1# Makefile.in generated by automake 1.16.2 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2020 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17VPATH = @srcdir@
18am__is_gnu_make = { \
19  if test -z '$(MAKELEVEL)'; then \
20    false; \
21  elif test -n '$(MAKE_HOST)'; then \
22    true; \
23  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
24    true; \
25  else \
26    false; \
27  fi; \
28}
29am__make_running_with_option = \
30  case $${target_option-} in \
31      ?) ;; \
32      *) echo "am__make_running_with_option: internal error: invalid" \
33              "target option '$${target_option-}' specified" >&2; \
34         exit 1;; \
35  esac; \
36  has_opt=no; \
37  sane_makeflags=$$MAKEFLAGS; \
38  if $(am__is_gnu_make); then \
39    sane_makeflags=$$MFLAGS; \
40  else \
41    case $$MAKEFLAGS in \
42      *\\[\ \	]*) \
43        bs=\\; \
44        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
45          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
46    esac; \
47  fi; \
48  skip_next=no; \
49  strip_trailopt () \
50  { \
51    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
52  }; \
53  for flg in $$sane_makeflags; do \
54    test $$skip_next = yes && { skip_next=no; continue; }; \
55    case $$flg in \
56      *=*|--*) continue;; \
57        -*I) strip_trailopt 'I'; skip_next=yes;; \
58      -*I?*) strip_trailopt 'I';; \
59        -*O) strip_trailopt 'O'; skip_next=yes;; \
60      -*O?*) strip_trailopt 'O';; \
61        -*l) strip_trailopt 'l'; skip_next=yes;; \
62      -*l?*) strip_trailopt 'l';; \
63      -[dEDm]) skip_next=yes;; \
64      -[JT]) skip_next=yes;; \
65    esac; \
66    case $$flg in \
67      *$$target_option*) has_opt=yes; break;; \
68    esac; \
69  done; \
70  test $$has_opt = yes
71am__make_dryrun = (target_option=n; $(am__make_running_with_option))
72am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
73pkgdatadir = $(datadir)/@PACKAGE@
74pkgincludedir = $(includedir)/@PACKAGE@
75pkglibdir = $(libdir)/@PACKAGE@
76pkglibexecdir = $(libexecdir)/@PACKAGE@
77am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
78install_sh_DATA = $(install_sh) -c -m 644
79install_sh_PROGRAM = $(install_sh) -c
80install_sh_SCRIPT = $(install_sh) -c
81INSTALL_HEADER = $(INSTALL_DATA)
82transform = $(program_transform_name)
83NORMAL_INSTALL = :
84PRE_INSTALL = :
85POST_INSTALL = :
86NORMAL_UNINSTALL = :
87PRE_UNINSTALL = :
88POST_UNINSTALL = :
89build_triplet = @build@
90host_triplet = @host@
91@HAVE_BINDDIR_TRUE@am__append_1 = bind/Makefile.in bind/bind.tar.gz bind/version.tmp
92subdir = .
93ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
94am__aclocal_m4_deps = $(top_srcdir)/configure.ac
95am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
96	$(ACLOCAL_M4)
97DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
98	$(am__configure_deps) $(nobase_include_HEADERS) \
99	$(am__DIST_COMMON)
100am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
101 configure.lineno config.status.lineno
102mkinstalldirs = $(install_sh) -d
103CONFIG_HEADER = $(top_builddir)/includes/config.h
104CONFIG_CLEAN_FILES = doc/devel/doxyfile
105CONFIG_CLEAN_VPATH_FILES =
106AM_V_P = $(am__v_P_@AM_V@)
107am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
108am__v_P_0 = false
109am__v_P_1 = :
110AM_V_GEN = $(am__v_GEN_@AM_V@)
111am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
112am__v_GEN_0 = @echo "  GEN     " $@;
113am__v_GEN_1 =
114AM_V_at = $(am__v_at_@AM_V@)
115am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
116am__v_at_0 = @
117am__v_at_1 =
118SOURCES =
119DIST_SOURCES =
120RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
121	ctags-recursive dvi-recursive html-recursive info-recursive \
122	install-data-recursive install-dvi-recursive \
123	install-exec-recursive install-html-recursive \
124	install-info-recursive install-pdf-recursive \
125	install-ps-recursive install-recursive installcheck-recursive \
126	installdirs-recursive pdf-recursive ps-recursive \
127	tags-recursive uninstall-recursive
128am__can_run_installinfo = \
129  case $$AM_UPDATE_INFO_DIR in \
130    n|no|NO) false;; \
131    *) (install-info --version) >/dev/null 2>&1;; \
132  esac
133am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
134am__vpath_adj = case $$p in \
135    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
136    *) f=$$p;; \
137  esac;
138am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
139am__install_max = 40
140am__nobase_strip_setup = \
141  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
142am__nobase_strip = \
143  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
144am__nobase_list = $(am__nobase_strip_setup); \
145  for p in $$list; do echo "$$p $$p"; done | \
146  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
147  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
148    if (++n[$$2] == $(am__install_max)) \
149      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
150    END { for (dir in files) print dir, files[dir] }'
151am__base_list = \
152  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
153  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
154am__uninstall_files_from_dir = { \
155  test -z "$$files" \
156    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
157    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
158         $(am__cd) "$$dir" && rm -f $$files; }; \
159  }
160am__installdirs = "$(DESTDIR)$(includedir)"
161HEADERS = $(nobase_include_HEADERS)
162RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
163  distclean-recursive maintainer-clean-recursive
164am__recursive_targets = \
165  $(RECURSIVE_TARGETS) \
166  $(RECURSIVE_CLEAN_TARGETS) \
167  $(am__extra_recursive_targets)
168AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
169	cscope distdir distdir-am dist dist-all distcheck
170am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
171# Read a list of newline-separated strings from the standard input,
172# and print each of them once, without duplicates.  Input order is
173# *not* preserved.
174am__uniquify_input = $(AWK) '\
175  BEGIN { nonempty = 0; } \
176  { items[$$0] = 1; nonempty = 1; } \
177  END { if (nonempty) { for (i in items) print i; }; } \
178'
