1/* 2 * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43#include "sunxi-common-regulators.dtsi" 44 45#include <dt-bindings/gpio/gpio.h> 46#include <dt-bindings/input/input.h> 47 48/ { 49 aliases { 50 ethernet0 = &emac; 51 serial0 = &uart0; 52 serial1 = &uart1; 53 }; 54 55 chosen { 56 stdout-path = "serial0:115200n8"; 57 }; 58 59 connector { 60 compatible = "hdmi-connector"; 61 type = "a"; 62 63 port { 64 hdmi_con_in: endpoint { 65 remote-endpoint = <&hdmi_out_con>; 66 }; 67 }; 68 }; 69 70 leds { 71 compatible = "gpio-leds"; 72 73 pwr_led { 74 label = "bananapi-m2-plus:red:pwr"; 75 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ 76 default-state = "on"; 77 }; 78 }; 79 80 gpio_keys { 81 compatible = "gpio-keys"; 82 83 sw4 { 84 label = "power"; 85 linux,code = <BTN_0>; 86 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; 87 }; 88 }; 89 90 reg_gmac_3v3: gmac-3v3 { 91 compatible = "regulator-fixed"; 92 regulator-name = "gmac-3v3"; 93 regulator-min-microvolt = <3300000>; 94 regulator-max-microvolt = <3300000>; 95 startup-delay-us = <100000>; 96 enable-active-high; 97 gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; 98 }; 99 100 wifi_pwrseq: wifi_pwrseq { 101 compatible = "mmc-pwrseq-simple"; 102 reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ 103 clocks = <&rtc 1>; 104 clock-names = "ext_clock"; 105 }; 106}; 107 108&de { 109 status = "okay"; 110}; 111 112&ehci0 { 113 status = "okay"; 114}; 115 116&ehci1 { 117 status = "okay"; 118}; 119 120&ehci2 { 121 status = "okay"; 122}; 123 124&emac { 125 pinctrl-names = "default"; 126 pinctrl-0 = <&emac_rgmii_pins>; 127 phy-supply = <®_gmac_3v3>; 128 phy-handle = <&ext_rgmii_phy>; 129 phy-mode = "rgmii-id"; 130 131 status = "okay"; 132}; 133 134&external_mdio { 135 ext_rgmii_phy: ethernet-phy@1 { 136 compatible = "ethernet-phy-ieee802.3-c22"; 137 reg = <1>; 138 }; 139}; 140 141&hdmi { 142 status = "okay"; 143}; 144 145&hdmi_out { 146 hdmi_out_con: endpoint { 147 remote-endpoint = <&hdmi_con_in>; 148 }; 149}; 150 151&ir { 152 pinctrl-names = "default"; 153 pinctrl-0 = <&r_ir_rx_pin>; 154 status = "okay"; 155}; 156 157&mmc0 { 158 vmmc-supply = <®_vcc3v3>; 159 bus-width = <4>; 160 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ 161 status = "okay"; 162}; 163 164&mmc1 { 165 vmmc-supply = <®_vcc3v3>; 166 vqmmc-supply = <®_vcc3v3>; 167 mmc-pwrseq = <&wifi_pwrseq>; 168 bus-width = <4>; 169 non-removable; 170 status = "okay"; 171 172 brcmf: wifi@1 { 173 reg = <1>; 174 compatible = "brcm,bcm4329-fmac"; 175 interrupt-parent = <&pio>; 176 interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ 177 interrupt-names = "host-wake"; 178 }; 179}; 180 181&mmc2 { 182 pinctrl-names = "default"; 183 pinctrl-0 = <&mmc2_8bit_pins>; 184 vmmc-supply = <®_vcc3v3>; 185 vqmmc-supply = <®_vcc3v3>; 186 bus-width = <8>; 187 non-removable; 188 status = "okay"; 189}; 190 191&ohci0 { 192 status = "okay"; 193}; 194 195&ohci1 { 196 status = "okay"; 197}; 198 199&ohci2 { 200 status = "okay"; 201}; 202 203®_usb0_vbus { 204 gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ 205 status = "okay"; 206}; 207 208&uart0 { 209 pinctrl-names = "default"; 210 pinctrl-0 = <&uart0_pa_pins>; 211 status = "okay"; 212}; 213 214&uart1 { 215 pinctrl-names = "default"; 216 pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; 217 uart-has-rtscts; 218 status = "okay"; 219 220 bluetooth { 221 compatible = "brcm,bcm43438-bt"; 222 max-speed = <1500000>; 223 clocks = <&rtc 1>; 224 clock-names = "lpo"; 225 vbat-supply = <®_vcc3v3>; 226 vddio-supply = <®_vcc3v3>; 227 device-wakeup-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ 228 host-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ 229 shutdown-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ 230 }; 231}; 232 233&usb_otg { 234 dr_mode = "otg"; 235 status = "okay"; 236}; 237 238&usbphy { 239 usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ 240 usb0_vbus-supply = <®_usb0_vbus>; 241 /* USB host VBUS is on as long as VCC-IO is on */ 242 status = "okay"; 243}; 244