1-- *********************************************************************
2-- CISCO-SYSTEM-EXT-MIB.my: System Extension MIB
3--
4-- October 2002, Vinay Gaonkar
5-- Copyright (c) 2002, 2003, 2005-2007-2016 by cisco Systems Inc.
6-- All rights reserved.
7--
8-- ********************************************************************
9
10CISCO-SYSTEM-EXT-MIB DEFINITIONS ::= BEGIN
11
12IMPORTS
13    MODULE-IDENTITY,
14    OBJECT-TYPE,
15    NOTIFICATION-TYPE,
16    Unsigned32,
17    Gauge32
18        FROM SNMPv2-SMI
19    MODULE-COMPLIANCE,
20    OBJECT-GROUP,
21    NOTIFICATION-GROUP
22        FROM SNMPv2-CONF
23    TEXTUAL-CONVENTION,
24    TruthValue,
25    DateAndTime
26        FROM SNMPv2-TC
27    SnmpAdminString
28        FROM SNMP-FRAMEWORK-MIB
29    InetAddressType,
30    InetAddress
31        FROM INET-ADDRESS-MIB
32    sysName
33        FROM SNMPv2-MIB
34    EntPhysicalIndexOrZero,
35    TimeIntervalSec
36        FROM CISCO-TC
37    ciscoMgmt
38        FROM CISCO-SMI;
39
40
41ciscoSystemExtMIB MODULE-IDENTITY
42    LAST-UPDATED    "201606140000Z"
43    ORGANIZATION    "Cisco Systems Inc."
44    CONTACT-INFO
45            "Cisco Systems
46            Customer Service
47            Postal: 170 W Tasman Drive
48            San Jose, CA  95134
49            USA
50            Tel: +1 800 553 -NETS
51            E-mail: cs-san@cisco.com"
52    DESCRIPTION
53        "MIB module for monitoring High Availability, SNMP SET
54        errors and bandwidths.  This mib module also provides the
55        information on core files that are generated in the
56        system.
57        GLOSSARY
58        FIPS Federal Information Processing Standards Publication."
59    REVISION        "201607190000Z"
60    DESCRIPTION
61        "Added support for ciscoSysReloadGroup."
62    REVISION        "201606070000Z"
63    DESCRIPTION
64        "Added cseMaintModeState object.
65        Added new notifications cseNormalModeChangeNotify and
66        cseMaintModeChangeNotify.
67        Added new group ciscoSystemMaintModeGroup.
68        Added new objects ciscoSystemNormalModeNotifEnable and
69        ciscoSystemMaintModeNotifEnable.
70        Added new group ciscoSystemMaintModeNotifControl.
71        Added compilance ciscoSystemExtMIBComplianceRev10 to replace
72        ciscoSystemExtMIBComplianceRev9.
73        Added object group ciscoSystemMaintModeObjectsGroup and
74        notification group ciscoSystemMaintModeNotificationGroup."
75    REVISION        "201508190000Z"
76    DESCRIPTION
77        "Added support for ciscoSystemSwitchingModeObjectsGroup."
78    REVISION        "200708060000Z"
79    DESCRIPTION
80        "-Added a scalar object 'cseSysUpTime'
81        -Added an Object Group ciscoSystemExtInfoGroupRev3 and
82         a MODULE-COMPLIANCE ciscoSystemExtMIBComplianceRev8
83         to include the new object."
84    REVISION        "200611290000Z"
85    DESCRIPTION
86        "Added ciscoSystemExtInfoFIPSGroup.
87        Added a new object cseSysFIPSModeActivation."
88    REVISION        "200609250000Z"
89    DESCRIPTION
90        "-Added cseSwCoresFileName in cseSwCoresTable.
91        -Added new notification cseFailSwCoreNotifyExtended.
92        -Added new group ciscoSystemExtSwFailureGroup3.
93        -Added new group ciscoSystemExtNotificationGroupSup2.
94        -Added compliance ciscoSystemExtMIBComplianceRev6 to
95         replace ciscoSystemExtMIBComplianceRev5.
96        -Added new group ciscoSystemExtSwFailureControlGroup.
97        -Added new ciscoSwFailureNotifEnable object."
98    REVISION        "200511090000Z"
99    DESCRIPTION
100        "Added a new group ciscoSystemExtInfoTelnetGroup.
101        Added a new object cseSysTelnetServiceActivation."
102    REVISION        "200506140000Z"
103    DESCRIPTION
104        "Updated CseHaRestartReason
105        Added a new table cseSwCoresTable.
106        Added notifications - cseFailSwCoreNotify
107                            - cseShutDownNotify
108        Added a new group ciscoSystemExtSwFailureGroup2.
109        Added a new group ciscoSystemExtNotificationGroup1.
110
111        Added a new object cseSysConsolePortStatus.
112        Added a new group ciscoSystemExtInfoGroupRev2.
113        Added a new compliance group
114                ciscoSystemExtMIBComplianceRev4."
115    REVISION        "200404190000Z"
116    DESCRIPTION
117        "Added a new object cseSwCorePath."
118    REVISION        "200305020000Z"
119    DESCRIPTION
120        "Added a new object cseWriteErase.
121        Added a new group ciscoSystemExtInfoGroupOptional.
122        A new compliance ciscoSystemExtMIBComplianceRev2
123        added to replace ciscoSystemExtMIBComplianceRev1."
124    REVISION        "200303020000Z"
125    DESCRIPTION
126        "Added cseSysAutoSync and cseSysAutoSyncState."
127    REVISION        "200211190000Z"
128    DESCRIPTION
129        "Added cseSysConfLastChange."
130    REVISION        "200210040000Z"
131    DESCRIPTION
132        "Initial version of this MIB module."
133    ::= { ciscoMgmt 305 }
134
135
136ciscoSystemExtMIBNotifsPrefix  OBJECT IDENTIFIER
137    ::= { ciscoSystemExtMIB 0 }
138
139ciscoSystemExtMIBObjects  OBJECT IDENTIFIER
140    ::= { ciscoSystemExtMIB 1 }
141
142ciscoSystemExtMIBConformance  OBJECT IDENTIFIER
143    ::= { ciscoSystemExtMIB 2 }
144
145ciscoSysInfoGroup  OBJECT IDENTIFIER
146    ::= { ciscoSystemExtMIBObjects 1 }
147
148ciscoSysErrorGroup  OBJECT IDENTIFIER
149    ::= { ciscoSystemExtMIBObjects 2 }
150
151ciscoHaGroup  OBJECT IDENTIFIER
152    ::= { ciscoSystemExtMIBObjects 3 }
153
154ciscoSwFailureGroup  OBJECT IDENTIFIER
155    ::= { ciscoSystemExtMIBObjects 4 }
156
157ciscoSwFailureNotifControl  OBJECT IDENTIFIER
158    ::= { ciscoSystemExtMIBObjects 5 }
159
160ciscoSystemSwitchingModeGroup  OBJECT IDENTIFIER
161    ::= { ciscoSystemExtMIBObjects 6 }
162
163ciscoSystemMaintModeGroup  OBJECT IDENTIFIER
164    ::= { ciscoSystemExtMIBObjects 7 }
165
166ciscoSystemMaintModeNotifControl  OBJECT IDENTIFIER
167    ::= { ciscoSystemExtMIBObjects 8 }
168
169ciscoSystemReloadGroup  OBJECT IDENTIFIER
170    ::= { ciscoSystemExtMIBObjects 9 }
171
172
173-- Textual Conventions
174
175CseHaRestartReason ::= TEXTUAL-CONVENTION
176    STATUS          current
177    DESCRIPTION
178        "Reason codes for the restart of a service.
