1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * (C) Copyright 2010-2014
4  * NVIDIA Corporation <www.nvidia.com>
5  */
6 
7 #ifndef _TEGRA_PINMUX_H_
8 #define _TEGRA_PINMUX_H_
9 
10 #include <linux/types.h>
11 
12 #include <asm/arch/tegra.h>
13 
14 /* The pullup/pulldown state of a pin group */
15 enum pmux_pull {
16 	PMUX_PULL_NORMAL = 0,
17 	PMUX_PULL_DOWN,
18 	PMUX_PULL_UP,
19 };
20 
21 /* Defines whether a pin group is tristated or in normal operation */
22 enum pmux_tristate {
23 	PMUX_TRI_NORMAL = 0,
24 	PMUX_TRI_TRISTATE = 1,
25 };
26 
27 #ifdef TEGRA_PMX_PINS_HAVE_E_INPUT
28 enum pmux_pin_io {
29 	PMUX_PIN_OUTPUT = 0,
30 	PMUX_PIN_INPUT = 1,
31 	PMUX_PIN_NONE,
32 };
33 #endif
34 
35 #ifdef TEGRA_PMX_PINS_HAVE_LOCK
36 enum pmux_pin_lock {
37 	PMUX_PIN_LOCK_DEFAULT = 0,
38 	PMUX_PIN_LOCK_DISABLE,
39 	PMUX_PIN_LOCK_ENABLE,
40 };
41 #endif
42 
43 #ifdef TEGRA_PMX_PINS_HAVE_OD
44 enum pmux_pin_od {
45 	PMUX_PIN_OD_DEFAULT = 0,
46 	PMUX_PIN_OD_DISABLE,
47 	PMUX_PIN_OD_ENABLE,
48 };
49 #endif
50 
51 #ifdef TEGRA_PMX_PINS_HAVE_IO_RESET
52 enum pmux_pin_ioreset {
53 	PMUX_PIN_IO_RESET_DEFAULT = 0,
54 	PMUX_PIN_IO_RESET_DISABLE,
55 	PMUX_PIN_IO_RESET_ENABLE,
56 };
57 #endif
58 
59 #ifdef TEGRA_PMX_PINS_HAVE_RCV_SEL
60 enum pmux_pin_rcv_sel {
61 	PMUX_PIN_RCV_SEL_DEFAULT = 0,
62 	PMUX_PIN_RCV_SEL_NORMAL,
63 	PMUX_PIN_RCV_SEL_HIGH,
64 };
65 #endif
66 
67 #ifdef TEGRA_PMX_PINS_HAVE_E_IO_HV
68 enum pmux_pin_e_io_hv {
69 	PMUX_PIN_E_IO_HV_DEFAULT = 0,
70 	PMUX_PIN_E_IO_HV_NORMAL,
71 	PMUX_PIN_E_IO_HV_HIGH,
72 };
73 #endif
74 
75 #ifdef TEGRA_PMX_GRPS_HAVE_LPMD
76 /* Defines a pin group cfg's low-power mode select */
77 enum pmux_lpmd {
78 	PMUX_LPMD_X8 = 0,
79 	PMUX_LPMD_X4,
80 	PMUX_LPMD_X2,
81 	PMUX_LPMD_X,
82 	PMUX_LPMD_NONE = -1,
83 };
84 #endif
85 
86 #if defined(TEGRA_PMX_PINS_HAVE_SCHMT) || defined(TEGRA_PMX_GRPS_HAVE_SCHMT)
87 /* Defines whether a pin group cfg's schmidt is enabled or not */
88 enum pmux_schmt {
89 	PMUX_SCHMT_DISABLE = 0,
90 	PMUX_SCHMT_ENABLE = 1,
91 	PMUX_SCHMT_NONE = -1,
92 };
93 #endif
94 
95 #if defined(TEGRA_PMX_PINS_HAVE_HSM) || defined(TEGRA_PMX_GRPS_HAVE_HSM)
96 /* Defines whether a pin group cfg's high-speed mode is enabled or not */
97 enum pmux_hsm {
98 	PMUX_HSM_DISABLE = 0,
99 	PMUX_HSM_ENABLE = 1,
100 	PMUX_HSM_NONE = -1,
101 };
102 #endif
103 
104 /*
105  * This defines the configuration for a pin, including the function assigned,
106  * pull up/down settings and tristate settings. Having set up one of these
107  * you can call pinmux_config_pingroup() to configure a pin in one step. Also
108  * available is pinmux_config_table() to configure a list of pins.
