1## libtool.m4 - Configure libtool for the host system. -*-Shell-script-*- 2## Copyright 1996, 1997, 1998, 1999, 2000, 2001 3## Free Software Foundation, Inc. 4## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 5## 6## This program is free software; you can redistribute it and/or modify 7## it under the terms of the GNU General Public License as published by 8## the Free Software Foundation; either version 2 of the License, or 9## (at your option) any later version. 10## 11## This program is distributed in the hope that it will be useful, but 12## WITHOUT ANY WARRANTY; without even the implied warranty of 13## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14## General Public License for more details. 15## 16## You should have received a copy of the GNU General Public License 17## along with this program; if not, write to the Free Software 18## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 19## 20## As a special exception to the GNU General Public License, if you 21## distribute this file as part of a program that contains a 22## configuration script generated by Autoconf, you may include it under 23## the same distribution terms that you use for the rest of that program. 24 25# serial 46 AC_PROG_LIBTOOL 26AC_DEFUN([AC_PROG_LIBTOOL], 27[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl 28dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX 29dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. 30 AC_PROVIDE_IFELSE([AC_PROG_CXX], 31 [AC_LIBTOOL_CXX], 32 [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX 33])]) 34 35dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. 36dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run 37dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. 38 AC_PROVIDE_IFELSE([AC_PROG_GCJ], 39 [AC_LIBTOOL_GCJ], 40 [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], 41 [AC_LIBTOOL_GCJ], 42 [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], 43 [AC_LIBTOOL_GCJ], 44 [ifdef([AC_PROG_GCJ], 45 [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ 46])]) 47 ifdef([A][M_PROG_GCJ], 48 [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ 49])]) 50 ifdef([LT_AC_PROG_GCJ], 51 [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ 52])])])])])]) 53 54AC_DEFUN([_AC_PROG_LIBTOOL], 55[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl 56AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl 57AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl 58 59# Save cache, so that ltconfig can load it 60AC_CACHE_SAVE 61 62# Actually configure libtool. ac_aux_dir is where install-sh is found. 63AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ 64MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ 65LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ 66AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ 67objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ 68deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \ 69${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ 70$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \ 71|| AC_MSG_ERROR([libtool configure failed]) 72 73# Reload cache, that may have been modified by ltconfig 74AC_CACHE_LOAD 75 76# This can be used to rebuild libtool when needed 77LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh" 78 79# Always use our own libtool. 80LIBTOOL='$(SHELL) $(top_builddir)/libtool' 81AC_SUBST(LIBTOOL)dnl 82 83# Redirect the config.log output again, so that the ltconfig log is not 84# clobbered by the next message. 85exec 5>>./config.log 86]) 87 88AC_DEFUN([AC_LIBTOOL_SETUP], 89[AC_PREREQ(2.13)dnl 90AC_REQUIRE([AC_ENABLE_SHARED])dnl 91AC_REQUIRE([AC_ENABLE_STATIC])dnl 92AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl 93AC_REQUIRE([AC_CANONICAL_HOST])dnl 94AC_REQUIRE([AC_CANONICAL_BUILD])dnl 95AC_REQUIRE([AC_PROG_CC])dnl 96AC_REQUIRE([AC_PROG_LD])dnl 97AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl 98AC_REQUIRE([AC_PROG_NM])dnl 99AC_REQUIRE([AC_PROG_LN_S])dnl 100AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl 101# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! 102AC_REQUIRE([AC_OBJEXT])dnl 103AC_REQUIRE([AC_EXEEXT])dnl 104dnl 105 106# Only perform the check for file, if the check method requires it 107case $deplibs_check_method in 108file_magic*) 109 if test "$file_magic_cmd" = '$MAGIC_CMD'; then 110 AC_PATH_MAGIC 111 fi 112 ;; 113esac 114 115AC_CHECK_TOOL(RANLIB, ranlib, :) 116AC_CHECK_TOOL(STRIP, strip, :) 117 118# Check for any special flags to pass to ltconfig. 