179# Make sure the list of sources is unique.  This is necessary because,
180# e.g., the same source file might be shared among _SOURCES variables
181# for different programs/libraries.
182am__define_uniq_tagged_files = \
183  list='$(am__tagged_files)'; \
184  unique=`for i in $$list; do \
185    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
186  done | $(am__uniquify_input)`
187ETAGS = etags
188CTAGS = ctags
189CSCOPE = cscope
190am__DIST_COMMON = $(srcdir)/Makefile.in \
191	$(top_srcdir)/doc/devel/doxyfile.in README compile \
192	config.guess config.sub depcomp install-sh missing
193DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
194distdir = $(PACKAGE)-$(VERSION)
195top_distdir = $(distdir)
196am__remove_distdir = \
197  if test -d "$(distdir)"; then \
198    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
199      && rm -rf "$(distdir)" \
200      || { sleep 5 && rm -rf "$(distdir)"; }; \
201  else :; fi
202am__post_remove_distdir = $(am__remove_distdir)
203am__relativize = \
204  dir0=`pwd`; \
205  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
206  sed_rest='s,^[^/]*/*,,'; \
207  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
208  sed_butlast='s,/*[^/]*$$,,'; \
209  while test -n "$$dir1"; do \
210    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
211    if test "$$first" != "."; then \
212      if test "$$first" = ".."; then \
213        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
214        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
215      else \
216        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
217        if test "$$first2" = "$$first"; then \
218          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
219        else \
220          dir2="../$$dir2"; \
221        fi; \
222        dir0="$$dir0"/"$$first"; \
223      fi; \
224    fi; \
225    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
226  done; \
227  reldir="$$dir2"
228DIST_ARCHIVES = $(distdir).tar.gz
229GZIP_ENV = --best
230DIST_TARGETS = dist-gzip
231distuninstallcheck_listfiles = find . -type f -print
232am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
233  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
234distcleancheck_listfiles = find . -type f -print
235A = @A@
236ACLOCAL = @ACLOCAL@
237AMTAR = @AMTAR@
238AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
239AR = @AR@
240ATF_BIN = @ATF_BIN@
241ATF_CFLAGS = @ATF_CFLAGS@
242ATF_LDFLAGS = @ATF_LDFLAGS@
243AUTOCONF = @AUTOCONF@
244AUTOHEADER = @AUTOHEADER@
245AUTOMAKE = @AUTOMAKE@
246AWK = @AWK@
247BINDCONFIG = @BINDCONFIG@
248BINDDIR = @BINDDIR@
249BINDIOMUX = @BINDIOMUX@
250BINDLIBDNSDIR = @BINDLIBDNSDIR@
251BINDLIBIRSDIR = @BINDLIBIRSDIR@
252BINDLIBISCCFGDIR = @BINDLIBISCCFGDIR@
253BINDLIBISCDIR = @BINDLIBISCDIR@
254BINDLT = @BINDLT@
255BINDSRCDIR = @BINDSRCDIR@
256BINDSUBDIR = @BINDSUBDIR@
257CC = @CC@
258CCDEPMODE = @CCDEPMODE@
259CFLAGS = @CFLAGS@
260CPP = @CPP@
261CPPFLAGS = @CPPFLAGS@
262CYGPATH_W = @CYGPATH_W@
263DEFS = @DEFS@
264DEPDIR = @DEPDIR@
265DHLIBS = @DHLIBS@
266DISTCHECK_ATF_CONFIGURE_FLAG = @DISTCHECK_ATF_CONFIGURE_FLAG@
267DISTCHECK_LIBBIND_CONFIGURE_FLAG = @DISTCHECK_LIBBIND_CONFIGURE_FLAG@
268DISTCHECK_LIBTOOL_CONFIGURE_FLAG = @DISTCHECK_LIBTOOL_CONFIGURE_FLAG@
269ECHO_C = @ECHO_C@
270ECHO_N = @ECHO_N@
271ECHO_T = @ECHO_T@
272EGREP = @EGREP@
273EXEEXT = @EXEEXT@
274GREP = @GREP@
275INSTALL = @INSTALL@
276INSTALL_DATA = @INSTALL_DATA@
277INSTALL_PROGRAM = @INSTALL_PROGRAM@
278INSTALL_SCRIPT = @INSTALL_SCRIPT@
279INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
280LDAP_CFLAGS = @LDAP_CFLAGS@
281LDAP_LIBS = @LDAP_LIBS@
