1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Compaq Hot Plug Controller Driver
4 *
5 * Copyright (C) 1995,2001 Compaq Computer Corporation
6 * Copyright (C) 2001 Greg Kroah-Hartman <greg@kroah.com>
7 * Copyright (C) 2001 IBM Corp.
8 *
9 * All rights reserved.
10 *
11 * Send feedback to <greg@kroah.com>
12 *
13 * Jan 12, 2003 - Added 66/100/133MHz PCI-X support,
14 * Torben Mathiasen <torben.mathiasen@hp.com>
15 */
16
17 #include <linux/module.h>
18 #include <linux/moduleparam.h>
19 #include <linux/kernel.h>
20 #include <linux/types.h>
21 #include <linux/proc_fs.h>
22 #include <linux/slab.h>
23 #include <linux/workqueue.h>
24 #include <linux/pci.h>
25 #include <linux/pci_hotplug.h>
26 #include <linux/init.h>
27 #include <linux/interrupt.h>
28
29 #include <linux/uaccess.h>
30
31 #include "cpqphp.h"
32 #include "cpqphp_nvram.h"
33
34
35 /* Global variables */
36 int cpqhp_debug;
37 int cpqhp_legacy_mode;
38 struct controller *cpqhp_ctrl_list; /* = NULL */
39 struct pci_func *cpqhp_slot_list[256];
40 struct irq_routing_table *cpqhp_routing_table;
41
42 /* local variables */
43 static void __iomem *smbios_table;
44 static void __iomem *smbios_start;
45 static void __iomem *cpqhp_rom_start;
46 static bool power_mode;
47 static bool debug;
48 static int initialized;
49
50 #define DRIVER_VERSION "0.9.8"
51 #define DRIVER_AUTHOR "Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>"
52 #define DRIVER_DESC "Compaq Hot Plug PCI Controller Driver"
53
54 MODULE_AUTHOR(DRIVER_AUTHOR);
55 MODULE_DESCRIPTION(DRIVER_DESC);
56 MODULE_LICENSE("GPL");
57
58 module_param(power_mode, bool, 0644);
59 MODULE_PARM_DESC(power_mode, "Power mode enabled or not");
60
61 module_param(debug, bool, 0644);
62 MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
63
64 #define CPQHPC_MODULE_MINOR 208
65
is_slot64bit(struct slot * slot)66 static inline int is_slot64bit(struct slot *slot)
67 {
68 return (readb(slot->p_sm_slot + SMBIOS_SLOT_WIDTH) == 0x06) ? 1 : 0;
69 }
70
is_slot66mhz(struct slot * slot)71 static inline int is_slot66mhz(struct slot *slot)
72 {
73 return (readb(slot->p_sm_slot + SMBIOS_SLOT_TYPE) == 0x0E) ? 1 : 0;
74 }
75
76 /**
77 * detect_SMBIOS_pointer - find the System Management BIOS Table in mem region.
78 * @begin: begin pointer for region to be scanned.
79 * @end: end pointer for region to be scanned.
80 *
81 * Returns pointer to the head of the SMBIOS tables (or %NULL).
82 */
detect_SMBIOS_pointer(void __iomem * begin,void __iomem * end)83 static void __iomem *detect_SMBIOS_pointer(void __iomem *begin, void __iomem *end)
84 {
85 void __iomem *fp;
86 void __iomem *endp;
87 u8 temp1, temp2, temp3, temp4;
88 int status = 0;
89
90 endp = (end - sizeof(u32) + 1);
91
92 for (fp = begin; fp <= endp; fp += 16) {
93 temp1 = readb(fp);
94 temp2 = readb(fp+1);
95 temp3 = readb(fp+2);
96 temp4 = readb(fp+3);
97 if (temp1 == '_' &&
98 temp2 == 'S' &&
99 temp3 == 'M' &&
100 temp4 == '_') {
101 status = 1;
102 break;
103 }
104 }
105
106 if (!status)
107 fp = NULL;
108
109 dbg("Discovered SMBIOS Entry point at %p\n", fp);
110
111 return fp;
112 }
113
114 /**
115 * init_SERR - Initializes the per slot SERR generation.
116 * @ctrl: controller to use
117 *
118 * For unexpected switch opens
119 */
init_SERR(struct controller * ctrl)120 static int init_SERR(struct controller *ctrl)
121 {
122 u32 tempdword;
123 u32 number_of_slots;
124
125 if (!ctrl)
126 return 1;
127
128 tempdword = ctrl->first_slot;
129
130 number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
131 /* Loop through slots */
132 while (number_of_slots) {
133 writeb(0, ctrl->hpc_reg + SLOT_SERR);
134 tempdword++;
135 number_of_slots--;
136 }
137
138 return 0;
139 }
140
init_cpqhp_routing_table(void)141 static int init_cpqhp_routing_table(void)
142 {
143 int len;
144
145 cpqhp_routing_table = pcibios_get_irq_routing_table();
146 if (cpqhp_routing_table == NULL)
147 return -ENOMEM;
148
149 len = cpqhp_routing_table_length();
150 if (len == 0) {
151 kfree(cpqhp_routing_table);
152 cpqhp_routing_table = NULL;
153 return -1;
154 }
155
156 return 0;
157 }
158
159 /* nice debugging output */
pci_print_IRQ_route(void)160 static void pci_print_IRQ_route(void)
161 {
162 int len;
163 int loop;
164 u8 tbus, tdevice, tslot;
165
166 len = cpqhp_routing_table_length();
167
168 dbg("bus dev func slot\n");
169 for (loop = 0; loop < len; ++loop) {
170 tbus = cpqhp_routing_table->slots[loop].bus;
171 tdevice = cpqhp_routing_table->slots[loop].devfn;
172 tslot = cpqhp_routing_table->slots[loop].slot;
173 dbg("%d %d %d %d\n", tbus, tdevice >> 3, tdevice & 0x7, tslot);
174
175 }
176 }
177
178
179 /**
180 * get_subsequent_smbios_entry: get the next entry from bios table.