179        unknown (1)           - ungraceful exit
180        ungracefulExit (2)    - ungraceful exit
181        otherSignal (3)       - service got some other signal
182        sigterm (4)           - received SIGTERM
183        softwareUpgrade (5)   - software upgrade
184        configUpdate (6)      - config update
185        configRemove (7)      - config removal
186        shutdown (8)          - manually shutdown
187        aborted (9)           - aborted
188        heartbeatFailure (10) - heartbeat failure
189        userTerminate (11)    - user termination
190        gracefulExit (12)     - graceful exit
191        failureNoCallhome (13)- service exited but it
192                                does not want a callhome
193                                message to be generated
194        serviceTimeout (14)   - service timeout"
195    SYNTAX          INTEGER  {
196                        unknown(1),
197                        ungracefulExit(2),
198                        otherSignal(3),
199                        sigterm(4),
200                        softwareUpgrade(5),
201                        configUpdate(6),
202                        configRemove(7),
203                        shutdown(8),
204                        aborted(9),
205                        heartbeatFailure(10),
206                        userTerminate(11),
207                        gracefulExit(12),
208                        noCallHomeFailure(13),
209                        serviceTimeout(14)
210                    }
211
212CiscoMaintModeState ::= TEXTUAL-CONVENTION
213    STATUS          current
214    DESCRIPTION
215        "Maintenance Mode state for the system.
216        normal (1)            - normal operational state
217        maintenance (2)       - maintenance mode operational state
218        unplannedMaint (3)    - unplanned maintenance state"
219    SYNTAX          INTEGER  {
220                        normal(1),
221                        maintenance(2),
222                        unplannedMaint(3)
223                    }
224
225-- System Information Group
226
227cseSysCPUUtilization OBJECT-TYPE
228    SYNTAX          Gauge32 (0..100)
229    UNITS           "%"
230    MAX-ACCESS      read-only
231    STATUS          current
232    DESCRIPTION
233        "The average utilization of CPU on the active
234        supervisor."
235    ::= { ciscoSysInfoGroup 1 }
236
237-- Memory utilization
238
239cseSysMemoryUtilization OBJECT-TYPE
240    SYNTAX          Gauge32 (0..100)
241    UNITS           "%"
242    MAX-ACCESS      read-only
243    STATUS          current
244    DESCRIPTION
245        "The average utilization of memory on the active
246        supervisor."
247    ::= { ciscoSysInfoGroup 2 }
248
249cseSysConfLastChange OBJECT-TYPE
250    SYNTAX          DateAndTime
251    MAX-ACCESS      read-only
252    STATUS          current
253    DESCRIPTION
254        "The local date and time when the
255        configuration was last changed. This object will
256        be set to zero on power cycle or on reboot of
257        the system. Also, if the clock is changed on
258        local system it is set to zero."
259    ::= { ciscoSysInfoGroup 3 }
260
261cseSysAutoSync OBJECT-TYPE
262    SYNTAX          INTEGER  {
263                        sync(1),
264                        noSync(2)
265                    }
266    MAX-ACCESS      read-write
267    STATUS          current
268    DESCRIPTION
269        "The state of the auto synchronization of images
270        between the active and standby supervisor.
271        Setting the value to sync when the existing value
272        is sync, has no effect on the operation."
273    DEFVAL          { noSync }
274    ::= { ciscoSysInfoGroup 4 }
275
276cseSysAutoSyncState OBJECT-TYPE
277    SYNTAX          INTEGER  {
278                        inProgress(1),
279                        succeeded(2),
280                        failed(3),
281                        notStarted(4)
282                    }
283    MAX-ACCESS      read-only
284    STATUS          current
285    DESCRIPTION
286        "The status of the current auto synchronization
287        process, or if no such process is in progress,
288        then the state of the most recent one.  The
289        value 'notStarted' indicates no auto synchronization
290        process has occurred recently."
291    ::= { ciscoSysInfoGroup 5 }
292
293cseWriteErase OBJECT-TYPE
294    SYNTAX          INTEGER  {
295                        noOp(1),
296                        eraseAll(2)
297                    }
298    MAX-ACCESS      read-write
299    STATUS          current
300    DESCRIPTION
301        "This object is used to initiate a write erase on the
302        device's saved configuration file(s) from which the
303        device loads its configuration when it restarts.
304
305        If the value of this object is set to 'eraseAll', then
306        all the saved configurations are removed.
307
308        No action is taken when the this object is set to
309        'noOp'.
310        When read, the value of this object is always 'noOp'."
311    ::= { ciscoSysInfoGroup 6 }
312
313cseSysConsolePortStatus OBJECT-TYPE
314    SYNTAX          INTEGER  {
315                        connected(1),
316                        notConnected(2)
317                    }
318    MAX-ACCESS      read-only
319    STATUS          current
320    DESCRIPTION
321        "This object describes the status of the console
322        port on this device.
323
324        The status 'connected' means that there is
325        a cable attached to the console port.
326
327        The status 'notConnected' means that there is
328        no connection out of the console port."
329    ::= { ciscoSysInfoGroup 7 }
330
331cseSysTelnetServiceActivation OBJECT-TYPE
332    SYNTAX          TruthValue
333    MAX-ACCESS      read-write
334    STATUS          current
335    DESCRIPTION
336        "Enables or disables the Telnet service on the
337        device. In other words, it enables or disables
338        the telneting to the device."
339    DEFVAL          { true }
340    ::= { ciscoSysInfoGroup 8 }
341
342cseSysFIPSModeActivation OBJECT-TYPE
343    SYNTAX          TruthValue
344    MAX-ACCESS      read-write
345    STATUS          current
346    DESCRIPTION
347        "The object to enable/disable FIPS mode  on the device.
348        FIPS 140-2 is a set of security requirements for cryptographic
349        modules and it details the U.S. Government requirements for
350        cryptographic modules.