119libtool_flags="--cache-file=$cache_file" 120test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" 121test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" 122test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" 123test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc" 124test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" 125ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], 126[libtool_flags="$libtool_flags --enable-dlopen"]) 127ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], 128[libtool_flags="$libtool_flags --enable-win32-dll"]) 129AC_ARG_ENABLE(libtool-lock, 130 [ --disable-libtool-lock avoid locking (might break parallel builds)]) 131test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" 132test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" 133 134AC_ARG_WITH(pic, 135 [ --with-pic try to use only PIC/non-PIC objects [default=use both]], 136 pic_mode="$withval", pic_mode=default) 137test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic" 138test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" 139 140# Some flags need to be propagated to the compiler or linker for good 141# libtool support. 142case $host in 143*-*-irix6*) 144 # Find out which ABI we are using. 145 echo '[#]line __oline__ "configure"' > conftest.$ac_ext 146 if AC_TRY_EVAL(ac_compile); then 147 case `/usr/bin/file conftest.$ac_objext` in 148 *32-bit*) 149 LD="${LD-ld} -32" 150 ;; 151 *N32*) 152 LD="${LD-ld} -n32" 153 ;; 154 *64-bit*) 155 LD="${LD-ld} -64" 156 ;; 157 esac 158 fi 159 rm -rf conftest* 160 ;; 161 162*-*-sco3.2v5*) 163 # On SCO OpenServer 5, we need -belf to get full-featured binaries. 164 SAVE_CFLAGS="$CFLAGS" 165 CFLAGS="$CFLAGS -belf" 166 AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, 167 [AC_LANG_SAVE 168 AC_LANG_C 169 AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) 170 AC_LANG_RESTORE]) 171 if test x"$lt_cv_cc_needs_belf" != x"yes"; then 172 # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf 173 CFLAGS="$SAVE_CFLAGS" 174 fi 175 ;; 176 177ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], 178[*-*-cygwin* | *-*-mingw* | *-*-pw32*) 179 AC_CHECK_TOOL(DLLTOOL, dlltool, false) 180 AC_CHECK_TOOL(AS, as, false) 181 AC_CHECK_TOOL(OBJDUMP, objdump, false) 182 183 # recent cygwin and mingw systems supply a stub DllMain which the user 184 # can override, but on older systems we have to supply one 185 AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, 186 [AC_TRY_LINK([], 187 [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); 188 DllMain (0, 0, 0);], 189 [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) 190 191 case $host/$CC in 192 *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) 193 # old mingw systems require "-dll" to link a DLL, while more recent ones 194 # require "-mdll" 195 SAVE_CFLAGS="$CFLAGS" 196 CFLAGS="$CFLAGS -mdll" 197 AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, 198 [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) 199 CFLAGS="$SAVE_CFLAGS" ;; 200 *-*-cygwin* | *-*-pw32*) 201 # cygwin systems need to pass --dll to the linker, and not link 202 # crt.o which will require a WinMain@16 definition. 203 lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; 204 esac 205 ;; 206 ]) 207esac 208]) 209 210# AC_LIBTOOL_DLOPEN - enable checks for dlopen support 211AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) 212 213# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's 214AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) 215 216# AC_ENABLE_SHARED - implement the --enable-shared flag 217# Usage: AC_ENABLE_SHARED[(DEFAULT)] 218# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to 219# `yes'. 220AC_DEFUN([AC_ENABLE_SHARED], 221[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl 222AC_ARG_ENABLE(shared, 223changequote(<<, >>)dnl 224<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], 225changequote([, ])dnl 226[p=${PACKAGE-default} 227case $enableval in 228yes) enable_shared=yes ;; 229no) enable_shared=no ;; 230*) 231 enable_shared=no 232 # Look at the argument we got. We use all the common list separators. 