1-- **************************************************************************** 2-- 3-- System Information 4-- Management Information Base for SNMP Network Management 5-- 6-- 7-- Copyright 1992,2008 Hewlett-Packard Development Company, L.P. 8-- 9-- Hewlett-Packard Company shall not be liable for technical or 10-- editorial errors or omissions contained herein. The information in 11-- this document is provided "as is" without warranty of any kind and 12-- is subject to change without notice. The warranties for HP products 13-- are set forth in the express limited warranty statements 14-- accompanying such products. Nothing herein should be construed as 15-- constituting an additional warranty. 16-- 17-- Confidential computer software. Valid license from HP required for 18-- possession, use or copying. Consistent with FAR 12.211 and 12.212, 19-- Commercial Computer Software, Computer Software Documentation, and 20-- Technical Data for Commercial Items are licensed to the U.S. 21-- Government under vendor's standard commercial license. 22-- 23-- Refer to the READMIB.RDM file for more information about the 24-- organization of the information in the Compaq Enterprise. 25-- 26-- The Compaq Enterprise number is 232. 27-- The ASN.1 prefix to, and including the Compaq Enterprise is: 28-- 1.3.6.1.4.1.232 29-- 30-- **************************************************************************** 31 32CPQSINFO-MIB DEFINITIONS ::= BEGIN 33 34 IMPORTS 35 compaq FROM CPQHOST-MIB 36 DisplayString FROM RFC1213-MIB 37 OBJECT-TYPE FROM RFC-1212 38 sysName FROM RFC1213-MIB 39 cpqHoTrapFlags FROM CPQHOST-MIB 40 TRAP-TYPE FROM RFC-1215; 41 42 43-- compaq OBJECT IDENTIFIER ::= { enterprises 232 } 44 cpqSystemInfo OBJECT IDENTIFIER ::= { compaq 2 } 45 cpqSiMibRev OBJECT IDENTIFIER ::= { cpqSystemInfo 1 } 46 cpqSiComponent OBJECT IDENTIFIER ::= { cpqSystemInfo 2 } 47 48 cpqSiInterface OBJECT IDENTIFIER ::= { cpqSiComponent 1 } 49 cpqSiAsset OBJECT IDENTIFIER ::= { cpqSiComponent 2 } 50 cpqSiSecurity OBJECT IDENTIFIER ::= { cpqSiComponent 3 } 51 cpqSiSystemBoard OBJECT IDENTIFIER ::= { cpqSiComponent 4 } 52 cpqSiBoardRev OBJECT IDENTIFIER ::= { cpqSiComponent 5 } 53 cpqSiRackServer OBJECT IDENTIFIER ::= { cpqSiComponent 6 } 54 cpqSiVideo OBJECT IDENTIFIER ::= { cpqSiComponent 7 } 55 cpqSiMonitor OBJECT IDENTIFIER ::= { cpqSiComponent 8 } 56 cpqSiHotPlugSlot OBJECT IDENTIFIER ::= { cpqSiComponent 9 } 57 cpqSiSystemBattery OBJECT IDENTIFIER ::= { cpqSiComponent 10 } 58 cpqSiDockingStation OBJECT IDENTIFIER ::= { cpqSiComponent 11 } 59 cpqSiFru OBJECT IDENTIFIER ::= { cpqSiComponent 12 } 60 cpqSiRackEnclosure OBJECT IDENTIFIER ::= { cpqSiComponent 13 } 61 cpqSiServerBlade OBJECT IDENTIFIER ::= { cpqSiComponent 14 } 62 cpqSiRack OBJECT IDENTIFIER ::= { cpqSiComponent 15 } 63 cpqSiMP OBJECT IDENTIFIER ::= { cpqSiComponent 16 } 64 65 cpqSiOsCommon OBJECT IDENTIFIER ::= { cpqSiInterface 4 } 66 67-- **************************************************************************** 68-- System Information MIB Revision 69-- =============================== 70-- 71-- The compaq enterprise (1.3.6.1.4.1.232) 72-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 73-- cpqSiMibRev Group (1.3.6.1.4.1.232.2.1) 74-- 75-- Implementation of the MibRev group is mandatory for all Insight Agents 76-- supporting the System Information MIB. 77-- 78-- An Agent conforming to this document will return a 79-- cpqSiMibRevMajor of one (1) and a cpqSiMibRevMinor of thirty-seven (39). 80-- 81-- 82-- **************************************************************************** 83 84 cpqSiMibRevMajor OBJECT-TYPE 85 SYNTAX INTEGER (1..65535) 86 ACCESS read-only 87 STATUS mandatory 88 DESCRIPTION 89 "The major revision level of the MIB. 90 91 A change in the major revision level represents a major change 92 in the architecture of the MIB. A change in the major revision 93 level may indicate a significant change in the information 94 supported and/or the meaning of the supported information, 95 correct interpretation of data may require a MIB document with 96 the same major revision level." 97 ::= { cpqSiMibRev 1 } 98 99 cpqSiMibRevMinor OBJECT-TYPE 100 SYNTAX INTEGER (0..65535) 101 ACCESS read-only 102 STATUS mandatory 103 DESCRIPTION 104 "The minor revision level of the MIB. 105 106 A change in the minor revision level may represent some minor 107 additional support, no changes to any pre-existing information 108 has occurred." 109 ::= { cpqSiMibRev 2 } 110 111 cpqSiMibCondition OBJECT-TYPE 112 SYNTAX INTEGER { 113 other(1), 114 ok(2), -- default 115 degraded(3), 116 failed(4) 117 } 118 ACCESS read-only 119 STATUS mandatory 120 DESCRIPTION 121 "The overall condition. 122 123 This object represents the overall status of the server 124 information represented by this MIB." 125 ::= { cpqSiMibRev 3 } 126 127-- **************************************************************************** 128-- System Information Common 129-- ========================= 130-- 131-- The compaq enterprise (1.3.6.1.4.1.232) 132-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 133-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 134-- cpqSiInterface Group (1.3.6.1.4.1.232.2.2.1) 135-- cpqSiOsCommon Group (1.3.6.1.4.1.232.2.2.1.4) 136-- 137-- 138-- Implementation of the cpqSiOsCommon group is mandatory for all 139-- Insight Agents that support the System Information MIB. 140-- 141-- **************************************************************************** 142 143 cpqSiOsCommonPollFreq OBJECT-TYPE 144 SYNTAX INTEGER (0..65535) 145 ACCESS read-write 146 STATUS mandatory 147 DESCRIPTION 148 "The Insight Agent's polling frequency. 149 150 The frequency, in seconds, at which the Insight Agent requests 151 information from the device driver. A frequency of zero (0) 152 indicates that the Insight Agent retrieves the information upon 153 request of a management station, it does not poll the device 154 driver at a specific interval. 155 156 If the poll frequency is zero (0) all attempts to write to this 157 object will fail. If the poll frequency is non-zero, 158 setting this value will change the polling frequency of the 159 Insight Agent. Setting the poll frequency to zero (0) will 160 always fail, an agent may also choose to fail any request to 161 change the poll frequency to a value that would severely impact 162 system performance." 163 ::= { cpqSiOsCommon 1 } 164 165 166-- **************************************************************************** 167-- System Information Common Module Table 168-- ====================================== 169-- 170-- The compaq enterprise (1.3.6.1.4.1.232) 171-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 172-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 173-- cpqSiInterface Group (1.3.6.1.4.1.232.2.2.1) 174-- cpqSiOsCommon Group (1.3.6.1.4.1.232.2.2.1.4) 175-- cpqSiOsCommonModuleTable (1.3.6.1.4.1.232.2.2.1.4.2) deprecated 176-- 177-- **************************************************************************** 178 179 cpqSiOsCommonModuleTable OBJECT-TYPE 180 SYNTAX SEQUENCE OF CpqSiOsCommonModuleEntry 181 ACCESS not-accessible 182 STATUS deprecated 183 DESCRIPTION 184 "A table of software modules that provide an interface to the 185 device this MIB describes." 186 ::= { cpqSiOsCommon 2 } 187 188 cpqSiOsCommonModuleEntry OBJECT-TYPE 189 SYNTAX CpqSiOsCommonModuleEntry 190 ACCESS not-accessible 191 STATUS deprecated 192 DESCRIPTION 193 "A description of a software module that provides an interface 194 to the device this MIB describes." 195 INDEX { cpqSiOsCommonModuleIndex } 196 ::= { cpqSiOsCommonModuleTable 1 } 197 198 CpqSiOsCommonModuleEntry ::= SEQUENCE { 199 cpqSiOsCommonModuleIndex INTEGER, 200 cpqSiOsCommonModuleName DisplayString, 201 cpqSiOsCommonModuleVersion DisplayString, 202 cpqSiOsCommonModuleDate OCTET STRING, 203 cpqSiOsCommonModulePurpose DisplayString 204 } 205 206 cpqSiOsCommonModuleIndex OBJECT-TYPE 207 SYNTAX INTEGER (0..255) 208 ACCESS read-only 209 STATUS deprecated 210 DESCRIPTION 211 "A unique index for this module description." 212 ::= { cpqSiOsCommonModuleEntry 1 } 213 214 cpqSiOsCommonModuleName OBJECT-TYPE 215 SYNTAX DisplayString (SIZE (0..255)) 216 ACCESS read-only 217 STATUS deprecated 218 DESCRIPTION 219 "The module name." 220 ::= { cpqSiOsCommonModuleEntry 2 } 221 222 cpqSiOsCommonModuleVersion OBJECT-TYPE 223 SYNTAX DisplayString (SIZE (0..5)) 224 ACCESS read-only 225 STATUS deprecated 226 DESCRIPTION 227 "The module version in XX.YY format. 228 229 Where XX is the major version number and YY is the minor version 230 number. This field will be a null (size 0) string if the agent 231 cannot provide the module version." 232 ::= { cpqSiOsCommonModuleEntry 3 } 233 234 cpqSiOsCommonModuleDate OBJECT-TYPE 235 SYNTAX OCTET STRING (SIZE (7)) 236 ACCESS read-only 237 STATUS deprecated 238 DESCRIPTION 239 "The module date. 240 241 field octets contents range 242 ===== ====== ======= ===== 243 1 1-2 year 0..65536 244 2 3 month 1..12 245 3 4 day 1..31 246 4 5 hour 0..23 247 5 6 minute 0..59 248 6 7 second 0..60 249 (use 60 for leap-second) 250 251 252 This field will be set to year = 0 if the agent cannot provide 253 the module date. The hour, minute, and second field will be set 254 to zero (0) if they are not relevant. The year field is set 255 with the most significant octet first." 256 ::= { cpqSiOsCommonModuleEntry 4 } 257 258 cpqSiOsCommonModulePurpose OBJECT-TYPE 259 SYNTAX DisplayString (SIZE (0..255)) 260 ACCESS read-only 261 STATUS deprecated 262 DESCRIPTION 263 "The purpose of the module described in this entry." 264 ::= { cpqSiOsCommonModuleEntry 5 } 265 266-- **************************************************************************** 267-- System Information Asset Group 268-- ============================== 269-- 270-- The compaq enterprise (1.3.6.1.4.1.232) 271-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 272-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 273-- cpqSiAsset Group (1.3.6.1.4.1.232.2.2.2) 274-- 275-- The cpqSiAsset group contains the serial numbers of any hardware 276-- that supports asset management. 277-- 278-- Implementation of the cpqSiAsset group is mandatory for all Insight 279-- Agents that support the System Information MIB. 280-- 281-- **************************************************************************** 282 283 cpqSiSysSerialNum OBJECT-TYPE 284 SYNTAX DisplayString (SIZE (0..255)) 285 ACCESS read-only 286 STATUS mandatory 287 DESCRIPTION 288 "The serial number of the physical system unit. 289 290 The string will be empty if the system does not report the 291 serial number function." 292 ::= { cpqSiAsset 1 } 293 294 cpqSiFormFactor OBJECT-TYPE 295 SYNTAX INTEGER { 296 unknown(1), 297 portable(2), 298 laptop(3), 299 desktop(4), 300 tower(5), 301 mini-tower(6), 302 rack-mount(7), 303 nultiboard-chasis(8) 304 } 305 ACCESS read-write 306 STATUS mandatory 307 DESCRIPTION 308 "The form factor of the system. Setting this variable to 309 unknown will fail." 310 ::= { cpqSiAsset 2 } 311 312 cpqSiAssetTag OBJECT-TYPE 313 SYNTAX DisplayString (SIZE (0..255)) 314 ACCESS read-write 315 STATUS mandatory 316 DESCRIPTION 317 "The customer changeable identifier that is set to the system 318 serial number at the time of manufacture. 319 320 The string will be empty if the system does not report this 321 function." 322 ::= { cpqSiAsset 3 } 323 324 cpqSiOwnershipTag OBJECT-TYPE 325 SYNTAX DisplayString (SIZE (0..79)) 326 ACCESS read-only 327 STATUS mandatory 328 DESCRIPTION 329 "This is a customer changeable identifier that will be 330 displayed by ROM at POST. This is an 80 byte standard 331 ASCII character string and is Administrator Password 332 protected. 333 334 An example could be: 335 Property of Hewlett-Packard Company 336 337 The string should be NULL terminated. This item will be 338 empty if the system does not report this function." 339 ::= { cpqSiAsset 4 } 340 341 cpqSiSysServiceNum OBJECT-TYPE 342 SYNTAX DisplayString (SIZE (0..255)) 343 ACCESS read-only 344 STATUS mandatory 345 DESCRIPTION 346 "The service number of the system unit. 347 348 The string will be empty if the system does not report the 349 system service number." 350 ::= { cpqSiAsset 5 } 351 352 cpqSiSysProductId OBJECT-TYPE 353 SYNTAX DisplayString (SIZE (0..255)) 354 ACCESS read-only 355 STATUS mandatory 356 DESCRIPTION 357 "The product id string of the system unit. 358 359 The string will be empty if the system does not report the 360 product id." 361 ::= { cpqSiAsset 6 } 362 363 cpqSiAssetTagMaxLength OBJECT-TYPE 364 SYNTAX INTEGER 365 ACCESS read-only 366 STATUS optional 367 DESCRIPTION 368 " Maximum allowed size in bytes of the asset tag." 369 370 ::= { cpqSiAsset 7 } 371 372-- **************************************************************************** 373-- Virtual System Information Table 374-- ================================ 375-- 376-- The compaq enterprise (1.3.6.1.4.1.232) 377-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 378-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 379-- cpqSiAsset Group (1.3.6.1.4.1.232.2.2.2) 380-- cpqSiVirtualSystemTable (1.3.6.1.4.1.232.2.2.2.8) 381-- cpqSiVirtualSystemEntry (1.3.6.1.4.1.232.2.2.2.8.1) 382-- 383-- **************************************************************************** 384 385 cpqSiVirtualSystemTable OBJECT-TYPE 386 SYNTAX SEQUENCE OF CpqSiVirtualSystemEntry 387 ACCESS not-accessible 388 STATUS optional 389 DESCRIPTION 390 "A table of virtual system information entries." 391 ::= { cpqSiAsset 8 } 392 393 cpqSiVirtualSystemEntry OBJECT-TYPE 394 SYNTAX CpqSiVirtualSystemEntry 395 ACCESS not-accessible 396 STATUS optional 397 DESCRIPTION 398 "A virtual system information table entry." 399 INDEX { cpqSiVirtualSystemIndex } 400 ::= { cpqSiVirtualSystemTable 1 } 401 402 CpqSiVirtualSystemEntry ::= SEQUENCE { 403 cpqSiVirtualSystemIndex INTEGER, 404 cpqSiVirtualSystemSerialNumber DisplayString, 405 cpqSiVirtualSystemUUID DisplayString 406 } 407 408 cpqSiVirtualSystemIndex OBJECT-TYPE 409 SYNTAX INTEGER (0..255) 410 ACCESS read-only 411 STATUS optional 412 DESCRIPTION 413 "The unique index of the virtual system information entry." 414 ::= { cpqSiVirtualSystemEntry 1 } 415 416 cpqSiVirtualSystemSerialNumber OBJECT-TYPE 417 SYNTAX DisplayString 418 ACCESS read-only 419 STATUS optional 420 DESCRIPTION 421 "The HP Virtual Serial Number for the computer system package. The Virtual 422 Serial Number is the system serial number exposed to the operating 423 system when running in an HP Virtual Connect environment. The Virtual 424 Serial Number presented here will correspond to the Virtual UUID at the 425 same index location." 426 ::= { cpqSiVirtualSystemEntry 2 } 427 428 cpqSiVirtualSystemUUID OBJECT-TYPE 429 SYNTAX DisplayString 430 ACCESS read-only 431 STATUS optional 432 DESCRIPTION 433 "The HP Virtual UUID for the computer system package. The Virtual 434 UUID is the UUID number exposed to the operating system when running 435 in an HP Virtual Connect environment. The Virtual UUID presented 436 here will correspond to the Virtual serial number at the same index 437 location." 438 ::= { cpqSiVirtualSystemEntry 3 } 439 440 441-- **************************************************************************** 442-- System Information Security Group 443-- ================================= 444-- 445-- The compaq enterprise (1.3.6.1.4.1.232) 446-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 447-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 448-- cpqSiSecurity Group (1.3.6.1.4.1.232.2.2.3) 449-- 450-- The Security group describes how the security features on your 451-- computer are currently configured. 