1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * PCIe driver for Marvell MVEBU SoCs
4  *
5  * Based on Barebox drivers/pci/pci-mvebu.c
6  *
7  * Ported to U-Boot by:
8  * Anton Schubert <anton.schubert@gmx.de>
9  * Stefan Roese <sr@denx.de>
10  */
11 
12 #include <common.h>
13 #include <dm.h>
14 #include <log.h>
15 #include <malloc.h>
16 #include <asm/global_data.h>
17 #include <dm/device-internal.h>
18 #include <dm/lists.h>
19 #include <dm/of_access.h>
20 #include <pci.h>
21 #include <asm/io.h>
22 #include <asm/arch/cpu.h>
23 #include <asm/arch/soc.h>
24 #include <linux/bitops.h>
25 #include <linux/errno.h>
26 #include <linux/ioport.h>
27 #include <linux/mbus.h>
28 
29 DECLARE_GLOBAL_DATA_PTR;
30 
31 /* PCIe unit register offsets */
32 #define SELECT(x, n)			((x >> n) & 1UL)
33 
34 #define PCIE_DEV_ID_OFF			0x0000
35 #define PCIE_CMD_OFF			0x0004
36 #define PCIE_DEV_REV_OFF		0x0008
37 #define  PCIE_BAR_LO_OFF(n)		(0x0010 + ((n) << 3))
38 #define  PCIE_BAR_HI_OFF(n)		(0x0014 + ((n) << 3))
39 #define PCIE_CAPAB_OFF			0x0060
40 #define PCIE_CTRL_STAT_OFF		0x0068
41 #define PCIE_HEADER_LOG_4_OFF		0x0128
42 #define  PCIE_BAR_CTRL_OFF(n)		(0x1804 + (((n) - 1) * 4))
43 #define  PCIE_WIN04_CTRL_OFF(n)		(0x1820 + ((n) << 4))
44 #define  PCIE_WIN04_BASE_OFF(n)		(0x1824 + ((n) << 4))
45 #define  PCIE_WIN04_REMAP_OFF(n)	(0x182c + ((n) << 4))
46 #define PCIE_WIN5_CTRL_OFF		0x1880
47 #define PCIE_WIN5_BASE_OFF		0x1884
48 #define PCIE_WIN5_REMAP_OFF		0x188c
49 #define PCIE_CONF_ADDR_OFF		0x18f8
50 #define  PCIE_CONF_ADDR_EN		BIT(31)
51 #define  PCIE_CONF_REG(r)		((((r) & 0xf00) << 16) | ((r) & 0xfc))
52 #define  PCIE_CONF_BUS(b)		(((b) & 0xff) << 16)
53 #define  PCIE_CONF_DEV(d)		(((d) & 0x1f) << 11)
54 #define  PCIE_CONF_FUNC(f)		(((f) & 0x7) << 8)
55 #define  PCIE_CONF_ADDR(dev, reg) \
56 	(PCIE_CONF_BUS(PCI_BUS(dev)) | PCIE_CONF_DEV(PCI_DEV(dev))    | \
57 	 PCIE_CONF_FUNC(PCI_FUNC(dev)) | PCIE_CONF_REG(reg) | \
58 	 PCIE_CONF_ADDR_EN)
59 #define PCIE_CONF_DATA_OFF		0x18fc
60 #define PCIE_MASK_OFF			0x1910
61 #define  PCIE_MASK_ENABLE_INTS          (0xf << 24)
62 #define PCIE_CTRL_OFF			0x1a00
63 #define  PCIE_CTRL_X1_MODE		BIT(0)
64 #define PCIE_STAT_OFF			0x1a04
65 #define  PCIE_STAT_BUS                  (0xff << 8)
66 #define  PCIE_STAT_DEV                  (0x1f << 16)
67 #define  PCIE_STAT_LINK_DOWN		BIT(0)
68 #define PCIE_DEBUG_CTRL			0x1a60
69 #define  PCIE_DEBUG_SOFT_RESET		BIT(20)
70 
71 struct mvebu_pcie {
72 	struct pci_controller hose;
73 	void __iomem *base;
74 	void __iomem *membase;
75 	struct resource mem;
76 	void __iomem *iobase;
77 	struct resource io;
78 	u32 port;
79 	u32 lane;
80 	int devfn;
81 	u32 lane_mask;
82 	int first_busno;
83 	int local_dev;
84 	char name[16];
85 	unsigned int mem_target;
86 	unsigned int mem_attr;
87 	unsigned int io_target;
88 	unsigned int io_attr;
89 };
90 
91 /*
92  * MVEBU PCIe controller needs MEMORY and I/O BARs to be mapped
93  * into SoCs address space. Each controller will map 128M of MEM
94  * and 64K of I/O space when registered.
