1// SPDX-License-Identifier: GPL-2.0 2/* 3 * Device Tree Source for the Koelsch board 4 * 5 * Copyright (C) 2013 Renesas Electronics Corporation 6 * Copyright (C) 2013-2014 Renesas Solutions Corp. 7 * Copyright (C) 2014 Cogent Embedded, Inc. 8 */ 9 10/* 11 * SSI-AK4643 12 * 13 * SW1: 1: AK4643 14 * 2: CN22 15 * 3: ADV7511 16 * 17 * This command is required when Playback/Capture 18 * 19 * amixer set "LINEOUT Mixer DACL" on 20 * amixer set "DVC Out" 100% 21 * amixer set "DVC In" 100% 22 * 23 * You can use Mute 24 * 25 * amixer set "DVC Out Mute" on 26 * amixer set "DVC In Mute" on 27 * 28 * You can use Volume Ramp 29 * 30 * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" 31 * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" 32 * amixer set "DVC Out Ramp" on 33 * aplay xxx.wav & 34 * amixer set "DVC Out" 80% // Volume Down 35 * amixer set "DVC Out" 100% // Volume Up 36 */ 37 38/dts-v1/; 39#include "r8a7791.dtsi" 40#include <dt-bindings/gpio/gpio.h> 41#include <dt-bindings/input/input.h> 42 43/ { 44 model = "Koelsch"; 45 compatible = "renesas,koelsch", "renesas,r8a7791"; 46 47 aliases { 48 serial0 = &scif0; 49 serial1 = &scif1; 50 i2c9 = &gpioi2c1; 51 i2c10 = &gpioi2c2; 52 i2c11 = &gpioi2c4; 53 i2c12 = &i2cexio1; 54 i2c13 = &i2chdmi; 55 i2c14 = &i2cexio4; 56 mmc0 = &sdhi0; 57 mmc1 = &sdhi1; 58 mmc2 = &sdhi2; 59 }; 60 61 chosen { 62 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; 63 stdout-path = "serial0:115200n8"; 64 }; 65 66 memory@40000000 { 67 device_type = "memory"; 68 reg = <0 0x40000000 0 0x40000000>; 69 }; 70 71 memory@200000000 { 72 device_type = "memory"; 73 reg = <2 0x00000000 0 0x40000000>; 74 }; 75 76 lbsc { 77 #address-cells = <1>; 78 #size-cells = <1>; 79 }; 80 81 keyboard { 82 compatible = "gpio-keys"; 83 84 pinctrl-0 = <&sw2_pins>; 85 pinctrl-names = "default"; 86 87 key-1 { 88 gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; 89 linux,code = <KEY_1>; 90 label = "SW2-1"; 91 wakeup-source; 92 debounce-interval = <20>; 93 }; 94 key-2 { 95 gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; 96 linux,code = <KEY_2>; 97 label = "SW2-2"; 98 wakeup-source; 99 debounce-interval = <20>; 100 }; 101 key-3 { 102 gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; 103 linux,code = <KEY_3>; 104 label = "SW2-3"; 105 wakeup-source; 106 debounce-interval = <20>; 107 }; 108 key-4 { 109 gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; 110 linux,code = <KEY_4>; 111 label = "SW2-4"; 112 wakeup-source; 113 debounce-interval = <20>; 114 }; 115 key-a { 116 gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; 117 linux,code = <KEY_A>; 118 label = "SW30"; 119 wakeup-source; 120 debounce-interval = <20>; 121 }; 122 key-b { 123 gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; 124 linux,code = <KEY_B>; 125 label = "SW31"; 126 wakeup-source; 127 debounce-interval = <20>; 128 }; 129 key-c { 130 gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; 131 linux,code = <KEY_C>; 132 label = "SW32"; 133 wakeup-source; 134 debounce-interval = <20>; 135 }; 136 key-d { 137 gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; 138 linux,code = <KEY_D>; 139 label = "SW33"; 140 wakeup-source; 141 