1 // SPDX-License-Identifier: GPL-2.0-only
2 /******************************************************************************
3 *
4 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
5 *
6 * Contact Information:
7 * Intel Linux Wireless <ilw@linux.intel.com>
8 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
9 *
10 *****************************************************************************/
11
12 #include <linux/kernel.h>
13 #include <linux/module.h>
14 #include <linux/slab.h>
15 #include <linux/pci.h>
16 #include <linux/dma-mapping.h>
17 #include <linux/delay.h>
18 #include <linux/sched.h>
19 #include <linux/skbuff.h>
20 #include <linux/netdevice.h>
21 #include <linux/firmware.h>
22 #include <linux/etherdevice.h>
23 #include <asm/unaligned.h>
24 #include <net/mac80211.h>
25
26 #include "common.h"
27 #include "3945.h"
28
29 /* Send led command */
30 static int
il3945_send_led_cmd(struct il_priv * il,struct il_led_cmd * led_cmd)31 il3945_send_led_cmd(struct il_priv *il, struct il_led_cmd *led_cmd)
32 {
33 struct il_host_cmd cmd = {
34 .id = C_LEDS,
35 .len = sizeof(struct il_led_cmd),
36 .data = led_cmd,
37 .flags = CMD_ASYNC,
38 .callback = NULL,
39 };
40
41 return il_send_cmd(il, &cmd);
42 }
43
44 #define IL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
45 [RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \
46 RATE_##r##M_IEEE, \
47 RATE_##ip##M_IDX, \
48 RATE_##in##M_IDX, \
49 RATE_##rp##M_IDX, \
50 RATE_##rn##M_IDX, \
51 RATE_##pp##M_IDX, \
52 RATE_##np##M_IDX, \
53 RATE_##r##M_IDX_TBL, \
54 RATE_##ip##M_IDX_TBL }
55
56 /*
57 * Parameter order:
58 * rate, prev rate, next rate, prev tgg rate, next tgg rate
59 *
60 * If there isn't a valid next or previous rate then INV is used which
61 * maps to RATE_INVALID
62 *
63 */
64 const struct il3945_rate_info il3945_rates[RATE_COUNT_3945] = {
65 IL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */
66 IL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */
67 IL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */
68 IL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */
69 IL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */
70 IL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */
71 IL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */
72 IL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */
73 IL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */
74 IL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */
75 IL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */
76 IL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV), /* 54mbps */
77 };
78
79 static inline u8
il3945_get_prev_ieee_rate(u8 rate_idx)80 il3945_get_prev_ieee_rate(u8 rate_idx)
81 {
82 u8 rate = il3945_rates[rate_idx].prev_ieee;
83
84 if (rate == RATE_INVALID)
85 rate = rate_idx;
86 return rate;
87 }
88
89 /* 1 = enable the il3945_disable_events() function */
90 #define IL_EVT_DISABLE (0)
91 #define IL_EVT_DISABLE_SIZE (1532/32)
92
93 /*
94 * il3945_disable_events - Disable selected events in uCode event log
95 *
96 * Disable an event by writing "1"s into "disable"
97 * bitmap in SRAM. Bit position corresponds to Event # (id/type).
98 * Default values of 0 enable uCode events to be logged.
99 * Use for only special debugging. This function is just a placeholder as-is,
100 * you'll need to provide the special bits! ...
101 * ... and set IL_EVT_DISABLE to 1. */
102 void
il3945_disable_events(struct il_priv * il)103 il3945_disable_events(struct il_priv *il)
104 {
105 int i;
106 u32 base; /* SRAM address of event log header */
107 u32 disable_ptr; /* SRAM address of event-disable bitmap array */
108 u32 array_size; /* # of u32 entries in array */
109 static const u32 evt_disable[IL_EVT_DISABLE_SIZE] = {
110 0x00000000, /* 31 - 0 Event id numbers */
111 0x00000000, /* 63 - 32 */
112 0x00000000, /* 95 - 64 */
113 0x00000000, /* 127 - 96 */
114 0x00000000, /* 159 - 128 */
115 0x00000000, /* 191 - 160 */
116 0x00000000, /* 223 - 192 */
117 0x00000000, /* 255 - 224 */
118 0x00000000, /* 287 - 256 */
119 0x00000000, /* 319 - 288 */
120 0x00000000, /* 351 - 320 */
121 0x00000000, /* 383 - 352 */
122 0x00000000, /* 415 - 384 */
123 0x00000000, /* 447 - 416 */
124 0x00000000, /* 479 - 448 */
125 0x00000000, /* 511 - 480 */
126 0x00000000, /* 543 - 512 */
127 0x00000000, /* 575 - 544 */
128 0x00000000, /* 607 - 576 */
129 0x00000000, /* 639 - 608 */
130 0x00000000, /* 671 - 640 */
131 0x00000000, /* 703 - 672 */
132 0x00000000, /* 735 - 704 */
133 0x00000000, /* 767 - 736 */
134 0x00000000, /* 799 - 768 */
135 0x00000000, /* 831 - 800 */
136 0x00000000, /* 863 - 832 */
137 0x00000000, /* 895 - 864 */
138 0x00000000, /* 927 - 896 */
139 0x00000000, /* 959 - 928 */
140 0x00000000, /* 991 - 960 */
141 0x00000000, /* 1023 - 992 */
142 0x00000000, /* 1055 - 1024 */
143 0x00000000, /* 1087 - 1056 */
144 0x00000000, /* 1119 - 1088 */
145 0x00000000, /* 1151 - 1120 */
146 0x00000000, /* 1183 - 1152 */
147 0x00000000, /* 1215 - 1184 */
148 0x00000000, /* 1247 - 1216 */
149 0x00000000, /* 1279 - 1248 */
150 0x00000000, /* 1311 - 1280 */
151 0x00000000, /* 1343 - 1312 */
152 0x00000000, /* 1375 - 1344 */
153 0x00000000, /* 1407 - 1376 */
154 0x00000000, /* 1439 - 1408 */
155 0x00000000, /* 1471 - 1440 */
156 0x00000000, /* 1503 - 1472 */
157 };
158
159 base = le32_to_cpu(il->card_alive.log_event_table_ptr);
160 if (!il3945_hw_valid_rtc_data_addr(base)) {
161 IL_ERR("Invalid event log pointer 0x%08X\n", base);
162 return;
163 }
164
165 disable_ptr = il_read_targ_mem(il, base + (4 * sizeof(u32)));
166 array_size = il_read_targ_mem(il, base + (5 * sizeof(u32)));
167
168 if (IL_EVT_DISABLE && array_size == IL_EVT_DISABLE_SIZE) {
169 D_INFO("Disabling selected uCode log events at 0x%x\n",
170 disable_ptr);
171 for (i = 0; i < IL_EVT_DISABLE_SIZE; i++)
172 il_write_targ_mem(il, disable_ptr + (i * sizeof(u32)),
173 evt_disable[i]);
174
175 } else {
176 D_INFO("Selected uCode log events may be disabled\n");
177 D_INFO(" by writing \"1\"s into disable bitmap\n");
178 D_INFO(" in SRAM at 0x%x, size %d u32s\n", disable_ptr,
179 array_size);
180 }
181
182 }
183
184 static int
il3945_hwrate_to_plcp_idx(u8 plcp)185 il3945_hwrate_to_plcp_idx(u8 plcp)
186 {
187 int idx;
188
189 for (idx = 0; idx < RATE_COUNT_3945; idx++)
190 if (il3945_rates[idx].plcp == plcp)
191 return idx;
192 return -1;
193 }
194
195 #ifdef CONFIG_IWLEGACY_DEBUG
196 #define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
197
198 static const char *
il3945_get_tx_fail_reason(u32 status)199 il3945_get_tx_fail_reason(u32 status)
200 {
201 switch (status & TX_STATUS_MSK) {
202 case TX_3945_STATUS_SUCCESS:
203 return "SUCCESS";
204 TX_STATUS_ENTRY(SHORT_LIMIT);
205 TX_STATUS_ENTRY(LONG_LIMIT);
206 TX_STATUS_ENTRY(FIFO_UNDERRUN);
207 TX_STATUS_ENTRY(MGMNT_ABORT);
208 TX_STATUS_ENTRY(NEXT_FRAG);
209 TX_STATUS_ENTRY(LIFE_EXPIRE);
210 TX_STATUS_ENTRY(DEST_PS);
211 TX_STATUS_ENTRY(ABORTED);
212 TX_STATUS_ENTRY(BT_RETRY);
213 TX_STATUS_ENTRY(STA_INVALID);
214 TX_STATUS_ENTRY(FRAG_DROPPED);
215 TX_STATUS_ENTRY(TID_DISABLE);
216 TX_STATUS_ENTRY(FRAME_FLUSHED);
217 TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
218 TX_STATUS_ENTRY(TX_LOCKED);
219 TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
220 }
221
222 return "UNKNOWN";
223 }
224 #else
225 static inline const char *
il3945_get_tx_fail_reason(u32 status)226 il3945_get_tx_fail_reason(u32 status)
227 {
228 return "";
229 }
230 #endif
231
232 /*
233 * get ieee prev rate from rate scale table.
234 * for A and B mode we need to overright prev
235 * value
236 */
237 int
il3945_rs_next_rate(struct il_priv * il,int rate)238 il3945_rs_next_rate(struct il_priv *il, int rate)
239 {
240 int next_rate = il3945_get_prev_ieee_rate(rate);
241
242 switch (il->band) {
243 case NL80211_BAND_5GHZ:
244 if (rate == RATE_12M_IDX)
245 next_rate = RATE_9M_IDX;
246 else if (rate == RATE_6M_IDX)
247 next_rate = RATE_6M_IDX;
248 break;
249 case NL80211_BAND_2GHZ:
250 if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
251 il_is_associated(il)) {
252 if (rate == RATE_11M_IDX)
253 next_rate = RATE_5M_IDX;
254 }
255 break;
256
257 default:
258 break;
259 }
260
261 return next_rate;
262 }
263
264 /*
265 * il3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
266 *
267 * When FW advances 'R' idx, all entries between old and new 'R' idx
268 * need to be reclaimed. As result, some free space forms. If there is
269 * enough free space (> low mark), wake the stack that feeds us.
270 */
271 static void
il3945_tx_queue_reclaim(struct il_priv * il,int txq_id,int idx)272 il3945_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx)
273 {
274 struct il_tx_queue *txq = &il->txq[txq_id];
275 struct il_queue *q = &txq->q;
276 struct sk_buff *skb;
277
278 BUG_ON(txq_id == IL39_CMD_QUEUE_NUM);
279
280 for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
281 q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
282
283 skb = txq->skbs[txq->q.read_ptr];
284 ieee80211_tx_status_irqsafe(il->hw, skb);
285 txq->skbs[txq->q.read_ptr] = NULL;
286 il->ops->txq_free_tfd(il, txq);
287 }
288
289 if (il_queue_space(q) > q->low_mark && txq_id >= 0 &&
290 txq_id != IL39_CMD_QUEUE_NUM && il->mac80211_registered)
291 il_wake_queue(il, txq);
292 }
293
294 /*
295 * il3945_hdl_tx - Handle Tx response
296 */
297 static void
il3945_hdl_tx(struct il_priv * il,struct il_rx_buf * rxb)298 il3945_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb)
299 {
300 struct il_rx_pkt *pkt = rxb_addr(rxb);
301 u16 sequence = le16_to_cpu(pkt->hdr.sequence);
302 int txq_id = SEQ_TO_QUEUE(sequence);
303 int idx = SEQ_TO_IDX(sequence);
304 struct il_tx_queue *txq = &il->txq[txq_id];
305 struct ieee80211_tx_info *info;
306 struct il3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
307 u32 status = le32_to_cpu(tx_resp->status);
308 int rate_idx;
309 int fail;
310
311 if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
312 IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
313 "is out of range [0-%d] %d %d\n", txq_id, idx,
314 txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr);
315 return;
316 }
317
318 /*
319 * Firmware will not transmit frame on passive channel, if it not yet
320 * received some valid frame on that channel. When this error happen
321 * we have to wait until firmware will unblock itself i.e. when we
322 * note received beacon or other frame. We unblock queues in
323 * il3945_pass_packet_to_mac80211 or in il_mac_bss_info_changed.
