1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Target driver for EMC CLARiiON AX/CX-series hardware.
4  * Based on code from Lars Marowsky-Bree <lmb@suse.de>
5  * and Ed Goggin <egoggin@emc.com>.
6  *
7  * Copyright (C) 2006 Red Hat, Inc.  All rights reserved.
8  * Copyright (C) 2006 Mike Christie
9  */
10 #include <linux/slab.h>
11 #include <linux/module.h>
12 #include <scsi/scsi.h>
13 #include <scsi/scsi_eh.h>
14 #include <scsi/scsi_dh.h>
15 #include <scsi/scsi_device.h>
16 
17 #define CLARIION_NAME			"emc"
18 
19 #define CLARIION_TRESPASS_PAGE		0x22
20 #define CLARIION_BUFFER_SIZE		0xFC
21 #define CLARIION_TIMEOUT		(60 * HZ)
22 #define CLARIION_RETRIES		3
23 #define CLARIION_UNBOUND_LU		-1
24 #define CLARIION_SP_A			0
25 #define CLARIION_SP_B			1
26 
27 /* Flags */
28 #define CLARIION_SHORT_TRESPASS		1
29 #define CLARIION_HONOR_RESERVATIONS	2
30 
31 /* LUN states */
32 #define CLARIION_LUN_UNINITIALIZED	-1
33 #define CLARIION_LUN_UNBOUND		0
34 #define CLARIION_LUN_BOUND		1
35 #define CLARIION_LUN_OWNED		2
36 
37 static unsigned char long_trespass[] = {
38 	0, 0, 0, 0, 0, 0, 0, 0,
39 	CLARIION_TRESPASS_PAGE,	/* Page code */
40 	0x09,			/* Page length - 2 */
41 	0x01,			/* Trespass code */
42 	0xff, 0xff,		/* Trespass target */
43 	0, 0, 0, 0, 0, 0	/* Reserved bytes / unknown */
44 };
45 
46 static unsigned char short_trespass[] = {
47 	0, 0, 0, 0,
48 	CLARIION_TRESPASS_PAGE,	/* Page code */
49 	0x02,			/* Page length - 2 */
50 	0x01,			/* Trespass code */
51 	0xff,			/* Trespass target */
52 };
53 
54 static const char * lun_state[] =
55 {
56     "not bound",
57     "bound",
58     "owned",
59 };
60 
61 struct clariion_dh_data {
62 	/*
63 	 * Flags:
64 	 *  CLARIION_SHORT_TRESPASS
65 	 * Use short trespass command (FC-series) or the long version
66 	 * (default for AX/CX CLARiiON arrays).
67 	 *
68 	 *  CLARIION_HONOR_RESERVATIONS
69 	 * Whether or not (default) to honor SCSI reservations when
70 	 * initiating a switch-over.
71 	 */
72 	unsigned flags;
73 	/*
74 	 * I/O buffer for both MODE_SELECT and INQUIRY commands.
75 	 */
76 	unsigned char buffer[CLARIION_BUFFER_SIZE];
77 	/*
78 	 * LUN state
79 	 */
80 	int lun_state;
81 	/*
82 	 * SP Port number
83 	 */
84 	int port;
85 	/*
86 	 * which SP (A=0,B=1,UNBOUND=-1) is the default SP for this
87 	 * path's mapped LUN
88 	 */
89 	int default_sp;
90 	/*
91 	 * which SP (A=0,B=1,UNBOUND=-1) is the active SP for this
92 	 * path's mapped LUN
93 	 */
94 	int current_sp;
95 };
96 
97 /*
98  * Parse MODE_SELECT cmd reply.
99  */
trespass_endio(struct scsi_device * sdev,struct scsi_sense_hdr * sshdr)100 static int trespass_endio(struct scsi_device *sdev,
101 			  struct scsi_sense_hdr *sshdr)
102 {
103 	int err = SCSI_DH_IO;
104 
105 	sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
106 		    "0x%2x, 0x%2x while sending CLARiiON trespass "
107 		    "command.\n", CLARIION_NAME, sshdr->sense_key,
108 		    sshdr->asc, sshdr->ascq);
109 
110 	if (sshdr->sense_key == 0x05 && sshdr->asc == 0x04 &&
111 	    sshdr->ascq == 0x00) {
112 		/*
113 		 * Array based copy in progress -- do not send
114 		 * mode_select or copy will be aborted mid-stream.