452-- 453-- Implementation of the security group is mandatory for all agents that 454-- support the System Information MIB. 455-- 456-- **************************************************************************** 457 458 cpqSiPowerOnPassword OBJECT-TYPE 459 SYNTAX INTEGER { 460 other(1), 461 disabled(2), 462 enabled(3) 463 } 464 ACCESS read-only 465 STATUS mandatory 466 DESCRIPTION 467 "The state of the power on password feature." 468 ::= { cpqSiSecurity 1 } 469 470 cpqSiNetServerMode OBJECT-TYPE 471 SYNTAX INTEGER { 472 other(1), 473 disabled(2), 474 enabled(3) 475 } 476 ACCESS read-only 477 STATUS mandatory 478 DESCRIPTION 479 "The state of the network server mode feature." 480 ::= { cpqSiSecurity 2 } 481 482 cpqSiQuickLockPassword OBJECT-TYPE 483 SYNTAX INTEGER { 484 other(1), 485 disabled(2), 486 enabled(3) 487 } 488 ACCESS read-only 489 STATUS mandatory 490 DESCRIPTION 491 "The state of the quicklock password feature." 492 ::= { cpqSiSecurity 3 } 493 494 cpqSiQuickBlank OBJECT-TYPE 495 SYNTAX INTEGER { 496 other(1), 497 disabled(2), 498 enabled(3) 499 } 500 ACCESS read-only 501 STATUS mandatory 502 DESCRIPTION 503 "The state of the quick blank screen feature." 504 ::= { cpqSiSecurity 4 } 505 506 cpqSiDisketteBootControl OBJECT-TYPE 507 SYNTAX INTEGER { 508 other(1), 509 disabled(2), 510 enabled(3) 511 } 512 ACCESS read-only 513 STATUS mandatory 514 DESCRIPTION 515 "The state of the diskette boot control feature." 516 ::= { cpqSiSecurity 5 } 517 518 cpqSiSerialPortAControl OBJECT-TYPE 519 SYNTAX INTEGER { 520 other(1), 521 disabled(2), 522 enabled(3) 523 } 524 ACCESS read-only 525 STATUS mandatory 526 DESCRIPTION 527 "The state of the access control for the primary serial port 528 interface embedded in the system board." 529 ::= { cpqSiSecurity 6 } 530 531 cpqSiSerialPortBControl OBJECT-TYPE 532 SYNTAX INTEGER { 533 other(1), 534 disabled(2), 535 enabled(3) 536 } 537 ACCESS read-only 538 STATUS mandatory 539 DESCRIPTION 540 "The state of the access control for the secondary serial port 541 interface embedded in the system board." 542 ::= { cpqSiSecurity 7 } 543 544 cpqSiParallelPortControl OBJECT-TYPE 545 SYNTAX INTEGER { 546 other(1), 547 disabled(2), 548 enabled(3) 549 } 550 ACCESS read-only 551 STATUS mandatory 552 DESCRIPTION 553 "The state of the access control for the parallel port interface 554 embedded in the system board." 555 ::= { cpqSiSecurity 8 } 556 557 cpqSiFloppyDiskControl OBJECT-TYPE 558 SYNTAX INTEGER { 559 other(1), 560 disabled(2), 561 enabled(3) 562 } 563 ACCESS read-only 564 STATUS mandatory 565 DESCRIPTION 566 "The state of the access control for the floppy diskette 567 interface embedded in the system board." 568 ::= { cpqSiSecurity 9 } 569 570 cpqSiFixedDiskControl OBJECT-TYPE 571 SYNTAX INTEGER { 572 other(1), 573 disabled(2), 574 enabled(3) 575 } 576 ACCESS read-only 577 STATUS mandatory 578 DESCRIPTION 579 "The state of the access control for the fixed disk interface 580 embedded in the system board." 581 ::= { cpqSiSecurity 10 } 582 583 cpqSiHoodRemovedTime OBJECT-TYPE 584 SYNTAX DisplayString (SIZE (0..255)) 585 ACCESS read-only 586 STATUS mandatory 587 DESCRIPTION 588 "Last detection of hood removed by Smart Hood Sensor." 589 590 ::= { cpqSiSecurity 11 } 591 592 cpqSiHoodSensorConfiguration OBJECT-TYPE 593 SYNTAX INTEGER { 594 other(1), 595 disabled(2), 596 notifyUser(3), 597 adminPasswordProtected(4) 598 } 599 ACCESS read-only 600 STATUS mandatory 601 DESCRIPTION 602 "This is the current configuration of the Smart Cover 603 sensor. 604 605 The following values are currently defined: 606 607 other(1) 608 Smart Cover sensor is not supported on this system or cannot 609 be determined by the Insight Agent. You may need to upgrade 610 your software. 611 612 disabled(2) 613 Smart Cover sensor will not detect a hood removal and 614 cpqSiHoodRemovedTime will not be updated. 615 616 notifyUser(3) 617 Smart Cover sensor will detect a hood removal and will display 618 a message at POST for the user. 619 620 adminPasswordProtected(4) 621 Smart Cover sensor will detect a hood removal and will display 622 a message at POST for the user to enter the Admin Password. 623 The system will not boot until proper password is entered." 624 ::= { cpqSiSecurity 12 } 625 626 627 cpqSiSmartCoverLockStatus OBJECT-TYPE 628 SYNTAX INTEGER { 629 other(1), 630 unlocked(2), 631 locked(3) 632 } 633 ACCESS read-only 634 STATUS mandatory 635 DESCRIPTION 636 "This is the current status of the Smart Cover 637 Lock. The following values are currently defined: 638 639 other(1) 640 Smart Cover Lock is not supported on this system or cannot 641 be determined by the Insight Agent. You may need to upgrade 642 your software. 643 644 unlocked(2) 645 Smart Cover Lock is not locked. The status will be set to 646 unlocked due to one of the following: 647 1. The system hood is removed, or 648 2. There is no administrator password set, or 649 3. The administrator manually sets status to unlock. 650 651 locked(3) 652 Smart Cover Lock is locked. The administrator password is 653 required to unlock the hood." 654 ::= { cpqSiSecurity 13 } 655 656 cpqSiUSBPortControl OBJECT-TYPE 657 SYNTAX INTEGER { 658 other(1), 659 disabled(2), 660 enabled(3), 661 legacydisabled(4), 662 externalportdisabled(5) 663 } 664 ACCESS read-only 665 STATUS mandatory 666 DESCRIPTION 667 "The state of the access control for the Universal 668 Serial Bus interface(s) embedded in the system 669 board. 670 671 other(1) 672 If Status could not be determined. 673 674 disabled(2) 675 USB interface is disable. 676 677 enabled(3) 678 USB interface is enable. 679 680 legacydisabled(4) 681 Legacy USB interface is disabled. 682 683 externalportdisabled(5) 684 External USB Ports are disabled." 685 ::= { cpqSiSecurity 14 } 686 687 cpqSiVirtualSerialPortControl OBJECT-TYPE 688 SYNTAX INTEGER { 689 other(1), 690 disabled(2), 691 enabled(3) 692 } 693 ACCESS read-only 694 STATUS mandatory 695 DESCRIPTION 696 "The state of the access control for the virtual serial port interface 697 embedded in the system board." 698 ::= { cpqSiSecurity 15 } 699 700-- **************************************************************************** 701-- System Information System Board Group 702-- ===================================== 703-- 704-- The compaq enterprise (1.3.6.1.4.1.232) 705-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 706-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 707-- cpqSiSystemBoard Group (1.3.6.1.4.1.232.2.2.4) 708-- 709-- The cpqSiSystemBoard group describe features of your computer 710-- system board. 711-- 712-- Implementation of the cpqSiSystemBoard group is mandatory for all agents 713-- that support the System Information MIB. 714-- 715-- **************************************************************************** 716 717 cpqSiProductId OBJECT-TYPE 718 SYNTAX INTEGER (1..65535) 719 ACCESS read-only 720 STATUS mandatory 721 DESCRIPTION 722 "The machine product ID. 723 724 This value indicates the product type of the system board 725 in this system. The value 127 will be given if the machine ID 726 cannot be determined. A value of 127 will also be used for the 727 special case of a machine containing neither EISA nor ISA slots." 728 ::= { cpqSiSystemBoard 1 } 729 730 cpqSiProductName OBJECT-TYPE 731 SYNTAX DisplayString (SIZE (0..255)) 732 ACCESS read-only 733 STATUS mandatory 734 DESCRIPTION 735 "The machine product name. 736 737 The name of the machine used in this system." 738 ::= { cpqSiSystemBoard 2 } 739 740 cpqSiAuxiliaryInput OBJECT-TYPE 741 SYNTAX INTEGER { 742 other(1), 743 disabled(2), 744 enabled(3) 745 } 746 ACCESS read-only 747 STATUS mandatory 748 DESCRIPTION 749 "The state of the auxiliary input (pointing) device." 750 ::= { cpqSiSystemBoard 4 } 751 752-- **************************************************************************** 753-- System Information Memory Module Table 754-- ====================================== 755-- 756-- The compaq enterprise (1.3.6.1.4.1.232) 757-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 758-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 759-- cpqSiSystemBoard Group (1.3.6.1.4.1.232.2.2.4) 760-- cpqSiMemModuleTable (1.3.6.1.4.1.232.2.2.4.5) 761-- cpqSiMemModuleEntry (1.3.6.1.4.1.232.2.2.4.5.1) 762-- 763-- **************************************************************************** 764-- Deprecated this table in 8.20 time frame please use the 765-- cpqHeResMem2ModuleTable tables to get value 766 767 cpqSiMemModuleTable OBJECT-TYPE 768 SYNTAX SEQUENCE OF CpqSiMemModuleEntry 769 ACCESS not-accessible 770 STATUS mandatory 771 DESCRIPTION 772 "A table of memory module descriptions." 773 ::= { cpqSiSystemBoard 5 } 774 775 cpqSiMemModuleEntry OBJECT-TYPE 776 SYNTAX CpqSiMemModuleEntry 777 ACCESS not-accessible 778 STATUS mandatory 779 DESCRIPTION 780 "A memory module description." 781 INDEX { cpqSiMemBoardIndex , cpqSiMemModuleIndex } 782 ::= { cpqSiMemModuleTable 1 } 783 784 CpqSiMemModuleEntry ::= SEQUENCE { 785 cpqSiMemBoardIndex INTEGER, 786 cpqSiMemModuleIndex INTEGER, 787 cpqSiMemModuleSize INTEGER, 788 cpqSiMemModuleType INTEGER, 789 cpqSiMemModuleSpeed INTEGER, -- deprecated 790 cpqSiMemModuleTechnology INTEGER, 791 cpqSiMemModuleManufacturer DisplayString, 792 cpqSiMemModulePartNo DisplayString, 793 cpqSiMemModuleDate OCTET STRING, 794 cpqSiMemModuleSerialNo DisplayString, 795 cpqSiMemModuleECCStatus INTEGER, 796 cpqSiMemModuleHwLocation DisplayString, 797 cpqSiMemModuleFrequency INTEGER, 798 cpqSiMemModuleCellTablePtr INTEGER, 799 cpqSiMemModuleCellStatus INTEGER, 800 cpqSiMemModulePartNoMfgr DisplayString, 801 cpqSiMemModuleSerialNoMfgr DisplayString 802 } 803 804 cpqSiMemBoardIndex OBJECT-TYPE 805 SYNTAX INTEGER (0..255) 806 ACCESS read-only 807 STATUS mandatory 808 DESCRIPTION 809 "The slot in which the memory board or cartridge is installed. 810 811 A value of 0 indicates memory installed directly on the 812 system board." 813 ::= { cpqSiMemModuleEntry 1 } 814 815 cpqSiMemModuleIndex OBJECT-TYPE 816 SYNTAX INTEGER (0..65535) 817 ACCESS read-only 818 STATUS mandatory 819 DESCRIPTION 820 "The memory module number." 821 ::= { cpqSiMemModuleEntry 2 } 822 823 cpqSiMemModuleSize OBJECT-TYPE 824 SYNTAX INTEGER (0..2147483647) 825 ACCESS read-only 826 STATUS mandatory 827 DESCRIPTION 828 "Module memory size in kilobytes. A kilobyte of memory is 829 defined as 1024 bytes. 830 831 A size of 0 indicates the module is not present." 832 ::= { cpqSiMemModuleEntry 3 } 833 834 cpqSiMemModuleType OBJECT-TYPE 835 SYNTAX INTEGER { 836 other(1), 837 board(2), 838 cpqSingleWidthModule(3), 839 cpqDoubleWidthModule(4), 840 simm(5), 841 pcmcia(6), 842 compaq-specific(7), 843 dimm(8), 844 smallOutlineDimm(9), 845 rimm(10), 846 srimm(11), 847 fb-dimm(12) 848 } 849 ACCESS read-only 850 STATUS mandatory 851 DESCRIPTION 852 "Type of memory module installed. The value other(1) will be 853 given if the type is not known. The value board(2) will be 854 given if the memory module is permanently mounted (not modular) 855 on a system board or memory expansion board." 856 ::= { cpqSiMemModuleEntry 4 } 857 858 cpqSiMemModuleSpeed OBJECT-TYPE 859 SYNTAX INTEGER (0..65535) 860 ACCESS read-only 861 STATUS deprecated 862 DESCRIPTION 863 "Module memory speed in nanoseconds. The value zero (0) will 864 be given if the module speed cannot be determined." 865 ::= { cpqSiMemModuleEntry 5 } 866 867 cpqSiMemModuleTechnology OBJECT-TYPE 868 SYNTAX INTEGER { 869 other(1), 870 fastPageMode(2), 871 edoPageMode(3), 872 burstEdoPageMode(4), 873 synchronous(5), 874 rdram(6) 875 } 876 ACCESS read-only 877 STATUS mandatory 878 DESCRIPTION 879 "Technology type of memory module installed. The value other(1) 880 will be given if the technology is not known." 881 ::= { cpqSiMemModuleEntry 6 } 882 883 cpqSiMemModuleManufacturer OBJECT-TYPE 884 SYNTAX DisplayString (SIZE (0..255)) 885 ACCESS read-only 886 STATUS mandatory 887 DESCRIPTION 888 "The memory module's manufacturer name. 889 890 This field will be a null (size 0) string if the manufacturer 891 name is not available." 892 ::= { cpqSiMemModuleEntry 7 } 893 894 cpqSiMemModulePartNo OBJECT-TYPE 895 SYNTAX DisplayString (SIZE (0..255)) 896 ACCESS read-only 897 STATUS mandatory 898 DESCRIPTION 899 "The memory module's manufacturer part number. 900 901 This field will be a null (size 0) string if the manufacturer 902 part number is not available." 903 ::= { cpqSiMemModuleEntry 8 } 904 905 cpqSiMemModuleDate OBJECT-TYPE 906 SYNTAX OCTET STRING (SIZE (7)) 907 ACCESS read-only 908 STATUS mandatory 909 DESCRIPTION 910 "The memory module date of manufacture. 911 912 field octets contents range 913 ===== ====== ====================== ======== 914 1 1-2 year 0..65536 915 2 3 month 1..12 916 3 4 day 1..31 917 4 5 hour 0..23 918 5 6 minute 0..59 919 6 7 second 0..60 920 (use 60 for leap-second) 921 922 This field will be set to year = 0 if the date of manufacture 923 is not available. The hour, minute, and second fields will 924 always be set to 0." 925 ::= { cpqSiMemModuleEntry 9 } 926 927 cpqSiMemModuleSerialNo OBJECT-TYPE 928 SYNTAX DisplayString (SIZE (0..255)) 929 ACCESS read-write 930 STATUS mandatory 931 DESCRIPTION 932 "The memory module's serial number. 933 934 This field will be a null (size 0) string if the serial number 935 is not available." 936 ::= { cpqSiMemModuleEntry 10 } 937 938 cpqSiMemModuleECCStatus OBJECT-TYPE 939 SYNTAX INTEGER { 940 other(1), 941 ok(2), 942 degraded(3), 943 degradedModuleIndexUnknown(4) 944 } 945 ACCESS read-only 946 STATUS mandatory 947 DESCRIPTION 948 "This provides the current status of the correctable memory 949 errors for this memory module. 950 951 The following status values are supported: 952 953 other(1): 954 ECC is not supported on this memory module. 955 956 ok(2): 957 The correctable error count is below threshold. 958 959 degraded(3): 960 The correctable error count has exceeded threshold. 961 962 degradedModuleIndexUnknown(4): 963 The correctable error count has exceeded threshold. 964 The module index not available." 965 ::= { cpqSiMemModuleEntry 11 } 966 967 cpqSiMemModuleHwLocation OBJECT-TYPE 968 SYNTAX DisplayString (SIZE (0..255)) 969 ACCESS read-only 970 STATUS optional 971 DESCRIPTION 972 "A text description of the hardware location, on complex 973 multi SBB hardware only, for the memory module. 974 A NULL string indicates that the hardware location could not 975 be determined or is irrelevant." 976 ::= { cpqSiMemModuleEntry 12 } 977 978 979 cpqSiMemModuleFrequency OBJECT-TYPE 980 SYNTAX INTEGER (0..65535) 981 ACCESS read-only 982 STATUS mandatory 983 DESCRIPTION 984 "The memory module frequency in MHz. The value zero (0) will 985 be given if the module frequency cannot be determined." 986 ::= { cpqSiMemModuleEntry 13 } 987 988 cpqSiMemModuleCellTablePtr OBJECT-TYPE 989 SYNTAX INTEGER (0..15) 990 ACCESS read-only 991 STATUS optional 992 DESCRIPTION 993 "Index for the cell in cpqSeCellTable where the memory board is 994 installed." 995 ::= { cpqSiMemModuleEntry 14 } 996 997 cpqSiMemModuleCellStatus OBJECT-TYPE 998 SYNTAX INTEGER { 999 other(1), 1000 ok(2), 1001 deconfigured(3) 1002 } 1003 ACCESS read-only 1004 STATUS optional 1005 DESCRIPTION 1006 "This provides the current status for this memory module. 