324 */
325 if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) &&
326 il->iw_mode == NL80211_IFTYPE_STATION) {
327 il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
328 D_INFO("Stopped queues - RX waiting on passive channel\n");
329 }
330
331 txq->time_stamp = jiffies;
332 info = IEEE80211_SKB_CB(txq->skbs[txq->q.read_ptr]);
333 ieee80211_tx_info_clear_status(info);
334
335 /* Fill the MRR chain with some info about on-chip retransmissions */
336 rate_idx = il3945_hwrate_to_plcp_idx(tx_resp->rate);
337 if (info->band == NL80211_BAND_5GHZ)
338 rate_idx -= IL_FIRST_OFDM_RATE;
339
340 fail = tx_resp->failure_frame;
341
342 info->status.rates[0].idx = rate_idx;
343 info->status.rates[0].count = fail + 1; /* add final attempt */
344
345 /* tx_status->rts_retry_count = tx_resp->failure_rts; */
346 info->flags |=
347 ((status & TX_STATUS_MSK) ==
348 TX_STATUS_SUCCESS) ? IEEE80211_TX_STAT_ACK : 0;
349
350 D_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n", txq_id,
351 il3945_get_tx_fail_reason(status), status, tx_resp->rate,
352 tx_resp->failure_frame);
353
354 D_TX_REPLY("Tx queue reclaim %d\n", idx);
355 il3945_tx_queue_reclaim(il, txq_id, idx);
356
357 if (status & TX_ABORT_REQUIRED_MSK)
358 IL_ERR("TODO: Implement Tx ABORT REQUIRED!!!\n");
359 }
360
361 /*****************************************************************************
362 *
363 * Intel PRO/Wireless 3945ABG/BG Network Connection
364 *
365 * RX handler implementations
366 *
367 *****************************************************************************/
368 #ifdef CONFIG_IWLEGACY_DEBUGFS
369 static void
il3945_accumulative_stats(struct il_priv * il,__le32 * stats)370 il3945_accumulative_stats(struct il_priv *il, __le32 * stats)
371 {
372 int i;
373 __le32 *prev_stats;
374 u32 *accum_stats;
375 u32 *delta, *max_delta;
376
377 prev_stats = (__le32 *) &il->_3945.stats;
378 accum_stats = (u32 *) &il->_3945.accum_stats;
379 delta = (u32 *) &il->_3945.delta_stats;
380 max_delta = (u32 *) &il->_3945.max_delta;
381
382 for (i = sizeof(__le32); i < sizeof(struct il3945_notif_stats);
383 i +=
384 sizeof(__le32), stats++, prev_stats++, delta++, max_delta++,
385 accum_stats++) {
386 if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
387 *delta =
388 (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats));
389 *accum_stats += *delta;
390 if (*delta > *max_delta)
391 *max_delta = *delta;
392 }
393 }
394
395 /* reset accumulative stats for "no-counter" type stats */
396 il->_3945.accum_stats.general.temperature =
397 il->_3945.stats.general.temperature;
398 il->_3945.accum_stats.general.ttl_timestamp =
399 il->_3945.stats.general.ttl_timestamp;
400 }
401 #endif
402
403 void
il3945_hdl_stats(struct il_priv * il,struct il_rx_buf * rxb)404 il3945_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb)
405 {
406 struct il_rx_pkt *pkt = rxb_addr(rxb);
407
408 D_RX("Statistics notification received (%d vs %d).\n",
409 (int)sizeof(struct il3945_notif_stats),
410 le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK);
411 #ifdef CONFIG_IWLEGACY_DEBUGFS
412 il3945_accumulative_stats(il, (__le32 *) &pkt->u.raw);
413 #endif
414
415 memcpy(&il->_3945.stats, pkt->u.raw, sizeof(il->_3945.stats));
416 }
417
418 void
il3945_hdl_c_stats(struct il_priv * il,struct il_rx_buf * rxb)419 il3945_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb)
420 {
421 struct il_rx_pkt *pkt = rxb_addr(rxb);
422 __le32 *flag = (__le32 *) &pkt->u.raw;
423
424 if (le32_to_cpu(*flag) & UCODE_STATS_CLEAR_MSK) {
425 #ifdef CONFIG_IWLEGACY_DEBUGFS
426 memset(&il->_3945.accum_stats, 0,
427 sizeof(struct il3945_notif_stats));
428 memset(&il->_3945.delta_stats, 0,
429 sizeof(struct il3945_notif_stats));
430 memset(&il->_3945.max_delta, 0,
431 sizeof(struct il3945_notif_stats));
432 #endif
433 D_RX("Statistics have been cleared\n");
434 }
435 il3945_hdl_stats(il, rxb);
436 }
437
438 /******************************************************************************
439 *
440 * Misc. internal state and helper functions
441 *
442 ******************************************************************************/
443
444 /* This is necessary only for a number of stats, see the caller. */
445 static int
il3945_is_network_packet(struct il_priv * il,struct ieee80211_hdr * header)446 il3945_is_network_packet(struct il_priv *il, struct ieee80211_hdr *header)
447 {
448 /* Filter incoming packets to determine if they are targeted toward
449 * this network, discarding packets coming from ourselves */
450 switch (il->iw_mode) {
451 case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */
452 /* packets to our IBSS update information */
453 return ether_addr_equal_64bits(header->addr3, il->bssid);
454 case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
455 /* packets to our IBSS update information */
456 return ether_addr_equal_64bits(header->addr2, il->bssid);
457 default:
458 return 1;
459 }
460 }
461
462 #define SMALL_PACKET_SIZE 256
463
464 static void
il3945_pass_packet_to_mac80211(struct il_priv * il,struct il_rx_buf * rxb,struct ieee80211_rx_status * stats)465 il3945_pass_packet_to_mac80211(struct il_priv *il, struct il_rx_buf *rxb,
466 struct ieee80211_rx_status *stats)
467 {
468 struct il_rx_pkt *pkt = rxb_addr(rxb);
469 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
470 struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
471 struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
472 u32 len = le16_to_cpu(rx_hdr->len);
473 struct sk_buff *skb;
474 __le16 fc = hdr->frame_control;
475 u32 fraglen = PAGE_SIZE << il->hw_params.rx_page_order;
476
477 /* We received data from the HW, so stop the watchdog */
478 if (unlikely(len + IL39_RX_FRAME_SIZE > fraglen)) {
479 D_DROP("Corruption detected!\n");
480 return;
481 }
482
483 /* We only process data packets if the interface is open */
484 if (unlikely(!il->is_open)) {
485 D_DROP("Dropping packet while interface is not open.\n");
486 return;
487 }
488
489 if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) {
490 il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
491 D_INFO("Woke queues - frame received on passive channel\n");
492 }
493
494 skb = dev_alloc_skb(SMALL_PACKET_SIZE);
495 if (!skb) {
496 IL_ERR("dev_alloc_skb failed\n");
497 return;
498 }
499
500 if (!il3945_mod_params.sw_crypto)
501 il_set_decrypted_flag(il, (struct ieee80211_hdr *)pkt,
502 le32_to_cpu(rx_end->status), stats);
503
504 /* If frame is small enough to fit into skb->head, copy it
505 * and do not consume a full page
506 */
507 if (len <= SMALL_PACKET_SIZE) {
508 skb_put_data(skb, rx_hdr->payload, len);
509 } else {
510 skb_add_rx_frag(skb, 0, rxb->page,
511 (void *)rx_hdr->payload - (void *)pkt, len,
512 fraglen);
513 il->alloc_rxb_page--;
514 rxb->page = NULL;
515 }
516 il_update_stats(il, false, fc, len);
517 memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
518
519 ieee80211_rx(il->hw, skb);
520 }
521
522 #define IL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
523
524 static void
il3945_hdl_rx(struct il_priv * il,struct il_rx_buf * rxb)525 il3945_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb)
526 {
527 struct ieee80211_hdr *header;
528 struct ieee80211_rx_status rx_status = {};
529 struct il_rx_pkt *pkt = rxb_addr(rxb);
530 struct il3945_rx_frame_stats *rx_stats = IL_RX_STATS(pkt);
531 struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
532 struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
533 u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
534 u16 rx_stats_noise_diff __maybe_unused =
535 le16_to_cpu(rx_stats->noise_diff);
536 u8 network_packet;
537
538 rx_status.flag = 0;
539 rx_status.mactime = le64_to_cpu(rx_end->timestamp);
540 rx_status.band =
541 (rx_hdr->
542 phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? NL80211_BAND_2GHZ :
543 NL80211_BAND_5GHZ;
544 rx_status.freq =
545 ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel),
546 rx_status.band);
547
548 rx_status.rate_idx = il3945_hwrate_to_plcp_idx(rx_hdr->rate);
549 if (rx_status.band == NL80211_BAND_5GHZ)
550 rx_status.rate_idx -= IL_FIRST_OFDM_RATE;
551
552 rx_status.antenna =
553 (le16_to_cpu(rx_hdr->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >>
554 4;
555
556 /* set the preamble flag if appropriate */
557 if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
558 rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE;
559
560 if ((unlikely(rx_stats->phy_count > 20))) {
561 D_DROP("dsp size out of range [0,20]: %d\n",
562 rx_stats->phy_count);
563 return;
564 }
565
566 if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) ||
567 !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
568 D_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
569 return;
570 }
571
572 /* Convert 3945's rssi indicator to dBm */
573 rx_status.signal = rx_stats->rssi - IL39_RSSI_OFFSET;
574
575 D_STATS("Rssi %d sig_avg %d noise_diff %d\n", rx_status.signal,
576 rx_stats_sig_avg, rx_stats_noise_diff);
577
578 header = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
579
580 network_packet = il3945_is_network_packet(il, header);
581
582 D_STATS("[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
583 network_packet ? '*' : ' ', le16_to_cpu(rx_hdr->channel),
584 rx_status.signal, rx_status.signal, rx_status.rate_idx);
585
586 if (network_packet) {
587 il->_3945.last_beacon_time =
588 le32_to_cpu(rx_end->beacon_timestamp);
589 il->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
590 il->_3945.last_rx_rssi = rx_status.signal;
591 }
592
593 il3945_pass_packet_to_mac80211(il, rxb, &rx_status);
594 }
595
596 int
il3945_hw_txq_attach_buf_to_tfd(struct il_priv * il,struct il_tx_queue * txq,dma_addr_t addr,u16 len,u8 reset,u8 pad)597 il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq,
598 dma_addr_t addr, u16 len, u8 reset, u8 pad)
599 {
600 int count;
601 struct il_queue *q;
602 struct il3945_tfd *tfd, *tfd_tmp;
603
604 q = &txq->q;
605 tfd_tmp = (struct il3945_tfd *)txq->tfds;
606 tfd = &tfd_tmp[q->write_ptr];
607
608 if (reset)
609 memset(tfd, 0, sizeof(*tfd));
610
611 count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
612
613 if (count >= NUM_TFD_CHUNKS || count < 0) {
614 IL_ERR("Error can not send more than %d chunks\n",
615 NUM_TFD_CHUNKS);
616 return -EINVAL;
617 }
618
619 tfd->tbs[count].addr = cpu_to_le32(addr);
620 tfd->tbs[count].len = cpu_to_le32(len);
621
622 count++;
623
624 tfd->control_flags =
625 cpu_to_le32(TFD_CTL_COUNT_SET(count) | TFD_CTL_PAD_SET(pad));
626
627 return 0;
628 }
629
630 /*
631 * il3945_hw_txq_free_tfd - Free one TFD, those at idx [txq->q.read_ptr]
632 *
633 * Does NOT advance any idxes
634 */
635 void
il3945_hw_txq_free_tfd(struct il_priv * il,struct il_tx_queue * txq)636 il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
637 {
638 struct il3945_tfd *tfd_tmp = (struct il3945_tfd *)txq->tfds;
639 int idx = txq->q.read_ptr;
640 struct il3945_tfd *tfd = &tfd_tmp[idx];
641 struct pci_dev *dev = il->pci_dev;
642 int i;
643 int counter;
644
645 /* sanity check */
646 counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
647 if (counter > NUM_TFD_CHUNKS) {
648 IL_ERR("Too many chunks: %i\n", counter);
649 /* @todo issue fatal error, it is quite serious situation */
650 return;
651 }
652
653 /* Unmap tx_cmd */
654 if (counter)
655 pci_unmap_single(dev, dma_unmap_addr(&txq->meta[idx], mapping),
656 dma_unmap_len(&txq->meta[idx], len),
657 PCI_DMA_TODEVICE);
658
659 /* unmap chunks if any */
660
661 for (i = 1; i < counter; i++)
662 pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr),
663 le32_to_cpu(tfd->tbs[i].len),
664 PCI_DMA_TODEVICE);
665
666 /* free SKB */
667 if (txq->skbs) {
668 struct sk_buff *skb = txq->skbs[txq->q.read_ptr];
669
670 /* can be called from irqs-disabled context */
671 if (skb) {
672 dev_kfree_skb_any(skb);
673 txq->skbs[txq->q.read_ptr] = NULL;
674 }
675 }
676 }
677
678 /*
679 * il3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
680 *
681 */
682 void
il3945_hw_build_tx_cmd_rate(struct il_priv * il,struct il_device_cmd * cmd,struct ieee80211_tx_info * info,struct ieee80211_hdr * hdr,int sta_id)683 il3945_hw_build_tx_cmd_rate(struct il_priv *il, struct il_device_cmd *cmd,