181 * @smbios_start: where to start in the SMBIOS table
182 * @smbios_table: location of the SMBIOS table
183 * @curr: %NULL or pointer to previously returned structure
184 *
185 * Gets the first entry if previous == NULL;
186 * otherwise, returns the next entry.
187 * Uses global SMBIOS Table pointer.
188 *
189 * Returns a pointer to an SMBIOS structure or NULL if none found.
190 */
get_subsequent_smbios_entry(void __iomem * smbios_start,void __iomem * smbios_table,void __iomem * curr)191 static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start,
192 void __iomem *smbios_table,
193 void __iomem *curr)
194 {
195 u8 bail = 0;
196 u8 previous_byte = 1;
197 void __iomem *p_temp;
198 void __iomem *p_max;
199
200 if (!smbios_table || !curr)
201 return NULL;
202
203 /* set p_max to the end of the table */
204 p_max = smbios_start + readw(smbios_table + ST_LENGTH);
205
206 p_temp = curr;
207 p_temp += readb(curr + SMBIOS_GENERIC_LENGTH);
208
209 while ((p_temp < p_max) && !bail) {
210 /* Look for the double NULL terminator
211 * The first condition is the previous byte
212 * and the second is the curr
213 */
214 if (!previous_byte && !(readb(p_temp)))
215 bail = 1;
216
217 previous_byte = readb(p_temp);
218 p_temp++;
219 }
220
221 if (p_temp < p_max)
222 return p_temp;
223 else
224 return NULL;
225 }
226
227
228 /**
229 * get_SMBIOS_entry - return the requested SMBIOS entry or %NULL
230 * @smbios_start: where to start in the SMBIOS table
231 * @smbios_table: location of the SMBIOS table
232 * @type: SMBIOS structure type to be returned
233 * @previous: %NULL or pointer to previously returned structure
234 *
235 * Gets the first entry of the specified type if previous == %NULL;
236 * Otherwise, returns the next entry of the given type.
237 * Uses global SMBIOS Table pointer.
238 * Uses get_subsequent_smbios_entry.
239 *
240 * Returns a pointer to an SMBIOS structure or %NULL if none found.
241 */
get_SMBIOS_entry(void __iomem * smbios_start,void __iomem * smbios_table,u8 type,void __iomem * previous)242 static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start,
243 void __iomem *smbios_table,
244 u8 type,
245 void __iomem *previous)
246 {
247 if (!smbios_table)
248 return NULL;
249
250 if (!previous)
251 previous = smbios_start;
252 else
253 previous = get_subsequent_smbios_entry(smbios_start,
254 smbios_table, previous);
255
256 while (previous)
257 if (readb(previous + SMBIOS_GENERIC_TYPE) != type)
258 previous = get_subsequent_smbios_entry(smbios_start,
259 smbios_table, previous);
260 else
261 break;
262
263 return previous;
264 }
265
ctrl_slot_cleanup(struct controller * ctrl)266 static int ctrl_slot_cleanup(struct controller *ctrl)
267 {
268 struct slot *old_slot, *next_slot;
269
270 old_slot = ctrl->slot;
271 ctrl->slot = NULL;
272
273 while (old_slot) {
274 next_slot = old_slot->next;
275 pci_hp_deregister(&old_slot->hotplug_slot);
276 kfree(old_slot);
277 old_slot = next_slot;
278 }
279
280 cpqhp_remove_debugfs_files(ctrl);
281
282 /* Free IRQ associated with hot plug device */
283 free_irq(ctrl->interrupt, ctrl);
284 /* Unmap the memory */
285 iounmap(ctrl->hpc_reg);
286 /* Finally reclaim PCI mem */
287 release_mem_region(pci_resource_start(ctrl->pci_dev, 0),
288 pci_resource_len(ctrl->pci_dev, 0));
289
290 return 0;
291 }
292
293
294 /**
295 * get_slot_mapping - determine logical slot mapping for PCI device
296 *
297 * Won't work for more than one PCI-PCI bridge in a slot.
298 *
299 * @bus_num - bus number of PCI device
300 * @dev_num - device number of PCI device
301 * @slot - Pointer to u8 where slot number will be returned
302 *
303 * Output: SUCCESS or FAILURE
304 */
305 static int
get_slot_mapping(struct pci_bus * bus,u8 bus_num,u8 dev_num,u8 * slot)306 get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
307 {
308 u32 work;
309 long len;
310 long loop;
311
312 u8 tbus, tdevice, tslot, bridgeSlot;
313
314 dbg("%s: %p, %d, %d, %p\n", __func__, bus, bus_num, dev_num, slot);
315
316 bridgeSlot = 0xFF;
317
318 len = cpqhp_routing_table_length();
319 for (loop = 0; loop < len; ++loop) {
320 tbus = cpqhp_routing_table->slots[loop].bus;
321 tdevice = cpqhp_routing_table->slots[loop].devfn >> 3;
322 tslot = cpqhp_routing_table->slots[loop].slot;
323
324 if ((tbus == bus_num) && (tdevice == dev_num)) {
325 *slot = tslot;
326 return 0;
327 } else {
328 /* Did not get a match on the target PCI device. Check
329 * if the current IRQ table entry is a PCI-to-PCI
330 * bridge device. If so, and it's secondary bus
331 * matches the bus number for the target device, I need
332 * to save the bridge's slot number. If I can not find
333 * an entry for the target device, I will have to
334 * assume it's on the other side of the bridge, and
335 * assign it the bridge's slot.
336 */
337 bus->number = tbus;
338 pci_bus_read_config_dword(bus, PCI_DEVFN(tdevice, 0),
339 PCI_CLASS_REVISION, &work);
340
341 if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
342 pci_bus_read_config_dword(bus,
343 PCI_DEVFN(tdevice, 0),
344 PCI_PRIMARY_BUS, &work);
345 // See if bridge's secondary bus matches target bus.
