1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Device Tree Source for the ebisu board
4 *
5 * Copyright (C) 2018 Renesas Electronics Corp.
6 */
7
8/dts-v1/;
9#include "r8a77990.dtsi"
10#include <dt-bindings/gpio/gpio.h>
11
12/ {
13	model = "Renesas Ebisu board based on r8a77990";
14	compatible = "renesas,ebisu", "renesas,r8a77990";
15
16	aliases {
17		serial0 = &scif2;
18		ethernet0 = &avb;
19	};
20
21	chosen {
22		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
23		stdout-path = "serial0:115200n8";
24	};
25
26	audio_clkout: audio-clkout {
27		/*
28		 * This is same as <&rcar_sound 0>
29		 * but needed to avoid cs2000/rcar_sound probe dead-lock
30		 */
31		compatible = "fixed-clock";
32		#clock-cells = <0>;
33		clock-frequency = <11289600>;
34	};
35
36	backlight: backlight {
37		compatible = "pwm-backlight";
38		pwms = <&pwm3 0 50000>;
39
40		brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
41		default-brightness-level = <10>;
42
43		power-supply = <&reg_12p0v>;
44	};
45
46	cvbs-in {
47		compatible = "composite-video-connector";
48		label = "CVBS IN";
49
50		port {
51			cvbs_con: endpoint {
52				remote-endpoint = <&adv7482_ain7>;
53			};
54		};
55	};
56
57	hdmi-in {
58		compatible = "hdmi-connector";
59		label = "HDMI IN";
60		type = "a";
61
62		port {
63			hdmi_in_con: endpoint {
64				remote-endpoint = <&adv7482_hdmi>;
65			};
66		};
67	};
68
69	hdmi-out {
70		compatible = "hdmi-connector";
71		type = "a";
72
73		port {
74			hdmi_con_out: endpoint {
75				remote-endpoint = <&adv7511_out>;
76			};
77		};
78	};
79
80	lvds-decoder {
81		compatible = "thine,thc63lvd1024";
82		vcc-supply = <&reg_3p3v>;
83
84		ports {
85			#address-cells = <1>;
86			#size-cells = <0>;
87
88			port@0 {
89				reg = <0>;
90				thc63lvd1024_in: endpoint {
91					remote-endpoint = <&lvds0_out>;
92				};
93			};
94
95			port@2 {
96				reg = <2>;
97				thc63lvd1024_out: endpoint {
98					remote-endpoint = <&adv7511_in>;
99				};
100			};
101		};
102	};
103
104	memory@48000000 {
105		device_type = "memory";
106		/* first 128MB is reserved for secure area. */
107		reg = <0x0 0x48000000 0x0 0x38000000>;
108	};
109
110	reg_1p8v: regulator0 {
111		compatible = "regulator-fixed";
112		regulator-name = "fixed-1.8V";
113		regulator-min-microvolt = <1800000>;
114		regulator-max-microvolt = <1800000>;
115		regulator-boot-on;
116		regulator-always-on;
117	};
118
119	reg_3p3v: regulator1 {
120		compatible = "regulator-fixed";
121		regulator-name = "fixed-3.3V";
122		regulator-min-microvolt = <3300000>;
123		regulator-max-microvolt = <3300000>;
124		regulator-boot-on;
125		regulator-always-on;
126	};
127
128	reg_12p0v: regulator2 {
129		compatible = "regulator-fixed";
130		regulator-name = "D12.0V";
131		regulator-min-microvolt = <12000000>;
132		regulator-max-microvolt = <12000000>;
133		regulator-boot-on;
134		regulator-always-on;
135	};
136
137	rsnd_ak4613: sound {
138		compatible = "simple-audio-card";
139
140		simple-audio-card,name = "rsnd-ak4613";
141		simple-audio-card,format = "left_j";
142		simple-audio-card,bitclock-master = <&sndcpu>;
143		simple-audio-card,frame-master = <&sndcpu>;
144
145		sndcodec: simple-audio-card,codec {
146			sound-dai = <&ak4613>;