351        A module will comprise both hardware and software, eg a
352        datacenter  switching or routing module. The module is said to
353        be in FIPS enabled mode when a request is recieved to enable the
354        FIPS mode and a set of self-tests are successfully run in
355        response to the request. If the self-tests fail, then an
356        appropriate error is returned."
357    REFERENCE
358        "FIPS PUB 140-2 Security Requirements for Cryptographic
359               Modules"
360    DEFVAL          { false }
361    ::= { ciscoSysInfoGroup 9 }
362
363cseSysUpTime OBJECT-TYPE
364    SYNTAX          TimeIntervalSec
365    UNITS           "Seconds"
366    MAX-ACCESS      read-only
367    STATUS          current
368    DESCRIPTION
369        "The time (in seconds) since the entire system
370        was last re-initialized as a result of reload. The
371        initialization being system loaded and running with a system
372        image software on the first active supervisor (SUP). In High
373        Availibility (HA) capable system / System that provides
374        Supervisor module redundancy, this uptime indicates time
375        elapsed since the first active SUP was booted. This will not
376        change even if the active SUP goes down and stand-by takes
377        over as active."
378    ::= { ciscoSysInfoGroup 10 }
379
380cseSnmpErrorTable OBJECT-TYPE
381    SYNTAX          SEQUENCE OF CseSnmpErrorEntry
382    MAX-ACCESS      not-accessible
383    STATUS          current
384    DESCRIPTION
385        "A table containing information about the errors which have
386        recently caused the generation of a SNMP Response PDU with a
387        non-zero value in its error-status field for SNMP Set Response
388        PDU.
389
390        This table serves as an extension to the SNMP's error status
391        when a SNMP Set request fails. SNMP returns only a pre-defined
392        set of standard error codes which does not convey the specific
393        cause for an error. Typically, there is an incumbent and
394        sizable burden on the configuration application to determine
395        if the configuration request failure is the result of a
396        resource issue, a security issue, or an application error
397        (like an object depending on some other objects). So from a
398        user perspective, it is important that a specific error be
399        made known.
400
401        Ideally, when a 'badValue' error occurs for a given set
402        request, an application can query the command responder for
403        more details on the error.
404
405        This table provides a framework for the command responders to
406        provide more information on the SET errors.
407
408        It is up to the implementation to create entries in this table
409        for either only certain SNMP errors or all of the SNMP errors.
410
411        Note that only most recent incarnation of an entry is kept in
412        this table."
413    ::= { ciscoSysErrorGroup 1 }
414
415cseSnmpErrorEntry OBJECT-TYPE
416    SYNTAX          CseSnmpErrorEntry
417    MAX-ACCESS      not-accessible
418    STATUS          current
419    DESCRIPTION
420        "An entry (conceptual row) in the  cseSnmpErrorTable, containing
421        information about an error which has recently caused a SNMP
422        SetRequest to fail.  An entry is created by the agent
423        on the occurrence of an error, and is deleted approximately 5
424        minutes later. The reasons for this are :
425        - to prevent old entries clogging the table.
426        - optimal utilization of the resources like memory."
427    INDEX           {
428                        cseSnmpErrorAddressType,
429                        cseSnmpErrorAddress,
430                        cseSnmpErrorRequestId
431                    }
432    ::= { cseSnmpErrorTable 1 }
433
434CseSnmpErrorEntry ::= SEQUENCE {
435        cseSnmpErrorAddressType InetAddressType,
436        cseSnmpErrorAddress     InetAddress,
437        cseSnmpErrorRequestId   Unsigned32,
438        cseSnmpErrorCode        Unsigned32,
439        cseSnmpErrorDescription SnmpAdminString
440}
441
442cseSnmpErrorAddressType OBJECT-TYPE
443    SYNTAX          InetAddressType
444    MAX-ACCESS      not-accessible
445    STATUS          current
446    DESCRIPTION
447        "The type of address from which the error-ed SetRequest
448        originated."
449    ::= { cseSnmpErrorEntry 1 }
450
451cseSnmpErrorAddress OBJECT-TYPE
452    SYNTAX          InetAddress
453    MAX-ACCESS      not-accessible
454    STATUS          current
455    DESCRIPTION
456        "The address from which the error-ed SetRequest originated."
457    ::= { cseSnmpErrorEntry 2 }
458
459cseSnmpErrorRequestId OBJECT-TYPE
460    SYNTAX          Unsigned32
461    MAX-ACCESS      not-accessible
462    STATUS          current
463    DESCRIPTION
464        "The request-id of the error-ed SetRequest."
465    ::= { cseSnmpErrorEntry 3 }
466
467cseSnmpErrorCode OBJECT-TYPE
468    SYNTAX          Unsigned32
469    MAX-ACCESS      read-only
470    STATUS          current
471    DESCRIPTION
472        "The code for the Mib object specific error which
473        caused a SetRequest to fail.
474        This error code is platform-specific and for debugging
475        purposes only. For information on this code, the
476        corresponding instance of cseSnmpErrorDescription must be
477        used.
478        This code is not the same as the value contained
479        in the error-status field of SNMP Response PDU."
480    ::= { cseSnmpErrorEntry 4 }
481
482cseSnmpErrorDescription OBJECT-TYPE
483    SYNTAX          SnmpAdminString
484    MAX-ACCESS      read-only
485    STATUS          current
486    DESCRIPTION
487        "The error description for the error happened for the
488        SetRequest."
489    ::= { cseSnmpErrorEntry 5 }
490
491
492
493-- Notification informations
494
495cseHaRestartReason OBJECT-TYPE
496    SYNTAX          CseHaRestartReason
497    MAX-ACCESS      accessible-for-notify
498    STATUS          current
499    DESCRIPTION
500        "The reason for most recent restart of a service on the
501        'active' supervisor."
502    ::= { ciscoHaGroup 2 }
503
504cseHaRestartStateless OBJECT-TYPE
505    SYNTAX          TruthValue
506    MAX-ACCESS      accessible-for-notify
507    STATUS          current
508    DESCRIPTION
509        "Tells if the most recent restart of a service on the
510        'active' supervisor was 'stateless' or not.
511         A 'stateless' restart of a service is where no runtime
512         information is preserved while restarting the service."
513    ::= { ciscoHaGroup 3 }
514
515cseHaRestartService OBJECT-TYPE
516    SYNTAX          SnmpAdminString (SIZE  (0..255))
517    MAX-ACCESS      accessible-for-notify
518    STATUS          current
519    DESCRIPTION
520        "Name of the service (or process) that was restarted on
521        the 'active' supervisor."
522    ::= { ciscoHaGroup 4 }
523
524cseHaShutDownReason OBJECT-TYPE
525    SYNTAX          SnmpAdminString (SIZE  (0..255))
526    MAX-ACCESS      accessible-for-notify
527    STATUS          current
528    DESCRIPTION
529        "The description of the reason as to why the system
530        is going to go down."