debounce-interval = <20>; 142 }; 143 key-e { 144 gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; 145 linux,code = <KEY_E>; 146 label = "SW34"; 147 wakeup-source; 148 debounce-interval = <20>; 149 }; 150 key-f { 151 gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; 152 linux,code = <KEY_F>; 153 label = "SW35"; 154 wakeup-source; 155 debounce-interval = <20>; 156 }; 157 key-g { 158 gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; 159 linux,code = <KEY_G>; 160 label = "SW36"; 161 wakeup-source; 162 debounce-interval = <20>; 163 }; 164 }; 165 166 leds { 167 compatible = "gpio-leds"; 168 led6 { 169 gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; 170 label = "LED6"; 171 }; 172 led7 { 173 gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; 174 label = "LED7"; 175 }; 176 led8 { 177 gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; 178 label = "LED8"; 179 }; 180 }; 181 182 vcc_sdhi0: regulator-vcc-sdhi0 { 183 compatible = "regulator-fixed"; 184 185 regulator-name = "SDHI0 Vcc"; 186 regulator-min-microvolt = <3300000>; 187 regulator-max-microvolt = <3300000>; 188 189 gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>; 190 enable-active-high; 191 }; 192 193 vccq_sdhi0: regulator-vccq-sdhi0 { 194 compatible = "regulator-gpio"; 195 196 regulator-name = "SDHI0 VccQ"; 197 regulator-min-microvolt = <1800000>; 198 regulator-max-microvolt = <3300000>; 199 200 gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; 201 gpios-states = <1>; 202 states = <3300000 1>, <1800000 0>; 203 }; 204 205 vcc_sdhi1: regulator-vcc-sdhi1 { 206 compatible = "regulator-fixed"; 207 208 regulator-name = "SDHI1 Vcc"; 209 regulator-min-microvolt = <3300000>; 210 regulator-max-microvolt = <3300000>; 211 212 gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>; 213 enable-active-high; 214 }; 215 216 vccq_sdhi1: regulator-vccq-sdhi1 { 217 compatible = "regulator-gpio"; 218 219 regulator-name = "SDHI1 VccQ"; 220 regulator-min-microvolt = <1800000>; 221 regulator-max-microvolt = <3300000>; 222 223 gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; 224 gpios-states = <1>; 225 states = <3300000 1>, <1800000 0>; 226 }; 227 228 vcc_sdhi2: regulator-vcc-sdhi2 { 229 compatible = "regulator-fixed"; 230 231 regulator-name = "SDHI2 Vcc"; 232 regulator-min-microvolt = <3300000>; 233 regulator-max-microvolt = <3300000>; 234 235 gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>; 236 enable-active-high; 237 }; 238 239 vccq_sdhi2: regulator-vccq-sdhi2 { 240 compatible = "regulator-gpio"; 241 242 regulator-name = "SDHI2 VccQ"; 243 regulator-min-microvolt = <1800000>; 244 regulator-max-microvolt = <3300000>; 245 246 gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; 247 gpios-states = <1>; 248 states = <3300000 1>, <1800000 0>; 249 }; 250 251 audio_clock: audio_clock { 252 compatible = "fixed-clock"; 253 #clock-cells = <0>; 254 clock-frequency = <11289600>; 255 }; 256 257 rsnd_ak4643: sound { 258 compatible = "simple-audio-card"; 259 260 simple-audio-card,format = "left_j"; 261 simple-audio-card,bitclock-master = <&sndcodec>; 262 simple-audio-card,frame-master = <&sndcodec>; 263 264 sndcpu: simple-audio-card,cpu { 265 sound-dai = <&rcar_sound>; 266 }; 267 268 sndcodec: simple-audio-card,codec { 269 sound-dai = <&ak4643>; 270 clocks = <&audio_clock>; 271 }; 272 }; 273 274 hdmi-in { 275 compatible = "hdmi-connector"; 276 type = "a"; 277 278 port { 279 hdmi_con_in: endpoint { 280 remote-endpoint = <&adv7612_in>; 281 }; 282 }; 283 }; 284 285 cec_clock: cec-clock { 286 compatible = "fixed-clock"; 287 #clock-cells = <0>; 288 clock-frequency = <12000000>; 289 }; 290 291 hdmi-out { 292 compatible = "hdmi-connector"; 293 type = "a"; 294 295 port { 296 hdmi_con_out: endpoint { 297 remote-endpoint = <&adv7511_out>; 298 }; 299 }; 300 }; 301 302 x2_clk: x2-clock { 303 compatible = "fixed-clock"; 304 #clock-cells = <0>; 305 clock-frequency = <74250000>; 306 }; 307 308 x13_clk: x13-clock { 309 compatible = "fixed-clock"; 310 #clock-cells = <0>; 311 clock-frequency = <148500000>; 312 }; 313 314 gpioi2c1: i2c-9 { 315 #address-cells = <1>; 316 #size-cells = <0>; 317 compatible = "i2c-gpio"; 318 status = "disabled"; 319 scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 320 sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 321 i2c-gpio,delay-us = <5>; 322 }; 323 324 gpioi2c2: i2c-10 { 325 #address-cells = <1>; 326 #size-cells = <0>; 327 compatible = "i2c-gpio"; 328 status = "disabled"; 329 scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 330 sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 331 i2c-gpio,delay-us = <5>; 332 }; 333 334 gpioi2c4: i2c-11 { 335 #address-cells = <1>; 336 #size-cells = <0>; 337 compatible = "i2c-gpio"; 338 status = "disabled"; 339 scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 340 sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 341 i2c-gpio,delay-us = <5>; 342 }; 343 344 /* 345 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA). 346 * A fallback to GPIO is provided. 347 */ 348 i2cexio1: i2c-12 { 349 compatible = "i2c-demux-pinctrl"; 350 i2c-parent = <&i2c1>, <&gpioi2c1>; 351 i2c-bus-name = "i2c-exio1"; 352 #address-cells = <1>; 353 #size-cells = <0>; 354 }; 355 356 /* 357 * A fallback to GPIO is provided for I2C2. 358 */ 359 i2chdmi: i2c-13 { 360 compatible = "i2c-demux-pinctrl"; 361 i2c-parent = <&i2c2>, <&gpioi2c2>; 362 i2c-bus-name = "i2c-hdmi"; 363 #address-cells = <1>; 364 #size-cells = <0>; 365 366 ak4643: codec@12 { 367 compatible = "asahi-kasei,ak4643"; 368 #sound-dai-cells = <0>; 369 reg = <0x12>; 370 }; 371 372 composite-in@20 { 373 compatible = "adi,adv7180"; 374 reg = <0x20>; 375 376 port { 377 adv7180: endpoint { 378 bus-width = <8>; 379 remote-endpoint = <&vin1ep>; 380 }; 381 }; 382 }; 383 384 hdmi@39 { 385 compatible = "adi,adv7511w"; 386 reg = <0x39>; 387 interrupt-parent = <&gpio3>; 388 interrupts = <29 IRQ_TYPE_LEVEL_LOW>; 389 clocks = <&cec_clock>; 390 clock-names = "cec"; 391 392 adi,input-depth = <8>; 393 adi,input-colorspace = "rgb"; 394 adi,input-clock = "1x"; 395 396 ports { 397 #address-cells = <1>; 398 #size-cells = <0>; 399 400 port@0 { 401 reg = <0>; 402 adv7511_in: endpoint { 403 remote-endpoint = <&du_out_rgb>; 404 }; 405 }; 406 407 port@1 { 408 reg = <1>; 409 adv7511_out: endpoint { 410 remote-endpoint = <&hdmi_con_out>; 411 }; 412 }; 413 }; 414 }; 415 416 hdmi-in@4c { 417 compatible = "adi,adv7612"; 418 reg = <0x4c>; 419 interrupt-parent = <&gpio4>; 420 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 421 default-input = <0>; 422 423 ports { 424 #address-cells = <1>; 425 #size-cells = <0>; 426 427 port@0 { 428 reg = <0>; 429 adv7612_in: endpoint { 430 remote-endpoint = <&hdmi_con_in>; 431 }; 432 }; 433 434 port@2 { 435 reg = <2>; 436 adv7612_out: endpoint { 437 remote-endpoint = <&vin0ep2>; 438 }; 439 }; 440 }; 441 }; 442 443 eeprom@50 { 444 compatible = "renesas,r1ex24002", "atmel,24c02"; 445 reg = <0x50>; 446 pagesize = <16>; 447 }; 448 }; 449 450 /* 451 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA). 452 * A fallback to GPIO is provided. 453 */ 454 i2cexio4: i2c-14 { 455 compatible = "i2c-demux-pinctrl"; 456 i2c-parent = <&i2c4>, <&gpioi2c4>; 457 i2c-bus-name = "i2c-exio4"; 458 #address-cells = <1>; 459 #size-cells = <0>; 460 }; 461}; 462 463&du { 464 pinctrl-0 = <&du_pins>; 465 pinctrl-names = "default"; 466 status = "okay"; 467 468 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, 469 <&x13_clk>, <&x2_clk>; 470 clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; 471 472 ports { 473 port@0 { 474 endpoint { 475 remote-endpoint = <&adv7511_in>; 476 }; 477 }; 478 }; 479}; 480 481&lvds0 { 482 ports { 483 port@1 { 484 lvds_connector: endpoint { 485 }; 486 }; 487 }; 488}; 489 490&extal_clk { 491 clock-frequency = <20000000>; 492}; 493 494&pfc { 495 pinctrl-0 = <&scif_clk_pins>; 496 pinctrl-names = "default"; 497 498 i2c1_pins: i2c1 { 499 groups = "i2c1"; 500 function = "i2c1"; 501 }; 502 503 i2c2_pins: i2c2 { 504 groups = "i2c2"; 505 function = "i2c2"; 506 }; 507 508 i2c4_pins: i2c4 { 509 groups = "i2c4_c"; 510 function = "i2c4"; 511 }; 512 513 du_pins: du { 514 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; 515 function = "du"; 516 }; 517 518 scif0_pins: scif0 { 519 groups = "scif0_data_d"; 520 function = "scif0"; 521 }; 522 523 scif1_pins: scif1 { 524 groups = "scif1_data_d"; 525 function = "scif1"; 526 }; 527 528 scif_clk_pins: scif_clk { 529 groups = "scif_clk"; 530 function = "scif_clk"; 531 }; 532 533 ether_pins: ether { 534 groups = "eth_link", "eth_mdio", "eth_rmii"; 535 function = "eth"; 536 }; 537 538 phy1_pins: phy1 { 539 groups = "intc_irq0"; 540 function = "intc"; 541 }; 542 543 pmic_irq_pins: pmicirq { 544 groups = "intc_irq2"; 545 function = "intc"; 546 }; 547 548 sdhi0_pins: sd0 { 549 groups = "sdhi0_data4", "sdhi0_ctrl"; 550 function = "sdhi0"; 551 power-source = <3300>; 552 }; 553 554 sdhi0_pins_uhs: sd0_uhs { 555 groups = "sdhi0_data4", "sdhi0_ctrl"; 556 function = "sdhi0"; 557 power-source = <1800>; 558 }; 559 560 sdhi1_pins: sd1 { 561 groups = "sdhi1_data4", "sdhi1_ctrl"; 562 function = "sdhi1"; 563 power-source = <3300>; 564 }; 565 566 sdhi1_pins_uhs: sd1_uhs { 567 groups = "sdhi1_data4", "sdhi1_ctrl"; 568 function = "sdhi1"; 569 power-source = <1800>; 570 }; 571 572 sdhi2_pins: sd2 { 573 groups = "sdhi2_data4", "sdhi2_ctrl"; 574 function = "sdhi2"; 575 power-source = <3300>; 576 }; 577 578 sdhi2_pins_uhs: sd2_uhs { 579 groups = "sdhi2_data4", "sdhi2_ctrl"; 580 function = "sdhi2"; 581 power-source = <1800>; 582 }; 583 584 qspi_pins: qspi { 585 groups = "qspi_ctrl", "qspi_data4"; 586 function = "qspi"; 587 }; 588 589 msiof0_pins: msiof0 { 590 groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", 591 "msiof0_tx"; 592 function = "msiof0"; 593 }; 594 595 usb0_pins: usb0 { 596 groups = "usb0"; 597 function = "usb0"; 598 }; 599 600 usb1_pins: usb1 { 601 groups = "usb1"; 602 function = "usb1"; 603 }; 604 605 vin0_pins: vin0 { 606 groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; 607 function = "vin0"; 608 }; 609 610 vin1_pins: vin1 { 611 groups = "vin1_data8", "vin1_clk"; 612 function = "vin1"; 613 }; 614 615 sound_pins: sound { 616 groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; 617 function = "ssi"; 618 }; 619 620 sound_clk_pins: sound_clk { 621 groups = "audio_clk_a"; 622 function = "audio_clk"; 623 }; 624 625 sw2_pins: sw2 { 626 pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3"; 627 bias-pull-up; 628 }; 629}; 630 631ðer { 632 pinctrl-0 = <ðer_pins>, <&phy1_pins>; 633 pinctrl-names = "default"; 634 635 phy-handle = <&phy1>; 636 renesas,ether-link-active-low; 637 status = "okay"; 638 639 phy1: ethernet-phy@1 { 640 reg = <1>; 641 interrupt-parent = <&irqc0>; 642 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 643 micrel,led-mode = <1>; 644 reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; 645 }; 646}; 647 648&cmt0 { 649 status = "okay"; 650}; 651 652&rwdt { 653 timeout-sec = <60>; 654 status = "okay"; 655}; 656 657&sata0 { 658 status = "okay"; 659}; 660 661&scif0 { 662 pinctrl-0 = <&scif0_pins>; 663 pinctrl-names = "default"; 664 665 status = "okay"; 666}; 667 668&scif1 { 669 pinctrl-0 = <&scif1_pins>; 670 pinctrl-names = "default"; 671 672 status = "okay"; 673}; 674 675&scif_clk { 676 clock-frequency = <14745600>; 677}; 678 679&sdhi0 { 680 pinctrl-0 = <&sdhi0_pins>; 681 pinctrl-1 = <&sdhi0_pins_uhs>; 682 pinctrl-names = "default", "state_uhs"; 683 684 vmmc-supply = <&vcc_sdhi0>; 685 vqmmc-supply = <&vccq_sdhi0>; 686 cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; 687 wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; 688 sd-uhs-sdr50; 689 sd-uhs-sdr104; 690 status = "okay"; 691}; 692 693&sdhi1 { 694 pinctrl-0 = <&sdhi1_pins>; 695 pinctrl-1 = <&sdhi1_pins_uhs>; 696 pinctrl-names = "default", "state_uhs"; 697 698 vmmc-supply = <&vcc_sdhi1>; 699 vqmmc-supply = <&vccq_sdhi1>; 700 cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; 701 wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; 702 sd-uhs-sdr50; 703 status = "okay"; 704}; 705 706&sdhi2 { 707 pinctrl-0 = <&sdhi2_pins>; 708 pinctrl-1 = <&sdhi2_pins_uhs>; 709 pinctrl-names = "default", "state_uhs"; 710 711 vmmc-supply = <&vcc_sdhi2>; 712 vqmmc-supply = <&vccq_sdhi2>; 713 cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; 714 sd-uhs-sdr50; 715 status = "okay"; 716}; 717 718&qspi { 719 pinctrl-0 = <&qspi_pins>; 720 pinctrl-names = "default"; 721 722 status = "okay"; 723 724 flash: flash@0 { 725 compatible = "spansion,s25fl512s", "jedec,spi-nor"; 726 reg = <0>; 727 spi-max-frequency = <30000000>; 728 spi-tx-bus-width = <4>; 729 spi-rx-bus-width = <4>; 730 spi-cpha; 731 spi-cpol; 732 m25p,fast-read; 733 734 partitions { 735 compatible = "fixed-partitions"; 736 #address-cells = <1>; 737 #size-cells = <1>; 738 739 partition@0 { 740 label = "loader"; 741 reg = <0x00000000 0x00080000>; 742 read-only; 743 }; 744 partition@80000 { 745 label = "user"; 746 reg = <0x00080000 0x00580000>; 747 read-only; 748 }; 749 partition@600000 { 750 label = "flash"; 751 reg = <0x00600000 0x03a00000>; 752 }; 753 }; 754 }; 755}; 756 757&msiof0 { 758 pinctrl-0 = <&msiof0_pins>; 759 pinctrl-names = "default"; 760 761 status = "okay"; 762 763 pmic: pmic@0 { 764 compatible = "renesas,r2a11302ft"; 765 reg = <0>; 766 spi-max-frequency = <6000000>; 767 spi-cpol; 768 spi-cpha; 769 }; 770}; 771 772&i2c1 { 773 pinctrl-0 = <&i2c1_pins>; 774 pinctrl-names = "i2c-exio1"; 775}; 776 777&i2c2 { 778 pinctrl-0 = <&i2c2_pins>; 779 pinctrl-names = "i2c-hdmi"; 780 781 clock-frequency = <100000>; 782}; 783 784&i2c4 { 785 pinctrl-0 = <&i2c4_pins>; 786 pinctrl-names = "i2c-exio4"; 787}; 788 789&i2c6 { 790 pinctrl-names = "default"; 791 pinctrl-0 = <&pmic_irq_pins>; 792 status = "okay"; 793 clock-frequency = <100000>; 794 795 pmic@58 { 796 compatible = "dlg,da9063"; 797 reg = <0x58>; 798 interrupt-parent = <&irqc0>; 799 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 800 interrupt-controller; 801 802 rtc { 803 compatible = "dlg,da9063-rtc"; 804 }; 805 806 wdt { 807 compatible = "dlg,da9063-watchdog"; 808 }; 809 }; 810 811 vdd_dvfs: regulator@68 { 812 compatible = "dlg,da9210"; 813 reg = <0x68>; 814 interrupt-parent = <&irqc0>; 815 interrupts = <2 IRQ_TYPE_LEVEL_LOW>; 816 817 regulator-min-microvolt = <1000000>; 818 regulator-max-microvolt = <1000000>; 819 regulator-boot-on; 820 regulator-always-on; 821 }; 822}; 823 824&pci0 { 825 status = "okay"; 826 pinctrl-0 = <&usb0_pins>; 827 pinctrl-names = "default"; 828}; 829 830&pci1 { 831 status = "okay"; 832 pinctrl-0 = <&usb1_pins>; 833 pinctrl-names = "default"; 834}; 835 836&hsusb { 837 status = "okay"; 838 pinctrl-0 = <&usb0_pins>; 839 pinctrl-names = "default"; 840 renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>; 841}; 842 843&usbphy { 844 status = "okay"; 845}; 846 847&pcie_bus_clk { 848 clock-frequency = <100000000>; 849}; 850 851&pciec { 852 status = "okay"; 853}; 854 855&cpu0 { 856 cpu0-supply = <&vdd_dvfs>; 857}; 858 859/* HDMI video input */ 860&vin0 { 861 status = "okay"; 862 pinctrl-0 = <&vin0_pins>; 863 pinctrl-names = "default"; 864 865 port { 866 vin0ep2: endpoint { 867 remote-endpoint = <&adv7612_out>; 868 bus-width = <24>; 869 hsync-active = <0>; 870 vsync-active = <0>; 871 pclk-sample = <1>; 872 data-active = <1>; 873 }; 874 }; 875}; 876 877/* composite video input */ 878&vin1 { 879 status = "okay"; 880 pinctrl-0 = <&vin1_pins>; 881 pinctrl-names = "default"; 882 883 port { 884 vin1ep: endpoint { 885 remote-endpoint = <&adv7180>; 886 bus-width = <8>; 887 }; 888 }; 889}; 890 891&rcar_sound { 892 pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; 893 pinctrl-names = "default"; 894 895 /* Single DAI */ 896 #sound-dai-cells = <0>; 897 898 status = "okay"; 899 900 rcar_sound,dai { 901 dai0 { 902 playback = <&ssi0>, <&src2>, <&dvc0>; 903 capture = <&ssi1>, <&src3>, <&dvc1>; 904 }; 905 }; 906}; 907 908&ssi1 { 909 shared-pin; 910}; 911