1# Makefile.in generated by automake 1.11.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 5# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, 6# Inc. 7# This Makefile.in is free software; the Free Software Foundation 8# gives unlimited permission to copy and/or distribute it, 9# with or without modifications, as long as this notice is preserved. 10 11# This program is distributed in the hope that it will be useful, 12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 14# PARTICULAR PURPOSE. 15 16@SET_MAKE@ 17 18# Copyright (c) 1994 - 2010, Lawrence Livermore National Security, LLC. 19# LLNL-CODE-425250. 20# All rights reserved. 21# 22# This file is part of Silo. For details, see silo.llnl.gov. 23# 24# Redistribution and use in source and binary forms, with or without 25# modification, are permitted provided that the following conditions 26# are met: 27# 28# * Redistributions of source code must retain the above copyright 29# notice, this list of conditions and the disclaimer below. 30# * Redistributions in binary form must reproduce the above copyright 31# notice, this list of conditions and the disclaimer (as noted 32# below) in the documentation and/or other materials provided with 33# the distribution. 34# * Neither the name of the LLNS/LLNL nor the names of its 35# contributors may be used to endorse or promote products derived 36# from this software without specific prior written permission. 37# 38# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 39# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 40# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 41# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL LAWRENCE 42# LIVERMORE NATIONAL SECURITY, LLC, THE U.S. DEPARTMENT OF ENERGY OR 43# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 44# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 45# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 46# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 47# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 48# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 49# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 50# 51# This work was produced at Lawrence Livermore National Laboratory under 52# Contract No. DE-AC52-07NA27344 with the DOE. 53# 54# Neither the United States Government nor Lawrence Livermore National 55# Security, LLC nor any of their employees, makes any warranty, express 56# or implied, or assumes any liability or responsibility for the 57# accuracy, completeness, or usefulness of any information, apparatus, 58# product, or process disclosed, or represents that its use would not 59# infringe privately-owned rights. 60# 61# Any reference herein to any specific commercial products, process, or 62# services by trade name, trademark, manufacturer or otherwise does not 63# necessarily constitute or imply its endorsement, recommendation, or 64# favoring by the United States Government or Lawrence Livermore 65# National Security, LLC. The views and opinions of authors expressed 66# herein do not necessarily state or reflect those of the United States 67# Government or Lawrence Livermore National Security, LLC, and shall not 68# be used for advertising or product endorsement purposes. 69# 70VPATH = @srcdir@ 71pkgdatadir = $(datadir)/@PACKAGE@ 72pkgincludedir = $(includedir)/@PACKAGE@ 73pkglibdir = $(libdir)/@PACKAGE@ 74pkglibexecdir = $(libexecdir)/@PACKAGE@ 75am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 76install_sh_DATA = $(install_sh) -c -m 644 77install_sh_PROGRAM = $(install_sh) -c 78install_sh_SCRIPT = $(install_sh) -c 79INSTALL_HEADER = $(INSTALL_DATA) 80transform = $(program_transform_name) 81NORMAL_INSTALL = : 82PRE_INSTALL = : 83POST_INSTALL = : 84NORMAL_UNINSTALL = : 85PRE_UNINSTALL = : 86POST_UNINSTALL = : 87build_triplet = @build@ 88host_triplet = @host@ 89subdir = config-site 90DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in 91ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 92am__aclocal_m4_deps = $(top_srcdir)/config/ax_check_compiler_flags.m4 \ 93 $(top_srcdir)/config/ax_have_qt.m4 \ 94 $(top_srcdir)/config/libtool.m4 \ 95 $(top_srcdir)/config/ltoptions.m4 \ 96 $(top_srcdir)/config/ltsugar.m4 \ 97 $(top_srcdir)/config/ltversion.m4 \ 98 $(top_srcdir)/config/lt~obsolete.m4 \ 99 $(top_srcdir)/config/vl_lib_readline.m4 \ 100 $(top_srcdir)/configure.ac 101am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 102 $(ACLOCAL_M4) 103mkinstalldirs = $(install_sh) -d 104CONFIG_HEADER = $(top_builddir)/config.h 105CONFIG_CLEAN_FILES = 106CONFIG_CLEAN_VPATH_FILES = 107SOURCES = 108DIST_SOURCES = 109DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 110ACLOCAL = @ACLOCAL@ 111AMTAR = @AMTAR@ 112AR = @AR@ 113AUTOCONF = @AUTOCONF@ 114AUTOHEADER = @AUTOHEADER@ 115AUTOMAKE = @AUTOMAKE@ 116AWK = @AWK@ 117BROWSER = @BROWSER@ 118BUNDLE_TARGET = @BUNDLE_TARGET@ 119CC = @CC@ 120CCDEPMODE = @CCDEPMODE@ 121CC_FULLPATH = @CC_FULLPATH@ 122CFLAGS = @CFLAGS@ 123CONFIG_CMD = @CONFIG_CMD@ 124CONFIG_DATE = @CONFIG_DATE@ 125CONFIG_USER = @CONFIG_USER@ 126CPP = @CPP@ 127CPPFLAGS = @CPPFLAGS@ 128CXX = @CXX@ 129CXXCPP = @CXXCPP@ 130CXXDEPMODE = @CXXDEPMODE@ 131CXXFLAGS = @CXXFLAGS@ 132CXX_FULLPATH = @CXX_FULLPATH@ 133CYGPATH_W = @CYGPATH_W@ 134DEFS = @DEFS@ 135DEPDIR = @DEPDIR@ 136DSYMUTIL = @DSYMUTIL@ 137DUMPBIN = @DUMPBIN@ 138ECHO_C = @ECHO_C@ 139ECHO_N = @ECHO_N@ 140ECHO_T = @ECHO_T@ 141EGREP = @EGREP@ 142EXEEXT = @EXEEXT@ 143F77 = @F77@ 144FC = @FC@ 145FCFLAGS = @FCFLAGS@ 146FCLIBS = @FCLIBS@ 147FC_FULLPATH = @FC_FULLPATH@ 148FFLAGS = @FFLAGS@ 149FGREP = @FGREP@ 150FORTRAN = @FORTRAN@ 151FPZIP = @FPZIP@ 152GREP = @GREP@ 153HDF5_DRV = @HDF5_DRV@ 154HZIP = @HZIP@ 155INSTALL = @INSTALL@ 156INSTALL_DATA = @INSTALL_DATA@ 157INSTALL_PROGRAM = @INSTALL_PROGRAM@ 158INSTALL_SCRIPT = @INSTALL_SCRIPT@ 159INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 160JSON = @JSON@ 161LD = @LD@ 162LDFLAGS = @LDFLAGS@ 163LIBM = @LIBM@ 164LIBOBJS = @LIBOBJS@ 165LIBS = @LIBS@ 166LIBTOOL = @LIBTOOL@ 167LIPO = @LIPO@ 168LN_S = @LN_S@ 169LTLIBOBJS = @LTLIBOBJS@ 170MAINT = @MAINT@ 171MAKEINFO = @MAKEINFO@ 172MKDIR_P = @MKDIR_P@ 173NETCDF = @NETCDF@ 174NM = @NM@ 175NMEDIT = @NMEDIT@ 176OBJDUMP = @OBJDUMP@ 177OBJEXT = @OBJEXT@ 178OTOOL = @OTOOL@ 179OTOOL64 = @OTOOL64@ 180PACKAGE = @PACKAGE@ 181PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 182PACKAGE_NAME = @PACKAGE_NAME@ 183PACKAGE_STRING = @PACKAGE_STRING@ 184PACKAGE_TARNAME = @PACKAGE_TARNAME@ 185PACKAGE_VERSION = @PACKAGE_VERSION@ 186PATH_SEPARATOR = @PATH_SEPARATOR@ 187PDBP_DRV = @PDBP_DRV@ 188PDB_DRV = @PDB_DRV@ 189PYTHON = @PYTHON@ 190PYTHONMODULE = @PYTHONMODULE@ 191PYTHON_CPPFLAGS = @PYTHON_CPPFLAGS@ 192PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@ 193PYTHON_PLATFORM = @PYTHON_PLATFORM@ 194PYTHON_PREFIX = @PYTHON_PREFIX@ 195PYTHON_VERSION = @PYTHON_VERSION@ 196QT_CXXFLAGS = @QT_CXXFLAGS@ 197QT_DIR = @QT_DIR@ 198QT_LIBS = @QT_LIBS@ 199QT_LRELEASE = @QT_LRELEASE@ 200QT_LUPDATE = @QT_LUPDATE@ 201QT_MOC = @QT_MOC@ 202QT_UIC = @QT_UIC@ 203RANLIB = @RANLIB@ 204READLINE_LIBS = @READLINE_LIBS@ 205SED = @SED@ 206SET_MAKE = @SET_MAKE@ 207SHELL = @SHELL@ 208SILEX = @SILEX@ 209SILO_VERS_MAJ = @SILO_VERS_MAJ@ 210SILO_VERS_MIN = @SILO_VERS_MIN@ 211SILO_VERS_PAT = @SILO_VERS_PAT@ 212SILO_VERS_PRE = @SILO_VERS_PRE@ 213SILO_VERS_TAG = @SILO_VERS_TAG@ 214STRIP = @STRIP@ 215TAURUS = @TAURUS@ 216VERSION = @VERSION@ 217XMKMF = @XMKMF@ 218X_CFLAGS = @X_CFLAGS@ 219X_EXTRA_LIBS = @X_EXTRA_LIBS@ 220X_LIBS = @X_LIBS@ 221X_PRE_LIBS = @X_PRE_LIBS@ 222ZLIB = @ZLIB@ 223abs_builddir = @abs_builddir@ 224abs_srcdir = @abs_srcdir@ 225abs_top_builddir = @abs_top_builddir@ 226abs_top_srcdir = @abs_top_srcdir@ 227ac_ct_CC = @ac_ct_CC@ 228ac_ct_CXX = @ac_ct_CXX@ 229ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 230ac_ct_F77 = @ac_ct_F77@ 231ac_ct_FC = @ac_ct_FC@ 232am__include = @am__include@ 