684 struct ieee80211_tx_info *info,
685 struct ieee80211_hdr *hdr, int sta_id)
686 {
687 u16 hw_value = ieee80211_get_tx_rate(il->hw, info)->hw_value;
688 u16 rate_idx = min(hw_value & 0xffff, RATE_COUNT_3945 - 1);
689 u16 rate_mask;
690 int rate;
691 const u8 rts_retry_limit = 7;
692 u8 data_retry_limit;
693 __le32 tx_flags;
694 __le16 fc = hdr->frame_control;
695 struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
696
697 rate = il3945_rates[rate_idx].plcp;
698 tx_flags = tx_cmd->tx_flags;
699
700 /* We need to figure out how to get the sta->supp_rates while
701 * in this running context */
702 rate_mask = RATES_MASK_3945;
703
704 /* Set retry limit on DATA packets and Probe Responses */
705 if (ieee80211_is_probe_resp(fc))
706 data_retry_limit = 3;
707 else
708 data_retry_limit = IL_DEFAULT_TX_RETRY;
709 tx_cmd->data_retry_limit = data_retry_limit;
710 /* Set retry limit on RTS packets */
711 tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit);
712
713 tx_cmd->rate = rate;
714 tx_cmd->tx_flags = tx_flags;
715
716 /* OFDM */
717 tx_cmd->supp_rates[0] =
718 ((rate_mask & IL_OFDM_RATES_MASK) >> IL_FIRST_OFDM_RATE) & 0xFF;
719
720 /* CCK */
721 tx_cmd->supp_rates[1] = (rate_mask & 0xF);
722
723 D_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
724 "cck/ofdm mask: 0x%x/0x%x\n", sta_id, tx_cmd->rate,
725 le32_to_cpu(tx_cmd->tx_flags), tx_cmd->supp_rates[1],
726 tx_cmd->supp_rates[0]);
727 }
728
729 static u8
il3945_sync_sta(struct il_priv * il,int sta_id,u16 tx_rate)730 il3945_sync_sta(struct il_priv *il, int sta_id, u16 tx_rate)
731 {
732 unsigned long flags_spin;
733 struct il_station_entry *station;
734
735 if (sta_id == IL_INVALID_STATION)
736 return IL_INVALID_STATION;
737
738 spin_lock_irqsave(&il->sta_lock, flags_spin);
739 station = &il->stations[sta_id];
740
741 station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
742 station->sta.rate_n_flags = cpu_to_le16(tx_rate);
743 station->sta.mode = STA_CONTROL_MODIFY_MSK;
744 il_send_add_sta(il, &station->sta, CMD_ASYNC);
745 spin_unlock_irqrestore(&il->sta_lock, flags_spin);
746
747 D_RATE("SCALE sync station %d to rate %d\n", sta_id, tx_rate);
748 return sta_id;
749 }
750
751 static void
il3945_set_pwr_vmain(struct il_priv * il)752 il3945_set_pwr_vmain(struct il_priv *il)
753 {
754 /*
755 * (for documentation purposes)
756 * to set power to V_AUX, do
757
758 if (pci_pme_capable(il->pci_dev, PCI_D3cold)) {
759 il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
760 APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
761 ~APMG_PS_CTRL_MSK_PWR_SRC);
762
763 _il_poll_bit(il, CSR_GPIO_IN,
764 CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
765 CSR_GPIO_IN_BIT_AUX_POWER, 5000);
766 }
767 */
768
769 il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
770 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
771 ~APMG_PS_CTRL_MSK_PWR_SRC);
772
773 _il_poll_bit(il, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
774 CSR_GPIO_IN_BIT_AUX_POWER, 5000);
775 }
776
777 static int
il3945_rx_init(struct il_priv * il,struct il_rx_queue * rxq)778 il3945_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
779 {
780 il_wr(il, FH39_RCSR_RBD_BASE(0), rxq->bd_dma);
781 il_wr(il, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma);
782 il_wr(il, FH39_RCSR_WPTR(0), 0);
783 il_wr(il, FH39_RCSR_CONFIG(0),
784 FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
785 FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
786 FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
787 FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | (RX_QUEUE_SIZE_LOG
788 <<
789 FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE)
790 | FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | (1 <<
791 FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH)
792 | FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
793
794 /* fake read to flush all prev I/O */
795 il_rd(il, FH39_RSSR_CTRL);
796
797 return 0;
798 }
799
800 static int
il3945_tx_reset(struct il_priv * il)801 il3945_tx_reset(struct il_priv *il)
802 {
803 /* bypass mode */
804 il_wr_prph(il, ALM_SCD_MODE_REG, 0x2);
805
806 /* RA 0 is active */
807 il_wr_prph(il, ALM_SCD_ARASTAT_REG, 0x01);
808
809 /* all 6 fifo are active */
810 il_wr_prph(il, ALM_SCD_TXFACT_REG, 0x3f);
811
812 il_wr_prph(il, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
813 il_wr_prph(il, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
814 il_wr_prph(il, ALM_SCD_TXF4MF_REG, 0x000004);
815 il_wr_prph(il, ALM_SCD_TXF5MF_REG, 0x000005);
816
817 il_wr(il, FH39_TSSR_CBB_BASE, il->_3945.shared_phys);
818
819 il_wr(il, FH39_TSSR_MSG_CONFIG,
820 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
821 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
822 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
823 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
824 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
825 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
826 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
827
828 return 0;
829 }
830
831 /*
832 * il3945_txq_ctx_reset - Reset TX queue context
833 *
834 * Destroys all DMA structures and initialize them again
835 */
836 static int
il3945_txq_ctx_reset(struct il_priv * il)837 il3945_txq_ctx_reset(struct il_priv *il)
838 {
839 int rc, txq_id;
840
841 il3945_hw_txq_ctx_free(il);
842
843 /* allocate tx queue structure */
844 rc = il_alloc_txq_mem(il);
845 if (rc)
846 return rc;
847
848 /* Tx CMD queue */
849 rc = il3945_tx_reset(il);
850 if (rc)
851 goto error;
852
853 /* Tx queue(s) */
854 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
855 rc = il_tx_queue_init(il, txq_id);
856 if (rc) {
857 IL_ERR("Tx %d queue init failed\n", txq_id);
858 goto error;
859 }
860 }
861
862 return rc;
863
864 error:
865 il3945_hw_txq_ctx_free(il);
866 return rc;
867 }
868
869 /*
870 * Start up 3945's basic functionality after it has been reset
871 * (e.g. after platform boot, or shutdown via il_apm_stop())
872 * NOTE: This does not load uCode nor start the embedded processor
873 */
874 static int
il3945_apm_init(struct il_priv * il)875 il3945_apm_init(struct il_priv *il)
876 {
877 int ret = il_apm_init(il);
878
879 /* Clear APMG (NIC's internal power management) interrupts */
880 il_wr_prph(il, APMG_RTC_INT_MSK_REG, 0x0);
881 il_wr_prph(il, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
882
883 /* Reset radio chip */
884 il_set_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
885 udelay(5);
886 il_clear_bits_prph(il, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
887
888 return ret;
889 }
890
891 static void
il3945_nic_config(struct il_priv * il)892 il3945_nic_config(struct il_priv *il)
893 {
894 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
895 unsigned long flags;
896 u8 rev_id = il->pci_dev->revision;
897
898 spin_lock_irqsave(&il->lock, flags);
899
900 /* Determine HW type */
901 D_INFO("HW Revision ID = 0x%X\n", rev_id);
902
903 if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
904 D_INFO("RTP type\n");
905 else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
906 D_INFO("3945 RADIO-MB type\n");
907 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
908 CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
909 } else {
910 D_INFO("3945 RADIO-MM type\n");
911 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
912 CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
913 }
914
915 if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
916 D_INFO("SKU OP mode is mrc\n");
917 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
918 CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
919 } else
920 D_INFO("SKU OP mode is basic\n");
921
922 if ((eeprom->board_revision & 0xF0) == 0xD0) {
923 D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision);
924 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
925 CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
926 } else {
927 D_INFO("3945ABG revision is 0x%X\n", eeprom->board_revision);
928 il_clear_bit(il, CSR_HW_IF_CONFIG_REG,
929 CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
930 }
931
932 if (eeprom->almgor_m_version <= 1) {
933 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
934 CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
935 D_INFO("Card M type A version is 0x%X\n",
936 eeprom->almgor_m_version);
937 } else {
938 D_INFO("Card M type B version is 0x%X\n",
939 eeprom->almgor_m_version);
940 il_set_bit(il, CSR_HW_IF_CONFIG_REG,
941 CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
942 }
943 spin_unlock_irqrestore(&il->lock, flags);
944
945 if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
946 D_RF_KILL("SW RF KILL supported in EEPROM.\n");
947
948 if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
949 D_RF_KILL("HW RF KILL supported in EEPROM.\n");
950 }
951
952 int
il3945_hw_nic_init(struct il_priv * il)953 il3945_hw_nic_init(struct il_priv *il)
954 {
955 int rc;
956 unsigned long flags;
957 struct il_rx_queue *rxq = &il->rxq;
958
959 spin_lock_irqsave(&il->lock, flags);
960 il3945_apm_init(il);
961 spin_unlock_irqrestore(&il->lock, flags);
962
963 il3945_set_pwr_vmain(il);
964 il3945_nic_config(il);
965
966 /* Allocate the RX queue, or reset if it is already allocated */
967 if (!rxq->bd) {
968 rc = il_rx_queue_alloc(il);
969 if (rc) {
970 IL_ERR("Unable to initialize Rx queue\n");
971 return -ENOMEM;
972 }
973 } else
974 il3945_rx_queue_reset(il, rxq);
975
976 il3945_rx_replenish(il);
977
978 il3945_rx_init(il, rxq);
979
980 /* Look at using this instead:
981 rxq->need_update = 1;
982 il_rx_queue_update_write_ptr(il, rxq);
983 */
984
985 il_wr(il, FH39_RCSR_WPTR(0), rxq->write & ~7);
986
987 rc = il3945_txq_ctx_reset(il);
988 if (rc)
989 return rc;
990
991 set_bit(S_INIT, &il->status);
992
993 return 0;
994 }
995
996 /*
997 * il3945_hw_txq_ctx_free - Free TXQ Context
998 *
999 * Destroy all TX DMA queues and structures
1000 */
1001 void
il3945_hw_txq_ctx_free(struct il_priv * il)1002 il3945_hw_txq_ctx_free(struct il_priv *il)
1003 {
1004 int txq_id;
1005
1006 /* Tx queues */
1007 if (il->txq) {
1008 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
1009 if (txq_id == IL39_CMD_QUEUE_NUM)
1010 il_cmd_queue_free(il);
1011 else
1012 il_tx_queue_free(il, txq_id);
1013 }
1014
1015 /* free tx queue structure */
1016 il_free_txq_mem(il);
1017 }
1018
1019 void
il3945_hw_txq_ctx_stop(struct il_priv * il)1020 il3945_hw_txq_ctx_stop(struct il_priv *il)
1021 {
1022 int txq_id;
1023
1024 /* stop SCD */
1025 _il_wr_prph(il, ALM_SCD_MODE_REG, 0);
1026 _il_wr_prph(il, ALM_SCD_TXFACT_REG, 0);
1027
1028 /* reset TFD queues */
1029 for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
1030 _il_wr(il, FH39_TCSR_CONFIG(txq_id), 0x0);
1031 _il_poll_bit(il, FH39_TSSR_TX_STATUS,
1032 FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
1033 FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
1034 1000);
1035 }
1036 }
1037
1038 /*
1039 * il3945_hw_reg_adjust_power_by_temp
1040 * return idx delta into power gain settings table
1041 */
1042 static int
il3945_hw_reg_adjust_power_by_temp(int new_reading,int old_reading)1043 il3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
1044 {
1045 return (new_reading - old_reading) * (-11) / 100;
1046 }
1047
1048 /*
1049 * il3945_hw_reg_temp_out_of_range - Keep temperature in sane range
1050 */
1051 static inline int
il3945_hw_reg_temp_out_of_range(int temperature)1052 il3945_hw_reg_temp_out_of_range(int temperature)
1053 {
1054 return (temperature < -260 || temperature > 25) ? 1 : 0;
1055 }
1056
1057 int
il3945_hw_get_temperature(struct il_priv * il)1058 il3945_hw_get_temperature(struct il_priv *il)
1059 {
1060 return _il_rd(il, CSR_UCODE_DRV_GP2);
1061 }
1062
1063 /*
1064 * il3945_hw_reg_txpower_get_temperature
1065 * get the current temperature by reading from NIC
1066 */
1067 static int
il3945_hw_reg_txpower_get_temperature(struct il_priv * il)1068 il3945_hw_reg_txpower_get_temperature(struct il_priv *il)
1069 {
1070 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1071 int temperature;
1072
1073 temperature = il3945_hw_get_temperature(il);
1074
1075 /* driver's okay range is -260 to +25.