233 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," 234 for pkg in $enableval; do 235 if test "X$pkg" = "X$p"; then 236 enable_shared=yes 237 fi 238 done 239 IFS="$ac_save_ifs" 240 ;; 241esac], 242enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl 243]) 244 245# AC_DISABLE_SHARED - set the default shared flag to --disable-shared 246AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl 247AC_ENABLE_SHARED(no)]) 248 249# AC_ENABLE_STATIC - implement the --enable-static flag 250# Usage: AC_ENABLE_STATIC[(DEFAULT)] 251# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to 252# `yes'. 253AC_DEFUN([AC_ENABLE_STATIC], 254[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl 255AC_ARG_ENABLE(static, 256changequote(<<, >>)dnl 257<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], 258changequote([, ])dnl 259[p=${PACKAGE-default} 260case $enableval in 261yes) enable_static=yes ;; 262no) enable_static=no ;; 263*) 264 enable_static=no 265 # Look at the argument we got. We use all the common list separators. 266 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," 267 for pkg in $enableval; do 268 if test "X$pkg" = "X$p"; then 269 enable_static=yes 270 fi 271 done 272 IFS="$ac_save_ifs" 273 ;; 274esac], 275enable_static=AC_ENABLE_STATIC_DEFAULT)dnl 276]) 277 278# AC_DISABLE_STATIC - set the default static flag to --disable-static 279AC_DEFUN([AC_DISABLE_STATIC], 280[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl 281AC_ENABLE_STATIC(no)]) 282 283 284# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag 285# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] 286# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to 287# `yes'. 288AC_DEFUN([AC_ENABLE_FAST_INSTALL], 289[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl 290AC_ARG_ENABLE(fast-install, 291changequote(<<, >>)dnl 292<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], 293changequote([, ])dnl 294[p=${PACKAGE-default} 295case $enableval in 296yes) enable_fast_install=yes ;; 297no) enable_fast_install=no ;; 298*) 299 enable_fast_install=no 300 # Look at the argument we got. We use all the common list separators. 301 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," 302 for pkg in $enableval; do 303 if test "X$pkg" = "X$p"; then 304 enable_fast_install=yes 305 fi 306 done 307 IFS="$ac_save_ifs" 308 ;; 309esac], 310enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl 311]) 312 313# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install 314AC_DEFUN([AC_DISABLE_FAST_INSTALL], 315[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl 316AC_ENABLE_FAST_INSTALL(no)]) 317 318# AC_LIBTOOL_PICMODE - implement the --with-pic flag 319# Usage: AC_LIBTOOL_PICMODE[(MODE)] 320# Where MODE is either `yes' or `no'. If omitted, it defaults to 321# `both'. 322AC_DEFUN([AC_LIBTOOL_PICMODE], 323[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl 324pic_mode=ifelse($#,1,$1,default)]) 325 326 327# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library 328AC_DEFUN([AC_PATH_TOOL_PREFIX], 329[AC_MSG_CHECKING([for $1]) 330AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, 331[case $MAGIC_CMD in 332 /*) 333 lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. 334 ;; 335 ?:/*) 336 lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. 337 ;; 338 *) 339 ac_save_MAGIC_CMD="$MAGIC_CMD" 340 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" 341dnl $ac_dummy forces splitting on constant user-supplied paths. 342dnl POSIX.2 word splitting is done only on the output of word expansions, 343dnl not every word. This closes a longstanding sh security hole. 344 ac_dummy="ifelse([$2], , $PATH, [$2])" 345 for ac_dir in $ac_dummy; do 346 test -z "$ac_dir" && ac_dir=. 347 if test -f $ac_dir/$1; then 348 lt_cv_path_MAGIC_CMD="$ac_dir/$1" 349 if test -n "$file_magic_test_file"; then 350 case $deplibs_check_method in 351 "file_magic "*) 352 file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" 353 MAGIC_CMD="$lt_cv_path_MAGIC_CMD" 354 if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | 355 egrep "$file_magic_regex" > /dev/null; then 356 : 357 else 358 cat <<EOF 1>&2 359 360*** Warning: the command libtool uses to detect shared libraries, 361*** $file_magic_cmd, produces output that libtool cannot recognize. 