
412 #define QIBPORTCNTR_IBLINKDOWN 24U
413 #define QIBPORTCNTR_IBLINKERRRECOV 25U
414 #define QIBPORTCNTR_LLI 26U
415 /* other error counters */
416 #define QIBPORTCNTR_RXDROPPKT 27U
417 #define QIBPORTCNTR_VL15PKTDROP 28U
418 #define QIBPORTCNTR_ERRPKEY 29U
419 #define QIBPORTCNTR_KHDROVFL 30U
420 /* sampling counters (these are actually control registers) */
421 #define QIBPORTCNTR_PSINTERVAL 31U
422 #define QIBPORTCNTR_PSSTART 32U
423 #define QIBPORTCNTR_PSSTAT 33U
424
425 /* how often we check for packet activity for "power on hours (in seconds) */
426 #define ACTIVITY_TIMER 5
427
428 #define MAX_NAME_SIZE 64
429
430 #ifdef CONFIG_INFINIBAND_QIB_DCA
431 struct qib_irq_notify;
432 #endif
433
434 struct qib_msix_entry {
435 void *arg;
436 #ifdef CONFIG_INFINIBAND_QIB_DCA
437 int dca;
438 int rcv;
439 struct qib_irq_notify *notifier;
440 #endif
441 cpumask_var_t mask;
442 };
443
444 /* Below is an opaque struct. Each chip (device) can maintain
445 * private data needed for its operation, but not germane to the
446 * rest of the driver. For convenience, we define another that
447 * is chip-specific, per-port
448 */
449 struct qib_chip_specific;
450 struct qib_chipport_specific;
451
452 enum qib_sdma_states {
453 qib_sdma_state_s00_hw_down,
454 qib_sdma_state_s10_hw_start_up_wait,
455 qib_sdma_state_s20_idle,
456 qib_sdma_state_s30_sw_clean_up_wait,
457 qib_sdma_state_s40_hw_clean_up_wait,
458 qib_sdma_state_s50_hw_halt_wait,
459 qib_sdma_state_s99_running,
460 };
461
462 enum qib_sdma_events {
463 qib_sdma_event_e00_go_hw_down,
464 qib_sdma_event_e10_go_hw_start,
465 qib_sdma_event_e20_hw_started,
466 qib_sdma_event_e30_go_running,
467 qib_sdma_event_e40_sw_cleaned,
468 qib_sdma_event_e50_hw_cleaned,
469 qib_sdma_event_e60_hw_halted,
470 qib_sdma_event_e70_go_idle,
471 qib_sdma_event_e7220_err_halted,
472 qib_sdma_event_e7322_err_halted,
473 qib_sdma_event_e90_timer_tick,
474 };
475
476 struct sdma_set_state_action {
477 unsigned op_enable:1;
478 unsigned op_intenable:1;
479 unsigned op_halt:1;
480 unsigned op_drain:1;
481 unsigned go_s99_running_tofalse:1;
482 unsigned go_s99_running_totrue:1;
483 };
484
485 struct qib_sdma_state {
486 struct kref kref;
487 struct completion comp;
488 enum qib_sdma_states current_state;
489 struct sdma_set_state_action *set_state_action;
490 unsigned current_op;
491 unsigned go_s99_running;
492 unsigned first_sendbuf;
493 unsigned last_sendbuf; /* really last +1 */
494 /* debugging/devel */
495 enum qib_sdma_states previous_state;
496 unsigned previous_op;
497 enum qib_sdma_events last_event;
498 };
499
500 struct xmit_wait {
501 struct timer_list timer;
502 u64 counter;
503 u8 flags;
504 struct cache {
505 u64 psxmitdata;
506 u64 psrcvdata;
507 u64 psxmitpkts;
508 u64 psrcvpkts;
509 u64 psxmitwait;
510 } counter_cache;
511 };
512
513 /*
514 * The structure below encapsulates data relevant to a physical IB Port.
515 * Current chips support only one such port, but the separation
516 * clarifies things a bit. Note that to conform to IB conventions,
517 * port-numbers are one-based. The first or only port is port1.
518 */
519 struct qib_pportdata {
520 struct qib_ibport ibport_data;
521
522 struct qib_devdata *dd;
523 struct qib_chippport_specific *cpspec; /* chip-specific per-port */
524 struct kobject pport_kobj;
525 struct kobject pport_cc_kobj;
526 struct kobject sl2vl_kobj;
527 struct kobject diagc_kobj;
528
529 /* GUID for this interface, in network order */
530 __be64 guid;
531
532 /* QIB_POLL, etc. link-state specific flags, per port */
533 u32 lflags;
534 /* qib_lflags driver is waiting for */
535 u32 state_wanted;
536 spinlock_t lflags_lock;
537
538 /* ref count for each pkey */
539 atomic_t pkeyrefs[4];
540
541 /*
542 * this address is mapped readonly into user processes so they can
543 * get status cheaply, whenever they want. One qword of status per port
544 */
545 u64 *statusp;
546
547 /* SendDMA related entries */
548
549 /* read mostly */
550 struct qib_sdma_desc *sdma_descq;
551 struct workqueue_struct *qib_wq;
552 struct qib_sdma_state sdma_state;
553 dma_addr_t sdma_descq_phys;
554 volatile __le64 *sdma_head_dma; /* DMA'ed by chip */
555 dma_addr_t sdma_head_phys;
556 u16 sdma_descq_cnt;
557
558 /* read/write using lock */
559 spinlock_t sdma_lock ____cacheline_aligned_in_smp;
560 struct list_head sdma_activelist;
561 struct list_head sdma_userpending;
562 u64 sdma_descq_added;
563 u64 sdma_descq_removed;
564 u16 sdma_descq_tail;
565 u16 sdma_descq_head;
566 u8 sdma_generation;
567 u8 sdma_intrequest;
568
569 struct tasklet_struct sdma_sw_clean_up_task
570 ____cacheline_aligned_in_smp;
571
572 wait_queue_head_t state_wait; /* for state_wanted */
573
574 /* HoL blocking for SMP replies */
575 unsigned hol_state;
576 struct timer_list hol_timer;
577
578 /*
579 * Shadow copies of registers; size indicates read access size.
580 * Most of them are readonly, but some are write-only register,
581 * where we manipulate the bits in the shadow copy, and then write
582 * the shadow copy to qlogic_ib.