1076 * human readable okay range is 0 to +285 */
1077 D_INFO("Temperature: %d\n", temperature + IL_TEMP_CONVERT);
1078
1079 /* handle insane temp reading */
1080 if (il3945_hw_reg_temp_out_of_range(temperature)) {
1081 IL_ERR("Error bad temperature value %d\n", temperature);
1082
1083 /* if really really hot(?),
1084 * substitute the 3rd band/group's temp measured at factory */
1085 if (il->last_temperature > 100)
1086 temperature = eeprom->groups[2].temperature;
1087 else /* else use most recent "sane" value from driver */
1088 temperature = il->last_temperature;
1089 }
1090
1091 return temperature; /* raw, not "human readable" */
1092 }
1093
1094 /* Adjust Txpower only if temperature variance is greater than threshold.
1095 *
1096 * Both are lower than older versions' 9 degrees */
1097 #define IL_TEMPERATURE_LIMIT_TIMER 6
1098
1099 /*
1100 * il3945_is_temp_calib_needed - determines if new calibration is needed
1101 *
1102 * records new temperature in tx_mgr->temperature.
1103 * replaces tx_mgr->last_temperature *only* if calib needed
1104 * (assumes caller will actually do the calibration!). */
1105 static int
il3945_is_temp_calib_needed(struct il_priv * il)1106 il3945_is_temp_calib_needed(struct il_priv *il)
1107 {
1108 int temp_diff;
1109
1110 il->temperature = il3945_hw_reg_txpower_get_temperature(il);
1111 temp_diff = il->temperature - il->last_temperature;
1112
1113 /* get absolute value */
1114 if (temp_diff < 0) {
1115 D_POWER("Getting cooler, delta %d,\n", temp_diff);
1116 temp_diff = -temp_diff;
1117 } else if (temp_diff == 0)
1118 D_POWER("Same temp,\n");
1119 else
1120 D_POWER("Getting warmer, delta %d,\n", temp_diff);
1121
1122 /* if we don't need calibration, *don't* update last_temperature */
1123 if (temp_diff < IL_TEMPERATURE_LIMIT_TIMER) {
1124 D_POWER("Timed thermal calib not needed\n");
1125 return 0;
1126 }
1127
1128 D_POWER("Timed thermal calib needed\n");
1129
1130 /* assume that caller will actually do calib ...
1131 * update the "last temperature" value */
1132 il->last_temperature = il->temperature;
1133 return 1;
1134 }
1135
1136 #define IL_MAX_GAIN_ENTRIES 78
1137 #define IL_CCK_FROM_OFDM_POWER_DIFF -5
1138 #define IL_CCK_FROM_OFDM_IDX_DIFF (10)
1139
1140 /* radio and DSP power table, each step is 1/2 dB.
1141 * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
1142 static struct il3945_tx_power power_gain_table[2][IL_MAX_GAIN_ENTRIES] = {
1143 {
1144 {251, 127}, /* 2.4 GHz, highest power */
1145 {251, 127},
1146 {251, 127},
1147 {251, 127},
1148 {251, 125},
1149 {251, 110},
1150 {251, 105},
1151 {251, 98},
1152 {187, 125},
1153 {187, 115},
1154 {187, 108},
1155 {187, 99},
1156 {243, 119},
1157 {243, 111},
1158 {243, 105},
1159 {243, 97},
1160 {243, 92},
1161 {211, 106},
1162 {211, 100},
1163 {179, 120},
1164 {179, 113},
1165 {179, 107},
1166 {147, 125},
1167 {147, 119},
1168 {147, 112},
1169 {147, 106},
1170 {147, 101},
1171 {147, 97},
1172 {147, 91},
1173 {115, 107},
1174 {235, 121},
1175 {235, 115},
1176 {235, 109},
1177 {203, 127},
1178 {203, 121},
1179 {203, 115},
1180 {203, 108},
1181 {203, 102},
1182 {203, 96},
1183 {203, 92},
1184 {171, 110},
1185 {171, 104},
1186 {171, 98},
1187 {139, 116},
1188 {227, 125},
1189 {227, 119},
1190 {227, 113},
1191 {227, 107},
1192 {227, 101},
1193 {227, 96},
1194 {195, 113},
1195 {195, 106},
1196 {195, 102},
1197 {195, 95},
1198 {163, 113},
1199 {163, 106},
1200 {163, 102},
1201 {163, 95},
1202 {131, 113},
1203 {131, 106},
1204 {131, 102},
1205 {131, 95},
1206 {99, 113},
1207 {99, 106},
1208 {99, 102},
1209 {99, 95},
1210 {67, 113},
1211 {67, 106},
1212 {67, 102},
1213 {67, 95},
1214 {35, 113},
1215 {35, 106},
1216 {35, 102},
1217 {35, 95},
1218 {3, 113},
1219 {3, 106},
1220 {3, 102},
1221 {3, 95} /* 2.4 GHz, lowest power */
1222 },
1223 {
1224 {251, 127}, /* 5.x GHz, highest power */
1225 {251, 120},
1226 {251, 114},
1227 {219, 119},
1228 {219, 101},
1229 {187, 113},
1230 {187, 102},
1231 {155, 114},
1232 {155, 103},
1233 {123, 117},
1234 {123, 107},
1235 {123, 99},
1236 {123, 92},
1237 {91, 108},
1238 {59, 125},
1239 {59, 118},
1240 {59, 109},
1241 {59, 102},
1242 {59, 96},
1243 {59, 90},
1244 {27, 104},
1245 {27, 98},
1246 {27, 92},
1247 {115, 118},
1248 {115, 111},
1249 {115, 104},
1250 {83, 126},
1251 {83, 121},
1252 {83, 113},
1253 {83, 105},
1254 {83, 99},
1255 {51, 118},
1256 {51, 111},
1257 {51, 104},
1258 {51, 98},
1259 {19, 116},
1260 {19, 109},
1261 {19, 102},
1262 {19, 98},
1263 {19, 93},
1264 {171, 113},
1265 {171, 107},
1266 {171, 99},
1267 {139, 120},
1268 {139, 113},
1269 {139, 107},
1270 {139, 99},
1271 {107, 120},
1272 {107, 113},
1273 {107, 107},
1274 {107, 99},
1275 {75, 120},
1276 {75, 113},
1277 {75, 107},
1278 {75, 99},
1279 {43, 120},
1280 {43, 113},
1281 {43, 107},
1282 {43, 99},
1283 {11, 120},
1284 {11, 113},
1285 {11, 107},
1286 {11, 99},
1287 {131, 107},
1288 {131, 99},
1289 {99, 120},
1290 {99, 113},
1291 {99, 107},
1292 {99, 99},
1293 {67, 120},
1294 {67, 113},
1295 {67, 107},
1296 {67, 99},
1297 {35, 120},
1298 {35, 113},
1299 {35, 107},
1300 {35, 99},
1301 {3, 120} /* 5.x GHz, lowest power */
1302 }
1303 };
1304
1305 static inline u8
il3945_hw_reg_fix_power_idx(int idx)1306 il3945_hw_reg_fix_power_idx(int idx)
1307 {
1308 if (idx < 0)
1309 return 0;
1310 if (idx >= IL_MAX_GAIN_ENTRIES)
1311 return IL_MAX_GAIN_ENTRIES - 1;
1312 return (u8) idx;
1313 }
1314
1315 /* Kick off thermal recalibration check every 60 seconds */
1316 #define REG_RECALIB_PERIOD (60)
1317
1318 /*
1319 * il3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
1320 *
1321 * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
1322 * or 6 Mbit (OFDM) rates.
1323 */
1324 static void
il3945_hw_reg_set_scan_power(struct il_priv * il,u32 scan_tbl_idx,s32 rate_idx,const s8 * clip_pwrs,struct il_channel_info * ch_info,int band_idx)1325 il3945_hw_reg_set_scan_power(struct il_priv *il, u32 scan_tbl_idx, s32 rate_idx,
1326 const s8 *clip_pwrs,
1327 struct il_channel_info *ch_info, int band_idx)
1328 {
1329 struct il3945_scan_power_info *scan_power_info;
1330 s8 power;
1331 u8 power_idx;
1332
1333 scan_power_info = &ch_info->scan_pwr_info[scan_tbl_idx];
1334
1335 /* use this channel group's 6Mbit clipping/saturation pwr,
1336 * but cap at regulatory scan power restriction (set during init
1337 * based on eeprom channel data) for this channel. */
1338 power = min(ch_info->scan_power, clip_pwrs[RATE_6M_IDX_TBL]);
1339
1340 power = min(power, il->tx_power_user_lmt);
1341 scan_power_info->requested_power = power;
1342
1343 /* find difference between new scan *power* and current "normal"
1344 * Tx *power* for 6Mb. Use this difference (x2) to adjust the
1345 * current "normal" temperature-compensated Tx power *idx* for
1346 * this rate (1Mb or 6Mb) to yield new temp-compensated scan power
1347 * *idx*. */
1348 power_idx =
1349 ch_info->power_info[rate_idx].power_table_idx - (power -
1350 ch_info->
1351 power_info
1352 [RATE_6M_IDX_TBL].
1353 requested_power) *
1354 2;
1355
1356 /* store reference idx that we use when adjusting *all* scan
1357 * powers. So we can accommodate user (all channel) or spectrum
1358 * management (single channel) power changes "between" temperature
1359 * feedback compensation procedures.
1360 * don't force fit this reference idx into gain table; it may be a
1361 * negative number. This will help avoid errors when we're at
1362 * the lower bounds (highest gains, for warmest temperatures)
1363 * of the table. */
1364
1365 /* don't exceed table bounds for "real" setting */
1366 power_idx = il3945_hw_reg_fix_power_idx(power_idx);
1367
1368 scan_power_info->power_table_idx = power_idx;
1369 scan_power_info->tpc.tx_gain =
1370 power_gain_table[band_idx][power_idx].tx_gain;
1371 scan_power_info->tpc.dsp_atten =
1372 power_gain_table[band_idx][power_idx].dsp_atten;
1373 }
1374
1375 /*
1376 * il3945_send_tx_power - fill in Tx Power command with gain settings
1377 *
1378 * Configures power settings for all rates for the current channel,
1379 * using values from channel info struct, and send to NIC
1380 */
1381 static int
il3945_send_tx_power(struct il_priv * il)1382 il3945_send_tx_power(struct il_priv *il)
1383 {
1384 int rate_idx, i;
1385 const struct il_channel_info *ch_info = NULL;
1386 struct il3945_txpowertable_cmd txpower = {
1387 .channel = il->active.channel,
1388 };
1389 u16 chan;
1390
1391 if (WARN_ONCE
1392 (test_bit(S_SCAN_HW, &il->status),
1393 "TX Power requested while scanning!\n"))
1394 return -EAGAIN;
1395
1396 chan = le16_to_cpu(il->active.channel);
1397
1398 txpower.band = (il->band == NL80211_BAND_5GHZ) ? 0 : 1;
1399 ch_info = il_get_channel_info(il, il->band, chan);
1400 if (!ch_info) {
1401 IL_ERR("Failed to get channel info for channel %d [%d]\n", chan,
1402 il->band);
1403 return -EINVAL;
1404 }
1405
1406 if (!il_is_channel_valid(ch_info)) {
1407 D_POWER("Not calling TX_PWR_TBL_CMD on " "non-Tx channel.\n");
1408 return 0;
1409 }
1410
1411 /* fill cmd with power settings for all rates for current channel */
1412 /* Fill OFDM rate */
1413 for (rate_idx = IL_FIRST_OFDM_RATE, i = 0;
1414 rate_idx <= IL39_LAST_OFDM_RATE; rate_idx++, i++) {
1415
1416 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1417 txpower.power[i].rate = il3945_rates[rate_idx].plcp;
1418
1419 D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1420 le16_to_cpu(txpower.channel), txpower.band,
1421 txpower.power[i].tpc.tx_gain,
1422 txpower.power[i].tpc.dsp_atten, txpower.power[i].rate);
1423 }
1424 /* Fill CCK rates */
1425 for (rate_idx = IL_FIRST_CCK_RATE; rate_idx <= IL_LAST_CCK_RATE;
1426 rate_idx++, i++) {
1427 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1428 txpower.power[i].rate = il3945_rates[rate_idx].plcp;
1429
1430 D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1431 le16_to_cpu(txpower.channel), txpower.band,
1432 txpower.power[i].tpc.tx_gain,
1433 txpower.power[i].tpc.dsp_atten, txpower.power[i].rate);
1434 }
1435
1436 return il_send_cmd_pdu(il, C_TX_PWR_TBL,
1437 sizeof(struct il3945_txpowertable_cmd),
1438 &txpower);
1439
1440 }
1441
1442 /*
1443 * il3945_hw_reg_set_new_power - Configures power tables at new levels
1444 * @ch_info: Channel to update. Uses power_info.requested_power.
