1/* 2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun4i-a10.dtsi" 45#include "sunxi-common-regulators.dtsi" 46#include <dt-bindings/gpio/gpio.h> 47 48/ { 49 model = "Hyundai A7HD"; 50 compatible = "hyundai,a7hd", "allwinner,sun4i-a10"; 51 52 aliases { 53 serial0 = &uart0; 54 }; 55 56 chosen { 57 stdout-path = "serial0:115200n8"; 58 }; 59}; 60 61&ehci1 { 62 status = "okay"; 63}; 64 65&i2c0 { 66 status = "okay"; 67 68 axp209: pmic@34 { 69 compatible = "x-powers,axp209"; 70 reg = <0x34>; 71 interrupts = <0>; 72 73 interrupt-controller; 74 #interrupt-cells = <1>; 75 }; 76}; 77 78&mmc0 { 79 vmmc-supply = <®_vcc3v3>; 80 bus-width = <4>; 81 cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ 82 status = "okay"; 83}; 84 85&otg_sram { 86 status = "okay"; 87}; 88 89&pio { 90 usb0_id_detect_pin: usb0-id-detect-pin { 91 pins = "PH4"; 92 function = "gpio_in"; 93 bias-pull-up; 94 }; 95 96 usb0_vbus_detect_pin: usb0-vbus-detect-pin { 97 pins = "PH5"; 98 function = "gpio_in"; 99 bias-pull-down; 100 }; 101}; 102 103®_usb0_vbus { 104 status = "okay"; 105}; 106 107®_usb2_vbus { 108 gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ 109 status = "okay"; 110}; 111 112&uart0 { 113 pinctrl-names = "default"; 114 pinctrl-0 = <&uart0_pb_pins>; 115 status = "okay"; 116}; 117 118&usb_otg { 119 dr_mode = "otg"; 120 status = "okay"; 121}; 122 123&usbphy { 124 pinctrl-names = "default"; 125 pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; 126 usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ 127 usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ 128 usb0_vbus-supply = <®_usb0_vbus>; 129 usb2_vbus-supply = <®_usb2_vbus>; 130 status = "okay"; 131}; 132