115 		 */
116 		sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in "
117 			    "progress while sending CLARiiON trespass "
118 			    "command.\n", CLARIION_NAME);
119 		err = SCSI_DH_DEV_TEMP_BUSY;
120 	} else if (sshdr->sense_key == 0x02 && sshdr->asc == 0x04 &&
121 		   sshdr->ascq == 0x03) {
122 		/*
123 		 * LUN Not Ready - Manual Intervention Required
124 		 * indicates in-progress ucode upgrade (NDU).
125 		 */
126 		sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
127 			    "ucode upgrade NDU operation while sending "
128 			    "CLARiiON trespass command.\n", CLARIION_NAME);
129 		err = SCSI_DH_DEV_TEMP_BUSY;
130 	} else
131 		err = SCSI_DH_DEV_FAILED;
132 	return err;
133 }
134 
parse_sp_info_reply(struct scsi_device * sdev,struct clariion_dh_data * csdev)135 static int parse_sp_info_reply(struct scsi_device *sdev,
136 			       struct clariion_dh_data *csdev)
137 {
138 	int err = SCSI_DH_OK;
139 
140 	/* check for in-progress ucode upgrade (NDU) */
141 	if (csdev->buffer[48] != 0) {
142 		sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress "
143 			    "ucode upgrade NDU operation while finding "
144 			    "current active SP.", CLARIION_NAME);
145 		err = SCSI_DH_DEV_TEMP_BUSY;
146 		goto out;
147 	}
148 	if (csdev->buffer[4] > 2) {
149 		/* Invalid buffer format */
150 		sdev_printk(KERN_NOTICE, sdev,
151 			    "%s: invalid VPD page 0xC0 format\n",
152 			    CLARIION_NAME);
153 		err = SCSI_DH_NOSYS;
154 		goto out;
155 	}
156 	switch (csdev->buffer[28] & 0x0f) {
157 	case 6:
158 		sdev_printk(KERN_NOTICE, sdev,
159 			    "%s: ALUA failover mode detected\n",
160 			    CLARIION_NAME);
161 		break;
162 	case 4:
163 		/* Linux failover */
164 		break;
165 	default:
166 		sdev_printk(KERN_WARNING, sdev,
167 			    "%s: Invalid failover mode %d\n",
168 			    CLARIION_NAME, csdev->buffer[28] & 0x0f);
169 		err = SCSI_DH_NOSYS;
170 		goto out;
171 	}
172 
173 	csdev->default_sp = csdev->buffer[5];
174 	csdev->lun_state = csdev->buffer[4];
175 	csdev->current_sp = csdev->buffer[8];
176 	csdev->port = csdev->buffer[7];
177 	if (csdev->lun_state == CLARIION_LUN_OWNED)
178 		sdev->access_state = SCSI_ACCESS_STATE_OPTIMAL;
179 	else
180 		sdev->access_state = SCSI_ACCESS_STATE_STANDBY;
181 	if (csdev->default_sp == csdev->current_sp)
182 		sdev->access_state |= SCSI_ACCESS_STATE_PREFERRED;
183 out:
184 	return err;
185 }
186 
187 #define emc_default_str "FC (Legacy)"
188 
parse_sp_model(struct scsi_device * sdev,unsigned char * buffer)189 static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer)
190 {
191 	unsigned char len = buffer[4] + 5;
192 	char *sp_model = NULL;
193 	unsigned char sp_len, serial_len;
194 
195 	if (len < 160) {
196 		sdev_printk(KERN_WARNING, sdev,
197 			    "%s: Invalid information section length %d\n",
198 			    CLARIION_NAME, len);
199 		/* Check for old FC arrays */
200 		if (!strncmp(buffer + 8, "DGC", 3)) {
201 			/* Old FC array, not supporting extended information */
202 			sp_model = emc_default_str;
203 		}
204 		goto out;
205 	}
206 
207 	/*
208 	 * Parse extended information for SP model number
209 	 */
210 	serial_len = buffer[160];
211 	if (serial_len == 0 || serial_len + 161 > len) {
212 		sdev_printk(KERN_WARNING, sdev,
213 			    "%s: Invalid array serial number length %d\n",
214 			    CLARIION_NAME, serial_len);
215 		goto out;