1445 *
1446 * Replace requested_power and base_power_idx ch_info fields for
1447 * one channel.
1448 *
1449 * Called if user or spectrum management changes power preferences.
1450 * Takes into account h/w and modulation limitations (clip power).
1451 *
1452 * This does *not* send anything to NIC, just sets up ch_info for one channel.
1453 *
1454 * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
1455 * properly fill out the scan powers, and actual h/w gain settings,
1456 * and send changes to NIC
1457 */
1458 static int
il3945_hw_reg_set_new_power(struct il_priv * il,struct il_channel_info * ch_info)1459 il3945_hw_reg_set_new_power(struct il_priv *il, struct il_channel_info *ch_info)
1460 {
1461 struct il3945_channel_power_info *power_info;
1462 int power_changed = 0;
1463 int i;
1464 const s8 *clip_pwrs;
1465 int power;
1466
1467 /* Get this chnlgrp's rate-to-max/clip-powers table */
1468 clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers;
1469
1470 /* Get this channel's rate-to-current-power settings table */
1471 power_info = ch_info->power_info;
1472
1473 /* update OFDM Txpower settings */
1474 for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++, ++power_info) {
1475 int delta_idx;
1476
1477 /* limit new power to be no more than h/w capability */
1478 power = min(ch_info->curr_txpow, clip_pwrs[i]);
1479 if (power == power_info->requested_power)
1480 continue;
1481
1482 /* find difference between old and new requested powers,
1483 * update base (non-temp-compensated) power idx */
1484 delta_idx = (power - power_info->requested_power) * 2;
1485 power_info->base_power_idx -= delta_idx;
1486
1487 /* save new requested power value */
1488 power_info->requested_power = power;
1489
1490 power_changed = 1;
1491 }
1492
1493 /* update CCK Txpower settings, based on OFDM 12M setting ...
1494 * ... all CCK power settings for a given channel are the *same*. */
1495 if (power_changed) {
1496 power =
1497 ch_info->power_info[RATE_12M_IDX_TBL].requested_power +
1498 IL_CCK_FROM_OFDM_POWER_DIFF;
1499
1500 /* do all CCK rates' il3945_channel_power_info structures */
1501 for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) {
1502 power_info->requested_power = power;
1503 power_info->base_power_idx =
1504 ch_info->power_info[RATE_12M_IDX_TBL].
1505 base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
1506 ++power_info;
1507 }
1508 }
1509
1510 return 0;
1511 }
1512
1513 /*
1514 * il3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
1515 *
1516 * NOTE: Returned power limit may be less (but not more) than requested,
1517 * based strictly on regulatory (eeprom and spectrum mgt) limitations
1518 * (no consideration for h/w clipping limitations).
1519 */
1520 static int
il3945_hw_reg_get_ch_txpower_limit(struct il_channel_info * ch_info)1521 il3945_hw_reg_get_ch_txpower_limit(struct il_channel_info *ch_info)
1522 {
1523 s8 max_power;
1524
1525 #if 0
1526 /* if we're using TGd limits, use lower of TGd or EEPROM */
1527 if (ch_info->tgd_data.max_power != 0)
1528 max_power =
1529 min(ch_info->tgd_data.max_power,
1530 ch_info->eeprom.max_power_avg);
1531
1532 /* else just use EEPROM limits */
1533 else
1534 #endif
1535 max_power = ch_info->eeprom.max_power_avg;
1536
1537 return min(max_power, ch_info->max_power_avg);
1538 }
1539
1540 /*
1541 * il3945_hw_reg_comp_txpower_temp - Compensate for temperature
1542 *
1543 * Compensate txpower settings of *all* channels for temperature.
1544 * This only accounts for the difference between current temperature
1545 * and the factory calibration temperatures, and bases the new settings
1546 * on the channel's base_power_idx.
1547 *
1548 * If RxOn is "associated", this sends the new Txpower to NIC!
1549 */
1550 static int
il3945_hw_reg_comp_txpower_temp(struct il_priv * il)1551 il3945_hw_reg_comp_txpower_temp(struct il_priv *il)
1552 {
1553 struct il_channel_info *ch_info = NULL;
1554 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1555 int delta_idx;
1556 const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
1557 u8 a_band;
1558 u8 rate_idx;
1559 u8 scan_tbl_idx;
1560 u8 i;
1561 int ref_temp;
1562 int temperature = il->temperature;
1563
1564 if (il->disable_tx_power_cal || test_bit(S_SCANNING, &il->status)) {
1565 /* do not perform tx power calibration */
1566 return 0;
1567 }
1568 /* set up new Tx power info for each and every channel, 2.4 and 5.x */
1569 for (i = 0; i < il->channel_count; i++) {
1570 ch_info = &il->channel_info[i];
1571 a_band = il_is_channel_a_band(ch_info);
1572
1573 /* Get this chnlgrp's factory calibration temperature */
1574 ref_temp = (s16) eeprom->groups[ch_info->group_idx].temperature;
1575
1576 /* get power idx adjustment based on current and factory
1577 * temps */
1578 delta_idx =
1579 il3945_hw_reg_adjust_power_by_temp(temperature, ref_temp);
1580
1581 /* set tx power value for all rates, OFDM and CCK */
1582 for (rate_idx = 0; rate_idx < RATE_COUNT_3945; rate_idx++) {
1583 int power_idx =
1584 ch_info->power_info[rate_idx].base_power_idx;
1585
1586 /* temperature compensate */
1587 power_idx += delta_idx;
1588
1589 /* stay within table range */
1590 power_idx = il3945_hw_reg_fix_power_idx(power_idx);
1591 ch_info->power_info[rate_idx].power_table_idx =
1592 (u8) power_idx;
1593 ch_info->power_info[rate_idx].tpc =
1594 power_gain_table[a_band][power_idx];
1595 }
1596
1597 /* Get this chnlgrp's rate-to-max/clip-powers table */
1598 clip_pwrs =
1599 il->_3945.clip_groups[ch_info->group_idx].clip_powers;
1600
1601 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
1602 for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES;
1603 scan_tbl_idx++) {
1604 s32 actual_idx =
1605 (scan_tbl_idx ==
1606 0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
1607 il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
1608 actual_idx, clip_pwrs,
1609 ch_info, a_band);
1610 }
1611 }
1612
1613 /* send Txpower command for current channel to ucode */
1614 return il->ops->send_tx_power(il);
1615 }
1616
1617 int
il3945_hw_reg_set_txpower(struct il_priv * il,s8 power)1618 il3945_hw_reg_set_txpower(struct il_priv *il, s8 power)
1619 {
1620 struct il_channel_info *ch_info;
1621 s8 max_power;
1622 u8 i;
1623
1624 if (il->tx_power_user_lmt == power) {
1625 D_POWER("Requested Tx power same as current " "limit: %ddBm.\n",
1626 power);
1627 return 0;
1628 }
1629
1630 D_POWER("Setting upper limit clamp to %ddBm.\n", power);
1631 il->tx_power_user_lmt = power;
1632
1633 /* set up new Tx powers for each and every channel, 2.4 and 5.x */
1634
1635 for (i = 0; i < il->channel_count; i++) {
1636 ch_info = &il->channel_info[i];
1637
1638 /* find minimum power of all user and regulatory constraints
1639 * (does not consider h/w clipping limitations) */
1640 max_power = il3945_hw_reg_get_ch_txpower_limit(ch_info);
1641 max_power = min(power, max_power);
1642 if (max_power != ch_info->curr_txpow) {
1643 ch_info->curr_txpow = max_power;
1644
1645 /* this considers the h/w clipping limitations */
1646 il3945_hw_reg_set_new_power(il, ch_info);
1647 }
1648 }
1649
1650 /* update txpower settings for all channels,
1651 * send to NIC if associated. */
1652 il3945_is_temp_calib_needed(il);
1653 il3945_hw_reg_comp_txpower_temp(il);
1654
1655 return 0;
1656 }
1657
1658 static int
il3945_send_rxon_assoc(struct il_priv * il)1659 il3945_send_rxon_assoc(struct il_priv *il)
1660 {
1661 int rc = 0;
1662 struct il_rx_pkt *pkt;
1663 struct il3945_rxon_assoc_cmd rxon_assoc;
1664 struct il_host_cmd cmd = {
1665 .id = C_RXON_ASSOC,
1666 .len = sizeof(rxon_assoc),
1667 .flags = CMD_WANT_SKB,
1668 .data = &rxon_assoc,
1669 };
1670 const struct il_rxon_cmd *rxon1 = &il->staging;
1671 const struct il_rxon_cmd *rxon2 = &il->active;
1672
1673 if (rxon1->flags == rxon2->flags &&
1674 rxon1->filter_flags == rxon2->filter_flags &&
1675 rxon1->cck_basic_rates == rxon2->cck_basic_rates &&
1676 rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) {
1677 D_INFO("Using current RXON_ASSOC. Not resending.\n");
1678 return 0;
1679 }
1680
1681 rxon_assoc.flags = il->staging.flags;
1682 rxon_assoc.filter_flags = il->staging.filter_flags;
1683 rxon_assoc.ofdm_basic_rates = il->staging.ofdm_basic_rates;
1684 rxon_assoc.cck_basic_rates = il->staging.cck_basic_rates;
1685 rxon_assoc.reserved = 0;
1686
1687 rc = il_send_cmd_sync(il, &cmd);
1688 if (rc)
1689 return rc;
1690
1691 pkt = (struct il_rx_pkt *)cmd.reply_page;
1692 if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
1693 IL_ERR("Bad return from C_RXON_ASSOC command\n");
1694 rc = -EIO;
1695 }
1696
1697 il_free_pages(il, cmd.reply_page);
1698
1699 return rc;
1700 }
1701
1702 /*
1703 * il3945_commit_rxon - commit staging_rxon to hardware
1704 *
1705 * The RXON command in staging_rxon is committed to the hardware and
1706 * the active_rxon structure is updated with the new data. This
1707 * function correctly transitions out of the RXON_ASSOC_MSK state if
1708 * a HW tune is required based on the RXON structure changes.
1709 */
1710 int
il3945_commit_rxon(struct il_priv * il)1711 il3945_commit_rxon(struct il_priv *il)
1712 {
1713 /* cast away the const for active_rxon in this function */
1714 struct il3945_rxon_cmd *active_rxon = (void *)&il->active;
1715 struct il3945_rxon_cmd *staging_rxon = (void *)&il->staging;
1716 int rc = 0;
1717 bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
1718
1719 if (test_bit(S_EXIT_PENDING, &il->status))
1720 return -EINVAL;
1721
1722 if (!il_is_alive(il))
1723 return -1;
1724
1725 /* always get timestamp with Rx frame */
1726 staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
1727
1728 /* select antenna */
1729 staging_rxon->flags &= ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
1730 staging_rxon->flags |= il3945_get_antenna_flags(il);
1731
1732 rc = il_check_rxon_cmd(il);
1733 if (rc) {
1734 IL_ERR("Invalid RXON configuration. Not committing.\n");
1735 return -EINVAL;
1736 }
1737
1738 /* If we don't need to send a full RXON, we can use
1739 * il3945_rxon_assoc_cmd which is used to reconfigure filter
1740 * and other flags for the current radio configuration. */
1741 if (!il_full_rxon_required(il)) {
1742 rc = il_send_rxon_assoc(il);
1743 if (rc) {
1744 IL_ERR("Error setting RXON_ASSOC "
1745 "configuration (%d).\n", rc);
1746 return rc;
1747 }
1748
1749 memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
1750 /*
1751 * We do not commit tx power settings while channel changing,
1752 * do it now if tx power changed.
1753 */
1754 il_set_tx_power(il, il->tx_power_next, false);
1755 return 0;
1756 }
1757
1758 /* If we are currently associated and the new config requires
1759 * an RXON_ASSOC and the new config wants the associated mask enabled,
1760 * we must clear the associated from the active configuration
1761 * before we apply the new config */
1762 if (il_is_associated(il) && new_assoc) {
1763 D_INFO("Toggling associated bit on current RXON\n");
1764 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1765
1766 /*
1767 * reserved4 and 5 could have been filled by the iwlcore code.
1768 * Let's clear them before pushing to the 3945.