233am__leading_dot = @am__leading_dot@ 234am__quote = @am__quote@ 235am__tar = @am__tar@ 236am__untar = @am__untar@ 237bindir = @bindir@ 238build = @build@ 239build_alias = @build_alias@ 240build_cpu = @build_cpu@ 241build_os = @build_os@ 242build_vendor = @build_vendor@ 243builddir = @builddir@ 244datadir = @datadir@ 245datarootdir = @datarootdir@ 246docdir = @docdir@ 247dvidir = @dvidir@ 248exec_prefix = @exec_prefix@ 249host = @host@ 250host_alias = @host_alias@ 251host_cpu = @host_cpu@ 252host_os = @host_os@ 253host_vendor = @host_vendor@ 254htmldir = @htmldir@ 255includedir = @includedir@ 256infodir = @infodir@ 257install_sh = @install_sh@ 258libdir = @libdir@ 259libexecdir = @libexecdir@ 260localedir = @localedir@ 261localstatedir = @localstatedir@ 262lt_ECHO = @lt_ECHO@ 263mandir = @mandir@ 264mkdir_p = @mkdir_p@ 265oldincludedir = @oldincludedir@ 266pdfdir = @pdfdir@ 267pkgpyexecdir = @pkgpyexecdir@ 268pkgpythondir = @pkgpythondir@ 269prefix = @prefix@ 270program_transform_name = @program_transform_name@ 271psdir = @psdir@ 272pyexecdir = @pyexecdir@ 273pythondir = @pythondir@ 274sbindir = @sbindir@ 275sharedstatedir = @sharedstatedir@ 276srcdir = @srcdir@ 277sysconfdir = @sysconfdir@ 278target_alias = @target_alias@ 279top_build_prefix = @top_build_prefix@ 280top_builddir = @top_builddir@ 281top_srcdir = @top_srcdir@ 282EXTRA_DIST = *.conf 283all: all-am 284 285.SUFFIXES: 286$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) 287 @for dep in $?; do \ 288 case '$(am__configure_deps)' in \ 289 *$$dep*) \ 290 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 291 && { if test -f $@; then exit 0; else break; fi; }; \ 292 exit 1;; \ 293 esac; \ 294 done; \ 295 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign config-site/Makefile'; \ 296 $(am__cd) $(top_srcdir) && \ 297 $(AUTOMAKE) --foreign config-site/Makefile 298.PRECIOUS: Makefile 299Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 300 @case '$?' in \ 301 *config.status*) \ 302 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 303 *) \ 304 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 305 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 306 esac; 307 308$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 309 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 310 311$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 312 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 313$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) 314 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 315$(am__aclocal_m4_deps): 316 317mostlyclean-libtool: 318 -rm -f *.lo 319 320clean-libtool: 321 -rm -rf .libs _libs 322tags: TAGS 323TAGS: 324 325ctags: CTAGS 326CTAGS: 327 328 329distdir: $(DISTFILES) 330 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 331 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 332 list='$(DISTFILES)'; \ 333 dist_files=`for file in $$list; do echo $$file; done | \ 334 sed -e "s|^$$srcdirstrip/||;t" \ 335 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 336 case $$dist_files in \ 337 */*) $(MKDIR_P) `echo "$$dist_files" | \ 338 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 339 sort -u` ;; \ 340 esac; \ 341 for file in $$dist_files; do \ 342 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 343 if test -d $$d/$$file; then \ 344 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 345 if test -d "$(distdir)/$$file"; then \ 346 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 347 fi; \ 348 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 349 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 350 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 351 fi; \ 352 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 353 else \ 354 test -f "$(distdir)/$$file" \ 355 || cp -p $$d/$$file "$(distdir)/$$file" \ 356 || exit 1; \ 357 fi; \ 358 done 359 $(MAKE) $(AM_MAKEFLAGS) \ 360 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 