95  */
96 static void __iomem *mvebu_pcie_membase = (void __iomem *)MBUS_PCI_MEM_BASE;
97 #define PCIE_MEM_SIZE	(128 << 20)
98 static void __iomem *mvebu_pcie_iobase = (void __iomem *)MBUS_PCI_IO_BASE;
99 
mvebu_pcie_link_up(struct mvebu_pcie * pcie)100 static inline bool mvebu_pcie_link_up(struct mvebu_pcie *pcie)
101 {
102 	u32 val;
103 	val = readl(pcie->base + PCIE_STAT_OFF);
104 	return !(val & PCIE_STAT_LINK_DOWN);
105 }
106 
mvebu_pcie_set_local_bus_nr(struct mvebu_pcie * pcie,int busno)107 static void mvebu_pcie_set_local_bus_nr(struct mvebu_pcie *pcie, int busno)
108 {
109 	u32 stat;
110 
111 	stat = readl(pcie->base + PCIE_STAT_OFF);
112 	stat &= ~PCIE_STAT_BUS;
113 	stat |= busno << 8;
114 	writel(stat, pcie->base + PCIE_STAT_OFF);
115 }
116 
mvebu_pcie_set_local_dev_nr(struct mvebu_pcie * pcie,int devno)117 static void mvebu_pcie_set_local_dev_nr(struct mvebu_pcie *pcie, int devno)
118 {
119 	u32 stat;
120 
121 	stat = readl(pcie->base + PCIE_STAT_OFF);
122 	stat &= ~PCIE_STAT_DEV;
123 	stat |= devno << 16;
124 	writel(stat, pcie->base + PCIE_STAT_OFF);
125 }
126 
mvebu_pcie_get_local_bus_nr(struct mvebu_pcie * pcie)127 static int mvebu_pcie_get_local_bus_nr(struct mvebu_pcie *pcie)
128 {
129 	u32 stat;
130 
131 	stat = readl(pcie->base + PCIE_STAT_OFF);
132 	return (stat & PCIE_STAT_BUS) >> 8;
133 }
134 
mvebu_pcie_get_local_dev_nr(struct mvebu_pcie * pcie)135 static int mvebu_pcie_get_local_dev_nr(struct mvebu_pcie *pcie)
136 {
137 	u32 stat;
138 
139 	stat = readl(pcie->base + PCIE_STAT_OFF);
140 	return (stat & PCIE_STAT_DEV) >> 16;
141 }
142 
hose_to_pcie(struct pci_controller * hose)143 static inline struct mvebu_pcie *hose_to_pcie(struct pci_controller *hose)
144 {
145 	return container_of(hose, struct mvebu_pcie, hose);
146 }
147 
mvebu_pcie_valid_addr(struct mvebu_pcie * pcie,pci_dev_t bdf)148 static int mvebu_pcie_valid_addr(struct mvebu_pcie *pcie, pci_dev_t bdf)
149 {
150 	/*
151 	 * There are two devices visible on local bus:
152 	 *   * on slot configured by function mvebu_pcie_set_local_dev_nr()
153 	 *     (by default this register is set to 0) there is a
154 	 *     "Marvell Memory controller", which isn't useful in root complex
155 	 *     mode,
156 	 *   * on all other slots the real PCIe card connected to the PCIe slot.
157 	 *
158 	 * We therefore allow access only to the real PCIe card.
