1// SPDX-License-Identifier: GPL-2.0 2// 3// Copyright (C) 2015-2018 Y Soft Corporation, a.s. 4 5#include <dt-bindings/gpio/gpio.h> 6#include <dt-bindings/interrupt-controller/irq.h> 7#include <dt-bindings/input/input.h> 8#include <dt-bindings/pwm/pwm.h> 9 10/ { 11 aliases: aliases { 12 ethernet1 = ð1; 13 ethernet2 = ð2; 14 }; 15 16 backlight: backlight { 17 compatible = "pwm-backlight"; 18 pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>; 19 brightness-levels = <0 32 64 128 255>; 20 default-brightness-level = <32>; 21 num-interpolated-steps = <8>; 22 power-supply = <&sw2_reg>; 23 status = "disabled"; 24 }; 25 26 lcd_display: display { 27 compatible = "fsl,imx-parallel-display"; 28 #address-cells = <1>; 29 #size-cells = <0>; 30 interface-pix-fmt = "rgb24"; 31 pinctrl-names = "default"; 32 pinctrl-0 = <&pinctrl_ipu1>; 33 status = "disabled"; 34 35 port@0 { 36 reg = <0>; 37 38 lcd_display_in: endpoint { 39 remote-endpoint = <&ipu1_di0_disp0>; 40 }; 41 }; 42 43 port@1 { 44 reg = <1>; 45 46 lcd_display_out: endpoint { 47 remote-endpoint = <&lcd_panel_in>; 48 }; 49 }; 50 }; 51 52 panel: panel { 53 compatible = "dataimage,scf0700c48ggu18"; 54 power-supply = <&sw2_reg>; 55 status = "disabled"; 56 57 port { 58 lcd_panel_in: endpoint { 59 remote-endpoint = <&lcd_display_out>; 60 }; 61 }; 62 }; 63 64 reg_pcie: regulator-pcie { 65 compatible = "regulator-fixed"; 66 pinctrl-names = "default"; 67 pinctrl-0 = <&pinctrl_pcie_reg>; 68 regulator-name = "MPCIE_3V3"; 69 regulator-min-microvolt = <3300000>; 70 regulator-max-microvolt = <3300000>; 71 gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; 72 enable-active-high; 73 status = "disabled"; 74 }; 75 76 reg_usb_h1_vbus: regulator-usb-h1-vbus { 77 compatible = "regulator-fixed"; 78 pinctrl-names = "default"; 79 pinctrl-0 = <&pinctrl_usbh1_vbus>; 80 regulator-name = "usb_h1_vbus"; 81 regulator-min-microvolt = <5000000>; 82 regulator-max-microvolt = <5000000>; 83 gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; 84 enable-active-high; 85 status = "disabled"; 86 }; 87 88 reg_usb_otg_vbus: regulator-usb-otg-vbus { 89 compatible = "regulator-fixed"; 90 pinctrl-names = "default"; 91 pinctrl-0 = <&pinctrl_usbotg_vbus>; 92 regulator-name = "usb_otg_vbus"; 93 regulator-min-microvolt = <5000000>; 94 regulator-max-microvolt = <5000000>; 95 gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; 96 enable-active-high; 97 status = "okay"; 98 }; 99}; 100 101&fec { 102 pinctrl-names = "default"; 103 pinctrl-0 = <&pinctrl_enet>; 104 phy-mode = "rgmii-id"; 105 phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; 106 phy-reset-duration = <20>; 107 phy-supply = <&sw2_reg>; 108 phy-handle = <ðphy0>; 109 status = "okay"; 110 111 mdio { 112 #address-cells = <1>; 113 #size-cells = <0>; 114 115 phy_port2: phy@1 { 116 reg = <1>; 117 }; 118 119 phy_port3: phy@2 { 120 reg = <2>; 121 }; 122 123 switch@10 { 124 compatible = "qca,qca8334"; 125 reg = <10>; 126 127 switch_ports: ports { 128 #address-cells = <1>; 129 #size-cells = <0>; 130 131 ethphy0: port@0 { 132 reg = <0>; 133 label = "cpu"; 134 phy-mode = "rgmii-id"; 135 ethernet = <&fec>; 136 137 fixed-link { 138 speed = <1000>; 139 full-duplex; 140 }; 141 }; 142 143 eth2: port@2 { 144 reg = <2>; 145 label = "eth2"; 146 phy-handle = <&phy_port2>; 147 }; 148 149 eth1: port@3 { 150 reg = <3>; 151 label = "eth1"; 152 phy-handle = <&phy_port3>; 153 }; 154 }; 155 }; 156 }; 157}; 158 159&hdmi { 160 pinctrl-names = "default"; 161 pinctrl-0 = <&pinctrl_hdmi_cec>; 162 ddc-i2c-bus = <&i2c2>; 163 status = "disabled"; 164}; 165 166&i2c2 { 167 clock-frequency = <100000>; 168 pinctrl-names = "default"; 169 pinctrl-0 = <&pinctrl_i2c2>; 170 status = "okay"; 171 172 pmic@8 { 173 compatible = "fsl,pfuze200"; 174 pinctrl-names = "default"; 175 pinctrl-0 = <&pinctrl_pmic>; 176 reg = <0x8>; 177 178 regulators { 179 sw1a_reg: sw1ab { 180 regulator-min-microvolt = <300000>; 181 regulator-max-microvolt = <1875000>; 182 regulator-boot-on; 183 regulator-always-on; 184 regulator-ramp-delay = <6250>; 185 }; 186 187 sw2_reg: sw2 { 188 regulator-min-microvolt = <800000>; 189 regulator-max-microvolt = <3300000>; 190 