1769 */
1770 active_rxon->reserved4 = 0;
1771 active_rxon->reserved5 = 0;
1772 rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd),
1773 &il->active);
1774
1775 /* If the mask clearing failed then we set
1776 * active_rxon back to what it was previously */
1777 if (rc) {
1778 active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
1779 IL_ERR("Error clearing ASSOC_MSK on current "
1780 "configuration (%d).\n", rc);
1781 return rc;
1782 }
1783 il_clear_ucode_stations(il);
1784 il_restore_stations(il);
1785 }
1786
1787 D_INFO("Sending RXON\n" "* with%s RXON_FILTER_ASSOC_MSK\n"
1788 "* channel = %d\n" "* bssid = %pM\n", (new_assoc ? "" : "out"),
1789 le16_to_cpu(staging_rxon->channel), staging_rxon->bssid_addr);
1790
1791 /*
1792 * reserved4 and 5 could have been filled by the iwlcore code.
1793 * Let's clear them before pushing to the 3945.
1794 */
1795 staging_rxon->reserved4 = 0;
1796 staging_rxon->reserved5 = 0;
1797
1798 il_set_rxon_hwcrypto(il, !il3945_mod_params.sw_crypto);
1799
1800 /* Apply the new configuration */
1801 rc = il_send_cmd_pdu(il, C_RXON, sizeof(struct il3945_rxon_cmd),
1802 staging_rxon);
1803 if (rc) {
1804 IL_ERR("Error setting new configuration (%d).\n", rc);
1805 return rc;
1806 }
1807
1808 memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
1809
1810 if (!new_assoc) {
1811 il_clear_ucode_stations(il);
1812 il_restore_stations(il);
1813 }
1814
1815 /* If we issue a new RXON command which required a tune then we must
1816 * send a new TXPOWER command or we won't be able to Tx any frames */
1817 rc = il_set_tx_power(il, il->tx_power_next, true);
1818 if (rc) {
1819 IL_ERR("Error setting Tx power (%d).\n", rc);
1820 return rc;
1821 }
1822
1823 /* Init the hardware's rate fallback order based on the band */
1824 rc = il3945_init_hw_rate_table(il);
1825 if (rc) {
1826 IL_ERR("Error setting HW rate table: %02X\n", rc);
1827 return -EIO;
1828 }
1829
1830 return 0;
1831 }
1832
1833 /*
1834 * il3945_reg_txpower_periodic - called when time to check our temperature.
1835 *
1836 * -- reset periodic timer
1837 * -- see if temp has changed enough to warrant re-calibration ... if so:
1838 * -- correct coeffs for temp (can reset temp timer)
1839 * -- save this temp as "last",
1840 * -- send new set of gain settings to NIC
1841 * NOTE: This should continue working, even when we're not associated,
1842 * so we can keep our internal table of scan powers current. */
1843 void
il3945_reg_txpower_periodic(struct il_priv * il)1844 il3945_reg_txpower_periodic(struct il_priv *il)
1845 {
1846 /* This will kick in the "brute force"
1847 * il3945_hw_reg_comp_txpower_temp() below */
1848 if (!il3945_is_temp_calib_needed(il))
1849 goto reschedule;
1850
1851 /* Set up a new set of temp-adjusted TxPowers, send to NIC.
1852 * This is based *only* on current temperature,
1853 * ignoring any previous power measurements */
1854 il3945_hw_reg_comp_txpower_temp(il);
1855
1856 reschedule:
1857 queue_delayed_work(il->workqueue, &il->_3945.thermal_periodic,
1858 REG_RECALIB_PERIOD * HZ);
1859 }
1860
1861 static void
il3945_bg_reg_txpower_periodic(struct work_struct * work)1862 il3945_bg_reg_txpower_periodic(struct work_struct *work)
1863 {
1864 struct il_priv *il = container_of(work, struct il_priv,
1865 _3945.thermal_periodic.work);
1866
1867 mutex_lock(&il->mutex);
1868 if (test_bit(S_EXIT_PENDING, &il->status) || il->txq == NULL)
1869 goto out;
1870
1871 il3945_reg_txpower_periodic(il);
1872 out:
1873 mutex_unlock(&il->mutex);
1874 }
1875
1876 /*
1877 * il3945_hw_reg_get_ch_grp_idx - find the channel-group idx (0-4) for channel.
1878 *
1879 * This function is used when initializing channel-info structs.
1880 *
1881 * NOTE: These channel groups do *NOT* match the bands above!
1882 * These channel groups are based on factory-tested channels;
1883 * on A-band, EEPROM's "group frequency" entries represent the top
1884 * channel in each group 1-4. Group 5 All B/G channels are in group 0.
1885 */
1886 static u16
il3945_hw_reg_get_ch_grp_idx(struct il_priv * il,const struct il_channel_info * ch_info)1887 il3945_hw_reg_get_ch_grp_idx(struct il_priv *il,
1888 const struct il_channel_info *ch_info)
1889 {
1890 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1891 struct il3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0];
1892 u8 group;
1893 u16 group_idx = 0; /* based on factory calib frequencies */
1894 u8 grp_channel;
1895
1896 /* Find the group idx for the channel ... don't use idx 1(?) */
1897 if (il_is_channel_a_band(ch_info)) {
1898 for (group = 1; group < 5; group++) {
1899 grp_channel = ch_grp[group].group_channel;
1900 if (ch_info->channel <= grp_channel) {
1901 group_idx = group;
1902 break;
1903 }
1904 }
1905 /* group 4 has a few channels *above* its factory cal freq */
1906 if (group == 5)
1907 group_idx = 4;
1908 } else
1909 group_idx = 0; /* 2.4 GHz, group 0 */
1910
1911 D_POWER("Chnl %d mapped to grp %d\n", ch_info->channel, group_idx);
1912 return group_idx;
1913 }
1914
1915 /*
1916 * il3945_hw_reg_get_matched_power_idx - Interpolate to get nominal idx
1917 *
1918 * Interpolate to get nominal (i.e. at factory calibration temperature) idx
1919 * into radio/DSP gain settings table for requested power.
1920 */
1921 static int
il3945_hw_reg_get_matched_power_idx(struct il_priv * il,s8 requested_power,s32 setting_idx,s32 * new_idx)1922 il3945_hw_reg_get_matched_power_idx(struct il_priv *il, s8 requested_power,
1923 s32 setting_idx, s32 *new_idx)
1924 {
1925 const struct il3945_eeprom_txpower_group *chnl_grp = NULL;
1926 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1927 s32 idx0, idx1;
1928 s32 power = 2 * requested_power;
1929 s32 i;
1930 const struct il3945_eeprom_txpower_sample *samples;
1931 s32 gains0, gains1;
1932 s32 res;
1933 s32 denominator;
1934
1935 chnl_grp = &eeprom->groups[setting_idx];
1936 samples = chnl_grp->samples;
1937 for (i = 0; i < 5; i++) {
1938 if (power == samples[i].power) {
1939 *new_idx = samples[i].gain_idx;
1940 return 0;
1941 }
1942 }
1943
1944 if (power > samples[1].power) {
1945 idx0 = 0;
1946 idx1 = 1;
1947 } else if (power > samples[2].power) {
1948 idx0 = 1;
1949 idx1 = 2;
1950 } else if (power > samples[3].power) {
1951 idx0 = 2;
1952 idx1 = 3;
1953 } else {
1954 idx0 = 3;
1955 idx1 = 4;
1956 }
1957
1958 denominator = (s32) samples[idx1].power - (s32) samples[idx0].power;
1959 if (denominator == 0)
1960 return -EINVAL;
1961 gains0 = (s32) samples[idx0].gain_idx * (1 << 19);
1962 gains1 = (s32) samples[idx1].gain_idx * (1 << 19);
1963 res =
1964 gains0 + (gains1 - gains0) * ((s32) power -
1965 (s32) samples[idx0].power) /
1966 denominator + (1 << 18);
1967 *new_idx = res >> 19;
1968 return 0;
1969 }
1970
1971 static void
il3945_hw_reg_init_channel_groups(struct il_priv * il)1972 il3945_hw_reg_init_channel_groups(struct il_priv *il)
1973 {
1974 u32 i;
1975 s32 rate_idx;
1976 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
1977 const struct il3945_eeprom_txpower_group *group;
1978
1979 D_POWER("Initializing factory calib info from EEPROM\n");
1980
1981 for (i = 0; i < IL_NUM_TX_CALIB_GROUPS; i++) {
1982 s8 *clip_pwrs; /* table of power levels for each rate */
1983 s8 satur_pwr; /* saturation power for each chnl group */
1984 group = &eeprom->groups[i];
1985
1986 /* sanity check on factory saturation power value */
1987 if (group->saturation_power < 40) {
1988 IL_WARN("Error: saturation power is %d, "
1989 "less than minimum expected 40\n",
1990 group->saturation_power);
1991 return;
1992 }
1993
1994 /*
1995 * Derive requested power levels for each rate, based on
1996 * hardware capabilities (saturation power for band).
1997 * Basic value is 3dB down from saturation, with further
1998 * power reductions for highest 3 data rates. These
1999 * backoffs provide headroom for high rate modulation
2000 * power peaks, without too much distortion (clipping).
2001 */
2002 /* we'll fill in this array with h/w max power levels */
2003 clip_pwrs = (s8 *) il->_3945.clip_groups[i].clip_powers;
2004
2005 /* divide factory saturation power by 2 to find -3dB level */
2006 satur_pwr = (s8) (group->saturation_power >> 1);
2007
2008 /* fill in channel group's nominal powers for each rate */
2009 for (rate_idx = 0; rate_idx < RATE_COUNT_3945;
2010 rate_idx++, clip_pwrs++) {
2011 switch (rate_idx) {
2012 case RATE_36M_IDX_TBL:
2013 if (i == 0) /* B/G */
2014 *clip_pwrs = satur_pwr;
2015 else /* A */
2016 *clip_pwrs = satur_pwr - 5;
2017 break;
2018 case RATE_48M_IDX_TBL:
2019 if (i == 0)
2020 *clip_pwrs = satur_pwr - 7;
2021 else
2022 *clip_pwrs = satur_pwr - 10;
2023 break;
2024 case RATE_54M_IDX_TBL:
2025 if (i == 0)
2026 *clip_pwrs = satur_pwr - 9;
2027 else
2028 *clip_pwrs = satur_pwr - 12;
2029 break;
2030 default:
2031 *clip_pwrs = satur_pwr;
2032 break;
2033 }
2034 }
2035 }
2036 }
2037
2038 /*
2039 * il3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
2040 *
2041 * Second pass (during init) to set up il->channel_info
2042 *
2043 * Set up Tx-power settings in our channel info database for each VALID
2044 * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
2045 * and current temperature.
2046 *
2047 * Since this is based on current temperature (at init time), these values may
2048 * not be valid for very long, but it gives us a starting/default point,
2049 * and allows us to active (i.e. using Tx) scan.
2050 *
2051 * This does *not* write values to NIC, just sets up our internal table.
2052 */
2053 int
il3945_txpower_set_from_eeprom(struct il_priv * il)2054 il3945_txpower_set_from_eeprom(struct il_priv *il)
2055 {
2056 struct il_channel_info *ch_info = NULL;
2057 struct il3945_channel_power_info *pwr_info;
2058 struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
2059 int delta_idx;
2060 u8 rate_idx;
2061 u8 scan_tbl_idx;
2062 const s8 *clip_pwrs; /* array of power levels for each rate */
2063 u8 gain, dsp_atten;
2064 s8 power;
2065 u8 pwr_idx, base_pwr_idx, a_band;
2066 u8 i;
2067 int temperature;
2068
2069 /* save temperature reference,
2070 * so we can determine next time to calibrate */
2071 temperature = il3945_hw_reg_txpower_get_temperature(il);
2072 il->last_temperature = temperature;
2073
2074 il3945_hw_reg_init_channel_groups(il);
2075
2076 /* initialize Tx power info for each and every channel, 2.4 and 5.x */
2077 for (i = 0, ch_info = il->channel_info; i < il->channel_count;
2078 i++, ch_info++) {
2079 a_band = il_is_channel_a_band(ch_info);
2080 if (!il_is_channel_valid(ch_info))
2081 continue;
2082
2083 /* find this channel's channel group (*not* "band") idx */
2084 ch_info->group_idx = il3945_hw_reg_get_ch_grp_idx(il, ch_info);
2085
2086 /* Get this chnlgrp's rate->max/clip-powers table */
2087 clip_pwrs =
2088 il->_3945.clip_groups[ch_info->group_idx].clip_powers;
2089
2090 /* calculate power idx *adjustment* value according to
2091 * diff between current temperature and factory temperature */
2092 delta_idx =
2093 il3945_hw_reg_adjust_power_by_temp(temperature,
2094 eeprom->groups[ch_info->
2095 group_idx].