159 	 */
160 	if (PCI_BUS(bdf) == pcie->first_busno &&
161 	    PCI_DEV(bdf) != !pcie->local_dev)
162 		return 0;
163 
164 	return 1;
165 }
166 
mvebu_pcie_read_config(const struct udevice * bus,pci_dev_t bdf,uint offset,ulong * valuep,enum pci_size_t size)167 static int mvebu_pcie_read_config(const struct udevice *bus, pci_dev_t bdf,
168 				  uint offset, ulong *valuep,
169 				  enum pci_size_t size)
170 {
171 	struct mvebu_pcie *pcie = dev_get_plat(bus);
172 	u32 data;
173 
174 	debug("PCIE CFG read: (b,d,f)=(%2d,%2d,%2d) ",
175 	      PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
176 
177 	if (!mvebu_pcie_valid_addr(pcie, bdf)) {
178 		debug("- out of range\n");
179 		*valuep = pci_get_ff(size);
180 		return 0;
181 	}
182 
183 	/* write address */
184 	writel(PCIE_CONF_ADDR(bdf, offset), pcie->base + PCIE_CONF_ADDR_OFF);
185 
186 	/* read data */
187 	data = readl(pcie->base + PCIE_CONF_DATA_OFF);
188 	debug("(addr,size,val)=(0x%04x, %d, 0x%08x)\n", offset, size, data);
189 	*valuep = pci_conv_32_to_size(data, offset, size);
190 
191 	return 0;
192 }
193 
mvebu_pcie_write_config(struct udevice * bus,pci_dev_t bdf,uint offset,ulong value,enum pci_size_t size)194 static int mvebu_pcie_write_config(struct udevice *bus, pci_dev_t bdf,
195 				   uint offset, ulong value,
196 				   enum pci_size_t size)
197 {
198 	struct mvebu_pcie *pcie = dev_get_plat(bus);
199 	u32 data;
200 
201 	debug("PCIE CFG write: (b,d,f)=(%2d,%2d,%2d) ",
202 	      PCI_BUS(bdf), PCI_DEV(bdf), PCI_FUNC(bdf));
203 	debug("(addr,size,val)=(0x%04x, %d, 0x%08lx)\n", offset, size, value);
204 
205 	if (!mvebu_pcie_valid_addr(pcie, bdf)) {
206 		debug("- out of range\n");
207 		return 0;
208 	}
209 
210 	/* write address */
211 	writel(PCIE_CONF_ADDR(bdf, offset), pcie->base + PCIE_CONF_ADDR_OFF);
212 
213 	/* write data */
214 	data = pci_conv_size_to_32(0, value, offset, size);
215 	writel(data, pcie->base + PCIE_CONF_DATA_OFF);
216 
217 	return 0;
218 }
219 
220 /*
221  * Setup PCIE BARs and Address Decode Wins:
222  * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
223  * WIN[0-3] -> DRAM bank[0-3]
224  */
mvebu_pcie_setup_wins(struct mvebu_pcie * pcie)225 static void mvebu_pcie_setup_wins(struct mvebu_pcie *pcie)
226 {
227 	const struct mbus_dram_target_info *dram = mvebu_mbus_dram_info();
228 	u32 size;
229 	int i;
230 
231 	/* First, disable and clear BARs and windows. */
232 	for (i = 1; i < 3; i++) {
233 		writel(0, pcie->base + PCIE_BAR_CTRL_OFF(i));
234 		writel(0, pcie->base + PCIE_BAR_LO_OFF(i));
235 		writel(0, pcie->base + PCIE_BAR_HI_OFF(i));
236 	}
237 
238 	for (i = 0; i < 5; i++) {
239 		writel(0, pcie->base + PCIE_WIN04_CTRL_OFF(i));
240 		writel(0, pcie->base + PCIE_WIN04_BASE_OFF(i));
241 		writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
242 	}
243 
244 	writel(0, pcie->base + PCIE_WIN5_CTRL_OFF);
245 	writel(0, pcie->base + PCIE_WIN5_BASE_OFF);
246 	writel(0, pcie->base + PCIE_WIN5_REMAP_OFF);
247 
