1/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * Hans de Goede <hdegoede@redhat.com>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 *  a) This file is free software; you can redistribute it and/or
12 *     modify it under the terms of the GNU General Public License as
13 *     published by the Free Software Foundation; either version 2 of the
14 *     License, or (at your option) any later version.
15 *
16 *     This file is distributed in the hope that it will be useful,
17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19 *     GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 *  b) Permission is hereby granted, free of charge, to any person
24 *     obtaining a copy of this software and associated documentation
25 *     files (the "Software"), to deal in the Software without
26 *     restriction, including without limitation the rights to use,
27 *     copy, modify, merge, publish, distribute, sublicense, and/or
28 *     sell copies of the Software, and to permit persons to whom the
29 *     Software is furnished to do so, subject to the following
30 *     conditions:
31 *
32 *     The above copyright notice and this permission notice shall be
33 *     included in all copies or substantial portions of the Software.
34 *
35 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 *     OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45/dts-v1/;
46#include "sun7i-a20.dtsi"
47#include "sunxi-common-regulators.dtsi"
48
49#include <dt-bindings/gpio/gpio.h>
50#include <dt-bindings/interrupt-controller/irq.h>
51
52/ {
53	model = "Mele M3";
54	compatible = "mele,m3", "allwinner,sun7i-a20";
55
56	aliases {
57		serial0 = &uart0;
58	};
59
60	chosen {
61		stdout-path = "serial0:115200n8";
62	};
63
64	leds {
65		compatible = "gpio-leds";
66
67		blue {
68			label = "m3:blue:usr";
69			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
70		};
71	};
72};
73
74&ehci0 {
75	status = "okay";
76};
77
78&ehci1 {
79	status = "okay";
80};
81
82&gmac {
83	pinctrl-names = "default";
84	pinctrl-0 = <&gmac_mii_pins>;
85	phy = <&phy1>;
86	phy-mode = "mii";
87	status = "okay";
88
89	phy1: ethernet-phy@1 {
90		reg = <1>;
91	};
92};
93
94&i2c0 {
95	status = "okay";
96
97	axp209: pmic@34 {
98		compatible = "x-powers,axp209";
99		reg = <0x34>;
100		interrupt-parent = <&nmi_intc>;
101		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
102
103		interrupt-controller;
104		#interrupt-cells = <1>;
105	};
106};
107
108&ir0 {
109	pinctrl-names = "default";
110	pinctrl-0 = <&ir0_rx_pin>;
111	status = "okay";
112};
113
114&mmc0 {
115	vmmc-supply = <&reg_vcc3v3>;
116	bus-width = <4>;
117	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
118	status = "okay";
119};
120
121&mmc2 {
122	vmmc-supply = <&reg_vcc3v3>;
123	bus-width = <4>;
124	non-removable;
125	status = "okay";
126};
127
128&ohci0 {
129	status = "okay";
130};
131
132&ohci1 {
133	status = "okay";
134};
135
136&reg_usb1_vbus {
137	status = "okay";
138};
139
140&reg_usb2_vbus {
141	status = "okay";
142};
143
144&uart0 {
145	pinctrl-names = "default";
146	pinctrl-0 = <&uart0_pb_pins>;
147	status = "okay";
148};
149
150&usbphy {
151	usb1_vbus-supply = <&reg_usb1_vbus>;
152	usb2_vbus-supply = <&reg_usb2_vbus>;
153	status = "okay";
154};
155