regulator-boot-on; 191 regulator-always-on; 192 }; 193 194 sw3a_reg: sw3a { 195 regulator-min-microvolt = <400000>; 196 regulator-max-microvolt = <1975000>; 197 regulator-boot-on; 198 regulator-always-on; 199 }; 200 201 sw3b_reg: sw3b { 202 regulator-min-microvolt = <400000>; 203 regulator-max-microvolt = <1975000>; 204 regulator-boot-on; 205 regulator-always-on; 206 }; 207 208 swbst_reg: swbst { 209 regulator-min-microvolt = <5000000>; 210 regulator-max-microvolt = <5150000>; 211 }; 212 213 vgen1_reg: vgen1 { 214 regulator-min-microvolt = <800000>; 215 regulator-max-microvolt = <1550000>; 216 }; 217 218 vgen2_reg: vgen2 { 219 regulator-min-microvolt = <800000>; 220 regulator-max-microvolt = <1550000>; 221 }; 222 223 vgen3_reg: vgen3 { 224 regulator-min-microvolt = <1800000>; 225 regulator-max-microvolt = <3300000>; 226 regulator-always-on; 227 }; 228 229 vgen4_reg: vgen4 { 230 regulator-min-microvolt = <1800000>; 231 regulator-max-microvolt = <3300000>; 232 regulator-always-on; 233 }; 234 235 vgen5_reg: vgen5 { 236 regulator-min-microvolt = <1800000>; 237 regulator-max-microvolt = <3300000>; 238 regulator-always-on; 239 }; 240 241 vgen6_reg: vgen6 { 242 regulator-min-microvolt = <1800000>; 243 regulator-max-microvolt = <3300000>; 244 regulator-always-on; 245 }; 246 247 vref_reg: vrefddr { 248 regulator-boot-on; 249 regulator-always-on; 250 }; 251 252 vsnvs_reg: vsnvs { 253 regulator-min-microvolt = <1000000>; 254 regulator-max-microvolt = <3000000>; 255 regulator-boot-on; 256 regulator-always-on; 257 }; 258 }; 259 }; 260 261 leds: led-controller@30 { 262 compatible = "ti,lp5562"; 263 reg = <0x30>; 264 clock-mode = /bits/ 8 <1>; 265 status = "disabled"; 266 #address-cells = <1>; 267 #size-cells = <0>; 268 269 chan@0 { 270 chan-name = "R"; 271 led-cur = /bits/ 8 <0x20>; 272 max-cur = /bits/ 8 <0x60>; 273 reg = <0>; 274 }; 275 276 chan@1 { 277 chan-name = "G"; 278 led-cur = /bits/ 8 <0x20>; 279 max-cur = /bits/ 8 <0x60>; 280 reg = <1>; 281 }; 282 283 chan@2 { 284 chan-name = "B"; 285 led-cur = /bits/ 8 <0x20>; 286 max-cur = /bits/ 8 <0x60>; 287 reg = <2>; 288 }; 289 290 chan@3 { 291 chan-name = "W"; 292 led-cur = /bits/ 8 <0x0>; 293 max-cur = /bits/ 8 <0x0>; 294 reg = <3>; 295 }; 296 }; 297 298 eeprom@57 { 299 compatible = "atmel,24c128"; 300 reg = <0x57>; 301 pagesize = <64>; 302 status = "okay"; 303 }; 304 305 touchscreen: touchscreen@5c { 306 compatible = "pixcir,pixcir_tangoc"; 307 reg = <0x5c>; 308 pinctrl-0 = <&pinctrl_touch>; 309 interrupt-parent = <&gpio4>; 310 interrupts = <5 IRQ_TYPE_EDGE_FALLING>; 311 attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; 312 reset-gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; 313 touchscreen-size-x = <800>; 314 touchscreen-size-y = <480>; 315 status = "disabled"; 316 }; 317}; 318 319&i2c3 { 320 clock-frequency = <100000>; 321 pinctrl-names = "default"; 322 pinctrl-0 = <&pinctrl_i2c3>; 323 status = "okay"; 324 325 oled_1309: oled@3c { 326 compatible = "solomon,ssd1309fb-i2c"; 327 reg = <0x3c>; 328 solomon,height = <64>; 329 solomon,width = <128>; 330 solomon,page-offset = <0>; 331 solomon,segment-no-remap; 332 solomon,prechargep2 = <15>; 333 reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; 334 vbat-supply = <&sw2_reg>; 335 status = "disabled"; 336 }; 337 338 oled_1305: oled@3d { 339 compatible = "solomon,ssd1305fb-i2c"; 340 reg = <0x3d>; 341 solomon,height = <64>; 342 solomon,width = <128>; 343 solomon,page-offset = <0>; 344 solomon,prechargep2 = <15>; 345 reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>; 346 vbat-supply = <&sw2_reg>; 347 status = "disabled"; 348 }; 349 350 gpio_oled: gpio@41 { 351 compatible = "nxp,pca9536"; 352 gpio-controller; 353 #gpio-cells = <2>; 354 reg = <0x41>; 355 vcc-supply = <&sw2_reg>; 356 status = "disabled"; 357 }; 358 359 touchkeys: keys@5a { 360 compatible = "fsl,mpr121-touchkey"; 361 reg = <0x5a>; 362 vdd-supply = <&sw2_reg>; 363 autorepeat; 364 linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>, 365 <KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>, 366 <KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>; 367 poll-interval = <50>; 368 status = "disabled"; 