1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17
18VPATH = @srcdir@
19am__is_gnu_make = { \
20  if test -z '$(MAKELEVEL)'; then \
21    false; \
22  elif test -n '$(MAKE_HOST)'; then \
23    true; \
24  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
25    true; \
26  else \
27    false; \
28  fi; \
29}
30am__make_running_with_option = \
31  case $${target_option-} in \
32      ?) ;; \
33      *) echo "am__make_running_with_option: internal error: invalid" \
34              "target option '$${target_option-}' specified" >&2; \
35         exit 1;; \
36  esac; \
37  has_opt=no; \
38  sane_makeflags=$$MAKEFLAGS; \
39  if $(am__is_gnu_make); then \
40    sane_makeflags=$$MFLAGS; \
41  else \
42    case $$MAKEFLAGS in \
43      *\\[\ \	]*) \
44        bs=\\; \
45        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
46          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
47    esac; \
48  fi; \
49  skip_next=no; \
50  strip_trailopt () \
51  { \
52    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
53  }; \
54  for flg in $$sane_makeflags; do \
55    test $$skip_next = yes && { skip_next=no; continue; }; \
56    case $$flg in \
57      *=*|--*) continue;; \
58        -*I) strip_trailopt 'I'; skip_next=yes;; \
59      -*I?*) strip_trailopt 'I';; \
60        -*O) strip_trailopt 'O'; skip_next=yes;; \
61      -*O?*) strip_trailopt 'O';; \
62        -*l) strip_trailopt 'l'; skip_next=yes;; \
63      -*l?*) strip_trailopt 'l';; \
64      -[dEDm]) skip_next=yes;; \
65      -[JT]) skip_next=yes;; \
66    esac; \
67    case $$flg in \
68      *$$target_option*) has_opt=yes; break;; \
69    esac; \
70  done; \
71  test $$has_opt = yes
72am__make_dryrun = (target_option=n; $(am__make_running_with_option))
73am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
74pkgdatadir = $(datadir)/@PACKAGE@
75pkgincludedir = $(includedir)/@PACKAGE@
76pkglibdir = $(libdir)/@PACKAGE@
77pkglibexecdir = $(libexecdir)/@PACKAGE@
78am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
79install_sh_DATA = $(install_sh) -c -m 644
80install_sh_PROGRAM = $(install_sh) -c
81install_sh_SCRIPT = $(install_sh) -c
82INSTALL_HEADER = $(INSTALL_DATA)
83transform = $(program_transform_name)
84NORMAL_INSTALL = :
85PRE_INSTALL = :
86POST_INSTALL = :
87NORMAL_UNINSTALL = :
88PRE_UNINSTALL = :
89POST_UNINSTALL = :
90build_triplet = @build@
91host_triplet = @host@
92subdir = .
93ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
94am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
95	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
96	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
97	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
98	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
99	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
100	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
101	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
102am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
103	$(ACLOCAL_M4)
104DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
105	$(am__configure_deps) $(dist_noinst_SCRIPTS) $(dist_doc_DATA) \
106	$(am__DIST_COMMON)
107am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
108 configure.lineno config.status.lineno
109mkinstalldirs = $(install_sh) -d
110CONFIG_HEADER = config.h
111CONFIG_CLEAN_FILES =
112CONFIG_CLEAN_VPATH_FILES =
113SCRIPTS = $(dist_noinst_SCRIPTS)
114AM_V_P = $(am__v_P_@AM_V@)
115am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
116am__v_P_0 = false
117am__v_P_1 = :
118AM_V_GEN = $(am__v_GEN_@AM_V@)
119am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
120am__v_GEN_0 = @echo "  GEN     " $@;
121am__v_GEN_1 =
122AM_V_at = $(am__v_at_@AM_V@)
123am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
124am__v_at_0 = @
125am__v_at_1 =
126SOURCES =
127DIST_SOURCES =
128RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
129	ctags-recursive dvi-recursive html-recursive info-recursive \
130	install-data-recursive install-dvi-recursive \
131	install-exec-recursive install-html-recursive \
132	install-info-recursive install-pdf-recursive \
