1-- **************************************************************************** 2-- 3-- Host Operating System Information 4-- Management Information Base for SNMP Network Management 5-- 6-- 7-- Copyright 1993,2016 Hewlett Packard Enterprise Development, L.P. 8-- 9-- Hewlett Packard Enterprise Development LP shall not be liable for technical or 10-- editorial errors or omissions contained herein. The information in 11-- this document is provided "as is" without warranty of any kind and 12-- is subject to change without notice. The warranties for HP products 13-- are set forth in the express limited warranty statements 14-- accompanying such products. Nothing herein should be construed as 15-- constituting an additional warranty. 16-- 17-- Confidential computer software. Valid license from HP required for 18-- possession, use or copying. Consistent with FAR 12.211 and 12.212, 19-- Commercial Computer Software, Computer Software Documentation, and 20-- Technical Data for Commercial Items are licensed to the U.S. 21-- Government under vendor's standard commercial license. 22-- 23-- Refer to the READMIB.RDM file for more information about the 24-- organization of the information in the Compaq Enterprise. 25-- 26-- The Compaq Enterprise number is 232. 27-- The ASN.1 prefix to, and including the Compaq Enterprise is: 28-- 1.3.6.1.4.1.232 29-- 30-- **************************************************************************** 31 32 33CPQHOST-MIB DEFINITIONS ::= BEGIN 34 35 IMPORTS 36 enterprises FROM RFC1155-SMI 37 IpAddress FROM RFC1155-SMI 38 DisplayString FROM RFC1213-MIB 39 OBJECT-TYPE FROM RFC-1212 40 TRAP-TYPE FROM RFC-1215 41 sysName FROM RFC1213-MIB; 42 43 compaq OBJECT IDENTIFIER ::= { enterprises 232 } 44 cpqHostOs OBJECT IDENTIFIER ::= { compaq 11 } 45 cpqHoMibRev OBJECT IDENTIFIER ::= { cpqHostOs 1 } 46 cpqHoComponent OBJECT IDENTIFIER ::= { cpqHostOs 2 } 47 48 cpqHoInterface OBJECT IDENTIFIER ::= { cpqHoComponent 1 } 49 cpqHoInfo OBJECT IDENTIFIER ::= { cpqHoComponent 2 } 50 cpqHoUtil OBJECT IDENTIFIER ::= { cpqHoComponent 3 } 51 cpqHoFileSys OBJECT IDENTIFIER ::= { cpqHoComponent 4 } 52-- The cpqHoIfPhysMap group has been deprecated. 53 cpqHoIfPhysMap OBJECT IDENTIFIER ::= { cpqHoComponent 5 } 54 cpqHoSWRunning OBJECT IDENTIFIER ::= { cpqHoComponent 6 } 55 cpqHoSwVer OBJECT IDENTIFIER ::= { cpqHoComponent 7 } 56 cpqHoGeneric OBJECT IDENTIFIER ::= { cpqHoComponent 8 } 57 cpqHoSwPerf OBJECT IDENTIFIER ::= { cpqHoComponent 9 } 58 cpqHoSystemStatus OBJECT IDENTIFIER ::= { cpqHoComponent 10 } 59 cpqHoTrapInfo OBJECT IDENTIFIER ::= { cpqHoComponent 11 } 60 cpqHoClients OBJECT IDENTIFIER ::= { cpqHoComponent 12 } 61 cpqHoMemory OBJECT IDENTIFIER ::= { cpqHoComponent 13 } 62 cpqHoFwVer OBJECT IDENTIFIER ::= { cpqHoComponent 14 } 63 cpqHoHWInfo OBJECT IDENTIFIER ::= { cpqHoComponent 15 } 64 cpqPwrThreshold OBJECT IDENTIFIER ::= { cpqHoComponent 16 } 65 66 cpqHoOsCommon OBJECT IDENTIFIER ::= { cpqHoInterface 4 } 67 68-- **************************************************************************** 69-- Host OS Information MIB Revision 70-- ================================ 71-- 72-- The compaq enterprise (1.3.6.1.4.1.232) 73-- cpqHostOs Group (1.3.6.1.4.1.232.11) 74-- cpqHoMibRev Group (1.3.6.1.4.1.232.11.1) 75-- 76-- Implementation of the cpqHoMibRev group is mandatory for all agents 77-- supporting the Host OS MIB. 78-- 79-- A Management Agent conforming to this document will return a 80-- cpqHoMibRevMajor of one (1) and a cpqHoMibRevMinor of forty three (43). 81 82-- 83-- **************************************************************************** 84 85 cpqHoMibRevMajor OBJECT-TYPE 86 SYNTAX INTEGER (1..65535) 87 ACCESS read-only 88 STATUS mandatory 89 DESCRIPTION 90 "The Major Revision level of the MIB. 91 92 A change in the major revision level represents a major change 93 in the architecture of the MIB. A change in the major revision 94 level may indicate a significant change in the information 95 supported and/or the meaning of the supported information. 96 Correct interpretation of data may require a MIB document with 97 the same major revision level." 98 ::= { cpqHoMibRev 1 } 99 100 cpqHoMibRevMinor OBJECT-TYPE 101 SYNTAX INTEGER (0..65535) 102 ACCESS read-only 103 STATUS mandatory 104 DESCRIPTION 105 "The Minor Revision level of the MIB. 106 107 A change in the minor revision level may represent some minor 108 additional support, no changes to any pre-existing information 109 has occurred." 110 ::= { cpqHoMibRev 2 } 111 112 cpqHoMibCondition OBJECT-TYPE 113 SYNTAX INTEGER { 114 unknown(1), 115 ok(2), -- default state 116 degraded(3), 117 failed(4) 118 } 119 ACCESS read-only 120 STATUS mandatory 121 DESCRIPTION 122 "The overall condition. 123 124 This object represents the overall status of the server's host 125 system represented by this MIB." 126 ::= { cpqHoMibRev 3 } 127 128-- **************************************************************************** 129-- Host OS Common 130-- ============== 131-- 132-- The compaq enterprise (1.3.6.1.4.1.232) 133-- cpqHostOs Group (1.3.6.1.4.1.232.11) 134-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 135-- cpqHoInterface Group (1.3.6.1.4.1.232.11.2.1) 136-- cpqHoOsCommon Group (1.3.6.1.4.1.232.11.2.1.4) 137-- 138-- 139-- Implementation of the cpqHoOsCommon group is mandatory for all 140-- agents that support the Host OS MIB. 141-- 142-- **************************************************************************** 143 144 cpqHoOsCommonPollFreq OBJECT-TYPE 145 SYNTAX INTEGER (0..65535) 146 ACCESS read-write 147 STATUS mandatory 148 DESCRIPTION 149 "The Insight Agent's polling frequency. 150 151 The frequency, in seconds, at which the Insight Agent requests 152 information from the device driver. A frequency of zero (0) 153 indicates that the Insight Agent retrieves the information upon 154 request of a management station, it does not poll the device 155 driver at a specific interval. 156 157 If the poll frequency is zero (0) all attempts to write to this 158 object will fail. If the poll frequency is non-zero, 159 setting this value will change the polling frequency of the 160 Insight Agent. Setting the poll frequency to zero (0) will 161 always fail. An agent may choose to fail any request to change 162 the poll frequency to a value that would severely impact system 163 performance." 164 ::= { cpqHoOsCommon 1 } 165 166-- **************************************************************************** 167-- Host OS Common Module Table 168-- =========================== 169-- 170-- The compaq enterprise (1.3.6.1.4.1.232) 171-- cpqHostOs Group (1.3.6.1.4.1.232.11) 172-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 173-- cpqHoInterface Group (1.3.6.1.4.1.232.11.2.1) 174-- cpqHoOsCommon Group (1.3.6.1.4.1.232.11.2.1.4) 175-- cpqHoOsCommonModuleTable (1.3.6.1.4.1.232.11.2.1.4.2) deprecated 176-- 177-- **************************************************************************** 178 179 cpqHoOsCommonModuleTable OBJECT-TYPE 180 SYNTAX SEQUENCE OF CpqHoOsCommonModuleEntry 181 ACCESS not-accessible 182 STATUS deprecated 183 DESCRIPTION 184 "A table of software modules that provide an interface to the 185 device this MIB describes." 186 ::= { cpqHoOsCommon 2 } 187 188 cpqHoOsCommonModuleEntry OBJECT-TYPE 189 SYNTAX CpqHoOsCommonModuleEntry 190 ACCESS not-accessible 191 STATUS deprecated 192 DESCRIPTION 193 "A description of a software module that provides an interface 194 to the device this MIB describes." 195 INDEX { cpqHoOsCommonModuleIndex } 196 ::= { cpqHoOsCommonModuleTable 1 } 197 198 CpqHoOsCommonModuleEntry ::= SEQUENCE { 199 cpqHoOsCommonModuleIndex INTEGER, 200 cpqHoOsCommonModuleName DisplayString, 201 cpqHoOsCommonModuleVersion DisplayString, 202 cpqHoOsCommonModuleDate OCTET STRING, 203 cpqHoOsCommonModulePurpose DisplayString 204 } 205 206 cpqHoOsCommonModuleIndex OBJECT-TYPE 207 SYNTAX INTEGER (0..255) 208 ACCESS read-only 209 STATUS deprecated 210 DESCRIPTION 211 "A unique index for this module description." 212 ::= { cpqHoOsCommonModuleEntry 1 } 213 214 cpqHoOsCommonModuleName OBJECT-TYPE 215 SYNTAX DisplayString (SIZE (0..255)) 216 ACCESS read-only 217 STATUS deprecated 218 DESCRIPTION 219 "The module name." 220 ::= { cpqHoOsCommonModuleEntry 2 } 221 222 cpqHoOsCommonModuleVersion OBJECT-TYPE 223 SYNTAX DisplayString (SIZE (0..5)) 224 ACCESS read-only 225 STATUS deprecated 226 DESCRIPTION 227 "The module version in XX.YY format. 228 229 Where XX is the major version number and YY is the minor version 230 number. This field will be null (size 0) string if the agent 231 cannot provide the module version." 232 ::= { cpqHoOsCommonModuleEntry 3 } 233 234 cpqHoOsCommonModuleDate OBJECT-TYPE 235 SYNTAX OCTET STRING (SIZE (7)) 236 ACCESS read-only 237 STATUS deprecated 238 DESCRIPTION 239 "The module date. 240 241 field octets contents range 242 ===== ====== ======= ===== 243 1 1-2 year 0..65536 244 2 3 month 1..12 245 3 4 day 1..31 246 4 5 hour 0..23 247 5 6 minute 0..59 248 6 7 second 0..60 249 (use 60 for leap-second) 250 251 252 This field will be set to year = 0 if the agent cannot provide 253 the module date. The hour, minute, and second field will be set 254 to zero (0) if they are not relevant. The year field is set 255 with the most significant octet first." 256 ::= { cpqHoOsCommonModuleEntry 4 } 257 258 cpqHoOsCommonModulePurpose OBJECT-TYPE 259 SYNTAX DisplayString (SIZE (0..255)) 260 ACCESS read-only 261 STATUS deprecated 262 DESCRIPTION 263 "The purpose of the module described in this entry." 264 ::= { cpqHoOsCommonModuleEntry 5 } 265 266-- **************************************************************************** 267-- Host OS Information Group 268-- ========================= 269-- 270-- The compaq enterprise (1.3.6.1.4.1.232) 271-- cpqHostOs Group (1.3.6.1.4.1.232.11) 272-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 273-- cpqHoInfo Group (1.3.6.1.4.1.232.11.2.2) 274-- 275-- 276-- The cpqHoInfo group describes some general information about the 277-- host OS. 278-- 279-- Implementation of the cpqHoInfo group is mandatory for all 280-- agents supporting the Host OS MIB. 281-- 282-- **************************************************************************** 283 284 285 cpqHoName OBJECT-TYPE 286 SYNTAX DisplayString (SIZE (0..255)) 287 ACCESS read-only 288 STATUS mandatory 289 DESCRIPTION 290 "The name of the host operating system (OS)." 