216 	}
217 	sp_len = buffer[99];
218 	if (sp_len == 0 || serial_len + sp_len + 161 > len) {
219 		sdev_printk(KERN_WARNING, sdev,
220 			    "%s: Invalid model number length %d\n",
221 			    CLARIION_NAME, sp_len);
222 		goto out;
223 	}
224 	sp_model = &buffer[serial_len + 161];
225 	/* Strip whitespace at the end */
226 	while (sp_len > 1 && sp_model[sp_len - 1] == ' ')
227 		sp_len--;
228 
229 	sp_model[sp_len] = '\0';
230 
231 out:
232 	return sp_model;
233 }
234 
send_trespass_cmd(struct scsi_device * sdev,struct clariion_dh_data * csdev)235 static int send_trespass_cmd(struct scsi_device *sdev,
236 			    struct clariion_dh_data *csdev)
237 {
238 	unsigned char *page22;
239 	unsigned char cdb[MAX_COMMAND_SIZE];
240 	int err, res = SCSI_DH_OK, len;
241 	struct scsi_sense_hdr sshdr;
242 	u64 req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
243 		REQ_FAILFAST_DRIVER;
244 
245 	if (csdev->flags & CLARIION_SHORT_TRESPASS) {
246 		page22 = short_trespass;
247 		if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
248 			/* Set Honor Reservations bit */
249 			page22[6] |= 0x80;
250 		len = sizeof(short_trespass);
251 		cdb[0] = MODE_SELECT;
252 		cdb[1] = 0x10;
253 		cdb[4] = len;
254 	} else {
255 		page22 = long_trespass;
256 		if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
257 			/* Set Honor Reservations bit */
258 			page22[10] |= 0x80;
259 		len = sizeof(long_trespass);
260 		cdb[0] = MODE_SELECT_10;
261 		cdb[8] = len;
262 	}
263 	BUG_ON((len > CLARIION_BUFFER_SIZE));
264 	memcpy(csdev->buffer, page22, len);
265 
266 	err = scsi_execute(sdev, cdb, DMA_TO_DEVICE, csdev->buffer, len, NULL,
267 			&sshdr, CLARIION_TIMEOUT * HZ, CLARIION_RETRIES,
268 			req_flags, 0, NULL);
269 	if (err) {
270 		if (scsi_sense_valid(&sshdr))
271 			res = trespass_endio(sdev, &sshdr);
272 		else {
273 			sdev_printk(KERN_INFO, sdev,
274 				    "%s: failed to send MODE SELECT: %x\n",
275 				    CLARIION_NAME, err);
276 			res = SCSI_DH_IO;
277 		}
278 	}
279 
280 	return res;
281 }
282 
clariion_check_sense(struct scsi_device * sdev,struct scsi_sense_hdr * sense_hdr)283 static enum scsi_disposition clariion_check_sense(struct scsi_device *sdev,
284 					struct scsi_sense_hdr *sense_hdr)
285 {
286 	switch (sense_hdr->sense_key) {
287 	case NOT_READY:
288 		if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03)
289 			/*
290 			 * LUN Not Ready - Manual Intervention Required
291 			 * indicates this is a passive path.
292 			 *
293 			 * FIXME: However, if this is seen and EVPD C0
294 			 * indicates that this is due to a NDU in
295 			 * progress, we should set FAIL_PATH too.
296 			 * This indicates we might have to do a SCSI
297 			 * inquiry in the end_io path. Ugh.
298 			 *
299 			 * Can return FAILED only when we want the error
300 			 * recovery process to kick in.
301 			 */
302 			return SUCCESS;
303 		break;
304 	case ILLEGAL_REQUEST:
305 		if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01)
306 			/*
307 			 * An array based copy is in progress. Do not
308 			 * fail the path, do not bypass to another PG,
309 			 * do not retry. Fail the IO immediately.
310 			 * (Actually this is the same conclusion as in
311 			 * the default handler, but lets make sure.)
312 			 *
313 			 * Can return FAILED only when we want the error
314 			 * recovery process to kick in.