583 *
584 * We deliberately make most of these 32 bits, since they have
585 * restricted range. For any that we read, we won't to generate 32
586 * bit accesses, since Opteron will generate 2 separate 32 bit HT
587 * transactions for a 64 bit read, and we want to avoid unnecessary
588 * bus transactions.
589 */
590
591 /* This is the 64 bit group */
592 /* last ibcstatus. opaque outside chip-specific code */
593 u64 lastibcstat;
594
595 /* these are the "32 bit" regs */
596
597 /*
598 * the following two are 32-bit bitmasks, but {test,clear,set}_bit
599 * all expect bit fields to be "unsigned long"
600 */
601 unsigned long p_rcvctrl; /* shadow per-port rcvctrl */
602 unsigned long p_sendctrl; /* shadow per-port sendctrl */
603
604 u32 ibmtu; /* The MTU programmed for this unit */
605 /*
606 * Current max size IB packet (in bytes) including IB headers, that
607 * we can send. Changes when ibmtu changes.
608 */
609 u32 ibmaxlen;
610 /*
611 * ibmaxlen at init time, limited by chip and by receive buffer
612 * size. Not changed after init.
613 */
614 u32 init_ibmaxlen;
615 /* LID programmed for this instance */
616 u16 lid;
617 /* list of pkeys programmed; 0 if not set */
618 u16 pkeys[4];
619 /* LID mask control */
620 u8 lmc;
621 u8 link_width_supported;
622 u16 link_speed_supported;
623 u8 link_width_enabled;
624 u16 link_speed_enabled;
625 u8 link_width_active;
626 u16 link_speed_active;
627 u8 vls_supported;
628 u8 vls_operational;
629 /* Rx Polarity inversion (compensate for ~tx on partner) */
630 u8 rx_pol_inv;
631
632 u8 hw_pidx; /* physical port index */
633 u32 port; /* IB port number and index into dd->pports - 1 */
634
635 u8 delay_mult;
636
637 /* used to override LED behavior */
638 u8 led_override; /* Substituted for normal value, if non-zero */
639 u16 led_override_timeoff; /* delta to next timer event */
640 u8 led_override_vals[2]; /* Alternates per blink-frame */
641 u8 led_override_phase; /* Just counts, LSB picks from vals[] */
642 atomic_t led_override_timer_active;
643 /* Used to flash LEDs in override mode */
644 struct timer_list led_override_timer;
645 struct xmit_wait cong_stats;
646 struct timer_list symerr_clear_timer;
647
648 /* Synchronize access between driver writes and sysfs reads */
649 spinlock_t cc_shadow_lock
650 ____cacheline_aligned_in_smp;
651
652 /* Shadow copy of the congestion control table */
653 struct cc_table_shadow *ccti_entries_shadow;
654
655 /* Shadow copy of the congestion control entries */
656 struct ib_cc_congestion_setting_attr_shadow *congestion_entries_shadow;
657
658 /* List of congestion control table entries */
659 struct ib_cc_table_entry_shadow *ccti_entries;
660
661 /* 16 congestion entries with each entry corresponding to a SL */
662 struct ib_cc_congestion_entry_shadow *congestion_entries;
663
664 /* Maximum number of congestion control entries that the agent expects
665 * the manager to send.
666 */
667 u16 cc_supported_table_entries;
668
669 /* Total number of congestion control table entries */
670 u16 total_cct_entry;
671
672 /* Bit map identifying service level */
673 u16 cc_sl_control_map;
674
675 /* maximum congestion control table index */
676 u16 ccti_limit;
677
678 /* CA's max number of 64 entry units in the congestion control table */
679 u8 cc_max_table_entries;
680 };
681
682 /* Observers. Not to be taken lightly, possibly not to ship. */
683 /*
684 * If a diag read or write is to (bottom <= offset <= top),
685 * the "hoook" is called, allowing, e.g. shadows to be
686 * updated in sync with the driver. struct diag_observer
687 * is the "visible" part.
688 */
689 struct diag_observer;
690
691 typedef int (*diag_hook) (struct qib_devdata *dd,
692 const struct diag_observer *op,
693 u32 offs, u64 *data, u64 mask, int only_32);
694
695 struct diag_observer {
696 diag_hook hook;
697 u32 bottom;
698 u32 top;
699 };
700
701 extern int qib_register_observer(struct qib_devdata *dd,
702 const struct diag_observer *op);
703
704 /* Only declared here, not defined. Private to diags */
705 struct diag_observer_list_elt;
706
707 /* device data struct now contains only "general per-device" info.
708 * fields related to a physical IB port are in a qib_pportdata struct,
709 * described above) while fields only used by a particular chip-type are in
710 * a qib_chipdata struct, whose contents are opaque to this file.
711 */
712 struct qib_devdata {
713 struct qib_ibdev verbs_dev; /* must be first */
714 struct list_head list;
715 /* pointers to related structs for this device */
716 /* pci access data structure */
717 struct pci_dev *pcidev;
718 struct cdev *user_cdev;
719 struct cdev *diag_cdev;
720 struct device *user_device;
721 struct device *diag_device;
722
723 /* mem-mapped pointer to base of chip regs */
724 u64 __iomem *kregbase;
725 /* end of mem-mapped chip space excluding sendbuf and user regs */
726 u64 __iomem *kregend;
727 /* physical address of chip for io_remap, etc. */
728 resource_size_t physaddr;
729 /* qib_cfgctxts pointers */
730 struct qib_ctxtdata **rcd; /* Receive Context Data */
731
732 /* qib_pportdata, points to array of (physical) port-specific
733 * data structs, indexed by pidx (0..n-1)
734 */
735 struct qib_pportdata *pport;
736 struct qib_chip_specific *cspec; /* chip-specific */
737
738 /* kvirt address of 1st 2k pio buffer */
739 void __iomem *pio2kbase;
740 /* kvirt address of 1st 4k pio buffer */
741 void __iomem *pio4kbase;
742 /* mem-mapped pointer to base of PIO buffers (if using WC PAT) */
743 void __iomem *piobase;
744 /* mem-mapped pointer to base of user chip regs (if using WC PAT) */
745 u64 __iomem *userbase;
746 void __iomem *piovl15base; /* base of VL15 buffers, if not WC */
747 /*
748 * points to area where PIOavail registers will be DMA'ed.