291 ::= { cpqHoInfo 1 } 292 293 cpqHoVersion OBJECT-TYPE 294 SYNTAX DisplayString (SIZE (0..255)) 295 ACCESS read-only 296 STATUS mandatory 297 DESCRIPTION 298 "The version of the host OS." 299 ::= { cpqHoInfo 2 } 300 301 cpqHoDesc OBJECT-TYPE 302 SYNTAX DisplayString (SIZE (0..255)) 303 ACCESS read-only 304 STATUS mandatory 305 DESCRIPTION 306 "A further description of the host OS." 307 ::= { cpqHoInfo 3 } 308 309 cpqHoOsType OBJECT-TYPE 310 SYNTAX INTEGER { 311 other(1), 312 netware(2), -- Novell NetWare 313 windowsnt(3), -- Microsoft Windows NT 314 sco-unix(4), -- SCO OpenServer 315 unixware(5), -- SCO UnixWare 316 os-2(6), -- IBM OS/2 317 ms-dos(7), -- Microsoft DOS 318 dos-windows(8), -- Microsoft DOS + Microsoft Windows 319 windows95(9), -- Microsoft Windows 95 320 windows98(10), -- Microsoft Windows 98 321 open-vms(11), -- Open VMS 322 nsk(12), -- Non Stop Kernel 323 windowsCE(13), -- Microsoft Windows CE 324 linux(14), -- Linux 325 windows2000(15), -- Microsoft Windows 2000 326 tru64UNIX(16), -- Tru64 UNIX 327 windows2003(17), -- Microsoft Windows Server 2003 328 windows2003-x64(18), -- Microsoft Windows Server 2003 x64 Edition 329 solaris(19), -- Sun Solaris 330 windows2003-ia64(20), -- Microsoft Windows Server 2003 for Itanium-based Systems 331 windows2008(21), -- Microsoft Windows Server 2008 332 windows2008-x64(22), -- Microsoft Windows Server 2008 x64 Edition 333 windows2008-ia64(23), -- Microsoft Windows Server 2008 for Itanium-based Systems 334 vmware-esx(24), -- VMware ESX Classic 335 vmware-esxi(25), -- VMware ESXi 336 windows2012(26), -- Microsoft Windows 2012 Server 337 windows7(27), -- Microsoft Windows 7 338 windows7-x64(28), -- Microsoft Windows 7 64-bit 339 windows8(29), -- Microsoft Windows 8 340 windows8-x64(30), -- Microsoft Windows 8 64-bit 341 windows81(31), -- Microsoft Windows 8.1 342 windows81-x64(32), -- Microsoft Windows 8.1 64-bit 343 windowsxp(33), -- Microsoft Windows XP 344 windowsxp-x64(34), -- Microsoft Windows XP 64-Bit 345 windowsvista(35), -- Microsoft Windows Vista 346 windowsvista-x64(36), -- Microsoft Windows Vista 64-Bit 347 windows2008-r2(37), -- Microsoft Windows Server 2008 R2 348 windows2012-r2(38), -- Microsoft Windows Server 2012 R2 349 rhel(39), -- RedHat Enterprise Linux 350 rhel-64(40), -- RedHat Enterprise Linux 64-Bit 351 solaris-64(41), -- Solaris 64-Bit 352 sles(42), -- SUSE Linux Enterprise Server 353 sles-64(43), -- SUSE Linux Enterprise Server 64-Bit 354 ubuntu(44), -- Ubuntu 355 ubuntu-64(45), -- Ubuntu 64-Bit 356 debian(46), -- Debian 357 debian-64(47), -- Debian 64-Bit 358 linux-64-bit(48), -- Linux 64-Bit 359 other-64-bit(49), -- Other 64-Bit 360 centos-32bit(50), -- CentOS 32-bit 361 centos-64bit(51), -- CentOS 64-bit 362 oracle-linux32(52), -- Oracle Linux 32-bit 363 oracle-linux64(53), -- Oracle Linux 64-bit 364 apple-osx(54), -- Apple OS X 365 windows2016(55), -- Microsoft Windows Server 2016 366 nanoserver(56) -- Nano Server 367 } 368 ACCESS read-only 369 STATUS mandatory 370 DESCRIPTION 371 "Host Operating system enumeration." 372 ::= { cpqHoInfo 4 } 373 374 cpqHoTelnet OBJECT-TYPE 375 SYNTAX INTEGER { 376 other(1), 377 available(2), 378 notavailable(3) -- default 379 } 380 ACCESS read-only 381 STATUS mandatory 382 DESCRIPTION 383 "Telnet on socket 23 is available." 384-- 385-- This variable specifies the availability of telnet. Only socket 23 is 386-- checked for telnet services. 387-- 388 ::= { cpqHoInfo 5 } 389 390 cpqHoSystemRole OBJECT-TYPE 391 SYNTAX DisplayString (SIZE (0..64)) 392 ACCESS read-write 393 STATUS mandatory 394 DESCRIPTION 395 "The system role. 396 397 This is a settable free form text field intended to be assigned 398 by a remote console briefly describing the system's function." 399 ::= { cpqHoInfo 6 } 400 401 cpqHoSystemRoleDetail OBJECT-TYPE 402 SYNTAX DisplayString (SIZE (0..512)) 403 ACCESS read-write 404 STATUS mandatory 405 DESCRIPTION 406 "The system detailed description. 407 408 This is a settable free form text field intended to be assigned 409 by a remote console describing the system function in detail." 410 ::= { cpqHoInfo 7 } 411 412 cpqHoCrashDumpState OBJECT-TYPE 413 SYNTAX INTEGER { 414 completememorydump(1), 415 kernelmemorydump(2), 416 smallmemorydump(3), 417 none(4) 418 } 419 ACCESS read-only 420 STATUS mandatory 421 DESCRIPTION 422 "Crash dump state. 423 Value of 'Unknown (-1)' is returned when crash dump state could 424 not be determined." 425 ::= { cpqHoInfo 8 } 426 427 cpqHoCrashDumpCondition OBJECT-TYPE 428 SYNTAX INTEGER { 429 other(1), -- (Crash Dump settings unknown) or (Crash dump monitoring is disabled) 430 ok(2), -- (Crash dump settings OK) and (paging file size >= minimum) and (free disk space >= minimum) 431 degraded(3), -- (Crash dump settings none) or (paging file size < minimum) or (free disk space < minimum) 432 failed(4) -- N/A 433 } 434 ACCESS read-only 435 STATUS mandatory 436 DESCRIPTION 437 "The condition of the Crash dump configuration." 438 ::= { cpqHoInfo 9 } 439 440 cpqHoCrashDumpMonitoring OBJECT-TYPE 441 SYNTAX INTEGER { 442 enabled(1), -- Enable crash dump monitoring. 443 disabled(2) -- Disable crash dump monitoring. 444 } 445 ACCESS read-write 446 STATUS optional 447 DESCRIPTION 448 "Enable/disable crash dump monitoring. 449 If crash dump monitoring is enabled both crash dump TRAP's 450 are generated and crash dump condition is updated. 451 If crash dump monitoring is disabled, no crash dump TRAP 452 is generated and the crash dump condition is set to 453 other" 454 ::= { cpqHoInfo 10 } 455 456 cpqHoMaxLogicalCPUSupported OBJECT-TYPE 457 SYNTAX INTEGER (0..65535) 458 ACCESS read-only 459 STATUS optional 460 DESCRIPTION 461 "Maximum number of logical CPUs supported by Operating System." 462 ::= { cpqHoInfo 11 } 463 464 cpqHoSystemName OBJECT-TYPE 465 SYNTAX DisplayString (SIZE (0..255)) 466 ACCESS read-only 467 STATUS mandatory 468 DESCRIPTION 469 "Full computer name of the host" 470 ::= { cpqHoInfo 12 } 471 472 cpqHosysDescr OBJECT-TYPE 473 SYNTAX DisplayString (SIZE (0..255)) 474 ACCESS read-only 475 STATUS optional 476 DESCRIPTION 477 "The value that would be returned in the RFC-1213 478 sysDescr MIB element. It should include the full 479 name and version identification of the system's 480 hardware type, software operating-system, and 481 networking software. It is mandatory that this only 482 contain printable ASCII characters." 483 ::= { cpqHoInfo 13} 484 485-- **************************************************************************** 486-- Host OS CPU Utilization Table 487-- ============================= 488-- 489-- The compaq enterprise (1.3.6.1.4.1.232) 490-- cpqHostOs Group (1.3.6.1.4.1.232.11) 491-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 492-- cpqHoUtil Group (1.3.6.1.4.1.232.11.2.3) 493-- cpqHoCpuUtilTable (1.3.6.1.4.1.232.11.2.3.1) 494-- 495-- 496-- The cpqHoUtil group contains measures of system utilization. 497-- 498-- Implementation of the cpqHoUtil group is mandatory for all agents 499-- that support the Host OS MIB. 500-- 501-- **************************************************************************** 502 503 504 505 cpqHoCpuUtilTable OBJECT-TYPE 506 SYNTAX SEQUENCE OF CpqHoCpuUtilEntry 507 ACCESS not-accessible 508 STATUS mandatory 509 DESCRIPTION 510 "A table of CPU utilization entries." 511 ::= { cpqHoUtil 1 } 512 513 cpqHoCpuUtilEntry OBJECT-TYPE 514 SYNTAX CpqHoCpuUtilEntry 515 ACCESS not-accessible 516 STATUS mandatory 517 DESCRIPTION 518 "A description of a CPU's utilization." 519 INDEX { cpqHoCpuUtilUnitIndex } 520 ::= { cpqHoCpuUtilTable 1 } 521 522 CpqHoCpuUtilEntry ::= SEQUENCE { 523 cpqHoCpuUtilUnitIndex INTEGER, 524 cpqHoCpuUtilMin INTEGER, 525 cpqHoCpuUtilFiveMin INTEGER, 526 cpqHoCpuUtilThirtyMin INTEGER, 527 cpqHoCpuUtilHour INTEGER, 528 cpqHoCpuUtilHwLocation DisplayString 529 } 530 531 cpqHoCpuUtilUnitIndex OBJECT-TYPE 532 SYNTAX INTEGER (0..65535) 533 ACCESS read-only 534 STATUS mandatory 535 DESCRIPTION 536 "This number uniquely specifies a processor unit. 537 538 A processing unit may be a set of processing chips that are 539 on the same board or for other reasons work together as a unit. 540 The main processor unit (if such a concept is valid for this 541 machine) will always have the lowest (first) index." 542 ::= { cpqHoCpuUtilEntry 1 } 543 544 cpqHoCpuUtilMin OBJECT-TYPE 545 SYNTAX INTEGER 546 ACCESS read-only 547 STATUS mandatory 548 DESCRIPTION 549 "The CPU utilization as a percentage of the theoretical 550 maximum during the last minute. A value of -1 indicates 551 that no CPU utilization information is available for this 552 processor." 553 ::= { cpqHoCpuUtilEntry 2 } 554 555 cpqHoCpuUtilFiveMin OBJECT-TYPE 556 SYNTAX INTEGER 557 ACCESS read-only 558 STATUS mandatory 559 DESCRIPTION 560 "The CPU utilization as a percentage of the theoretical 561 maximum during the last five minutes. A value of -1 indicates 562 that no CPU utilization information is available for this 563 processor." 564 ::= { cpqHoCpuUtilEntry 3 } 565 566 cpqHoCpuUtilThirtyMin OBJECT-TYPE 567 SYNTAX INTEGER 568 ACCESS read-only 569 STATUS mandatory 570 DESCRIPTION 571 "The CPU utilization as a percentage of the theoretical 572 maximum during the last thirty minutes. A value of -1 indicates 573 that no CPU utilization information is available for this 574 processor." 575 ::= { cpqHoCpuUtilEntry 4 } 576 577 cpqHoCpuUtilHour OBJECT-TYPE 578 SYNTAX INTEGER 579 ACCESS read-only 580 STATUS mandatory 581 DESCRIPTION 582 "The CPU utilization as a percentage of the theoretical 583 maximum during the last hour. A value of -1 indicates 584 that no CPU utilization information is available for this 585 processor." 586 ::= { cpqHoCpuUtilEntry 5 } 587 588 cpqHoCpuUtilHwLocation OBJECT-TYPE 589 SYNTAX DisplayString (SIZE (0..255)) 590 ACCESS read-only 591 STATUS optional 592 DESCRIPTION 593 "A text description of the hardware location, on complex 594 multi SBB hardware only, for the CPU. 595 A NULL string indicates that the hardware location could not 596 be determined or is irrelevant." 