248 	/* Setup windows for DDR banks. Count total DDR size on the fly. */
249 	size = 0;
250 	for (i = 0; i < dram->num_cs; i++) {
251 		const struct mbus_dram_window *cs = dram->cs + i;
252 
253 		writel(cs->base & 0xffff0000,
254 		       pcie->base + PCIE_WIN04_BASE_OFF(i));
255 		writel(0, pcie->base + PCIE_WIN04_REMAP_OFF(i));
256 		writel(((cs->size - 1) & 0xffff0000) |
257 		       (cs->mbus_attr << 8) |
258 		       (dram->mbus_dram_target_id << 4) | 1,
259 		       pcie->base + PCIE_WIN04_CTRL_OFF(i));
260 
261 		size += cs->size;
262 	}
263 
264 	/* Round up 'size' to the nearest power of two. */
265 	if ((size & (size - 1)) != 0)
266 		size = 1 << fls(size);
267 
268 	/* Setup BAR[1] to all DRAM banks. */
269 	writel(dram->cs[0].base | 0xc, pcie->base + PCIE_BAR_LO_OFF(1));
270 	writel(0, pcie->base + PCIE_BAR_HI_OFF(1));
271 	writel(((size - 1) & 0xffff0000) | 0x1,
272 	       pcie->base + PCIE_BAR_CTRL_OFF(1));
273 }
274 
mvebu_pcie_probe(struct udevice * dev)275 static int mvebu_pcie_probe(struct udevice *dev)
276 {
277 	struct mvebu_pcie *pcie = dev_get_plat(dev);
278 	struct udevice *ctlr = pci_get_controller(dev);
279 	struct pci_controller *hose = dev_get_uclass_priv(ctlr);
280 	int bus = dev_seq(dev);
281 	u32 reg;
282 
283 	debug("%s: PCIe %d.%d - up, base %08x\n", __func__,
284 	      pcie->port, pcie->lane, (u32)pcie->base);
285 
286 	/* Read Id info and local bus/dev */
287 	debug("direct conf read %08x, local bus %d, local dev %d\n",
288 	      readl(pcie->base), mvebu_pcie_get_local_bus_nr(pcie),
289 	      mvebu_pcie_get_local_dev_nr(pcie));
290 
291 	pcie->first_busno = bus;
292 	pcie->local_dev = 1;
293 
294 	mvebu_pcie_set_local_bus_nr(pcie, bus);
295 	mvebu_pcie_set_local_dev_nr(pcie, pcie->local_dev);
296 
297 	pcie->mem.start = (u32)mvebu_pcie_membase;
298 	pcie->mem.end = pcie->mem.start + PCIE_MEM_SIZE - 1;
299 	mvebu_pcie_membase += PCIE_MEM_SIZE;
300 
301 	if (mvebu_mbus_add_window_by_id(pcie->mem_target, pcie->mem_attr,
302 					(phys_addr_t)pcie->mem.start,
303 					PCIE_MEM_SIZE)) {
304 		printf("PCIe unable to add mbus window for mem at %08x+%08x\n",
305 		       (u32)pcie->mem.start, PCIE_MEM_SIZE);
306 	}
307 
308 	pcie->io.start = (u32)mvebu_pcie_iobase;
309 	pcie->io.end = pcie->io.start + MBUS_PCI_IO_SIZE - 1;
310 	mvebu_pcie_iobase += MBUS_PCI_IO_SIZE;
311 
312 	if (mvebu_mbus_add_window_by_id(pcie->io_target, pcie->io_attr,
313 					(phys_addr_t)pcie->io.start,
314 					MBUS_PCI_IO_SIZE)) {
315 		printf("PCIe unable to add mbus window for IO at %08x+%08x\n",
316 		       (u32)pcie->io.start, MBUS_PCI_IO_SIZE);
317 	}
318 
319 	/* Setup windows and configure host bridge */
320 	mvebu_pcie_setup_wins(pcie);
321 
322 	/* Master + slave enable. */
323 	reg = readl(pcie->base + PCIE_CMD_OFF);
324 	reg |= PCI_COMMAND_MEMORY;
325 	reg |= PCI_COMMAND_IO;
326 	reg |= PCI_COMMAND_MASTER;
327 	reg |= BIT(10);		/* disable interrupts */
328 	writel(reg, pcie->base + PCIE_CMD_OFF);
329 
330 	/* PCI memory space */
