1--********************************************************************
2-- CISCO-DMN-DSG-SYSTEMTOOL.mib: Mib file for System Tool Information.
3--
4-- August 2010, Hemant Kumar R
5--
6--
7-- Copyright (c) 1999-2010 by Cisco Systems, Inc.
8-- All rights reserved.
9--*********************************************************************
10
11CISCO-DMN-DSG-SYSTEMTOOL-MIB
12
13DEFINITIONS ::= BEGIN
14
15    IMPORTS
16    OBJECT-TYPE,
17    MODULE-IDENTITY
18    FROM SNMPv2-SMI
19    OBJECT-GROUP, MODULE-COMPLIANCE
20    FROM SNMPv2-CONF
21    ciscoDSGUtilities
22    FROM CISCO-DMN-DSG-ROOT-MIB;
23
24    ciscoDSGSystemTool  MODULE-IDENTITY
25    LAST-UPDATED    "201008030900Z" -- August 03 2010 09:00:00 GMT
26    ORGANIZATION    "Cisco Systems, Inc."
27    CONTACT-INFO
28    "Cisco Systems, Inc.
29            Customer Service
30            Postal: 170 W Tasman Drive
31            San Jose, CA 95134
32            USA
33            Tel: +1 800 553 NETS
34
35            E-mail: cs-ipsla@cisco.com"
36    DESCRIPTION     "Cisco DSG System Tool MIB."
37
38    REVISION        "201008030900Z"
39    DESCRIPTION     "V01.00.01 2010-08-03
40                    Item systemToolClearLogs is added."
41
42    REVISION        "200912201500Z"
43    DESCRIPTION     "V01.00.00 2009-12-20
44                    Initial Version."
45
46    ::= { ciscoDSGUtilities 8 }
47
48systemTool           OBJECT IDENTIFIER ::= { ciscoDSGSystemTool 1 }
49
50--*********************************
51-- System Tool Branch
52--*********************************
53
54systemToolBanner  OBJECT-TYPE
55    SYNTAX  INTEGER {
56                disable(1),
57                enable(2)
58            }
59    MAX-ACCESS  read-write
60    STATUS current
61    DESCRIPTION
62        "Enable / Disable OSD Banner Messages."
63    ::= { systemTool 1 }
64
65systemToolReboot  OBJECT-TYPE
66    SYNTAX  INTEGER {
67                writeOnly(1),
68                yes(2)
69            }
70    MAX-ACCESS  read-write
71    STATUS current
72    DESCRIPTION
73        "Setting yes(2) reboots the system."
74    ::= { systemTool 2 }
75
76systemToolFactoryReset  OBJECT-TYPE
77    SYNTAX  INTEGER {
78                writeOnly(1),
79                yes(2)
80            }
81    MAX-ACCESS  read-write
82    STATUS current
83    DESCRIPTION
84        "Setting yes( 2 ) performs factory reset of the system."
85    ::= { systemTool 3 }
86
87systemToolCleanUnusedTables  OBJECT-TYPE
88    SYNTAX  INTEGER {
89                writeOnly(1),
90                yes(2)
91            }
92    MAX-ACCESS  read-write
93    STATUS current
94    DESCRIPTION
95        "Set this object to yes( 2 ) to clean up memory of parameters
96        unused by this version."
97    ::= { systemTool 4 }
98
99systemToolCAMode  OBJECT-TYPE
100    SYNTAX INTEGER {
101                standard(1),
102                open(2)
103            }
104    MAX-ACCESS  read-write
105    STATUS  current
106    DESCRIPTION
107        "Custom Tuning Mode: Conditional Access Mode: Standard/ Open."
108    ::= { systemTool 5 }
109
110systemToolClearLogs  OBJECT-TYPE
111    SYNTAX INTEGER {
112                writeOnly(1),
113                yes(2)
114            }
115    MAX-ACCESS  read-write
116    STATUS  current
117    DESCRIPTION
118        "Set this object to yes( 2 ) to clean up memory of logs."
119    ::= { systemTool 6 }
120
121END
122