315 			 */
316 			return SUCCESS;
317 		break;
318 	case UNIT_ATTENTION:
319 		if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
320 			/*
321 			 * Unit Attention Code. This is the first IO
322 			 * to the new path, so just retry.
323 			 */
324 			return ADD_TO_MLQUEUE;
325 		break;
326 	}
327 
328 	return SCSI_RETURN_NOT_HANDLED;
329 }
330 
clariion_prep_fn(struct scsi_device * sdev,struct request * req)331 static blk_status_t clariion_prep_fn(struct scsi_device *sdev,
332 		struct request *req)
333 {
334 	struct clariion_dh_data *h = sdev->handler_data;
335 
336 	if (h->lun_state != CLARIION_LUN_OWNED) {
337 		req->rq_flags |= RQF_QUIET;
338 		return BLK_STS_IOERR;
339 	}
340 
341 	return BLK_STS_OK;
342 }
343 
clariion_std_inquiry(struct scsi_device * sdev,struct clariion_dh_data * csdev)344 static int clariion_std_inquiry(struct scsi_device *sdev,
345 				struct clariion_dh_data *csdev)
346 {
347 	int err = SCSI_DH_OK;
348 	char *sp_model;
349 
350 	sp_model = parse_sp_model(sdev, sdev->inquiry);
351 	if (!sp_model) {
352 		err = SCSI_DH_DEV_UNSUPP;
353 		goto out;
354 	}
355 
356 	/*
357 	 * FC Series arrays do not support long trespass
358 	 */
359 	if (!strlen(sp_model) || !strncmp(sp_model, "FC",2))
360 		csdev->flags |= CLARIION_SHORT_TRESPASS;
361 
362 	sdev_printk(KERN_INFO, sdev,
363 		    "%s: detected Clariion %s, flags %x\n",
364 		    CLARIION_NAME, sp_model, csdev->flags);
365 out:
366 	return err;
367 }
368 
clariion_send_inquiry(struct scsi_device * sdev,struct clariion_dh_data * csdev)369 static int clariion_send_inquiry(struct scsi_device *sdev,
370 				 struct clariion_dh_data *csdev)
371 {
372 	int err = SCSI_DH_IO;
373 
374 	if (!scsi_get_vpd_page(sdev, 0xC0, csdev->buffer,
375 			       CLARIION_BUFFER_SIZE))
376 		err = parse_sp_info_reply(sdev, csdev);
377 
378 	return err;
379 }
380 
clariion_activate(struct scsi_device * sdev,activate_complete fn,void * data)381 static int clariion_activate(struct scsi_device *sdev,
382 				activate_complete fn, void *data)
383 {
384 	struct clariion_dh_data *csdev = sdev->handler_data;
385 	int result;
386 
387 	result = clariion_send_inquiry(sdev, csdev);
388 	if (result != SCSI_DH_OK)
389 		goto done;
390 
391 	if (csdev->lun_state == CLARIION_LUN_OWNED)
392 		goto done;
393 
394 	result = send_trespass_cmd(sdev, csdev);
395 	if (result != SCSI_DH_OK)
396 		goto done;
397 	sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n",
398 		    CLARIION_NAME,
399 		    csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" );
400 
401 	/* Update status */
402 	result = clariion_send_inquiry(sdev, csdev);
403 	if (result != SCSI_DH_OK)
404 		goto done;
405 
406 done:
407 	sdev_printk(KERN_INFO, sdev,
408 		    "%s: at SP %c Port %d (%s, default SP %c)\n",
409 		    CLARIION_NAME, csdev->current_sp + 'A',
410 		    csdev->port, lun_state[csdev->lun_state],
411 		    csdev->default_sp + 'A');
412 
413 	if (fn)
414 		fn(data, result);
415 	return 0;
416 }
417 /*
418  * params - parameters in the following format
419  *      "no_of_params\0param1\0param2\0param3\0...\0"
420  *      for example, string for 2 parameters with value 10 and 21
421  *      is specified as "2\010\021\0".
