1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2
3#include <dt-bindings/pwm/pwm.h>
4#include "rk3288.dtsi"
5
6/ {
7	memory@0 {
8		reg = <0x0 0x0 0x0 0x80000000>;
9		device_type = "memory";
10	};
11
12	emmc_pwrseq: emmc-pwrseq {
13		compatible = "mmc-pwrseq-emmc";
14		pinctrl-0 = <&emmc_reset>;
15		pinctrl-names = "default";
16		reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
17	};
18
19	ext_gmac: external-gmac-clock {
20		compatible = "fixed-clock";
21		#clock-cells = <0>;
22		clock-frequency = <125000000>;
23		clock-output-names = "ext_gmac";
24	};
25
26	vcc_flash: flash-regulator {
27		compatible = "regulator-fixed";
28		regulator-name = "vcc_flash";
29		regulator-min-microvolt = <1800000>;
30		regulator-max-microvolt = <1800000>;
31		startup-delay-us = <150>;
32		vin-supply = <&vcc_io>;
33	};
34
35	vcc_sys: vsys-regulator {
36		compatible = "regulator-fixed";
37		regulator-name = "vcc_sys";
38		regulator-min-microvolt = <5000000>;
39		regulator-max-microvolt = <5000000>;
40		regulator-always-on;
41		regulator-boot-on;
42	};
43};
44
45&cpu0 {
46	cpu0-supply = <&vdd_cpu>;
47};
48
49&emmc {
50	bus-width = <8>;
51	cap-mmc-highspeed;
52	disable-wp;
53	non-removable;
54	mmc-pwrseq = <&emmc_pwrseq>;
55	pinctrl-names = "default";
56	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
57	vmmc-supply = <&vcc_io>;
58	vqmmc-supply = <&vcc_flash>;
59	status = "okay";
60};
61
62&gmac {
63	assigned-clocks = <&cru SCLK_MAC>;
64	assigned-clock-parents = <&ext_gmac>;
65	clock_in_out = "input";
66	phy-mode = "rgmii";
67	phy-supply = <&vccio_pmu>;
68	pinctrl-names = "default";
69	pinctrl-0 = <&rgmii_pins &phy_rst>;
70	snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
71	snps,reset-active-low;
72	snps,reset-delays-us = <0 10000 30000>;
73	rx_delay = <0x10>;
74	tx_delay = <0x30>;
75};
76
77&gpu {
78	mali-supply = <&vdd_gpu>;
79	status = "okay";
80};
81
82&i2c0 {
83	status = "okay";
84
85	act8846: act8846@5a {
86		compatible = "active-semi,act8846";
87		reg = <0x5a>;
88		system-power-controller;
89		inl1-supply = <&vcc_io>;
90		inl2-supply = <&vcc_sys>;
91		inl3-supply = <&vcc_20>;
92		vp1-supply = <&vcc_sys>;
93		vp2-supply = <&vcc_sys>;
94		vp3-supply = <&vcc_sys>;
95		vp4-supply = <&vcc_sys>;
96
97		regulators {
98			vcc_ddr: REG1 {
99				regulator-name = "VCC_DDR";
100				regulator-min-microvolt = <1200000>;
101				regulator-max-microvolt = <1200000>;
102				regulator-always-on;
103			};
104
105			vcc_io: vccio_codec: REG2 {
106				regulator-name = "VCC_IO";
107				regulator-min-microvolt = <3300000>;
108				regulator-max-microvolt = <3300000>;
109				regulator-always-on;
110			};
111
112			vdd_log: REG3 {
113				regulator-name = "VDD_LOG";
114				regulator-min-microvolt = <1000000>;
115				regulator-max-microvolt = <1000000>;
116				regulator-always-on;
117			};
118
119			vcc_20: REG4 {
120				regulator-name = "VCC_20";
121				regulator-min-microvolt = <2000000>;
122				regulator-max-microvolt = <2000000>;
123				regulator-always-on;
124			};
125
126			vccio_sd: REG5 {
127				regulator-name = "VCCIO_SD";
128				regulator-min-microvolt = <3300000>;
129				regulator-max-microvolt = <3300000>;
130				regulator-always-on;
131			};
132
133			vdd10_lcd: REG6 {