282LDFLAGS = @LDFLAGS@
283LIBOBJS = @LIBOBJS@
284LIBS = @LIBS@
285LTLIBOBJS = @LTLIBOBJS@
286MAINT = @MAINT@
287MAKEINFO = @MAKEINFO@
288MKDIR_P = @MKDIR_P@
289OBJEXT = @OBJEXT@
290PACKAGE = @PACKAGE@
291PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
292PACKAGE_NAME = @PACKAGE_NAME@
293PACKAGE_STRING = @PACKAGE_STRING@
294PACKAGE_TARNAME = @PACKAGE_TARNAME@
295PACKAGE_URL = @PACKAGE_URL@
296PACKAGE_VERSION = @PACKAGE_VERSION@
297PATH_SEPARATOR = @PATH_SEPARATOR@
298Q = @Q@
299RANLIB = @RANLIB@
300SET_MAKE = @SET_MAKE@
301SHELL = @SHELL@
302STRIP = @STRIP@
303UNITTESTS = @UNITTESTS@
304VERSION = @VERSION@
305abs_builddir = @abs_builddir@
306abs_srcdir = @abs_srcdir@
307abs_top_builddir = @abs_top_builddir@
308abs_top_srcdir = @abs_top_srcdir@
309ac_ct_CC = @ac_ct_CC@
310ac_prefix_program = @ac_prefix_program@
311am__include = @am__include@
312am__leading_dot = @am__leading_dot@
313am__quote = @am__quote@
314am__tar = @am__tar@
315am__untar = @am__untar@
316bindir = @bindir@
317build = @build@
318build_alias = @build_alias@
319build_cpu = @build_cpu@
320build_os = @build_os@
321build_vendor = @build_vendor@
322builddir = @builddir@
323byte_order = @byte_order@
324datadir = @datadir@
325datarootdir = @datarootdir@
326docdir = @docdir@
327dvidir = @dvidir@
328exec_prefix = @exec_prefix@
329host = @host@
330host_alias = @host_alias@
331host_cpu = @host_cpu@
332host_os = @host_os@
333host_vendor = @host_vendor@
334htmldir = @htmldir@
335includedir = @includedir@
336infodir = @infodir@
337install_sh = @install_sh@
338libdir = @libdir@
339libexecdir = @libexecdir@
340localedir = @localedir@
341localstatedir = @localstatedir@
342mandir = @mandir@
343mkdir_p = @mkdir_p@
344oldincludedir = @oldincludedir@
345pdfdir = @pdfdir@
346pkgcfg_found = @pkgcfg_found@
347prefix = @prefix@
348program_transform_name = @program_transform_name@
349psdir = @psdir@
350sbindir = @sbindir@
351sharedstatedir = @sharedstatedir@
352srcdir = @srcdir@
353sysconfdir = @sysconfdir@
354target_alias = @target_alias@
355top_build_prefix = @top_build_prefix@
356top_builddir = @top_builddir@
357top_srcdir = @top_srcdir@
358
359#
360# for libtool
361#
362ACLOCAL_AMFLAGS = -I m4
363
364#
365# We have a lot of files that we want shipped with the distribution.
366#
367EXTRA_DIST = RELNOTES LICENSE configure.ac+lt config+lt \
368	contrib/3.0b1-lease-convert contrib/dhclient-tz-exithook.sh \
369	contrib/dhcp.spec contrib/sethostname.sh contrib/solaris.init \
370	contrib/ms2isc/Registry.pm contrib/ms2isc/ms2isc.pl \
371	contrib/ms2isc/readme.txt contrib/ldap/dhcpd-conf-to-ldap \
372	contrib/ldap/dhcp.schema contrib/ldap/README.ldap \
373	contrib/dhcp-lease-list.pl doc/BIND-libraries \
374	doc/DHCPv4-over-DHCPv6 doc/IANA-arp-parameters doc/Makefile \
375	doc/References.html doc/References.txt doc/References.xml \
376	doc/api+protocol doc/ja_JP.eucJP/dhclient-script.8 \
377	doc/ja_JP.eucJP/dhclient.8 doc/ja_JP.eucJP/dhclient.conf.5 \
378	doc/ja_JP.eucJP/dhclient.leases.5 doc/ja_JP.eucJP/dhcp-eval.5 \
379	doc/ja_JP.eucJP/dhcp-options.5 \
380	doc/examples/dhclient-dhcpv6.conf \
381	doc/examples/dhcpd-dhcpv6.conf doc/devel/arch.dox \
382	doc/devel/atf.dox doc/devel/contrib.dox doc/devel/debug.dox \
383	doc/devel/isc-logo.jpg doc/devel/libtool.dox \
384	doc/devel/mainpage.dox doc/devel/omapi.dox doc/devel/qa.dox \
385	client/tests/Atffile common/tests/Atffile server/tests/Atffile \
386	client/tests/Kyuafile common/tests/Kyuafile \
387	server/tests/Kyuafile m4/README CONTRIBUTING.md \
388	$(am__append_1)
389
390# Use an autoconf substitution vs an automake conditional here
391# to fool automake when the bind directory does not exist.