362*** The result is that libtool may fail to recognize shared libraries 363*** as such. This will affect the creation of libtool libraries that 364*** depend on shared libraries, but programs linked with such libtool 365*** libraries will work regardless of this problem. Nevertheless, you 366*** may want to report the problem to your system manager and/or to 367*** bug-libtool@gnu.org 368 369EOF 370 fi ;; 371 esac 372 fi 373 break 374 fi 375 done 376 IFS="$ac_save_ifs" 377 MAGIC_CMD="$ac_save_MAGIC_CMD" 378 ;; 379esac]) 380MAGIC_CMD="$lt_cv_path_MAGIC_CMD" 381if test -n "$MAGIC_CMD"; then 382 AC_MSG_RESULT($MAGIC_CMD) 383else 384 AC_MSG_RESULT(no) 385fi 386]) 387 388 389# AC_PATH_MAGIC - find a file program which can recognise a shared library 390AC_DEFUN([AC_PATH_MAGIC], 391[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl 392AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH) 393if test -z "$lt_cv_path_MAGIC_CMD"; then 394 if test -n "$ac_tool_prefix"; then 395 AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH) 396 else 397 MAGIC_CMD=: 398 fi 399fi 400]) 401 402 403# AC_PROG_LD - find the path to the GNU or non-GNU linker 404AC_DEFUN([AC_PROG_LD], 405[AC_ARG_WITH(gnu-ld, 406[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], 407test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) 408AC_REQUIRE([AC_PROG_CC])dnl 409AC_REQUIRE([AC_CANONICAL_HOST])dnl 410AC_REQUIRE([AC_CANONICAL_BUILD])dnl 411ac_prog=ld 412if test "$GCC" = yes; then 413 # Check if gcc -print-prog-name=ld gives a path. 414 AC_MSG_CHECKING([for ld used by GCC]) 415 case $host in 416 *-*-mingw*) 417 # gcc leaves a trailing carriage return which upsets mingw 418 ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; 419 *) 420 ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; 421 esac 422 case $ac_prog in 423 # Accept absolute paths. 424 [[\\/]* | [A-Za-z]:[\\/]*)] 425 re_direlt=['/[^/][^/]*/\.\./'] 426 # Canonicalize the path of ld 427 ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` 428 while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do 429 ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` 430 done 431 test -z "$LD" && LD="$ac_prog" 432 ;; 433 "") 434 # If it fails, then pretend we aren't using GCC. 435 ac_prog=ld 436 ;; 437 *) 438 # If it is relative, then search for the first ld in PATH. 439 with_gnu_ld=unknown 440 ;; 441 esac 442elif test "$with_gnu_ld" = yes; then 443 AC_MSG_CHECKING([for GNU ld]) 444else 445 AC_MSG_CHECKING([for non-GNU ld]) 446fi 447AC_CACHE_VAL(lt_cv_path_LD, 448[if test -z "$LD"; then 449 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" 450 for ac_dir in $PATH; do 451 test -z "$ac_dir" && ac_dir=. 452 if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then 453 lt_cv_path_LD="$ac_dir/$ac_prog" 454 # Check to see if the program is GNU ld. I'd rather use --version, 455 # but apparently some GNU ld's only accept -v. 456 # Break only if it was the GNU/non-GNU ld that we prefer. 457 if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then 458 test "$with_gnu_ld" != no && break 459 else 460 test "$with_gnu_ld" != yes && break 461 fi 462 fi 463 done 464 IFS="$ac_save_ifs" 465else 466 lt_cv_path_LD="$LD" # Let the user override the test with a path. 467fi]) 468LD="$lt_cv_path_LD" 469if test -n "$LD"; then 470 AC_MSG_RESULT($LD) 471else 472 AC_MSG_RESULT(no) 473fi 474test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) 475AC_PROG_LD_GNU 476]) 477 478AC_DEFUN([AC_PROG_LD_GNU], 479[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, 480[# I'd rather use --version here, but apparently some GNU ld's only accept -v. 481if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then 482 lt_cv_prog_gnu_ld=yes 483else 484 lt_cv_prog_gnu_ld=no 485fi]) 486with_gnu_ld=$lt_cv_prog_gnu_ld 487]) 488 489# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker 490# -- PORTME Some linkers may need a different reload flag. 491AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], 492[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag, 493[lt_cv_ld_reload_flag='-r']) 494reload_flag=$lt_cv_ld_reload_flag 495test -n "$reload_flag" && reload_flag=" $reload_flag" 496]) 497 498# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies 499# -- PORTME fill in with the dynamic library characteristics 500AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], 501[AC_CACHE_CHECK([how to recognise dependant libraries], 502lt_cv_deplibs_check_method, 503[lt_cv_file_magic_cmd='$MAGIC_CMD' 504lt_cv_file_magic_test_file= 505lt_cv_deplibs_check_method='unknown' 506# Need to set the preceding variable on all platforms that support 507# interlibrary dependencies. 