1007 1008 The following status values are supported: 1009 1010 other(1): 1011 The memory module status is not available 1012 1013 ok(2): 1014 The memory module is active 1015 1016 deconfigured(3): 1017 The memory module is not ready" 1018 ::= { cpqSiMemModuleEntry 15 } 1019 1020 1021 cpqSiMemModulePartNoMfgr OBJECT-TYPE 1022 SYNTAX DisplayString (SIZE (0..255)) 1023 ACCESS read-only 1024 STATUS optional 1025 DESCRIPTION 1026 "The memory module's manufacturer's part number. 1027 1028 This field will be a null (size 0) string if the manufacturer 1029 part number is not available." 1030 ::= { cpqSiMemModuleEntry 16 } 1031 1032 cpqSiMemModuleSerialNoMfgr OBJECT-TYPE 1033 SYNTAX DisplayString (SIZE (0..255)) 1034 ACCESS read-only 1035 STATUS optional 1036 DESCRIPTION 1037 "The memory module's manufacturer's serial number. 1038 1039 This field will be a null (size 0) string if the manufacturer 1040 serial number is not available." 1041 ::= { cpqSiMemModuleEntry 17 } 1042 1043-- **************************************************************************** 1044-- System Information System Board Group 1045-- ===================================== 1046-- 1047-- The compaq enterprise (1.3.6.1.4.1.232) 1048-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 1049-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 1050-- cpqSiSystemBoard Group (1.3.6.1.4.1.232.2.2.4) 1051-- 1052-- 1053-- **************************************************************************** 1054 1055 cpqSiSystemId OBJECT-TYPE 1056 SYNTAX INTEGER (0..65535) 1057 ACCESS read-only 1058 STATUS mandatory 1059 DESCRIPTION 1060 "The System ID. 1061 1062 This value indicates the system ID of the system board 1063 in this system. This ID replaces the product ID used in 1064 older machines (cpqSiProductId). A value of 7Eh for the 1065 cpqSiProductId indicates that the cpqSiSystemId should be 1066 used to identify the system. A value of zero (0) 1067 indicates that the system ID function is not supported on this 1068 machine. In this case, the cpqSiProductId should be used to 1069 identify the system." 1070 ::= { cpqSiSystemBoard 6 } 1071 1072 cpqSiSystemCpuId OBJECT-TYPE 1073 SYNTAX INTEGER (0..65535) 1074 ACCESS read-only 1075 STATUS mandatory 1076 DESCRIPTION 1077 "The System ID : CPU Component. 1078 1079 This value indicates the CPU type of the system board 1080 in this system. A value of zero (0) indicates that the CPU 1081 type cannot be determined." 1082 ::= { cpqSiSystemBoard 7 } 1083 1084 cpqSiFlashRomSupport OBJECT-TYPE 1085 SYNTAX INTEGER { 1086 other(1), 1087 notSupported(2), 1088 supported(3) 1089 } 1090 ACCESS read-only 1091 STATUS mandatory 1092 DESCRIPTION 1093 "This value indicates if this system supports flash upgradable 1094 system ROM." 1095 ::= { cpqSiSystemBoard 8 } 1096 1097 cpqSiQuickTestRomDate OBJECT-TYPE 1098 SYNTAX OCTET STRING (SIZE (7)) 1099 ACCESS read-only 1100 STATUS mandatory 1101 DESCRIPTION 1102 "This value indicates the date of the current quick test ROM 1103 image. 1104 1105 field octets contents range 1106 ===== ====== ======= ===== 1107 1 1-2 year 0..65536 1108 2 3 month 1..12 1109 3 4 day 1..31 1110 4 5 hour 0..23 1111 5 6 minute 0..59 1112 6 7 second 0..60 1113 (use 60 for leap-second) 1114 1115 1116 This field will be set to year = 0 if quick test ROM is not 1117 present. The hour, minute, and second field will be set 1118 to zero (0) if they are not relevant. The year field is set 1119 with the most significant octet first." 1120 ::= { cpqSiSystemBoard 9 } 1121 1122 cpqSiReboot OBJECT-TYPE 1123 SYNTAX INTEGER { 1124 notAvailable(1), 1125 available(2), 1126 defaultOnlyAvailable(3), 1127 rebootToCpqUtils(2693), 1128 rebootToDefault(8115), 1129 autoShutdown(9037) 1130 } 1131 ACCESS read-write 1132 STATUS deprecated 1133 DESCRIPTION 1134 "This object may contain the following values: 1135 notAvailable(1) 1136 the system does not support the reboot functionality. 1137 Setting this object to notAvailable(1) has no effect. 1138 1139 available(2) 1140 the system supports the both reboot to functionalities. 1141 Setting this object to available(2) has no effect. 1142 1143 defaultOnlyAvailable(3) 1144 the system supports the only the default reboot functionality. 1145 Setting this object to available(3) has no effect. 1146 1147 rebootToCpqUtils(2693) 1148 the system will reboot to the System Utilities if 1149 the reboot functionality is available. If possible, 1150 the agent will attempt to gracefully shutdown the 1151 operating system before performing the reboot. 1152 If this functionality is unavailable on this system 1153 then all sets will have no effect. 1154 1155 rebootToDefault(8115) 1156 the system will reboot and allow the default boot 1157 process to occur if the reboot functionality is 1158 available. If possible, the agent will attempt to 1159 gracefully shutdown the operating system before 1160 performing the reboot. If this functionality is 1161 unavailable on this system then all sets will have 1162 no effect. 1163 1164 autoShutdown(9037) 1165 If possible, the agent will attempt to gracefully 1166 shutdown the operating system. The agent will not 1167 preform a reboot. 1168 1169 " 1170 1171 ::= { cpqSiSystemBoard 10 } 1172 1173 1174-- **************************************************************************** 1175-- System Information Processor Microcode Patch Table 1176-- ================================================== 1177-- 1178-- The compaq enterprise (1.3.6.1.4.1.232) 1179-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 1180-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 1181-- cpqSiSystemBoard Group (1.3.6.1.4.1.232.2.2.4) 1182-- cpqSiProcMicroPatchTable (1.3.6.1.4.1.232.2.2.4.11) 1183-- cpqSiProcMicroPatchEntry (1.3.6.1.4.1.232.2.2.4.11.1) 1184-- 1185-- **************************************************************************** 1186 1187 cpqSiProcMicroPatchTable OBJECT-TYPE 1188 SYNTAX SEQUENCE OF CpqSiProcMicroPatchEntry 1189 ACCESS not-accessible 1190 STATUS mandatory 1191 DESCRIPTION 1192 "This table lists the set of processor microcode patches that 1193 the system ROM contains. During post, the ROM will apply the 1194 appropriate patches to the CPU microcode. Scan this table to 1195 ensure that a patch is being applied to a processor." 1196 ::= { cpqSiSystemBoard 11 } 1197 1198 cpqSiProcMicroPatchEntry OBJECT-TYPE 1199 SYNTAX CpqSiProcMicroPatchEntry 1200 ACCESS not-accessible 1201 STATUS mandatory 1202 DESCRIPTION 1203 "An entry describing one microcode patch contained in the system 1204 ROM." 1205 INDEX { cpqSiProcMicroPatchIndex } 1206 ::= { cpqSiProcMicroPatchTable 1 } 1207 1208 CpqSiProcMicroPatchEntry ::= SEQUENCE { 1209 cpqSiProcMicroPatchIndex INTEGER, 1210 cpqSiProcMicroPatchId INTEGER, 1211 cpqSiProcMicroPatchDate OCTET STRING, 1212 cpqSiProcMicroPatchFamily OCTET STRING } 1213 1214 cpqSiProcMicroPatchIndex OBJECT-TYPE 1215 SYNTAX INTEGER (1..255) 1216 ACCESS read-only 1217 STATUS mandatory 1218 DESCRIPTION 1219 "Index into the microcode patch table." 1220 ::= { cpqSiProcMicroPatchEntry 1 } 1221 1222 cpqSiProcMicroPatchId OBJECT-TYPE 1223 SYNTAX INTEGER 1224 ACCESS read-only 1225 STATUS mandatory 1226 DESCRIPTION 1227 "The ID of this particular CPU microcode patch." 1228 ::= { cpqSiProcMicroPatchEntry 2 } 1229 1230 cpqSiProcMicroPatchDate OBJECT-TYPE 1231 SYNTAX OCTET STRING (SIZE (7)) 1232 ACCESS read-only 1233 STATUS mandatory 1234 DESCRIPTION 1235 "This value indicates the date of this CPU microcode patch. 1236 1237 field octets contents range 1238 ===== ====== ======= ===== 1239 1 1-2 year 0..65536 1240 2 3 month 1..12 1241 3 4 day 1..31 1242 4 5 hour 0..23 1243 5 6 minute 0..59 1244 6 7 second 0..60 1245 (use 60 for leap-second) 1246 1247 NOTE: Year is stored in packed BCD. The most significant 1248 part is in the second octet. For example: 1249 1995 would be stored as 0x95 0x19. 1250 1251 The hour, minute, and second field will be set to zero (0) 1252 if they are not relevant. The year field is set with the 1253 most significant octet first." 1254 ::= { cpqSiProcMicroPatchEntry 3 } 1255 1256 cpqSiProcMicroPatchFamily OBJECT-TYPE 1257 SYNTAX OCTET STRING (SIZE (3)) 1258 ACCESS read-only 1259 STATUS mandatory 1260 DESCRIPTION 1261 "The valid family/model/step of the processor that this CPU 1262 microcode patch applies to. 1263 1264 field octets contents range 1265 ===== ====== ======= ===== 1266 1 1 CPU Step 0..255 1267 2 2 CPU Model 0..255 1268 3 3 CPU Family 0..255 " 1269 ::= { cpqSiProcMicroPatchEntry 4 } 1270 1271 1272-- **************************************************************************** 1273-- System Information System Board Group 1274-- ===================================== 1275-- 1276-- The compaq enterprise (1.3.6.1.4.1.232) 1277-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 1278-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 1279-- cpqSiSystemBoard Group (1.3.6.1.4.1.232.2.2.4) 1280-- 1281-- 1282-- **************************************************************************** 1283 1284 cpqSiPowerMgmtStatus OBJECT-TYPE 1285 SYNTAX INTEGER { 1286 other(1), 1287 disabled(2), 1288 enabled(3) 1289 } 1290 ACCESS read-only 1291 STATUS mandatory 1292 DESCRIPTION 1293 "The state of power management." 1294 ::= { cpqSiSystemBoard 12 } 1295 1296 1297 cpqSiRebootFlags OBJECT-TYPE 1298 SYNTAX INTEGER 1299 ACCESS read-write 1300 STATUS mandatory 1301 DESCRIPTION 1302 "The Reboot Flags. 1303 1304 This is a collection of flags used to indicate the re-boot 1305 options available. This integer is a bitmap, with each bit 1306 indicating the availability of an option. If the bit is set 1307 to 1, the option is available; otherwise it is not. Multiple 1308 options are allowed. 1309 1310 NOTE: bit 31 is the most significant bit, bit 0 is the least 1311 significant. 1312 1313 1314 Status This is a collection of flags. Each bit has the 1315 following meaning when it is on (1): 1316 1317 Bit 31: Execute Set 1318 Bit 30-6: RESERVED 1319 Bit 5: Boot to ROM Based Setup 1320 Bit 4: RESERVED 1321 Bit 3: Boot to OS 1322 Bit 2: Boot to Utils 1323 Bit 1: Warm Boot 1324 Bit 0: Cold Boot" 1325 1326 1327 1328 ::= { cpqSiSystemBoard 13 } 1329 1330 cpqSiMemErrorIndex OBJECT-TYPE 1331 SYNTAX INTEGER (0..65535) 1332 ACCESS read-only 1333 STATUS mandatory 1334 DESCRIPTION 1335 "Placeholder for memory module number for ECC traps. 1336 Represents the number of the memory module for which an ECC status 1337 change has occurred. Set to 65535 if module number not available." 1338 ::= { cpqSiSystemBoard 14 } 1339 1340 cpqSiMemECCCondition OBJECT-TYPE 1341 SYNTAX INTEGER { 1342 other(1), 1343 ok(2), 1344 degraded(3) 1345 } 1346 ACCESS read-only 1347 STATUS mandatory 1348 DESCRIPTION 1349 "This provides the current condition of the correctable memory 1350 errors for the entire memory. 1351 1352 The following status values are supported: 1353 1354 other(1) : 1355 ECC is not supported. 1356 1357 ok(2) : 1358 The correctable error count is below threshold. 1359 1360 degraded(3) : 1361 The correctable error count has exceeded threshold." 1362 1363 ::= { cpqSiSystemBoard 15 } 1364 1365 cpqSiMemConfigChangeData OBJECT-TYPE 1366 SYNTAX DisplayString (SIZE (0..383)) 1367 ACCESS read-only 1368 STATUS mandatory 1369 DESCRIPTION 1370 "Text string for the memory configuration change trap." 1371 ::= { cpqSiSystemBoard 16 } 1372 1373 cpqSiServerSystemId OBJECT-TYPE 1374 SYNTAX DisplayString (SIZE (0..8)) 1375 ACCESS read-only 1376 STATUS mandatory 1377 DESCRIPTION 1378 "A Server System ID. 1379 1380 This value is used to uniquely identify systems via a unique 1381 ID on systems that do not support the EISA bus." 1382 ::= { cpqSiSystemBoard 17 } 1383 1384 cpqSiPowerScheme OBJECT-TYPE 1385 SYNTAX INTEGER { 1386 unsupported(1), 1387 other(2), 1388 power-saver(3), 1389 balanced(4), 1390 high-performance(5), 1391 user-defined(6) 1392 } 1393 ACCESS read-only 1394 STATUS optional 1395 DESCRIPTION 1396 "The current active power plan or power scheme of the system." 1397 ::= { cpqSiSystemBoard 18 } 1398 1399 cpqSiPowerSchemeName OBJECT-TYPE 1400 SYNTAX DisplayString (SIZE (0..255)) 1401 ACCESS read-only 1402 STATUS optional 1403 DESCRIPTION 1404 "The name of current active power plan or power scheme of the 1405 system. When cpqSiPowerScheme has a value of user-defined(6), the 1406 user defined name can be populated here." 1407 ::= { cpqSiSystemBoard 19 } 1408 1409 cpqSiCurrentPerformanceStatePointer OBJECT-TYPE 1410 SYNTAX INTEGER (0..65535) 1411 ACCESS read-only 1412 STATUS optional 1413 DESCRIPTION 1414 "Pointer to cpqSiPerfStateIndex in cpqSiPerfStateTable to indicate the current performance state of the system." 1415 ::= { cpqSiSystemBoard 20 } 1416 1417 cpqSiMinPerformanceState OBJECT-TYPE 1418 SYNTAX INTEGER (0..65535) 1419 ACCESS read-only 1420 STATUS optional 1421 DESCRIPTION 1422 "The slowest performance state by the selected power state policy." 1423 ::= { cpqSiSystemBoard 21 } 1424 1425 cpqSiMaxPerformanceState OBJECT-TYPE 1426 SYNTAX INTEGER (0..65535) 1427 ACCESS read-only 1428 STATUS optional 1429 DESCRIPTION 1430 "The fastest performance state supported by the selected power state policy." 1431 ::= { cpqSiSystemBoard 22 } 1432 1433-- **************************************************************************** 1434-- Performance State Table 1435-- ================================ 1436-- 1437-- The compaq enterprise (1.3.6.1.4.1.232) 1438-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 1439-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 1440-- cpqSiSystemBoard Group (1.3.6.1.4.1.232.2.2.4) 1441-- cpqSiPerfStateTable (1.3.6.1.4.1.232.2.2.4.23) 1442-- cpqSiPerfStateEntry (1.3.6.1.4.1.232.2.2.4.23.1) 1443-- 1444-- **************************************************************************** 1445 1446 cpqSiPerfStateTable OBJECT-TYPE 1447 SYNTAX SEQUENCE OF CpqSiPerfStateEntry 1448 ACCESS not-accessible 1449 STATUS optional 1450 DESCRIPTION 1451 "A table of supported performance states of the system." 1452 ::= { cpqSiSystemBoard 23 } 1453 1454 cpqSiPerfStateEntry OBJECT-TYPE 1455 SYNTAX CpqSiPerfStateEntry 1456 ACCESS not-accessible 1457 STATUS optional 1458 DESCRIPTION 1459 "An entry describing a supported performance state of the system." 1460 INDEX { cpqSiPerfStateIndex } 1461 ::= { cpqSiPerfStateTable 1 } 1462 1463 CpqSiPerfStateEntry ::= SEQUENCE { 1464 cpqSiPerfStateIndex INTEGER, 1465 cpqSiPerfState INTEGER, 1466 cpqSiPerfStateCpuFrequency INTEGER, 1467 cpqSiPerfStateCpuPower INTEGER 1468 } 1469 1470 cpqSiPerfStateIndex OBJECT-TYPE 1471 SYNTAX INTEGER (0..65535) 1472 ACCESS read-only 1473 STATUS optional 1474 DESCRIPTION 1475 "Index into the performance state table. cpqSiCurrentPerformanceStatePointer should point to one of these values." 1476 ::= { cpqSiPerfStateEntry 1 } 1477 1478 cpqSiPerfState OBJECT-TYPE 1479 SYNTAX INTEGER (0.. 65535) 1480 ACCESS read-only 1481 STATUS optional 1482 DESCRIPTION 1483 "Performance state number. A unique number assigned to a performance state instance." 1484 ::= { cpqSiPerfStateEntry 2 } 1485 1486 cpqSiPerfStateCpuFrequency OBJECT-TYPE 1487 SYNTAX INTEGER (0..2147483647) 1488 ACCESS read-only 1489 STATUS optional 1490 DESCRIPTION 1491 "The processor frequency in megahertz for this performance state instance." 1492 ::= { cpqSiPerfStateEntry 3 } 1493 1494 cpqSiPerfStateCpuPower OBJECT-TYPE 1495 SYNTAX INTEGER (0..2147483647) 1496 ACCESS read-only 1497 STATUS optional 1498 DESCRIPTION 1499 "The processor power setting in milliwatts for this performance state instance." 1500 ::= { cpqSiPerfStateEntry 4 } 1501 1502 cpqSiTPMmodule OBJECT-TYPE 1503 SYNTAX INTEGER { 1504 other(1), 1505 absent(2), 1506 presentEnabled (3), 1507 presentDisabled (4) 1508 } 1509 ACCESS read-only 1510 STATUS optional 1511 DESCRIPTION 1512 "This field will be populated if TPM module is present in the system board. 