1/*
2 * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 *     You should have received a copy of the GNU General Public
20 *     License along with this file; if not, write to the Free
21 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 *     MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 *  b) Permission is hereby granted, free of charge, to any person
27 *     obtaining a copy of this software and associated documentation
28 *     files (the "Software"), to deal in the Software without
29 *     restriction, including without limitation the rights to use,
30 *     copy, modify, merge, publish, distribute, sublicense, and/or
31 *     sell copies of the Software, and to permit persons to whom the
32 *     Software is furnished to do so, subject to the following
33 *     conditions:
34 *
35 *     The above copyright notice and this permission notice shall be
36 *     included in all copies or substantial portions of the Software.
37 *
38 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 *     OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48/dts-v1/;
49#include "stm32f429.dtsi"
50#include "stm32f429-pinctrl.dtsi"
51#include <dt-bindings/input/input.h>
52#include <dt-bindings/gpio/gpio.h>
53
54/ {
55	model = "STMicroelectronics STM32429i-EVAL board";
56	compatible = "st,stm32429i-eval", "st,stm32f429";
57
58	chosen {
59		bootargs = "root=/dev/ram";
60		stdout-path = "serial0:115200n8";
61	};
62
63	memory@00000000 {
64		device_type = "memory";
65		reg = <0x00000000 0x2000000>;
66	};
67
68	aliases {
69		serial0 = &usart1;
70	};
71
72	clocks {
73		clk_ext_camera: clk-ext-camera {
74			#clock-cells = <0>;
75			compatible = "fixed-clock";
76			clock-frequency = <24000000>;
77		};
78	};
79
80	soc {
81		dma-ranges = <0xc0000000 0x0 0x10000000>;
82	};
83
84	vdda: regulator-vdda {
85		compatible = "regulator-fixed";
86		regulator-name = "vdda";
87		regulator-min-microvolt = <3300000>;
88		regulator-max-microvolt = <3300000>;
89	};
90
91	vref: regulator-vref {
92		compatible = "regulator-fixed";
93		regulator-name = "vref";
94		regulator-min-microvolt = <3300000>;
95		regulator-max-microvolt = <3300000>;
96	};
97
98	vdd_panel: vdd-panel {
99		compatible = "regulator-fixed";
100		regulator-name = "vdd_panel";
101		regulator-min-microvolt = <3300000>;
102		regulator-max-microvolt = <3300000>;
103	};
104
105	leds {
106		compatible = "gpio-leds";
107		led-green {
108			gpios = <&gpiog 6 1>;
109			linux,default-trigger = "heartbeat";
110		};
111		led-orange {
112			gpios = <&gpiog 7 1>;
113		};
114		led-red {
115			gpios = <&gpiog 10 1>;
116		};
117		led-blue {
118			gpios = <&gpiog 12 1>;
119		};
120	};
121
122	gpio_keys {
123		compatible = "gpio-keys";
124		#address-cells = <1>;
125		#size-cells = <0>;
126		autorepeat;
127		button@0 {
128			label = "Wake up";
129			linux,code = <KEY_WAKEUP>;
130			gpios = <&gpioa 0 0>;
131		};
132		button@1 {
133			label = "Tamper";
134			linux,code = <KEY_RESTART>;
135			gpios = <&gpioc 13 0>;
136		};
137	};
138
139	usbotg_hs_phy: usbphy {
140		#phy-cells = <0>;
141		compatible = "usb-nop-xceiv";
142		clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
143		clock-names = "main_clk";
144	};
145
146	panel_rgb: panel-rgb {
147		compatible = "ampire,am-480272h3tmqw-t01h";
148		power-supply = <&vdd_panel>;
149		status = "okay";