147		};
148
149		sndcpu: simple-audio-card,cpu {
150			sound-dai = <&rcar_sound>;
151		};
152	};
153
154	vbus0_usb2: regulator-vbus0-usb2 {
155		compatible = "regulator-fixed";
156
157		regulator-name = "USB20_VBUS_CN";
158		regulator-min-microvolt = <5000000>;
159		regulator-max-microvolt = <5000000>;
160
161		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
162		enable-active-high;
163	};
164
165	vcc_sdhi0: regulator-vcc-sdhi0 {
166		compatible = "regulator-fixed";
167
168		regulator-name = "SDHI0 Vcc";
169		regulator-min-microvolt = <3300000>;
170		regulator-max-microvolt = <3300000>;
171
172		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
173		enable-active-high;
174	};
175
176	vccq_sdhi0: regulator-vccq-sdhi0 {
177		compatible = "regulator-gpio";
178
179		regulator-name = "SDHI0 VccQ";
180		regulator-min-microvolt = <1800000>;
181		regulator-max-microvolt = <3300000>;
182
183		gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
184		gpios-states = <1>;
185		states = <3300000 1>, <1800000 0>;
186	};
187
188	vcc_sdhi1: regulator-vcc-sdhi1 {
189		compatible = "regulator-fixed";
190
191		regulator-name = "SDHI1 Vcc";
192		regulator-min-microvolt = <3300000>;
193		regulator-max-microvolt = <3300000>;
194
195		gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
196		enable-active-high;
197	};
198
199	vccq_sdhi1: regulator-vccq-sdhi1 {
200		compatible = "regulator-gpio";
201
202		regulator-name = "SDHI1 VccQ";
203		regulator-min-microvolt = <1800000>;
204		regulator-max-microvolt = <3300000>;
205
206		gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
207		gpios-states = <1>;
208		states = <3300000 1>, <1800000 0>;
209	};
210
211	vga {
212		compatible = "vga-connector";
213
214		port {
215			vga_in: endpoint {
216				remote-endpoint = <&adv7123_out>;
217			};
218		};
219	};
220
221	vga-encoder {
222		compatible = "adi,adv7123";
223
224		ports {
225			#address-cells = <1>;
226			#size-cells = <0>;
227
228			port@0 {
229				reg = <0>;
230				adv7123_in: endpoint {
231					remote-endpoint = <&du_out_rgb>;
232				};
233			};
234			port@1 {
235				reg = <1>;
236				adv7123_out: endpoint {
237					remote-endpoint = <&vga_in>;
238				};
239			};
240		};
241	};
242
243	x12_clk: x12 {
244		compatible = "fixed-clock";
245		#clock-cells = <0>;
246		clock-frequency = <24576000>;
247	};
248
249	x13_clk: x13 {
250		compatible = "fixed-clock";
251		#clock-cells = <0>;
252		clock-frequency = <74250000>;
253	};
254};
255
256&audio_clk_a {
257	clock-frequency = <22579200>;
258};
259
260&avb {
261	pinctrl-0 = <&avb_pins>;
262	pinctrl-names = "default";
263	phy-handle = <&phy0>;
264	status = "okay";
265
266	phy0: ethernet-phy@0 {
267		rxc-skew-ps = <1500>;
268		reg = <0>;
269		interrupt-parent = <&gpio2>;
270		interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
271		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
272		/*
273		 * TX clock internal delay mode is required for reliable
274		 * 1Gbps communication using the KSZ9031RNX phy present on
275		 * the Ebisu board, however, TX clock internal delay mode
276		 * isn't supported on r8a77990.  Thus, limit speed to
277		 * 100Mbps for reliable communication.