133	install-ps-recursive install-recursive installcheck-recursive \
134	installdirs-recursive pdf-recursive ps-recursive \
135	tags-recursive uninstall-recursive
136am__can_run_installinfo = \
137  case $$AM_UPDATE_INFO_DIR in \
138    n|no|NO) false;; \
139    *) (install-info --version) >/dev/null 2>&1;; \
140  esac
141am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
142am__vpath_adj = case $$p in \
143    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
144    *) f=$$p;; \
145  esac;
146am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
147am__install_max = 40
148am__nobase_strip_setup = \
149  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
150am__nobase_strip = \
151  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
152am__nobase_list = $(am__nobase_strip_setup); \
153  for p in $$list; do echo "$$p $$p"; done | \
154  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
155  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
156    if (++n[$$2] == $(am__install_max)) \
157      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
158    END { for (dir in files) print dir, files[dir] }'
159am__base_list = \
160  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
161  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
162am__uninstall_files_from_dir = { \
163  test -z "$$files" \
164    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
165    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
166         $(am__cd) "$$dir" && rm -f $$files; }; \
167  }
168am__installdirs = "$(DESTDIR)$(docdir)"
169DATA = $(dist_doc_DATA)
170RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
171  distclean-recursive maintainer-clean-recursive
172am__recursive_targets = \
173  $(RECURSIVE_TARGETS) \
174  $(RECURSIVE_CLEAN_TARGETS) \
175  $(am__extra_recursive_targets)
176AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
177	cscope distdir dist dist-all distcheck
178am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
179	$(LISP)config.h.in
180# Read a list of newline-separated strings from the standard input,
181# and print each of them once, without duplicates.  Input order is
182# *not* preserved.
183am__uniquify_input = $(AWK) '\
184  BEGIN { nonempty = 0; } \
185  { items[$$0] = 1; nonempty = 1; } \
186  END { if (nonempty) { for (i in items) print i; }; } \
187'
188# Make sure the list of sources is unique.  This is necessary because,
189# e.g., the same source file might be shared among _SOURCES variables
190# for different programs/libraries.
191am__define_uniq_tagged_files = \
192  list='$(am__tagged_files)'; \
193  unique=`for i in $$list; do \
194    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
195  done | $(am__uniquify_input)`
196ETAGS = etags
197CTAGS = ctags
198CSCOPE = cscope
199DIST_SUBDIRS = $(SUBDIRS)
200am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
201	ABOUT-NLS COPYING NEWS compile config.guess config.rpath \
202	config.sub depcomp install-sh ltmain.sh missing
203DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
204distdir = $(PACKAGE)-$(VERSION)
205top_distdir = $(distdir)
206am__remove_distdir = \
207  if test -d "$(distdir)"; then \
208    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
209      && rm -rf "$(distdir)" \
210      || { sleep 5 && rm -rf "$(distdir)"; }; \
211  else :; fi
212am__post_remove_distdir = $(am__remove_distdir)
213am__relativize = \
214  dir0=`pwd`; \
215  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
216  sed_rest='s,^[^/]*/*,,'; \
217  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
218  sed_butlast='s,/*[^/]*$$,,'; \
219  while test -n "$$dir1"; do \
220    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
221    if test "$$first" != "."; then \
222      if test "$$first" = ".."; then \
223        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
224        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
225      else \
226        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
227        if test "$$first2" = "$$first"; then \
228          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
229        else \
230          dir2="../$$dir2"; \