134				regulator-name = "VDD10_LCD";
135				regulator-min-microvolt = <1000000>;
136				regulator-max-microvolt = <1000000>;
137				regulator-always-on;
138			};
139
140			vcca_codec: REG7 {
141				regulator-name = "VCCA_CODEC";
142				regulator-min-microvolt = <3300000>;
143				regulator-max-microvolt = <3300000>;
144				regulator-always-on;
145			};
146
147			vcca_tp: REG8 {
148				regulator-name = "VCCA_TP";
149				regulator-min-microvolt = <3300000>;
150				regulator-max-microvolt = <3300000>;
151				regulator-always-on;
152			};
153
154			vccio_pmu: REG9 {
155				regulator-name = "VCCIO_PMU";
156				regulator-min-microvolt = <3300000>;
157				regulator-max-microvolt = <3300000>;
158				regulator-always-on;
159			};
160
161			vdd_10: REG10 {
162				regulator-name = "VDD_10";
163				regulator-min-microvolt = <1000000>;
164				regulator-max-microvolt = <1000000>;
165				regulator-always-on;
166			};
167
168			vcc_18: REG11 {
169				regulator-name = "VCC_18";
170				regulator-min-microvolt = <1800000>;
171				regulator-max-microvolt = <1800000>;
172				regulator-always-on;
173			};
174
175			vcc18_lcd: REG12 {
176				regulator-name = "VCC18_LCD";
177				regulator-min-microvolt = <1800000>;
178				regulator-max-microvolt = <1800000>;
179				regulator-always-on;
180			};
181		};
182	};
183
184	vdd_cpu: syr827@40 {
185		compatible = "silergy,syr827";
186		reg = <0x40>;
187		fcs,suspend-voltage-selector = <1>;
188		regulator-always-on;
189		regulator-boot-on;
190		regulator-enable-ramp-delay = <300>;
191		regulator-name = "vdd_cpu";
192		regulator-min-microvolt = <850000>;
193		regulator-max-microvolt = <1350000>;
194		regulator-ramp-delay = <8000>;
195		vin-supply = <&vcc_sys>;
196	};
197
198	vdd_gpu: syr828@41 {
199		compatible = "silergy,syr828";
200		reg = <0x41>;
201		fcs,suspend-voltage-selector = <1>;
202		regulator-always-on;
203		regulator-enable-ramp-delay = <300>;
204		regulator-min-microvolt = <850000>;
205		regulator-max-microvolt = <1350000>;
206		regulator-name = "vdd_gpu";
207		regulator-ramp-delay = <8000>;
208		vin-supply = <&vcc_sys>;
209	};
210};
211
212&io_domains {
213	status = "okay";
214
215	audio-supply = <&vcc_io>;
216	bb-supply = <&vcc_io>;
217	dvp-supply = <&vcc_18>;
218	flash0-supply = <&vcc_flash>;
219	flash1-supply = <&vccio_pmu>;
220	gpio30-supply = <&vccio_pmu>;
221	gpio1830 = <&vcc_io>;
222	lcdc-supply = <&vcc_io>;
223	sdcard-supply = <&vccio_sd>;
224	wifi-supply = <&vcc_18>;
225};
226
227&pinctrl {
228	pcfg_output_high: pcfg-output-high {
229		output-high;
230	};
231
232	emmc {
233		emmc_reset: emmc-reset {
234			rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
235		};
236	};
237
238	gmac {
239		phy_rst: phy-rst {
240			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
241		};
242	};
243};
244
245&saradc {
246	vref-supply = <&vcc_18>;
247};
248
249&tsadc {
250	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
251	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
252	status = "okay";
253};
254
255&vopb {
256	status = "okay";
257};
258
259&vopb_mmu {
260	status = "okay";
261};
262
263&vopl {
264	status = "okay";
265};
266
267&vopl_mmu {
268	status = "okay";
269};
270
271&wdt {
272	status = "okay";
273};
274