597 ::= { cpqHoCpuUtilEntry 6 } 598 599 600-- **************************************************************************** 601-- Host OS File System Table 602-- ========================= 603-- 604-- The compaq enterprise (1.3.6.1.4.1.232) 605-- cpqHostOs Group (1.3.6.1.4.1.232.11) 606-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 607-- cpqHoFileSys Group (1.3.6.1.4.1.232.11.2.4) 608-- cpqHoFileSysTable (1.3.6.1.4.1.232.11.2.4.1) 609-- 610-- The cpqHoFileSys group contains configuration and status information 611-- about the file system. 612-- 613-- **************************************************************************** 614 615 616 617 cpqHoFileSysTable OBJECT-TYPE 618 SYNTAX SEQUENCE OF CpqHoFileSysEntry 619 ACCESS not-accessible 620 STATUS mandatory 621 DESCRIPTION 622 "A table of file system descriptions." 623 ::= { cpqHoFileSys 1 } 624 625 cpqHoFileSysEntry OBJECT-TYPE 626 SYNTAX CpqHoFileSysEntry 627 ACCESS not-accessible 628 STATUS mandatory 629 DESCRIPTION 630 "A file system description." 631 INDEX { cpqHoFileSysIndex } 632 ::= { cpqHoFileSysTable 1 } 633 634 CpqHoFileSysEntry ::= SEQUENCE { 635 cpqHoFileSysIndex INTEGER, 636 cpqHoFileSysDesc DisplayString, 637 cpqHoFileSysSpaceTotal INTEGER, 638 cpqHoFileSysSpaceUsed INTEGER, 639 cpqHoFileSysPercentSpaceUsed INTEGER, 640 cpqHoFileSysAllocUnitsTotal INTEGER, 641 cpqHoFileSysAllocUnitsUsed INTEGER, 642 cpqHoFileSysStatus INTEGER, 643 cpqHoFileSysShortDesc DisplayString 644 } 645 646 cpqHoFileSysIndex OBJECT-TYPE 647 SYNTAX INTEGER (0..65535) 648 ACCESS read-only 649 STATUS mandatory 650 DESCRIPTION 651 "An index that uniquely specifies this entry." 652 ::= { cpqHoFileSysEntry 1 } 653 654 cpqHoFileSysDesc OBJECT-TYPE 655 SYNTAX DisplayString (SIZE (0..255)) 656 ACCESS read-only 657 STATUS mandatory 658 DESCRIPTION 659 "A description of the file system include the GUID." 660 ::= { cpqHoFileSysEntry 2 } 661 662 cpqHoFileSysSpaceTotal OBJECT-TYPE 663 SYNTAX INTEGER 664 ACCESS read-only 665 STATUS mandatory 666 DESCRIPTION 667 "The file system size in megabytes. 668 669 This item will be set to -1 if the agent is unable to determine 670 this information." 671 ::= { cpqHoFileSysEntry 3 } 672 673 cpqHoFileSysSpaceUsed OBJECT-TYPE 674 SYNTAX INTEGER 675 ACCESS read-only 676 STATUS mandatory 677 DESCRIPTION 678 "The megabytes of file system space currently in use. 679 680 This item will be set to -1 if the agent is unable to determine 681 this information." 682 ::= { cpqHoFileSysEntry 4 } 683 684 685 cpqHoFileSysPercentSpaceUsed OBJECT-TYPE 686 SYNTAX INTEGER 687 ACCESS read-only 688 STATUS mandatory 689 DESCRIPTION 690 "The percent of file system space currently in use. 691 This item will be set to -1 if this information is not 692 available." 693 694 ::= { cpqHoFileSysEntry 5 } 695 696 cpqHoFileSysAllocUnitsTotal OBJECT-TYPE 697 SYNTAX INTEGER 698 ACCESS read-only 699 STATUS mandatory 700 DESCRIPTION 701 "The total number of files (directory entries) that can be 702 stored on the file system if a limit exists other than 703 total space used. This item will be set to -1 if no such 704 limit exists." 705 ::= { cpqHoFileSysEntry 6 } 706 707 cpqHoFileSysAllocUnitsUsed OBJECT-TYPE 708 SYNTAX INTEGER 709 ACCESS read-only 710 STATUS mandatory 711 DESCRIPTION 712 "The number of files (directory entries) on this file system. 713 This item will be set to -1 if the agent does not determine this 714 information." 715 ::= { cpqHoFileSysEntry 7 } 716 717 cpqHoFileSysStatus OBJECT-TYPE 718 SYNTAX INTEGER { 719 unknown(1), 720 ok(2), -- default state 721 degraded(3), 722 failed(4) 723 } 724 ACCESS read-only 725 STATUS mandatory 726 DESCRIPTION 727 "The Threshold Status. 728 729 This object represent the status of the Filesystem threshold." 730 ::= { cpqHoFileSysEntry 8 } 731 732 cpqHoFileSysShortDesc OBJECT-TYPE 733 SYNTAX DisplayString (SIZE (0..255)) 734 ACCESS read-only 735 STATUS mandatory 736 DESCRIPTION 737 "A description of the file system." 738 ::= { cpqHoFileSysEntry 9 } 739 740-- **************************************************************************** 741-- Host OS File System Table 742-- ========================= 743-- 744-- The compaq enterprise (1.3.6.1.4.1.232) 745-- cpqHostOs Group (1.3.6.1.4.1.232.11) 746-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 747-- cpqHoFileSys Group (1.3.6.1.4.1.232.11.2.4) 748-- cpqHoFileSysCondition (1.3.6.1.4.1.232.11.2.4.2) 749-- 750-- The cpqHoFileSys group contains overall condition of Filesystem Threshold 751-- 752-- **************************************************************************** 753 cpqHoFileSysCondition OBJECT-TYPE 754 SYNTAX INTEGER { 755 unknown(1), 756 ok(2), -- default state 757 degraded(3), 758 failed(4) 759 } 760 ACCESS read-only 761 STATUS mandatory 762 DESCRIPTION 763 "The overall condition of File System Threshold. 764 765 This object represents the overall status of the server's 766 File System Threshold." 767 ::= { cpqHoFileSys 2 } 768 769-- **************************************************************************** 770-- Host OS Interface Physical Map Table 771-- ==================================== 772-- 773-- The compaq enterprise (1.3.6.1.4.1.232) 774-- cpqHostOs Group (1.3.6.1.4.1.232.11) 775-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 776-- cpqHoIfPhysMap Group (1.3.6.1.4.1.232.11.2.5) deprecated 777-- cpqHoIfPhysMapTable (1.3.6.1.4.1.232.11.2.5.1) deprecated 778-- 779-- 780-- The cpqHoIfPhysMap group contains information to map interface numbers 781-- in the MIB-II interface group to the physical interface cards that 782-- implement the interface. 783-- 784-- Implementation of the cpqHoIfPhysMap group is mandatory for all agents 785-- that support the Host OS MIB. 786-- 787-- **************************************************************************** 788 789 cpqHoIfPhysMapTable OBJECT-TYPE 790 SYNTAX SEQUENCE OF CpqHoIfPhysMapEntry 791 ACCESS not-accessible 792 STATUS deprecated 793 DESCRIPTION 794 "A table of interface to physical hardware mappings." 795 ::= { cpqHoIfPhysMap 1 } 796 797 cpqHoIfPhysMapEntry OBJECT-TYPE 798 SYNTAX CpqHoIfPhysMapEntry 799 ACCESS not-accessible 800 STATUS deprecated 801 DESCRIPTION 802 "A mapping of an interface table entry to physical hardware." 803 INDEX { cpqHoIfPhysMapIndex } 804 ::= { cpqHoIfPhysMapTable 1 } 805 806 CpqHoIfPhysMapEntry ::= SEQUENCE { 807 cpqHoIfPhysMapIndex INTEGER, 808 cpqHoIfPhysMapSlot INTEGER, 809 cpqHoIfPhysMapIoBaseAddr INTEGER, 810 cpqHoIfPhysMapIrq INTEGER, 811 cpqHoIfPhysMapDma INTEGER, 812 cpqHoIfPhysMapMemBaseAddr INTEGER, 813 cpqHoIfPhysMapPort INTEGER, 814 cpqHoIfPhysMapDuplexState INTEGER, 815 cpqHoIfPhysMapCondition INTEGER 816 } 817 818 cpqHoIfPhysMapIndex OBJECT-TYPE 819 SYNTAX INTEGER (0..65535) 820 ACCESS read-only 821 STATUS deprecated 822 DESCRIPTION 823 "An index that uniquely specifies this entry. This value is 824 equal to the index of the entry in the MIB-II interface table 825 to which this entry corresponds." 826 ::= { cpqHoIfPhysMapEntry 1 } 827 828 cpqHoIfPhysMapSlot OBJECT-TYPE 829 SYNTAX INTEGER (0..255) 830 ACCESS read-only 831 STATUS deprecated 832 DESCRIPTION 833 "The number of the slot containing the physical hardware that 834 implements this interface. The number zero (0) indicates an 835 embedded interface (on the system board) or an interface whose 836 slot is unknown. Values may be unknown if the physical 837 hardware has not been configured using the EISA Configuration 838 Utility." 839 ::= { cpqHoIfPhysMapEntry 2 } 840 841 cpqHoIfPhysMapIoBaseAddr OBJECT-TYPE 842 SYNTAX INTEGER 843 ACCESS read-only 844 STATUS deprecated 845 DESCRIPTION 846 "The base I/O address of the physical hardware that implements 847 this interface." 848 ::= { cpqHoIfPhysMapEntry 3 } 849 850 cpqHoIfPhysMapIrq OBJECT-TYPE 851 SYNTAX INTEGER (0..255) 852 ACCESS read-only 853 STATUS deprecated 854 DESCRIPTION 855 "The number of the IRQ (interrupt) used for this physical 856 hardware interface. The number zero (0) indicates that this 857 device does not use an IRQ or this information is unavailable." 858 ::= { cpqHoIfPhysMapEntry 4 } 859 860 cpqHoIfPhysMapDma OBJECT-TYPE 861 SYNTAX INTEGER 862 ACCESS read-only 863 STATUS deprecated 864 DESCRIPTION 865 "The number of the DMA channel used for this physical hardware 866 interface. The number -1 indicates that this device does not 867 use a DMA channel or this information is unavailable." 868 ::= { cpqHoIfPhysMapEntry 5 } 869 870 cpqHoIfPhysMapMemBaseAddr OBJECT-TYPE 871 SYNTAX INTEGER 872 ACCESS read-only 873 STATUS deprecated 874 DESCRIPTION 875 "The base memory address used by this physical hardware 876 interface. The number zero (0) indicates that this device does 877 not use system memory or this information is unavailable." 878 ::= { cpqHoIfPhysMapEntry 6 } 879 880 cpqHoIfPhysMapPort OBJECT-TYPE 881 SYNTAX INTEGER 882 ACCESS read-only 883 STATUS deprecated 884 DESCRIPTION 885 "The port number of the interface for multi-port NICs. 886 A port number of -1 indicates that the port could not 887 be determined." 888 ::= { cpqHoIfPhysMapEntry 7 } 889 890 cpqHoIfPhysMapDuplexState OBJECT-TYPE 891 SYNTAX INTEGER { 892 other(1), -- default 893 half(2), 894 full(3) 895 } 896 ACCESS read-only 897 STATUS deprecated 898 DESCRIPTION 899 "This variable describes the configured duplex state of the NIC." 900 901 ::= { cpqHoIfPhysMapEntry 8 } 902 903 cpqHoIfPhysMapCondition OBJECT-TYPE 904 SYNTAX INTEGER 905 { 906 other(1), -- default 907 ok(2), 908 degraded(3), 909 failed(4) 910 } 911 ACCESS read-only 912 STATUS deprecated 913 DESCRIPTION 914 "The condition of this interface." 915 ::= { cpqHoIfPhysMapEntry 9 } 916 917 cpqHoIfPhysMapOverallCondition OBJECT-TYPE 918 SYNTAX INTEGER 919 { 920 other(1), -- default 921 ok(2), 922 degraded(3), 923 failed(4) 924 } 925 ACCESS read-only 926 STATUS deprecated 927 DESCRIPTION 928 "The overall condition of all interfaces." 929 ::= { cpqHoIfPhysMap 2 } 930 931-- **************************************************************************** 932-- Host OS Software Running Table 933-- ============================== 934-- 935-- The compaq enterprise (1.3.6.1.4.1.232) 936-- cpqHostOs Group (1.3.6.1.4.1.232.11) 937-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 938-- cpqHoSWRunning Group (1.3.6.1.4.1.232.11.2.6) 939-- cpqHoSWRunningTable (1.3.6.1.4.1.232.11.2.6.1) 940-- cpqHoSwRunningTrapDesc (1.3.6.1.4.1.232.11.2.6.2) 941-- 942-- 943-- The cpqHoSWRunning group contains configuration and status information 944-- about the software running on the host OS. 945-- 946-- Implementation of the cpqHoSWRunning group is optional for agents 947-- that support the Host OS MIB. 948-- 949-- **************************************************************************** 950 951 cpqHoSWRunningTable OBJECT-TYPE 952 SYNTAX SEQUENCE OF CpqHoSWRunningEntry 953 ACCESS not-accessible 954 STATUS mandatory 955 DESCRIPTION 956 "A table of descriptions of software running on the system." 