231        fi; \
232        dir0="$$dir0"/"$$first"; \
233      fi; \
234    fi; \
235    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
236  done; \
237  reldir="$$dir2"
238DIST_ARCHIVES = $(distdir).tar.gz
239GZIP_ENV = --best
240DIST_TARGETS = dist-gzip
241distuninstallcheck_listfiles = find . -type f -print
242am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
243  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
244distcleancheck_listfiles = find . -type f -print
245ACLOCAL = @ACLOCAL@
246AMTAR = @AMTAR@
247AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
248AR = @AR@
249AUTOCONF = @AUTOCONF@
250AUTOHEADER = @AUTOHEADER@
251AUTOMAKE = @AUTOMAKE@
252AWK = @AWK@
253CC = @CC@
254CCDEPMODE = @CCDEPMODE@
255CFLAGS = @CFLAGS@
256CPP = @CPP@
257CPPFLAGS = @CPPFLAGS@
258CYGPATH_W = @CYGPATH_W@
259DEFS = @DEFS@
260DEPDIR = @DEPDIR@
261DLLTOOL = @DLLTOOL@
262DSYMUTIL = @DSYMUTIL@
263DUMPBIN = @DUMPBIN@
264ECHO_C = @ECHO_C@
265ECHO_N = @ECHO_N@
266ECHO_T = @ECHO_T@
267EGREP = @EGREP@
268EXEEXT = @EXEEXT@
269FGREP = @FGREP@
270GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
271GMSGFMT = @GMSGFMT@
272GMSGFMT_015 = @GMSGFMT_015@
273GREP = @GREP@
274INSTALL = @INSTALL@
275INSTALL_DATA = @INSTALL_DATA@
276INSTALL_PROGRAM = @INSTALL_PROGRAM@
277INSTALL_SCRIPT = @INSTALL_SCRIPT@
278INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
279INTLLIBS = @INTLLIBS@
280INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
281LD = @LD@
282LDFLAGS = @LDFLAGS@
283LIBICONV = @LIBICONV@
284LIBINTL = @LIBINTL@
285LIBOBJS = @LIBOBJS@
286LIBP11_CFLAGS = @LIBP11_CFLAGS@
287LIBP11_LIBS = @LIBP11_LIBS@
288LIBS = @LIBS@
289LIBTOOL = @LIBTOOL@
290LIPO = @LIPO@
291LN_S = @LN_S@
292LTLIBICONV = @LTLIBICONV@
293LTLIBINTL = @LTLIBINTL@
294LTLIBOBJS = @LTLIBOBJS@
295LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
296MAKEINFO = @MAKEINFO@
297MANIFEST_TOOL = @MANIFEST_TOOL@
298MKDIR_P = @MKDIR_P@
299MSGFMT = @MSGFMT@
300MSGFMT_015 = @MSGFMT_015@
301MSGMERGE = @MSGMERGE@
302NM = @NM@
303NMEDIT = @NMEDIT@
304OBJDUMP = @OBJDUMP@
305OBJEXT = @OBJEXT@
306OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
307OPENSSL_LIBS = @OPENSSL_LIBS@
308OTOOL = @OTOOL@
309OTOOL64 = @OTOOL64@
310PACKAGE = @PACKAGE@
311PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
312PACKAGE_NAME = @PACKAGE_NAME@
313PACKAGE_STRING = @PACKAGE_STRING@
314PACKAGE_TARNAME = @PACKAGE_TARNAME@
315PACKAGE_URL = @PACKAGE_URL@
316PACKAGE_VERSION = @PACKAGE_VERSION@
317PAM_CFLAGS = @PAM_CFLAGS@
318PAM_LIBS = @PAM_LIBS@
319PATH_SEPARATOR = @PATH_SEPARATOR@
320PKG_CONFIG = @PKG_CONFIG@
321PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
322PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
323POSUB = @POSUB@
324RANLIB = @RANLIB@
325SED = @SED@
326SET_MAKE = @SET_MAKE@
327SHELL = @SHELL@
328STRIP = @STRIP@
329USE_NLS = @USE_NLS@
330VERSION = @VERSION@
331XGETTEXT = @XGETTEXT@
332XGETTEXT_015 = @XGETTEXT_015@
333XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
334abs_builddir = @abs_builddir@
335abs_srcdir = @abs_srcdir@
336abs_top_builddir = @abs_top_builddir@
337abs_top_srcdir = @abs_top_srcdir@
338ac_ct_AR = @ac_ct_AR@
339ac_ct_CC = @ac_ct_CC@
340ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
341am__include = @am__include@
342am__leading_dot = @am__leading_dot@
343am__quote = @am__quote@
344am__tar = @am__tar@
345am__untar = @am__untar@
346bindir = @bindir@
347build = @build@
348build_alias = @build_alias@
349build_cpu = @build_cpu@
350build_os = @build_os@
351build_vendor = @build_vendor@
352builddir = @builddir@
353datadir = @datadir@
354datarootdir = @datarootdir@
355docdir = @docdir@
356dvidir = @dvidir@
357exec_prefix = @exec_prefix@
358host = @host@
359host_alias = @host_alias@
360host_cpu = @host_cpu@
361host_os = @host_os@
362host_vendor = @host_vendor@
363htmldir = @htmldir@
364includedir = @includedir@
365infodir = @infodir@
366install_sh = @install_sh@
367libdir = @libdir@
368libexecdir = @libexecdir@
369localedir = @localedir@
370localstatedir = @localstatedir@
371mandir = @mandir@
372mkdir_p = @mkdir_p@
373oldincludedir = @oldincludedir@
374pamdir = @pamdir@