361 dist-hook 362check-am: all-am 363check: check-am 364all-am: Makefile 365installdirs: 366install: install-am 367install-exec: install-exec-am 368install-data: install-data-am 369uninstall: uninstall-am 370 371install-am: all-am 372 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 373 374installcheck: installcheck-am 375install-strip: 376 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 377 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 378 `test -z '$(STRIP)' || \ 379 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install 380mostlyclean-generic: 381 382clean-generic: 383 384distclean-generic: 385 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 386 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 387 388maintainer-clean-generic: 389 @echo "This command is intended for maintainers to use" 390 @echo "it deletes files that may require special tools to rebuild." 391clean: clean-am 392 393clean-am: clean-generic clean-libtool mostlyclean-am 394 395distclean: distclean-am 396 -rm -f Makefile 397distclean-am: clean-am distclean-generic 398 399dvi: dvi-am 400 401dvi-am: 402 403html: html-am 404 405html-am: 406 407info: info-am 408 409info-am: 410 411install-data-am: 412 413install-dvi: install-dvi-am 414 415install-dvi-am: 416 417install-exec-am: 418 419install-html: install-html-am 420 421install-html-am: 422 423install-info: install-info-am 424 425install-info-am: 426 427install-man: 428 429install-pdf: install-pdf-am 430 431install-pdf-am: 432 433install-ps: install-ps-am 434 435install-ps-am: 436 437installcheck-am: 438 439maintainer-clean: maintainer-clean-am 440 -rm -f Makefile 441maintainer-clean-am: distclean-am maintainer-clean-generic 442 443mostlyclean: mostlyclean-am 444 445mostlyclean-am: mostlyclean-generic mostlyclean-libtool 446 447pdf: pdf-am 448 449pdf-am: 450 451ps: ps-am 452 453ps-am: 454 455uninstall-am: 456 457.MAKE: install-am install-strip 458 459.PHONY: all all-am check check-am clean clean-generic clean-libtool \ 460 dist-hook distclean distclean-generic distclean-libtool \ 461 distdir dvi dvi-am html html-am info info-am install \ 462 install-am install-data install-data-am install-dvi \ 463 install-dvi-am install-exec install-exec-am install-html \ 464 install-html-am install-info install-info-am install-man \ 465 install-pdf install-pdf-am install-ps install-ps-am \ 466 install-strip installcheck installcheck-am installdirs \ 467 maintainer-clean maintainer-clean-generic mostlyclean \ 468 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ 469 uninstall uninstall-am 470 471 472# 473# By default, the dist-gzip target (as well as other distribution 474# targets) winds up creating copies of files that are really links 475# instead of preserving the links. I did not find any ways to control 476# the flags Automake uses to do the copy to, for example, ensure a 477# '-d' was included in the 'cp' command to preserve links. I learned 478# from reading AutoMake documentation that you can kinda-sorta do 479# what you want by making special code in the 'dist-hook' target. So, 480# we create that target here to ensure we wind up with a config-site 481# dir where the links between config-site files are preserved. The 482# code below is a based on code generated by Automake for the distdir 483# target, but modified to handle this case. 484# 485dist-hook: 486 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 487 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 488 list='$(DISTFILES)'; \ 489 dist_files=`for file in $$list; do echo $$file; done | \ 490 sed -e "s|^$$srcdirstrip/||;t" \ 491 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 492 for file in $$dist_files; do \ 493 rm -f $(distdir)/$$file; \ 494 cp -pd $(srcdir)/$$file $(distdir)/$$file ;\ 495 done 496 497# Tell versions [3.59,3.63) of GNU make to not export all variables. 498# Otherwise a system limit (for SysV at least) may be exceeded. 499.NOEXPORT: 500