749 * Has to be on a page of it's own, because the page will be
750 * mapped into user program space. This copy is *ONLY* ever
751 * written by DMA, not by the driver! Need a copy per device
752 * when we get to multiple devices
753 */
754 volatile __le64 *pioavailregs_dma; /* DMA'ed by chip */
755 /* physical address where updates occur */
756 dma_addr_t pioavailregs_phys;
757
758 /* device-specific implementations of functions needed by
759 * common code. Contrary to previous consensus, we can't
760 * really just point to a device-specific table, because we
761 * may need to "bend", e.g. *_f_put_tid
762 */
763 /* fallback to alternate interrupt type if possible */
764 int (*f_intr_fallback)(struct qib_devdata *);
765 /* hard reset chip */
766 int (*f_reset)(struct qib_devdata *);
767 void (*f_quiet_serdes)(struct qib_pportdata *);
768 int (*f_bringup_serdes)(struct qib_pportdata *);
769 int (*f_early_init)(struct qib_devdata *);
770 void (*f_clear_tids)(struct qib_devdata *, struct qib_ctxtdata *);
771 void (*f_put_tid)(struct qib_devdata *, u64 __iomem*,
772 u32, unsigned long);
773 void (*f_cleanup)(struct qib_devdata *);
774 void (*f_setextled)(struct qib_pportdata *, u32);
775 /* fill out chip-specific fields */
776 int (*f_get_base_info)(struct qib_ctxtdata *, struct qib_base_info *);
777 /* free irq */
778 void (*f_free_irq)(struct qib_devdata *);
779 struct qib_message_header *(*f_get_msgheader)
780 (struct qib_devdata *, __le32 *);
781 void (*f_config_ctxts)(struct qib_devdata *);
782 int (*f_get_ib_cfg)(struct qib_pportdata *, int);
783 int (*f_set_ib_cfg)(struct qib_pportdata *, int, u32);
784 int (*f_set_ib_loopback)(struct qib_pportdata *, const char *);
785 int (*f_get_ib_table)(struct qib_pportdata *, int, void *);
786 int (*f_set_ib_table)(struct qib_pportdata *, int, void *);
787 u32 (*f_iblink_state)(u64);
788 u8 (*f_ibphys_portstate)(u64);
789 void (*f_xgxs_reset)(struct qib_pportdata *);
790 /* per chip actions needed for IB Link up/down changes */
791 int (*f_ib_updown)(struct qib_pportdata *, int, u64);
792 u32 __iomem *(*f_getsendbuf)(struct qib_pportdata *, u64, u32 *);
793 /* Read/modify/write of GPIO pins (potentially chip-specific */
794 int (*f_gpio_mod)(struct qib_devdata *dd, u32 out, u32 dir,
795 u32 mask);
796 /* Enable writes to config EEPROM (if supported) */
797 int (*f_eeprom_wen)(struct qib_devdata *dd, int wen);
798 /*
799 * modify rcvctrl shadow[s] and write to appropriate chip-regs.
800 * see above QIB_RCVCTRL_xxx_ENB/DIS for operations.
801 * (ctxt == -1) means "all contexts", only meaningful for
802 * clearing. Could remove if chip_spec shutdown properly done.
803 */
804 void (*f_rcvctrl)(struct qib_pportdata *, unsigned int op,
805 int ctxt);
806 /* Read/modify/write sendctrl appropriately for op and port. */
807 void (*f_sendctrl)(struct qib_pportdata *, u32 op);
808 void (*f_set_intr_state)(struct qib_devdata *, u32);
809 void (*f_set_armlaunch)(struct qib_devdata *, u32);
810 void (*f_wantpiobuf_intr)(struct qib_devdata *, u32);
811 int (*f_late_initreg)(struct qib_devdata *);
812 int (*f_init_sdma_regs)(struct qib_pportdata *);
813 u16 (*f_sdma_gethead)(struct qib_pportdata *);
814 int (*f_sdma_busy)(struct qib_pportdata *);
815 void (*f_sdma_update_tail)(struct qib_pportdata *, u16);
816 void (*f_sdma_set_desc_cnt)(struct qib_pportdata *, unsigned);
817 void (*f_sdma_sendctrl)(struct qib_pportdata *, unsigned);
818 void (*f_sdma_hw_clean_up)(struct qib_pportdata *);
819 void (*f_sdma_hw_start_up)(struct qib_pportdata *);
820 void (*f_sdma_init_early)(struct qib_pportdata *);
821 void (*f_set_cntr_sample)(struct qib_pportdata *, u32, u32);
822 void (*f_update_usrhead)(struct qib_ctxtdata *, u64, u32, u32, u32);
823 u32 (*f_hdrqempty)(struct qib_ctxtdata *);
824 u64 (*f_portcntr)(struct qib_pportdata *, u32);
825 u32 (*f_read_cntrs)(struct qib_devdata *, loff_t, char **,
826 u64 **);
827 u32 (*f_read_portcntrs)(struct qib_devdata *, loff_t, u32,
828 char **, u64 **);
829 u32 (*f_setpbc_control)(struct qib_pportdata *, u32, u8, u8);
830 void (*f_initvl15_bufs)(struct qib_devdata *);
831 void (*f_init_ctxt)(struct qib_ctxtdata *);
832 void (*f_txchk_change)(struct qib_devdata *, u32, u32, u32,
833 struct qib_ctxtdata *);
834 void (*f_writescratch)(struct qib_devdata *, u32);
835 int (*f_tempsense_rd)(struct qib_devdata *, int regnum);
836 #ifdef CONFIG_INFINIBAND_QIB_DCA
837 int (*f_notify_dca)(struct qib_devdata *, unsigned long event);
838 #endif
839
840 char *boardname; /* human readable board info */
841
842 /* template for writing TIDs */
843 u64 tidtemplate;
844 /* value to write to free TIDs */
845 u64 tidinvalid;
846
847 /* number of registers used for pioavail */
848 u32 pioavregs;
849 /* device (not port) flags, basically device capabilities */
850 u32 flags;
851 /* last buffer for user use */
852 u32 lastctxt_piobuf;
853
854 /* reset value */
855 u64 z_int_counter;
856 /* percpu intcounter */
857 u64 __percpu *int_counter;
858
859 /* pio bufs allocated per ctxt */
860 u32 pbufsctxt;
861 /* if remainder on bufs/ctxt, ctxts < extrabuf get 1 extra */
862 u32 ctxts_extrabuf;
863 /*
864 * number of ctxts configured as max; zero is set to number chip
865 * supports, less gives more pio bufs/ctxt, etc.