375pdfdir = @pdfdir@
376prefix = @prefix@
377program_transform_name = @program_transform_name@
378psdir = @psdir@
379runstatedir = @runstatedir@
380sbindir = @sbindir@
381sharedstatedir = @sharedstatedir@
382srcdir = @srcdir@
383sysconfdir = @sysconfdir@
384target_alias = @target_alias@
385top_build_prefix = @top_build_prefix@
386top_builddir = @top_builddir@
387top_srcdir = @top_srcdir@
388AUTOMAKE_OPTIONS = foreign 1.10
389ACLOCAL_AMFLAGS = -I m4
390MAINTAINERCLEANFILES = \
391	config.log config.status \
392	$(srcdir)/Makefile.in \
393	$(srcdir)/config.h.in $(srcdir)/config.h.in~ $(srcdir)/configure \
394	$(srcdir)/install-sh $(srcdir)/ltmain.sh $(srcdir)/missing \
395	$(srcdir)/depcomp $(srcdir)/aclocal.m4 \
396	$(srcdir)/config.guess $(srcdir)/config.sub \
397	$(srcdir)/m4/ltsugar.m4 $(srcdir)/m4/libtool.m4 \
398	$(srcdir)/m4/ltversion.m4 $(srcdir)/m4/lt~obsolete.m4 \
399	$(srcdir)/m4/ltoptions.m4 \
400	$(srcdir)/packaged
401
402EXTRA_DIST = ./config.rpath .gitignore
403SUBDIRS = po src
404dist_noinst_SCRIPTS = bootstrap
405dist_doc_DATA = NEWS README.md
406all: config.h
407	$(MAKE) $(AM_MAKEFLAGS) all-recursive
408
409.SUFFIXES:
410am--refresh: Makefile
411	@:
412$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
413	@for dep in $?; do \
414	  case '$(am__configure_deps)' in \
415	    *$$dep*) \
416	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
417	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
418		&& exit 0; \
419	      exit 1;; \
420	  esac; \
421	done; \
422	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
423	$(am__cd) $(top_srcdir) && \
424	  $(AUTOMAKE) --foreign Makefile
425Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
426	@case '$?' in \
427	  *config.status*) \
428	    echo ' $(SHELL) ./config.status'; \
429	    $(SHELL) ./config.status;; \
430	  *) \
431	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
432	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
433	esac;
434
435$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
436	$(SHELL) ./config.status --recheck
437
438$(top_srcdir)/configure:  $(am__configure_deps)
439	$(am__cd) $(srcdir) && $(AUTOCONF)
440$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
441	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
442$(am__aclocal_m4_deps):
443
444config.h: stamp-h1
445	@test -f $@ || rm -f stamp-h1
446	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
447
448stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
449	@rm -f stamp-h1
450	cd $(top_builddir) && $(SHELL) ./config.status config.h
451$(srcdir)/config.h.in:  $(am__configure_deps)
452	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
453	rm -f stamp-h1
454	touch $@
455
456distclean-hdr:
457	-rm -f config.h stamp-h1
458
459mostlyclean-libtool:
460	-rm -f *.lo
461
462clean-libtool:
463	-rm -rf .libs _libs
464
465distclean-libtool:
466	-rm -f libtool config.lt
467install-dist_docDATA: $(dist_doc_DATA)
468	@$(NORMAL_INSTALL)
469	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
470	if test -n "$$list"; then \
471	  echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
472	  $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
473	fi; \
474	for p in $$list; do \
475	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
476	  echo "$$d$$p"; \
477	done | $(am__base_list) | \
478	while read files; do \
479	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
480	  $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
481	done
482
483uninstall-dist_docDATA:
484	@$(NORMAL_UNINSTALL)
485	@list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
486	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
487	dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
488
489# This directory's subdirectories are mostly independent; you can cd
490# into them and run 'make' without going through this Makefile.
491# To change the values of 'make' variables: instead of editing Makefiles,
492# (1) if the variable is set in 'config.status', edit 'config.status'
493#     (which will cause the Makefiles to be regenerated when you run 'make');
494# (2) otherwise, pass the desired values on the 'make' command line.