1513 other(1) 1514 No record of TPM exist. 1515 absent(2) 1516 TPM module is not present in the system. 1517 presentEnabled(3) 1518 TPM module is present in the system and currently enabled. 1519 presentDisabled(4) 1520 TPM module is present in the system and currently not enabled." 1521 ::= { cpqSiSystemBoard 24 } 1522 1523 cpqSiTrustedModuleType OBJECT-TYPE 1524 SYNTAX INTEGER (0..255) 1525 ACCESS read-only 1526 STATUS optional 1527 DESCRIPTION 1528 "Bits[3:0] = Trusted Module Type: 1529 1h = Not Specified 1530 2h = TPM 1.2 1531 3h = TPM 2.0 1532 4h = TM 1.0 1533 5h - 0Fh = Reserved." 1534 1535 ::= { cpqSiSystemBoard 25 } 1536 1537-- **************************************************************************** 1538-- System Information Board Revision Group 1539-- ======================================= 1540-- 1541-- The compaq enterprise (1.3.6.1.4.1.232) 1542-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 1543-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 1544-- cpqSiBoardRev Group (1.3.6.1.4.1.232.2.2.5) 1545-- 1546-- The cpqSiBoardRev group describes the board revision information. 1547-- 1548-- Implementation of the cpqSiBoardRev group is mandatory for all 1549-- agents that support the System Information MIB in a system that 1550-- supports the board revision feature. 1551-- 1552-- **************************************************************************** 1553 1554 cpqSiCurRevDate OBJECT-TYPE 1555 SYNTAX DisplayString (SIZE (8)) 1556 ACCESS read-only 1557 STATUS mandatory 1558 DESCRIPTION 1559 "The current board revision configuration date in MM/DD/YY 1560 format. This is the date that the EISA Configuration Utility 1561 was used to define the current configuration. This value will 1562 contain 'N/A' if this system does not support this feature." 1563 ::= { cpqSiBoardRev 1 } 1564 1565 cpqSiPrevRevDate OBJECT-TYPE 1566 SYNTAX DisplayString (SIZE (8)) 1567 ACCESS read-only 1568 STATUS mandatory 1569 DESCRIPTION 1570 "The previous board revision configuration date in MM/DD/YY 1571 format. This is the date that the EISA Configuration Utility 1572 was used to define the previous configuration. This value will 1573 contain 'N/A' if this system does not support this feature." 1574 ::= { cpqSiBoardRev 2 } 1575 1576-- **************************************************************************** 1577-- System Information Board Revision Table 1578-- ======================================== 1579-- 1580-- The compaq enterprise (1.3.6.1.4.1.232) 1581-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 1582-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 1583-- cpqSiBoardRev Group (1.3.6.1.4.1.232.2.2.5) 1584-- cpqSiBoardRevTable (1.3.6.1.4.1.232.2.2.5.3) 1585-- 1586-- **************************************************************************** 1587 1588 cpqSiBoardRevTable OBJECT-TYPE 1589 SYNTAX SEQUENCE OF CpqSiBoardRevEntry 1590 ACCESS not-accessible 1591 STATUS mandatory 1592 DESCRIPTION 1593 "A table of board revision descriptions." 1594 ::= { cpqSiBoardRev 3 } 1595 1596 cpqSiBoardRevEntry OBJECT-TYPE 1597 SYNTAX CpqSiBoardRevEntry 1598 ACCESS not-accessible 1599 STATUS mandatory 1600 DESCRIPTION 1601 "A board revision description." 1602 INDEX { cpqSiBoardRevSlotIndex, cpqSiBoardRevIndex } 1603 ::= { cpqSiBoardRevTable 1 } 1604 1605 CpqSiBoardRevEntry ::= SEQUENCE { 1606 cpqSiBoardRevSlotIndex INTEGER, 1607 cpqSiBoardRevIndex INTEGER, 1608 cpqSiBoardRevId DisplayString, 1609 cpqSiBoardRevCur DisplayString, 1610 cpqSiBoardRevPrev DisplayString, 1611 cpqSiBoardRevHwLocation DisplayString 1612 } 1613 1614 cpqSiBoardRevSlotIndex OBJECT-TYPE 1615 SYNTAX INTEGER (0..255) 1616 ACCESS read-only 1617 STATUS mandatory 1618 DESCRIPTION 1619 "The slot in which the board described in this entry resides. 1620 Zero (0) indicates the system board." 1621 ::= { cpqSiBoardRevEntry 1 } 1622 1623 cpqSiBoardRevIndex OBJECT-TYPE 1624 SYNTAX INTEGER (0..65535) 1625 ACCESS read-only 1626 STATUS mandatory 1627 DESCRIPTION 1628 "A number that uniquely specifies which board in a specific slot 1629 is described in this entry. Zero (0) indicates the main board 1630 in this slot. Any other number indicates a daughter board or a 1631 component of the main board." 1632 ::= { cpqSiBoardRevEntry 2 } 1633 1634 cpqSiBoardRevId OBJECT-TYPE 1635 SYNTAX DisplayString (SIZE (0..16)) 1636 ACCESS read-only 1637 STATUS mandatory 1638 DESCRIPTION 1639 "A description of the board type. The defined types are: 1640 1641 Type 1642 ============== 1643 System Board 1644 Processor n (n = the processor number) 1645 Memory n (n = the memory board number) 1646 Slot n (n = the slot the board occupies) 1647 1648 Other types may be defined at a later date." 1649 ::= { cpqSiBoardRevEntry 3 } 1650 1651 cpqSiBoardRevCur OBJECT-TYPE 1652 SYNTAX DisplayString (SIZE (0..8)) 1653 ACCESS read-only 1654 STATUS mandatory 1655 DESCRIPTION 1656 "The current revision for the board described in this entry. 1657 This value will be N/A if there is no current revision 1658 information." 1659 ::= { cpqSiBoardRevEntry 4 } 1660 1661 cpqSiBoardRevPrev OBJECT-TYPE 1662 SYNTAX DisplayString (SIZE (0..8)) 1663 ACCESS read-only 1664 STATUS mandatory 1665 DESCRIPTION 1666 "The revision for the board described in this entry prior to the 1667 current configuration. This value will be N/A if there is no 1668 previous revision information." 1669 ::= { cpqSiBoardRevEntry 5 } 1670 1671 cpqSiBoardRevHwLocation OBJECT-TYPE 1672 SYNTAX DisplayString (SIZE (0..255)) 1673 ACCESS read-only 1674 STATUS optional 1675 DESCRIPTION 1676 "A text description of the hardware location, on complex 1677 multi SBB hardware only, for the board. 1678 A NULL string indicates that the hardware location could not 1679 be determined or is irrelevant." 1680 ::= { cpqSiBoardRevEntry 6 } 1681 1682-- **************************************************************************** 1683-- System Information Firmware Revision Table 1684-- ========================================== 1685-- 1686-- The compaq enterprise (1.3.6.1.4.1.232) 1687-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 1688-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 1689-- cpqSiBoardRev Group (1.3.6.1.4.1.232.2.2.5) 1690-- cpqSiFirmwareRevTable (1.3.6.1.4.1.232.2.2.5.4) 1691-- 1692-- **************************************************************************** 1693 1694 cpqSiFirmwareRevTable OBJECT-TYPE 1695 SYNTAX SEQUENCE OF CpqSiFirmwareRevEntry 1696 ACCESS not-accessible 1697 STATUS mandatory 1698 DESCRIPTION 1699 "A table of firmware revision descriptions." 1700 ::= { cpqSiBoardRev 4 } 1701 1702 cpqSiFirmwareRevEntry OBJECT-TYPE 1703 SYNTAX CpqSiFirmwareRevEntry 1704 ACCESS not-accessible 1705 STATUS mandatory 1706 DESCRIPTION 1707 "A firmware revision description." 1708 INDEX { cpqSiFirmwareRevIndex } 1709 ::= { cpqSiFirmwareRevTable 1 } 1710 1711 CpqSiFirmwareRevEntry ::= SEQUENCE { 1712 cpqSiFirmwareRevIndex INTEGER, 1713 cpqSiFirmwareRevDesc DisplayString, 1714 cpqSiFirmwareRevString DisplayString, 1715 cpqSiFirmwareRevCellTablePtr INTEGER, 1716 cpqSiFirmwareLocation DisplayString, 1717 cpqSiFirmwareStatus INTEGER 1718 } 1719 1720 cpqSiFirmwareRevIndex OBJECT-TYPE 1721 SYNTAX INTEGER 1722 ACCESS read-only 1723 STATUS mandatory 1724 DESCRIPTION 1725 "Locally-unique index for this entry." 1726 ::= { cpqSiFirmwareRevEntry 1 } 1727 1728 cpqSiFirmwareRevDesc OBJECT-TYPE 1729 SYNTAX DisplayString 1730 ACCESS read-only 1731 STATUS mandatory 1732 DESCRIPTION 1733 "Description, e.g. SRM console, ARC console, System BIOS, etc." 1734 ::= { cpqSiFirmwareRevEntry 2 } 1735 1736 cpqSiFirmwareRevString OBJECT-TYPE 1737 SYNTAX DisplayString 1738 ACCESS read-only 1739 STATUS mandatory 1740 DESCRIPTION 1741 "Version number, possibly of the form Vx.y or Vx.y-z." 1742 ::= { cpqSiFirmwareRevEntry 3 } 1743 1744 cpqSiFirmwareRevCellTablePtr OBJECT-TYPE 1745 SYNTAX INTEGER 1746 ACCESS read-only 1747 STATUS deprecated 1748 DESCRIPTION 1749 "Index for the cell in cpqSeCellTable where this firmware is located" 1750 ::= { cpqSiFirmwareRevEntry 4 } 1751 1752 cpqSiFirmwareLocation OBJECT-TYPE 1753 SYNTAX DisplayString (SIZE (0..255)) 1754 ACCESS read-only 1755 STATUS optional 1756 DESCRIPTION 1757 "Description of which board the firmware is located in." 1758 ::= { cpqSiFirmwareRevEntry 5 } 1759 1760 cpqSiFirmwareStatus OBJECT-TYPE 1761 SYNTAX INTEGER { 1762 unknown(1), 1763 active(2), 1764 inactive(3) 1765 } 1766 ACCESS read-only 1767 STATUS optional 1768 DESCRIPTION 1769 "The current status for this firmware." 1770 ::= { cpqSiFirmwareRevEntry 6 } 1771 1772-- **************************************************************************** 1773-- System Information Firmware Configuration Table 1774-- =============================================== 1775-- 1776-- The compaq enterprise (1.3.6.1.4.1.232) 1777-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 1778-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 1779-- cpqSiBoardRev Group (1.3.6.1.4.1.232.2.2.5) 1780-- cpqSiFirmwareCfgTable (1.3.6.1.4.1.232.2.2.5.5) 1781-- 1782-- **************************************************************************** 1783 1784 cpqSiFirmwareCfgTable OBJECT-TYPE 1785 SYNTAX SEQUENCE OF CpqSiFirmwareCfgEntry 1786 ACCESS not-accessible 1787 STATUS mandatory 1788 DESCRIPTION 1789 "Table of soft switches and symbols maintained by the 1790 firmware. May be operating system and/or option-specific 1791 and will certainly be system-specific. This list is 1792 intended to be easily extensible and support arbitrary 1793 datatypes. It includes such switches as powerup options, 1794 default dump device, etc. 1795 Note - the string comparison for svrFwSymbolName is case 1796 insensitive." 1797 ::= { cpqSiBoardRev 5 } 1798 1799 cpqSiFirmwareCfgEntry OBJECT-TYPE 1800 SYNTAX CpqSiFirmwareCfgEntry 1801 ACCESS not-accessible 1802 STATUS mandatory 1803 DESCRIPTION 1804 "Each entry represents one variable or symbol maintained by 1805 or stored by some instance of firmware in the system." 1806 INDEX { cpqSiFirmwareCfgName } 1807 ::= { cpqSiFirmwareCfgTable 1 } 1808 1809 CpqSiFirmwareCfgEntry ::= SEQUENCE { 1810 cpqSiFirmwareCfgName DisplayString, 1811 cpqSiFirmwareCfgValue DisplayString 1812 } 1813 1814 cpqSiFirmwareCfgName OBJECT-TYPE 1815 SYNTAX DisplayString 1816 ACCESS read-only 1817 STATUS mandatory 1818 DESCRIPTION 1819 "The firmware configuration symbol name as visible from the 1820 console." 1821 ::= { cpqSiFirmwareCfgEntry 1 } 1822 1823 cpqSiFirmwareCfgValue OBJECT-TYPE 1824 SYNTAX DisplayString 1825 ACCESS read-only 1826 STATUS mandatory 1827 DESCRIPTION 1828 "The firmware configuration symbol value. Null if none 1829 or unknown." 1830 ::= { cpqSiFirmwareCfgEntry 2 } 1831 1832 1833-- **************************************************************************** 1834-- System Information Ups Shutdown Group 1835-- ===================================== 1836-- 1837-- The compaq enterprise (1.3.6.1.4.1.232) 1838-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 1839-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 1840-- cpqSiRackServer Group (1.3.6.1.4.1.232.2.2.6) 1841-- 1842-- The cpqSiRackServer group describes this system's role in a rack 1843-- family. 1844-- 1845-- Implementation of the cpqSiRackServer group is mandatory for all 1846-- agents that support the System Information MIB in a system that 1847-- supports Rack Server features. 1848-- 1849-- **************************************************************************** 1850 1851 cpqSiRackServerShutdownRole OBJECT-TYPE 1852 SYNTAX INTEGER { 1853 other(1), 1854 master(2), 1855 slave(3) 1856 } 1857 ACCESS read-write 1858 STATUS mandatory 1859 DESCRIPTION 1860 "This entry describes this system's role in a rack-mounted 1861 uninterruptible power supply family. The master both 1862 communicates with the UPS and derives its power from the 1863 UPS. The slave derives its power from the UPS, but does 1864 not communicate with it." 1865 ::= { cpqSiRackServer 1 } 1866 1867 cpqSiRackServerMasterName OBJECT-TYPE 1868 SYNTAX DisplayString (SIZE (0..48)) 1869 ACCESS read-write 1870 STATUS mandatory 1871 DESCRIPTION 1872 "This entry describes the name of the master server in a 1873 rack-mounted uninterruptible power supply family. A slave 1874 system would communicate with this server to derive UPS 1875 status." 1876 ::= { cpqSiRackServer 2 } 1877 1878 1879-- **************************************************************************** 1880-- System Information Video Group 1881-- ============================== 1882-- 1883-- The compaq enterprise (1.3.6.1.4.1.232) 1884-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 1885-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 1886-- cpqSiVideo Group (1.3.6.1.4.1.232.2.2.7) 1887-- 1888-- The Video group describes the manageable video displays that are 1889-- attached to the system. 1890-- 1891-- Implementation of the video group is mandatory for all agents that 1892-- support the System Information MIB when a manageable video display 1893-- is in the system. 1894-- 1895-- **************************************************************************** 1896 1897 cpqSiVideoEdidRaw OBJECT-TYPE 1898 SYNTAX OCTET STRING (SIZE (128)) 1899 ACCESS read-only 1900 STATUS deprecated 1901 DESCRIPTION 1902 "The raw value returned from the video EDID function." 1903 ::= { cpqSiVideo 1 } 1904 1905 cpqSiVideoDesc OBJECT-TYPE 1906 SYNTAX DisplayString (SIZE (0..255)) 1907 ACCESS read-only 1908 STATUS deprecated 1909 DESCRIPTION 1910 "The manufacturer and model description of the video display." 1911 ::= { cpqSiVideo 2 } 1912 1913 cpqSiVideoSerialNumber OBJECT-TYPE 1914 SYNTAX DisplayString (SIZE (0..32)) 1915 ACCESS read-only 1916 STATUS deprecated 1917 DESCRIPTION 1918 "The serial number of the video display." 1919 ::= { cpqSiVideo 3 } 1920 1921 cpqSiVideoManufactureDate OBJECT-TYPE 1922 SYNTAX OCTET STRING (SIZE (7)) 1923 ACCESS read-only 1924 STATUS deprecated 1925 DESCRIPTION 1926 "The date of manufacture of the video display in the following 1927 format: 1928 1929 field octets contents range 1930 ===== ====== ======= ===== 1931 1 1-2 year 0..65536 1932 2 3 month 1..12 1933 3 4 day 1..31 1934 4 5 hour 0..23 1935 5 6 minute 0..59 1936 6 7 second 0..60 1937 (use 60 for leap-second) 1938 1939 This field will be set to year = 0 if the agent cannot provide 1940 the date. The date information that is given resolves to a year 1941 and week, so the hour, minute, and second field will be set to 0, 1942 the month and day fields will give the monday of the week of 1943 manufacture." 1944 ::= { cpqSiVideo 4 } 1945 1946 cpqSiVideoHeight OBJECT-TYPE 1947 SYNTAX INTEGER (0..255) 1948 ACCESS read-only 1949 STATUS deprecated 1950 DESCRIPTION 1951 "The maximum image height of the video display in centimeters" 1952 ::= { cpqSiVideo 5 } 1953 1954 cpqSiVideoWidth OBJECT-TYPE 1955 SYNTAX INTEGER (0..255) 1956 ACCESS read-only 1957 STATUS deprecated 1958 DESCRIPTION 1959 "The maximum image width of the video display in centimeters" 1960 ::= { cpqSiVideo 6 } 1961 1962 1963 cpqSiVideoMaxHorPixel OBJECT-TYPE 1964 SYNTAX INTEGER (0..65535) 1965 ACCESS read-only 1966 STATUS deprecated 1967 DESCRIPTION 1968 "The number of horizontal pixels in the highest resolution video 1969 mode supported." 