278		 */
279		max-speed = <100>;
280	};
281};
282
283&canfd {
284	pinctrl-0 = <&canfd0_pins>;
285	pinctrl-names = "default";
286	status = "okay";
287
288	channel0 {
289		status = "okay";
290	};
291};
292
293&csi40 {
294	status = "okay";
295
296	ports {
297		port@0 {
298			reg = <0>;
299
300			csi40_in: endpoint {
301				clock-lanes = <0>;
302				data-lanes = <1 2>;
303				remote-endpoint = <&adv7482_txa>;
304			};
305		};
306	};
307};
308
309&du {
310	pinctrl-0 = <&du_pins>;
311	pinctrl-names = "default";
312	status = "okay";
313
314	clocks = <&cpg CPG_MOD 724>,
315		 <&cpg CPG_MOD 723>,
316		 <&x13_clk>;
317	clock-names = "du.0", "du.1", "dclkin.0";
318
319	ports {
320		port@0 {
321			endpoint {
322				remote-endpoint = <&adv7123_in>;
323			};
324		};
325	};
326};
327
328&ehci0 {
329	dr_mode = "otg";
330	status = "okay";
331};
332
333&extal_clk {
334	clock-frequency = <48000000>;
335};
336
337&hsusb {
338	dr_mode = "otg";
339	status = "okay";
340};
341
342&i2c0 {
343	status = "okay";
344
345	io_expander: gpio@20 {
346		compatible = "onnn,pca9654";
347		reg = <0x20>;
348		gpio-controller;
349		#gpio-cells = <2>;
350		interrupt-parent = <&gpio2>;
351		interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
352	};
353
354	hdmi-encoder@39 {
355		compatible = "adi,adv7511w";
356		reg = <0x39>;
357		interrupt-parent = <&gpio1>;
358		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
359
360		adi,input-depth = <8>;
361		adi,input-colorspace = "rgb";
362		adi,input-clock = "1x";
363		adi,input-style = <1>;
364		adi,input-justification = "evenly";
365
366		ports {
367			#address-cells = <1>;
368			#size-cells = <0>;
369
370			port@0 {
371				reg = <0>;
372				adv7511_in: endpoint {
373					remote-endpoint = <&thc63lvd1024_out>;
374				};
375			};
376
377			port@1 {
378				reg = <1>;
379				adv7511_out: endpoint {
380					remote-endpoint = <&hdmi_con_out>;
381				};
382			};
383		};
384	};
385
386	video-receiver@70 {
387		compatible = "adi,adv7482";
388		reg = <0x70>;
389
390		#address-cells = <1>;
391		#size-cells = <0>;
392
393		interrupt-parent = <&gpio0>;
394		interrupt-names = "intrq1", "intrq2";
395		interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
396			     <17 IRQ_TYPE_LEVEL_LOW>;
397
398		port@7 {
399			reg = <7>;
400
401			adv7482_ain7: endpoint {
402				remote-endpoint = <&cvbs_con>;
403			};
404		};
405
406		port@8 {
407			reg = <8>;
408
409			adv7482_hdmi: endpoint {
410				remote-endpoint = <&hdmi_in_con>;
411			};
412		};
413
414		port@a {
415			reg = <10>;
416
417			adv7482_txa: endpoint {
418				clock-lanes = <0>;
419				data-lanes = <1 2>;
420				remote-endpoint = <&csi40_in>;
421			};
422		};
423	};
424};
425
426&i2c3 {
427	status = "okay";
428
429	ak4613: codec@10 {
430		compatible = "asahi-kasei,ak4613";
431		#sound-dai-cells = <0>;
432		reg = <0x10>;
433		clocks = <&rcar_sound 3>;
434
435		asahi-kasei,in1-single-end;
436		asahi-kasei,in2-single-end;
437		asahi-kasei,out1-single-end;
438		asahi-kasei,out2-single-end;
439		asahi-kasei,out3-single-end;
440		asahi-kasei,out4-single-end;
441		asahi-kasei,out5-single-end;
442		asahi-kasei,out6-single-end;
443	};
444
445	cs2000: clk-multiplier@4f {
446		#clock-cells = <0>;
447		compatible = "cirrus,cs2000-cp";
448		reg = <0x4f>;
449		clocks = <&audio_clkout>, <&x12_clk>;