495$(am__recursive_targets):
496	@fail=; \
497	if $(am__make_keepgoing); then \
498	  failcom='fail=yes'; \
499	else \
500	  failcom='exit 1'; \
501	fi; \
502	dot_seen=no; \
503	target=`echo $@ | sed s/-recursive//`; \
504	case "$@" in \
505	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
506	  *) list='$(SUBDIRS)' ;; \
507	esac; \
508	for subdir in $$list; do \
509	  echo "Making $$target in $$subdir"; \
510	  if test "$$subdir" = "."; then \
511	    dot_seen=yes; \
512	    local_target="$$target-am"; \
513	  else \
514	    local_target="$$target"; \
515	  fi; \
516	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
517	  || eval $$failcom; \
518	done; \
519	if test "$$dot_seen" = "no"; then \
520	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
521	fi; test -z "$$fail"
522
523ID: $(am__tagged_files)
524	$(am__define_uniq_tagged_files); mkid -fID $$unique
525tags: tags-recursive
526TAGS: tags
527
528tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
529	set x; \
530	here=`pwd`; \
531	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
532	  include_option=--etags-include; \
533	  empty_fix=.; \
534	else \
535	  include_option=--include; \
536	  empty_fix=; \
537	fi; \
538	list='$(SUBDIRS)'; for subdir in $$list; do \
539	  if test "$$subdir" = .; then :; else \
540	    test ! -f $$subdir/TAGS || \
541	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
542	  fi; \
543	done; \
544	$(am__define_uniq_tagged_files); \
545	shift; \
546	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
547	  test -n "$$unique" || unique=$$empty_fix; \
548	  if test $$# -gt 0; then \
549	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
550	      "$$@" $$unique; \
551	  else \
552	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
553	      $$unique; \
554	  fi; \
555	fi
556ctags: ctags-recursive
557
558CTAGS: ctags
559ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
560	$(am__define_uniq_tagged_files); \
561	test -z "$(CTAGS_ARGS)$$unique" \
562	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
563	     $$unique
564
565GTAGS:
566	here=`$(am__cd) $(top_builddir) && pwd` \
567	  && $(am__cd) $(top_srcdir) \
568	  && gtags -i $(GTAGS_ARGS) "$$here"
569cscope: cscope.files
570	test ! -s cscope.files \
571	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
572clean-cscope:
573	-rm -f cscope.files
574cscope.files: clean-cscope cscopelist
575cscopelist: cscopelist-recursive
576
577cscopelist-am: $(am__tagged_files)
578	list='$(am__tagged_files)'; \
579	case "$(srcdir)" in \
580	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
581	  *) sdir=$(subdir)/$(srcdir) ;; \
582	esac; \
583	for i in $$list; do \
584	  if test -f "$$i"; then \
585	    echo "$(subdir)/$$i"; \
586	  else \
587	    echo "$$sdir/$$i"; \
588	  fi; \
589	done >> $(top_builddir)/cscope.files
590
591distclean-tags:
592	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
593	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
594
595distdir: $(DISTFILES)
596	$(am__remove_distdir)
597	test -d "$(distdir)" || mkdir "$(distdir)"
598	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
599	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
600	list='$(DISTFILES)'; \
601	  dist_files=`for file in $$list; do echo $$file; done | \
602	  sed -e "s|^$$srcdirstrip/||;t" \
603	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
604	case $$dist_files in \
605	  */*) $(MKDIR_P) `echo "$$dist_files" | \
606			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
607			   sort -u` ;; \
608	esac; \
609	for file in $$dist_files; do \
610	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
611	  if test -d $$d/$$file; then \
612	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
613	    if test -d "$(distdir)/$$file"; then \
614	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
615	    fi; \
616	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
617	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
618	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
619	    fi; \
620	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
621	  else \
622	    test -f "$(distdir)/$$file" \
623	    || cp -p $$d/$$file "$(distdir)/$$file" \
624	    || exit 1; \
625	  fi; \
626	done
627	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
628	  if test "$$subdir" = .; then :; else \
629	    $(am__make_dryrun) \
630	      || test -d "$(distdir)/$$subdir" \
631	      || $(MKDIR_P) "$(distdir)/$$subdir" \
632	      || exit 1; \
633	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
634	    $(am__relativize); \
635	    new_distdir=$$reldir; \
636	    dir1=$$subdir; dir2="$(top_distdir)"; \
637	    $(am__relativize); \
638	    new_top_distdir=$$reldir; \
639	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