2096 temperature);
2097
2098 D_POWER("Delta idx for channel %d: %d [%d]\n", ch_info->channel,
2099 delta_idx, temperature + IL_TEMP_CONVERT);
2100
2101 /* set tx power value for all OFDM rates */
2102 for (rate_idx = 0; rate_idx < IL_OFDM_RATES; rate_idx++) {
2103 s32 power_idx;
2104 int rc;
2105
2106 /* use channel group's clip-power table,
2107 * but don't exceed channel's max power */
2108 s8 pwr = min(ch_info->max_power_avg,
2109 clip_pwrs[rate_idx]);
2110
2111 pwr_info = &ch_info->power_info[rate_idx];
2112
2113 /* get base (i.e. at factory-measured temperature)
2114 * power table idx for this rate's power */
2115 rc = il3945_hw_reg_get_matched_power_idx(il, pwr,
2116 ch_info->
2117 group_idx,
2118 &power_idx);
2119 if (rc) {
2120 IL_ERR("Invalid power idx\n");
2121 return rc;
2122 }
2123 pwr_info->base_power_idx = (u8) power_idx;
2124
2125 /* temperature compensate */
2126 power_idx += delta_idx;
2127
2128 /* stay within range of gain table */
2129 power_idx = il3945_hw_reg_fix_power_idx(power_idx);
2130
2131 /* fill 1 OFDM rate's il3945_channel_power_info struct */
2132 pwr_info->requested_power = pwr;
2133 pwr_info->power_table_idx = (u8) power_idx;
2134 pwr_info->tpc.tx_gain =
2135 power_gain_table[a_band][power_idx].tx_gain;
2136 pwr_info->tpc.dsp_atten =
2137 power_gain_table[a_band][power_idx].dsp_atten;
2138 }
2139
2140 /* set tx power for CCK rates, based on OFDM 12 Mbit settings */
2141 pwr_info = &ch_info->power_info[RATE_12M_IDX_TBL];
2142 power = pwr_info->requested_power + IL_CCK_FROM_OFDM_POWER_DIFF;
2143 pwr_idx = pwr_info->power_table_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
2144 base_pwr_idx =
2145 pwr_info->base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
2146
2147 /* stay within table range */
2148 pwr_idx = il3945_hw_reg_fix_power_idx(pwr_idx);
2149 gain = power_gain_table[a_band][pwr_idx].tx_gain;
2150 dsp_atten = power_gain_table[a_band][pwr_idx].dsp_atten;
2151
2152 /* fill each CCK rate's il3945_channel_power_info structure
2153 * NOTE: All CCK-rate Txpwrs are the same for a given chnl!
2154 * NOTE: CCK rates start at end of OFDM rates! */
2155 for (rate_idx = 0; rate_idx < IL_CCK_RATES; rate_idx++) {
2156 pwr_info =
2157 &ch_info->power_info[rate_idx + IL_OFDM_RATES];
2158 pwr_info->requested_power = power;
2159 pwr_info->power_table_idx = pwr_idx;
2160 pwr_info->base_power_idx = base_pwr_idx;
2161 pwr_info->tpc.tx_gain = gain;
2162 pwr_info->tpc.dsp_atten = dsp_atten;
2163 }
2164
2165 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
2166 for (scan_tbl_idx = 0; scan_tbl_idx < IL_NUM_SCAN_RATES;
2167 scan_tbl_idx++) {
2168 s32 actual_idx =
2169 (scan_tbl_idx ==
2170 0) ? RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
2171 il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
2172 actual_idx, clip_pwrs,
2173 ch_info, a_band);
2174 }
2175 }
2176
2177 return 0;
2178 }
2179
2180 int
il3945_hw_rxq_stop(struct il_priv * il)2181 il3945_hw_rxq_stop(struct il_priv *il)
2182 {
2183 int ret;
2184
2185 _il_wr(il, FH39_RCSR_CONFIG(0), 0);
2186 ret = _il_poll_bit(il, FH39_RSSR_STATUS,
2187 FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
2188 FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
2189 1000);
2190 if (ret < 0)
2191 IL_ERR("Can't stop Rx DMA.\n");
2192
2193 return 0;
2194 }
2195
2196 int
il3945_hw_tx_queue_init(struct il_priv * il,struct il_tx_queue * txq)2197 il3945_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq)
2198 {
2199 int txq_id = txq->q.id;
2200
2201 struct il3945_shared *shared_data = il->_3945.shared_virt;
2202
2203 shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32) txq->q.dma_addr);
2204
2205 il_wr(il, FH39_CBCC_CTRL(txq_id), 0);
2206 il_wr(il, FH39_CBCC_BASE(txq_id), 0);
2207
2208 il_wr(il, FH39_TCSR_CONFIG(txq_id),
2209 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
2210 FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
2211 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
2212 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
2213 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
2214
2215 /* fake read to flush all prev. writes */
2216 _il_rd(il, FH39_TSSR_CBB_BASE);
2217
2218 return 0;
2219 }
2220
2221 /*
2222 * HCMD utils
2223 */
2224 static u16
il3945_get_hcmd_size(u8 cmd_id,u16 len)2225 il3945_get_hcmd_size(u8 cmd_id, u16 len)
2226 {
2227 switch (cmd_id) {
2228 case C_RXON:
2229 return sizeof(struct il3945_rxon_cmd);
2230 case C_POWER_TBL:
2231 return sizeof(struct il3945_powertable_cmd);
2232 default:
2233 return len;
2234 }
2235 }
2236
2237 static u16
il3945_build_addsta_hcmd(const struct il_addsta_cmd * cmd,u8 * data)2238 il3945_build_addsta_hcmd(const struct il_addsta_cmd *cmd, u8 * data)
2239 {
2240 struct il3945_addsta_cmd *addsta = (struct il3945_addsta_cmd *)data;
2241 addsta->mode = cmd->mode;
2242 memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
2243 memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo));
2244 addsta->station_flags = cmd->station_flags;
2245 addsta->station_flags_msk = cmd->station_flags_msk;
2246 addsta->tid_disable_tx = cpu_to_le16(0);
2247 addsta->rate_n_flags = cmd->rate_n_flags;
2248 addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
2249 addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
2250 addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
2251
2252 return (u16) sizeof(struct il3945_addsta_cmd);
2253 }
2254
2255 static int
il3945_add_bssid_station(struct il_priv * il,const u8 * addr,u8 * sta_id_r)2256 il3945_add_bssid_station(struct il_priv *il, const u8 * addr, u8 * sta_id_r)
2257 {
2258 int ret;
2259 u8 sta_id;
2260 unsigned long flags;
2261
2262 if (sta_id_r)
2263 *sta_id_r = IL_INVALID_STATION;
2264
2265 ret = il_add_station_common(il, addr, 0, NULL, &sta_id);
2266 if (ret) {
2267 IL_ERR("Unable to add station %pM\n", addr);
2268 return ret;
2269 }
2270
2271 if (sta_id_r)
2272 *sta_id_r = sta_id;
2273
2274 spin_lock_irqsave(&il->sta_lock, flags);
2275 il->stations[sta_id].used |= IL_STA_LOCAL;
2276 spin_unlock_irqrestore(&il->sta_lock, flags);
2277
2278 return 0;
2279 }
2280
2281 static int
il3945_manage_ibss_station(struct il_priv * il,struct ieee80211_vif * vif,bool add)2282 il3945_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif,
2283 bool add)
2284 {
2285 struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
2286 int ret;
2287
2288 if (add) {
2289 ret =
2290 il3945_add_bssid_station(il, vif->bss_conf.bssid,
2291 &vif_priv->ibss_bssid_sta_id);
2292 if (ret)
2293 return ret;
2294
2295 il3945_sync_sta(il, vif_priv->ibss_bssid_sta_id,
2296 (il->band ==
2297 NL80211_BAND_5GHZ) ? RATE_6M_PLCP :
2298 RATE_1M_PLCP);
2299 il3945_rate_scale_init(il->hw, vif_priv->ibss_bssid_sta_id);
2300
2301 return 0;
2302 }
2303
2304 return il_remove_station(il, vif_priv->ibss_bssid_sta_id,
2305 vif->bss_conf.bssid);
2306 }
2307
2308 /*
2309 * il3945_init_hw_rate_table - Initialize the hardware rate fallback table
2310 */
2311 int
il3945_init_hw_rate_table(struct il_priv * il)2312 il3945_init_hw_rate_table(struct il_priv *il)
2313 {
2314 int rc, i, idx, prev_idx;
2315 struct il3945_rate_scaling_cmd rate_cmd = {
2316 .reserved = {0, 0, 0},
2317 };
2318 struct il3945_rate_scaling_info *table = rate_cmd.table;
2319
2320 for (i = 0; i < ARRAY_SIZE(il3945_rates); i++) {
2321 idx = il3945_rates[i].table_rs_idx;
2322
2323 table[idx].rate_n_flags = cpu_to_le16(il3945_rates[i].plcp);
2324 table[idx].try_cnt = il->retry_rate;
2325 prev_idx = il3945_get_prev_ieee_rate(i);
2326 table[idx].next_rate_idx = il3945_rates[prev_idx].table_rs_idx;
2327 }
2328
2329 switch (il->band) {
2330 case NL80211_BAND_5GHZ:
2331 D_RATE("Select A mode rate scale\n");
2332 /* If one of the following CCK rates is used,
2333 * have it fall back to the 6M OFDM rate */
2334 for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++)
2335 table[i].next_rate_idx =
2336 il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
2337
2338 /* Don't fall back to CCK rates */
2339 table[RATE_12M_IDX_TBL].next_rate_idx = RATE_9M_IDX_TBL;
2340
2341 /* Don't drop out of OFDM rates */
2342 table[RATE_6M_IDX_TBL].next_rate_idx =
2343 il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
2344 break;
2345
2346 case NL80211_BAND_2GHZ:
2347 D_RATE("Select B/G mode rate scale\n");
2348 /* If an OFDM rate is used, have it fall back to the
2349 * 1M CCK rates */
2350
2351 if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
2352 il_is_associated(il)) {
2353
2354 idx = IL_FIRST_CCK_RATE;
2355 for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL; i++)
2356 table[i].next_rate_idx =
2357 il3945_rates[idx].table_rs_idx;
2358
2359 idx = RATE_11M_IDX_TBL;
2360 /* CCK shouldn't fall back to OFDM... */
2361 table[idx].next_rate_idx = RATE_5M_IDX_TBL;
2362 }
2363 break;
2364
2365 default:
2366 WARN_ON(1);
2367 break;
2368 }
2369
2370 /* Update the rate scaling for control frame Tx */
2371 rate_cmd.table_id = 0;
2372 rc = il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd);
2373 if (rc)
2374 return rc;
2375
2376 /* Update the rate scaling for data frame Tx */
2377 rate_cmd.table_id = 1;
2378 return il_send_cmd_pdu(il, C_RATE_SCALE, sizeof(rate_cmd), &rate_cmd);
2379 }
2380
2381 /* Called when initializing driver */
2382 int
il3945_hw_set_hw_params(struct il_priv * il)2383 il3945_hw_set_hw_params(struct il_priv *il)
2384 {
2385 memset((void *)&il->hw_params, 0, sizeof(struct il_hw_params));
2386
2387 il->_3945.shared_virt =
2388 dma_alloc_coherent(&il->pci_dev->dev, sizeof(struct il3945_shared),
2389 &il->_3945.shared_phys, GFP_KERNEL);
2390 if (!il->_3945.shared_virt)
2391 return -ENOMEM;
2392
2393 il->hw_params.bcast_id = IL3945_BROADCAST_ID;
2394
2395 /* Assign number of Usable TX queues */
2396 il->hw_params.max_txq_num = il->cfg->num_of_queues;
2397
2398 il->hw_params.tfd_size = sizeof(struct il3945_tfd);
2399 il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_3K);
2400 il->hw_params.max_rxq_size = RX_QUEUE_SIZE;
2401 il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
2402 il->hw_params.max_stations = IL3945_STATION_COUNT;
2403
2404 il->sta_key_max_num = STA_KEY_MAX_NUM;
2405
2406 il->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
2407 il->hw_params.max_beacon_itrvl = IL39_MAX_UCODE_BEACON_INTERVAL;
2408 il->hw_params.beacon_time_tsf_bits = IL3945_EXT_BEACON_TIME_POS;
2409
2410 return 0;
2411 }
2412
2413 unsigned int
il3945_hw_get_beacon_cmd(struct il_priv * il,struct il3945_frame * frame,u8 rate)2414 il3945_hw_get_beacon_cmd(struct il_priv *il, struct il3945_frame *frame,
2415 u8 rate)
2416 {
2417 struct il3945_tx_beacon_cmd *tx_beacon_cmd;
2418 unsigned int frame_size;
2419
2420 tx_beacon_cmd = (struct il3945_tx_beacon_cmd *)&frame->u;
2421 memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
2422
2423 tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id;
2424 tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2425
2426 frame_size =
2427 il3945_fill_beacon_frame(il, tx_beacon_cmd->frame,
2428 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
2429
2430 BUG_ON(frame_size > MAX_MPDU_SIZE);
2431 tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size);
2432
2433 tx_beacon_cmd->tx.rate = rate;
2434 tx_beacon_cmd->tx.tx_flags =
2435 (TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK);
2436
2437 /* supp_rates[0] == OFDM start at IL_FIRST_OFDM_RATE */
2438 tx_beacon_cmd->tx.supp_rates[0] =
2439 (IL_OFDM_BASIC_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF;
2440
2441 tx_beacon_cmd->tx.supp_rates[1] = (IL_CCK_BASIC_RATES_MASK & 0xF);
2442
2443 return sizeof(struct il3945_tx_beacon_cmd) + frame_size;
2444 }
2445
2446 void
il3945_hw_handler_setup(struct il_priv * il)2447 il3945_hw_handler_setup(struct il_priv *il)
2448 {
2449 il->handlers[C_TX] = il3945_hdl_tx;
2450 il->handlers[N_3945_RX] = il3945_hdl_rx;
2451 }
2452
2453 void
il3945_hw_setup_deferred_work(struct il_priv * il)2454 il3945_hw_setup_deferred_work(struct il_priv *il)
2455 {
2456 INIT_DELAYED_WORK(&il->_3945.thermal_periodic,
2457 il3945_bg_reg_txpower_periodic);
2458 }
2459
2460 void
il3945_hw_cancel_deferred_work(struct il_priv * il)2461 il3945_hw_cancel_deferred_work(struct il_priv *il)
2462 {
2463 cancel_delayed_work(&il->_3945.thermal_periodic);
2464 }
2465
2466 /* check contents of special bootstrap uCode SRAM */
2467 static int
il3945_verify_bsm(struct il_priv * il)2468 il3945_verify_bsm(struct il_priv *il)
2469 {
2470 __le32 *image = il->ucode_boot.v_addr;
2471 u32 len = il->ucode_boot.len;
2472 u32 reg;
2473 u32 val;
2474
2475 D_INFO("Begin verify bsm\n");
2476
2477 /* verify BSM SRAM contents */
2478 val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
2479 for (reg = BSM_SRAM_LOWER_BOUND; reg < BSM_SRAM_LOWER_BOUND + len;
2480 reg += sizeof(u32), image++) {
2481 val = il_rd_prph(il, reg);
2482 if (val != le32_to_cpu(*image)) {
2483 IL_ERR("BSM uCode verification failed at "
2484 "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
2485 BSM_SRAM_LOWER_BOUND, reg - BSM_SRAM_LOWER_BOUND,
2486 len, val, le32_to_cpu(*image));
2487 return -EIO;
2488 }
2489 }
2490
2491 D_INFO("BSM bootstrap uCode image OK\n");
2492
2493 return 0;
2494 }
2495
2496 /******************************************************************************
2497 *
2498 * EEPROM related functions
2499 *
2500 ******************************************************************************/
2501
2502 /*
2503 * Clear the OWNER_MSK, to establish driver (instead of uCode running on
2504 * embedded controller) as EEPROM reader; each read is a series of pulses
2505 * to/from the EEPROM chip, not a single event, so even reads could conflict
2506 * if they weren't arbitrated by some ownership mechanism. Here, the driver
2507 * simply claims ownership, which should be safe when this function is called
2508 * (i.e. before loading uCode!).