346 if (((work >> 8) & 0x000000FF) == (long) bus_num)
347 bridgeSlot = tslot;
348 }
349 }
350
351 }
352
353 /* If we got here, we didn't find an entry in the IRQ mapping table for
354 * the target PCI device. If we did determine that the target device
355 * is on the other side of a PCI-to-PCI bridge, return the slot number
356 * for the bridge.
357 */
358 if (bridgeSlot != 0xFF) {
359 *slot = bridgeSlot;
360 return 0;
361 }
362 /* Couldn't find an entry in the routing table for this PCI device */
363 return -1;
364 }
365
366
367 /**
368 * cpqhp_set_attention_status - Turns the Amber LED for a slot on or off
369 * @ctrl: struct controller to use
370 * @func: PCI device/function info
371 * @status: LED control flag: 1 = LED on, 0 = LED off
372 */
373 static int
cpqhp_set_attention_status(struct controller * ctrl,struct pci_func * func,u32 status)374 cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func,
375 u32 status)
376 {
377 u8 hp_slot;
378
379 if (func == NULL)
380 return 1;
381
382 hp_slot = func->device - ctrl->slot_device_offset;
383
384 /* Wait for exclusive access to hardware */
385 mutex_lock(&ctrl->crit_sect);
386
387 if (status == 1)
388 amber_LED_on(ctrl, hp_slot);
389 else if (status == 0)
390 amber_LED_off(ctrl, hp_slot);
391 else {
392 /* Done with exclusive hardware access */
393 mutex_unlock(&ctrl->crit_sect);
394 return 1;
395 }
396
397 set_SOGO(ctrl);
398
399 /* Wait for SOBS to be unset */
400 wait_for_ctrl_irq(ctrl);
401
402 /* Done with exclusive hardware access */
403 mutex_unlock(&ctrl->crit_sect);
404
405 return 0;
406 }
407
408
409 /**
410 * set_attention_status - Turns the Amber LED for a slot on or off
411 * @hotplug_slot: slot to change LED on
412 * @status: LED control flag
413 */
set_attention_status(struct hotplug_slot * hotplug_slot,u8 status)414 static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
415 {
416 struct pci_func *slot_func;
417 struct slot *slot = to_slot(hotplug_slot);
418 struct controller *ctrl = slot->ctrl;
419 u8 bus;
420 u8 devfn;
421 u8 device;
422 u8 function;
423
424 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
425
426 if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
427 return -ENODEV;
428
429 device = devfn >> 3;
430 function = devfn & 0x7;
431 dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function);
432
433 slot_func = cpqhp_slot_find(bus, device, function);
434 if (!slot_func)
435 return -ENODEV;
436
437 return cpqhp_set_attention_status(ctrl, slot_func, status);
438 }
439
440
process_SI(struct hotplug_slot * hotplug_slot)441 static int process_SI(struct hotplug_slot *hotplug_slot)
442 {
443 struct pci_func *slot_func;
444 struct slot *slot = to_slot(hotplug_slot);
445 struct controller *ctrl = slot->ctrl;
446 u8 bus;
447 u8 devfn;
448 u8 device;
449 u8 function;
450
451 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
452
453 if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
454 return -ENODEV;
455
456 device = devfn >> 3;
457 function = devfn & 0x7;
458 dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function);
459
460 slot_func = cpqhp_slot_find(bus, device, function);
461 if (!slot_func)
462 return -ENODEV;
463
464 slot_func->bus = bus;
465 slot_func->device = device;
466 slot_func->function = function;
467 slot_func->configured = 0;
468 dbg("board_added(%p, %p)\n", slot_func, ctrl);
469 return cpqhp_process_SI(ctrl, slot_func);
470 }
471
472
process_SS(struct hotplug_slot * hotplug_slot)473 static int process_SS(struct hotplug_slot *hotplug_slot)
474 {
475 struct pci_func *slot_func;
476 struct slot *slot = to_slot(hotplug_slot);
477 struct controller *ctrl = slot->ctrl;
478 u8 bus;
479 u8 devfn;
480 u8 device;
481 u8 function;
482
483 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
484
485 if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
486 return -ENODEV;
487
488 device = devfn >> 3;
489 function = devfn & 0x7;
490 dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function);
491
492 slot_func = cpqhp_slot_find(bus, device, function);
493 if (!slot_func)
494 return -ENODEV;
495
496 dbg("In %s, slot_func = %p, ctrl = %p\n", __func__, slot_func, ctrl);
497 return cpqhp_process_SS(ctrl, slot_func);
498 }
499
500
hardware_test(struct hotplug_slot * hotplug_slot,u32 value)501 static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value)
502 {
503 struct slot *slot = to_slot(hotplug_slot);
504 struct controller *ctrl = slot->ctrl;
505
506 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
507
508 return cpqhp_hardware_test(ctrl, value);
509 }
510
511
get_power_status(struct hotplug_slot * hotplug_slot,u8 * value)512 static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
513 {
514 struct slot *slot = to_slot(hotplug_slot);
515 struct controller *ctrl = slot->ctrl;
516
517 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
518
519 *value = get_slot_enabled(ctrl, slot);
520 return 0;
521 }
522
get_attention_status(struct hotplug_slot * hotplug_slot,u8 * value)523 static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
524 {
525 struct slot *slot = to_slot(hotplug_slot);
526 struct controller *ctrl = slot->ctrl;