957 ::= { cpqHoSWRunning 1 } 958 959 cpqHoSWRunningEntry OBJECT-TYPE 960 SYNTAX CpqHoSWRunningEntry 961 ACCESS not-accessible 962 STATUS mandatory 963 DESCRIPTION 964 "A description of a software program running on the system." 965 INDEX { cpqHoSWRunningIndex } 966 ::= { cpqHoSWRunningTable 1 } 967 968 CpqHoSWRunningEntry ::= SEQUENCE { 969 cpqHoSWRunningIndex INTEGER, 970 cpqHoSWRunningName DisplayString, 971 cpqHoSWRunningDesc DisplayString, 972 cpqHoSWRunningVersion DisplayString, 973 cpqHoSWRunningDate OCTET STRING, 974 cpqHoSWRunningMonitor INTEGER, 975 cpqHoSWRunningState INTEGER, 976 cpqHoSWRunningCount INTEGER, 977 cpqHoSWRunningCountMin INTEGER, 978 cpqHoSWRunningCountMax INTEGER, 979 cpqHoSWRunningEventTime OCTET STRING, 980 cpqHoSWRunningStatus INTEGER, 981 cpqHoSWRunningConfigStatus INTEGER, 982 cpqHoSWRunningIdentifier DisplayString, 983 cpqHoSWRunningRedundancyMode INTEGER 984 } 985 986 cpqHoSWRunningIndex OBJECT-TYPE 987 SYNTAX INTEGER (0..65535) 988 ACCESS read-only 989 STATUS mandatory 990 DESCRIPTION 991 "An index that uniquely specifies this entry." 992 ::= { cpqHoSWRunningEntry 1 } 993 994 cpqHoSWRunningName OBJECT-TYPE 995 SYNTAX DisplayString (SIZE (0..255)) 996 ACCESS read-only 997 STATUS mandatory 998 DESCRIPTION 999 "The name of the software." 1000 ::= { cpqHoSWRunningEntry 2 } 1001 1002 cpqHoSWRunningDesc OBJECT-TYPE 1003 SYNTAX DisplayString (SIZE (0..255)) 1004 ACCESS read-only 1005 STATUS mandatory 1006 DESCRIPTION 1007 "A description of the software." 1008 ::= { cpqHoSWRunningEntry 3 } 1009 1010 cpqHoSWRunningVersion OBJECT-TYPE 1011 SYNTAX DisplayString (SIZE (0..255)) 1012 ACCESS read-only 1013 STATUS mandatory 1014 DESCRIPTION 1015 "The version of the software. 1016 1017 This field will be a null (size 0) string if the agent cannot 1018 provide the software version." 1019 ::= { cpqHoSWRunningEntry 4 } 1020 1021 cpqHoSWRunningDate OBJECT-TYPE 1022 SYNTAX OCTET STRING (SIZE (7)) 1023 ACCESS read-only 1024 STATUS mandatory 1025 DESCRIPTION 1026 "The software date. 1027 1028 field octets contents range 1029 ===== ====== ======= ===== 1030 1 1-2 year 0..65536 1031 2 3 month 1..12 1032 3 4 day 1..31 1033 4 5 hour 0..23 1034 5 6 minute 0..59 1035 6 7 second 0..60 1036 (use 60 for leap-second) 1037 1038 1039 This field will be set to year = 0 if the agent cannot provide 1040 the software date. The hour, minute, and second field will be 1041 set to zero (0) if they are not relevant." 1042 ::= { cpqHoSWRunningEntry 5 } 1043 1044 cpqHoSWRunningMonitor OBJECT-TYPE 1045 SYNTAX INTEGER 1046 { 1047 other(1), -- default 1048 start(2), 1049 stop(3), 1050 startAndStop(4), 1051 count(5), 1052 startAndCount(6), 1053 countAndStop(7), 1054 startCountAndStop(8) 1055 } 1056 ACCESS read-only 1057 STATUS mandatory 1058 DESCRIPTION 1059 "The user specified monitor option for a process." 1060 ::= { cpqHoSWRunningEntry 6 } 1061 1062 cpqHoSWRunningState OBJECT-TYPE 1063 SYNTAX INTEGER 1064 { 1065 other(1), -- default 1066 started(2), 1067 stopped(3) 1068 } 1069 ACCESS read-only 1070 STATUS mandatory 1071 DESCRIPTION 1072 "The current state of monitored process." 1073 ::= { cpqHoSWRunningEntry 7 } 1074 1075 cpqHoSWRunningCount OBJECT-TYPE 1076 SYNTAX INTEGER (0..65535) 1077 ACCESS read-only 1078 STATUS optional 1079 DESCRIPTION 1080 "For each process name, the number of instances of the process running on the system is 1081 kept count of, in this variable." 1082 ::= { cpqHoSWRunningEntry 8 } 1083 1084 cpqHoSWRunningCountMin OBJECT-TYPE 1085 SYNTAX INTEGER (0..65535) 1086 ACCESS read-write 1087 STATUS optional 1088 DESCRIPTION 1089 "This is the lower threshold on cpqHoSWRunningCount to be set by the user." 1090 ::= { cpqHoSWRunningEntry 9 } 1091 1092 cpqHoSWRunningCountMax OBJECT-TYPE 1093 SYNTAX INTEGER (0..65535) 1094 ACCESS read-write 1095 STATUS optional 1096 DESCRIPTION 1097 "This is the upper threshold on cpqHoSWRunningCount to be set by the user." 1098 ::= { cpqHoSWRunningEntry 10 } 1099 1100 cpqHoSWRunningEventTime OBJECT-TYPE 1101 SYNTAX OCTET STRING (SIZE (7)) 1102 ACCESS read-only 1103 STATUS optional 1104 DESCRIPTION 1105 "The system time at which the monitored event, as per cpqHoSWRunningMonitor, last occurred. 1106 1107 field octets contents range 1108 ===== ====== ======== ===== 1109 1 1-2 year 0..65536 1110 2 3 month 1..12 1111 3 4 day 1..31 1112 4 5 hour 0..23 1113 5 6 minute 0..59 1114 6 7 second 0..60 1115 (use 60 for leap-second) 1116 1117 The hour, minute, and second field will be set to zero (0) if they are not relevant." 1118 ::= { cpqHoSWRunningEntry 11 } 1119 1120 cpqHoSWRunningStatus OBJECT-TYPE 1121 SYNTAX INTEGER 1122 { 1123 unknown(1), 1124 normal(2), 1125 warning(3), 1126 minor(4), 1127 major(5), 1128 critical(6), 1129 disabled(7) 1130 } 1131 ACCESS read-only 1132 STATUS optional 1133 DESCRIPTION 1134 "The overall alarm state of the resources managed by the software, or the software itself." 1135 ::= { cpqHoSWRunningEntry 12 } 1136 1137 cpqHoSWRunningConfigStatus OBJECT-TYPE 1138 SYNTAX INTEGER 1139 { 1140 unknown(1), 1141 starting(2), 1142 initialized(3), 1143 configured(4), 1144 operational(5) 1145 } 1146 ACCESS read-only 1147 STATUS optional 1148 DESCRIPTION 1149 "The configuration state of the software. The level of initialization the software has performed." 1150 ::= { cpqHoSWRunningEntry 13 } 1151 1152 cpqHoSWRunningIdentifier OBJECT-TYPE 1153 SYNTAX DisplayString (SIZE (0..255)) 1154 ACCESS read-only 1155 STATUS optional 1156 DESCRIPTION 1157 "The unique identifier of the sofware. This identifier should be unique for all instances of the sofware running in the environment." 1158 ::= { cpqHoSWRunningEntry 14 } 1159 1160 cpqHoSWRunningRedundancyMode OBJECT-TYPE 1161 SYNTAX INTEGER 1162 { 1163 unknown(1), 1164 master(2), 1165 backup(3), 1166 slave(4) 1167 } 1168 ACCESS read-only 1169 STATUS optional 1170 DESCRIPTION 1171 "When the software is running in a high availability mode, the failover mode of this instance of the software." 1172 ::= { cpqHoSWRunningEntry 15 } 1173 1174 cpqHoSwRunningTrapDesc OBJECT-TYPE 1175 SYNTAX DisplayString (SIZE (0..255)) 1176 ACCESS read-only 1177 STATUS mandatory 1178 DESCRIPTION 1179 "The error message for a process monitor event." 1180 ::= { cpqHoSWRunning 2 } 1181 1182 1183-- **************************************************************************** 1184-- Config Software Version Instrumentation Group 1185-- =============================================== 1186-- 1187-- The compaq enterprise (1.3.6.1.4.1.232) 1188-- cpqHostOs Group (1.3.6.1.4.1.232.11) 1189-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 1190-- cpqHoSwVer Group (1.3.6.1.4.1.232.11.2.7) 1191-- cpqHoSwVerTable (1.3.6.1.4.1.232.11.2.7.2) 1192-- cpqHoSwVerAgentsVer (1.3.6.1.4.1.232.11.2.7.3) 1193-- 1194-- The cpqSwVer group describes the software version table. 1195-- 1196-- Implementation of the cpqSwVer group is mandatory for all 1197-- agents that support the Host MIB. 1198-- 1199-- The read-write elements of this table should be saved from instance to 1200-- instance of the agent. 1201-- 1202-- This table can be added to by writing to the cpqHoSwVerName (using the 1203-- cpqHoSwVerNextIndex index) field with a new driver name. Writing to 1204-- this field causes the creation of a new table row (and any data that can 1205-- be obtained will be filled in, the remainder will be set to the defaults.) 1206-- 1207-- A row may be deleted by writing to the cpqHoSwVerName field with a null 1208-- entry. 1209-- **************************************************************************** 1210 1211 cpqHoSwVerNextIndex OBJECT-TYPE 1212 SYNTAX INTEGER 1213 ACCESS read-only 1214 STATUS mandatory 1215 DESCRIPTION 1216 "The index of the next available entry in the cpqHoSwVer 1217 table. If the maximum number of entries to the cpqHoSwVer 1218 table has been reached, this index will contain -1." 1219-- 1220-- Writing to the cpqHoSwVerName variable using this index will cause a new 1221-- entry in the table to be created. 1222-- 1223 ::= { cpqHoSwVer 1 } 1224 1225 cpqHoSwVerTable OBJECT-TYPE 1226 SYNTAX SEQUENCE OF CpqHoSwVerEntry 1227 ACCESS not-accessible 1228 STATUS mandatory 1229 DESCRIPTION 1230 "A list of software item entries." 1231 ::= { cpqHoSwVer 2 } 1232 1233 cpqHoSwVerEntry OBJECT-TYPE 1234 SYNTAX CpqHoSwVerEntry 1235 ACCESS not-accessible 1236 STATUS mandatory 1237 DESCRIPTION 1238 "A list of software items that are on the machine." 1239 INDEX { cpqHoSwVerIndex } 1240 ::= { cpqHoSwVerTable 1 } 1241 1242 CpqHoSwVerEntry ::= SEQUENCE { 1243 cpqHoSwVerIndex INTEGER, 1244 cpqHoSwVerStatus INTEGER, 1245 cpqHoSwVerType INTEGER, 1246 cpqHoSwVerName DisplayString, 1247 cpqHoSwVerDescription DisplayString, 1248 cpqHoSwVerDate OCTET STRING, 1249 cpqHoSwVerLocation DisplayString, 1250 cpqHoSwVerVersion DisplayString, 1251 cpqHoSwVerVersionBinary DisplayString 1252 } 1253 1254 cpqHoSwVerIndex OBJECT-TYPE 1255 SYNTAX INTEGER (0..65535) 1256 ACCESS read-only 1257 STATUS mandatory 1258 DESCRIPTION 1259 "An index that uniquely identifies an entry in the 1260 cpqHoSwVer table." 1261 ::= { cpqHoSwVerEntry 1 } 1262 1263 cpqHoSwVerStatus OBJECT-TYPE 1264 SYNTAX INTEGER { 1265 other(1), -- undefined (default) 1266 loaded(2), -- and running 1267 notloaded(3) -- found but not loaded 1268 } 1269 ACCESS read-only 1270 STATUS mandatory 1271 DESCRIPTION 1272 "Status for the software item." 1273-- 1274-- Items of type 'other' are those items which the agent could 1275-- not locate. 