2509 */
2510 static int
il3945_eeprom_acquire_semaphore(struct il_priv * il)2511 il3945_eeprom_acquire_semaphore(struct il_priv *il)
2512 {
2513 _il_clear_bit(il, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
2514 return 0;
2515 }
2516
2517 static void
il3945_eeprom_release_semaphore(struct il_priv * il)2518 il3945_eeprom_release_semaphore(struct il_priv *il)
2519 {
2520 return;
2521 }
2522
2523 /*
2524 * il3945_load_bsm - Load bootstrap instructions
2525 *
2526 * BSM operation:
2527 *
2528 * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
2529 * in special SRAM that does not power down during RFKILL. When powering back
2530 * up after power-saving sleeps (or during initial uCode load), the BSM loads
2531 * the bootstrap program into the on-board processor, and starts it.
2532 *
2533 * The bootstrap program loads (via DMA) instructions and data for a new
2534 * program from host DRAM locations indicated by the host driver in the
2535 * BSM_DRAM_* registers. Once the new program is loaded, it starts
2536 * automatically.
2537 *
2538 * When initializing the NIC, the host driver points the BSM to the
2539 * "initialize" uCode image. This uCode sets up some internal data, then
2540 * notifies host via "initialize alive" that it is complete.
2541 *
2542 * The host then replaces the BSM_DRAM_* pointer values to point to the
2543 * normal runtime uCode instructions and a backup uCode data cache buffer
2544 * (filled initially with starting data values for the on-board processor),
2545 * then triggers the "initialize" uCode to load and launch the runtime uCode,
2546 * which begins normal operation.
2547 *
2548 * When doing a power-save shutdown, runtime uCode saves data SRAM into
2549 * the backup data cache in DRAM before SRAM is powered down.
2550 *
2551 * When powering back up, the BSM loads the bootstrap program. This reloads
2552 * the runtime uCode instructions and the backup data cache into SRAM,
2553 * and re-launches the runtime uCode from where it left off.
2554 */
2555 static int
il3945_load_bsm(struct il_priv * il)2556 il3945_load_bsm(struct il_priv *il)
2557 {
2558 __le32 *image = il->ucode_boot.v_addr;
2559 u32 len = il->ucode_boot.len;
2560 dma_addr_t pinst;
2561 dma_addr_t pdata;
2562 u32 inst_len;
2563 u32 data_len;
2564 int rc;
2565 int i;
2566 u32 done;
2567 u32 reg_offset;
2568
2569 D_INFO("Begin load bsm\n");
2570
2571 /* make sure bootstrap program is no larger than BSM's SRAM size */
2572 if (len > IL39_MAX_BSM_SIZE)
2573 return -EINVAL;
2574
2575 /* Tell bootstrap uCode where to find the "Initialize" uCode
2576 * in host DRAM ... host DRAM physical address bits 31:0 for 3945.
2577 * NOTE: il3945_initialize_alive_start() will replace these values,
2578 * after the "initialize" uCode has run, to point to
2579 * runtime/protocol instructions and backup data cache. */
2580 pinst = il->ucode_init.p_addr;
2581 pdata = il->ucode_init_data.p_addr;
2582 inst_len = il->ucode_init.len;
2583 data_len = il->ucode_init_data.len;
2584
2585 il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
2586 il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
2587 il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
2588 il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
2589
2590 /* Fill BSM memory with bootstrap instructions */
2591 for (reg_offset = BSM_SRAM_LOWER_BOUND;
2592 reg_offset < BSM_SRAM_LOWER_BOUND + len;
2593 reg_offset += sizeof(u32), image++)
2594 _il_wr_prph(il, reg_offset, le32_to_cpu(*image));
2595
2596 rc = il3945_verify_bsm(il);
2597 if (rc)
2598 return rc;
2599
2600 /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
2601 il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
2602 il_wr_prph(il, BSM_WR_MEM_DST_REG, IL39_RTC_INST_LOWER_BOUND);
2603 il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
2604
2605 /* Load bootstrap code into instruction SRAM now,
2606 * to prepare to load "initialize" uCode */
2607 il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
2608
2609 /* Wait for load of bootstrap uCode to finish */
2610 for (i = 0; i < 100; i++) {
2611 done = il_rd_prph(il, BSM_WR_CTRL_REG);
2612 if (!(done & BSM_WR_CTRL_REG_BIT_START))
2613 break;
2614 udelay(10);
2615 }
2616 if (i < 100)
2617 D_INFO("BSM write complete, poll %d iterations\n", i);
2618 else {
2619 IL_ERR("BSM write did not complete!\n");
2620 return -EIO;
2621 }
2622
2623 /* Enable future boot loads whenever power management unit triggers it
2624 * (e.g. when powering back up after power-save shutdown) */
2625 il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
2626
2627 return 0;
2628 }
2629
2630 const struct il_ops il3945_ops = {
2631 .txq_attach_buf_to_tfd = il3945_hw_txq_attach_buf_to_tfd,
2632 .txq_free_tfd = il3945_hw_txq_free_tfd,
2633 .txq_init = il3945_hw_tx_queue_init,
2634 .load_ucode = il3945_load_bsm,
2635 .dump_nic_error_log = il3945_dump_nic_error_log,
2636 .apm_init = il3945_apm_init,
2637 .send_tx_power = il3945_send_tx_power,
2638 .is_valid_rtc_data_addr = il3945_hw_valid_rtc_data_addr,
2639 .eeprom_acquire_semaphore = il3945_eeprom_acquire_semaphore,
2640 .eeprom_release_semaphore = il3945_eeprom_release_semaphore,
2641
2642 .rxon_assoc = il3945_send_rxon_assoc,
2643 .commit_rxon = il3945_commit_rxon,
2644
2645 .get_hcmd_size = il3945_get_hcmd_size,
2646 .build_addsta_hcmd = il3945_build_addsta_hcmd,
2647 .request_scan = il3945_request_scan,
2648 .post_scan = il3945_post_scan,
2649
2650 .post_associate = il3945_post_associate,
2651 .config_ap = il3945_config_ap,
2652 .manage_ibss_station = il3945_manage_ibss_station,
2653
2654 .send_led_cmd = il3945_send_led_cmd,
2655 };
2656
2657 static const struct il_cfg il3945_bg_cfg = {
2658 .name = "3945BG",
2659 .fw_name_pre = IL3945_FW_PRE,
2660 .ucode_api_max = IL3945_UCODE_API_MAX,
2661 .ucode_api_min = IL3945_UCODE_API_MIN,
2662 .sku = IL_SKU_G,
2663 .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
2664 .mod_params = &il3945_mod_params,
2665 .led_mode = IL_LED_BLINK,
2666
2667 .eeprom_size = IL3945_EEPROM_IMG_SIZE,
2668 .num_of_queues = IL39_NUM_QUEUES,
2669 .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
2670 .set_l0s = false,
2671 .use_bsm = true,
2672 .led_compensation = 64,
2673 .wd_timeout = IL_DEF_WD_TIMEOUT,
2674
2675 .regulatory_bands = {
2676 EEPROM_REGULATORY_BAND_1_CHANNELS,
2677 EEPROM_REGULATORY_BAND_2_CHANNELS,
2678 EEPROM_REGULATORY_BAND_3_CHANNELS,
2679 EEPROM_REGULATORY_BAND_4_CHANNELS,
2680 EEPROM_REGULATORY_BAND_5_CHANNELS,
2681 EEPROM_REGULATORY_BAND_NO_HT40,
2682 EEPROM_REGULATORY_BAND_NO_HT40,
2683 },
2684 };
2685
2686 static const struct il_cfg il3945_abg_cfg = {
2687 .name = "3945ABG",
2688 .fw_name_pre = IL3945_FW_PRE,
2689 .ucode_api_max = IL3945_UCODE_API_MAX,
2690 .ucode_api_min = IL3945_UCODE_API_MIN,
2691 .sku = IL_SKU_A | IL_SKU_G,
2692 .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
2693 .mod_params = &il3945_mod_params,
2694 .led_mode = IL_LED_BLINK,
2695
2696 .eeprom_size = IL3945_EEPROM_IMG_SIZE,
2697 .num_of_queues = IL39_NUM_QUEUES,
2698 .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
2699 .set_l0s = false,
2700 .use_bsm = true,
2701 .led_compensation = 64,
2702 .wd_timeout = IL_DEF_WD_TIMEOUT,
2703
2704 .regulatory_bands = {
2705 EEPROM_REGULATORY_BAND_1_CHANNELS,
2706 EEPROM_REGULATORY_BAND_2_CHANNELS,
2707 EEPROM_REGULATORY_BAND_3_CHANNELS,
2708 EEPROM_REGULATORY_BAND_4_CHANNELS,
2709 EEPROM_REGULATORY_BAND_5_CHANNELS,
2710 EEPROM_REGULATORY_BAND_NO_HT40,
2711 EEPROM_REGULATORY_BAND_NO_HT40,
2712 },
2713 };
2714
2715 const struct pci_device_id il3945_hw_card_ids[] = {
2716 {IL_PCI_DEVICE(0x4222, 0x1005, il3945_bg_cfg)},
2717 {IL_PCI_DEVICE(0x4222, 0x1034, il3945_bg_cfg)},
2718 {IL_PCI_DEVICE(0x4222, 0x1044, il3945_bg_cfg)},
2719 {IL_PCI_DEVICE(0x4227, 0x1014, il3945_bg_cfg)},
2720 {IL_PCI_DEVICE(0x4222, PCI_ANY_ID, il3945_abg_cfg)},
2721 {IL_PCI_DEVICE(0x4227, PCI_ANY_ID, il3945_abg_cfg)},
2722 {0}
2723 };
2724
2725 MODULE_DEVICE_TABLE(pci, il3945_hw_card_ids);
2726