866 */
867 u32 cfgctxts;
868 /*
869 * number of ctxts available for PSM open
870 */
871 u32 freectxts;
872
873 /*
874 * hint that we should update pioavailshadow before
875 * looking for a PIO buffer
876 */
877 u32 upd_pio_shadow;
878
879 /* internal debugging stats */
880 u32 maxpkts_call;
881 u32 avgpkts_call;
882 u64 nopiobufs;
883
884 /* PCI Vendor ID (here for NodeInfo) */
885 u16 vendorid;
886 /* PCI Device ID (here for NodeInfo) */
887 u16 deviceid;
888 /* for write combining settings */
889 int wc_cookie;
890 unsigned long wc_base;
891 unsigned long wc_len;
892
893 /* shadow copy of struct page *'s for exp tid pages */
894 struct page **pageshadow;
895 /* shadow copy of dma handles for exp tid pages */
896 dma_addr_t *physshadow;
897 u64 __iomem *egrtidbase;
898 spinlock_t sendctrl_lock; /* protect changes to sendctrl shadow */
899 /* around rcd and (user ctxts) ctxt_cnt use (intr vs free) */
900 spinlock_t uctxt_lock; /* rcd and user context changes */
901 /*
902 * per unit status, see also portdata statusp
903 * mapped readonly into user processes so they can get unit and
904 * IB link status cheaply
905 */
906 u64 *devstatusp;
907 char *freezemsg; /* freeze msg if hw error put chip in freeze */
908 u32 freezelen; /* max length of freezemsg */
909 /* timer used to prevent stats overflow, error throttling, etc. */
910 struct timer_list stats_timer;
911
912 /* timer to verify interrupts work, and fallback if possible */
913 struct timer_list intrchk_timer;
914 unsigned long ureg_align; /* user register alignment */
915
916 /*
917 * Protects pioavailshadow, pioavailkernel, pio_need_disarm, and
918 * pio_writing.
919 */
920 spinlock_t pioavail_lock;
921 /*
922 * index of last buffer to optimize search for next
923 */
924 u32 last_pio;
925 /*
926 * min kernel pio buffer to optimize search
927 */
928 u32 min_kernel_pio;
929 /*
930 * Shadow copies of registers; size indicates read access size.
931 * Most of them are readonly, but some are write-only register,
932 * where we manipulate the bits in the shadow copy, and then write
933 * the shadow copy to qlogic_ib.
934 *
935 * We deliberately make most of these 32 bits, since they have
936 * restricted range. For any that we read, we won't to generate 32
937 * bit accesses, since Opteron will generate 2 separate 32 bit HT
938 * transactions for a 64 bit read, and we want to avoid unnecessary
939 * bus transactions.
940 */
941
942 /* This is the 64 bit group */
943
944 unsigned long pioavailshadow[6];
945 /* bitmap of send buffers available for the kernel to use with PIO. */
946 unsigned long pioavailkernel[6];
947 /* bitmap of send buffers which need to be disarmed. */
948 unsigned long pio_need_disarm[3];
949 /* bitmap of send buffers which are being written to. */
950 unsigned long pio_writing[3];
951 /* kr_revision shadow */
952 u64 revision;
953 /* Base GUID for device (from eeprom, network order) */
954 __be64 base_guid;
955
956 /*
957 * kr_sendpiobufbase value (chip offset of pio buffers), and the
958 * base of the 2KB buffer s(user processes only use 2K)
959 */
960 u64 piobufbase;
961 u32 pio2k_bufbase;
962
963 /* these are the "32 bit" regs */
964
965 /* number of GUIDs in the flash for this interface */
966 u32 nguid;
967 /*
968 * the following two are 32-bit bitmasks, but {test,clear,set}_bit
969 * all expect bit fields to be "unsigned long"
970 */
971 unsigned long rcvctrl; /* shadow per device rcvctrl */
972 unsigned long sendctrl; /* shadow per device sendctrl */
973
974 /* value we put in kr_rcvhdrcnt */
975 u32 rcvhdrcnt;
976 /* value we put in kr_rcvhdrsize */
977 u32 rcvhdrsize;
978 /* value we put in kr_rcvhdrentsize */
979 u32 rcvhdrentsize;
980 /* kr_ctxtcnt value */
981 u32 ctxtcnt;
982 /* kr_pagealign value */
983 u32 palign;
984 /* number of "2KB" PIO buffers */
985 u32 piobcnt2k;
986 /* size in bytes of "2KB" PIO buffers */
987 u32 piosize2k;
988 /* max usable size in dwords of a "2KB" PIO buffer before going "4KB" */
989 u32 piosize2kmax_dwords;
990 /* number of "4KB" PIO buffers */
991 u32 piobcnt4k;
992 /* size in bytes of "4KB" PIO buffers */
993 u32 piosize4k;
994 /* kr_rcvegrbase value */
995 u32 rcvegrbase;
996 /* kr_rcvtidbase value */
997 u32 rcvtidbase;
998 /* kr_rcvtidcnt value */
999 u32 rcvtidcnt;
1000 /* kr_userregbase */
1001 u32 uregbase;
1002 /* shadow the control register contents */
1003 u32 control;
1004
1005 /* chip address space used by 4k pio buffers */
1006 u32 align4k;
1007 /* size of each rcvegrbuffer */
1008 u16 rcvegrbufsize;
1009 /* log2 of above */
1010 u16 rcvegrbufsize_shift;
1011 /* localbus width (1, 2,4,8,16,32) from config space */
1012 u32 lbus_width;
1013 /* localbus speed in MHz */
1014 u32 lbus_speed;
1015 int unit; /* unit # of this chip */
1016
1017 /* start of CHIP_SPEC move to chipspec, but need code changes */
