1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Common Device Tree Source for IGEP COM MODULE
4 *
5 * Copyright (C) 2014 Javier Martinez Canillas <javier@dowhile0.org>
6 * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
7 */
8
9#include "omap3-igep.dtsi"
10
11/ {
12	leds: gpio_leds {
13		compatible = "gpio-leds";
14
15		user0 {
16			 label = "omap3:red:user0";
17			 gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
18			 default-state = "off";
19		};
20
21		user1 {
22			 label = "omap3:green:user1";
23			 gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;	/* LEDB */
24			 default-state = "off";
25		};
26
27		user2 {
28			 label = "omap3:red:user1";
29			 gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;		/* gpio_16 */
30			 default-state = "off";
31		};
32	};
33
34	hsusb2_phy: hsusb2_phy {
35		compatible = "usb-nop-xceiv";
36		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;		/* gpio_54 */
37		#phy-cells = <0>;
38	};
39};
40
41&omap3_pmx_core {
42	pinctrl-names = "default";
43	pinctrl-0 = <&hsusb2_pins>;
44
45	hsusb2_pins: pinmux_hsusb2_pins {
46		pinctrl-single,pins = <
47			OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi1_cs3.hsusb2_data2 */
48			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_clk.hsusb2_data7 */
49			OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_simo.hsusb2_data4 */
50			OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_somi.hsusb2_data5 */
51			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs0.hsusb2_data6 */
52			OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* mcspi2_cs1.hsusb2_data3 */
53		>;
54	};
55
56	uart2_pins: pinmux_uart2_pins {
57		pinctrl-single,pins = <
58			OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1)	/* mcbsp3_dx.uart2_cts */
59			OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_dr.uart2_rts */
60			OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1)	/* mcbsp3_clk.uart2_tx */
61			OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1)	/* mcbsp3_fsx.uart2_rx */
62		>;
63	};
64};
65
66&omap3_pmx_core2 {
67	pinctrl-names = "default";
68	pinctrl-0 = <&hsusb2_core2_pins>;
69
70	hsusb2_core2_pins: pinmux_hsusb2_core2_pins {
71		pinctrl-single,pins = <
72			OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3)		      /* etk_d10.hsusb2_clk */
73			OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3)		      /* etk_d11.hsusb2_stp */
74			OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d12.hsusb2_dir */
75			OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d13.hsusb2_nxt */
76			OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d14.hsusb2_data0 */
77			OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d15.hsusb2_data1 */
78		>;
79	};
80
81	leds_core2_pins: pinmux_leds_core2_pins {
82		pinctrl-single,pins = <
83			OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4)	/* etk_d2.gpio_16 */
84		>;
85	};
86};
87
88&usbhshost {
89	port2-mode = "ehci-phy";
90};
91
92&usbhsehci {
93	phys = <0 &hsusb2_phy>;
94};
95
96&uart2 {
97	pinctrl-names = "default";
98	pinctrl-0 = <&uart2_pins>;
99};
100
101&gpmc {
102	ranges = <0 0 0x30000000 0x01000000>;   /* CS0: 16MB for NAND */
103};
104