422  */
clariion_set_params(struct scsi_device * sdev,const char * params)423 static int clariion_set_params(struct scsi_device *sdev, const char *params)
424 {
425 	struct clariion_dh_data *csdev = sdev->handler_data;
426 	unsigned int hr = 0, st = 0, argc;
427 	const char *p = params;
428 	int result = SCSI_DH_OK;
429 
430 	if ((sscanf(params, "%u", &argc) != 1) || (argc != 2))
431 		return -EINVAL;
432 
433 	while (*p++)
434 		;
435 	if ((sscanf(p, "%u", &st) != 1) || (st > 1))
436 		return -EINVAL;
437 
438 	while (*p++)
439 		;
440 	if ((sscanf(p, "%u", &hr) != 1) || (hr > 1))
441 		return -EINVAL;
442 
443 	if (st)
444 		csdev->flags |= CLARIION_SHORT_TRESPASS;
445 	else
446 		csdev->flags &= ~CLARIION_SHORT_TRESPASS;
447 
448 	if (hr)
449 		csdev->flags |= CLARIION_HONOR_RESERVATIONS;
450 	else
451 		csdev->flags &= ~CLARIION_HONOR_RESERVATIONS;
452 
453 	/*
454 	 * If this path is owned, we have to send a trespass command
455 	 * with the new parameters. If not, simply return. Next trespass
456 	 * command would use the parameters.
457 	 */
458 	if (csdev->lun_state != CLARIION_LUN_OWNED)
459 		goto done;
460 
461 	csdev->lun_state = CLARIION_LUN_UNINITIALIZED;
462 	result = send_trespass_cmd(sdev, csdev);
463 	if (result != SCSI_DH_OK)
464 		goto done;
465 
466 	/* Update status */
467 	result = clariion_send_inquiry(sdev, csdev);
468 
469 done:
470 	return result;
471 }
472 
clariion_bus_attach(struct scsi_device * sdev)473 static int clariion_bus_attach(struct scsi_device *sdev)
474 {
475 	struct clariion_dh_data *h;
476 	int err;
477 
478 	h = kzalloc(sizeof(*h) , GFP_KERNEL);
479 	if (!h)
480 		return SCSI_DH_NOMEM;
481 	h->lun_state = CLARIION_LUN_UNINITIALIZED;
482 	h->default_sp = CLARIION_UNBOUND_LU;
483 	h->current_sp = CLARIION_UNBOUND_LU;
484 
485 	err = clariion_std_inquiry(sdev, h);
486 	if (err != SCSI_DH_OK)
487 		goto failed;
488 
489 	err = clariion_send_inquiry(sdev, h);
490 	if (err != SCSI_DH_OK)
491 		goto failed;
492 
493 	sdev_printk(KERN_INFO, sdev,
494 		    "%s: connected to SP %c Port %d (%s, default SP %c)\n",
495 		    CLARIION_NAME, h->current_sp + 'A',
496 		    h->port, lun_state[h->lun_state],
497 		    h->default_sp + 'A');
498 
499 	sdev->handler_data = h;
500 	return SCSI_DH_OK;
501 
502 failed:
503 	kfree(h);
504 	return err;
505 }
506 
clariion_bus_detach(struct scsi_device * sdev)507 static void clariion_bus_detach(struct scsi_device *sdev)
508 {
509 	kfree(sdev->handler_data);
510 	sdev->handler_data = NULL;
511 }
512 
513 static struct scsi_device_handler clariion_dh = {
514 	.name		= CLARIION_NAME,
515 	.module		= THIS_MODULE,
516 	.attach		= clariion_bus_attach,
517 	.detach		= clariion_bus_detach,
518 	.check_sense	= clariion_check_sense,
519 	.activate	= clariion_activate,
520 	.prep_fn	= clariion_prep_fn,
521 	.set_params	= clariion_set_params,
522 };
523 
clariion_init(void)524 static int __init clariion_init(void)
525 {
526 	int r;
527 
528 	r = scsi_register_device_handler(&clariion_dh);
529 	if (r != 0)
530 		printk(KERN_ERR "%s: Failed to register scsi device handler.",
531 			CLARIION_NAME);
532 	return r;
533 }
534 
clariion_exit(void)535 static void __exit clariion_exit(void)
536 {
537 	scsi_unregister_device_handler(&clariion_dh);
538 }
539 
540 module_init(clariion_init);
541 module_exit(clariion_exit);
542 
543 MODULE_DESCRIPTION("EMC CX/AX/FC-family driver");
544 MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, Chandra Seetharaman <sekharan@us.ibm.com>");
545 MODULE_LICENSE("GPL");
546