331 	pci_set_region(hose->regions + 0, pcie->mem.start,
332 		       pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM);
333 	pci_set_region(hose->regions + 1,
334 		       0, 0,
335 		       gd->ram_size,
336 		       PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
337 	pci_set_region(hose->regions + 2, pcie->io.start,
338 		       pcie->io.start, MBUS_PCI_IO_SIZE, PCI_REGION_IO);
339 	hose->region_count = 3;
340 
341 	/* Set BAR0 to internal registers */
342 	writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0));
343 	writel(0, pcie->base + PCIE_BAR_HI_OFF(0));
344 
345 	return 0;
346 }
347 
mvebu_pcie_port_parse_dt(ofnode node,struct mvebu_pcie * pcie)348 static int mvebu_pcie_port_parse_dt(ofnode node, struct mvebu_pcie *pcie)
349 {
350 	const u32 *addr;
351 	int len;
352 
353 	addr = ofnode_get_property(node, "assigned-addresses", &len);
354 	if (!addr) {
355 		pr_err("property \"assigned-addresses\" not found");
356 		return -FDT_ERR_NOTFOUND;
357 	}
358 
359 	pcie->base = (void *)(fdt32_to_cpu(addr[2]) + SOC_REGS_PHY_BASE);
360 
361 	return 0;
362 }
363 
364 #define DT_FLAGS_TO_TYPE(flags)       (((flags) >> 24) & 0x03)
365 #define    DT_TYPE_IO                 0x1
366 #define    DT_TYPE_MEM32              0x2
367 #define DT_CPUADDR_TO_TARGET(cpuaddr) (((cpuaddr) >> 56) & 0xFF)
368 #define DT_CPUADDR_TO_ATTR(cpuaddr)   (((cpuaddr) >> 48) & 0xFF)
369 
mvebu_get_tgt_attr(ofnode node,int devfn,unsigned long type,unsigned int * tgt,unsigned int * attr)370 static int mvebu_get_tgt_attr(ofnode node, int devfn,
371 			      unsigned long type,
372 			      unsigned int *tgt,
373 			      unsigned int *attr)
374 {
375 	const int na = 3, ns = 2;
376 	const __be32 *range;
377 	int rlen, nranges, rangesz, pna, i;
378 
379 	*tgt = -1;
380 	*attr = -1;
381 
382 	range = ofnode_get_property(node, "ranges", &rlen);
383 	if (!range)
384 		return -EINVAL;
385 
386 	/*
387 	 * Linux uses of_n_addr_cells() to get the number of address cells
388 	 * here. Currently this function is only available in U-Boot when
389 	 * CONFIG_OF_LIVE is enabled. Until this is enabled for MVEBU in
390 	 * general, lets't hardcode the "pna" value in the U-Boot code.
391 	 */
392 	pna = 2; /* hardcoded for now because of lack of of_n_addr_cells() */
393 	rangesz = pna + na + ns;
394 	nranges = rlen / sizeof(__be32) / rangesz;
395 
396 	for (i = 0; i < nranges; i++, range += rangesz) {
397 		u32 flags = of_read_number(range, 1);
398 		u32 slot = of_read_number(range + 1, 1);
399 		u64 cpuaddr = of_read_number(range + na, pna);
400 		unsigned long rtype;
401 
402 		if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_IO)
403 			rtype = IORESOURCE_IO;
404 		else if (DT_FLAGS_TO_TYPE(flags) == DT_TYPE_MEM32)
405 			rtype = IORESOURCE_MEM;
406 		else
407 			continue;
408 
409 		/*
410 		 * The Linux code used PCI_SLOT() here, which expects devfn
411 		 * in bits 7..0. PCI_DEV() in U-Boot is similar to PCI_SLOT(),
412 		 * only expects devfn in 15..8, where its saved in this driver.