109  */
110 struct pmux_pingrp_config {
111 	u32 pingrp:16;		/* pin group PMUX_PINGRP_...        */
112 	u32 func:8;		/* function to assign PMUX_FUNC_... */
113 	u32 pull:2;		/* pull up/down/normal PMUX_PULL_...*/
114 	u32 tristate:2;		/* tristate or normal PMUX_TRI_...  */
115 #ifdef TEGRA_PMX_PINS_HAVE_E_INPUT
116 	u32 io:2;		/* input or output PMUX_PIN_...     */
117 #endif
118 #ifdef TEGRA_PMX_PINS_HAVE_LOCK
119 	u32 lock:2;		/* lock enable/disable PMUX_PIN...  */
120 #endif
121 #ifdef TEGRA_PMX_PINS_HAVE_OD
122 	u32 od:2;		/* open-drain or push-pull driver   */
123 #endif
124 #ifdef TEGRA_PMX_PINS_HAVE_IO_RESET
125 	u32 ioreset:2;		/* input/output reset PMUX_PIN...   */
126 #endif
127 #ifdef TEGRA_PMX_PINS_HAVE_RCV_SEL
128 	u32 rcv_sel:2;		/* select between High and Normal  */
129 				/* VIL/VIH receivers */
130 #endif
131 #ifdef TEGRA_PMX_PINS_HAVE_E_IO_HV
132 	u32 e_io_hv:2;		/* select 3.3v tolerant receivers */
133 #endif
134 #ifdef TEGRA_PMX_PINS_HAVE_SCHMT
135 	u32 schmt:2;		/* schmitt enable            */
136 #endif
137 #ifdef TEGRA_PMX_PINS_HAVE_HSM
138 	u32 hsm:2;		/* high-speed mode enable    */
139 #endif
140 };
141 
142 #ifdef TEGRA_PMX_SOC_HAS_IO_CLAMPING
143 /* Set/clear the pinmux CLAMP_INPUTS_WHEN_TRISTATED bit */
144 void pinmux_set_tristate_input_clamping(void);
145 void pinmux_clear_tristate_input_clamping(void);
146 #endif
147 
148 /* Set the mux function for a pin group */
149 void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
150 
151 /* Set the pull up/down feature for a pin group */
152 void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
153 
154 /* Set a pin group to tristate */
155 void pinmux_tristate_enable(enum pmux_pingrp pin);
156 
157 /* Set a pin group to normal (non tristate) */
158 void pinmux_tristate_disable(enum pmux_pingrp pin);
159 
160 #ifdef TEGRA_PMX_PINS_HAVE_E_INPUT
161 /* Set a pin group as input or output */
162 void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io);
163 #endif
164 
165 /**
166  * Configure a list of pin groups
167  *
168  * @param config	List of config items
169  * @param len		Number of config items in list
170  */
171 void pinmux_config_pingrp_table(const struct pmux_pingrp_config *config,
172 				int len);
173 
174 struct pmux_pingrp_desc {
175 	u8 funcs[4];
176 #if defined(CONFIG_TEGRA20)
177 	u8 ctl_id;
178 	u8 pull_id;
179 #endif /* CONFIG_TEGRA20 */
180 };
181 
182 extern const struct pmux_pingrp_desc *tegra_soc_pingroups;
183 
184 #ifdef TEGRA_PMX_SOC_HAS_DRVGRPS
185 
186 #define PMUX_SLWF_MIN	0
187 #define PMUX_SLWF_MAX	3
188 #define PMUX_SLWF_NONE	-1
189 
190 #define PMUX_SLWR_MIN	0
191 #define PMUX_SLWR_MAX	3
192 #define PMUX_SLWR_NONE	-1
193 
194 #define PMUX_DRVUP_MIN	0
195 #define PMUX_DRVUP_MAX	127
196 #define PMUX_DRVUP_NONE	-1
197 
198 #define PMUX_DRVDN_MIN	0
199 #define PMUX_DRVDN_MAX	127
200 #define PMUX_DRVDN_NONE	-1
201 
202 /*
203  * This defines the configuration for a pin group's pad control config
204  */
205 struct pmux_drvgrp_config {
206 	u32 drvgrp:16;	/* pin group PMUX_DRVGRP_x   */
207 	u32 slwf:3;		/* falling edge slew         */
208 	u32 slwr:3;		/* rising edge slew          */
209 	u32 drvup:8;		/* pull-up drive strength    */
210 	u32 drvdn:8;		/* pull-down drive strength  */
211 #ifdef TEGRA_PMX_GRPS_HAVE_LPMD
212 	u32 lpmd:3;		/* low-power mode selection  */
213 #endif
214 #ifdef TEGRA_PMX_GRPS_HAVE_SCHMT
215 	u32 schmt:2;		/* schmidt enable            */
216 #endif
217 #ifdef TEGRA_PMX_GRPS_HAVE_HSM
218 	u32 hsm:2;		/* high-speed mode enable    */
219 #endif
220 };
221 
222 /**
223  * Set the GP pad configs
224  *
225  * @param config	List of config items
226  * @param len		Number of config items in list
227  */
228 void pinmux_config_drvgrp_table(const struct pmux_drvgrp_config *config,
229 				int len);
230 
231 #endif /* TEGRA_PMX_SOC_HAS_DRVGRPS */
232 
233 #ifdef TEGRA_PMX_SOC_HAS_MIPI_PAD_CTRL_GRPS
234 struct pmux_mipipadctrlgrp_config {
235 	u32 grp:16;	/* pin group PMUX_MIPIPADCTRLGRP_x   */
236 	u32 func:8;	/* function to assign PMUX_FUNC_... */
237 };
238 
239 void pinmux_config_mipipadctrlgrp_table(
240 	const struct pmux_mipipadctrlgrp_config *config, int len);
241 
242 struct pmux_mipipadctrlgrp_desc {
243 	u8 funcs[2];
244 };
245 
246 extern const struct pmux_mipipadctrlgrp_desc *tegra_soc_mipipadctrl_groups;
247 #endif /* TEGRA_PMX_SOC_HAS_MIPI_PAD_CTRL_GRPS */
248 
249 #endif /* _TEGRA_PINMUX_H_ */
250