640	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
641	    ($(am__cd) $$subdir && \
642	      $(MAKE) $(AM_MAKEFLAGS) \
643	        top_distdir="$$new_top_distdir" \
644	        distdir="$$new_distdir" \
645		am__remove_distdir=: \
646		am__skip_length_check=: \
647		am__skip_mode_fix=: \
648	        distdir) \
649	      || exit 1; \
650	  fi; \
651	done
652	$(MAKE) $(AM_MAKEFLAGS) \
653	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
654	  dist-hook
655	-test -n "$(am__skip_mode_fix)" \
656	|| find "$(distdir)" -type d ! -perm -755 \
657		-exec chmod u+rwx,go+rx {} \; -o \
658	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
659	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
660	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
661	|| chmod -R a+r "$(distdir)"
662dist-gzip: distdir
663	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
664	$(am__post_remove_distdir)
665
666dist-bzip2: distdir
667	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
668	$(am__post_remove_distdir)
669
670dist-lzip: distdir
671	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
672	$(am__post_remove_distdir)
673
674dist-xz: distdir
675	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
676	$(am__post_remove_distdir)
677
678dist-tarZ: distdir
679	@echo WARNING: "Support for distribution archives compressed with" \
680		       "legacy program 'compress' is deprecated." >&2
681	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
682	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
683	$(am__post_remove_distdir)
684
685dist-shar: distdir
686	@echo WARNING: "Support for shar distribution archives is" \
687	               "deprecated." >&2
688	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
689	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
690	$(am__post_remove_distdir)
691
692dist-zip: distdir
693	-rm -f $(distdir).zip
694	zip -rq $(distdir).zip $(distdir)
695	$(am__post_remove_distdir)
696
697dist dist-all:
698	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
699	$(am__post_remove_distdir)
700
701# This target untars the dist file and tries a VPATH configuration.  Then
702# it guarantees that the distribution is self-contained by making another
703# tarfile.
704distcheck: dist
705	case '$(DIST_ARCHIVES)' in \
706	*.tar.gz*) \
707	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
708	*.tar.bz2*) \
709	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
710	*.tar.lz*) \
711	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
712	*.tar.xz*) \
713	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
714	*.tar.Z*) \
715	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
716	*.shar.gz*) \
717	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
718	*.zip*) \
719	  unzip $(distdir).zip ;;\
720	esac
721	chmod -R a-w $(distdir)
722	chmod u+w $(distdir)
723	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
724	chmod a-w $(distdir)
725	test -d $(distdir)/_build || exit 0; \
726	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
727	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
728	  && am__cwd=`pwd` \
729	  && $(am__cd) $(distdir)/_build/sub \
730	  && ../../configure \
731	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
732	    $(DISTCHECK_CONFIGURE_FLAGS) \
733	    --srcdir=../.. --prefix="$$dc_install_base" \
734	  && $(MAKE) $(AM_MAKEFLAGS) \
735	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
736	  && $(MAKE) $(AM_MAKEFLAGS) check \
737	  && $(MAKE) $(AM_MAKEFLAGS) install \
738	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
739	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
740	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
741	        distuninstallcheck \
742	  && chmod -R a-w "$$dc_install_base" \
743	  && ({ \
744	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
745	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
746	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
747	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
748	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
749	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
750	  && rm -rf "$$dc_destdir" \
751	  && $(MAKE) $(AM_MAKEFLAGS) dist \
752	  && rm -rf $(DIST_ARCHIVES) \
753	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
754	  && cd "$$am__cwd" \
755	  || exit 1
756	$(am__post_remove_distdir)
757	@(echo "$(distdir) archives ready for distribution: "; \
758	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
759	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
760distuninstallcheck:
761	@test -n '$(distuninstallcheck_dir)' || { \
762	  echo 'ERROR: trying to run $@ with an empty' \
763	       '$$(distuninstallcheck_dir)' >&2; \
764	  exit 1; \
765	}; \
766	$(am__cd) '$(distuninstallcheck_dir)' || { \
