1# -*- makefile -*-
2# Makefile for Sphinx documentation
3#
4
5subdir-y :=
6
7# You can set these variables from the command line.
8SPHINXBUILD   = sphinx-build
9SPHINXOPTS    =
10SPHINXDIRS    = .
11_SPHINXDIRS   = $(patsubst $(srctree)/doc/%/conf.py,%,$(wildcard $(srctree)/doc/*/conf.py))
12SPHINX_CONF   = conf.py
13PAPER         =
14BUILDDIR      = $(obj)/output
15PDFLATEX      = xelatex
16LATEXOPTS     = -interaction=batchmode
17
18# User-friendly check for sphinx-build
19HAVE_SPHINX := $(shell if which $(SPHINXBUILD) >/dev/null 2>&1; then echo 1; else echo 0; fi)
20
21ifeq ($(HAVE_SPHINX),0)
22
23.DEFAULT:
24	$(warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.)
25	@echo
26	@./scripts/sphinx-pre-install
27	@echo "  SKIP    Sphinx $@ target."
28
29else # HAVE_SPHINX
30
31# User-friendly check for pdflatex
32HAVE_PDFLATEX := $(shell if which $(PDFLATEX) >/dev/null 2>&1; then echo 1; else echo 0; fi)
33
34# Internal variables.
35PAPEROPT_a4     = -D latex_paper_size=a4
36PAPEROPT_letter = -D latex_paper_size=letter
37KERNELDOC       = $(srctree)/scripts/kernel-doc
38KERNELDOC_CONF  = -D kerneldoc_srctree=$(srctree) -D kerneldoc_bin=$(KERNELDOC)
39ALLSPHINXOPTS   =  $(KERNELDOC_CONF) $(PAPEROPT_$(PAPER)) $(SPHINXOPTS)
40# the i18n builder cannot share the environment and doctrees with the others
41I18NSPHINXOPTS  = $(PAPEROPT_$(PAPER)) $(SPHINXOPTS) .
42
43# commands; the 'cmd' from scripts/Kbuild.include is not *loopable*
44loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit;
45
46# $2 sphinx builder e.g. "html"
47# $3 name of the build subfolder / e.g. "media", used as:
48#    * dest folder relative to $(BUILDDIR) and
49#    * cache folder relative to $(BUILDDIR)/.doctrees
50# $4 dest subfolder e.g. "man" for man pages at media/man
51# $5 reST source folder relative to $(srctree)/$(src),
52#    e.g. "media" for the linux-tv book-set at ./doc/media
53
54quiet_cmd_sphinx = SPHINX  $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
55      cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=doc/media $2 && \
56	PYTHONDONTWRITEBYTECODE=1 \
57	BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \
58	$(SPHINXBUILD) \
59	-b $2 \
60	-c $(abspath $(srctree)/$(src)) \
61	-d $(abspath $(BUILDDIR)/.doctrees/$3) \
62	-D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \
63	$(ALLSPHINXOPTS) \
64	$(abspath $(srctree)/$(src)/$5) \
65	$(abspath $(BUILDDIR)/$3/$4)
66
67htmldocs:
68	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
69
70linkcheckdocs:
71	@$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,linkcheck,$(var),,$(var)))
72
73latexdocs:
74	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,latex,$(var),latex,$(var)))
75
76ifeq ($(HAVE_PDFLATEX),0)
77
78pdfdocs:
79	$(warning The '$(PDFLATEX)' command was not found. Make sure you have it installed and in PATH to produce PDF output.)
80	@echo "  SKIP    Sphinx $@ target."
81
82else # HAVE_PDFLATEX
83
84pdfdocs: latexdocs
85	$(foreach var,$(SPHINXDIRS), $(MAKE) PDFLATEX=$(PDFLATEX) LATEXOPTS="$(LATEXOPTS)" -C $(BUILDDIR)/$(var)/latex || exit;)
86
87endif # HAVE_PDFLATEX
88
89epubdocs:
90	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,epub,$(var),epub,$(var)))
91
92xmldocs:
93	@+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,xml,$(var),xml,$(var)))
94
95endif # HAVE_SPHINX
96
97# The following targets are independent of HAVE_SPHINX, and the rules should
98# work or silently pass without Sphinx.
99
100refcheckdocs:
101	$(Q)cd $(srctree);scripts/documentation-file-ref-check
102
103cleandocs:
104	$(Q)rm -rf $(BUILDDIR)
105	$(Q)$(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=doc/media clean
106
107dochelp:
108	@echo  ' U-Boot documentation in different formats from ReST:'
109	@echo  '  htmldocs        - HTML'
110	@echo  '  latexdocs       - LaTeX'
111	@echo  '  pdfdocs         - PDF'
112	@echo  '  epubdocs        - EPUB'
113	@echo  '  xmldocs         - XML'
114	@echo  '  linkcheckdocs   - check for broken external links (will connect to external hosts)'
115	@echo  '  refcheckdocs    - check for references to non-existing files under Documentation'
116	@echo  '  cleandocs       - clean all generated files'
117	@echo
118	@echo  '  make SPHINXDIRS="s1 s2" [target] Generate only docs of folder s1, s2'
119	@echo  '  valid values for SPHINXDIRS are: $(_SPHINXDIRS)'
120	@echo
121	@echo  '  make SPHINX_CONF={conf-file} [target] use *additional* sphinx-build'
122	@echo  '  configuration. This is e.g. useful to build with nit-picking config.'
123	@echo
124	@echo  '  Default location for the generated documents is doc/output'
125