1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2018
4 * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
5 */
6
7/dts-v1/;
8
9#include "imx6q.dtsi"
10
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/pwm/pwm.h>
13#include <dt-bindings/sound/fsl-imx-audmux.h>
14
15/ {
16	backlight_lcd: backlight-lcd {
17		compatible = "pwm-backlight";
18		pwms = <&pwm1 0 5000000>;
19		brightness-levels = <0 255>;
20		num-interpolated-steps = <255>;
21		default-brightness-level = <250>;
22	};
23
24	beeper {
25		compatible = "pwm-beeper";
26		pwms = <&pwm2 0 500000>;
27	};
28
29	lcd_display: display {
30		compatible = "fsl,imx-parallel-display";
31		#address-cells = <1>;
32		#size-cells = <0>;
33		interface-pix-fmt = "rgb24";
34		pinctrl-names = "default";
35		pinctrl-0 = <&pinctrl_ipu1>;
36
37		port@0 {
38			reg = <0>;
39
40			lcd_display_in: endpoint {
41				remote-endpoint = <&ipu1_di0_disp0>;
42			};
43		};
44
45		port@1 {
46			reg = <1>;
47
48			lcd_display_out: endpoint {
49				remote-endpoint = <&lcd_panel_in>;
50			};
51		};
52	};
53
54	lcd_panel: lcd-panel {
55		compatible = "auo,g070vvn01";
56		backlight = <&backlight_lcd>;
57		power-supply = <&reg_display>;
58
59		port {
60			lcd_panel_in: endpoint {
61				remote-endpoint = <&lcd_display_out>;
62			};
63		};
64	};
65
66	leds {
67		compatible = "gpio-leds";
68
69		green {
70			label = "led1";
71			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
72			linux,default-trigger = "gpio";
73			default-state = "off";
74		};
75
76		red {
77			label = "led0";
78			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
79			linux,default-trigger = "gpio";
80			default-state = "off";
81		};
82	};
83
84	reg_3p3v: regulator-3p3v {
85		compatible = "regulator-fixed";
86		regulator-name = "3P3V";
87		regulator-min-microvolt = <3300000>;
88		regulator-max-microvolt = <3300000>;
89		regulator-always-on;
90	};
91
92	reg_audio: regulator-audio {
93		compatible = "regulator-fixed";
94		regulator-name = "sgtl5000-supply";
95		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
96		enable-active-high;
97		regulator-always-on;
98	};
99
100	reg_display: regulator-display {
101		compatible = "regulator-fixed";
102		regulator-name = "display-supply";
103		regulator-min-microvolt = <3300000>;
104		regulator-max-microvolt = <3300000>;
105		regulator-always-on;
106	};
107
108	reg_usb_h1_vbus: regulator-usb_h1_vbus {
109		compatible = "regulator-fixed";
110		regulator-name = "usb_h1_vbus";
111		regulator-min-microvolt = <5000000>;
112		regulator-max-microvolt = <5000000>;
113		enable-active-high;
114	};
115
116	sound {
117		compatible = "simple-audio-card";
118		simple-audio-card,name = "imx6q-sgtl5000-audio";
119		simple-audio-card,format = "i2s";
120		simple-audio-card,bitclock-master = <&codec_dai>;
121		simple-audio-card,frame-master = <&codec_dai>;
122
123		cpu_dai: simple-audio-card,cpu {
124			sound-dai = <&ssi1>;
125		};
126
127		codec_dai: simple-audio-card,codec {
128			sound-dai = <&sgtl5000>;
129		};
130	};
131};
132
133&audmux {
134	pinctrl-names = "default";
135	pinctrl-0 = <&pinctrl_audmux>;
136	status = "okay";
137
138	ssi1 {
139		fsl,audmux-port = <0>;
140		fsl,port-config = <
141			(IMX_AUDMUX_V2_PTCR_SYN |
142			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
143			IMX_AUDMUX_V2_PTCR_TCSEL(2) |
144			IMX_AUDMUX_V2_PTCR_TFSDIR |
145			IMX_AUDMUX_V2_PTCR_TCLKDIR)
146			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
147		>;
148	};
149
150	aud3 {
151		fsl,audmux-port = <2>;
152		fsl,port-config = <
153			IMX_AUDMUX_V2_PTCR_SYN
154			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
155		>;
156	};
157};
158
159&can1 {
160	pinctrl-names = "default";
161	pinctrl-0 = <&pinctrl_flexcan1>;
162};
163
164&can2 {
165	pinctrl-names = "default";
166	pinctrl-0 = <&pinctrl_flexcan2>;
167};
168
169&fec {
170	pinctrl-names = "default";
171	pinctrl-0 = <&pinctrl_enet>;
172	phy-mode = "rgmii";
173	fsl,magic-packet;
174	status = "okay";
175};
176
177&i2c1 {
178	clock-frequency = <400000>;
179	pinctrl-names = "default";
180	pinctrl-0 = <&pinctrl_i2c1>;
181	status = "okay";
182
183	touchscreen@5d {
184		compatible = "goodix,gt911";
185		reg = <0x5d>;
186		pinctrl-names = "default";
187		pinctrl-0 = <&pinctrl_ts>;
188		interrupt-parent = <&gpio1>;
189		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
190		irq-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
191		reset-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
192	};
193
194	ds1307: rtc@32 {
195		compatible = "dallas,ds1307";
196		reg = <0x32>;
197	};
198};
199
200&i2c2 {
201	clock-frequency = <400000>;
202	pinctrl-names = "default";
203	pinctrl-0 = <&pinctrl_i2c2>;
204	status = "okay";
205
206	sgtl5000: audio-codec@a {
207		compatible = "fsl,sgtl5000";
208		#sound-dai-cells = <0>;
209		reg = <0x0a>;
210		pinctrl-names = "default";
211		pinctrl-0 = <&pinctrl_codec>;
212		clocks = <&clks IMX6QDL_CLK_CKO>;
213		VDDA-supply = <&reg_3p3v>;
214		VDDIO-supply = <&reg_3p3v>;
215	};
216};
217
218&iomuxc {
219	pinctrl_audmux: audmuxgrp {
220		fsl,pins = <
221			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
222			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
223			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
224			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS	0x130b0
225		>;
226	};
227
228	pinctrl_codec: codecgrp {
229		fsl,pins = <
230			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31   0x1b0b0
231			/* sgtl5000 sys_mclk clock routed to CLKO1 */
232			MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000b0
233		>;
234	};
235
236	pinctrl_enet: enetgrp {
237		fsl,pins = <
238			MX6QDL_PAD_ENET_MDIO__ENET_MDIO	0x1b0b0
239			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
240			MX6QDL_PAD_RGMII_TXC__RGMII_TXC	0x1b0b0
241			MX6QDL_PAD_RGMII_TD0__RGMII_TD0	0x1b0b0
242			MX6QDL_PAD_RGMII_TD1__RGMII_TD1	0x1b0b0
243			MX6QDL_PAD_RGMII_TD2__RGMII_TD2	0x1b0b0
244			MX6QDL_PAD_RGMII_TD3__RGMII_TD3	0x1b0b0
245			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