508# 'none' -- dependencies not supported. 509# `unknown' -- same as none, but documents that we really don't know. 510# 'pass_all' -- all dependencies passed with no checks. 511# 'test_compile' -- check by making test program. 512# 'file_magic [regex]' -- check by looking for files in library path 513# which responds to the $file_magic_cmd with a given egrep regex. 514# If you have `file' or equivalent on your system and you're not sure 515# whether `pass_all' will *always* work, you probably want this one. 516 517case $host_os in 518aix*) 519 lt_cv_deplibs_check_method=pass_all 520 ;; 521 522beos*) 523 lt_cv_deplibs_check_method=pass_all 524 ;; 525 526bsdi4*) 527 lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'] 528 lt_cv_file_magic_cmd='/usr/bin/file -L' 529 lt_cv_file_magic_test_file=/shlib/libc.so 530 ;; 531 532cygwin* | mingw* |pw32*) 533 lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' 534 lt_cv_file_magic_cmd='$OBJDUMP -f' 535 ;; 536 537darwin* | rhapsody*) 538 lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' 539 lt_cv_file_magic_cmd='/usr/bin/file -L' 540 case "$host_os" in 541 rhapsody* | darwin1.[012]) 542 lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System' 543 ;; 544 *) # Darwin 1.3 on 545 lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' 546 ;; 547 esac 548 ;; 549 550freebsd* ) 551 if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then 552 case $host_cpu in 553 i*86 ) 554 # Not sure whether the presence of OpenBSD here was a mistake. 555 # Let's accept both of them until this is cleared up. 556 lt_cv_deplibs_check_method=['file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'] 557 lt_cv_file_magic_cmd=/usr/bin/file 558 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` 559 ;; 560 esac 561 else 562 lt_cv_deplibs_check_method=pass_all 563 fi 564 ;; 565 566gnu*) 567 lt_cv_deplibs_check_method=pass_all 568 ;; 569 570hpux10.20*|hpux11*) 571 lt_cv_deplibs_check_method=['file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'] 572 lt_cv_file_magic_cmd=/usr/bin/file 573 lt_cv_file_magic_test_file=/usr/lib/libc.sl 574 ;; 575 576irix5* | irix6*) 577 case $host_os in 578 irix5*) 579 # this will be overridden with pass_all, but let us keep it just in case 580 lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" 581 ;; 582 *) 583 case $LD in 584 *-32|*"-32 ") libmagic=32-bit;; 585 *-n32|*"-n32 ") libmagic=N32;; 586 *-64|*"-64 ") libmagic=64-bit;; 587 *) libmagic=never-match;; 588 esac 589 # this will be overridden with pass_all, but let us keep it just in case 590 lt_cv_deplibs_check_method=["file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"] 591 ;; 592 esac 593 lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` 594 lt_cv_deplibs_check_method=pass_all 595 ;; 596 597# This must be Linux ELF. 598linux*) 599 case $host_cpu in 600 alpha* | i*86 | powerpc* | sparc* | ia64* | s390* | m68k* | arm* | mips* | hppa* | sh* ) 601 lt_cv_deplibs_check_method=pass_all ;; 602 *) 603 # glibc up to 2.1.1 does not perform some relocations on ARM 604 lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] ;; 605 esac 606 lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` 607 ;; 608 609netbsd*) 610 if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then 611 [lt_cv_deplibs_check_method='file_magic NetBSD/[a-z0-9]* demand paged shared library'] 612 else 613 [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'] 614 fi 615 lt_cv_file_magic_cmd='/usr/bin/file -L' 616 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` 617 ;; 618 619openbsd* ) 620 if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then 621 case "$host_cpu" in 622 i*86 ) 623 changequote(,)dnl 624 lt_cv_deplibs_check_method='file_magic OpenBSD/i[3-9]86 demand paged shared library' 625 changequote([, ])dnl 626 lt_cv_file_magic_cmd=/usr/bin/file 627 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` 628 ;; 629 esac 630 else 631 lt_cv_deplibs_check_method=pass_all 632 fi 633 ;; 634 635newsos6) 636 [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'] 637 lt_cv_file_magic_cmd=/usr/bin/file 638 lt_cv_file_magic_test_file=/usr/lib/libnls.so 639 ;; 640 