531    ::= { ciscoHaGroup 6 }
532
533-- software failure group
534
535cseSwCorePath OBJECT-TYPE
536    SYNTAX          SnmpAdminString (SIZE  (0..255))
537    MAX-ACCESS      read-only
538    STATUS          current
539    DESCRIPTION
540        "Provides the path where the software cores are
541        stored on the system. The management application can
542        use this path to copy the cores from the system using
543        CISCO-FLASH-MIB."
544    ::= { ciscoSwFailureGroup 1 }
545
546cseSwCoresTable OBJECT-TYPE
547    SYNTAX          SEQUENCE OF CseSwCoresEntry
548    MAX-ACCESS      not-accessible
549    STATUS          current
550    DESCRIPTION
551        "A table containing information about the system cores that
552        have been generated as an effect of some system failures."
553    ::= { ciscoSwFailureGroup 2 }
554
555cseSwCoresEntry OBJECT-TYPE
556    SYNTAX          CseSwCoresEntry
557    MAX-ACCESS      not-accessible
558    STATUS          current
559    DESCRIPTION
560        "An entry (conceptual row) in the  cseSwCoresTable, containing
561        information about cores that have been generated."
562    INDEX           {
563                        cseSwCoresModule,
564                        cseSwCoresProcName,
565                        cseSwCoresInstance
566                    }
567    ::= { cseSwCoresTable 1 }
568
569CseSwCoresEntry ::= SEQUENCE {
570        cseSwCoresModule      EntPhysicalIndexOrZero,
571        cseSwCoresProcName    SnmpAdminString,
572        cseSwCoresInstance    Unsigned32,
573        cseSwCoresPID         Unsigned32,
574        cseSwCoresTimeCreated DateAndTime,
575        cseSwCoresSlotNum     Unsigned32,
576        cseSwCoresFileName    SnmpAdminString
577}
578
579cseSwCoresModule OBJECT-TYPE
580    SYNTAX          EntPhysicalIndexOrZero
581    MAX-ACCESS      not-accessible
582    STATUS          current
583    DESCRIPTION
584        "The physical module on which the process crashed."
585    ::= { cseSwCoresEntry 1 }
586
587cseSwCoresProcName OBJECT-TYPE
588    SYNTAX          SnmpAdminString (SIZE  (1..64))
589    MAX-ACCESS      not-accessible
590    STATUS          current
591    DESCRIPTION
592        "The name of the process that crashed and generated core."
593    ::= { cseSwCoresEntry 2 }
594
595cseSwCoresInstance OBJECT-TYPE
596    SYNTAX          Unsigned32
597    MAX-ACCESS      not-accessible
598    STATUS          current
599    DESCRIPTION
600        "The instance of the core for a process identified by
601        cseSwCoresProcName and on the module identified by
602        cseSwCoresModule.
603
604        To uniquely identify a core, the module number and
605        process name are not sufficient as there could be
606        multiple cores for the same module number and process
607        name."
608    ::= { cseSwCoresEntry 3 }
609
610cseSwCoresPID OBJECT-TYPE
611    SYNTAX          Unsigned32
612    MAX-ACCESS      read-only
613    STATUS          current
614    DESCRIPTION
615        "The process identifier of the process that dumped the
616        core."
617    ::= { cseSwCoresEntry 4 }
618
619cseSwCoresTimeCreated OBJECT-TYPE
620    SYNTAX          DateAndTime
621    MAX-ACCESS      read-only
622    STATUS          current
623    DESCRIPTION
624        "The time at which the core was created."
625    ::= { cseSwCoresEntry 5 }
626
627cseSwCoresSlotNum OBJECT-TYPE
628    SYNTAX          Unsigned32
629    MAX-ACCESS      read-only
630    STATUS          current
631    DESCRIPTION
632        "The slot number corresponding to the cseSwCoresModule
633        in this chassis."
634    ::= { cseSwCoresEntry 6 }
635
636cseSwCoresFileName OBJECT-TYPE
637    SYNTAX          SnmpAdminString
638    MAX-ACCESS      read-only
639    STATUS          current
640    DESCRIPTION
641        "This object contains the core file-name(including the
642        path, relative to the value in the cseSwCorePath object).
643        If the cseSwCorePath contains zero length octet string,
644        then this object will contain the filename with absolute
645        path.  If this object contains zero length octet string,
646        then the core file is available in path identified in
647        cseSwCorePath."
648    ::= { cseSwCoresEntry 7 }
649
650
651
652ciscoSystemSwitchingModeAdmin OBJECT-TYPE
653    SYNTAX          INTEGER  {
654                        other(1),
655                        notApplicable(2),
656                        nexus3000(3),
657                        nexus9000(4)
658                    }
659    MAX-ACCESS      read-write
660    STATUS          current
661    DESCRIPTION
662        "Object to specify system's switching mode.
663
664        'other'         - any other state not covered by below enumerations
665        'notApplicable' - switching mode configuration is not applicable
666                          for this system
667        'nexus3000'     - system switching mode is configured as Nexus 3000
668        'nexus9000'     - system switching mode is configured as Nexus 9000."
669    ::= { ciscoSystemSwitchingModeGroup 1 }
670
671ciscoSystemSwitchingModeOper OBJECT-TYPE
672    SYNTAX          INTEGER  {
673                        other(1),
674                        notApplicable(2),
675                        nexus3000(3),
676                        nexus9000(4)
677                    }
678    MAX-ACCESS      read-only
679    STATUS          current
680    DESCRIPTION
681        "Object indicate system's operational switching mode.
682
683        'other'         - any other state not covered by below enumerations
684        'notApplicable' - switching mode configuration is not applicable
685                          for this system
686        'nexus3000'     - system is opeerating in Nexus 3000 mode
687        'nexus9000'     - system is opeerating in Nexus 9000 mode."
688    ::= { ciscoSystemSwitchingModeGroup 2 }
689
690-- System Maint Mode Group
691
692cseMaintModeState OBJECT-TYPE
693    SYNTAX          CiscoMaintModeState
694    MAX-ACCESS      read-only
695    STATUS          current
696    DESCRIPTION
697        "The maintenance mode operational state for the system."
698    ::= { ciscoSystemMaintModeGroup 1 }
699
700-- System Reload Group
701
702cseSystemReloadPending OBJECT-TYPE
703    SYNTAX          TruthValue
704    MAX-ACCESS      read-only
705    STATUS          current
706    DESCRIPTION
707        "This object is used to indicate if a system reload is needed to
708        make feature configuration change effective.
709
710        The object returns 'true' if a system reload is required; it returns
711        'false' if no system reload is required."
