1/*
2 * Copyright 2015 Marcus Cooper <codekipper@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 *  a) This file is free software; you can redistribute it and/or
10 *     modify it under the terms of the GNU General Public License as
11 *     published by the Free Software Foundation; either version 2 of the
12 *     License, or (at your option) any later version.
13 *
14 *     This file is distributed in the hope that it will be useful,
15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17 *     GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 *  b) Permission is hereby granted, free of charge, to any person
22 *     obtaining a copy of this software and associated documentation
23 *     files (the "Software"), to deal in the Software without
24 *     restriction, including without limitation the rights to use,
25 *     copy, modify, merge, publish, distribute, sublicense, and/or
26 *     sell copies of the Software, and to permit persons to whom the
27 *     Software is furnished to do so, subject to the following
28 *     conditions:
29 *
30 *     The above copyright notice and this permission notice shall be
31 *     included in all copies or substantial portions of the Software.
32 *
33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 *     OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun6i-a31.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48
49/ {
50	model = "Mele I7 Quad top set box";
51	compatible = "mele,i7", "allwinner,sun6i-a31";
52
53	aliases {
54		serial0 = &uart0;
55	};
56
57	chosen {
58		stdout-path = "serial0:115200n8";
59	};
60
61	hdmi-connector {
62		compatible = "hdmi-connector";
63		type = "a";
64
65		port {
66			hdmi_con_in: endpoint {
67				remote-endpoint = <&hdmi_out_con>;
68			};
69		};
70	};
71
72	leds {
73		compatible = "gpio-leds";
74		pinctrl-names = "default";
75		pinctrl-0 = <&led_pins_i7>;
76
77		blue {
78			label = "i7:blue:usr";
79			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
80		};
81	};
82
83	sound {
84		compatible = "simple-audio-card";
85		simple-audio-card,name = "On-board SPDIF";
86		simple-audio-card,cpu {
87			sound-dai = <&spdif>;
88		};
89
90		simple-audio-card,codec {
91			sound-dai = <&spdif_out>;
92		};
93	};
94
95	spdif_out: spdif-out {
96		#sound-dai-cells = <0>;
97		compatible = "linux,spdif-dit";
98	};
99};
100
101&codec {
102	allwinner,audio-routing =
103		"Headphone", "HP";
104	status = "okay";
105};
106
107&de {
108	status = "okay";
109};
110
111&ehci0 {
112	status = "okay";
113};
114
115&ehci1 {
116	status = "okay";
117};
118
119&gmac {
120	pinctrl-names = "default";
121	pinctrl-0 = <&gmac_pins_mii_a>;
122	phy = <&phy1>;
123	phy-mode = "mii";
124	status = "okay";
125
126	phy1: ethernet-phy@1 {
127		reg = <1>;
128	};
129};
130
131&hdmi {
132	status = "okay";
133};
134
135&hdmi_out {
136	hdmi_out_con: endpoint {
137		remote-endpoint = <&hdmi_con_in>;
138	};
139};
140
141&ir {
142	pinctrl-names = "default";
143	pinctrl-0 = <&ir_pins_a>;
144	status = "okay";
145};
146
147&mmc0 {
148	pinctrl-names = "default";
149	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
150	vmmc-supply = <&reg_vcc3v3>;
151	bus-width = <4>;
152	cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */
153	status = "okay";
154};
155
156&pio {
157	led_pins_i7: led_pins@0 {
158		pins = "PH13";
159		function = "gpio_out";
160	};
161
162	mmc0_cd_pin_i7: mmc0_cd_pin@0 {
163		pins = "PH22";
164		function = "gpio_in";
165		bias-pull-up;
166	};
167
168	usb1_vbus_pin_i7: usb1_vbus_pin@0 {
169		pins = "PC27";
170		function = "gpio_out";
171	};
172};
173
174&reg_usb1_vbus {
175	pinctrl-names = "default";
176	pinctrl-0 = <&usb1_vbus_pin_i7>;
177	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
178	status = "okay";
179};
180
181&spdif {
182	pinctrl-names = "default";
183	pinctrl-0 = <&spdif_pins_a>;
184	spdif-out = "okay";
185	status = "okay";
186};
187
188&tcon0 {
189	status = "okay";
190};
191
192&uart0 {
193	pinctrl-names = "default";
194	pinctrl-0 = <&uart0_pins_a>;
195	status = "okay";
196};
197
198&usbphy {
199	usb1_vbus-supply = <&reg_usb1_vbus>;
200	status = "okay";
201};
202