1276-- 1277 ::= { cpqHoSwVerEntry 2 } 1278 1279 cpqHoSwVerType OBJECT-TYPE 1280 SYNTAX INTEGER { 1281 other(1), 1282 driver(2), -- (default) 1283 agent(3), 1284 sysutil(4), 1285 application(5), 1286 keyfile(6) 1287 } 1288 ACCESS read-write 1289 STATUS mandatory 1290 DESCRIPTION 1291 "Type of software item." 1292 ::= { cpqHoSwVerEntry 3 } 1293 1294 cpqHoSwVerName OBJECT-TYPE 1295 SYNTAX DisplayString (SIZE (0..127)) 1296 ACCESS read-write 1297 STATUS mandatory 1298 DESCRIPTION 1299 "The name of this software item." 1300-- 1301-- Writing to this entry with an index equal to cpqHoSwVerNextIndex 1302-- causes a table row to be created, and all entries to be filled in. 1303-- 1304-- Writing to this entry with a NULL name deletes the current row. 1305-- 1306 ::= { cpqHoSwVerEntry 4 } 1307 1308 cpqHoSwVerDescription OBJECT-TYPE 1309 SYNTAX DisplayString (SIZE (0..127)) 1310 ACCESS read-write 1311 STATUS mandatory 1312 DESCRIPTION 1313 "The description of this software item." 1314-- 1315-- A length of 0 indicates that the description of this item is 1316-- not available. 1317-- 1318-- Writing to this entry can cause the entire row to be updated. 1319-- 1320 ::= { cpqHoSwVerEntry 5 } 1321 1322 cpqHoSwVerDate OBJECT-TYPE 1323 SYNTAX OCTET STRING (SIZE (7)) 1324 ACCESS read-only 1325 STATUS mandatory 1326 DESCRIPTION 1327 "The date of the software item, if any. 1328 1329 field octets contents range 1330 ===== ====== ======= ===== 1331 1 1-2 year 0..65535 1332 2 3 month 1..12 1333 3 4 day 1..31 1334 4 5 hour 0..23 1335 5 6 minute 0..59 1336 6 7 second 0..60 1337 (use 60 for leap-second) 1338 1339 The year field is set with the most significant octet first. 1340 1341 An entry of zero (0) means that there is no date associated with 1342 this software item. Zero is the default." 1343 ::= { cpqHoSwVerEntry 6 } 1344 1345 cpqHoSwVerLocation OBJECT-TYPE 1346 SYNTAX DisplayString (SIZE (0..255)) 1347 ACCESS read-write 1348 STATUS mandatory 1349 DESCRIPTION 1350 "The location of this software item on the server." 1351 ::= { cpqHoSwVerEntry 7 } 1352 1353 cpqHoSwVerVersion OBJECT-TYPE 1354 SYNTAX DisplayString (SIZE (0..50)) 1355 ACCESS read-only 1356 STATUS mandatory 1357 DESCRIPTION 1358 "An string that specifies the version of this item." 1359 ::= { cpqHoSwVerEntry 8 } 1360 1361 cpqHoSwVerVersionBinary OBJECT-TYPE 1362 SYNTAX DisplayString (SIZE (0..50)) 1363 ACCESS read-only 1364 STATUS mandatory 1365 DESCRIPTION 1366 "An string that specifies the version of this item based on 1367 the binary version resource." 1368 ::= { cpqHoSwVerEntry 9 } 1369 1370-- 1371-- New for release 7.10: cpqHoSwVerAgentsVer 1372-- 1373 cpqHoSwVerAgentsVer OBJECT-TYPE 1374 SYNTAX DisplayString (SIZE (0..50)) 1375 ACCESS read-only 1376 STATUS mandatory 1377 DESCRIPTION 1378 "A string that specifies the version of the Insight 1379 Management Agents running on the system." 1380 ::= { cpqHoSwVer 3 } 1381 1382 1383-- **************************************************************************** 1384-- The cpqHoGeneric group holds only the generic trap 1385-- 1386-- The compaq enterprise (1.3.6.1.4.1.232) 1387-- cpqHostOS Group (1.3.6.1.4.1.232.11) 1388-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 1389-- cpqHoGeneric Group (1.3.6.1.4.1.232.11.2.8) 1390-- 1391-- Implementation of this group is optional. 1392-- 1393-- **************************************************************************** 1394 cpqHoGenericData OBJECT-TYPE 1395 SYNTAX DisplayString (SIZE (0..254)) 1396 ACCESS read-write 1397 STATUS mandatory 1398 DESCRIPTION 1399 "Data for the generic trap." 1400-- 1401-- This is the data variable that is sent with the generic trap below. 1402-- 1403-- Writing to this variable will cause the generic trap to be sent with 1404-- the newly written data. 1405-- 1406 ::= { cpqHoGeneric 1 } 1407 1408 cpqHoCriticalSoftwareUpdateData OBJECT-TYPE 1409 SYNTAX DisplayString (SIZE (0..512)) 1410 ACCESS read-write 1411 STATUS mandatory 1412 DESCRIPTION 1413 "Data for the Critical Software Update trap." 1414-- 1415-- This is the data variable that is sent with the Critical Software 1416-- update Notification Trap below. 1417-- Writing to this variable will cause the Critical Software update Notification Trap 1418-- to be sent with the newly written data. 1419-- 1420 ::= { cpqHoGeneric 2 } 1421 1422-- **************************************************************************** 1423-- Software Performance Group 1424-- =========================== 1425-- 1426-- The compaq enterprise (1.3.6.1.4.1.232) 1427-- cpqHostOS Group (1.3.6.1.4.1.232.11) 1428-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 1429-- cpqHoSwPerf Group (1.3.6.1.4.1.232.11.2.9) 1430-- 1431-- Implementation of this group is optional. 1432-- 1433-- **************************************************************************** 1434 cpqHoSwPerfAppErrorDesc OBJECT-TYPE 1435 SYNTAX DisplayString (SIZE (0..254)) 1436 ACCESS read-only 1437 STATUS mandatory 1438 DESCRIPTION 1439 " This string holds error information about the last application 1440 error that occurred in the system. " 1441 1442 ::= { cpqHoSwPerf 1 } 1443 1444-- **************************************************************************** 1445-- System Status Group 1446-- =================== 1447-- 1448-- The compaq enterprise (1.3.6.1.4.1.232) 1449-- cpqHostOS Group (1.3.6.1.4.1.232.11) 1450-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 1451-- cpqHoSystemStatus Group (1.3.6.1.4.1.232.11.2.10) 1452-- 1453-- Implementation of this group is mandatory. 1454-- 1455-- **************************************************************************** 1456 1457 cpqHoMibStatusArray OBJECT-TYPE 1458 SYNTAX OCTET STRING (SIZE (4..256)) 1459 ACCESS read-only 1460 STATUS mandatory 1461 DESCRIPTION 1462 "The MIB Status Array is an array of MIB status structures. Each 1463 structure is made up of 4 octets. The first octet is the MIB 1464 presence. The second octet is MIB condition. The third octet is 1465 MIB major revision. The fourth octet is MIB minor revision. These 1466 blocks of 4 octets each are index by the mib identifier just after 1467 the compaq enterprise (eg in 1.3.6.1.232.11 mib, the index is 11). 1468 The 4 octets in the first block (block 0) are reserved for systems 1469 management and serve as an aggregate of the other mibs. 1470 1471 Array element 0 is the status for all MIBs in the Compaq 1472 Enterprise. Array element n, where n > 0, is the status for the 1473 nth MIB in the Compaq Enterprise (.1.3.6.1.4.1.232.n). 1474 1475 Octet Element Field 1476 ======== ======= ========= 1477 0 0 Status of any Compaq MIBs 1478 1 Condition of all Compaq MIBs 1479 2 System Flags (see below) 1480 3 Detailed type (see below) 1481 4 1 Status of Compaq MIB 1 1482 5 Condition of Compaq MIB 1 1483 6 Major Revision of Compaq MIB 1 1484 7 Minor Revision of Compaq MIB 1 1485 8 2 Status of Compaq MIB 2 1486 9 Condition of Compaq MIB 2 1487 10 Major Revision of Compaq MIB 2 1488 11 Minor Revision of Compaq MIB 2 1489 . . 1490 . 1491 . 1492 n*4 n Status of Compaq MIB n 1493 (n*4)+1 Condition of Compaq MIB n 1494 (n*4)+2 Major Revision of Compaq MIB n 1495 (n*4)+3 Minor Revision of Compaq MIB n 1496 1497 System Flags (octet 2) 1498 Bit Meaning 1499 ===== ========= 1500 0 Equals 1 if the device is not a server, see detailed type below 1501 Equals 0 if the device is a server 1502 1 This system contains enabled remote console 1503 functionality. 1504 2 This system is configured to be an Integration Server. 1505 3 Web Based Management is enabled. 1506 4-7 Reserved (reserved Bits should be zero) 1507 1508 Detailed Type (octet 3) 1509 Bits 0-4 Detailed Type, only used if bit 0 in octet 2 is 1. 1510 Bits 5-7 Reserved for expansion. note, use these last in case we 1511 need more then 32 types someday. 1512 1513 Type Values for Bits 0-4 (maps to CIM7 types) 1514 Unknown = 0 1515 Server = 1 (yes a duplicate of the server flag) 1516 Desktop = 2 1517 Workstation = 3 1518 Portable = 4 1519 Router = 5 1520 Cluster = 6 1521 Printer = 7 1522 Switch = 8 (network switch) 1523 Repeater = 9 1524 Remote Access Device = 10 1525 Other = 11 1526 Management Processor = 12 (rib, RILOE, iLo) 1527 Rack = 13 1528 Enclosure = 14 1529 KVM Switch = 15 (IP enabled keyboard video mouse switch). 1530 UPS = 16 1531 Power Distribution Unit = 17 1532 Environmental Monitor = 18 (eg CMC) 1533 Power Distribution Rack = 19 (PDR) 1534 Storage Device = 20 1535 1536 For all other blocks, they are defined as: 1537 Status This is a collection of flags. Each bit has the 1538 following meaning when it is on (1): 1539 1540 Bit 2-7: RESERVED: Always 0 1541 Bit 1: MIB is from offline data (only applies 1542 to global system status) 1543 Bit 0: MIB is available 1544 1545 NOTE: bit 7 is the most significant bit, bit 0 1546 is the least significant. 1547 1548 Condition 0 - Not available 1549 1 - Other 1550 2 - OK 1551 3 - Degraded 1552 4 - Failed 1553 1554 Major Revision 0..255, where 0 is not available 1555 Minor Revision 0..255, where 0 is not available" 1556 1557 1558 1559 ::= { cpqHoSystemStatus 1 } 1560 1561 cpqHoConfigChangedDate OBJECT-TYPE 1562 SYNTAX OCTET STRING (SIZE (7)) 1563 ACCESS read-only 1564 STATUS mandatory 1565 DESCRIPTION 1566 "The date/time when the agents were last loaded. 1567 1568 field octets contents range 1569 ===== ====== ======= ===== 1570 1 1-2 year 0..65536 1571 2 3 month 1..12 1572 3 4 day 1..31 1573 4 5 hour 0..23 1574 5 6 minute 0..59 1575 6 7 second 0..60 1576 (use 60 for leap-second) 1577 1578 1579 This field will be set to year = 0 if the agent cannot provide 1580 the date/time. The year field is set with the most significant 1581 octet first." 1582 ::= { cpqHoSystemStatus 2 } 1583 1584 cpqHoGUID OBJECT-TYPE 1585 SYNTAX OCTET STRING (SIZE (16..17)) 1586 ACCESS read-write 1587 STATUS mandatory 1588 DESCRIPTION 1589 "The globally unique identifier of this physical server. 1590 If the OS cannot determine a unique ID, it will default the 1591 variable to contain all 0's. The management station can then 1592 perform a SET to this variable to provide the unique ID. 1593 When the system is cellular, it will have its partition number 1594 appended at the end." 1595 ::= { cpqHoSystemStatus 3 } 1596 1597 cpqHoCodeServer OBJECT-TYPE 1598 SYNTAX INTEGER 1599 ACCESS read-only 1600 STATUS mandatory 1601 DESCRIPTION 1602 "This item indicates how many code server shares are currently 1603 configured on the system. If the value of this attribute is 1604 0, this server has not been configured with code server shares." 