246			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
247			MX6QDL_PAD_RGMII_RXC__RGMII_RXC	0x1b0b0
248			MX6QDL_PAD_RGMII_RD0__RGMII_RD0	0x1b0b0
249			MX6QDL_PAD_RGMII_RD1__RGMII_RD1	0x1b0b0
250			MX6QDL_PAD_RGMII_RD2__RGMII_RD2	0x1b0b0
251			MX6QDL_PAD_RGMII_RD3__RGMII_RD3	0x1b0b0
252			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
253			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
254		>;
255	};
256
257	pinctrl_flexcan1: can1grp {
258		fsl,pins = <
259			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX        0x1b0b0
260			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX        0x1b0b0
261		>;
262	};
263
264	pinctrl_flexcan2: can2grp {
265		fsl,pins = <
266			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b0b0
267			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b0b0
268		>;
269	};
270
271	pinctrl_i2c1: i2c1grp {
272		fsl,pins = <
273			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
274			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
275		>;
276	};
277
278	pinctrl_i2c2: i2c2grp {
279		fsl,pins = <
280			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
281			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
282		 >;
283	};
284
285	pinctrl_ipu1: ipu1grp {
286		fsl,pins = <
287			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
288			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
289			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
290			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
291			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
292			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
293			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
294			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
295			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
296			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
297			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
298			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
299			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
300			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
301			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
302			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
303			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
304			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
305			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
306			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
307			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
308			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
309			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
310			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
311			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
312			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
313			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
314			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
315		>;
316	};
317
318	pinctrl_pwm1: pwm1grp {
319		fsl,pins = <
320			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
321		>;
322	};
323
324	pinctrl_pwm2: pwm2grp {
325		fsl,pins = <
326			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
327		>;
328	};
329
330	pinctrl_ts: tsgrp {
331		fsl,pins = <
332			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
333			MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
334		>;
335	};
336
337	pinctrl_uart1: uart1grp {
338		fsl,pins = <
339			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
340			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
341		>;
342	};
343
344	pinctrl_uart2: uart2grp {
345		fsl,pins = <
346			MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
347			MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
348			MX6QDL_PAD_EIM_D28__UART2_CTS_B         0x1b0b1
349			MX6QDL_PAD_EIM_D29__UART2_RTS_B         0x1b0b1
350		>;
351	};
352
353	pinctrl_usdhc2: usdhc2grp {
354		fsl,pins = <
355			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
356			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
357			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
358			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
359			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
360			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
361		>;
362	};
363
364	pinctrl_usdhc4: usdhc4grp {
365		fsl,pins = <
366			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
367			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
368			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
369			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
370			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
371			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
372			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
373			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
374			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
375			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
376		>;
377	};
378};
379
380&pwm1 {
381	#pwm-cells = <2>;
382	pinctrl-names = "default";
383	pinctrl-0 = <&pinctrl_pwm1>;
384	status = "okay";
385};
386
387&pwm2 {
388	#pwm-cells = <2>;
389	pinctrl-names = "default";
390	pinctrl-0 = <&pinctrl_pwm2>;
391	status = "okay";
392};
393
394&ssi1 {
395	status = "okay";
396};
397
398&uart1 {
399	pinctrl-names = "default";
400	pinctrl-0 = <&pinctrl_uart1>;
401	status = "okay";
402};
403
404&uart2 {
405	pinctrl-names = "default";
406	pinctrl-0 = <&pinctrl_uart2>;
407	uart-has-rtscts;
408};
409
410&usbh1 {
411	status = "okay";
412};
413
414&usdhc2 {
415	pinctrl-names = "default";
416	pinctrl-0 = <&pinctrl_usdhc2>;
417	bus-width = <4>;
418	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
419	status = "okay";
420};
421
422&usdhc4 {
423	pinctrl-names = "default";
424	pinctrl-0 = <&pinctrl_usdhc4>;
425	bus-width = <8>;
426	non-removable;
427	no-1-8-v;
428	keep-power-in-suspend;
429	status = "okay";
430};
431
432&wdog1 {
433	status = "okay";
434};
435