1018 /* low and high portions of MSI capability/vector */
1019 u32 msi_lo;
1020 /* saved after PCIe init for restore after reset */
1021 u32 msi_hi;
1022 /* MSI data (vector) saved for restore */
1023 u16 msi_data;
1024 /* so we can rewrite it after a chip reset */
1025 u32 pcibar0;
1026 /* so we can rewrite it after a chip reset */
1027 u32 pcibar1;
1028 u64 rhdrhead_intr_off;
1029
1030 /*
1031 * ASCII serial number, from flash, large enough for original
1032 * all digit strings, and longer QLogic serial number format
1033 */
1034 u8 serial[16];
1035 /* human readable board version */
1036 u8 boardversion[96];
1037 u8 lbus_info[32]; /* human readable localbus info */
1038 /* chip major rev, from qib_revision */
1039 u8 majrev;
1040 /* chip minor rev, from qib_revision */
1041 u8 minrev;
1042
1043 /* Misc small ints */
1044 /* Number of physical ports available */
1045 u8 num_pports;
1046 /* Lowest context number which can be used by user processes */
1047 u8 first_user_ctxt;
1048 u8 n_krcv_queues;
1049 u8 qpn_mask;
1050 u8 skip_kctxt_mask;
1051
1052 u16 rhf_offset; /* offset of RHF within receive header entry */
1053
1054 /*
1055 * GPIO pins for twsi-connected devices, and device code for eeprom
1056 */
1057 u8 gpio_sda_num;
1058 u8 gpio_scl_num;
1059 u8 twsi_eeprom_dev;
1060 u8 board_atten;
1061
1062 /* Support (including locks) for EEPROM logging of errors and time */
1063 /* control access to actual counters, timer */
1064 spinlock_t eep_st_lock;
1065 /* control high-level access to EEPROM */
1066 struct mutex eep_lock;
1067 uint64_t traffic_wds;
1068 struct qib_diag_client *diag_client;
1069 spinlock_t qib_diag_trans_lock; /* protect diag observer ops */
1070 struct diag_observer_list_elt *diag_observer_list;
1071
1072 u8 psxmitwait_supported;
1073 /* cycle length of PS* counters in HW (in picoseconds) */
1074 u16 psxmitwait_check_rate;
1075 /* high volume overflow errors defered to tasklet */
1076 struct tasklet_struct error_tasklet;
1077
1078 int assigned_node_id; /* NUMA node closest to HCA */
1079 };
1080
1081 /* hol_state values */
1082 #define QIB_HOL_UP 0
1083 #define QIB_HOL_INIT 1
1084
1085 #define QIB_SDMA_SENDCTRL_OP_ENABLE (1U << 0)
1086 #define QIB_SDMA_SENDCTRL_OP_INTENABLE (1U << 1)
1087 #define QIB_SDMA_SENDCTRL_OP_HALT (1U << 2)
1088 #define QIB_SDMA_SENDCTRL_OP_CLEANUP (1U << 3)
1089 #define QIB_SDMA_SENDCTRL_OP_DRAIN (1U << 4)
1090
1091 /* operation types for f_txchk_change() */
1092 #define TXCHK_CHG_TYPE_DIS1 3
1093 #define TXCHK_CHG_TYPE_ENAB1 2
1094 #define TXCHK_CHG_TYPE_KERN 1
1095 #define TXCHK_CHG_TYPE_USER 0
1096
1097 #define QIB_CHASE_TIME msecs_to_jiffies(145)
1098 #define QIB_CHASE_DIS_TIME msecs_to_jiffies(160)
1099
1100 /* Private data for file operations */
1101 struct qib_filedata {
1102 struct qib_ctxtdata *rcd;
1103 unsigned subctxt;
1104 unsigned tidcursor;
1105 struct qib_user_sdma_queue *pq;
1106 int rec_cpu_num; /* for cpu affinity; -1 if none */
1107 };
1108
1109 extern struct xarray qib_dev_table;
1110 extern struct qib_devdata *qib_lookup(int unit);
1111 extern u32 qib_cpulist_count;
1112 extern unsigned long *qib_cpulist;
1113 extern unsigned qib_cc_table_size;
1114
1115 int qib_init(struct qib_devdata *, int);
1116 int init_chip_wc_pat(struct qib_devdata *dd, u32);
1117 int qib_enable_wc(struct qib_devdata *dd);
1118 void qib_disable_wc(struct qib_devdata *dd);
1119 int qib_count_units(int *npresentp, int *nupp);
1120 int qib_count_active_units(void);
1121
1122 int qib_cdev_init(int minor, const char *name,
1123 const struct file_operations *fops,
1124 struct cdev **cdevp, struct device **devp);
1125 void qib_cdev_cleanup(struct cdev **cdevp, struct device **devp);
1126 int qib_dev_init(void);
1127 void qib_dev_cleanup(void);
1128
1129 int qib_diag_add(struct qib_devdata *);
1130 void qib_diag_remove(struct qib_devdata *);
1131 void qib_handle_e_ibstatuschanged(struct qib_pportdata *, u64);
1132 void qib_sdma_update_tail(struct qib_pportdata *, u16); /* hold sdma_lock */
1133
1134 int qib_decode_err(struct qib_devdata *dd, char *buf, size_t blen, u64 err);
1135 void qib_bad_intrstatus(struct qib_devdata *);
1136 void qib_handle_urcv(struct qib_devdata *, u64);
1137
1138 /* clean up any per-chip chip-specific stuff */
1139 void qib_chip_cleanup(struct qib_devdata *);
1140 /* clean up any chip type-specific stuff */
1141 void qib_chip_done(void);
1142
1143 /* check to see if we have to force ordering for write combining */
1144 int qib_unordered_wc(void);
1145 void qib_pio_copy(void __iomem *to, const void *from, size_t count);
1146
1147 void qib_disarm_piobufs(struct qib_devdata *, unsigned, unsigned);
1148 int qib_disarm_piobufs_ifneeded(struct qib_ctxtdata *);
1149 void qib_disarm_piobufs_set(struct qib_devdata *, unsigned long *, unsigned);
1150 void qib_cancel_sends(struct qib_pportdata *);
1151