392SUBDIRS = @BINDSUBDIR@ includes tests common omapip client dhcpctl relay server
393DIST_SUBDIRS = $(SUBDIRS) keama
394nobase_include_HEADERS = dhcpctl/dhcpctl.h
395
396#
397# distcheck tuning
398#
399DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_ATF_CONFIGURE_FLAG@ \
400	@DISTCHECK_LIBBIND_CONFIGURE_FLAG@ \
401	@DISTCHECK_LIBTOOL_CONFIGURE_FLAG@ $(am__empty)
402all: all-recursive
403
404.SUFFIXES:
405am--refresh: Makefile
406	@:
407$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
408	@for dep in $?; do \
409	  case '$(am__configure_deps)' in \
410	    *$$dep*) \
411	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
412	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
413		&& exit 0; \
414	      exit 1;; \
415	  esac; \
416	done; \
417	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
418	$(am__cd) $(top_srcdir) && \
419	  $(AUTOMAKE) --foreign Makefile
420
421$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
422	$(SHELL) ./config.status --recheck
423
424$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
425	$(am__cd) $(srcdir) && $(AUTOCONF)
426$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
427	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
428$(am__aclocal_m4_deps):
429doc/devel/doxyfile: $(top_builddir)/config.status $(top_srcdir)/doc/devel/doxyfile.in
430	cd $(top_builddir) && $(SHELL) ./config.status $@
431install-nobase_includeHEADERS: $(nobase_include_HEADERS)
432	@$(NORMAL_INSTALL)
433	@list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \
434	if test -n "$$list"; then \
435	  echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
436	  $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
437	fi; \
438	$(am__nobase_list) | while read dir files; do \
439	  xfiles=; for file in $$files; do \
440	    if test -f "$$file"; then xfiles="$$xfiles $$file"; \
441	    else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
442	  test -z "$$xfiles" || { \
443	    test "x$$dir" = x. || { \
444	      echo " $(MKDIR_P) '$(DESTDIR)$(includedir)/$$dir'"; \
445	      $(MKDIR_P) "$(DESTDIR)$(includedir)/$$dir"; }; \
446	    echo " $(INSTALL_HEADER) $$xfiles '$(DESTDIR)$(includedir)/$$dir'"; \
447	    $(INSTALL_HEADER) $$xfiles "$(DESTDIR)$(includedir)/$$dir" || exit $$?; }; \
448	done
449
450uninstall-nobase_includeHEADERS:
451	@$(NORMAL_UNINSTALL)
452	@list='$(nobase_include_HEADERS)'; test -n "$(includedir)" || list=; \
453	$(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
454	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)
455
456# This directory's subdirectories are mostly independent; you can cd
457# into them and run 'make' without going through this Makefile.
458# To change the values of 'make' variables: instead of editing Makefiles,
459# (1) if the variable is set in 'config.status', edit 'config.status'
460#     (which will cause the Makefiles to be regenerated when you run 'make');
461# (2) otherwise, pass the desired values on the 'make' command line.