527
528 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
529
530 *value = cpq_get_attention_status(ctrl, slot);
531 return 0;
532 }
533
get_latch_status(struct hotplug_slot * hotplug_slot,u8 * value)534 static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value)
535 {
536 struct slot *slot = to_slot(hotplug_slot);
537 struct controller *ctrl = slot->ctrl;
538
539 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
540
541 *value = cpq_get_latch_status(ctrl, slot);
542
543 return 0;
544 }
545
get_adapter_status(struct hotplug_slot * hotplug_slot,u8 * value)546 static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
547 {
548 struct slot *slot = to_slot(hotplug_slot);
549 struct controller *ctrl = slot->ctrl;
550
551 dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
552
553 *value = get_presence_status(ctrl, slot);
554
555 return 0;
556 }
557
558 static const struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
559 .set_attention_status = set_attention_status,
560 .enable_slot = process_SI,
561 .disable_slot = process_SS,
562 .hardware_test = hardware_test,
563 .get_power_status = get_power_status,
564 .get_attention_status = get_attention_status,
565 .get_latch_status = get_latch_status,
566 .get_adapter_status = get_adapter_status,
567 };
568
569 #define SLOT_NAME_SIZE 10
570
ctrl_slot_setup(struct controller * ctrl,void __iomem * smbios_start,void __iomem * smbios_table)571 static int ctrl_slot_setup(struct controller *ctrl,
572 void __iomem *smbios_start,
573 void __iomem *smbios_table)
574 {
575 struct slot *slot;
576 struct pci_bus *bus = ctrl->pci_bus;
577 u8 number_of_slots;
578 u8 slot_device;
579 u8 slot_number;
580 u8 ctrl_slot;
581 u32 tempdword;
582 char name[SLOT_NAME_SIZE];
583 void __iomem *slot_entry = NULL;
584 int result;
585
586 dbg("%s\n", __func__);
587
588 tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
589
590 number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
591 slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
592 slot_number = ctrl->first_slot;
593
594 while (number_of_slots) {
595 slot = kzalloc(sizeof(*slot), GFP_KERNEL);
596 if (!slot) {
597 result = -ENOMEM;
598 goto error;
599 }
600
601 slot->ctrl = ctrl;
602 slot->bus = ctrl->bus;
603 slot->device = slot_device;
604 slot->number = slot_number;
605 dbg("slot->number = %u\n", slot->number);
606
607 slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9,
608 slot_entry);
609
610 while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) !=
611 slot->number)) {
612 slot_entry = get_SMBIOS_entry(smbios_start,
613 smbios_table, 9, slot_entry);
614 }
615
616 slot->p_sm_slot = slot_entry;
617
618 timer_setup(&slot->task_event, cpqhp_pushbutton_thread, 0);
619 slot->task_event.expires = jiffies + 5 * HZ;
620
621 /*FIXME: these capabilities aren't used but if they are
622 * they need to be correctly implemented
623 */
624 slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
625 slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
626
627 if (is_slot64bit(slot))
628 slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
629 if (is_slot66mhz(slot))
630 slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
631 if (bus->cur_bus_speed == PCI_SPEED_66MHz)
632 slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
633
634 ctrl_slot =
635 slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
636
637 /* Check presence */
638 slot->capabilities |=
639 ((((~tempdword) >> 23) |
640 ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
641 /* Check the switch state */
642 slot->capabilities |=
643 ((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
644 /* Check the slot enable */
645 slot->capabilities |=
646 ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
647
648 /* register this slot with the hotplug pci core */
649 snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
650 slot->hotplug_slot.ops = &cpqphp_hotplug_slot_ops;
651
652 dbg("registering bus %d, dev %d, number %d, ctrl->slot_device_offset %d, slot %d\n",
653 slot->bus, slot->device,
654 slot->number, ctrl->slot_device_offset,
655 slot_number);
656 result = pci_hp_register(&slot->hotplug_slot,
657 ctrl->pci_dev->bus,
658 slot->device,
659 name);
660 if (result) {
661 err("pci_hp_register failed with error %d\n", result);
662 goto error_slot;
663 }
664
665 slot->next = ctrl->slot;
666 ctrl->slot = slot;
667
668 number_of_slots--;
669 slot_device++;
670 slot_number++;
671 }
672
673 return 0;
674 error_slot:
675 kfree(slot);
676 error:
677 return result;
678 }
679
one_time_init(void)680 static int one_time_init(void)
681 {
682 int loop;
683 int retval = 0;
684
685 if (initialized)
686 return 0;
687
688 power_mode = 0;
689
690 retval = init_cpqhp_routing_table();
691 if (retval)
692 goto error;
693
694 if (cpqhp_debug)
695 pci_print_IRQ_route();
696
697 dbg("Initialize + Start the notification mechanism\n");
698
699 retval = cpqhp_event_start_thread();
700 if (retval)
701 goto error;
702
703 dbg("Initialize slot lists\n");
704 for (loop = 0; loop < 256; loop++)
705 cpqhp_slot_list[loop] = NULL;
706
707 /* FIXME: We also need to hook the NMI handler eventually.