767	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
768	  exit 1; \
769	}; \
770	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
771	   || { echo "ERROR: files left after uninstall:" ; \
772	        if test -n "$(DESTDIR)"; then \
773	          echo "  (check DESTDIR support)"; \
774	        fi ; \
775	        $(distuninstallcheck_listfiles) ; \
776	        exit 1; } >&2
777distcleancheck: distclean
778	@if test '$(srcdir)' = . ; then \
779	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
780	  exit 1 ; \
781	fi
782	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
783	  || { echo "ERROR: files left in build directory after distclean:" ; \
784	       $(distcleancheck_listfiles) ; \
785	       exit 1; } >&2
786check-am: all-am
787check: check-recursive
788all-am: Makefile $(SCRIPTS) $(DATA) config.h
789installdirs: installdirs-recursive
790installdirs-am:
791	for dir in "$(DESTDIR)$(docdir)"; do \
792	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
793	done
794install: install-recursive
795install-exec: install-exec-recursive
796install-data: install-data-recursive
797uninstall: uninstall-recursive
798
799install-am: all-am
800	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
801
802installcheck: installcheck-recursive
803install-strip:
804	if test -z '$(STRIP)'; then \
805	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
806	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
807	      install; \
808	else \
809	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
810	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
811	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
812	fi
813mostlyclean-generic:
814
815clean-generic:
816
817distclean-generic:
818	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
819	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
820
821maintainer-clean-generic:
822	@echo "This command is intended for maintainers to use"
823	@echo "it deletes files that may require special tools to rebuild."
824	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
825clean: clean-recursive
826
827clean-am: clean-generic clean-libtool mostlyclean-am
828
829distclean: distclean-recursive
830	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
831	-rm -f Makefile
832distclean-am: clean-am distclean-generic distclean-hdr \
833	distclean-libtool distclean-tags
834
835dvi: dvi-recursive
836
837dvi-am:
838
839html: html-recursive
840
841html-am:
842
843info: info-recursive
844
845info-am:
846
847install-data-am: install-dist_docDATA
848
849install-dvi: install-dvi-recursive
850
851install-dvi-am:
852
853install-exec-am:
854
855install-html: install-html-recursive
856
857install-html-am:
858
859install-info: install-info-recursive
860
861install-info-am:
862
863install-man:
864
865install-pdf: install-pdf-recursive
866
867install-pdf-am:
868
869install-ps: install-ps-recursive
870
871install-ps-am:
872
873installcheck-am:
874
875maintainer-clean: maintainer-clean-recursive
876	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
877	-rm -rf $(top_srcdir)/autom4te.cache
878	-rm -f Makefile
879maintainer-clean-am: distclean-am maintainer-clean-generic
880
881mostlyclean: mostlyclean-recursive
882
883mostlyclean-am: mostlyclean-generic mostlyclean-libtool
884
885pdf: pdf-recursive
886
887pdf-am:
888
889ps: ps-recursive
890
891ps-am:
892
893uninstall-am: uninstall-dist_docDATA
894
895.MAKE: $(am__recursive_targets) all install-am install-strip
896
897.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
898	am--refresh check check-am clean clean-cscope clean-generic \
899	clean-libtool cscope cscopelist-am ctags ctags-am dist \
900	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
901	dist-tarZ dist-xz dist-zip distcheck distclean \
902	distclean-generic distclean-hdr distclean-libtool \
903	distclean-tags distcleancheck distdir distuninstallcheck dvi \
904	dvi-am html html-am info info-am install install-am \
905	install-data install-data-am install-dist_docDATA install-dvi \
906	install-dvi-am install-exec install-exec-am install-html \
907	install-html-am install-info install-info-am install-man \
908	install-pdf install-pdf-am install-ps install-ps-am \
909	install-strip installcheck installcheck-am installdirs \
910	installdirs-am maintainer-clean maintainer-clean-generic \
911	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
912	ps ps-am tags tags-am uninstall uninstall-am \
913	uninstall-dist_docDATA
914
915.PRECIOUS: Makefile
916
917
918# Allow detection of packaged tarball
919dist-hook:
920	$(MKDIR_P) "$(distdir)/m4"
921	echo > "$(distdir)/packaged"
922
923# Tell versions [3.59,3.63) of GNU make to not export all variables.
924# Otherwise a system limit (for SysV at least) may be exceeded.
925.NOEXPORT:
926