462$(am__recursive_targets):
463	@fail=; \
464	if $(am__make_keepgoing); then \
465	  failcom='fail=yes'; \
466	else \
467	  failcom='exit 1'; \
468	fi; \
469	dot_seen=no; \
470	target=`echo $@ | sed s/-recursive//`; \
471	case "$@" in \
472	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
473	  *) list='$(SUBDIRS)' ;; \
474	esac; \
475	for subdir in $$list; do \
476	  echo "Making $$target in $$subdir"; \
477	  if test "$$subdir" = "."; then \
478	    dot_seen=yes; \
479	    local_target="$$target-am"; \
480	  else \
481	    local_target="$$target"; \
482	  fi; \
483	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
484	  || eval $$failcom; \
485	done; \
486	if test "$$dot_seen" = "no"; then \
487	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
488	fi; test -z "$$fail"
489
490ID: $(am__tagged_files)
491	$(am__define_uniq_tagged_files); mkid -fID $$unique
492tags: tags-recursive
493TAGS: tags
494
495tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
496	set x; \
497	here=`pwd`; \
498	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
499	  include_option=--etags-include; \
500	  empty_fix=.; \
501	else \
502	  include_option=--include; \
503	  empty_fix=; \
504	fi; \
505	list='$(SUBDIRS)'; for subdir in $$list; do \
506	  if test "$$subdir" = .; then :; else \
507	    test ! -f $$subdir/TAGS || \
508	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
509	  fi; \
510	done; \
511	$(am__define_uniq_tagged_files); \
512	shift; \
513	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
514	  test -n "$$unique" || unique=$$empty_fix; \
515	  if test $$# -gt 0; then \
516	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
517	      "$$@" $$unique; \
518	  else \
519	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
520	      $$unique; \
521	  fi; \
522	fi
523ctags: ctags-recursive
524
525CTAGS: ctags
526ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
527	$(am__define_uniq_tagged_files); \
528	test -z "$(CTAGS_ARGS)$$unique" \
529	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
530	     $$unique
531
532GTAGS:
533	here=`$(am__cd) $(top_builddir) && pwd` \
534	  && $(am__cd) $(top_srcdir) \
535	  && gtags -i $(GTAGS_ARGS) "$$here"
536cscope: cscope.files
537	test ! -s cscope.files \
538	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
539clean-cscope:
540	-rm -f cscope.files
541cscope.files: clean-cscope cscopelist
542cscopelist: cscopelist-recursive
543
544cscopelist-am: $(am__tagged_files)
545	list='$(am__tagged_files)'; \
546	case "$(srcdir)" in \
547	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
548	  *) sdir=$(subdir)/$(srcdir) ;; \
549	esac; \
550	for i in $$list; do \
551	  if test -f "$$i"; then \
552	    echo "$(subdir)/$$i"; \
553	  else \
554	    echo "$$sdir/$$i"; \
555	  fi; \
556	done >> $(top_builddir)/cscope.files
557
558distclean-tags:
559	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
560	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
561
562distdir: $(BUILT_SOURCES)
563	$(MAKE) $(AM_MAKEFLAGS) distdir-am
564
565distdir-am: $(DISTFILES)
566	$(am__remove_distdir)
567	test -d "$(distdir)" || mkdir "$(distdir)"
568	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
569	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
570	list='$(DISTFILES)'; \
571	  dist_files=`for file in $$list; do echo $$file; done | \
572	  sed -e "s|^$$srcdirstrip/||;t" \
573	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
574	case $$dist_files in \
575	  */*) $(MKDIR_P) `echo "$$dist_files" | \
576			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
577			   sort -u` ;; \
578	esac; \
579	for file in $$dist_files; do \
580	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
581	  if test -d $$d/$$file; then \
582	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
583	    if test -d "$(distdir)/$$file"; then \
584	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
585	    fi; \
586	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
587	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
588	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
589	    fi; \
590	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
591	  else \
592	    test -f "$(distdir)/$$file" \
593	    || cp -p $$d/$$file "$(distdir)/$$file" \
594	    || exit 1; \
595	  fi; \
596	done
597	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
598	  if test "$$subdir" = .; then :; else \
599	    $(am__make_dryrun) \
600	      || test -d "$(distdir)/$$subdir" \
601	      || $(MKDIR_P) "$(distdir)/$$subdir" \
602	      || exit 1; \
603	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
604	    $(am__relativize); \
605	    new_distdir=$$reldir; \
606	    dir1=$$subdir; dir2="$(top_distdir)"; \
607	    $(am__relativize); \
608	    new_top_distdir=$$reldir; \
609	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
610	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
611	    ($(am__cd) $$subdir && \
612	      $(MAKE) $(AM_MAKEFLAGS) \
613	        top_distdir="$$new_top_distdir" \
614	        distdir="$$new_distdir" \
615		am__remove_distdir=: \
616		am__skip_length_check=: \
617		am__skip_mode_fix=: \
618	        distdir) \
619	      || exit 1; \
620	  fi; \
621	done
622	-test -n "$(am__skip_mode_fix)" \
623	|| find "$(distdir)" -type d ! -perm -755 \
624		-exec chmod u+rwx,go+rx {} \; -o \
625	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
626	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
627	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
628	|| chmod -R a+r "$(distdir)"
629dist-gzip: distdir
630	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
631	$(am__post_remove_distdir)
632
633dist-bzip2: distdir
634	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
635	$(am__post_remove_distdir)
636
637dist-lzip: distdir
638	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
639	$(am__post_remove_distdir)