1970 ::= { cpqSiVideo 7 } 1971 1972 1973 cpqSiVideoMaxVertPixel OBJECT-TYPE 1974 SYNTAX INTEGER (0..65535) 1975 ACCESS read-only 1976 STATUS deprecated 1977 DESCRIPTION 1978 "The number of vertical pixels in the highest resolution video 1979 mode supported." 1980 ::= { cpqSiVideo 8 } 1981 1982 1983 cpqSiVideoMaxRefreshRate OBJECT-TYPE 1984 SYNTAX INTEGER (0..65535) 1985 ACCESS read-only 1986 STATUS deprecated 1987 DESCRIPTION 1988 "The video refresh rate in Hz of the highest resolution video 1989 mode supported." 1990 ::= { cpqSiVideo 9 } 1991 1992-- **************************************************************************** 1993-- System Information Monitor Group 1994-- ================================ 1995-- 1996-- The compaq enterprise (1.3.6.1.4.1.232) 1997-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 1998-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 1999-- cpqSiMonitor Group (1.3.6.1.4.1.232.2.2.8) 2000-- 2001-- The Monitor group describes all manageable video displays 2002-- that are attached to the system. 2003-- 2004-- Implementation of the monitor group is mandatory for all agents that 2005-- support the Compaq System Information MIB when a manageable 2006-- video display is in the system. 2007-- 2008-- **************************************************************************** 2009 2010 cpqSiMonitorOverallCondition OBJECT-TYPE 2011 SYNTAX INTEGER { 2012 other(1), 2013 ok(2), 2014 degraded(3), 2015 failed(4) 2016 } 2017 ACCESS read-only 2018 STATUS mandatory 2019 DESCRIPTION 2020 "This value specifies the overall condition of the system's 2021 monitor(s). 2022 2023 The following conditions are supported: 2024 2025 other(1) 2026 The monitor does not support fault reporting or condition is 2027 unknown. 2028 2029 ok(2) 2030 The monitor is operating OK. 2031 2032 degraded(3) 2033 The monitor has detected a fault. The monitor is still useable 2034 but action should be taken to return the monitor to ok. 2035 2036 failed(4) 2037 The monitor has detected a fault. The monitor will not 2038 be useable. Action should be taken to replace the monitor." 2039 ::= { cpqSiMonitor 1 } 2040 2041 2042-- **************************************************************************** 2043-- System Information Monitor Group 2044-- ================================ 2045-- 2046-- The compaq enterprise (1.3.6.1.4.1.232) 2047-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 2048-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 2049-- cpqSiMonitor Group (1.3.6.1.4.1.232.2.2.8) 2050-- cpqSiMonitorTable (1.3.6.1.4.1.232.2.2.8.2) 2051-- cpqSiMonitorEntry (1.3.6.1.4.1.232.2.2.8.2.1) 2052-- 2053-- The Monitor Table describes all manageable video displays 2054-- that are attached to the system. 2055-- 2056-- **************************************************************************** 2057 2058 cpqSiMonitorTable OBJECT-TYPE 2059 SYNTAX SEQUENCE OF CpqSiMonitorEntry 2060 ACCESS not-accessible 2061 STATUS mandatory 2062 DESCRIPTION 2063 "A table of all video monitor descriptions connected to this 2064 system." 2065 ::= { cpqSiMonitor 2 } 2066 2067 cpqSiMonitorEntry OBJECT-TYPE 2068 SYNTAX CpqSiMonitorEntry 2069 ACCESS not-accessible 2070 STATUS mandatory 2071 DESCRIPTION 2072 "A video monitor description." 2073 INDEX { cpqSiMonitorIndex } 2074 ::= { cpqSiMonitorTable 1 } 2075 2076 CpqSiMonitorEntry ::= SEQUENCE { 2077 cpqSiMonitorIndex INTEGER, 2078 cpqSiMonitorEdidRaw OCTET STRING, 2079 cpqSiMonitorDesc DisplayString, 2080 cpqSiMonitorSerialNumber DisplayString, 2081 cpqSiMonitorManufactureDate OCTET STRING, 2082 cpqSiMonitorHeight INTEGER, 2083 cpqSiMonitorWidth INTEGER, 2084 cpqSiMonitorMaxHorPixel INTEGER, 2085 cpqSiMonitorMaxVertPixel INTEGER, 2086 cpqSiMonitorMaxRefreshRate INTEGER, 2087 cpqSiMonitorManufacturer DisplayString, 2088 cpqSiMonitorThermalCondition INTEGER, 2089 cpqSiMonitorOperationalCondition INTEGER, 2090 cpqSiMonitorStatus INTEGER 2091 } 2092 2093 cpqSiMonitorIndex OBJECT-TYPE 2094 SYNTAX INTEGER (0..15) 2095 ACCESS read-only 2096 STATUS mandatory 2097 DESCRIPTION 2098 "A unique index for each video display connected to the system." 2099 2100 ::= { cpqSiMonitorEntry 1 } 2101 2102 cpqSiMonitorEdidRaw OBJECT-TYPE 2103 SYNTAX OCTET STRING (SIZE (128)) 2104 ACCESS read-only 2105 STATUS mandatory 2106 DESCRIPTION 2107 "The raw value returned from the video EDID function." 2108 ::= { cpqSiMonitorEntry 2 } 2109 2110 cpqSiMonitorDesc OBJECT-TYPE 2111 SYNTAX DisplayString (SIZE (0..255)) 2112 ACCESS read-only 2113 STATUS mandatory 2114 DESCRIPTION 2115 "The manufacturer and model description of the video display." 2116 ::= { cpqSiMonitorEntry 3 } 2117 2118 cpqSiMonitorSerialNumber OBJECT-TYPE 2119 SYNTAX DisplayString (SIZE (0..32)) 2120 ACCESS read-only 2121 STATUS mandatory 2122 DESCRIPTION 2123 "The serial number of the video display." 2124 ::= { cpqSiMonitorEntry 4 } 2125 2126 cpqSiMonitorManufactureDate OBJECT-TYPE 2127 SYNTAX OCTET STRING (SIZE (7)) 2128 ACCESS read-only 2129 STATUS mandatory 2130 DESCRIPTION 2131 "The date of manufacture of the video display in the following 2132 format: 2133 2134 field octets contents range 2135 ===== ====== ======= ===== 2136 1 1-2 year 0..65536 2137 2 3 month 1..12 2138 3 4 day 1..31 2139 4 5 hour 0..23 2140 5 6 minute 0..59 2141 6 7 second 0..60 2142 (use 60 for leap-second) 2143 2144 This field will be set to year = 0 if the agent cannot provide 2145 the date. The date information that is given resolves to a year 2146 and week, so the hour, minute, and second field will be set to 0, 2147 the month and day fields will give the monday of the week of 2148 manufacture." 2149 ::= { cpqSiMonitorEntry 5 } 2150 2151 cpqSiMonitorHeight OBJECT-TYPE 2152 SYNTAX INTEGER (0..255) 2153 ACCESS read-only 2154 STATUS mandatory 2155 DESCRIPTION 2156 "The maximum image height of the video display in centimeters" 2157 ::= { cpqSiMonitorEntry 6} 2158 2159 cpqSiMonitorWidth OBJECT-TYPE 2160 SYNTAX INTEGER (0..255) 2161 ACCESS read-only 2162 STATUS mandatory 2163 DESCRIPTION 2164 "The maximum image width of the video display in centimeters" 2165 ::= { cpqSiMonitorEntry 7 } 2166 2167 2168 cpqSiMonitorMaxHorPixel OBJECT-TYPE 2169 SYNTAX INTEGER (0..65535) 2170 ACCESS read-only 2171 STATUS mandatory 2172 DESCRIPTION 2173 "The number of horizontal pixels in the highest resolution video 2174 mode supported." 2175 ::= { cpqSiMonitorEntry 8 } 2176 2177 cpqSiMonitorMaxVertPixel OBJECT-TYPE 2178 SYNTAX INTEGER (0..65535) 2179 ACCESS read-only 2180 STATUS mandatory 2181 DESCRIPTION 2182 "The number of vertical pixels in the highest resolution video mode 2183 supported." 2184 ::= { cpqSiMonitorEntry 9 } 2185 2186 cpqSiMonitorMaxRefreshRate OBJECT-TYPE 2187 SYNTAX INTEGER (0..65535) 2188 ACCESS read-only 2189 STATUS mandatory 2190 DESCRIPTION 2191 "The video refresh rate in Hz of the highest resolution video mode 2192 supported." 2193 ::= { cpqSiMonitorEntry 10 } 2194 2195 cpqSiMonitorManufacturer OBJECT-TYPE 2196 SYNTAX DisplayString (SIZE (0..255)) 2197 ACCESS read-only 2198 STATUS mandatory 2199 DESCRIPTION 2200 "The manufacturer of the video display." 2201 ::= { cpqSiMonitorEntry 11 } 2202 2203 cpqSiMonitorThermalCondition OBJECT-TYPE 2204 SYNTAX INTEGER { 2205 other(1), 2206 ok(2), 2207 degraded(3) 2208 } 2209 ACCESS read-only 2210 STATUS mandatory 2211 DESCRIPTION 2212 "This provides the condition of the monitor's internal temperature. 2213 2214 This value will be one of the following: 2215 2216 other(1) 2217 Monitor thermal fault reporting is not supported by this monitor 2218 or the Insight Agent does not recognize the status. You may 2219 need to upgrade your software. 2220 2221 ok(2) 2222 The internal temperature is within normal limits. 2223 2224 degraded(3) 2225 The internal temperature is outside normal operating range." 2226 ::= { cpqSiMonitorEntry 12 } 2227 2228 cpqSiMonitorOperationalCondition OBJECT-TYPE 2229 SYNTAX INTEGER { 2230 other(1), 2231 ok(2), 2232 degraded(3), 2233 failed(4) 2234 } 2235 ACCESS read-only 2236 STATUS mandatory 2237 DESCRIPTION 2238 "This provides the condition of the monitor's operational features. 2239 2240 This condition value will be one of the following: 2241 2242 other(1) 2243 Monitor operational fault reporting is not supported by this 2244 monitor or the Insight Agent does not recognize the status. 2245 You may need to upgrade your software. 2246 2247 ok(2) 2248 The monitor is operating within normal limits. 2249 2250 degraded(3) 2251 The monitor is not functioning within normal operating limits. 2252 At least one of the operational features has become degraded. 2253 2254 failed(4) 2255 The monitor is not functioning within normal operating limits. 2256 At least one of the operational features has failed causing the 2257 monitor to not be usable. The monitor should be replaced." 2258 ::= { cpqSiMonitorEntry 13 } 2259 2260 cpqSiMonitorStatus OBJECT-TYPE 2261 SYNTAX INTEGER { 2262 other(1), 2263 unknown(2), 2264 ok(3), 2265 thermalDegraded(4), 2266 operationalFailure(5) 2267 } 2268 ACCESS read-only 2269 STATUS mandatory 2270 DESCRIPTION 2271 "This provides the status of the monitor's fault reporting features. 2272 2273 This status value will be one of the following: 2274 2275 other(1) 2276 Monitor fault reporting is not supported by this monitor or the 2277 Insight Agent does not recognize the status. You may need to 2278 upgrade your software. 2279 2280 unknown(2) 2281 The monitor status is unknown because the monitor is 2282 either in power saving mode or it has been turned off. 2283 2284 ok(3) 2285 The monitor is operating within normal limits. 2286 2287 thermalDegraded(4) 2288 The monitor's internal temperature is not functioning within 2289 normal operating limits. 2290 2291 operationalFailure(5) 2292 The monitor is not functioning within normal operating limits. 2293 At least one of the operational features has failed. 2294 The monitor should be replaced." 2295 2296 ::= { cpqSiMonitorEntry 14 } 2297 2298 2299-- **************************************************************************** 2300-- System Information Hot Plug Slot Group 2301-- ====================================== 2302-- 2303-- The compaq enterprise (1.3.6.1.4.1.232) 2304-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 2305-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 2306-- cpqSiHotPlugSlot Group (1.3.6.1.4.1.232.2.2.9) 2307-- 2308-- The cpqSiHotPlugSlot group describes the System Information Hot Plug 2309-- slot information. 2310-- 2311-- Implementation of the cpqSiHotPlugSlot group is mandatory for all 2312-- agents that support the System Information MIB. 2313-- 2314-- **************************************************************************** 2315 2316 cpqSiHotPlugSlotSupported OBJECT-TYPE 2317 SYNTAX INTEGER { 2318 other(1), 2319 notSupported(2), 2320 supported(3) 2321 } 2322 ACCESS read-only 2323 STATUS mandatory 2324 DESCRIPTION 2325 "This value specifies if this system supports the Hot 2326 Pluggable Slot feature." 2327 ::= { cpqSiHotPlugSlot 1 } 2328 2329 cpqSiHotPlugSlotCondition OBJECT-TYPE 2330 SYNTAX INTEGER { 2331 other(1), 2332 ok(2), 2333 degraded(3), 2334 failed(4) 2335 } 2336 ACCESS read-only 2337 STATUS mandatory 2338 DESCRIPTION 2339 "This value specifies the overall condition of the Hot Plug 2340 Slot feature. 2341 2342 The Hot Plug condition is set as follows: 2343 2344 other(1) 2345 When Hot Plug Slots are not supported or condition is unknown. 2346 2347 ok(2) 2348 If there are no hot plug slots with a condition of degraded 2349 or failed. 2350 2351 degraded(3) 2352 If there are degraded slot entries but none failed. 2353 2354 failed(4) 2355 If there are failed slot entries." 2356 ::= { cpqSiHotPlugSlot 2 } 2357 2358 cpqSiHotPlugSlotChangeCount OBJECT-TYPE 2359 SYNTAX INTEGER 2360 ACCESS read-only 2361 STATUS mandatory 2362 DESCRIPTION 2363 "This value will be incremented each time a hot plug event 2364 occurs resulting in a change in the hot plug slot table." 2365 ::= { cpqSiHotPlugSlot 3 } 2366 2367 2368-- **************************************************************************** 2369-- System Information Hot Plug Slot Table 2370-- ====================================== 2371-- 2372-- The compaq enterprise (1.3.6.1.4.1.232) 2373-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 2374-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 2375-- cpqSiHotPlugSlot Group (1.3.6.1.4.1.232.2.2.9) 2376-- cpqSiHotPlugSlotTable (1.3.6.1.4.1.232.2.2.9.4) 2377-- 2378-- The cpqSiHotPlugSlot group describes the manageable Hot Plug 2379-- Slots in the system. This table will be missing if the system does 2380-- not support hot plug slots. 2381-- 2382-- **************************************************************************** 2383 2384 cpqSiHotPlugSlotTable OBJECT-TYPE 2385 SYNTAX SEQUENCE OF CpqSiHotPlugSlotEntry 2386 ACCESS not-accessible 2387 STATUS mandatory 2388 DESCRIPTION 2389 "A list of Hot Plug Slot information entries." 2390 ::= { cpqSiHotPlugSlot 4 } 2391 2392 cpqSiHotPlugSlotEntry OBJECT-TYPE 2393 SYNTAX CpqSiHotPlugSlotEntry 2394 ACCESS not-accessible 2395 STATUS mandatory 2396 DESCRIPTION 2397 "A description of a Hot Plug Slot." 2398 INDEX { cpqSiHotPlugSlotChassis, cpqSiHotPlugSlotIndex } 2399 ::= { cpqSiHotPlugSlotTable 1 } 2400 2401 CpqSiHotPlugSlotEntry ::= SEQUENCE { 2402 cpqSiHotPlugSlotChassis INTEGER, 2403 cpqSiHotPlugSlotIndex INTEGER, 2404 cpqSiHotPlugSlotBoardPresent INTEGER, 2405 cpqSiHotPlugSlotPowerState INTEGER, 2406 cpqSiHotPlugSlotBoardCondition INTEGER, 2407 cpqSiHotPlugSlotErrorStatus INTEGER, 2408 cpqSiHotPlugSlotHwLocation DisplayString 2409 } 2410 2411 cpqSiHotPlugSlotChassis OBJECT-TYPE 2412 SYNTAX INTEGER (0..255) 2413 ACCESS read-only 2414 STATUS mandatory 2415 DESCRIPTION 2416 "The Chassis where this hot plug slot resides." 2417 ::= { cpqSiHotPlugSlotEntry 1 } 2418 2419 cpqSiHotPlugSlotIndex OBJECT-TYPE 2420 SYNTAX INTEGER (0..255) 2421 ACCESS read-only 2422 STATUS mandatory 2423 DESCRIPTION 2424 "The slot within the chassis for this hot plug slot." 2425 ::= { cpqSiHotPlugSlotEntry 2 } 2426 2427 cpqSiHotPlugSlotBoardPresent OBJECT-TYPE 2428 SYNTAX INTEGER { 2429 other(1), 2430 present(2), 2431 absent(3), 2432 presentButSuspended(4) 2433 } 2434 ACCESS read-only 2435 STATUS mandatory 2436 DESCRIPTION 2437 "This value indicates whether a board is present(2) in or 2438 absent(3) from the slot. A value of other(1) indicates 2439 the information could not be obtained." 2440 ::= { cpqSiHotPlugSlotEntry 3 } 2441 2442 cpqSiHotPlugSlotPowerState OBJECT-TYPE 2443 SYNTAX INTEGER { 2444 other(1), 2445 powerOn(2), 2446 powerOff(3) 2447 } 2448 ACCESS read-only 2449 STATUS mandatory 2450 DESCRIPTION 2451 "This value is set to powerOn(2) when power is being supplied 2452 to the slot and powerOff(3) when power is not being supplied. 2453 A value of other(1) indicates the information could not be 2454 obtained." 2455 ::= { cpqSiHotPlugSlotEntry 4 } 2456 2457 cpqSiHotPlugSlotBoardCondition OBJECT-TYPE 2458 SYNTAX INTEGER { 2459 other(1), 2460 ok(2), 2461 degraded(3), 2462 failed(4) 2463 } 2464 ACCESS read-only 2465 STATUS mandatory 2466 DESCRIPTION 2467 "This value specifies the condition of the hot plug slot. 2468 2469 The hot plug condition is set as follows: 2470 2471 other(1) 2472 When the condition could not be determined. 2473 2474 ok(2) 2475 The slot is powered up and operating normally. 2476 2477 degraded(3) 2478 If the board in the slot is not fully functioning. 2479 2480 failed(4) 2481 If the slot is failed for any reason. See the status code 2482 for more information on the failure." 