1605 ::= { cpqHoSystemStatus 4 } 1606 1607 cpqHoWebMgmtPort OBJECT-TYPE 1608 SYNTAX INTEGER 1609 ACCESS read-only 1610 STATUS mandatory 1611 DESCRIPTION 1612 "This item indicates the port used by the Insight Web Agent. 1613 If the port cannot be determined or the Web Management agent 1614 is not enabled, this value will be -1." 1615 ::= { cpqHoSystemStatus 5 } 1616 1617 cpqHoGUIDCanonical OBJECT-TYPE 1618 SYNTAX OCTET STRING (SIZE (32..36)) 1619 ACCESS read-write 1620 STATUS mandatory 1621 DESCRIPTION 1622 "The globally unique identifier in canonical format of this 1623 physical server. If the OS cannot determine a unique ID, it will 1624 default the variable to blank." 1625 ::= { cpqHoSystemStatus 6 } 1626 1627 cpqHoMibHealthStatusArray OBJECT-TYPE 1628 SYNTAX OCTET STRING (SIZE (1..256)) 1629 ACCESS read-only 1630 STATUS mandatory 1631 DESCRIPTION 1632 "The MIB Health Status Array is an array of status values representing an 1633 overall status in element 0 follwed by server and storage status values as follows: 1634 1635 Octet Element Field 1636 ======== ======= ========= 1637 0 0 Aggregated Status of array elements 1638 1 1 Status of element 1 1639 2 2 Status of element 2 1640 . 1641 . 1642 . 1643 n n Status of element n 1644 1645 1646 Status 0 - Not available 1647 1 - Other 1648 2 - OK 1649 3 - Degraded 1650 4 - Failed 1651 . 1652 . 1653 Mibs are assigned an array element as follows. New items are added at the end. 1654 0 - System Health Status (overall status as reported by who is reporting (agents or iLO)) 1655 1 - Total Aggregate (Includes IML Status) 1656 2 - Processors (TBD 232.1.2.2.4:cpqSeCpuCondition) 1657 3 - Memory (232.6.2.14.4:cpqHeResilientMemCondition) 1658 4 - Cooling (232.6.2.6.4:cpqHeThermalSystemFanStatus) 1659 5 - Sensors (232.6.2.6.3:cpqHeThermalTempStatus) 1660 6 - Power (232.6.2.9.1:cpqHeFltTolPwrSupplyCondition) 1661 7 - ProLiant Logs (232.6.2.11.2:cpqHeEventLogCondition) 1662 8 - ASR (232.6.2.5.17:cpqHeAsrCondition) 1663 9 - Drive Array (232.3.1.3:cpqDaMibCondition) 1664 10 - SCSI (232.5.1.3:cpqScsiMibCondition) 1665 11 - Storage Enclosures (232.8.1.3:cpqSsMibCondition) 1666 12 - IDE (232.14.1.3:cpqIdeMibCondition) 1667 13 - FC (232.16.1.3:cpqFcaMibCondition) 1668 14 - Networks (232.18.1.3:cpqNicMibCondition) 1669 15 - MP (232.9.1.3:cpqSm2MibCondition) 1670 16 - HW/BIOS (232.6.2.16.1:cpqHeHWBiosCondition) 1671 17 - Battery (232.6.2.17.1:cpqHeSysBackupBatteryCondition)" 1672 1673 ::= { cpqHoSystemStatus 7 } 1674 1675-- **************************************************************************** 1676-- Trap Info Group 1677-- ================ 1678-- 1679-- The compaq enterprise (1.3.6.1.4.1.232) 1680-- cpqHostOS Group (1.3.6.1.4.1.232.11) 1681-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 1682-- cpqHoTrapInfo Group (1.3.6.1.4.1.232.11.2.11) 1683-- 1684-- Implementation of this group is mandatory. 1685-- 1686-- **************************************************************************** 1687 1688 cpqHoTrapFlags OBJECT-TYPE 1689 SYNTAX INTEGER 1690 ACCESS read-only 1691 STATUS mandatory 1692 DESCRIPTION 1693 "The Trap Flags. 1694 1695 1696 This is a collection of flags used during trap delivery. 1697 Each bit has the following meaning: 1698 1699 Bit 5-31: RESERVED: Always 0. 1700 Bit 2-4: Trap Condition 1701 0 = Not used (for backward compatibility) 1702 1 = Condition unknown or N/A 1703 2 = Condition ok 1704 3 = Condition degraded 1705 4 = Condition failed 1706 5-7 = reserved 1707 Bit 1: Client IP address type 1708 0 = static entry 1709 1 = DHCP entry 1710 Bit 0: Agent Type 1711 0 = Server 1712 1 = Client 1713 1714 NOTE: bit 31 is the most significant bit, bit 0 is the least 1715 significant." 1716 1717 ::= { cpqHoTrapInfo 1 } 1718 1719 1720-- **************************************************************************** 1721-- OS Client Table 1722-- ==================== 1723-- 1724-- The compaq enterprise (1.3.6.1.4.1.232) 1725-- cpqHostOS Group (1.3.6.1.4.1.232.11) 1726-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 1727--- cpqHoClient Group (1.3.6.1.4.1.232.11.2.12) 1728-- 1729-- The cpqHoClient table contains entries describing identification, 1730-- address, and status information about each unit that is using 1731-- services provided by this unit. 1732-- 1733-- **************************************************************************** 1734 1735 1736 1737 cpqHoClientLastModified OBJECT-TYPE 1738 SYNTAX OCTET STRING (SIZE (7)) 1739 ACCESS read-only 1740 STATUS mandatory 1741 DESCRIPTION 1742 "The date/time of the last modification to the client table. 1743 1744 field octets contents range 1745 ===== ====== ======= ===== 1746 1 1-2 year 0..65536 1747 2 3 month 1..12 1748 3 4 day 1..31 1749 4 5 hour 0..23 1750 5 6 minute 0..59 1751 6 7 second 0..60 1752 (use 60 for leap-second) 1753 1754 1755 This field will be set to all 0's if there are no entries to the 1756 client table. 1757 1758 The year field will be set to 0xFFFF if the agent does not support 1759 the client table. 1760 1761 The year field is set with the most significant octet first." 1762 ::= { cpqHoClients 1 } 1763 1764 cpqHoClientDelete OBJECT-TYPE 1765 SYNTAX DisplayString (SIZE (0..15)) 1766 ACCESS read-write 1767 STATUS mandatory 1768 DESCRIPTION 1769 "Setting this variable to the name of a client in the client table 1770 will cause that row in the table to be deleted. Any other set 1771 will fail. 1772 1773 Note that the indices of the table will (most likely) be renumbered 1774 following a deletion." 1775 ::= { cpqHoClients 2 } 1776 1777 1778 cpqHoClientTable OBJECT-TYPE 1779 SYNTAX SEQUENCE OF CpqHoClientEntry 1780 ACCESS not-accessible 1781 STATUS mandatory 1782 DESCRIPTION 1783 "A table of client descriptions." 1784 ::= { cpqHoClients 3 } 1785 1786 cpqHoClientEntry OBJECT-TYPE 1787 SYNTAX CpqHoClientEntry 1788 ACCESS not-accessible 1789 STATUS mandatory 1790 DESCRIPTION 1791 "A client description." 1792 INDEX { cpqHoClientIndex } 1793 ::= { cpqHoClientTable 1 } 1794 1795 CpqHoClientEntry ::= SEQUENCE { 1796 cpqHoClientIndex INTEGER, 1797 cpqHoClientName DisplayString, 1798 cpqHoClientIpxAddress OCTET STRING, 1799 cpqHoClientIpAddress IpAddress, 1800 cpqHoClientCommunity DisplayString, 1801 cpqHoClientID OCTET STRING 1802 } 1803 1804 cpqHoClientIndex OBJECT-TYPE 1805 SYNTAX INTEGER (0..65535) 1806 ACCESS read-only 1807 STATUS mandatory 1808 DESCRIPTION 1809 "An index that uniquely specifies this entry." 1810 ::= { cpqHoClientEntry 1 } 1811 1812 cpqHoClientName OBJECT-TYPE 1813 SYNTAX DisplayString (SIZE (0..15)) 1814 ACCESS read-only 1815 STATUS mandatory 1816 DESCRIPTION 1817 "The Win95 machine name of this client." 1818 1819-- Note that Win95 limits the machine name to a maximum of 15 characters. 1820 1821 ::= { cpqHoClientEntry 2 } 1822 1823 cpqHoClientIpxAddress OBJECT-TYPE 1824 SYNTAX OCTET STRING (SIZE (20)) 1825 ACCESS read-only 1826 STATUS mandatory 1827 DESCRIPTION 1828 "The IPX address for this client, all octets should be set to 1829 0xff if this machine does not support IPX. 1830 1831 The format is NetAddr:NodeNumber and sent in MSB order: 1832 1833 1111111111 1834 01234567:890123456789" 1835 1836-- Note, this item is still in definition and probably will change. 1837 1838 ::= { cpqHoClientEntry 3 } 1839 1840 cpqHoClientIpAddress OBJECT-TYPE 1841 SYNTAX IpAddress 1842 ACCESS read-only 1843 STATUS mandatory 1844 DESCRIPTION 1845 "The IP address for this client, all octets should be set to 1846 0xff if this machine does not support IP. The order will be 1847 in network byte order (ie MSB first.)" 1848 1849 ::= { cpqHoClientEntry 4 } 1850 1851 cpqHoClientCommunity OBJECT-TYPE 1852 SYNTAX DisplayString (SIZE (0..48)) 1853 ACCESS read-only 1854 STATUS mandatory 1855 DESCRIPTION 1856 "A community name that can be used to query the client with SNMP. 1857 This community name should have, but is not required to have, 1858 the greatest possible access to client information." 1859 ::= { cpqHoClientEntry 5 } 1860 1861 cpqHoClientID OBJECT-TYPE 1862 SYNTAX OCTET STRING (SIZE (16)) 1863 ACCESS read-only 1864 STATUS mandatory 1865 DESCRIPTION 1866 "The unique identifier of this client." 1867 ::= { cpqHoClientEntry 6 } 1868 1869-- **************************************************************************** 1870-- OS Memory Group 1871-- =============== 1872-- 1873-- The compaq enterprise (1.3.6.1.4.1.232) 1874-- cpqHostOS Group (1.3.6.1.4.1.232.11) 1875-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 1876--- cpqHoMemory Group (1.3.6.1.4.1.232.11.2.13) 1877-- 1878-- The cpqHoMemory group contains entries describing memory 1879-- as seen by the OS. 1880-- 1881-- **************************************************************************** 1882 1883 cpqHoPhysicalMemorySize OBJECT-TYPE 1884 SYNTAX INTEGER 1885 ACCESS read-only 1886 STATUS mandatory 1887 DESCRIPTION 1888 "Total amount of physical memory as seen by the OS (in megabytes). 1889 1890 A -1 will be returned if this value could not be determined." 1891 ::= { cpqHoMemory 1 } 1892 1893 cpqHoPhysicalMemoryFree OBJECT-TYPE 1894 SYNTAX INTEGER 1895 ACCESS read-only 1896 STATUS mandatory 1897 DESCRIPTION 1898 "The amount of free physical memory (in megabytes). 1899 1900 A -1 will be returned if this value could not be determined." 1901 ::= { cpqHoMemory 2 } 1902 1903 cpqHoPagingMemorySize OBJECT-TYPE 1904 SYNTAX INTEGER 1905 ACCESS read-only 1906 STATUS mandatory 1907 DESCRIPTION 1908 "Total virtual memory available from the OS (in megabytes). 1909 1910 A -1 will be returned if this value could not be determined." 1911 ::= { cpqHoMemory 3 } 1912 1913 cpqHoPagingMemoryFree OBJECT-TYPE 1914 SYNTAX INTEGER 1915 ACCESS read-only 1916 STATUS mandatory 1917 DESCRIPTION 1918 "Available paging memory (in megabytes). 1919 1920 A -1 will be returned if this value could not be determined." 1921 ::= { cpqHoMemory 4 } 1922 1923 cpqHoBootPagingFileSize OBJECT-TYPE 1924 SYNTAX DisplayString (SIZE (0..10)) 1925 ACCESS read-only 1926 STATUS mandatory 1927 DESCRIPTION 1928 "The paging file size of the boot volume in the format xxxMB or 1929 xxxGB, where xxx is the paging file size in that unit shown right 1930 after it. 1931 1932 NULL value will be returned if this value could not be determined." 