1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree file for Wiliboard WBD-222
4 */
5
6/dts-v1/;
7
8#include "gemini.dtsi"
9#include <dt-bindings/input/input.h>
10
11/ {
12	model = "Wiliboard WBD-222";
13	compatible = "wiliboard,wbd222", "cortina,gemini";
14	#address-cells = <1>;
15	#size-cells = <1>;
16
17	memory@0 { /* 128 MB */
18		device_type = "memory";
19		reg = <0x00000000 0x8000000>;
20	};
21
22	chosen {
23		bootargs = "console=ttyS0,115200n8";
24		stdout-path = &uart0;
25	};
26
27	gpio_keys {
28		compatible = "gpio-keys";
29
30		button-setup {
31			debounce-interval = <100>;
32			wakeup-source;
33			linux,code = <KEY_SETUP>;
34			label = "reset";
35			/* Conflict with ICE */
36			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
37		};
38	};
39
40	leds {
41		compatible = "gpio-leds";
42
43		led-red-l3 {
44			label = "wbd111:red:L3";
45			/* Conflict with TVC and extended parallel flash */
46			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
47			default-state = "off";
48		};
49		led-green-l4 {
50			label = "wbd111:green:L4";
51			/* Conflict with TVC and extended parallel flash */
52			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
53			default-state = "off";
54		};
55		led-red-l4 {
56			label = "wbd111:red:L4";
57			/* Conflict with TVC and extended parallel flash */
58			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
59			default-state = "off";
60		};
61		led-green-l3 {
62			label = "wbd111:green:L3";
63			/* Conflict with TVC and extended parallel flash */
64			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
65			default-state = "on";
66			linux,default-trigger = "heartbeat";
67		};
68	};
69
70	mdio0: ethernet-phy {
71		compatible = "virtual,mdio-gpio";
72		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
73			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
74		#address-cells = <1>;
75		#size-cells = <0>;
76
77		phy0: ethernet-phy@1 {
78			reg = <1>;
79			device_type = "ethernet-phy";
80		};
81
82		phy1: ethernet-phy@3 {
83			reg = <3>;
84			device_type = "ethernet-phy";
85		};
86	};
87
88	soc {
89		flash@30000000 {
90			status = "okay";
91			/* 8MB of flash */
92			reg = <0x30000000 0x00800000>;
93
94			partition@0 {
95				label = "RedBoot";
96				reg = <0x00000000 0x00020000>;
97				read-only;
98			};
99			partition@20000 {
100				label = "kernel";
101				reg = <0x00020000 0x00100000>;
102			};
103			partition@120000 {
104				label = "rootfs";
105				reg = <0x00120000 0x006a0000>;
106			};
107			partition@7c0000 {
108				label = "VCTL";
109				reg = <0x007c0000 0x00010000>;
110				read-only;
111			};
112			partition@7d0000 {
113				label = "cfg";
114				reg = <0x007d0000 0x00010000>;
115				read-only;
116			};
117			partition@7e0000 {
118				label = "FIS";
119				reg = <0x007e0000 0x00010000>;
120				read-only;
121			};
122		};
123
124		syscon: syscon@40000000 {
125			pinctrl {
126				/*
127				 * gpio0agrp cover line 0-4
128				 * gpio0bgrp cover line 5
129				 */
130				gpio0_default_pins: pinctrl-gpio0 {
131					mux {
132						function = "gpio0";
133						groups = "gpio0agrp",
134						"gpio0bgrp";
135					};
136				};
137				pinctrl-gmii {
138					/* This platform use both the ethernet ports */
139					mux {
140						function = "gmii";
141						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
142					};
143				};
144			};
145		};
146
147		gpio0: gpio@4d000000 {
148			pinctrl-names = "default";
149			pinctrl-0 = <&gpio0_default_pins>;
150		};
151
152		pci@50000000 {
153			status = "okay";
154			interrupt-map-mask = <0xf800 0 0 7>;
155			interrupt-map =
156				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
157				<0x4800 0 0 2 &pci_intc 1>,
158				<0x4800 0 0 3 &pci_intc 2>,
159				<0x4800 0 0 4 &pci_intc 3>,
160				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
161				<0x5000 0 0 2 &pci_intc 2>,
162				<0x5000 0 0 3 &pci_intc 3>,
163				<0x5000 0 0 4 &pci_intc 0>,
164				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
165				<0x5800 0 0 2 &pci_intc 3>,
166				<0x5800 0 0 3 &pci_intc 0>,
167				<0x5800 0 0 4 &pci_intc 1>,
168				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
169				<0x6000 0 0 2 &pci_intc 0>,
170				<0x6000 0 0 3 &pci_intc 1>,
171				<0x6000 0 0 4 &pci_intc 2>;
172		};
173
174		ethernet@60000000 {
175			status = "okay";
176
177			ethernet-port@0 {
178				phy-mode = "rgmii";
179				phy-handle = <&phy0>;
180			};
181			ethernet-port@1 {
182				phy-mode = "rgmii";
183				phy-handle = <&phy1>;
184			};
185		};
186
187		usb@68000000 {
188			status = "okay";
189		};
190
191		usb@69000000 {
192			status = "okay";
193		};
194	};
195};
196