2483 ::= { cpqSiHotPlugSlotEntry 5 } 2484 2485 cpqSiHotPlugSlotErrorStatus OBJECT-TYPE 2486 SYNTAX INTEGER { 2487 noError(1), 2488 generalError(2), 2489 wrongRevision(3), 2490 wrongBoard(4), 2491 cannotConfig(5), 2492 powerFault(6), 2493 unexpectedPowerLoss(7), 2494 wrongSpeed(8), 2495 functionalFailure(9) 2496 } 2497 ACCESS read-only 2498 STATUS mandatory 2499 DESCRIPTION 2500 "This value specifies the status of the hot plug slot. 2501 2502 The hot plug slot status is set as follows: 2503 2504 noError(1) 2505 The slot is operating normally. 2506 2507 generalError(2) 2508 A general error occurred. 2509 2510 wrongRevision(3) 2511 The revision of the replacement adapter was different from 2512 the original adapter. 2513 2514 wrongBoard(4) 2515 The model of the replacement adapter was different from the 2516 original adapter. 2517 2518 cannotConfig(5) 2519 The adapter could not be configured. 2520 2521 powerFault(6) 2522 A power fault occurred for the slot. 2523 2524 unexpectedPowerLoss(7) 2525 Power was unexpectedly lost from the slot. 2526 2527 wrongSpeed(8) 2528 The adapter cannot be run at the current bus speed. 2529 2530 functionlFailure(9) 2531 The adapter is not functioning correctly. This may 2532 be caused by a cabling problem." 2533 ::= { cpqSiHotPlugSlotEntry 6 } 2534 2535 cpqSiHotPlugSlotHwLocation OBJECT-TYPE 2536 SYNTAX DisplayString (SIZE (0..255)) 2537 ACCESS read-only 2538 STATUS optional 2539 DESCRIPTION 2540 "A text description of the hardware location, on complex 2541 multi SBB hardware only, for the hot plug slot. 2542 A NULL string indicates that the hardware location could not 2543 be determined or is irrelevant." 2544 ::= { cpqSiHotPlugSlotEntry 7 } 2545 2546-- **************************************************************************** 2547-- System Information System Battery Group 2548-- ======================================= 2549-- 2550-- The compaq enterprise (1.3.6.1.4.1.232) 2551-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 2552-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 2553-- cpqSiSystemBattery Group (1.3.6.1.4.1.232.2.2.10) 2554-- 2555-- The cpqSiSystemBattery group describes information about the system 2556-- (portable) batteries that are used to power your system. These 2557-- are the rechargeable batteries. 2558-- 2559-- 2560-- Implementation of the cpqSiBattery group is mandatory for all 2561-- agents that support the System Information MIB. 2562-- 2563-- **************************************************************************** 2564 2565 2566 cpqSiSystemBatteryOverallCondition OBJECT-TYPE 2567 SYNTAX INTEGER { 2568 other(1), 2569 ok(2), 2570 degraded(3), 2571 failed(4) 2572 } 2573 ACCESS read-only 2574 STATUS mandatory 2575 DESCRIPTION 2576 "This value specifies the overall condition of all of the 2577 system batteries. 2578 2579 The following conditions are supported: 2580 2581 other(1) 2582 The system does not use system batteries or the battery 2583 condition is unknown. 2584 2585 ok(2) 2586 All System Batteries are operating OK. 2587 2588 degraded(3) 2589 One or more of the System Batteries has degraded. The 2590 degraded battery will continue to function but should be 2591 replaced. 2592 2593 failed(4) 2594 One of more of the System Batteries has failed. The failed 2595 battery is no longer usable. Action should be taken to replace 2596 the battery." 2597 ::= { cpqSiSystemBattery 1 } 2598 2599 2600-- **************************************************************************** 2601-- System Information System Battery Group 2602-- ======================================= 2603-- 2604-- The compaq enterprise (1.3.6.1.4.1.232) 2605-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 2606-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 2607-- cpqSiSystemBattery Group (1.3.6.1.4.1.232.2.2.10) 2608-- cpqSiSystemBatteryTable (1.3.6.1.4.1.232.2.2.10.2) 2609-- cpqSiSystemBatteryEntry (1.3.6.1.4.1.232.2.2.10.2.1) 2610-- 2611-- The System Battery Table describes asset, physical, and status 2612-- information about the portable batteries powering your system. 2613-- 2614-- **************************************************************************** 2615 2616 cpqSiSysBatteryTable OBJECT-TYPE 2617 SYNTAX SEQUENCE OF CpqSiSysBatteryEntry 2618 ACCESS not-accessible 2619 STATUS mandatory 2620 DESCRIPTION 2621 "A table of System Batteries." 2622 ::= { cpqSiSystemBattery 2 } 2623 2624 cpqSiSysBatteryEntry OBJECT-TYPE 2625 SYNTAX CpqSiSysBatteryEntry 2626 ACCESS not-accessible 2627 STATUS mandatory 2628 DESCRIPTION 2629 "A system battery description." 2630 INDEX { cpqSiSysBatteryIndex } 2631 ::= { cpqSiSysBatteryTable 1 } 2632 2633 CpqSiSysBatteryEntry ::= SEQUENCE { 2634 cpqSiSysBatteryIndex INTEGER, 2635 cpqSiSysBatteryModel DisplayString, 2636 cpqSiSysBatterySerialNum DisplayString, 2637 cpqSiSysBatteryAssetTag DisplayString, 2638 cpqSiSysBatteryManufacturer DisplayString, 2639 cpqSiSysBatteryDate OCTET STRING, 2640 cpqSiSysBatterySmartVersion DisplayString, 2641 cpqSiSysBatteryCondition INTEGER, 2642 cpqSiSysBatteryStatus INTEGER, 2643 cpqSiSysBatteryChemistry INTEGER, 2644 cpqSiSysBatteryRemainingCap INTEGER, 2645 cpqSiSysBatteryFirmwareRevision INTEGER, 2646 cpqSiSysBatteryHardwareRevision INTEGER, 2647 cpqSiSysBatteryFullCap INTEGER, 2648 cpqSiSysBatteryDesignCap INTEGER, 2649 cpqSiSysBatteryHwLocation DisplayString 2650 } 2651 2652 cpqSiSysBatteryIndex OBJECT-TYPE 2653 SYNTAX INTEGER (0..65535) 2654 ACCESS read-only 2655 STATUS mandatory 2656 DESCRIPTION 2657 "A unique index for this battery entry." 2658 ::= { cpqSiSysBatteryEntry 1 } 2659 2660 2661 cpqSiSysBatteryModel OBJECT-TYPE 2662 SYNTAX DisplayString (SIZE (0..255)) 2663 ACCESS read-only 2664 STATUS mandatory 2665 DESCRIPTION 2666 "The model name for this battery." 2667 ::= { cpqSiSysBatteryEntry 2 } 2668 2669 cpqSiSysBatterySerialNum OBJECT-TYPE 2670 SYNTAX DisplayString (SIZE (0..255)) 2671 ACCESS read-only 2672 STATUS mandatory 2673 DESCRIPTION 2674 "The serial number for this battery." 2675 ::= { cpqSiSysBatteryEntry 3 } 2676 2677 cpqSiSysBatteryAssetTag OBJECT-TYPE 2678 SYNTAX DisplayString (SIZE (0..255)) 2679 ACCESS read-only 2680 STATUS mandatory 2681 DESCRIPTION 2682 "This is the customer changeable battery identifier that is set 2683 to this system battery's serial number at the time of 2684 manufacture. 2685 2686 The string will be empty if the battery does support 2687 this function." 2688 ::= { cpqSiSysBatteryEntry 4 } 2689 2690 cpqSiSysBatteryManufacturer OBJECT-TYPE 2691 SYNTAX DisplayString (SIZE (0..255)) 2692 ACCESS read-only 2693 STATUS mandatory 2694 DESCRIPTION 2695 "The battery's manufacturer's name. 2696 2697 The string will be empty if the battery does support 2698 this function." 2699 ::= { cpqSiSysBatteryEntry 5 } 2700 2701 2702 cpqSiSysBatteryDate OBJECT-TYPE 2703 SYNTAX OCTET STRING (SIZE (7)) 2704 ACCESS read-only 2705 STATUS mandatory 2706 DESCRIPTION 2707 "The battery's manufacture date. 2708 2709 field octets contents range 2710 ===== ====== ======= ===== 2711 1 1-2 year 0..65536 2712 2 3 month 1..12 2713 3 4 day 1..31 2714 4 5 hour 0..23 2715 5 6 minute 0..59 2716 6 7 second 0..60 2717 (use 60 for leap-second) 2718 2719 This field will be set to year = 0 if the agent cannot provide 2720 the module date. The hour, minute, and second field will be set 2721 to zero (0) if they are not relevant. The year field is set 2722 with the most significant octet first. 2723 2724 The string will be empty if the battery does support 2725 this function." 2726 ::= { cpqSiSysBatteryEntry 6 } 2727 2728 cpqSiSysBatterySmartVersion OBJECT-TYPE 2729 SYNTAX DisplayString (SIZE (0..255)) 2730 ACCESS read-only 2731 STATUS mandatory 2732 DESCRIPTION 2733 "The Smart Battery Data Specification version number supported by this 2734 battery. 2735 2736 The string will be empty if the system battery does support 2737 this function." 2738 ::= { cpqSiSysBatteryEntry 7 } 2739 2740 cpqSiSysBatteryCondition OBJECT-TYPE 2741 SYNTAX INTEGER { 2742 other(1), 2743 ok(2), 2744 degraded(3), 2745 failed(4) 2746 } 2747 ACCESS read-only 2748 STATUS mandatory 2749 DESCRIPTION 2750 "This provides the current condition of this system battery. 2751 2752 The following status values are supported: 2753 2754 other(1) 2755 The battery does not support condition monitoring or 2756 the Insight Agent cannot determine condition. 2757 2758 ok(2) 2759 The battery is operating normally. No user action is 2760 required. 2761 2762 degraded(3) 2763 The battery is degraded. The battery is still usable 2764 but should be replaced. 2765 2766 failed(4) 2767 The battery has failed. The battery is no longer 2768 usable and should be replaced soon." 2769 ::= { cpqSiSysBatteryEntry 8 } 2770 2771 cpqSiSysBatteryStatus OBJECT-TYPE 2772 SYNTAX INTEGER { 2773 other(1), 2774 ok(2), 2775 capacityDegraded(3), 2776 chargeFault(4), 2777 batteryFailure(5) 2778 } 2779 ACCESS read-only 2780 STATUS mandatory 2781 DESCRIPTION 2782 "This provides the current status of the battery. 2783 2784 The following status values are supported: 2785 2786 other(1): 2787 This battery does not support status reporting. 2788 2789 ok(2): 2790 The battery is operating ok. 2791 2792 User Action: No action required. 2793 2794 capacityDegraded(3): 2795 Significant battery degradation has occurred. 2796 The battery can no longer be fully recharged. 2797 2798 User Action: 2799 If using multiple batteries, run the Power 2800 Conservation Utility to identify the battery 2801 location. Contact your System Administrator or 2802 Authorized Reseller to order a replacement 2803 battery. 2804 2805 chargeFault(4): 2806 One or more batteries are not functioning properly. 2807 2808 User Action: 2809 Make sure all batteries are operating in the 2810 recommended temperature range. Check for foreign 2811 objects in the battery slots. Remove and reinsert all 2812 batteries to resume normal battery operation. 2813 Contact your System Administrator or Authorized 2814 Reseller if you are still experiencing problems. 2815 2816 batteryFailure(5): 2817 The battery has failed and must be replaced. 2818 2819 User Action: 2820 Contact your System Administrator or Authorized 2821 Reseller to order a replacement battery. Recycle your 2822 old battery. For proper disposal information, refer 2823 to the documentation that came with your computer." 2824 2825 ::= { cpqSiSysBatteryEntry 9 } 2826 2827 cpqSiSysBatteryChemistry OBJECT-TYPE 2828 SYNTAX INTEGER { 2829 other(1), 2830 unknown(2), 2831 lead-Acid(3), 2832 nickel-Cadmium(4), 2833 nickel-Metal-Hydride(5), 2834 lithium-Ion(6), 2835 zinc-Air(7), 2836 lithium-Polymer(8) 2837 } 2838 ACCESS read-only 2839 STATUS mandatory 2840 DESCRIPTION 2841 "The chemistry of the battery." 2842 2843 ::= { cpqSiSysBatteryEntry 10 } 2844 2845 cpqSiSysBatteryRemainingCap OBJECT-TYPE 2846 SYNTAX INTEGER (0..65535) 2847 ACCESS read-only 2848 STATUS mandatory 2849 DESCRIPTION 2850 "This is a percentage of the battery's remaining capacity 2851 from its design capacity. 2852 2853 If this attribute is not supported, 65535 is returned." 2854 ::= { cpqSiSysBatteryEntry 11 } 2855 2856 cpqSiSysBatteryFirmwareRevision OBJECT-TYPE 2857 SYNTAX INTEGER (0..255) 2858 ACCESS read-only 2859 STATUS mandatory 2860 DESCRIPTION 2861 "This is the revision level of the firmware on the battery. 2862 2863 If this attribute is not supported, 255 is returned." 2864 ::= { cpqSiSysBatteryEntry 12 } 2865 2866 cpqSiSysBatteryHardwareRevision OBJECT-TYPE 2867 SYNTAX INTEGER (0..255) 2868 ACCESS read-only 2869 STATUS mandatory 2870 DESCRIPTION 2871 "This is the revision level of the hardware on the battery. 2872 2873 If this attribute is not supported, 255 is returned." 2874 ::= { cpqSiSysBatteryEntry 13 } 2875 2876 cpqSiSysBatteryFullCap OBJECT-TYPE 2877 SYNTAX INTEGER (0..65535) 2878 ACCESS read-only 2879 STATUS mandatory 2880 DESCRIPTION 2881 "This is the mWatt-Hours of the battery's Full capacity on 2882 the current charge. 2883 2884 If this attribute is not supported, 65535 is returned." 2885 ::= { cpqSiSysBatteryEntry 14 } 2886 2887 cpqSiSysBatteryDesignCap OBJECT-TYPE 2888 SYNTAX INTEGER (0..65535) 2889 ACCESS read-only 2890 STATUS mandatory 2891 DESCRIPTION 2892 "This is the mWatt-Hours of the battery's design capacity as 2893 specified by the manufacturer. 2894 2895 If this attribute is not supported, 65535 is returned." 2896 ::= { cpqSiSysBatteryEntry 15 } 2897 2898 cpqSiSysBatteryHwLocation OBJECT-TYPE 2899 SYNTAX DisplayString (SIZE (0..255)) 2900 ACCESS read-only 2901 STATUS optional 2902 DESCRIPTION 2903 "A text description of the hardware location, on complex 2904 multi SBB hardware only, for the battery. 2905 A NULL string indicates that the hardware location could not 2906 be determined or is irrelevant." 2907 ::= { cpqSiSysBatteryEntry 16 } 2908 2909 2910-- **************************************************************************** 2911-- System Information Docking Station Group 2912-- ======================================== 2913-- 2914-- The compaq enterprise (1.3.6.1.4.1.232) 2915-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 2916-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 2917-- cpqSiDockingStation Group (1.3.6.1.4.1.232.2.2.11) 2918-- 2919-- The cpqsiDockingStation group describes the asset information 2920-- about portable docking stations. 2921-- 2922-- 2923-- Implementation of the cpqSiDockingStation group is mandatory for all 2924-- agents that support the System Information MIB. 2925-- 2926-- **************************************************************************** 2927 2928 cpqSiDockingStationStatus OBJECT-TYPE 2929 SYNTAX INTEGER { 2930 notSupported(1), 2931 docked(2), 2932 undocked(3) 2933 } 2934 ACCESS read-only 2935 STATUS mandatory 2936 DESCRIPTION 2937 "This value specifies the connection of the computer 2938 system to a docking station. 2939 2940 The following connection states are supported: 2941 2942 notSupported(1) 2943 This system does not interface to a docking station. 2944 2945 docked(2) 2946 This system is connected to a docking station. 2947 2948 undocked(3) 2949 This system is not connect to a docking station." 2950 ::= { cpqSiDockingStation 1} 2951 2952 cpqSiDockingStationSerialNum OBJECT-TYPE 2953 SYNTAX DisplayString (SIZE (0..255)) 2954 ACCESS read-only 2955 STATUS mandatory 2956 DESCRIPTION 2957 "The serial number of the docking station. 2958 2959 The string will be empty if the docking station does not support a 2960 serial or the system does not interface to a docking station." 2961 ::= { cpqSiDockingStation 2 } 2962 2963 cpqSiDockingStationModel OBJECT-TYPE 2964 SYNTAX DisplayString (SIZE (0..255)) 2965 ACCESS read-only 2966 STATUS mandatory 2967 DESCRIPTION 2968 "The model name of the docking station. 2969 2970 The string will be empty if the docking station does not report the 2971 model name or the system does not interface to a docking station." 2972 ::= { cpqSiDockingStation 3 } 2973 2974 cpqSiDockingStationAssetTag OBJECT-TYPE 2975 SYNTAX DisplayString (SIZE (0..255)) 2976 ACCESS read-only 2977 STATUS mandatory 2978 DESCRIPTION 2979 "This is a customer changeable identifier that is set to the docking 2980 station serial number at the time of manufacture. 2981 2982 The string will be empty if the docking station does not report an 2983 asset tag or the system does not interface to a docking station." 