1152 int qib_create_rcvhdrq(struct qib_devdata *, struct qib_ctxtdata *);
1153 int qib_setup_eagerbufs(struct qib_ctxtdata *);
1154 void qib_set_ctxtcnt(struct qib_devdata *);
1155 int qib_create_ctxts(struct qib_devdata *dd);
1156 struct qib_ctxtdata *qib_create_ctxtdata(struct qib_pportdata *, u32, int);
1157 int qib_init_pportdata(struct qib_pportdata *, struct qib_devdata *, u8, u8);
1158 void qib_free_ctxtdata(struct qib_devdata *, struct qib_ctxtdata *);
1159
1160 u32 qib_kreceive(struct qib_ctxtdata *, u32 *, u32 *);
1161 int qib_reset_device(int);
1162 int qib_wait_linkstate(struct qib_pportdata *, u32, int);
1163 int qib_set_linkstate(struct qib_pportdata *, u8);
1164 int qib_set_mtu(struct qib_pportdata *, u16);
1165 int qib_set_lid(struct qib_pportdata *, u32, u8);
1166 void qib_hol_down(struct qib_pportdata *);
1167 void qib_hol_init(struct qib_pportdata *);
1168 void qib_hol_up(struct qib_pportdata *);
1169 void qib_hol_event(struct timer_list *);
1170 void qib_disable_after_error(struct qib_devdata *);
1171 int qib_set_uevent_bits(struct qib_pportdata *, const int);
1172
1173 /* for use in system calls, where we want to know device type, etc. */
1174 #define ctxt_fp(fp) \
1175 (((struct qib_filedata *)(fp)->private_data)->rcd)
1176 #define subctxt_fp(fp) \
1177 (((struct qib_filedata *)(fp)->private_data)->subctxt)
1178 #define tidcursor_fp(fp) \
1179 (((struct qib_filedata *)(fp)->private_data)->tidcursor)
1180 #define user_sdma_queue_fp(fp) \
1181 (((struct qib_filedata *)(fp)->private_data)->pq)
1182
dd_from_ppd(struct qib_pportdata * ppd)1183 static inline struct qib_devdata *dd_from_ppd(struct qib_pportdata *ppd)
1184 {
1185 return ppd->dd;
1186 }
1187
dd_from_dev(struct qib_ibdev * dev)1188 static inline struct qib_devdata *dd_from_dev(struct qib_ibdev *dev)
1189 {
1190 return container_of(dev, struct qib_devdata, verbs_dev);
1191 }
1192
dd_from_ibdev(struct ib_device * ibdev)1193 static inline struct qib_devdata *dd_from_ibdev(struct ib_device *ibdev)
1194 {
1195 return dd_from_dev(to_idev(ibdev));
1196 }
1197
ppd_from_ibp(struct qib_ibport * ibp)1198 static inline struct qib_pportdata *ppd_from_ibp(struct qib_ibport *ibp)
1199 {
1200 return container_of(ibp, struct qib_pportdata, ibport_data);
1201 }
1202
to_iport(struct ib_device * ibdev,u32 port)1203 static inline struct qib_ibport *to_iport(struct ib_device *ibdev, u32 port)
1204 {
1205 struct qib_devdata *dd = dd_from_ibdev(ibdev);
1206 u32 pidx = port - 1; /* IB number port from 1, hdw from 0 */
1207
1208 WARN_ON(pidx >= dd->num_pports);
1209 return &dd->pport[pidx].ibport_data;
1210 }
1211
1212 /*
1213 * values for dd->flags (_device_ related flags) and
1214 */
1215 #define QIB_HAS_LINK_LATENCY 0x1 /* supports link latency (IB 1.2) */
1216 #define QIB_INITTED 0x2 /* chip and driver up and initted */
1217 #define QIB_DOING_RESET 0x4 /* in the middle of doing chip reset */
1218 #define QIB_PRESENT 0x8 /* chip accesses can be done */
1219 #define QIB_PIO_FLUSH_WC 0x10 /* Needs Write combining flush for PIO */
1220 #define QIB_HAS_THRESH_UPDATE 0x40
1221 #define QIB_HAS_SDMA_TIMEOUT 0x80
1222 #define QIB_USE_SPCL_TRIG 0x100 /* SpecialTrigger launch enabled */
1223 #define QIB_NODMA_RTAIL 0x200 /* rcvhdrtail register DMA enabled */
1224 #define QIB_HAS_INTX 0x800 /* Supports INTx interrupts */
1225 #define QIB_HAS_SEND_DMA 0x1000 /* Supports Send DMA */
1226 #define QIB_HAS_VLSUPP 0x2000 /* Supports multiple VLs; PBC different */
1227 #define QIB_HAS_HDRSUPP 0x4000 /* Supports header suppression */
1228 #define QIB_BADINTR 0x8000 /* severe interrupt problems */
1229 #define QIB_DCA_ENABLED 0x10000 /* Direct Cache Access enabled */
1230 #define QIB_HAS_QSFP 0x20000 /* device (card instance) has QSFP */
1231 #define QIB_SHUTDOWN 0x40000 /* device is shutting down */
1232
1233 /*
1234 * values for ppd->lflags (_ib_port_ related flags)
1235 */
1236 #define QIBL_LINKV 0x1 /* IB link state valid */
1237 #define QIBL_LINKDOWN 0x8 /* IB link is down */
1238 #define QIBL_LINKINIT 0x10 /* IB link level is up */
1239 #define QIBL_LINKARMED 0x20 /* IB link is ARMED */
1240 #define QIBL_LINKACTIVE 0x40 /* IB link is ACTIVE */
1241 /* leave a gap for more IB-link state */
1242 #define QIBL_IB_AUTONEG_INPROG 0x1000 /* non-IBTA DDR/QDR neg active */
1243 #define QIBL_IB_AUTONEG_FAILED 0x2000 /* non-IBTA DDR/QDR neg failed */
1244 #define QIBL_IB_LINK_DISABLED 0x4000 /* Linkdown-disable forced,
1245 * Do not try to bring up */
1246 #define QIBL_IB_FORCE_NOTIFY 0x8000 /* force notify on next ib change */
1247
1248 /* IB dword length mask in PBC (lower 11 bits); same for all chips */
1249 #define QIB_PBC_LENGTH_MASK ((1 << 11) - 1)
1250
1251
1252 /* ctxt_flag bit offsets */
1253 /* waiting for a packet to arrive */
1254 #define QIB_CTXT_WAITING_RCV 2
1255 /* master has not finished initializing */
1256 #define QIB_CTXT_MASTER_UNINIT 4