369 }; 370}; 371 372&iomuxc { 373 pinctrl_enet: enetgrp { 374 fsl,pins = < 375 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b020 376 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b020 377 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 378 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b020 379 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b020 380 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b020 381 MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b020 382 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b020 383 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b020 384 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b020 385 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b020 386 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b020 387 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b020 388 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b020 389 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b010 390 MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b010 391 MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b098 392 >; 393 }; 394 395 pinctrl_hdmi_cec: hdmicecgrp { 396 fsl,pins = < 397 MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1b898 398 >; 399 }; 400 401 pinctrl_i2c2: i2c2grp { 402 fsl,pins = < 403 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b899 404 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b899 405 >; 406 }; 407 408 pinctrl_i2c3: i2c3grp { 409 fsl,pins = < 410 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b899 411 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899 412 >; 413 }; 414 415 pinctrl_ipu1: ipu1grp { 416 fsl,pins = < 417 MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 418 MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 419 MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 420 MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 421 MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 422 MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 423 MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 424 MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 425 MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 426 MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 427 MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 428 MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 429 MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 430 MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 431 MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 432 MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 433 MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 434 MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 435 MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 436 MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 437 MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 438 MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 439 MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 440 MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 441 MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 442 MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 443 MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 444 >; 445 }; 446 447 pinctrl_pcie: pciegrp { 448 fsl,pins = < 449 MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b098 450 MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b098 451 MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b098 452 >; 453 }; 454 455 pinctrl_pcie_reg: pciereggrp { 456 fsl,pins = < 457 MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b098 458 >; 459 }; 460 461 pinctrl_pmic: pmicgrp { 462 fsl,pins = < 463 MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b098 464 >; 465 }; 466 467 pinctrl_pwm1: pwm1grp { 468 fsl,pins = < 469 MX6QDL_PAD_GPIO_9__PWM1_OUT 0x8 470 >; 471 }; 472 473 pinctrl_touch: touchgrp { 474 fsl,pins = < 475 MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b098 476 MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b098 477 >; 478 }; 479 480 pinctrl_uart1: uart1grp { 481 fsl,pins = < 482 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0a8 483 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0a8 484 >; 485 }; 486 487 pinctrl_uart2: uart2grp { 488 fsl,pins = < 489 MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b098 490 MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b098 491 >; 492 }; 493 494 pinctrl_usbh1: usbh1grp { 495 fsl,pins = < 496 MX6QDL_PAD_EIM_D30__USB_H1_OC 0x1b098 497 >; 498 }; 499 500 pinctrl_usbh1_vbus: usbh1-vbus { 501 fsl,pins = < 502 MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x98 503 >; 504 }; 505 506 pinctrl_usbotg: usbotggrp { 507 fsl,pins = < 508 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b098 509 MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b098 510 >; 511 }; 512 513 pinctrl_usbotg_vbus: usbotg-vbus { 514 fsl,pins = < 515 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x98 516 >; 517 }; 518 519 pinctrl_usdhc3: usdhc3grp { 520 fsl,pins = < 521 MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b018 522 MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b018 523 MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 524 MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 525 MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 526 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 527 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 528 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 529 >; 530 }; 531 532 pinctrl_usdhc4: usdhc4grp { 533 fsl,pins = < 534 MX6QDL_PAD_SD4_CMD__SD4_CMD 0x1f069 535 MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10069 536 MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17069 537 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17069 538 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17069 539 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17069 540 MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17069 541 MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17069 542 MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17069 543 MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17069 544 >; 545 }; 546 547 pinctrl_wdog: wdoggrp { 548 fsl,pins = < 549 MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 550 >; 551 }; 552}; 553 554&ipu1_di0_disp0 { 555 remote-endpoint = <&lcd_display_in>; 556}; 557 558&pcie { 559 pinctrl-names = "default"; 560 pinctrl-0 = <&pinctrl_pcie>; 561 reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; 562 vpcie-supply = <®_pcie>; 563 status = "disabled"; 564}; 565 566&pwm1 { 567 pinctrl-names = "default"; 568 pinctrl-0 = <&pinctrl_pwm1>; 569 status = "disabled"; 570}; 571 572&uart1 { 573 pinctrl-names = "default"; 574 pinctrl-0 = <&pinctrl_uart1>; 575 status = "okay"; 576}; 577 578&uart2 { 579 pinctrl-names = "default"; 580 pinctrl-0 = <&pinctrl_uart2>; 581 status = "okay"; 582}; 583 584&usbh1 { 585 pinctrl-names = "default"; 586 pinctrl-0 = <&pinctrl_usbh1>; 587 vbus-supply = <®_usb_h1_vbus>; 588 over-current-active-low; 589 status = "disabled"; 590}; 591 592&usbotg { 593 pinctrl-names = "default"; 594 pinctrl-0 = <&pinctrl_usbotg>; 595 vbus-supply = <®_usb_otg_vbus>; 596 over-current-active-low; 597 srp-disable; 598 hnp-disable; 599 adp-disable; 600 status = "okay"; 601}; 602 603&usbphy1 { 604 fsl,tx-d-cal = <106>; 605 status = "okay"; 606}; 607 608&usbphy2 { 609 fsl,tx-d-cal = <109>; 610 status = "disabled"; 611}; 612 613&usdhc3 { 614 pinctrl-names = "default"; 615 pinctrl-0 = <&pinctrl_usdhc3>; 616 bus-width = <4>; 617 cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; 618 wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; 619 no-1-8-v; 620 keep-power-in-suspend; 621 wakeup-source; 622 vmmc-supply = <&sw2_reg>; 623 status = "disabled"; 624}; 625 626&usdhc4 { 627 pinctrl-names = "default"; 628 pinctrl-0 = <&pinctrl_usdhc4>; 629 bus-width = <8>; 630 non-removable; 631 no-1-8-v; 632 keep-power-in-suspend; 633 vmmc-supply = <&sw2_reg>; 634 status = "okay"; 635}; 636 637&wdog1 { 638 status = "disabled"; 639}; 640 641&wdog2 { 642 pinctrl-names = "default"; 643 pinctrl-0 = <&pinctrl_wdog>; 644 fsl,ext-reset-output; 645 status = "okay"; 646}; 647