2984 ::= { cpqSiDockingStation 4} 2985 2986-- **************************************************************************** 2987-- System Information FRU Group 2988-- ============================ 2989-- 2990-- The compaq enterprise (1.3.6.1.4.1.232) 2991-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 2992-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 2993-- cpqSiFru Group (1.3.6.1.4.1.232.2.2.12) 2994-- 2995-- The cpqsiFru group describes the Field Replaceable Units in the 2996-- server system. 2997-- 2998-- 2999-- Implementation of the cpqSiFru group is mandatory for all 3000-- Server Agents that support the System Information MIB. 3001-- 3002-- **************************************************************************** 3003 3004 cpqSiFruTable OBJECT-TYPE 3005 SYNTAX SEQUENCE OF CpqSiFruEntry 3006 ACCESS not-accessible 3007 STATUS mandatory 3008 DESCRIPTION 3009 "Table of Field Replaceable Units of system, providing 3010 inventory and asset control information. This table is 3011 referenced from logical hardware descriptions elsewhere in 3012 the MIB." 3013 ::= { cpqSiFru 1 } 3014 3015 cpqSiFruEntry OBJECT-TYPE 3016 SYNTAX CpqSiFruEntry 3017 ACCESS not-accessible 3018 STATUS mandatory 3019 DESCRIPTION 3020 "Each entry represents a Field Replaceable Unit (FRU) of hardware." 3021 INDEX { cpqSiFruIndex } 3022 ::= { cpqSiFruTable 1 } 3023 3024 CpqSiFruEntry ::= 3025 SEQUENCE { 3026 cpqSiFruIndex INTEGER, 3027 cpqSiFruType INTEGER, 3028 cpqSiFruDescr DisplayString, 3029 cpqSiFruVendor DisplayString, 3030 cpqSiFruPartNumber DisplayString, 3031 cpqSiFruRevision DisplayString, 3032 cpqSiFruFirmwareRevision DisplayString, 3033 cpqSiFruSerialNumber DisplayString, 3034 cpqSiFruAssetNo DisplayString, 3035 cpqSiFruClass INTEGER, 3036 cpqSiFruSlotNumber DisplayString, 3037 cpqSiFruSubAssemblyNumber INTEGER, 3038 cpqSiFruAssemblyNumber INTEGER, 3039 cpqSiFruChassisNumber INTEGER, 3040 cpqSiFruPositionNumber INTEGER, 3041 cpqSiFruCabinetIDNumber INTEGER, 3042 cpqSiFruSiteLocation INTEGER, 3043 cpqSiFruDiagStatus INTEGER, 3044 cpqSiFruExtendedDiagStatus INTEGER, 3045 cpqSiFruCellTablePtr INTEGER, 3046 cpqSiFruIOCTablePtr INTEGER, 3047 cpqSiFruFileId DisplayString, 3048 cpqSiFruScanRev DisplayString 3049 } 3050 3051 cpqSiFruIndex OBJECT-TYPE 3052 SYNTAX INTEGER 3053 ACCESS read-only 3054 STATUS mandatory 3055 DESCRIPTION 3056 "A locally-unique index value." 3057 ::= { cpqSiFruEntry 1 } 3058 3059 cpqSiFruType OBJECT-TYPE 3060 SYNTAX INTEGER { 3061 unknown(1) , 3062 other(2) , 3063 motherBoard(3) , 3064 processor(4) , 3065 memoryCard(5) , 3066 memoryModule(6) , 3067 peripheralDevice(7) , 3068 systemBusBridge(8) , 3069 powerSupply(9) , 3070 chassis(10) , 3071 fan(11) , 3072 ioCard(12) 3073 } 3074 ACCESS read-only 3075 STATUS mandatory 3076 DESCRIPTION 3077 "General category of the type of FRU that this is." 3078 ::= { cpqSiFruEntry 2 } 3079 3080 cpqSiFruDescr OBJECT-TYPE 3081 SYNTAX DisplayString 3082 ACCESS read-write 3083 STATUS mandatory 3084 DESCRIPTION 3085 "More detailed description of FRU type, if known." 3086 ::= { cpqSiFruEntry 3 } 3087 3088 cpqSiFruVendor OBJECT-TYPE 3089 SYNTAX DisplayString 3090 ACCESS read-only 3091 STATUS mandatory 3092 DESCRIPTION 3093 "Manufacturer name or ID." 3094 ::= { cpqSiFruEntry 4 } 3095 3096 cpqSiFruPartNumber OBJECT-TYPE 3097 SYNTAX DisplayString 3098 ACCESS read-only 3099 STATUS mandatory 3100 DESCRIPTION 3101 "Number by which this unit is orderable." 3102 ::= { cpqSiFruEntry 5 } 3103 3104 cpqSiFruRevision OBJECT-TYPE 3105 SYNTAX DisplayString 3106 ACCESS read-only 3107 STATUS mandatory 3108 DESCRIPTION 3109 "Version number of this unit. If artwork level is available, it will 3110 appear as 'Artwork: XXX' following FRU version portion." 3111 ::= { cpqSiFruEntry 6 } 3112 3113 cpqSiFruFirmwareRevision OBJECT-TYPE 3114 SYNTAX DisplayString 3115 ACCESS read-only 3116 STATUS mandatory 3117 DESCRIPTION 3118 "The revision of the firmware, if any. Otherwise null." 3119 ::= { cpqSiFruEntry 7 } 3120 3121 cpqSiFruSerialNumber OBJECT-TYPE 3122 SYNTAX DisplayString 3123 ACCESS read-only 3124 STATUS mandatory 3125 DESCRIPTION 3126 "The serial number of this unit's instance." 3127 ::= { cpqSiFruEntry 8 } 3128 3129 cpqSiFruAssetNo OBJECT-TYPE 3130 SYNTAX DisplayString 3131 ACCESS read-write 3132 STATUS mandatory 3133 DESCRIPTION 3134 "The asset number for this unit. This string may be limited." 3135 ::= { cpqSiFruEntry 9 } 3136 3137 cpqSiFruClass OBJECT-TYPE 3138 SYNTAX INTEGER { 3139 unknown(1) , 3140 other(2) , 3141 currentBoardInSlot(3) , 3142 priorBoardInSlot(4) , 3143 parentBoard(5) , 3144 priorParentBoard(6) , 3145 priorParentSystem(7) 3146 } 3147 ACCESS read-only 3148 STATUS mandatory 3149 DESCRIPTION 3150 "Represents the status category of the unit." 3151 ::= { cpqSiFruEntry 10 } 3152 3153 cpqSiFruSlotNumber OBJECT-TYPE 3154 SYNTAX DisplayString 3155 ACCESS read-only 3156 STATUS mandatory 3157 DESCRIPTION 3158 "Physical slot number of FRU." 3159 ::= { cpqSiFruEntry 11 } 3160 3161 cpqSiFruSubAssemblyNumber OBJECT-TYPE 3162 SYNTAX INTEGER 3163 ACCESS read-only 3164 STATUS mandatory 3165 DESCRIPTION 3166 "Subassembly containing this FRU. From FRU V5.0." 3167 ::= { cpqSiFruEntry 12 } 3168 3169 cpqSiFruAssemblyNumber OBJECT-TYPE 3170 SYNTAX INTEGER 3171 ACCESS read-only 3172 STATUS mandatory 3173 DESCRIPTION 3174 "Assembly containing this FRU. From FRU V5.0." 3175 ::= { cpqSiFruEntry 13 } 3176 3177 cpqSiFruChassisNumber OBJECT-TYPE 3178 SYNTAX INTEGER 3179 ACCESS read-only 3180 STATUS mandatory 3181 DESCRIPTION 3182 "Chassis containing this FRU. From FRU V5.0." 3183 ::= { cpqSiFruEntry 14 } 3184 3185 cpqSiFruPositionNumber OBJECT-TYPE 3186 SYNTAX INTEGER 3187 ACCESS read-only 3188 STATUS mandatory 3189 DESCRIPTION 3190 "Position in Chassis to help locate FRU. From FRU V5.0." 3191 ::= { cpqSiFruEntry 15 } 3192 3193 cpqSiFruCabinetIDNumber OBJECT-TYPE 3194 SYNTAX INTEGER 3195 ACCESS read-only 3196 STATUS mandatory 3197 DESCRIPTION 3198 "Cabinet number containing this FRU. From FRU V5.0." 3199 ::= { cpqSiFruEntry 16 } 3200 3201 cpqSiFruSiteLocation OBJECT-TYPE 3202 SYNTAX INTEGER 3203 ACCESS read-only 3204 STATUS mandatory 3205 DESCRIPTION 3206 "Site code for system containing this FRU. From FRU V5.0." 3207 ::= { cpqSiFruEntry 17 } 3208 3209 cpqSiFruDiagStatus OBJECT-TYPE 3210 SYNTAX INTEGER { 3211 unknown(1), 3212 ok(2), 3213 degraded(3), 3214 failed(4), 3215 disabled(5) 3216 } 3217 ACCESS read-only 3218 STATUS mandatory 3219 DESCRIPTION 3220 "Use system status values to describe current state of the 3221 FRU." 3222 ::= { cpqSiFruEntry 18 } 3223 3224 cpqSiFruExtendedDiagStatus OBJECT-TYPE 3225 SYNTAX INTEGER 3226 ACCESS read-only 3227 STATUS mandatory 3228 DESCRIPTION 3229 "Diagnostic Status value returned by Device Specific 3230 diagnostics. Usually through a diagnostic status register 3231 on the device. See product manual for bit descriptions." 3232 ::= { cpqSiFruEntry 19 } 3233 3234 cpqSiFruCellTablePtr OBJECT-TYPE 3235 SYNTAX INTEGER 3236 ACCESS read-only 3237 STATUS optional 3238 DESCRIPTION 3239 "Index for the cell in cpqSeCellTable where this FRU is physically located." 3240 ::= { cpqSiFruEntry 20 } 3241 3242 cpqSiFruIOCTablePtr OBJECT-TYPE 3243 SYNTAX INTEGER 3244 ACCESS read-only 3245 STATUS optional 3246 DESCRIPTION 3247 "Index for the I/O Chassis in cpqSeIOCTablePtr where this FRU is physically located" 3248 ::= { cpqSiFruEntry 21 } 3249 3250 cpqSiFruFileId OBJECT-TYPE 3251 SYNTAX DisplayString (SIZE (0..255)) 3252 ACCESS read-only 3253 STATUS optional 3254 DESCRIPTION 3255 "This represents the FRU file identifier" 3256 ::= { cpqSiFruEntry 22 } 3257 3258 cpqSiFruScanRev OBJECT-TYPE 3259 SYNTAX DisplayString (SIZE (0..255)) 3260 ACCESS read-only 3261 STATUS optional 3262 DESCRIPTION 3263 "This represents FRU scan revision" 3264 ::= { cpqSiFruEntry 23 } 3265 3266-- **************************************************************************** 3267-- System Information Rack and Enclosure Group 3268-- =========================================== 3269-- 3270-- The compaq enterprise (1.3.6.1.4.1.232) 3271-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 3272-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 3273-- cpqSiRackEnclosure Group (1.3.6.1.4.1.232.2.2.13) 3274-- 3275-- The cpqSiRackEnclosure group indicates the availability of rack and/or 3276-- enclosure based systems. 3277-- 3278-- **************************************************************************** 3279 3280 cpqSiRackEnclosureMgrTable OBJECT-TYPE 3281 SYNTAX SEQUENCE OF CpqSiRackEnclosureMgrEntry 3282 ACCESS not-accessible 3283 STATUS mandatory 3284 DESCRIPTION 3285 "Table of possible rack and/or enclosure based systems." 3286 ::= { cpqSiRackEnclosure 1 } 3287 3288 cpqSiRackEnclosureMgrEntry OBJECT-TYPE 3289 SYNTAX CpqSiRackEnclosureMgrEntry 3290 ACCESS not-accessible 3291 STATUS mandatory 3292 DESCRIPTION 3293 "A entry for a rack and/or enclosure based system." 3294 INDEX { cpqSiRackEnclosureMgrIndex } 3295 ::= { cpqSiRackEnclosureMgrTable 1 } 3296 3297 CpqSiRackEnclosureMgrEntry ::= 3298 SEQUENCE { 3299 cpqSiRackEnclosureMgrIndex INTEGER, 3300 cpqSiRackEnclosureMgrType INTEGER, 3301 cpqSiRackEnclosureMgrIpAddr DisplayString, 3302 cpqSiRackEnclosureMgrWebLink DisplayString, 3303 cpqSiRackEnclosureMgrCondition INTEGER, 3304 cpqSiRackEnclosureMgrSerialNumber DisplayString, 3305 cpqSiRackEnclosureMgrModel DisplayString, 3306 cpqSiRackEnclosureMgrName DisplayString, 3307 cpqSiRackEnclosureMgrFwRev DisplayString, 3308 cpqSiRackEnclosureMgrProductID DisplayString, 3309 cpqSiRackEnclosureMgrUUID DisplayString, 3310 cpqSiRackEnclosureMgrMatrix INTEGER, 3311 cpqSiRackEnclosureMgrMatrixID DisplayString 3312 } 3313 3314 cpqSiRackEnclosureMgrIndex OBJECT-TYPE 3315 SYNTAX INTEGER 3316 ACCESS read-only 3317 STATUS mandatory 3318 DESCRIPTION 3319 "A locally-unique index value." 3320 ::= { cpqSiRackEnclosureMgrEntry 1 } 3321 3322 cpqSiRackEnclosureMgrType OBJECT-TYPE 3323 SYNTAX INTEGER { 3324 other(1), 3325 noEnclosureManagement(2), 3326 enclosureManagement(3), 3327 onboardAdminManagement(4), 3328 multiboardchassis(5) 3329 } 3330 ACCESS read-only 3331 STATUS mandatory 3332 DESCRIPTION 3333 "This value specifies the type of enclosure management. 3334 3335 other(1) 3336 When the type not be determined. 3337 3338 noEnclosureManagement(2) 3339 The server is part of a rack/enclosure managed system, but there 3340 is no dedicated enclosure manager. 3341 3342 enclosureManagement(3) 3343 The server is part of a rack/enclosure managed system with a 3344 dedicated enclosure manager. 3345 3346 onboardAdminManagement(4) 3347 The server is part of a rack/enclosure managed system with a 3348 onboard Administrator. 3349 3350 multiboardchassis(5) 3351 The server is part of a nultiple board chassis. " 3352 ::= { cpqSiRackEnclosureMgrEntry 2 } 3353 3354 cpqSiRackEnclosureMgrIpAddr OBJECT-TYPE 3355 SYNTAX DisplayString 3356 ACCESS read-only 3357 STATUS mandatory 3358 DESCRIPTION 3359 "The IP address of the rack enclosure manager. 3360 3361 The string will be empty if the enclosure does not report the 3362 information or it could not be determined." 3363 ::= { cpqSiRackEnclosureMgrEntry 3 } 3364 3365 cpqSiRackEnclosureMgrWebLink OBJECT-TYPE 3366 SYNTAX DisplayString 3367 ACCESS read-only 3368 STATUS mandatory 3369 DESCRIPTION 3370 "The web link to the enclosure managers web based management 3371 information for the enclosure. 3372 3373 The string will be empty if the enclosure does not report the 3374 information or it could not be determined." 3375 ::= { cpqSiRackEnclosureMgrEntry 4 } 3376 3377 cpqSiRackEnclosureMgrCondition OBJECT-TYPE 3378 SYNTAX INTEGER { 3379 other(1), 3380 ok(2), 3381 degraded(3), 3382 failed(4) 3383 } 3384 ACCESS read-only 3385 STATUS mandatory 3386 DESCRIPTION 3387 "The overall condition of the Enclosure. For more detailed 3388 status information, follow the cpqSiEnclosureMgrWebLink through 3389 the Web Management Agent interface. 3390 3391 other(1) 3392 This is the default condition for systems when 3393 cpqSiRackEnclosureMgrType has a value of 3394 noEnclosureManagement(2). 3395 3396 When cpqSiRackEnclosureMgrType has a value of 3397 enclosureManagement(3), this indicates the status of the 3398 enclosure manager could not be determined. 3399 3400 ok(2) 3401 The enclosure manager is in an ok state. Follow the 3402 cpqSiRackEnclosureMgrWebLink link in the Web Management Agents 3403 to manage the enclosure. 3404 3405 degraded(3) 3406 The enclosure manager is in a degraded state. Follow the 3407 cpqSiRackEnclosureMgrWebLink link in the Web Management Agents 3408 to manage the enclosure. 3409 3410 failed(4) 3411 The enclosure manager is in a failed state. Follow the 3412 cpqSiRackEnclosureMgrWebLink link in the Web Management Agents 3413 to manage the enclosure." 3414 ::= { cpqSiRackEnclosureMgrEntry 5 } 3415 3416 cpqSiRackEnclosureMgrSerialNumber OBJECT-TYPE 3417 SYNTAX DisplayString 3418 ACCESS read-only 3419 STATUS mandatory 3420 DESCRIPTION 3421 "The serial number of the enclosure. 3422 3423 The string will be empty if the enclosure does not report the 3424 information or it could not be determined." 3425 ::= { cpqSiRackEnclosureMgrEntry 6 } 3426 3427 cpqSiRackEnclosureMgrModel OBJECT-TYPE 3428 SYNTAX DisplayString 3429 ACCESS read-only 3430 STATUS optional 3431 DESCRIPTION 3432 "The model name of the enclosure. 3433 The string will be empty if it could not be determined." 3434 ::= { cpqSiRackEnclosureMgrEntry 7 } 3435 3436 cpqSiRackEnclosureMgrName OBJECT-TYPE 3437 SYNTAX DisplayString 3438 ACCESS read-only 3439 STATUS optional 3440 DESCRIPTION 3441 "The name of the enclosure. This name logically groups together the 3442 Blade servers installed in the same enclosure and it is shared 3443 with the other servers in the enclosure. 3444 The string will be empty if it could not be determined." 3445 ::= { cpqSiRackEnclosureMgrEntry 8 } 3446 3447 cpqSiRackEnclosureMgrFwRev OBJECT-TYPE 3448 SYNTAX DisplayString 3449 ACCESS read-only 3450 STATUS optional 3451 DESCRIPTION 3452 "The Firmware revision of the Enclosure Manager/Onboard Administrator. 3453 The string will be empty if it could not be determined." 3454 ::= { cpqSiRackEnclosureMgrEntry 9 } 3455 3456 cpqSiRackEnclosureMgrProductID OBJECT-TYPE 3457 SYNTAX DisplayString 3458 ACCESS read-only 3459 STATUS optional 3460 DESCRIPTION 3461 "The Enclosure product identifier. The string will be empty 3462 if it could not be determined." 3463 ::= { cpqSiRackEnclosureMgrEntry 10 } 3464 3465 cpqSiRackEnclosureMgrUUID OBJECT-TYPE 3466 SYNTAX DisplayString 3467 ACCESS read-only 3468 STATUS optional 3469 DESCRIPTION 3470 "The Enclosure unique identifier. The string will be empty 3471 if it could not be determined." 3472 ::= { cpqSiRackEnclosureMgrEntry 11 } 3473 3474 cpqSiRackEnclosureMgrMatrix OBJECT-TYPE 3475 SYNTAX INTEGER 3476 ACCESS read-only 3477 STATUS mandatory 3478 DESCRIPTION 3479 " Value 0 not configured in a BladeSystem Matrix environment. 3480 1 configured in a BladeSystem Matrix environment." 3481 ::= { cpqSiRackEnclosureMgrEntry 12 } 3482 3483 cpqSiRackEnclosureMgrMatrixID OBJECT-TYPE 3484 SYNTAX DisplayString 3485 ACCESS read-only 3486 STATUS optional 3487 DESCRIPTION 3488 " Value BladeSystem Matrix vX.Y.Z Where 3489 X major version. 3490 Y minor version. 3491 Z update version. 3492 Is only valid if cpqSiRackEnclosureMgrMatrix value is a 1. 3493 By default is NULL" 3494 ::= { cpqSiRackEnclosureMgrEntry 13 } 3495 3496-- **************************************************************************** 3497-- System Information Server Blade Group 3498-- =========================================== 3499-- 3500-- The compaq enterprise (1.3.6.1.4.1.232) 3501-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 3502-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 3503-- cpqSiServerBlade Group (1.3.6.1.4.1.232.2.2.14) 3504-- 3505-- The cpqsiServerBlade group describes the server Blade system. 