1257 /* waiting for an urgent packet to arrive */
1258 #define QIB_CTXT_WAITING_URG 5
1259
1260 /* free up any allocated data at closes */
1261 void qib_free_data(struct qib_ctxtdata *dd);
1262 void qib_chg_pioavailkernel(struct qib_devdata *, unsigned, unsigned,
1263 u32, struct qib_ctxtdata *);
1264 struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *,
1265 const struct pci_device_id *);
1266 struct qib_devdata *qib_init_iba7220_funcs(struct pci_dev *,
1267 const struct pci_device_id *);
1268 struct qib_devdata *qib_init_iba6120_funcs(struct pci_dev *,
1269 const struct pci_device_id *);
1270 void qib_free_devdata(struct qib_devdata *);
1271 struct qib_devdata *qib_alloc_devdata(struct pci_dev *pdev, size_t extra);
1272
1273 #define QIB_TWSI_NO_DEV 0xFF
1274 /* Below qib_twsi_ functions must be called with eep_lock held */
1275 int qib_twsi_reset(struct qib_devdata *dd);
1276 int qib_twsi_blk_rd(struct qib_devdata *dd, int dev, int addr, void *buffer,
1277 int len);
1278 int qib_twsi_blk_wr(struct qib_devdata *dd, int dev, int addr,
1279 const void *buffer, int len);
1280 void qib_get_eeprom_info(struct qib_devdata *);
1281 void qib_dump_lookup_output_queue(struct qib_devdata *);
1282 void qib_force_pio_avail_update(struct qib_devdata *);
1283 void qib_clear_symerror_on_linkup(struct timer_list *t);
1284
1285 /*
1286 * Set LED override, only the two LSBs have "public" meaning, but
1287 * any non-zero value substitutes them for the Link and LinkTrain
1288 * LED states.
1289 */
1290 #define QIB_LED_PHYS 1 /* Physical (linktraining) GREEN LED */
1291 #define QIB_LED_LOG 2 /* Logical (link) YELLOW LED */
1292 void qib_set_led_override(struct qib_pportdata *ppd, unsigned int val);
1293
1294 /* send dma routines */
1295 int qib_setup_sdma(struct qib_pportdata *);
1296 void qib_teardown_sdma(struct qib_pportdata *);
1297 void __qib_sdma_intr(struct qib_pportdata *);
1298 void qib_sdma_intr(struct qib_pportdata *);
1299 void qib_user_sdma_send_desc(struct qib_pportdata *dd,
1300 struct list_head *pktlist);
1301 int qib_sdma_verbs_send(struct qib_pportdata *, struct rvt_sge_state *,
1302 u32, struct qib_verbs_txreq *);
1303 /* ppd->sdma_lock should be locked before calling this. */
1304 int qib_sdma_make_progress(struct qib_pportdata *dd);
1305
1306 /* must be called under qib_sdma_lock */
qib_sdma_descq_freecnt(const struct qib_pportdata * ppd)1307 static inline u16 qib_sdma_descq_freecnt(const struct qib_pportdata *ppd)
1308 {
1309 return ppd->sdma_descq_cnt -
1310 (ppd->sdma_descq_added - ppd->sdma_descq_removed) - 1;
1311 }
1312
__qib_sdma_running(struct qib_pportdata * ppd)1313 static inline int __qib_sdma_running(struct qib_pportdata *ppd)
1314 {
1315 return ppd->sdma_state.current_state == qib_sdma_state_s99_running;
1316 }
1317 int qib_sdma_running(struct qib_pportdata *);
1318 void dump_sdma_state(struct qib_pportdata *ppd);
1319 void __qib_sdma_process_event(struct qib_pportdata *, enum qib_sdma_events);
1320 void qib_sdma_process_event(struct qib_pportdata *, enum qib_sdma_events);
1321
1322 /*
1323 * number of words used for protocol header if not set by qib_userinit();
1324 */
1325 #define QIB_DFLT_RCVHDRSIZE 9
1326
1327 /*
1328 * We need to be able to handle an IB header of at least 24 dwords.
1329 * We need the rcvhdrq large enough to handle largest IB header, but
1330 * still have room for a 2KB MTU standard IB packet.
1331 * Additionally, some processor/memory controller combinations
1332 * benefit quite strongly from having the DMA'ed data be cacheline
1333 * aligned and a cacheline multiple, so we set the size to 32 dwords
1334 * (2 64-byte primary cachelines for pretty much all processors of
1335 * interest). The alignment hurts nothing, other than using somewhat
1336 * more memory.
1337 */
1338 #define QIB_RCVHDR_ENTSIZE 32
1339
1340 int qib_get_user_pages(unsigned long, size_t, struct page **);
1341 void qib_release_user_pages(struct page **, size_t);
1342 int qib_eeprom_read(struct qib_devdata *, u8, void *, int);
1343 int qib_eeprom_write(struct qib_devdata *, u8, const void *, int);
1344 u32 __iomem *qib_getsendbuf_range(struct qib_devdata *, u32 *, u32, u32);
1345 void qib_sendbuf_done(struct qib_devdata *, unsigned);
1346
qib_clear_rcvhdrtail(const struct qib_ctxtdata * rcd)1347 static inline void qib_clear_rcvhdrtail(const struct qib_ctxtdata *rcd)
1348 {
1349 *((u64 *) rcd->rcvhdrtail_kvaddr) = 0ULL;
1350 }
1351
qib_get_rcvhdrtail(const struct qib_ctxtdata * rcd)1352 static inline u32 qib_get_rcvhdrtail(const struct qib_ctxtdata *rcd)
1353 {
1354 /*
1355 * volatile because it's a DMA target from the chip, routine is
1356 * inlined, and don't want register caching or reordering.
1357 */
1358 return (u32) le64_to_cpu(
1359 *((volatile __le64 *)rcd->rcvhdrtail_kvaddr)); /* DMA'ed */
1360 }
1361
1362 /*
1363 * sysfs interface.