640
641dist-xz: distdir
642	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
643	$(am__post_remove_distdir)
644
645dist-zstd: distdir
646	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
647	$(am__post_remove_distdir)
648
649dist-tarZ: distdir
650	@echo WARNING: "Support for distribution archives compressed with" \
651		       "legacy program 'compress' is deprecated." >&2
652	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
653	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
654	$(am__post_remove_distdir)
655
656dist-shar: distdir
657	@echo WARNING: "Support for shar distribution archives is" \
658	               "deprecated." >&2
659	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
660	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
661	$(am__post_remove_distdir)
662
663dist-zip: distdir
664	-rm -f $(distdir).zip
665	zip -rq $(distdir).zip $(distdir)
666	$(am__post_remove_distdir)
667
668dist dist-all:
669	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
670	$(am__post_remove_distdir)
671
672# This target untars the dist file and tries a VPATH configuration.  Then
673# it guarantees that the distribution is self-contained by making another
674# tarfile.
675distcheck: dist
676	case '$(DIST_ARCHIVES)' in \
677	*.tar.gz*) \
678	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
679	*.tar.bz2*) \
680	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
681	*.tar.lz*) \
682	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
683	*.tar.xz*) \
684	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
685	*.tar.Z*) \
686	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
687	*.shar.gz*) \
688	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
689	*.zip*) \
690	  unzip $(distdir).zip ;;\
691	*.tar.zst*) \
692	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
693	esac
694	chmod -R a-w $(distdir)
695	chmod u+w $(distdir)
696	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
697	chmod a-w $(distdir)
698	test -d $(distdir)/_build || exit 0; \
699	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
700	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
701	  && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \
702	  && am__cwd=`pwd` \
703	  && $(am__cd) $(distdir)/_build/sub \
704	  && ../../configure \
705	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
706	    $(DISTCHECK_CONFIGURE_FLAGS) \
707	    --srcdir=../.. --prefix="$$dc_install_base" \
708	  && $(MAKE) $(AM_MAKEFLAGS) \
709	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
710	  && $(MAKE) $(AM_MAKEFLAGS) check \
711	  && $(MAKE) $(AM_MAKEFLAGS) install \
712	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
713	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
714	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
715	        distuninstallcheck \
716	  && chmod -R a-w "$$dc_install_base" \
717	  && ({ \
718	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
719	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
720	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
721	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
722	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
723	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
724	  && rm -rf "$$dc_destdir" \
725	  && $(MAKE) $(AM_MAKEFLAGS) dist \
726	  && rm -rf $(DIST_ARCHIVES) \
727	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
728	  && cd "$$am__cwd" \
729	  || exit 1
730	$(am__post_remove_distdir)
731	@(echo "$(distdir) archives ready for distribution: "; \
732	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
733	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
734distuninstallcheck:
735	@test -n '$(distuninstallcheck_dir)' || { \
736	  echo 'ERROR: trying to run $@ with an empty' \
737	       '$$(distuninstallcheck_dir)' >&2; \
738	  exit 1; \
739	}; \
740	$(am__cd) '$(distuninstallcheck_dir)' || { \
741	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
742	  exit 1; \
743	}; \
744	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
745	   || { echo "ERROR: files left after uninstall:" ; \
746	        if test -n "$(DESTDIR)"; then \
747	          echo "  (check DESTDIR support)"; \
748	        fi ; \
749	        $(distuninstallcheck_listfiles) ; \
750	        exit 1; } >&2
751distcleancheck: distclean
752	@if test '$(srcdir)' = . ; then \
753	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
754	  exit 1 ; \
755	fi
756	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
757	  || { echo "ERROR: files left in build directory after distclean:" ; \
758	       $(distcleancheck_listfiles) ; \
759	       exit 1; } >&2
760check-am: all-am
761check: check-recursive
762all-am: Makefile $(HEADERS)
763installdirs: installdirs-recursive
764installdirs-am:
765	for dir in "$(DESTDIR)$(includedir)"; do \
766	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
767	done
768install: install-recursive
769install-exec: install-exec-recursive
770install-data: install-data-recursive
771uninstall: uninstall-recursive
772
773install-am: all-am
774	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
775
776installcheck: installcheck-recursive
777install-strip:
778	if test -z '$(STRIP)'; then \
779	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
780	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
781	      install; \
782	else \
783	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
784	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
785	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
786	fi
787mostlyclean-generic:
788
789clean-generic:
790
791distclean-generic:
792	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
793	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
794
795maintainer-clean-generic:
796	@echo "This command is intended for maintainers to use"
797	@echo "it deletes files that may require special tools to rebuild."