3506-- 3507-- **************************************************************************** 3508 3509 cpqSiServerBladeEnclosureBayNumber OBJECT-TYPE 3510 SYNTAX INTEGER 3511 ACCESS read-only 3512 STATUS optional 3513 DESCRIPTION 3514 "This value specifies the enclosure bay number occupied by the blade. 3515 In case of a blade occupying multiple bays, this will be the lowest 3516 enclosure bay number of all the bay numbers occupied by this balde" 3517 ::= { cpqSiServerBlade 1 } 3518 3519 cpqSiServerBladeHeight OBJECT-TYPE 3520 SYNTAX INTEGER { 3521 unknown(1), 3522 halfHeightBlade(2), 3523 fullHeightBlade(3) 3524 } 3525 ACCESS read-only 3526 STATUS optional 3527 DESCRIPTION 3528 "Blade height is the Blade length. 3529 3530 unknown(1) 3531 This indicates it could not be determined. 3532 3533 halfHeightBlade(2) 3534 This indicates a half-height server Blade. 3535 3536 fullHeightBlade(3) 3537 This indicates a full-height server Blade." 3538 3539 ::= { cpqSiServerBlade 2 } 3540 3541 cpqSiServerBladeWidth OBJECT-TYPE 3542 SYNTAX INTEGER { 3543 unknown(1), 3544 singleWide(2), 3545 doubleWide(3) 3546 } 3547 ACCESS read-only 3548 STATUS optional 3549 DESCRIPTION 3550 "Width of the Blade in terms of Enclosure Bays. This pertain to the 3551 Blade side that connects to the enclosure backplane." 3552 ::= { cpqSiServerBlade 3 } 3553 3554-- **************************************************************************** 3555-- System Information Rack Group 3556-- =========================================== 3557-- 3558-- The compaq enterprise (1.3.6.1.4.1.232) 3559-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 3560-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 3561-- cpqSiRack Group (1.3.6.1.4.1.232.2.2.15) 3562-- 3563-- The cpqSiRack group describes the rack details. 3564-- 3565-- **************************************************************************** 3566 3567 cpqSiRackName OBJECT-TYPE 3568 SYNTAX DisplayString 3569 ACCESS read-only 3570 STATUS optional 3571 DESCRIPTION 3572 "The rack name. This name is used to logically group together 3573 enclosures in a rack and it is shared with other enclosures 3574 in the rack. 3575 The string will be empty if it could not be determined." 3576 ::= { cpqSiRack 1 } 3577 3578 cpqSiRackUUID OBJECT-TYPE 3579 SYNTAX DisplayString 3580 ACCESS read-only 3581 STATUS optional 3582 DESCRIPTION 3583 "The rack unique identifier. The string will be empty 3584 if it could be determined." 3585 ::= { cpqSiRack 2 } 3586 3587-- **************************************************************************** 3588-- System Information MP Group 3589-- ============================== 3590-- 3591-- The compaq enterprise (1.3.6.1.4.1.232) 3592-- cpqSystemInfo Group (1.3.6.1.4.1.232.2) 3593-- cpqSiComponent Group (1.3.6.1.4.1.232.2.2) 3594-- cpqSiMP Group (1.3.6.1.4.1.232.2.2.16) 3595-- 3596-- The cpqSiMP group contains information about the Management Processor. 3597-- 3598-- **************************************************************************** 3599 3600 cpqSiMPHostName OBJECT-TYPE 3601 SYNTAX DisplayString 3602 ACCESS read-only 3603 STATUS optional 3604 DESCRIPTION 3605 "The host name of the Management Processor. 3606 The string will be empty if it could not be determined." 3607 ::= { cpqSiMP 1 } 3608 3609 cpqSiMPHealthStatus OBJECT-TYPE 3610 SYNTAX INTEGER { 3611 unknown(1), 3612 ok(2), 3613 degraded(3), 3614 failed(4) 3615 } 3616 ACCESS read-only 3617 STATUS optional 3618 DESCRIPTION 3619 "The health status of the Management Processor." 3620 ::= { cpqSiMP 2 } 3621 3622-- **************************************************************************** 3623-- System Info MIB Trap Definitions 3624-- ================================ 3625-- 3626-- The SNMP trap messages must not be bigger than 484 octets (bytes). 3627-- 3628-- Trap support in an SNMP agent implementation is optional. An SNMP 3629-- agent implementation may support all, some, or none of the traps. 3630-- If traps are supported, The user should be provided with the option of 3631-- disabling traps. 3632-- ************************************************************************** 3633 3634 cpqSiHoodRemoved TRAP-TYPE 3635 ENTERPRISE compaq 3636 VARIABLES { sysName, cpqHoTrapFlags } 3637 DESCRIPTION 3638 "System hood is removed. 3639 3640 The hood status has been set to removed. The 3641 system's hood is not in a properly installed state. This 3642 situation may result in improper cooling of the system due 3643 to air flow changes caused by the missing hood. 3644 3645 User Action: Replace the cover (hood), ensure the system's cover 3646 is properly installed. Verify the system is in working order." 3647 3648 --#TYPE "System hood is removed (2001)" 3649 --#SUMMARY "Hood is removed from unit." 3650 --#ARGUMENTS {} 3651 --#SEVERITY MAJOR 3652 --#TIMEINDEX 99 3653 --#STATE DEGRADED 3654 --#SIMPLE_SEVERITY MAJOR 3655 --#HWSTATUS_CATEGORY NONE 3656 --#ACTION "Replace the cover, ensuring it is properly installed. Verify the system is in working order." 3657 3658 ::= 2001 3659 3660 cpqSiMonitorConditionOK TRAP-TYPE 3661 ENTERPRISE compaq 3662 VARIABLES { sysName, cpqHoTrapFlags, cpqSiMonitorIndex } 3663 DESCRIPTION 3664 "Fault reporting features have returned to within their normal 3665 operating range for the monitor indicated by cpqSiMonitorIndex. 3666 The monitor's condition has been set to OK. 3667 3668 User Action: None." 3669 3670 --#TYPE "Monitor Condition OK (2002)" 3671 --#SUMMARY "The monitor's condition has been set to OK." 3672 --#ARGUMENTS {} 3673 --#SEVERITY INFORMATIONAL 3674 --#TIMEINDEX 99 3675 --#STATE OPERATIONAL 3676 --#SIMPLE_SEVERITY OK 3677 --#HWSTATUS_CATEGORY NONE 3678 ::= 2002 3679 3680 3681 cpqSiMonitorConditionDegraded TRAP-TYPE 3682 ENTERPRISE compaq 3683 VARIABLES { sysName, cpqHoTrapFlags, cpqSiMonitorIndex } 3684 DESCRIPTION 3685 "A fault reporting feature has exceeded normal limits for 3686 the monitor indicated by the cpqSiMonitorIndex. The monitor's 3687 condition is degraded due to the internal temperature exceeding 3688 normal operating limits. The monitor is still useable, but 3689 action should be taken to return the condition to OK. 3690 3691 User Action: Physically check for obstructions to air flow around 3692 the monitor. Check the thermostat in the room that the system 3693 occupies. Allow the monitor to cool by turning off the monitor 3694 for 5 minutes then turn the monitor back on. After the monitor 3695 cools, another alarm indicating an improving condition, such as 3696 Monitor OK, will be issued." 3697 3698 --#TYPE "Monitor Condition Degraded (2003)" 3699 --#SUMMARY "The monitor's condition has been set to degraded." 3700 --#ARGUMENTS {} 3701 --#SEVERITY MINOR 3702 --#TIMEINDEX 99 3703 --#STATE DEGRADED 3704 --#SIMPLE_SEVERITY MAJOR 3705 --#HWSTATUS_CATEGORY NONE 3706 3707 ::= 2003 3708 3709 cpqSiMonitorConditionFailed TRAP-TYPE 3710 ENTERPRISE compaq 3711 VARIABLES { sysName, cpqHoTrapFlags, cpqSiMonitorIndex } 3712 DESCRIPTION 3713 "A fault reporting feature has exceeded normal limits in the 3714 monitor indicated by the cpqSiMonitorIndex. The monitor's 3715 condition has been set to failed due to an operational feature 3716 exceeding normal operating limits. The monitor will not be 3717 useable and should be replaced. 3718 3719 User Action: Make a note of the monitor model number and serial 3720 number. Replace the monitor. 3721 3722 Refer to the appropriate Maintenance and Service Guide for 3723 detailed information on a component replacement." 3724 3725 --#TYPE "Monitor Condition Failed (2004)" 3726 --#SUMMARY "The monitor's condition has been set to failed." 3727 --#ARGUMENTS {} 3728 --#SEVERITY CRITICAL 3729 --#TIMEINDEX 99 3730 --#STATE NONOPERATIONAL 3731 --#SIMPLE_SEVERITY CRITICAL 3732 --#HWSTATUS_CATEGORY NONE 3733 --#ACTION "Replace the failed monitor." 3734 3735 ::= 2004 3736 3737 cpqSiCorrMemErrStatusDegraded TRAP-TYPE 3738 ENTERPRISE compaq 3739 VARIABLES { sysName, cpqHoTrapFlags, cpqSiMemErrorIndex } 3740 DESCRIPTION 3741 "Correctable memory error count has exceeded the threshold for the 3742 memory module indicated by the 'cpqSiMemErrorIndex' variable. 3743 The appropriate cpqSiMemModuleECCStatus has been set to degraded. 3744 3745 User Action: For Desktops, the System Administrator should run 3746 the F10 Diagnostics on this system and select RAM LONG TEST. If 3747 it is determined that a module needs replacing, schedule 3748 maintenance for the system and replace the failed memory module. 3749 3750 Refer to the appropriate Maintenance and Service Guide for detailed 3751 information on a component replacement." 3752 3753 --#TYPE "Excessive Correctable Memory Errors (2005)" 3754 --#SUMMARY "The memory module %d ECC status has been set to degraded." 3755 --#ARGUMENTS {3} 3756 --#SEVERITY MINOR 3757 --#TIMEINDEX 99 3758 --#STATE DEGRADED 3759 --#SIMPLE_SEVERITY MAJOR 3760 --#HWSTATUS_CATEGORY MEMORY 3761 --#ACTION "Schedule maintenance for the system and replace the failing memory module." 3762 3763 ::= 2005 3764 3765 cpqSiCorrMemErrStatusOk TRAP-TYPE 3766 ENTERPRISE compaq 3767 VARIABLES { sysName, cpqHoTrapFlags, cpqSiMemErrorIndex } 3768 DESCRIPTION 3769 "Correctable memory error count is now below the threshold for the 3770 memory module indicated by the 'cpqSiMemErrorIndex' variable. The 3771 appropriate cpqSiMemModuleECCStatus has been set to ok. 3772 3773 User Action: None." 3774 3775 --#TYPE "Correctable Memory Errors Count OK (2006)" 3776 --#SUMMARY "The memory module %d ECC status has been set to ok." 3777 --#ARGUMENTS {3} 3778 --#SEVERITY INFORMATIONAL 3779 --#TIMEINDEX 99 3780 --#STATE OPERATIONAL 3781 --#SIMPLE_SEVERITY OK 3782 --#HWSTATUS_CATEGORY MEMORY 3783 3784 ::= 2006 3785 3786 cpqSiMemConfigChange TRAP-TYPE 3787 ENTERPRISE compaq 3788 VARIABLES { sysName, cpqHoTrapFlags, cpqSiMemConfigChangeData } 3789 DESCRIPTION 3790 "A memory configuration change has occurred. CpqSiMemConfigChangeData 3791 will indicate which memory modules slots have changed. 3792 3793 User Action: You may want to verify a valid reason for a memory 3794 configuration to have occurred. If system issuing the alert is 3795 a Desktop running NT, the memory configuration change information 3796 is also logged in the NT System Log." 3797 3798 --#TYPE "Memory modules have changed (2007)" 3799 --#SUMMARY "The system's memory configuration has changed." 3800 --#ARGUMENTS {} 3801 --#SEVERITY INFORMATIONAL 3802 --#TIMEINDEX 99 3803 --#STATE OPERATIONAL 3804 --#SIMPLE_SEVERITY OK 3805 --#HWSTATUS_CATEGORY MEMORY 3806 ::= 2007 3807 3808 cpqSiHotPlugSlotBoardRemoved TRAP-TYPE 3809 ENTERPRISE compaq 3810 VARIABLES { sysName, cpqHoTrapFlags, cpqSiHotPlugSlotChassis, 3811 cpqSiHotPlugSlotIndex } 3812 DESCRIPTION 3813 "Hot Plug Slot Board Removed. 3814 3815 A Hot Plug Slot Board has been removed from the specified 3816 chassis and slot. 3817 3818 User Action: None." 3819 3820 --#TYPE "Hot Plug Slot Board Removed (2008)" 3821 --#SUMMARY "Hot plug slot board removed from chassis %d, slot %d." 3822 --#ARGUMENTS {2, 3} 3823 --#SEVERITY INFORMATIONAL 3824 --#TIMEINDEX 99 3825 --#STATE OPERATIONAL 3826 --#SIMPLE_SEVERITY OK 3827 --#HWSTATUS_CATEGORY NONE 3828 --#LIFECYCLE 3829 3830 ::= 2008 3831 3832 cpqSiHotPlugSlotBoardInserted TRAP-TYPE 3833 ENTERPRISE compaq 3834 VARIABLES { sysName, cpqHoTrapFlags, cpqSiHotPlugSlotChassis, 3835 cpqSiHotPlugSlotIndex } 3836 DESCRIPTION 3837 "Hot Plug Slot Board Inserted. 3838 3839 A Hot Plug Slot Board has been inserted into the specified 3840 chassis and slot. 3841 3842 User Action: None." 3843 3844 --#TYPE "Hot Plug Slot Board Inserted (2009)" 3845 --#SUMMARY "Hot plug slot board inserted into chassis %d, slot %d." 3846 --#ARGUMENTS {2, 3} 3847 --#SEVERITY INFORMATIONAL 3848 --#TIMEINDEX 99 3849 --#STATE OPERATIONAL 3850 --#SIMPLE_SEVERITY OK 3851 --#HWSTATUS_CATEGORY NONE 3852 --#LIFECYCLE 3853 3854 ::= 2009 3855 3856 cpqSiHotPlugSlotPowerUpFailed TRAP-TYPE 3857 ENTERPRISE compaq 3858 VARIABLES { sysName, cpqHoTrapFlags, cpqSiHotPlugSlotChassis, 3859 cpqSiHotPlugSlotIndex, cpqSiHotPlugSlotErrorStatus } 3860 DESCRIPTION 3861 "Hot Plug Slot Board Failed Power-Up. 3862 3863 A Hot Plug Slot Board has failed to power-up in the specified 3864 chassis and slot. 3865 3866 User Action: Insure the board and all cables are installed 3867 correctly and the board type and revision are the same as 3868 the replaced board." 3869 3870 --#TYPE "Hot Plug Slot Board Failed (2010)" 3871 --#SUMMARY "Hot plug slot board failed in chassis %d, slot %d, error %d." 3872 --#ARGUMENTS {2, 3, 4} 3873 --#SEVERITY CRITICAL 3874 --#TIMEINDEX 99 3875 --#STATE FAILED 3876 --#SIMPLE_SEVERITY CRITICAL 3877 --#HWSTATUS_CATEGORY NONE 3878 --#ACTION "Ensure the board and all cables are installed correctly and that the board type and revision are the same as the replaced board." 3879 3880 ::= 2010 3881 3882 cpqSiSysBatteryFailure TRAP-TYPE 3883 ENTERPRISE compaq 3884 VARIABLES { sysName, cpqHoTrapFlags, cpqSiSysBatteryIndex, 3885 cpqSiSysBatterySerialNum } 3886 DESCRIPTION 3887 "The battery indicated by cpqSiSysBatteryIndex has failed 3888 and must be replaced. 3889 3890 User Action: Contact your System Administrator or 3891 Authorized Reseller to order a replacement battery. 3892 Recycle your old battery. For proper disposal information, 3893 refer to the documentation that came with your computer." 3894 3895 --#TYPE "Battery Failure (2011)" 3896 --#SUMMARY "Battery %d has failed." 3897 --#ARGUMENTS {2} 3898 --#SEVERITY MAJOR 3899 --#TIMEINDEX 99 3900 --#STATE DEGRADED 3901 --#SIMPLE_SEVERITY MAJOR 3902 --#HWSTATUS_CATEGORY NONE 3903 --#ACTION "Replace the failed battery." 3904 3905 ::= 2011 3906 3907 cpqSiSysBatteryChargingDegraded TRAP-TYPE 3908 ENTERPRISE compaq 3909 VARIABLES { sysName, cpqHoTrapFlags, cpqSiSysBatteryIndex, 3910 cpqSiSysBatterySerialNum } 3911 DESCRIPTION 3912 "Significant battery degradation has occurred with battery 3913 indicated by cpqSiSysBatteryIndex. The battery can 3914 no longer be fully recharged. 3915 3916 User Action: If using multiple batteries, run 3917 the Power Conservation Utility to identify the 3918 battery location. Contact your System Administrator 3919 or Authorized Reseller to order a replacement 3920 battery." 3921 3922 --#TYPE "Battery Charging Degradation (2012)" 3923 --#SUMMARY "Battery %d has degraded charging capacity." 3924 --#ARGUMENTS {2} 3925 --#SEVERITY MAJOR 3926 --#TIMEINDEX 99 3927 --#STATE DEGRADED 3928 --#SIMPLE_SEVERITY MAJOR 3929 --#HWSTATUS_CATEGORY NONE 3930 --#ACTION "Replace the failing battery." 3931 ::= 2012 3932 3933 3934 cpqSiSysBatteryCalibrationError TRAP-TYPE 3935 ENTERPRISE compaq 3936 VARIABLES { sysName, cpqHoTrapFlags, cpqSiSysBatteryIndex, 3937 cpqSiSysBatterySerialNum } 3938 DESCRIPTION 3939 "Calibration is needed with battery 3940 indicated by cpqSiSysBatteryIndex. The battery can 3941 not correctly indicate capacity. 3942 3943 User Action: Run the Power Conservation Utility. Contact 3944 your System Administrator or Authorized Reseller to 3945 order a replacement battery." 3946 3947 --#TYPE "Battery Calibration Error (2013)" 3948 --#SUMMARY "Battery %d has calibration error." 3949 --#ARGUMENTS {2} 3950 --#SEVERITY MAJOR 3951 --#TIMEINDEX 99 3952 --#STATE DEGRADED 3953 --#SIMPLE_SEVERITY MAJOR 3954 --#HWSTATUS_CATEGORY NONE 3955 --#ACTION "Replace the failing battery." 3956 ::= 2013 3957 3958END 3959