712    ::= { ciscoSystemReloadGroup 1 }
713
714-- Notification Control Group
715
716ciscoSwFailureNotifEnable OBJECT-TYPE
717    SYNTAX          TruthValue
718    MAX-ACCESS      read-write
719    STATUS          current
720    DESCRIPTION
721        "This object is used for administratively
722        enabling/disabling the cseFailSwCoreNotify or
723        cseFailSwCoreNotifyExtended notifications."
724    DEFVAL          { false }
725    ::= { ciscoSwFailureNotifControl 1 }
726
727ciscoSystemNormalModeNotifEnable OBJECT-TYPE
728    SYNTAX          TruthValue
729    MAX-ACCESS      read-write
730    STATUS          current
731    DESCRIPTION
732        "This object is used for administratively
733        enabling/disabling the cseNormalModeChangeNotify."
734    DEFVAL          { false }
735    ::= { ciscoSystemMaintModeNotifControl 1 }
736
737ciscoSystemMaintModeNotifEnable OBJECT-TYPE
738    SYNTAX          TruthValue
739    MAX-ACCESS      read-write
740    STATUS          current
741    DESCRIPTION
742        "This object is used for administratively
743        enabling/disabling the cseMaintModeChangeNotify."
744    DEFVAL          { false }
745    ::= { ciscoSystemMaintModeNotifControl 2 }
746-- Notifications
747--
748
749-- High Availability Notifications
750
751cseHaNotification  OBJECT IDENTIFIER
752    ::= { ciscoHaGroup 5 }
753
754cseHaNotificationPrefix  OBJECT IDENTIFIER
755    ::= { cseHaNotification 0 }
756
757
758cseHaRestartNotify NOTIFICATION-TYPE
759    OBJECTS         {
760                        cseHaRestartReason,
761                        cseHaRestartService,
762                        cseHaRestartStateless
763                    }
764    STATUS          current
765    DESCRIPTION
766        "A service restart notification is generated
767        whenever a service (or a process) on the 'active'
768        supervisor is restarted."
769   ::= { cseHaNotificationPrefix 1 }
770
771cseShutDownNotify NOTIFICATION-TYPE
772    OBJECTS         { cseHaShutDownReason }
773    STATUS          current
774    DESCRIPTION
775        "A system shutdown notification is generated
776        whenever a system is going to shut down. The
777        cseHaShutDownReason, describes the reason as to
778        why the system is going to go down."
779   ::= { cseHaNotificationPrefix 2 }
780-- Failure Group Notifications
781
782cseFailNotification  OBJECT IDENTIFIER
783    ::= { ciscoSwFailureGroup 3 }
784
785cseFailNotificationPrefix  OBJECT IDENTIFIER
786    ::= { cseFailNotification 0 }
787
788
789cseFailSwCoreNotify NOTIFICATION-TYPE
790    STATUS          current
791    DESCRIPTION
792        "A notification is generated whenever a software
793        crash occurs and a core file is generated."
794   ::= { cseFailNotificationPrefix 1 }
795
796cseFailSwCoreNotifyExtended NOTIFICATION-TYPE
797    OBJECTS         {
798                        sysName,
799                        cseSwCoresFileName,
800                        cseSwCorePath,
801                        cseSwCoresPID
802                    }
803    STATUS          current
804    DESCRIPTION
805        "A notification is generated whenever a software
806        crash occurs and a core file is generated."
807   ::= { cseFailNotificationPrefix 2 }
808-- Maint Mode Group Notifications
809
810cseMaintModeNotification  OBJECT IDENTIFIER
811    ::= { ciscoSystemMaintModeGroup 2 }
812
813cseMaintModeNotificationPrefix  OBJECT IDENTIFIER
814    ::= { cseMaintModeNotification 0 }
815
816
817cseNormalModeChangeNotify NOTIFICATION-TYPE
818    OBJECTS         { cseMaintModeState }
819    STATUS          current
820    DESCRIPTION
821        "A normal mode state change is generated when the system
822        is changed from maintenance mode to normal mode."
823   ::= { cseMaintModeNotificationPrefix 1 }
824
825cseMaintModeChangeNotify NOTIFICATION-TYPE
826    OBJECTS         { cseMaintModeState }
827    STATUS          current
828    DESCRIPTION
829        "A maintenance mode state change is generated when the system
830        is changed from normal mode to maintenance mode."
831   ::= { cseMaintModeNotificationPrefix 2 }
832-- Conformance
833
834ciscoSystemExtMIBCompliances  OBJECT IDENTIFIER
835    ::= { ciscoSystemExtMIBConformance 1 }
836
837ciscoSystemExtMIBGroups  OBJECT IDENTIFIER
838    ::= { ciscoSystemExtMIBConformance 2 }
839
840
841ciscoSystemExtMIBCompliance MODULE-COMPLIANCE
842    STATUS          deprecated
843    DESCRIPTION
844        "The compliance statement for entities which
845        implement the CISCO-SYTEM-EXT-MIB."
846    MODULE          -- this module
847    MANDATORY-GROUPS {
848                        ciscoSystemExtInfoGroup,
849                        ciscoSystemExtErrorGroup,
850                        ciscoSystemExtHaGroup,
851                        ciscoSystemExtNotificationGroup
852                    }
853    ::= { ciscoSystemExtMIBCompliances 1 }
854
855ciscoSystemExtMIBComplianceRev1 MODULE-COMPLIANCE
856    STATUS          deprecated
857    DESCRIPTION
858        "The compliance statement for entities which
859        implement the CISCO-SYTEM-EXT-MIB."
860    MODULE          -- this module
861    MANDATORY-GROUPS {
862                        ciscoSystemExtInfoGroupRev1,
863                        ciscoSystemExtErrorGroup,
864                        ciscoSystemExtHaGroup,
865                        ciscoSystemExtNotificationGroup
866                    }
867    ::= { ciscoSystemExtMIBCompliances 2 }
868
869ciscoSystemExtMIBComplianceRev2 MODULE-COMPLIANCE
870    STATUS          deprecated
871    DESCRIPTION
872        "The compliance statement for entities which
873        implement the CISCO-SYTEM-EXT-MIB."
874    MODULE          -- this module
875    MANDATORY-GROUPS {
876                        ciscoSystemExtInfoGroupRev1,
877                        ciscoSystemExtErrorGroup,
878                        ciscoSystemExtHaGroup,
879                        ciscoSystemExtNotificationGroup
880                    }
881
882    GROUP           ciscoSystemExtInfoGroupOptional
883    DESCRIPTION
884        "Implementation of this group is optional."
885    ::= { ciscoSystemExtMIBCompliances 3 }
886
887ciscoSystemExtMIBComplianceRev3 MODULE-COMPLIANCE
888    STATUS          deprecated
889    DESCRIPTION
890        "The compliance statement for entities which
891        implement the CISCO-SYTEM-EXT-MIB."