1933 ::= { cpqHoMemory 5 } 1934 1935 cpqHoBootPagingFileMinimumSize OBJECT-TYPE 1936 SYNTAX DisplayString (SIZE (0..10)) 1937 ACCESS read-only 1938 STATUS mandatory 1939 DESCRIPTION 1940 "Minimum paging file size of the boot volume required to save the 1941 memory dump in the event of a system crash. The format is xxxMB or 1942 xxxGB, where xxx is the minimum paging file size in that unit shown 1943 right after it." 1944 ::= { cpqHoMemory 6 } 1945 1946 cpqHoBootPagingFileVolumeFreeSpace OBJECT-TYPE 1947 SYNTAX DisplayString (SIZE (0..10)) 1948 ACCESS read-only 1949 STATUS optional 1950 DESCRIPTION 1951 "Free space of the boot volume required to save the memory dump in the 1952 event of a system crash. The format is xxxMB or xxxGB, where xxx is 1953 the minimum paging file size in that unit shown right after it." 1954 ::= { cpqHoMemory 7 } 1955 1956-- **************************************************************************** 1957-- Firmware Version Instrumentation Group 1958-- ====================================== 1959-- 1960-- The compaq enterprise (1.3.6.1.4.1.232) 1961-- cpqHostOs Group (1.3.6.1.4.1.232.11) 1962-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 1963-- cpqHoFwVer Group (1.3.6.1.4.1.232.11.2.14) 1964-- cpqHoFwVerTable (1.3.6.1.4.1.232.11.2.14.1) 1965-- 1966-- The cpqHoFwVer group describes the firmware version table. 1967-- 1968-- Implementation of the cpqHoFwVer group is mandatory for all 1969-- agents that support the Host MIB. 1970-- 1971-- **************************************************************************** 1972 1973 cpqHoFwVerTable OBJECT-TYPE 1974 SYNTAX SEQUENCE OF CpqHoFwVerEntry 1975 ACCESS not-accessible 1976 STATUS mandatory 1977 DESCRIPTION 1978 "A list of firmware item entries." 1979 ::= { cpqHoFwVer 1 } 1980 1981 cpqHoFwVerEntry OBJECT-TYPE 1982 SYNTAX CpqHoFwVerEntry 1983 ACCESS not-accessible 1984 STATUS mandatory 1985 DESCRIPTION 1986 "A list of firmware items that are on the machine." 1987 INDEX { cpqHoFwVerIndex } 1988 ::= { cpqHoFwVerTable 1 } 1989 1990 CpqHoFwVerEntry ::= SEQUENCE { 1991 cpqHoFwVerIndex INTEGER, 1992 cpqHoFwVerCategory INTEGER, 1993 cpqHoFwVerDeviceType INTEGER, 1994 cpqHoFwVerDisplayName DisplayString, 1995 cpqHoFwVerVersion DisplayString, 1996 cpqHoFwVerLocation DisplayString, 1997 cpqHoFwVerXmlString DisplayString, 1998 cpqHoFwVerKeyString DisplayString, 1999 cpqHoFwVerUpdateMethod INTEGER 2000 } 2001 2002 cpqHoFwVerIndex OBJECT-TYPE 2003 SYNTAX INTEGER 2004 ACCESS read-only 2005 STATUS mandatory 2006 DESCRIPTION 2007 "Firmware Version Index. 2008 2009 The firmware version index uniquely identifies an entry in the 2010 cpqHoFwVer table." 2011 ::= { cpqHoFwVerEntry 1 } 2012 2013 cpqHoFwVerCategory OBJECT-TYPE 2014 SYNTAX INTEGER { 2015 other(1), 2016 storage(2), 2017 nic(3), 2018 rib(4), 2019 system(5) 2020 } 2021 ACCESS read-only 2022 STATUS mandatory 2023 DESCRIPTION 2024 "Firmware Version Category." 2025 ::= { cpqHoFwVerEntry 2 } 2026 2027 cpqHoFwVerDeviceType OBJECT-TYPE 2028 SYNTAX INTEGER { 2029 other(1), 2030 internalArrayController(2), 2031 fibreArrayController(3), 2032 scsiController(4), 2033 fibreChannelTapeController(5), 2034 modularDataRouter(6), 2035 ideCdRomDrive(7), 2036 ideDiskDrive(8), 2037 scsiCdRom-ScsiAttached(9), 2038 scsiDiskDrive-ScsiAttached(10), 2039 scsiTapeDrive-ScsiAttached(11), 2040 scsiTapeLibrary-ScsiAttached(12), 2041 scsiDiskDrive-ArrayAttached(13), 2042 scsiTapeDrive-ArrayAttached(14), 2043 scsiTapeLibrary-ArrayAttached(15), 2044 scsiDiskDrive-FibreAttached(16), 2045 scsiTapeDrive-FibreAttached(17), 2046 scsiTapeLibrary-FibreAttached(18), 2047 scsiEnclosureBackplaneRom-ScsiAttached(19), 2048 scsiEnclosureBackplaneRom-ArrayAttached(20), 2049 scsiEnclosureBackplaneRom-FibreAttached(21), 2050 scsiEnclosureBackplaneRom-ra4x00(22), 2051 systemRom(23), 2052 networkInterfaceController(24), 2053 remoteInsightBoard(25), 2054 sasDiskDrive-SasAttached(26), 2055 sataDiskDrive-SataAttached(27), 2056 usbController(28), 2057 sasControllerAdapter(29), 2058 sataControllerAdapter(30), 2059 systemDevice(31), 2060 fibreChannelHba(32), 2061 convergedNetworkAdapter(33), 2062 ideController(34) 2063 } 2064 ACCESS read-only 2065 STATUS mandatory 2066 DESCRIPTION 2067 "Firmware Version Device Type." 2068 ::= { cpqHoFwVerEntry 3 } 2069 2070 cpqHoFwVerDisplayName OBJECT-TYPE 2071 SYNTAX DisplayString (SIZE (0..127)) 2072 ACCESS read-only 2073 STATUS mandatory 2074 DESCRIPTION 2075 "Firmware Version Device Display Name. 2076 2077 This is the display name of the device containing the firmware." 2078 ::= { cpqHoFwVerEntry 4 } 2079 2080 cpqHoFwVerVersion OBJECT-TYPE 2081 SYNTAX DisplayString (SIZE (0..31)) 2082 ACCESS read-only 2083 STATUS mandatory 2084 DESCRIPTION 2085 "Firmware Version. 2086 2087 This is the version of the device firmware." 2088 ::= { cpqHoFwVerEntry 5 } 2089 2090 cpqHoFwVerLocation OBJECT-TYPE 2091 SYNTAX DisplayString (SIZE (0..255)) 2092 ACCESS read-only 2093 STATUS mandatory 2094 DESCRIPTION 2095 "Firmware Version Device Location. 2096 2097 This is a printable string that specifies the location of the 2098 device that contains the firmware." 2099 ::= { cpqHoFwVerEntry 6 } 2100 2101 cpqHoFwVerXmlString OBJECT-TYPE 2102 SYNTAX DisplayString (SIZE (0..255)) 2103 ACCESS read-only 2104 STATUS mandatory 2105 DESCRIPTION 2106 "Firmware Version Xml String. 2107 2108 This is an XML string that specifies the location of the device 2109 that contains the firmware. 2110 This will be NULL string (size 0) if this information could not 2111 be provided." 2112 ::= { cpqHoFwVerEntry 7 } 2113 2114 cpqHoFwVerKeyString OBJECT-TYPE 2115 SYNTAX DisplayString (SIZE (0..127)) 2116 ACCESS read-only 2117 STATUS mandatory 2118 DESCRIPTION 2119 "Firmware Version Key String. 2120 2121 This field is differentiate devices of the same type." 2122 ::= { cpqHoFwVerEntry 8 } 2123 2124 2125 cpqHoFwVerUpdateMethod OBJECT-TYPE 2126 SYNTAX INTEGER { 2127 other(1), 2128 noUpdate(2), 2129 softwareflash(3), 2130 replacePhysicalRom(4) 2131 } 2132 ACCESS read-only 2133 STATUS mandatory 2134 DESCRIPTION 2135 "Firmware Version update method." 2136 ::= { cpqHoFwVerEntry 9 } 2137 2138 2139-- **************************************************************************** 2140-- Hardware Information Group 2141-- ====================================== 2142-- 2143-- The compaq enterprise (1.3.6.1.4.1.232) 2144-- cpqHostOs Group (1.3.6.1.4.1.232.11) 2145-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 2146-- cpqHoHWInfo Group (1.3.6.1.4.1.232.11.2.15) 2147-- cpqHoHWInfoPlatform (1.3.6.1.4.1.232.11.2.15.1) 2148-- 2149-- The cpqHoHWInfo group describes some hw information necessary to other agents. 2150-- 2151-- Implementation of the cpqHoHWInfo group is optional for 2152-- agents that support the Host MIB. 2153-- 2154-- **************************************************************************** 2155 cpqHoHWInfoPlatform OBJECT-TYPE 2156 SYNTAX INTEGER { 2157 unknown(1), 2158 cellular(2), 2159 foundation(3), 2160 virtualMachine(4), 2161 serverBlade(5) 2162 } 2163 ACCESS read-only 2164 STATUS optional 2165 DESCRIPTION 2166 "Hardware platform type. 2167 2168 This object represents the platform type of the server's host 2169 system represented by this MIB." 2170 ::= { cpqHoHWInfo 1 } 2171 2172-- **************************************************************************** 2173-- The cpqPwrThreshold group holds data for the 2174-- 2175-- The compaq enterprise (1.3.6.1.4.1.232) 2176-- cpqHostOS Group (1.3.6.1.4.1.232.11) 2177-- cpqHoComponent Group (1.3.6.1.4.1.232.11.2) 2178-- cpqPwrThreshold Group (1.3.6.1.4.1.232.11.2.16) 2179-- 2180-- Implementation of this group is mandatory. 2181-- 2182-- **************************************************************************** 2183 cpqPwrWarnType OBJECT-TYPE 2184 SYNTAX DisplayString (SIZE (0..254)) 2185 ACCESS read-write 2186 STATUS mandatory 2187 DESCRIPTION 2188 "Type of power reading on which the warning is based." 2189 2190 ::= { cpqPwrThreshold 1 } 2191 2192 cpqPwrWarnThreshold OBJECT-TYPE 2193 SYNTAX INTEGER 2194 ACCESS read-write 2195 STATUS mandatory 2196 DESCRIPTION 2197 "The threshold the power usage must exceed (in Watts)." 2198 2199 ::= { cpqPwrThreshold 2 } 2200 2201 cpqPwrWarnDuration OBJECT-TYPE 2202 SYNTAX INTEGER 2203 ACCESS read-write 2204 STATUS mandatory 2205 DESCRIPTION 2206 "Duration that power usage must be exceeded before warning (in minutes)." 2207 2208 ::= { cpqPwrThreshold 3 } 2209 2210 cpqSerialNum OBJECT-TYPE 2211 SYNTAX DisplayString (SIZE (0..254)) 2212 ACCESS read-write 2213 STATUS mandatory 2214 DESCRIPTION 2215 "Serial number of the server." 2216 2217 ::= { cpqPwrThreshold 4 } 2218 2219 cpqServerUUID OBJECT-TYPE 2220 SYNTAX DisplayString (SIZE (0..254)) 2221 ACCESS read-write 2222 STATUS mandatory 2223 DESCRIPTION 2224 "Server UUID" 2225 2226 ::= { cpqPwrThreshold 5 } 2227 2228 2229-- **************************************************************************** 2230-- Host MIB Trap Definitions 2231-- ========================= 2232-- 2233-- The SNMP trap messages must not be bigger than 484 octets (bytes). 2234-- 2235-- Trap support in an SNMP agent implementation is optional. An SNMP 2236-- agent implementation may support all, some, or none of the traps. 2237-- If traps are supported, The user should be provided with the option of 2238-- disabling traps. 2239-- 2240-- Implementation of cpqHoGenericTrap is a mandatory part of the Generic 2241-- group. 2242-- 2243-- ************************************************************************** 2244 2245 cpqHoGenericTrap TRAP-TYPE 2246 ENTERPRISE compaq 2247 VARIABLES { cpqHoGenericData } 2248 DESCRIPTION 2249 -- This trap is a generic trap, and left undefined. 2250 "Generic trap." 2251 2252 --#TYPE "Generic trap (11001)" 2253 --#SUMMARY "%s" 2254 --#ARGUMENTS {0} 2255 --#SEVERITY MAJOR 2256 --#TIMEINDEX 99 2257 2258 ::= 11001 2259 2260 cpqHoAppErrorTrap TRAP-TYPE 2261 ENTERPRISE compaq 2262 VARIABLES { cpqHoSwPerfAppErrorDesc } 2263 DESCRIPTION 2264 "An application has generated an exception. Specific 2265 error information is contained in the variable 2266 cpqHoSwPerfAppErrorDesc." 2267 2268 --#TYPE "Application Error Trap (11002)" 2269 --#SUMMARY "%s" 2270 --#ARGUMENTS {0} 2271 --#SEVERITY MAJOR 2272 --#TIMEINDEX 99 2273 2274 ::= 11002 2275 2276 2277 cpqHo2GenericTrap TRAP-TYPE 2278 ENTERPRISE compaq 2279 VARIABLES { sysName, cpqHoTrapFlags, cpqHoGenericData } 2280 DESCRIPTION 2281 -- This trap is a generic trap, and left undefined. 