708 * this also needs to be worked with Christoph
709 * register_NMI_handler();
710 */
711 /* Map rom address */
712 cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
713 if (!cpqhp_rom_start) {
714 err("Could not ioremap memory region for ROM\n");
715 retval = -EIO;
716 goto error;
717 }
718
719 /* Now, map the int15 entry point if we are on compaq specific
720 * hardware
721 */
722 compaq_nvram_init(cpqhp_rom_start);
723
724 /* Map smbios table entry point structure */
725 smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start,
726 cpqhp_rom_start + ROM_PHY_LEN);
727 if (!smbios_table) {
728 err("Could not find the SMBIOS pointer in memory\n");
729 retval = -EIO;
730 goto error_rom_start;
731 }
732
733 smbios_start = ioremap(readl(smbios_table + ST_ADDRESS),
734 readw(smbios_table + ST_LENGTH));
735 if (!smbios_start) {
736 err("Could not ioremap memory region taken from SMBIOS values\n");
737 retval = -EIO;
738 goto error_smbios_start;
739 }
740
741 initialized = 1;
742
743 return retval;
744
745 error_smbios_start:
746 iounmap(smbios_start);
747 error_rom_start:
748 iounmap(cpqhp_rom_start);
749 error:
750 return retval;
751 }
752
cpqhpc_probe(struct pci_dev * pdev,const struct pci_device_id * ent)753 static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
754 {
755 u8 num_of_slots = 0;
756 u8 hp_slot = 0;
757 u8 device;
758 u8 bus_cap;
759 u16 temp_word;
760 u16 vendor_id;
761 u16 subsystem_vid;
762 u16 subsystem_deviceid;
763 u32 rc;
764 struct controller *ctrl;
765 struct pci_func *func;
766 struct pci_bus *bus;
767 int err;
768
769 err = pci_enable_device(pdev);
770 if (err) {
771 printk(KERN_ERR MY_NAME ": cannot enable PCI device %s (%d)\n",
772 pci_name(pdev), err);
773 return err;
774 }
775
776 bus = pdev->subordinate;
777 if (!bus) {
778 pci_notice(pdev, "the device is not a bridge, skipping\n");
779 rc = -ENODEV;
780 goto err_disable_device;
781 }
782
783 /* Need to read VID early b/c it's used to differentiate CPQ and INTC
784 * discovery
785 */
786 vendor_id = pdev->vendor;
787 if ((vendor_id != PCI_VENDOR_ID_COMPAQ) &&
788 (vendor_id != PCI_VENDOR_ID_INTEL)) {
789 err(msg_HPC_non_compaq_or_intel);
790 rc = -ENODEV;
791 goto err_disable_device;
792 }
793 dbg("Vendor ID: %x\n", vendor_id);
794
795 dbg("revision: %d\n", pdev->revision);
796 if ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!pdev->revision)) {
797 err(msg_HPC_rev_error);
798 rc = -ENODEV;
799 goto err_disable_device;
800 }
801
802 /* Check for the proper subsystem IDs
803 * Intel uses a different SSID programming model than Compaq.
804 * For Intel, each SSID bit identifies a PHP capability.
805 * Also Intel HPCs may have RID=0.
806 */
807 if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL)) {
808 err(msg_HPC_not_supported);
809 rc = -ENODEV;
810 goto err_disable_device;
811 }
812
813 /* TODO: This code can be made to support non-Compaq or Intel
814 * subsystem IDs
815 */
816 subsystem_vid = pdev->subsystem_vendor;
817 dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
818 if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) {
819 err(msg_HPC_non_compaq_or_intel);
820 rc = -ENODEV;
821 goto err_disable_device;
822 }
823
824 ctrl = kzalloc(sizeof(struct controller), GFP_KERNEL);
825 if (!ctrl) {
826 rc = -ENOMEM;
827 goto err_disable_device;
828 }
829
830 subsystem_deviceid = pdev->subsystem_device;
831
832 info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid);
833
834 /* Set Vendor ID, so it can be accessed later from other
835 * functions
836 */
837 ctrl->vendor_id = vendor_id;
838
839 switch (subsystem_vid) {
840 case PCI_VENDOR_ID_COMPAQ:
841 if (pdev->revision >= 0x13) { /* CIOBX */
842 ctrl->push_flag = 1;
843 ctrl->slot_switch_type = 1;
844 ctrl->push_button = 1;
845 ctrl->pci_config_space = 1;
846 ctrl->defeature_PHP = 1;
847 ctrl->pcix_support = 1;
848 ctrl->pcix_speed_capability = 1;
849 pci_read_config_byte(pdev, 0x41, &bus_cap);
850 if (bus_cap & 0x80) {
851 dbg("bus max supports 133MHz PCI-X\n");
852 bus->max_bus_speed = PCI_SPEED_133MHz_PCIX;
853 break;
854 }
855 if (bus_cap & 0x40) {
856 dbg("bus max supports 100MHz PCI-X\n");
857 bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
858 break;
859 }
860 if (bus_cap & 0x20) {
861 dbg("bus max supports 66MHz PCI-X\n");
862 bus->max_bus_speed = PCI_SPEED_66MHz_PCIX;
863 break;
864 }
865 if (bus_cap & 0x10) {
866 dbg("bus max supports 66MHz PCI\n");
867 bus->max_bus_speed = PCI_SPEED_66MHz;
868 break;
869 }
870
871 break;
872 }
873
874 switch (subsystem_deviceid) {
875 case PCI_SUB_HPC_ID:
876 /* Original 6500/7000 implementation */
877 ctrl->slot_switch_type = 1;
878 bus->max_bus_speed = PCI_SPEED_33MHz;
879 ctrl->push_button = 0;
880 ctrl->pci_config_space = 1;
881 ctrl->defeature_PHP = 1;
882 ctrl->pcix_support = 0;
883 ctrl->pcix_speed_capability = 0;
884 break;
885 case PCI_SUB_HPC_ID2:
886 /* First Pushbutton implementation */
887 ctrl->push_flag = 1;
888 ctrl->slot_switch_type = 1;
889 bus->max_bus_speed = PCI_SPEED_33MHz;
890 ctrl->push_button = 1;
891 ctrl->pci_config_space = 1;
892 ctrl->defeature_PHP = 1;
893 ctrl->pcix_support = 0;
894 ctrl->pcix_speed_capability = 0;
895 break;
896 case PCI_SUB_HPC_ID_INTC:
897 /* Third party (6500/7000) */
898 ctrl->slot_switch_type = 1;
899 bus->max_bus_speed = PCI_SPEED_33MHz;
900 ctrl->push_button = 0;
901 ctrl->pci_config_space = 1;
902 ctrl->defeature_PHP = 1;
903 ctrl->pcix_support = 0;
904 ctrl->pcix_speed_capability = 0;