892    MODULE          -- this module
893    MANDATORY-GROUPS {
894                        ciscoSystemExtInfoGroupRev1,
895                        ciscoSystemExtErrorGroup,
896                        ciscoSystemExtHaGroup,
897                        ciscoSystemExtNotificationGroup
898                    }
899
900    GROUP           ciscoSystemExtInfoGroupOptional
901    DESCRIPTION
902        "Implementation of this group is optional."
903
904    GROUP           ciscoSystemExtSwFailureGroup
905    DESCRIPTION
906        "Implementation of this group is optional."
907    ::= { ciscoSystemExtMIBCompliances 4 }
908
909ciscoSystemExtMIBComplianceRev4 MODULE-COMPLIANCE
910    STATUS          deprecated
911    DESCRIPTION
912        "The compliance statement for entities which
913        implement the CISCO-SYTEM-EXT-MIB."
914    MODULE          -- this module
915    MANDATORY-GROUPS {
916                        ciscoSystemExtInfoGroupRev1,
917                        ciscoSystemExtInfoGroupRev2,
918                        ciscoSystemExtErrorGroup,
919                        ciscoSystemExtHaGroup,
920                        ciscoSystemExtNotificationGroup,
921                        ciscoSystemExtNotificationGroupSup1,
922                        ciscoSystemExtHaGroupRev1
923                    }
924
925    GROUP           ciscoSystemExtInfoGroupOptional
926    DESCRIPTION
927        "Implementation of this group is optional."
928
929    GROUP           ciscoSystemExtSwFailureGroup
930    DESCRIPTION
931        "Implementation of this group is optional."
932    ::= { ciscoSystemExtMIBCompliances 5 }
933
934ciscoSystemExtMIBComplianceRev5 MODULE-COMPLIANCE
935    STATUS          deprecated
936    DESCRIPTION
937        "The compliance statement for entities which
938        implement the CISCO-SYTEM-EXT-MIB."
939    MODULE          -- this module
940    MANDATORY-GROUPS {
941                        ciscoSystemExtInfoGroupRev1,
942                        ciscoSystemExtInfoGroupRev2,
943                        ciscoSystemExtErrorGroup,
944                        ciscoSystemExtHaGroup,
945                        ciscoSystemExtNotificationGroup,
946                        ciscoSystemExtNotificationGroupSup1,
947                        ciscoSystemExtHaGroupRev1
948                    }
949
950    GROUP           ciscoSystemExtInfoGroupOptional
951    DESCRIPTION
952        "Implementation of this group is optional."
953
954    GROUP           ciscoSystemExtSwFailureGroup
955    DESCRIPTION
956        "Implementation of this group is optional."
957
958    GROUP           ciscoSystemExtSwFailureGroup2
959    DESCRIPTION
960        "Implementation of this group is optional."
961
962    GROUP           ciscoSystemExtInfoTelnetGroup
963    DESCRIPTION
964        "Implementation of this group is mandatory if the
965        support of telnet device can be enabled/disabled
966        by the system."
967    ::= { ciscoSystemExtMIBCompliances 6 }
968
969ciscoSystemExtMIBComplianceRev6 MODULE-COMPLIANCE
970    STATUS          deprecated
971    DESCRIPTION
972        "The compliance statement for entities which implement the
973        CISCO-SYTEM-EXT-MIB."
974    MODULE          -- this module
975    MANDATORY-GROUPS {
976                        ciscoSystemExtInfoGroupRev1,
977                        ciscoSystemExtInfoGroupRev2,
978                        ciscoSystemExtErrorGroup,
979                        ciscoSystemExtHaGroup,
980                        ciscoSystemExtNotificationGroup,
981                        ciscoSystemExtHaGroupRev1
982                    }
983
984    GROUP           ciscoSystemExtInfoGroupOptional
985    DESCRIPTION
986        "Implementation of this group is optional."
987
988    GROUP           ciscoSystemExtSwFailureGroup
989    DESCRIPTION
990        "Implementation of this group is optional."
991
992    GROUP           ciscoSystemExtSwFailureGroup2
993    DESCRIPTION
994        "Implementation of this group is optional."
995
996    GROUP           ciscoSystemExtInfoTelnetGroup
997    DESCRIPTION
998        "Implementation of this group is optional."
999
1000    GROUP           ciscoSystemExtSwFailureGroup3
1001    DESCRIPTION
1002        "This group is mandatory if cseFailSwCoreNotifyExtended
1003        notification is implemented."
1004
1005    GROUP           ciscoSystemExtNotificationGroupSup2
1006    DESCRIPTION
1007        "Implementation of this group is optional. Implementing one
1008        of the two notifications cseFailSwCoreNotify or
1009        cseFailSwCoreNotifyExtended will suffice."
1010
1011    GROUP           ciscoSystemExtNotificationGroupSup1
1012    DESCRIPTION
1013        "The implementation of cseShutDownNotify is mandatory.
1014        However the implementation of cseFailSwCoreNotify is
1015        optional. Implementing one of the two notifications
1016        cseFailSwCoreNotify or cseFailSwCoreNotifyExtended will
1017        suffice."
1018
1019    GROUP           ciscoSystemExtSwFailureControlGroup
1020    DESCRIPTION
1021        "Implementation of this group is optional.  Implementing of
1022        this group is mandatory only when either
1023        cseFailSwCoreNotify or cseFailSwCoreNotifyExtended
1024        notification is implemented."
1025    ::= { ciscoSystemExtMIBCompliances 7 }
1026
1027ciscoSystemExtMIBComplianceRev7 MODULE-COMPLIANCE
1028    STATUS          deprecated
1029    DESCRIPTION
1030        "The compliance statement for entities which
1031        implement the CISCO-SYTEM-EXT-MIB."
1032    MODULE          -- this module
1033    MANDATORY-GROUPS {
1034                        ciscoSystemExtInfoGroupRev1,
1035                        ciscoSystemExtInfoGroupRev2,
1036                        ciscoSystemExtErrorGroup,
1037                        ciscoSystemExtHaGroup,
1038                        ciscoSystemExtNotificationGroup,
1039                        ciscoSystemExtNotificationGroupSup1,
1040                        ciscoSystemExtHaGroupRev1
1041                    }
1042
1043    GROUP           ciscoSystemExtInfoGroupOptional
1044    DESCRIPTION
1045        "Implementation of this group is optional."
1046
1047    GROUP           ciscoSystemExtSwFailureGroup
1048    DESCRIPTION
1049        "Implementation of this group is optional."
1050
1051    GROUP           ciscoSystemExtSwFailureGroup2
1052    DESCRIPTION
1053        "Implementation of this group is optional."
1054
1055    GROUP           ciscoSystemExtInfoTelnetGroup
1056    DESCRIPTION
1057        "Implementation of this group is optional."
1058
1059    GROUP           ciscoSystemExtInfoFIPSGroup
1060    DESCRIPTION
1061        "Implementation of this group is optional."