450		clock-names = "clk_in", "ref_clk";
451
452		assigned-clocks = <&cs2000>;
453		assigned-clock-rates = <24576000>; /* 1/1 divide */
454	};
455};
456
457&i2c_dvfs {
458	status = "okay";
459
460	clock-frequency = <400000>;
461
462	pmic: pmic@30 {
463		pinctrl-0 = <&irq0_pins>;
464		pinctrl-names = "default";
465
466		compatible = "rohm,bd9571mwv";
467		reg = <0x30>;
468		interrupt-parent = <&intc_ex>;
469		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
470		interrupt-controller;
471		#interrupt-cells = <2>;
472		gpio-controller;
473		#gpio-cells = <2>;
474		rohm,ddr-backup-power = <0x1>;
475		rohm,rstbmode-level;
476	};
477};
478
479&lvds0 {
480	status = "okay";
481
482	clocks = <&cpg CPG_MOD 727>,
483		 <&x13_clk>,
484		 <&extal_clk>;
485	clock-names = "fck", "dclkin.0", "extal";
486
487	ports {
488		port@1 {
489			lvds0_out: endpoint {
490				remote-endpoint = <&thc63lvd1024_in>;
491			};
492		};
493	};
494};
495
496&lvds1 {
497	/*
498	 * Even though the LVDS1 output is not connected, the encoder must be
499	 * enabled to supply a pixel clock to the DU for the DPAD output when
500	 * LVDS0 is in use.
501	 */
502	status = "okay";
503
504	clocks = <&cpg CPG_MOD 727>,
505		 <&x13_clk>,
506		 <&extal_clk>;
507	clock-names = "fck", "dclkin.0", "extal";
508};
509
510&ohci0 {
511	dr_mode = "otg";
512	status = "okay";
513};
514
515&pcie_bus_clk {
516	clock-frequency = <100000000>;
517};
518
519&pciec0 {
520	status = "okay";
521};
522
523&pfc {
524	avb_pins: avb {
525		mux {
526			groups = "avb_link", "avb_mii";
527			function = "avb";
528		};
529	};
530
531	canfd0_pins: canfd0 {
532		groups = "canfd0_data";
533		function = "canfd0";
534	};
535
536	du_pins: du {
537		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
538		function = "du";
539	};
540
541	irq0_pins: irq0 {
542		groups = "intc_ex_irq0";
543		function = "intc_ex";
544	};
545
546	pwm3_pins: pwm3 {
547		groups = "pwm3_b";
548		function = "pwm3";
549	};
550
551	pwm5_pins: pwm5 {
552		groups = "pwm5_a";
553		function = "pwm5";
554	};
555
556	scif2_pins: scif2 {
557		groups = "scif2_data_a";
558		function = "scif2";
559	};
560
561	sdhi0_pins: sd0 {
562		groups = "sdhi0_data4", "sdhi0_ctrl";
563		function = "sdhi0";
564		power-source = <3300>;
565	};
566
567	sdhi0_pins_uhs: sd0_uhs {
568		groups = "sdhi0_data4", "sdhi0_ctrl";
569		function = "sdhi0";
570		power-source = <1800>;
571	};
572
573	sdhi1_pins: sd1 {
574		groups = "sdhi1_data4", "sdhi1_ctrl";
575		function = "sdhi1";
576		power-source = <3300>;
577	};
578
579	sdhi1_pins_uhs: sd1_uhs {
580		groups = "sdhi1_data4", "sdhi1_ctrl";
581		function = "sdhi1";
582		power-source = <1800>;
583	};
584
585	sdhi3_pins: sd3 {
586		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
587		function = "sdhi3";
588		power-source = <1800>;
589	};
590
591	sound_clk_pins: sound_clk {
592		groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
593			 "audio_clkout_a", "audio_clkout1_a";
594		function = "audio_clk";
595	};
596
597	sound_pins: sound {
598		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
599		function = "ssi";
600	};
601
602	usb0_pins: usb {
603		groups = "usb0_b", "usb0_id";
604		function = "usb0";
605	};
606
607	usb30_pins: usb30 {
608		groups = "usb30";
609		function = "usb30";
610	};
611};
612