798clean: clean-recursive
799
800clean-am: clean-generic mostlyclean-am
801
802distclean: distclean-recursive
803	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
804	-rm -f Makefile
805distclean-am: clean-am distclean-generic distclean-local \
806	distclean-tags
807
808dvi: dvi-recursive
809
810dvi-am:
811
812html: html-recursive
813
814html-am:
815
816info: info-recursive
817
818info-am:
819
820install-data-am: install-nobase_includeHEADERS
821
822install-dvi: install-dvi-recursive
823
824install-dvi-am:
825
826install-exec-am:
827
828install-html: install-html-recursive
829
830install-html-am:
831
832install-info: install-info-recursive
833
834install-info-am:
835
836install-man:
837
838install-pdf: install-pdf-recursive
839
840install-pdf-am:
841
842install-ps: install-ps-recursive
843
844install-ps-am:
845
846installcheck-am:
847
848maintainer-clean: maintainer-clean-recursive
849	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
850	-rm -rf $(top_srcdir)/autom4te.cache
851	-rm -f Makefile
852maintainer-clean-am: distclean-am maintainer-clean-generic
853
854mostlyclean: mostlyclean-recursive
855
856mostlyclean-am: mostlyclean-generic
857
858pdf: pdf-recursive
859
860pdf-am:
861
862ps: ps-recursive
863
864ps-am:
865
866uninstall-am: uninstall-nobase_includeHEADERS
867
868.MAKE: $(am__recursive_targets) install-am install-strip
869
870.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
871	am--refresh check check-am clean clean-cscope clean-generic \
872	cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \
873	dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \
874	dist-zstd distcheck distclean distclean-generic \
875	distclean-local distclean-tags distcleancheck distdir \
876	distuninstallcheck dvi dvi-am html html-am info info-am \
877	install install-am install-data install-data-am install-dvi \
878	install-dvi-am install-exec install-exec-am install-html \
879	install-html-am install-info install-info-am install-man \
880	install-nobase_includeHEADERS install-pdf install-pdf-am \
881	install-ps install-ps-am install-strip installcheck \
882	installcheck-am installdirs installdirs-am maintainer-clean \
883	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
884	pdf-am ps ps-am tags tags-am uninstall uninstall-am \
885	uninstall-nobase_includeHEADERS
886
887.PRECIOUS: Makefile
888
889
890#
891# automake adds dependencies that we don't like, so we explicitly remove them
892#
893Makefile:
894
895distcheck-hook:
896@HAVE_BINDDIR_TRUE@	chmod u+w $(distdir)/bind
897
898distclean-local:
899	rm -f config.report
900
901# Tell versions [3.59,3.63) of GNU make to not export all variables.
902# Otherwise a system limit (for SysV at least) may be exceeded.
903.NOEXPORT:
904