1364 */
1365
1366 extern const char ib_qib_version[];
1367 extern const struct attribute_group qib_attr_group;
1368
1369 int qib_device_create(struct qib_devdata *);
1370 void qib_device_remove(struct qib_devdata *);
1371
1372 int qib_create_port_files(struct ib_device *ibdev, u32 port_num,
1373 struct kobject *kobj);
1374 void qib_verbs_unregister_sysfs(struct qib_devdata *);
1375 /* Hook for sysfs read of QSFP */
1376 extern int qib_qsfp_dump(struct qib_pportdata *ppd, char *buf, int len);
1377
1378 int __init qib_init_qibfs(void);
1379 int __exit qib_exit_qibfs(void);
1380
1381 int qibfs_add(struct qib_devdata *);
1382 int qibfs_remove(struct qib_devdata *);
1383
1384 int qib_pcie_init(struct pci_dev *, const struct pci_device_id *);
1385 int qib_pcie_ddinit(struct qib_devdata *, struct pci_dev *,
1386 const struct pci_device_id *);
1387 void qib_pcie_ddcleanup(struct qib_devdata *);
1388 int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent);
1389 void qib_free_irq(struct qib_devdata *dd);
1390 int qib_reinit_intr(struct qib_devdata *dd);
1391 void qib_pcie_getcmd(struct qib_devdata *, u16 *, u8 *, u8 *);
1392 void qib_pcie_reenable(struct qib_devdata *, u16, u8, u8);
1393 /* interrupts for device */
1394 u64 qib_int_counter(struct qib_devdata *);
1395 /* interrupt for all devices */
1396 u64 qib_sps_ints(void);
1397
1398 /*
1399 * dma_addr wrappers - all 0's invalid for hw
1400 */
1401 int qib_map_page(struct pci_dev *d, struct page *p, dma_addr_t *daddr);
1402 struct pci_dev *qib_get_pci_dev(struct rvt_dev_info *rdi);
1403
1404 /*
1405 * Flush write combining store buffers (if present) and perform a write
1406 * barrier.
1407 */
qib_flush_wc(void)1408 static inline void qib_flush_wc(void)
1409 {
1410 #if defined(CONFIG_X86_64)
1411 asm volatile("sfence" : : : "memory");
1412 #else
1413 wmb(); /* no reorder around wc flush */
1414 #endif
1415 }
1416
1417 /* global module parameter variables */
1418 extern unsigned qib_ibmtu;
1419 extern ushort qib_cfgctxts;
1420 extern ushort qib_num_cfg_vls;
1421 extern ushort qib_mini_init; /* If set, do few (ideally 0) writes to chip */
1422 extern unsigned qib_n_krcv_queues;
1423 extern unsigned qib_sdma_fetch_arb;
1424 extern unsigned qib_compat_ddr_negotiate;
1425 extern int qib_special_trigger;
1426 extern unsigned qib_numa_aware;
1427
1428 extern struct mutex qib_mutex;
1429
1430 /* Number of seconds before our card status check... */
1431 #define STATUS_TIMEOUT 60
1432
1433 #define QIB_DRV_NAME "ib_qib"
1434 #define QIB_USER_MINOR_BASE 0
1435 #define QIB_TRACE_MINOR 127
1436 #define QIB_DIAGPKT_MINOR 128
1437 #define QIB_DIAG_MINOR_BASE 129
1438 #define QIB_NMINORS 255
1439
1440 #define PCI_VENDOR_ID_PATHSCALE 0x1fc1
1441 #define PCI_VENDOR_ID_QLOGIC 0x1077
1442 #define PCI_DEVICE_ID_QLOGIC_IB_6120 0x10
1443 #define PCI_DEVICE_ID_QLOGIC_IB_7220 0x7220
1444 #define PCI_DEVICE_ID_QLOGIC_IB_7322 0x7322
1445
1446 /*
1447 * qib_early_err is used (only!) to print early errors before devdata is
1448 * allocated, or when dd->pcidev may not be valid, and at the tail end of
1449 * cleanup when devdata may have been freed, etc. qib_dev_porterr is
1450 * the same as qib_dev_err, but is used when the message really needs
1451 * the IB port# to be definitive as to what's happening..
1452 * All of these go to the trace log, and the trace log entry is done
1453 * first to avoid possible serial port delays from printk.
1454 */
1455 #define qib_early_err(dev, fmt, ...) \
1456 dev_err(dev, fmt, ##__VA_ARGS__)
1457
1458 #define qib_dev_err(dd, fmt, ...) \
1459 dev_err(&(dd)->pcidev->dev, "%s: " fmt, \
1460 rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), ##__VA_ARGS__)
1461
1462 #define qib_dev_warn(dd, fmt, ...) \
1463 dev_warn(&(dd)->pcidev->dev, "%s: " fmt, \
1464 rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), ##__VA_ARGS__)
1465
1466 #define qib_dev_porterr(dd, port, fmt, ...) \
1467 dev_err(&(dd)->pcidev->dev, "%s: IB%u:%u " fmt, \
1468 rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), (dd)->unit, (port), \
1469 ##__VA_ARGS__)
1470
1471 #define qib_devinfo(pcidev, fmt, ...) \
1472 dev_info(&(pcidev)->dev, fmt, ##__VA_ARGS__)
1473
1474 /*
1475 * this is used for formatting hw error messages...
1476 */
1477 struct qib_hwerror_msgs {
1478 u64 mask;
1479 const char *msg;
1480 size_t sz;
1481 };
1482
1483 #define QLOGIC_IB_HWE_MSG(a, b) { .mask = a, .msg = b }
1484
1485 /* in qib_intr.c... */
1486 void qib_format_hwerrors(u64 hwerrs,
1487 const struct qib_hwerror_msgs *hwerrmsgs,
1488 size_t nhwerrmsgs, char *msg, size_t lmsg);
1489
1490 void qib_stop_send_queue(struct rvt_qp *qp);
1491 void qib_quiesce_qp(struct rvt_qp *qp);
1492 void qib_flush_qp_waiters(struct rvt_qp *qp);
1493 int qib_mtu_to_path_mtu(u32 mtu);
1494 u32 qib_mtu_from_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp, u32 pmtu);
1495 void qib_notify_error_qp(struct rvt_qp *qp);
1496 int qib_get_pmtu_from_attr(struct rvt_dev_info *rdi, struct rvt_qp *qp,
1497 struct ib_qp_attr *attr);
1498
1499 #endif /* _QIB_KERNEL_H */
1500