641osf3* | osf4* | osf5*) 642 # this will be overridden with pass_all, but let us keep it just in case 643 lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' 644 lt_cv_file_magic_test_file=/shlib/libc.so 645 lt_cv_deplibs_check_method=pass_all 646 ;; 647 648sco3.2v5*) 649 lt_cv_deplibs_check_method=pass_all 650 ;; 651 652solaris*) 653 lt_cv_deplibs_check_method=pass_all 654 lt_cv_file_magic_test_file=/lib/libc.so 655 ;; 656 657sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) 658 case $host_vendor in 659 ncr) 660 lt_cv_deplibs_check_method=pass_all 661 ;; 662 motorola) 663 lt_cv_deplibs_check_method=['file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'] 664 lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` 665 ;; 666 esac 667 ;; 668esac 669]) 670file_magic_cmd=$lt_cv_file_magic_cmd 671deplibs_check_method=$lt_cv_deplibs_check_method 672]) 673 674 675# AC_PROG_NM - find the path to a BSD-compatible name lister 676AC_DEFUN([AC_PROG_NM], 677[AC_MSG_CHECKING([for BSD-compatible nm]) 678AC_CACHE_VAL(lt_cv_path_NM, 679[if test -n "$NM"; then 680 # Let the user override the test. 681 lt_cv_path_NM="$NM" 682else 683 IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" 684 for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do 685 test -z "$ac_dir" && ac_dir=. 686 tmp_nm=$ac_dir/${ac_tool_prefix}nm 687 if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then 688 # Check to see if the nm accepts a BSD-compat flag. 689 # Adding the `sed 1q' prevents false positives on HP-UX, which says: 690 # nm: unknown option "B" ignored 691 # Tru64's nm complains that /dev/null is an invalid object file 692 if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then 693 lt_cv_path_NM="$tmp_nm -B" 694 break 695 elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then 696 lt_cv_path_NM="$tmp_nm -p" 697 break 698 else 699 lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but 700 continue # so that we can try to find one that supports BSD flags 701 fi 702 fi 703 done 704 IFS="$ac_save_ifs" 705 test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm 706fi]) 707NM="$lt_cv_path_NM" 708AC_MSG_RESULT([$NM]) 709]) 710 711# AC_CHECK_LIBM - check for math library 712AC_DEFUN([AC_CHECK_LIBM], 713[AC_REQUIRE([AC_CANONICAL_HOST])dnl 714LIBM= 715case $host in 716*-*-beos* | *-*-cygwin* | *-*-pw32*) 717 # These system don't have libm 718 ;; 719*-ncr-sysv4.3*) 720 AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") 721 AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") 722 ;; 723*) 724 AC_CHECK_LIB(m, main, LIBM="-lm") 725 ;; 726esac 727]) 728 729# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for 730# the libltdl convenience library and INCLTDL to the include flags for 731# the libltdl header and adds --enable-ltdl-convenience to the 732# configure arguments. Note that LIBLTDL and INCLTDL are not 733# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not 734# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed 735# with '${top_builddir}/' and INCLTDL will be prefixed with 736# '${top_srcdir}/' (note the single quotes!). If your package is not 737# flat and you're not using automake, define top_builddir and 738# top_srcdir appropriately in the Makefiles. 739AC_DEFUN([AC_LIBLTDL_CONVENIENCE], 740[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl 741 case $enable_ltdl_convenience in 742 no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; 743 "") enable_ltdl_convenience=yes 744 ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; 745 esac 746 LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la 747 INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) 748]) 749 750# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for 751# the libltdl installable library and INCLTDL to the include flags for 752# the libltdl header and adds --enable-ltdl-install to the configure 753# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is 754# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed 755# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will 756# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed 757# with '${top_srcdir}/' (note the single quotes!). If your package is 758# not flat and you're not using automake, define top_builddir and 759# top_srcdir appropriately in the Makefiles. 760# In the future, this macro may have to be called after AC_PROG_LIBTOOL. 