2282 "Generic trap." 2283 2284 --#TYPE "Generic trap (11003)" 2285 --#SUMMARY "%s" 2286 --#ARGUMENTS {2} 2287 --#SEVERITY MAJOR 2288 --#TIMEINDEX 99 2289 --#SIMPLE_SEVERITY MAJOR 2290 --#HWSTATUS_CATEGORY NONE 2291 2292 ::= 11003 2293 2294 cpqHo2AppErrorTrap TRAP-TYPE 2295 ENTERPRISE compaq 2296 VARIABLES { sysName, cpqHoTrapFlags, cpqHoSwPerfAppErrorDesc } 2297 DESCRIPTION 2298 "An application has generated an exception. Specific 2299 error information is contained in the variable 2300 cpqHoSwPerfAppErrorDesc." 2301 2302 --#TYPE "Application Error Trap (11004)" 2303 --#SUMMARY "%s" 2304 --#ARGUMENTS {2} 2305 --#SEVERITY MAJOR 2306 --#TIMEINDEX 99 2307 --#SIMPLE_SEVERITY MAJOR 2308 --#HWSTATUS_CATEGORY NONE 2309 2310 ::= 11004 2311 2312 cpqHo2NicStatusOk TRAP-TYPE 2313 ENTERPRISE compaq 2314 VARIABLES { sysName, cpqHoTrapFlags, cpqHoIfPhysMapSlot } 2315 DESCRIPTION 2316 "This trap will be sent any time the status of a NIC changes to 2317 the OK condition." 2318 2319 --#TYPE "Status Trap (11005)" 2320 --#SUMMARY "NIC Status is OK for slot %s." 2321 --#ARGUMENTS {2} 2322 --#SEVERITY MAJOR 2323 --#TIMEINDEX 99 2324 ::= 11005 2325 2326 cpqHo2NicStatusFailed TRAP-TYPE 2327 ENTERPRISE compaq 2328 VARIABLES { sysName, cpqHoTrapFlags, cpqHoIfPhysMapSlot } 2329 DESCRIPTION 2330 "This trap will be sent any time the status of a NIC changes to 2331 the Failed condition." 2332 2333 --#TYPE "Status Trap (11006)" 2334 --#SUMMARY "NIC Status is Failed for slot %s." 2335 --#ARGUMENTS {2} 2336 --#SEVERITY MAJOR 2337 --#TIMEINDEX 99 2338 ::= 11006 2339 2340 cpqHo2NicSwitchoverOccurred TRAP-TYPE 2341 ENTERPRISE compaq 2342 VARIABLES { sysName, cpqHoTrapFlags, cpqHoIfPhysMapSlot, cpqHoIfPhysMapSlot } 2343 DESCRIPTION 2344 "This trap will be sent any time the configured redundant NIC 2345 becomes the active NIC." 2346 2347 --#TYPE "Status Trap (11007)" 2348 --#SUMMARY "NIC switchover to slot %s from slot %s." 2349 --#ARGUMENTS {2, 3} 2350 --#SEVERITY MAJOR 2351 --#TIMEINDEX 99 2352 ::= 11007 2353 2354 2355 cpqHo2NicStatusOk2 TRAP-TYPE 2356 ENTERPRISE compaq 2357 VARIABLES { sysName, cpqHoTrapFlags, cpqHoIfPhysMapSlot, 2358 cpqHoIfPhysMapPort } 2359 DESCRIPTION 2360 "This trap will be sent any time the status of a NIC changes to 2361 the OK condition." 2362 2363 --#TYPE "Status Trap (11008)" 2364 --#SUMMARY "NIC status is ok for slot %s, port %s." 2365 --#ARGUMENTS {2, 3} 2366 --#SEVERITY MAJOR 2367 --#TIMEINDEX 99 2368 --#SIMPLE_SEVERITY OK 2369 --#HWSTATUS_CATEGORY NETWORK 2370 2371 ::= 11008 2372 2373 cpqHo2NicStatusFailed2 TRAP-TYPE 2374 ENTERPRISE compaq 2375 VARIABLES { sysName, cpqHoTrapFlags, cpqHoIfPhysMapSlot, 2376 cpqHoIfPhysMapPort } 2377 DESCRIPTION 2378 "This trap will be sent any time the status of a NIC changes to 2379 the Failed condition." 2380 2381 --#TYPE "Status Trap (11009)" 2382 --#SUMMARY "NIC status is failed for slot %s, port %s." 2383 --#ARGUMENTS {2, 3} 2384 --#SEVERITY MAJOR 2385 --#TIMEINDEX 99 2386 --#SIMPLE_SEVERITY MAJOR 2387 --#HWSTATUS_CATEGORY NETWORK 2388 --#ACTION "Check the network cables. Replace the failed NIC." 2389 2390 ::= 11009 2391 2392 cpqHo2NicSwitchoverOccurred2 TRAP-TYPE 2393 ENTERPRISE compaq 2394 VARIABLES { sysName, cpqHoTrapFlags, cpqHoIfPhysMapSlot, 2395 cpqHoIfPhysMapPort, cpqHoIfPhysMapSlot, 2396 cpqHoIfPhysMapPort } 2397 DESCRIPTION 2398 "This trap will be sent any time the configured redundant NIC 2399 becomes the active NIC." 2400 2401 --#TYPE "Status Trap (11010)" 2402 --#SUMMARY "NIC switchover to slot %s, port %s from slot %s, port %s." 2403 --#ARGUMENTS {2, 3, 4, 5} 2404 --#SEVERITY MAJOR 2405 --#TIMEINDEX 99 2406 --#SIMPLE_SEVERITY MAJOR 2407 --#HWSTATUS_CATEGORY NETWORK 2408 --#ACTION "Examine the network connections and check for a NIC failure." 2409 ::= 11010 2410 2411 cpqHoProcessEventTrap TRAP-TYPE 2412 ENTERPRISE compaq 2413 VARIABLES { sysName, cpqHoTrapFlags, cpqHoSwRunningTrapDesc } 2414 DESCRIPTION 2415 "A monitored process has either started or stopped running." 2416 2417 --#TYPE "Process Monitor Event Trap (11011)" 2418 --#SUMMARY "%s" 2419 --#ARGUMENTS {2} 2420 --#SEVERITY MAJOR 2421 --#TIMEINDEX 99 2422 --#SIMPLE_SEVERITY MAJOR 2423 --#HWSTATUS_CATEGORY NONE 2424 2425 ::= 11011 2426 2427 cpqHoProcessCountWarning TRAP-TYPE 2428 ENTERPRISE compaq 2429 VARIABLES { sysName, cpqHoTrapFlags, cpqHoSWRunningName, cpqHoSWRunningCount, 2430 cpqHoSWRunningCountMin, cpqHoSWRunningCountMax, 2431 cpqHoSWRunningEventTime } 2432 DESCRIPTION 2433 "A monitored process count has violated the thresholds set on cpqHoSWRunningCount" 2434 2435 --#TYPE "Process Count Event Trap (11012)" 2436 --#SUMMARY "Process %s has count %s which violates the thresholds %s to %s." 2437 --#ARGUMENTS {2, 3, 4, 5} 2438 --#SEVERITY MAJOR 2439 --#TIMEINDEX 99 2440 --#STATE DEGRADED 2441 --#SIMPLE_SEVERITY MAJOR 2442 --#HWSTATUS_CATEGORY NONE 2443 2444 ::= 11012 2445 2446 cpqHoProcessCountNormal TRAP-TYPE 2447 ENTERPRISE compaq 2448 VARIABLES { sysName, cpqHoTrapFlags, cpqHoSWRunningName, cpqHoSWRunningCount, 2449 cpqHoSWRunningCountMin, cpqHoSWRunningCountMax, 2450 cpqHoSWRunningEventTime } 2451 DESCRIPTION 2452 "A monitored process count has returned back to normal." 2453 2454 --#TYPE "Process Monitor Event Trap (11013)" 2455 --#SUMMARY "Process %s has count %s which respects the thresholds %s to %s." 2456 --#ARGUMENTS {2, 3, 4, 5} 2457 --#SEVERITY INFORMATIONAL 2458 --#TIMEINDEX 99 2459 --#STATE OPERATIONAL 2460 --#SIMPLE_SEVERITY OK 2461 --#HWSTATUS_CATEGORY NONE 2462 2463 ::= 11013 2464 2465 cpqHoCriticalSoftwareUpdateTrap TRAP-TYPE 2466 ENTERPRISE compaq 2467 VARIABLES { sysName, cpqHoTrapFlags, cpqHoCriticalSoftwareUpdateData } 2468 DESCRIPTION 2469 "This trap is a send to the user to notify him of a Critical Software Update." 2470 2471 --#TYPE "Critical Software update Notification Trap (11014)" 2472 --#SUMMARY "%s" 2473 --#ARGUMENTS {2} 2474 --#SEVERITY CRITICAL 2475 --#TIMEINDEX 99 2476 --#SIMPLE_SEVERITY CRITICAL 2477 --#HWSTATUS_CATEGORY NONE 2478 --#ACTION "Install the required software updates." 2479 2480 ::= 11014 2481 2482 cpqHoCrashDumpNotEnabledTrap TRAP-TYPE 2483 ENTERPRISE compaq 2484 VARIABLES { sysName, cpqHoTrapFlags, cpqHoCrashDumpState } 2485 DESCRIPTION 2486 "This trap is sent to the user to notify him that the Crash Dump is not enabled. 2487 This trap is not sent if cpqHoCrashDumpMonitoring is disabled." 2488 2489 --#TYPE "Crash Dump not enabled Notification Trap (11015)" 2490 --#SUMMARY "Crash dump is not enabled." 2491 --#ARGUMENTS {} 2492 --#SEVERITY WARNING 2493 --#TIMEINDEX 99 2494 --#SIMPLE_SEVERITY MAJOR 2495 --#HWSTATUS_CATEGORY NONE 2496 2497 ::= 11015 2498 2499 2500 cpqHoBootPagingFileTooSmallTrap TRAP-TYPE 2501 ENTERPRISE compaq 2502 VARIABLES { sysName, cpqHoTrapFlags, cpqHoCrashDumpState, cpqHoBootPagingFileSize, cpqHoBootPagingFileMinimumSize } 2503 DESCRIPTION 2504 "This trap is sent when the paging file size of the boot volume or the target volume of the memory dump file is too small to hold a crash dump. 2505 This trap is not sent if cpqHoCrashDumpMonitoring is disabled." 2506 2507 --#TYPE "Boot Paging File Or Memory Dump Target Volume Too Small Notification Trap (11016)" 2508 --#SUMMARY "The paging file size of the boot volume (%s) or the target volume of the memory dump file is not large enough to hold a crash dump in the event of a system crash (%s)." 2509 --#ARGUMENTS {3, 4} 2510 --#SEVERITY WARNING 2511 --#TIMEINDEX 99 2512 2513 ::= 11016 2514 2515 cpqHoSWRunningStatusChangeTrap TRAP-TYPE 2516 ENTERPRISE compaq 2517 VARIABLES { sysName, cpqHoTrapFlags, cpqHoSWRunningName, cpqHoSWRunningDesc,cpqHoSwRunningTrapDesc, cpqHoSWRunningVersion,cpqHoSWRunningStatus, cpqHoSWRunningConfigStatus, cpqHoSWRunningIdentifier, cpqHoSWRunningRedundancyMode } 2518 DESCRIPTION 2519 "This trap notifies the user that the running software has changed status, configuration status, or redundancy mode." 2520 2521 --#TYPE "Software status change Notification Trap (11017)" 2522 --#SUMMARY "Software status change for %s, description = %s, id = %s" 2523 --#ARGUMENTS {2, 4, 8} 2524 --#SEVERITY WARNING 2525 --#TIMEINDEX 99 2526 --#SIMPLE_SEVERITY MAJOR 2527 --#HWSTATUS_CATEGORY NONE 2528 2529 ::= 11017 2530 2531 cpqHo2PowerThresholdTrap TRAP-TYPE 2532 ENTERPRISE compaq 2533 VARIABLES { sysName, cpqHoTrapFlags, cpqPwrWarnType, cpqPwrWarnThreshold, cpqPwrWarnDuration, cpqSerialNum, cpqServerUUID } 2534 DESCRIPTION 2535 -- This trap notifies user of a power threshold breach. 2536 "Power threshold exceeded." 2537 2538 --#TYPE "Power Threshold Exceeded (11018)" 2539 --#SUMMARY "Power threshold has been exceeded (Warning Type: %s, Threshold: %d watts, Duration: %d minutes)" 2540 --#ARGUMENTS {2, 3, 4} 2541 --#SEVERITY MINOR 2542 --#TIMEINDEX 99 2543 --#SIMPLE_SEVERITY MAJOR 2544 --#HWSTATUS_CATEGORY POWER 2545 2546 ::= 11018 2547 2548 cpqHoBootPagingFileOrFreeSpaceTooSmallTrap TRAP-TYPE 2549 ENTERPRISE compaq 2550 VARIABLES { sysName, cpqHoTrapFlags, cpqHoCrashDumpState, cpqHoBootPagingFileSize, cpqHoBootPagingFileVolumeFreeSpace, cpqHoBootPagingFileMinimumSize } 2551 DESCRIPTION 2552 "This trap is sent when the paging file size of the boot volume or the free space of memory dump target volume is too small to hold a crash dump." 2553 --#TYPE "Boot Paging File Or Memory Dump Target Volume Too Small Notification Trap (11016)" 2554 --#SUMMARY "The paging file size of the boot volume (%s) or the free space of the memory dump target volume (%s) is not large enough to hold a crash dump in the event of a system crash (%s)." 2555 --#ARGUMENTS {3, 4, 5} 2556 --#SEVERITY WARNING 2557 --#TIMEINDEX 99 2558 --#SIMPLE_SEVERITY MAJOR 2559 --#HWSTATUS_CATEGORY NONE 2560 2561 ::= 11019 2562 2563 cpqHoMibHealthStatusArrayChangeTrap TRAP-TYPE 2564 ENTERPRISE compaq 2565 VARIABLES { sysName, cpqHoTrapFlags, cpqHoMibHealthStatusArray } 2566 DESCRIPTION 2567 "A change in the cpqHoMibHealthStatusArray has occurred." 2568 --#TYPE "Health Status Array Change occurred (11020)" 2569 --#SUMMARY "A change in the health status of the server has occurred, the status is now %s" 2570 --#ARGUMENTS {2} 2571 --#SEVERITY INFORMATIONAL 2572 --#TIMEINDEX 99 2573 --#SIMPLE_SEVERITY OK 2574 --#HWSTATUS_CATEGORY MANAGEMENTPROCESSOR 2575 2576 ::= 11020 2577 2578 2579 END 2580 2581