150		port {
151			panel_in_rgb: endpoint {
152				remote-endpoint = <&ltdc_out_rgb>;
153			};
154		};
155	};
156
157	mmc_vcard: mmc_vcard {
158		compatible = "regulator-fixed";
159		regulator-name = "mmc_vcard";
160		regulator-min-microvolt = <3300000>;
161		regulator-max-microvolt = <3300000>;
162	};
163};
164
165&adc {
166	pinctrl-names = "default";
167	pinctrl-0 = <&adc3_in8_pin>;
168	vdda-supply = <&vdda>;
169	vref-supply = <&vref>;
170	status = "okay";
171	adc3: adc@200 {
172		st,adc-channels = <8>;
173		status = "okay";
174	};
175};
176
177&clk_hse {
178	clock-frequency = <25000000>;
179};
180
181&crc {
182	status = "okay";
183};
184
185&dcmi {
186	status = "okay";
187
188	port {
189		dcmi_0: endpoint {
190			remote-endpoint = <&ov2640_0>;
191			bus-type = <5>;
192			bus-width = <8>;
193			hsync-active = <0>;
194			vsync-active = <0>;
195			pclk-sample = <1>;
196		};
197	};
198};
199
200&i2c1 {
201	pinctrl-0 = <&i2c1_pins>;
202	pinctrl-names = "default";
203	status = "okay";
204
205	ov2640: camera@30 {
206		compatible = "ovti,ov2640";
207		reg = <0x30>;
208		resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
209		pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
210		clocks = <&clk_ext_camera>;
211		clock-names = "xvclk";
212		status = "okay";
213
214		port {
215			ov2640_0: endpoint {
216				remote-endpoint = <&dcmi_0>;
217			};
218		};
219	};
220
221	stmpe1600: stmpe1600@42 {
222		compatible = "st,stmpe1600";
223		reg = <0x42>;
224		interrupts = <8 3>;
225		interrupt-parent = <&gpioi>;
226		interrupt-controller;
227		wakeup-source;
228
229		stmpegpio: stmpe_gpio {
230			compatible = "st,stmpe-gpio";
231			gpio-controller;
232			#gpio-cells = <2>;
233		};
234	};
235};
236
237&iwdg {
238	status = "okay";
239	timeout-sec = <32>;
240};
241
242&ltdc {
243	status = "okay";
244	pinctrl-0 = <&ltdc_pins_a>;
245	pinctrl-names = "default";
246
247	port {
248		ltdc_out_rgb: endpoint {
249			remote-endpoint = <&panel_in_rgb>;
250		};
251	};
252};
253
254&mac {
255	status = "okay";
256	pinctrl-0	= <&ethernet_mii>;
257	pinctrl-names	= "default";
258	phy-mode	= "mii";
259	phy-handle	= <&phy1>;
260	mdio0 {
261		#address-cells = <1>;
262		#size-cells = <0>;
263		compatible = "snps,dwmac-mdio";
264		phy1: ethernet-phy@1 {
265			reg = <1>;
266		};
267	};
268};
269
270&rtc {
271	status = "okay";
272};
273
274&sdio {
275	status = "okay";
276	vmmc-supply = <&mmc_vcard>;
277	cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>;
278	pinctrl-names = "default", "opendrain";
279	pinctrl-0 = <&sdio_pins>;
280	pinctrl-1 = <&sdio_pins_od>;
281	bus-width = <4>;
282	max-frequency = <12500000>;
283};
284
285&timers1 {
286	status = "okay";
287
288	pwm {
289		pinctrl-0 = <&pwm1_pins>;
290		pinctrl-names = "default";
291		status = "okay";
292	};
293
294	timer@0 {
295		status = "okay";
296	};
297};
298
299&timers3 {
300	status = "okay";
301
302	pwm {
303		pinctrl-0 = <&pwm3_pins>;
304		pinctrl-names = "default";
305		status = "okay";
306	};
307
308	timer@2 {
309		status = "okay";
310	};
311};
312
313&usart1 {
314	pinctrl-0 = <&usart1_pins_a>;
315	pinctrl-names = "default";
316	status = "okay";
317};
318
319&usbotg_hs {
320	dr_mode = "host";
321	phys = <&usbotg_hs_phy>;
322	phy-names = "usb2-phy";
323	pinctrl-0 = <&usbotg_hs_pins_a>;
324	pinctrl-names = "default";
325	status = "okay";
326};
327