905 break;
906 case PCI_SUB_HPC_ID3:
907 /* First 66 Mhz implementation */
908 ctrl->push_flag = 1;
909 ctrl->slot_switch_type = 1;
910 bus->max_bus_speed = PCI_SPEED_66MHz;
911 ctrl->push_button = 1;
912 ctrl->pci_config_space = 1;
913 ctrl->defeature_PHP = 1;
914 ctrl->pcix_support = 0;
915 ctrl->pcix_speed_capability = 0;
916 break;
917 case PCI_SUB_HPC_ID4:
918 /* First PCI-X implementation, 100MHz */
919 ctrl->push_flag = 1;
920 ctrl->slot_switch_type = 1;
921 bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
922 ctrl->push_button = 1;
923 ctrl->pci_config_space = 1;
924 ctrl->defeature_PHP = 1;
925 ctrl->pcix_support = 1;
926 ctrl->pcix_speed_capability = 0;
927 break;
928 default:
929 err(msg_HPC_not_supported);
930 rc = -ENODEV;
931 goto err_free_ctrl;
932 }
933 break;
934
935 case PCI_VENDOR_ID_INTEL:
936 /* Check for speed capability (0=33, 1=66) */
937 if (subsystem_deviceid & 0x0001)
938 bus->max_bus_speed = PCI_SPEED_66MHz;
939 else
940 bus->max_bus_speed = PCI_SPEED_33MHz;
941
942 /* Check for push button */
943 if (subsystem_deviceid & 0x0002)
944 ctrl->push_button = 0;
945 else
946 ctrl->push_button = 1;
947
948 /* Check for slot switch type (0=mechanical, 1=not mechanical) */
949 if (subsystem_deviceid & 0x0004)
950 ctrl->slot_switch_type = 0;
951 else
952 ctrl->slot_switch_type = 1;
953
954 /* PHP Status (0=De-feature PHP, 1=Normal operation) */
955 if (subsystem_deviceid & 0x0008)
956 ctrl->defeature_PHP = 1; /* PHP supported */
957 else
958 ctrl->defeature_PHP = 0; /* PHP not supported */
959
960 /* Alternate Base Address Register Interface
961 * (0=not supported, 1=supported)
962 */
963 if (subsystem_deviceid & 0x0010)
964 ctrl->alternate_base_address = 1;
965 else
966 ctrl->alternate_base_address = 0;
967
968 /* PCI Config Space Index (0=not supported, 1=supported) */
969 if (subsystem_deviceid & 0x0020)
970 ctrl->pci_config_space = 1;
971 else
972 ctrl->pci_config_space = 0;
973
974 /* PCI-X support */
975 if (subsystem_deviceid & 0x0080) {
976 ctrl->pcix_support = 1;
977 if (subsystem_deviceid & 0x0040)
978 /* 133MHz PCI-X if bit 7 is 1 */
979 ctrl->pcix_speed_capability = 1;
980 else
981 /* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */
982 /* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */
983 ctrl->pcix_speed_capability = 0;
984 } else {
985 /* Conventional PCI */
986 ctrl->pcix_support = 0;
987 ctrl->pcix_speed_capability = 0;
988 }
989 break;
990
991 default:
992 err(msg_HPC_not_supported);
993 rc = -ENODEV;
994 goto err_free_ctrl;
995 }
996
997 /* Tell the user that we found one. */
998 info("Initializing the PCI hot plug controller residing on PCI bus %d\n",
999 pdev->bus->number);
1000
1001 dbg("Hotplug controller capabilities:\n");
1002 dbg(" speed_capability %d\n", bus->max_bus_speed);
1003 dbg(" slot_switch_type %s\n", ctrl->slot_switch_type ?
1004 "switch present" : "no switch");
1005 dbg(" defeature_PHP %s\n", ctrl->defeature_PHP ?
1006 "PHP supported" : "PHP not supported");
1007 dbg(" alternate_base_address %s\n", ctrl->alternate_base_address ?
1008 "supported" : "not supported");
1009 dbg(" pci_config_space %s\n", ctrl->pci_config_space ?
1010 "supported" : "not supported");
1011 dbg(" pcix_speed_capability %s\n", ctrl->pcix_speed_capability ?
1012 "supported" : "not supported");
1013 dbg(" pcix_support %s\n", ctrl->pcix_support ?
1014 "supported" : "not supported");
1015
1016 ctrl->pci_dev = pdev;
1017 pci_set_drvdata(pdev, ctrl);
1018
1019 /* make our own copy of the pci bus structure,
1020 * as we like tweaking it a lot */
1021 ctrl->pci_bus = kmemdup(pdev->bus, sizeof(*ctrl->pci_bus), GFP_KERNEL);
1022 if (!ctrl->pci_bus) {
1023 err("out of memory\n");
1024 rc = -ENOMEM;
1025 goto err_free_ctrl;
1026 }
1027
1028 ctrl->bus = pdev->bus->number;
1029 ctrl->rev = pdev->revision;
1030 dbg("bus device function rev: %d %d %d %d\n", ctrl->bus,
1031 PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), ctrl->rev);
1032
1033 mutex_init(&ctrl->crit_sect);
1034 init_waitqueue_head(&ctrl->queue);
1035
1036 /* initialize our threads if they haven't already been started up */
1037 rc = one_time_init();
1038 if (rc)
1039 goto err_free_bus;
1040
1041 dbg("pdev = %p\n", pdev);
1042 dbg("pci resource start %llx\n", (unsigned long long)pci_resource_start(pdev, 0));
1043 dbg("pci resource len %llx\n", (unsigned long long)pci_resource_len(pdev, 0));
1044
1045 if (!request_mem_region(pci_resource_start(pdev, 0),
1046 pci_resource_len(pdev, 0), MY_NAME)) {
1047 err("cannot reserve MMIO region\n");
1048 rc = -ENOMEM;
1049 goto err_free_bus;
1050 }
1051
1052 ctrl->hpc_reg = ioremap(pci_resource_start(pdev, 0),
1053 pci_resource_len(pdev, 0));
1054 if (!ctrl->hpc_reg) {
1055 err("cannot remap MMIO region %llx @ %llx\n",
1056 (unsigned long long)pci_resource_len(pdev, 0),
1057 (unsigned long long)pci_resource_start(pdev, 0));
1058 rc = -ENODEV;
1059 goto err_free_mem_region;
1060 }
1061
1062 /* Check for 66Mhz operation */
1063 bus->cur_bus_speed = get_controller_speed(ctrl);
1064
1065
1066 /********************************************************
1067 *
1068 * Save configuration headers for this and
1069 * subordinate PCI buses
1070 *
1071 ********************************************************/
1072
1073 /* find the physical slot number of the first hot plug slot */
1074
1075 /* Get slot won't work for devices behind bridges, but
1076 * in this case it will always be called for the "base"
1077 * bus/dev/func of a slot.
