1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 	Mantis PCI bridge driver
4 
5 	Copyright (C) Manu Abraham (abraham.manu@gmail.com)
6 
7 */
8 
9 #include <linux/kernel.h>
10 #include <linux/spinlock.h>
11 #include <asm/io.h>
12 
13 #include <linux/signal.h>
14 #include <linux/sched.h>
15 #include <linux/interrupt.h>
16 #include <linux/pci.h>
17 
18 #include <media/dmxdev.h>
19 #include <media/dvbdev.h>
20 #include <media/dvb_demux.h>
21 #include <media/dvb_frontend.h>
22 #include <media/dvb_net.h>
23 
24 #include "mantis_common.h"
25 #include "mantis_reg.h"
26 #include "mantis_uart.h"
27 #include "mantis_input.h"
28 
29 struct mantis_uart_params {
30 	enum mantis_baud	baud_rate;
31 	enum mantis_parity	parity;
32 };
33 
34 static struct {
35 	char string[7];
36 } rates[5] = {
37 	{ "9600" },
38 	{ "19200" },
39 	{ "38400" },
40 	{ "57600" },
41 	{ "115200" }
42 };
43 
44 static struct {
45 	char string[5];
46 } parity[3] = {
47 	{ "NONE" },
48 	{ "ODD" },
49 	{ "EVEN" }
50 };
51 
mantis_uart_read(struct mantis_pci * mantis)52 static void mantis_uart_read(struct mantis_pci *mantis)
53 {
54 	struct mantis_hwconfig *config = mantis->hwconfig;
55 	int i, scancode = 0, err = 0;
56 
57 	/* get data */
58 	dprintk(MANTIS_DEBUG, 1, "UART Reading ...");
59 	for (i = 0; i < (config->bytes + 1); i++) {
60 		int data = mmread(MANTIS_UART_RXD);
61 
62 		dprintk(MANTIS_DEBUG, 0, " <%02x>", data);
63 
64 		scancode = (scancode << 8) | (data & 0x3f);
65 		err |= data;
66 
67 		if (data & (1 << 7))
68 			dprintk(MANTIS_ERROR, 1, "UART framing error");
69 
70 		if (data & (1 << 6))
71 			dprintk(MANTIS_ERROR, 1, "UART parity error");
72 	}
73 	dprintk(MANTIS_DEBUG, 0, "\n");
74 
75 	if ((err & 0xC0) == 0)
76 		mantis_input_process(mantis, scancode);
77 }
78 
mantis_uart_work(struct work_struct * work)79 static void mantis_uart_work(struct work_struct *work)
80 {
81 	struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work);
82 	u32 stat;
83 	unsigned long timeout;
84 
85 	stat = mmread(MANTIS_UART_STAT);
86 
87 	if (stat & MANTIS_UART_RXFIFO_FULL)
88 		dprintk(MANTIS_ERROR, 1, "RX Fifo FULL");
89 
90 	/*
91 	 * MANTIS_UART_RXFIFO_DATA is only set if at least
92 	 * config->bytes + 1 bytes are in the FIFO.
93 	 */
94 
95 	/* FIXME: is 10ms good enough ? */
96 	timeout = jiffies +  msecs_to_jiffies(10);
97 	while (stat & MANTIS_UART_RXFIFO_DATA) {
98 		mantis_uart_read(mantis);
99 		stat = mmread(MANTIS_UART_STAT);
100 
101 		if (!time_is_after_jiffies(timeout))
102 			break;
103 	}
104 
105 	/* re-enable UART (RX) interrupt */
106 	mantis_unmask_ints(mantis, MANTIS_INT_IRQ1);
107 }
108 
mantis_uart_setup(struct mantis_pci * mantis,struct mantis_uart_params * params)109 static int mantis_uart_setup(struct mantis_pci *mantis,
110 			     struct mantis_uart_params *params)
111 {
112 	u32 reg;
113 
114 	mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL);
115 
116 	reg = mmread(MANTIS_UART_BAUD);
117 
118 	switch (params->baud_rate) {
119 	case MANTIS_BAUD_9600:
120 		reg |= 0xd8;
121 		break;
122 	case MANTIS_BAUD_19200:
123 		reg |= 0x6c;
124 		break;
125 	case MANTIS_BAUD_38400:
126 		reg |= 0x36;
127 		break;
128 	case MANTIS_BAUD_57600:
129 		reg |= 0x23;
130 		break;
131 	case MANTIS_BAUD_115200:
132 		reg |= 0x11;
133 		break;
134 	default:
135 		return -EINVAL;
136 	}
137 
138 	mmwrite(reg, MANTIS_UART_BAUD);
139 
140 	return 0;
141 }
142 
mantis_uart_init(struct mantis_pci * mantis)143 int mantis_uart_init(struct mantis_pci *mantis)
144 {
145 	struct mantis_hwconfig *config = mantis->hwconfig;
146 	struct mantis_uart_params params;
147 
148 	/* default parity: */
149 	params.baud_rate = config->baud_rate;
150 	params.parity = config->parity;
151 	dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s",
152 		rates[params.baud_rate].string,
153 		parity[params.parity].string);
154 
155 	INIT_WORK(&mantis->uart_work, mantis_uart_work);
156 
157 	/* disable interrupt */
158 	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
159 
160 	mantis_uart_setup(mantis, &params);
161 
162 	/* default 1 byte */
163 	mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD);
164 
165 	/* flush buffer */
166 	mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL);
167 
168 	/* enable interrupt */
169 	mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
170 	mantis_unmask_ints(mantis, MANTIS_INT_IRQ1);
171 
172 	schedule_work(&mantis->uart_work);
173 	dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
174 
175 	return 0;
176 }
177 EXPORT_SYMBOL_GPL(mantis_uart_init);
178 
mantis_uart_exit(struct mantis_pci * mantis)179 void mantis_uart_exit(struct mantis_pci *mantis)
180 {
181 	/* disable interrupt */
182 	mantis_mask_ints(mantis, MANTIS_INT_IRQ1);
183 	mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL);
184 	flush_work(&mantis->uart_work);
185 }
186 EXPORT_SYMBOL_GPL(mantis_uart_exit);
187