1062    ::= { ciscoSystemExtMIBCompliances 8 }
1063
1064ciscoSystemExtMIBComplianceRev8 MODULE-COMPLIANCE
1065    STATUS          deprecated
1066    DESCRIPTION
1067        "The compliance statement for entities which
1068        implement the CISCO-SYTEM-EXT-MIB."
1069    MODULE          -- this module
1070    MANDATORY-GROUPS {
1071                        ciscoSystemExtInfoGroupRev3,
1072                        ciscoSystemExtInfoGroupRev2,
1073                        ciscoSystemExtErrorGroup,
1074                        ciscoSystemExtHaGroup,
1075                        ciscoSystemExtNotificationGroup,
1076                        ciscoSystemExtNotificationGroupSup1,
1077                        ciscoSystemExtHaGroupRev1
1078                    }
1079
1080    GROUP           ciscoSystemExtInfoGroupOptional
1081    DESCRIPTION
1082        "Implementation of this group is optional."
1083
1084    GROUP           ciscoSystemExtSwFailureGroup
1085    DESCRIPTION
1086        "Implementation of this group is optional."
1087
1088    GROUP           ciscoSystemExtSwFailureGroup2
1089    DESCRIPTION
1090        "Implementation of this group is optional."
1091
1092    GROUP           ciscoSystemExtInfoTelnetGroup
1093    DESCRIPTION
1094        "Implementation of this group is optional."
1095
1096    GROUP           ciscoSystemExtInfoFIPSGroup
1097    DESCRIPTION
1098        "Implementation of this group is optional."
1099    ::= { ciscoSystemExtMIBCompliances 9 }
1100
1101ciscoSystemExtMIBComplianceRev9 MODULE-COMPLIANCE
1102    STATUS          deprecated
1103    DESCRIPTION
1104        "The compliance statement for entities which
1105        implement the CISCO-SYTEM-EXT-MIB."
1106    MODULE          -- this module
1107    MANDATORY-GROUPS {
1108                        ciscoSystemExtInfoGroupRev3,
1109                        ciscoSystemExtInfoGroupRev2,
1110                        ciscoSystemExtErrorGroup,
1111                        ciscoSystemExtHaGroup,
1112                        ciscoSystemExtNotificationGroup,
1113                        ciscoSystemExtNotificationGroupSup1,
1114                        ciscoSystemExtHaGroupRev1
1115                    }
1116
1117    GROUP           ciscoSystemExtInfoGroupOptional
1118    DESCRIPTION
1119        "Implementation of this group is optional."
1120
1121    GROUP           ciscoSystemExtSwFailureGroup
1122    DESCRIPTION
1123        "Implementation of this group is optional."
1124
1125    GROUP           ciscoSystemExtSwFailureGroup2
1126    DESCRIPTION
1127        "Implementation of this group is optional."
1128
1129    GROUP           ciscoSystemExtInfoTelnetGroup
1130    DESCRIPTION
1131        "Implementation of this group is optional."
1132
1133    GROUP           ciscoSystemExtInfoFIPSGroup
1134    DESCRIPTION
1135        "Implementation of this group is optional."
1136
1137    GROUP           ciscoSystemSwitchingModeObjectsGroup
1138    DESCRIPTION
1139        "Implementation of this group is optional."
1140    ::= { ciscoSystemExtMIBCompliances 11 }
1141
1142ciscoSystemExtMIBComplianceRev10 MODULE-COMPLIANCE
1143    STATUS          current
1144    DESCRIPTION
1145        "The compliance statement for entities which
1146        implement the CISCO-SYTEM-EXT-MIB."
1147    MODULE          -- this module
1148    MANDATORY-GROUPS {
1149                        ciscoSystemExtInfoGroupRev3,
1150                        ciscoSystemExtInfoGroupRev2,
1151                        ciscoSystemExtErrorGroup,
1152                        ciscoSystemExtHaGroup,
1153                        ciscoSystemExtNotificationGroup,
1154                        ciscoSystemExtNotificationGroupSup1,
1155                        ciscoSystemExtHaGroupRev1
1156                    }
1157
1158    GROUP           ciscoSystemExtInfoGroupOptional
1159    DESCRIPTION
1160        "Implementation of this group is optional."
1161
1162    GROUP           ciscoSystemExtSwFailureGroup
1163    DESCRIPTION
1164        "Implementation of this group is optional."
1165
1166    GROUP           ciscoSystemExtSwFailureGroup2
1167    DESCRIPTION
1168        "Implementation of this group is optional."
1169
1170    GROUP           ciscoSystemExtInfoTelnetGroup
1171    DESCRIPTION
1172        "Implementation of this group is optional."
1173
1174    GROUP           ciscoSystemExtInfoFIPSGroup
1175    DESCRIPTION
1176        "Implementation of this group is optional."
1177
1178    GROUP           ciscoSystemSwitchingModeObjectsGroup
1179    DESCRIPTION
1180        "Implementation of this group is optional."
1181
1182    GROUP           ciscoSystemMaintModeObjectsGroup
1183    DESCRIPTION
1184        "Implementation of this group is optional."
1185
1186    GROUP           ciscoSystemMaintModeNotificationGroup
1187    DESCRIPTION
1188        "Implementation of this group is optional."
1189    ::= { ciscoSystemExtMIBCompliances 12 }
1190
1191-- Units of Conformance
1192
1193ciscoSystemExtInfoGroup OBJECT-GROUP
1194    OBJECTS         {
1195                        cseSysCPUUtilization,
1196                        cseSysMemoryUtilization,
1197                        cseSysConfLastChange
1198                    }
1199    STATUS          deprecated
1200    DESCRIPTION
1201        "A collection of objects for system information.
1202        ciscoSystemExtInfoGroup object is superseded by ciscoSystemExtInfoGroupRev1."
1203    ::= { ciscoSystemExtMIBGroups 1 }
1204
1205ciscoSystemExtErrorGroup OBJECT-GROUP
1206    OBJECTS         {
1207                        cseSnmpErrorCode,
1208                        cseSnmpErrorDescription
1209                    }
1210    STATUS          current
1211    DESCRIPTION
1212        "A collection of objects for logging SNMP set error."
1213    ::= { ciscoSystemExtMIBGroups 2 }
1214
1215ciscoSystemExtHaGroup OBJECT-GROUP
1216    OBJECTS         {
1217                        cseHaRestartReason,
1218                        cseHaRestartService,
1219                        cseHaRestartStateless
1220                    }
1221    STATUS          current
1222    DESCRIPTION
1223        "A collection of objects for High Availability."