1078 * CS: this is leveraging the PCIIRQ routing code from the kernel
1079 * (pci-pc.c: get_irq_routing_table) */
1080 rc = get_slot_mapping(ctrl->pci_bus, pdev->bus->number,
1081 (readb(ctrl->hpc_reg + SLOT_MASK) >> 4),
1082 &(ctrl->first_slot));
1083 dbg("get_slot_mapping: first_slot = %d, returned = %d\n",
1084 ctrl->first_slot, rc);
1085 if (rc) {
1086 err(msg_initialization_err, rc);
1087 goto err_iounmap;
1088 }
1089
1090 /* Store PCI Config Space for all devices on this bus */
1091 rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK));
1092 if (rc) {
1093 err("%s: unable to save PCI configuration data, error %d\n",
1094 __func__, rc);
1095 goto err_iounmap;
1096 }
1097
1098 /*
1099 * Get IO, memory, and IRQ resources for new devices
1100 */
1101 /* The next line is required for cpqhp_find_available_resources */
1102 ctrl->interrupt = pdev->irq;
1103 if (ctrl->interrupt < 0x10) {
1104 cpqhp_legacy_mode = 1;
1105 dbg("System seems to be configured for Full Table Mapped MPS mode\n");
1106 }
1107
1108 ctrl->cfgspc_irq = 0;
1109 pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &ctrl->cfgspc_irq);
1110
1111 rc = cpqhp_find_available_resources(ctrl, cpqhp_rom_start);
1112 ctrl->add_support = !rc;
1113 if (rc) {
1114 dbg("cpqhp_find_available_resources = 0x%x\n", rc);
1115 err("unable to locate PCI configuration resources for hot plug add.\n");
1116 goto err_iounmap;
1117 }
1118
1119 /*
1120 * Finish setting up the hot plug ctrl device
1121 */
1122 ctrl->slot_device_offset = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
1123 dbg("NumSlots %d\n", ctrl->slot_device_offset);
1124
1125 ctrl->next_event = 0;
1126
1127 /* Setup the slot information structures */
1128 rc = ctrl_slot_setup(ctrl, smbios_start, smbios_table);
1129 if (rc) {
1130 err(msg_initialization_err, 6);
1131 err("%s: unable to save PCI configuration data, error %d\n",
1132 __func__, rc);
1133 goto err_iounmap;
1134 }
1135
1136 /* Mask all general input interrupts */
1137 writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_MASK);
1138
1139 /* set up the interrupt */
1140 dbg("HPC interrupt = %d\n", ctrl->interrupt);
1141 if (request_irq(ctrl->interrupt, cpqhp_ctrl_intr,
1142 IRQF_SHARED, MY_NAME, ctrl)) {
1143 err("Can't get irq %d for the hotplug pci controller\n",
1144 ctrl->interrupt);
1145 rc = -ENODEV;
1146 goto err_iounmap;
1147 }
1148
1149 /* Enable Shift Out interrupt and clear it, also enable SERR on power
1150 * fault
1151 */
1152 temp_word = readw(ctrl->hpc_reg + MISC);
1153 temp_word |= 0x4006;
1154 writew(temp_word, ctrl->hpc_reg + MISC);
1155
1156 /* Changed 05/05/97 to clear all interrupts at start */
1157 writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_INPUT_CLEAR);
1158
1159 ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
1160
1161 writel(0x0L, ctrl->hpc_reg + INT_MASK);
1162
1163 if (!cpqhp_ctrl_list) {
1164 cpqhp_ctrl_list = ctrl;
1165 ctrl->next = NULL;
1166 } else {
1167 ctrl->next = cpqhp_ctrl_list;
1168 cpqhp_ctrl_list = ctrl;
1169 }
1170
1171 /* turn off empty slots here unless command line option "ON" set
1172 * Wait for exclusive access to hardware
1173 */
1174 mutex_lock(&ctrl->crit_sect);
1175
1176 num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
1177
1178 /* find first device number for the ctrl */
1179 device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
1180
1181 while (num_of_slots) {
1182 dbg("num_of_slots: %d\n", num_of_slots);
1183 func = cpqhp_slot_find(ctrl->bus, device, 0);
1184 if (!func)
1185 break;
1186
1187 hp_slot = func->device - ctrl->slot_device_offset;
1188 dbg("hp_slot: %d\n", hp_slot);
1189
1190 /* We have to save the presence info for these slots */
1191 temp_word = ctrl->ctrl_int_comp >> 16;
1192 func->presence_save = (temp_word >> hp_slot) & 0x01;
1193 func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
1194
1195 if (ctrl->ctrl_int_comp & (0x1L << hp_slot))
1196 func->switch_save = 0;
1197 else
1198 func->switch_save = 0x10;
1199
1200 if (!power_mode)
1201 if (!func->is_a_board) {
1202 green_LED_off(ctrl, hp_slot);
1203 slot_disable(ctrl, hp_slot);
1204 }
1205
1206 device++;
1207 num_of_slots--;
1208 }
1209
1210 if (!power_mode) {
1211 set_SOGO(ctrl);
1212 /* Wait for SOBS to be unset */