613&pwm3 {
614	pinctrl-0 = <&pwm3_pins>;
615	pinctrl-names = "default";
616
617	status = "okay";
618};
619
620&pwm5 {
621	pinctrl-0 = <&pwm5_pins>;
622	pinctrl-names = "default";
623
624	status = "okay";
625};
626
627&rcar_sound {
628	pinctrl-0 = <&sound_pins &sound_clk_pins>;
629	pinctrl-names = "default";
630
631	/* Single DAI */
632	#sound-dai-cells = <0>;
633
634	/* audio_clkout0/1/2/3 */
635	#clock-cells = <1>;
636	clock-frequency = <12288000 11289600>;
637
638	status = "okay";
639
640	/* update <audio_clk_b> to <cs2000> */
641	clocks = <&cpg CPG_MOD 1005>,
642		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
643		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
644		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
645		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
646		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
647		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
648		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
649		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
650		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
651		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
652		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
653		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
654		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
655		 <&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
656		 <&cpg CPG_CORE R8A77990_CLK_ZA2>;
657
658	rcar_sound,dai {
659		dai0 {
660			playback = <&ssi0 &src0 &dvc0>;
661			capture  = <&ssi1 &src1 &dvc1>;
662		};
663	};
664
665};
666
667&rwdt {
668	timeout-sec = <60>;
669	status = "okay";
670};
671
672&scif2 {
673	pinctrl-0 = <&scif2_pins>;
674	pinctrl-names = "default";
675
676	status = "okay";
677};
678
679&sdhi0 {
680	pinctrl-0 = <&sdhi0_pins>;
681	pinctrl-1 = <&sdhi0_pins_uhs>;
682	pinctrl-names = "default", "state_uhs";
683
684	vmmc-supply = <&vcc_sdhi0>;
685	vqmmc-supply = <&vccq_sdhi0>;
686	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
687	wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
688	bus-width = <4>;
689	sd-uhs-sdr50;
690	sd-uhs-sdr104;
691	status = "okay";
692};
693
694&sdhi1 {
695	pinctrl-0 = <&sdhi1_pins>;
696	pinctrl-1 = <&sdhi1_pins_uhs>;
697	pinctrl-names = "default", "state_uhs";
698
699	vmmc-supply = <&vcc_sdhi1>;
700	vqmmc-supply = <&vccq_sdhi1>;
701	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
702	bus-width = <4>;
703	sd-uhs-sdr50;
704	sd-uhs-sdr104;
705	status = "okay";
706};
707
708&sdhi3 {
709	/* used for on-board 8bit eMMC */
710	pinctrl-0 = <&sdhi3_pins>;
711	pinctrl-1 = <&sdhi3_pins>;
712	pinctrl-names = "default", "state_uhs";
713
714	vmmc-supply = <&reg_3p3v>;
715	vqmmc-supply = <&reg_1p8v>;
716	mmc-ddr-1_8v;
717	mmc-hs200-1_8v;
718	mmc-hs400-1_8v;
719	bus-width = <8>;
720	non-removable;
721	status = "okay";
722};
723
724&ssi1 {
725	shared-pin;
726};
727
728&usb2_phy0 {
729	pinctrl-0 = <&usb0_pins>;
730	pinctrl-names = "default";
731
732	vbus-supply = <&vbus0_usb2>;
733	status = "okay";
734};
735
736&usb3_peri0 {
737	companion = <&xhci0>;
738	status = "okay";
739};
740
741&vin4 {
742	status = "okay";
743};
744
745&vin5 {
746	status = "okay";
747};
748
749&xhci0 {
750	pinctrl-0 = <&usb30_pins>;
751	pinctrl-names = "default";
752
753	status = "okay";
754};
755