413 		 */
414 		if (slot == PCI_DEV(devfn) && type == rtype) {
415 			*tgt = DT_CPUADDR_TO_TARGET(cpuaddr);
416 			*attr = DT_CPUADDR_TO_ATTR(cpuaddr);
417 			return 0;
418 		}
419 	}
420 
421 	return -ENOENT;
422 }
423 
mvebu_pcie_of_to_plat(struct udevice * dev)424 static int mvebu_pcie_of_to_plat(struct udevice *dev)
425 {
426 	struct mvebu_pcie *pcie = dev_get_plat(dev);
427 	int ret = 0;
428 
429 	/* Get port number, lane number and memory target / attr */
430 	if (ofnode_read_u32(dev_ofnode(dev), "marvell,pcie-port",
431 			    &pcie->port)) {
432 		ret = -ENODEV;
433 		goto err;
434 	}
435 
436 	if (ofnode_read_u32(dev_ofnode(dev), "marvell,pcie-lane", &pcie->lane))
437 		pcie->lane = 0;
438 
439 	sprintf(pcie->name, "pcie%d.%d", pcie->port, pcie->lane);
440 
441 	/* pci_get_devfn() returns devfn in bits 15..8, see PCI_DEV usage */
442 	pcie->devfn = pci_get_devfn(dev);
443 	if (pcie->devfn < 0) {
444 		ret = -ENODEV;
445 		goto err;
446 	}
447 
448 	ret = mvebu_get_tgt_attr(dev_ofnode(dev->parent), pcie->devfn,
449 				 IORESOURCE_MEM,
450 				 &pcie->mem_target, &pcie->mem_attr);
451 	if (ret < 0) {
452 		printf("%s: cannot get tgt/attr for mem window\n", pcie->name);
453 		goto err;
454 	}
455 
456 	ret = mvebu_get_tgt_attr(dev_ofnode(dev->parent), pcie->devfn,
457 				 IORESOURCE_IO,
458 				 &pcie->io_target, &pcie->io_attr);
459 	if (ret < 0) {
460 		printf("%s: cannot get tgt/attr for IO window\n", pcie->name);
461 		goto err;
462 	}
463 
464 	/* Parse PCIe controller register base from DT */
465 	ret = mvebu_pcie_port_parse_dt(dev_ofnode(dev), pcie);
466 	if (ret < 0)
467 		goto err;
468 
469 	/* Check link and skip ports that have no link */
470 	if (!mvebu_pcie_link_up(pcie)) {
471 		debug("%s: %s - down\n", __func__, pcie->name);
472 		ret = -ENODEV;
473 		goto err;
474 	}
475 
476 	return 0;
477 
478 err:
479 	return ret;
480 }
481 
482 static const struct dm_pci_ops mvebu_pcie_ops = {
483 	.read_config	= mvebu_pcie_read_config,
484 	.write_config	= mvebu_pcie_write_config,
485 };
486 
487 static struct driver pcie_mvebu_drv = {
488 	.name			= "pcie_mvebu",
489 	.id			= UCLASS_PCI,
490 	.ops			= &mvebu_pcie_ops,
491 	.probe			= mvebu_pcie_probe,
492 	.of_to_plat	= mvebu_pcie_of_to_plat,
493 	.plat_auto	= sizeof(struct mvebu_pcie),
494 };
495 
496 /*
497  * Use a MISC device to bind the n instances (child nodes) of the
498  * PCIe base controller in UCLASS_PCI.
499  */
mvebu_pcie_bind(struct udevice * parent)500 static int mvebu_pcie_bind(struct udevice *parent)
501 {
502 	struct mvebu_pcie *pcie;
503 	struct uclass_driver *drv;
504 	struct udevice *dev;
505 	ofnode subnode;
506 
507 	/* Lookup eth driver */
508 	drv = lists_uclass_lookup(UCLASS_PCI);
509 	if (!drv) {
510 		puts("Cannot find PCI driver\n");
511 		return -ENOENT;
512 	}
513 
514 	ofnode_for_each_subnode(subnode, dev_ofnode(parent)) {
515 		if (!ofnode_is_available(subnode))
516 			continue;
517 
518 		pcie = calloc(1, sizeof(*pcie));
519 		if (!pcie)
520 			return -ENOMEM;
521 
522 		/* Create child device UCLASS_PCI and bind it */
523 		device_bind(parent, &pcie_mvebu_drv, pcie->name, pcie, subnode,
524 			    &dev);
525 	}
526 
527 	return 0;
528 }
529 
530 static const struct udevice_id mvebu_pcie_ids[] = {
531 	{ .compatible = "marvell,armada-xp-pcie" },
532 	{ .compatible = "marvell,armada-370-pcie" },
533 	{ }
534 };
535 
536 U_BOOT_DRIVER(pcie_mvebu_base) = {
537 	.name			= "pcie_mvebu_base",
538 	.id			= UCLASS_MISC,
539 	.of_match		= mvebu_pcie_ids,
540 	.bind			= mvebu_pcie_bind,
541 };
542