761AC_DEFUN([AC_LIBLTDL_INSTALLABLE], 762[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl 763 AC_CHECK_LIB(ltdl, main, 764 [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], 765 [if test x"$enable_ltdl_install" = xno; then 766 AC_MSG_WARN([libltdl not installed, but installation disabled]) 767 else 768 enable_ltdl_install=yes 769 fi 770 ]) 771 if test x"$enable_ltdl_install" = x"yes"; then 772 ac_configure_args="$ac_configure_args --enable-ltdl-install" 773 LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la 774 INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) 775 else 776 ac_configure_args="$ac_configure_args --enable-ltdl-install=no" 777 LIBLTDL="-lltdl" 778 INCLTDL= 779 fi 780]) 781 782# If this macro is not defined by Autoconf, define it here. 783ifdef([AC_PROVIDE_IFELSE], 784 [], 785 [define([AC_PROVIDE_IFELSE], 786 [ifdef([AC_PROVIDE_$1], 787 [$2], [$3])])]) 788 789# AC_LIBTOOL_CXX - enable support for C++ libraries 790AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_AC_LIBTOOL_CXX])]) 791 792AC_DEFUN([_AC_LIBTOOL_CXX], 793[AC_REQUIRE([AC_PROG_CXX]) 794AC_REQUIRE([AC_PROG_CXXCPP]) 795LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh" 796lt_save_CC="$CC" 797lt_save_CFLAGS="$CFLAGS" 798dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC 799dnl is set to the C++ compiler. 800AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \ 801MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ 802LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ 803AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ 804objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ 805deplibs_check_method="$deplibs_check_method" \ 806file_magic_cmd="$file_magic_cmd" \ 807${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \ 808--build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \ 809|| AC_MSG_ERROR([libtool tag configuration failed]) 810CC="$lt_save_CC" 811CFLAGS="$lt_save_CFLAGS" 812 813# Redirect the config.log output again, so that the ltconfig log is not 814# clobbered by the next message. 815exec 5>>./config.log 816]) 817 818# AC_LIBTOOL_GCJ - enable support for GCJ libraries 819AC_DEFUN([AC_LIBTOOL_GCJ],[AC_REQUIRE([_AC_LIBTOOL_GCJ])]) 820 821AC_DEFUN([_AC_LIBTOOL_GCJ], 822[AC_REQUIRE([AC_PROG_LIBTOOL]) 823AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], 824 [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], 825 [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], 826 [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], 827 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], 828 [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) 829LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh" 830lt_save_CC="$CC" 831lt_save_CFLAGS="$CFLAGS" 832dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC 833dnl is set to the C++ compiler. 834AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="$CPPFLAGS" \ 835MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ 836LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ 837AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ 838objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ 839deplibs_check_method="$deplibs_check_method" \ 840file_magic_cmd="$file_magic_cmd" \ 841${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \ 842--build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \ 843|| AC_MSG_ERROR([libtool tag configuration failed]) 844CC="$lt_save_CC" 845CFLAGS="$lt_save_CFLAGS" 846 847# Redirect the config.log output again, so that the ltconfig log is not 848# clobbered by the next message. 849exec 5>>./config.log 850]) 851 852dnl old names 853AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) 854AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) 855AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) 856AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) 857AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) 858AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) 859AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) 860 861dnl This is just to silence aclocal about the macro not being used 862ifelse([AC_DISABLE_FAST_INSTALL])dnl 863 864AC_DEFUN([LT_AC_PROG_GCJ], 865[AC_CHECK_TOOL(GCJ, gcj, no) 866 test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" 867 AC_SUBST(GCJFLAGS) 868]) 869