1213 wait_for_ctrl_irq(ctrl);
1214 }
1215
1216 rc = init_SERR(ctrl);
1217 if (rc) {
1218 err("init_SERR failed\n");
1219 mutex_unlock(&ctrl->crit_sect);
1220 goto err_free_irq;
1221 }
1222
1223 /* Done with exclusive hardware access */
1224 mutex_unlock(&ctrl->crit_sect);
1225
1226 cpqhp_create_debugfs_files(ctrl);
1227
1228 return 0;
1229
1230 err_free_irq:
1231 free_irq(ctrl->interrupt, ctrl);
1232 err_iounmap:
1233 iounmap(ctrl->hpc_reg);
1234 err_free_mem_region:
1235 release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
1236 err_free_bus:
1237 kfree(ctrl->pci_bus);
1238 err_free_ctrl:
1239 kfree(ctrl);
1240 err_disable_device:
1241 pci_disable_device(pdev);
1242 return rc;
1243 }
1244
unload_cpqphpd(void)1245 static void __exit unload_cpqphpd(void)
1246 {
1247 struct pci_func *next;
1248 struct pci_func *TempSlot;
1249 int loop;
1250 u32 rc;
1251 struct controller *ctrl;
1252 struct controller *tctrl;
1253 struct pci_resource *res;
1254 struct pci_resource *tres;
1255
1256 rc = compaq_nvram_store(cpqhp_rom_start);
1257
1258 ctrl = cpqhp_ctrl_list;
1259
1260 while (ctrl) {
1261 if (ctrl->hpc_reg) {
1262 u16 misc;
1263 rc = read_slot_enable(ctrl);
1264
1265 writeb(0, ctrl->hpc_reg + SLOT_SERR);
1266 writel(0xFFFFFFC0L | ~rc, ctrl->hpc_reg + INT_MASK);
1267
1268 misc = readw(ctrl->hpc_reg + MISC);
1269 misc &= 0xFFFD;
1270 writew(misc, ctrl->hpc_reg + MISC);
1271 }
1272
1273 ctrl_slot_cleanup(ctrl);
1274
1275 res = ctrl->io_head;
1276 while (res) {
1277 tres = res;
1278 res = res->next;
1279 kfree(tres);
1280 }
1281
1282 res = ctrl->mem_head;
1283 while (res) {
1284 tres = res;
1285 res = res->next;
1286 kfree(tres);
1287 }
1288
1289 res = ctrl->p_mem_head;
1290 while (res) {
1291 tres = res;
1292 res = res->next;
1293 kfree(tres);
1294 }
1295
1296 res = ctrl->bus_head;
1297 while (res) {
1298 tres = res;
1299 res = res->next;
1300 kfree(tres);
1301 }
1302
1303 kfree(ctrl->pci_bus);
1304
1305 tctrl = ctrl;
1306 ctrl = ctrl->next;
1307 kfree(tctrl);
1308 }
1309
1310 for (loop = 0; loop < 256; loop++) {
1311 next = cpqhp_slot_list[loop];
1312 while (next != NULL) {
1313 res = next->io_head;
1314 while (res) {
1315 tres = res;
1316 res = res->next;
1317 kfree(tres);
1318 }
1319
1320 res = next->mem_head;
1321 while (res) {
1322 tres = res;
1323 res = res->next;
1324 kfree(tres);
1325 }
1326
1327 res = next->p_mem_head;
1328 while (res) {
1329 tres = res;
1330 res = res->next;
1331 kfree(tres);
1332 }
1333
1334 res = next->bus_head;
1335 while (res) {
1336 tres = res;
1337 res = res->next;
1338 kfree(tres);
1339 }
1340
1341 TempSlot = next;
1342 next = next->next;
1343 kfree(TempSlot);
1344 }
1345 }
1346
1347 /* Stop the notification mechanism */
1348 if (initialized)
1349 cpqhp_event_stop_thread();
1350
1351 /* unmap the rom address */
1352 if (cpqhp_rom_start)
1353 iounmap(cpqhp_rom_start);
1354 if (smbios_start)
1355 iounmap(smbios_start);
1356 }
1357
1358 static const struct pci_device_id hpcd_pci_tbl[] = {
1359 {
1360 /* handle any PCI Hotplug controller */
1361 .class = ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
1362 .class_mask = ~0,
1363
1364 /* no matter who makes it */
1365 .vendor = PCI_ANY_ID,
1366 .device = PCI_ANY_ID,
1367 .subvendor = PCI_ANY_ID,
1368 .subdevice = PCI_ANY_ID,
1369
1370 }, { /* end: all zeroes */ }
1371 };
1372
1373 MODULE_DEVICE_TABLE(pci, hpcd_pci_tbl);
1374
1375 static struct pci_driver cpqhpc_driver = {
1376 .name = "compaq_pci_hotplug",
1377 .id_table = hpcd_pci_tbl,
1378 .probe = cpqhpc_probe,
1379 /* remove: cpqhpc_remove_one, */
1380 };
1381
cpqhpc_init(void)1382 static int __init cpqhpc_init(void)
1383 {
1384 int result;
1385
1386 cpqhp_debug = debug;
1387
1388 info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
1389 cpqhp_initialize_debugfs();
1390 result = pci_register_driver(&cpqhpc_driver);
1391 dbg("pci_register_driver = %d\n", result);
1392 return result;
1393 }
1394
cpqhpc_cleanup(void)1395 static void __exit cpqhpc_cleanup(void)
1396 {
1397 dbg("unload_cpqphpd()\n");
1398 unload_cpqphpd();
1399
1400 dbg("pci_unregister_driver\n");
1401 pci_unregister_driver(&cpqhpc_driver);
1402 cpqhp_shutdown_debugfs();
1403 }
1404
1405 module_init(cpqhpc_init);
1406 module_exit(cpqhpc_cleanup);
1407