1224    ::= { ciscoSystemExtMIBGroups 3 }
1225
1226ciscoSystemExtNotificationGroup NOTIFICATION-GROUP
1227   NOTIFICATIONS    { cseHaRestartNotify }
1228    STATUS          current
1229    DESCRIPTION
1230        "A collection of notifications for the
1231        High Availability."
1232    ::= { ciscoSystemExtMIBGroups 4 }
1233
1234ciscoSystemExtInfoGroupRev1 OBJECT-GROUP
1235    OBJECTS         {
1236                        cseSysCPUUtilization,
1237                        cseSysMemoryUtilization,
1238                        cseSysConfLastChange,
1239                        cseSysAutoSync,
1240                        cseSysAutoSyncState
1241                    }
1242    STATUS          deprecated
1243    DESCRIPTION
1244        "A collection of objects for system information.
1245        ciscoSystemExtInfoGroupRev1 object is superseded by ciscoSystemExtInfoGroupRev3."
1246    ::= { ciscoSystemExtMIBGroups 5 }
1247
1248ciscoSystemExtInfoGroupOptional OBJECT-GROUP
1249    OBJECTS         { cseWriteErase }
1250    STATUS          current
1251    DESCRIPTION
1252        "A collection of objects for system information
1253        which are optional."
1254    ::= { ciscoSystemExtMIBGroups 6 }
1255
1256ciscoSystemExtSwFailureGroup OBJECT-GROUP
1257    OBJECTS         { cseSwCorePath }
1258    STATUS          current
1259    DESCRIPTION
1260        "A collection of objects for system software failure
1261        information which are optional."
1262    ::= { ciscoSystemExtMIBGroups 7 }
1263
1264ciscoSystemExtInfoGroupRev2 OBJECT-GROUP
1265    OBJECTS         { cseSysConsolePortStatus }
1266    STATUS          current
1267    DESCRIPTION
1268        "A collection of objects for system information."
1269    ::= { ciscoSystemExtMIBGroups 8 }
1270
1271ciscoSystemExtSwFailureGroup2 OBJECT-GROUP
1272    OBJECTS         {
1273                        cseSwCoresPID,
1274                        cseSwCoresTimeCreated,
1275                        cseSwCoresSlotNum
1276                    }
1277    STATUS          current
1278    DESCRIPTION
1279        "A collection of objects for system software failure
1280        information which are optional."
1281    ::= { ciscoSystemExtMIBGroups 9 }
1282
1283ciscoSystemExtNotificationGroupSup1 NOTIFICATION-GROUP
1284   NOTIFICATIONS    {
1285                        cseShutDownNotify,
1286                        cseFailSwCoreNotify
1287                    }
1288    STATUS          current
1289    DESCRIPTION
1290        "A collection of notifications for the
1291        system MIB."
1292    ::= { ciscoSystemExtMIBGroups 10 }
1293
1294ciscoSystemExtHaGroupRev1 OBJECT-GROUP
1295    OBJECTS         { cseHaShutDownReason }
1296    STATUS          current
1297    DESCRIPTION
1298        "A collection of objects for High Availability."
1299    ::= { ciscoSystemExtMIBGroups 11 }
1300
1301ciscoSystemExtInfoTelnetGroup OBJECT-GROUP
1302    OBJECTS         { cseSysTelnetServiceActivation }
1303    STATUS          current
1304    DESCRIPTION
1305        "A collection of objects related to telnet support
1306        to the device."
1307    ::= { ciscoSystemExtMIBGroups 12 }
1308
1309ciscoSystemExtNotificationGroupSup2 NOTIFICATION-GROUP
1310   NOTIFICATIONS    { cseFailSwCoreNotifyExtended }
1311    STATUS          current
1312    DESCRIPTION
1313        "A collection of notification related to core file
1314        creation."
1315    ::= { ciscoSystemExtMIBGroups 13 }
1316
1317ciscoSystemExtSwFailureGroup3 OBJECT-GROUP
1318    OBJECTS         { cseSwCoresFileName }
1319    STATUS          current
1320    DESCRIPTION
1321        "A collection of objects related to the core file."
1322    ::= { ciscoSystemExtMIBGroups 14 }
1323
1324ciscoSystemExtSwFailureControlGroup OBJECT-GROUP
1325    OBJECTS         { ciscoSwFailureNotifEnable }
1326    STATUS          current
1327    DESCRIPTION
1328        "This group of objects controls the sending of
1329        notifications defined in this MIB module."
1330    ::= { ciscoSystemExtMIBGroups 15 }
1331
1332ciscoSystemExtInfoFIPSGroup OBJECT-GROUP
1333    OBJECTS         { cseSysFIPSModeActivation }
1334    STATUS          current
1335    DESCRIPTION
1336        "A collection of objects related to FIPS support
1337        to the device."
1338    ::= { ciscoSystemExtMIBGroups 16 }
1339
1340ciscoSystemExtInfoGroupRev3 OBJECT-GROUP
1341    OBJECTS         {
1342                        cseSysCPUUtilization,
1343                        cseSysMemoryUtilization,
1344                        cseSysConfLastChange,
1345                        cseSysAutoSync,
1346                        cseSysAutoSyncState,
1347                        cseSysUpTime
1348                    }
1349    STATUS          current
1350    DESCRIPTION
1351        "A collection of objects for system information."
1352    ::= { ciscoSystemExtMIBGroups 17 }
1353
1354ciscoSystemSwitchingModeObjectsGroup OBJECT-GROUP
1355    OBJECTS         {
1356                        ciscoSystemSwitchingModeAdmin,
1357                        ciscoSystemSwitchingModeOper
1358                    }
1359    STATUS          current
1360    DESCRIPTION
1361        "A collection of objects to support Switching Mode feature."
1362    ::= { ciscoSystemExtMIBGroups 18 }
1363
1364ciscoSystemMaintModeObjectsGroup OBJECT-GROUP
1365    OBJECTS         {
1366                        cseMaintModeState,
1367                        ciscoSystemNormalModeNotifEnable,
1368                        ciscoSystemMaintModeNotifEnable
1369                    }
1370    STATUS          current
1371    DESCRIPTION
1372        "A collection of objects to support Maint mode state feature."
1373    ::= { ciscoSystemExtMIBGroups 19 }
1374
1375ciscoSystemMaintModeNotificationGroup NOTIFICATION-GROUP
1376   NOTIFICATIONS    {
1377                        cseNormalModeChangeNotify,
1378                        cseMaintModeChangeNotify
1379                    }
1380    STATUS          current
1381    DESCRIPTION
1382        "A collection of notification related to core file
1383        creation."
1384    ::= { ciscoSystemExtMIBGroups 20 }
1385
1386ciscoSystemReloadObjectsGroup OBJECT-GROUP
1387    OBJECTS         { cseSystemReloadPending }
1388    STATUS          current
1389    DESCRIPTION
1390        "A collection of objects to support system reload."
1391    ::= { ciscoSystemExtMIBGroups 21 }
1392
1393END
1394
1395
1396
1397