1 /*
2 * Most of this source has been derived from the Linux USB
3 * project:
4 * (C) Copyright Linus Torvalds 1999
5 * (C) Copyright Johannes Erdfelt 1999-2001
6 * (C) Copyright Andreas Gal 1999
7 * (C) Copyright Gregory P. Smith 1999
8 * (C) Copyright Deti Fliegl 1999 (new USB architecture)
9 * (C) Copyright Randy Dunlap 2000
10 * (C) Copyright David Brownell 2000 (kernel hotplug, usb_device_id)
11 * (C) Copyright Yggdrasil Computing, Inc. 2000
12 * (usb_device_id matching changes by Adam J. Richter)
13 *
14 * Adapted for U-Boot:
15 * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
16 *
17 * SPDX-License-Identifier: GPL-2.0+
18 */
19
20 /****************************************************************************
21 * HUB "Driver"
22 * Probes device for being a hub and configurate it
23 */
24
25 #include <common.h>
26 #include <command.h>
27 #include <dm.h>
28 #include <errno.h>
29 #include <asm/processor.h>
30 #include <asm/unaligned.h>
31 #include <linux/ctype.h>
32 #include <asm/byteorder.h>
33 #include <asm/unaligned.h>
34 #include <dm/root.h>
35
36 DECLARE_GLOBAL_DATA_PTR;
37
38 #include <usb.h>
39 #ifdef CONFIG_4xx
40 #include <asm/4xx_pci.h>
41 #endif
42
43 #define USB_BUFSIZ 512
44
45 /* TODO(sjg@chromium.org): Remove this when CONFIG_DM_USB is defined */
46 static struct usb_hub_device hub_dev[USB_MAX_HUB];
47 static int usb_hub_index;
48
usb_hub_reset_devices(int port)49 __weak void usb_hub_reset_devices(int port)
50 {
51 return;
52 }
53
usb_get_hub_descriptor(struct usb_device * dev,void * data,int size)54 static int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size)
55 {
56 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
57 USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
58 USB_DT_HUB << 8, 0, data, size, USB_CNTL_TIMEOUT);
59 }
60
usb_clear_port_feature(struct usb_device * dev,int port,int feature)61 static int usb_clear_port_feature(struct usb_device *dev, int port, int feature)
62 {
63 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
64 USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature,
65 port, NULL, 0, USB_CNTL_TIMEOUT);
66 }
67
usb_set_port_feature(struct usb_device * dev,int port,int feature)68 static int usb_set_port_feature(struct usb_device *dev, int port, int feature)
69 {
70 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
71 USB_REQ_SET_FEATURE, USB_RT_PORT, feature,
72 port, NULL, 0, USB_CNTL_TIMEOUT);
73 }
74
usb_get_hub_status(struct usb_device * dev,void * data)75 static int usb_get_hub_status(struct usb_device *dev, void *data)
76 {
77 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
78 USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
79 data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT);
80 }
81
usb_get_port_status(struct usb_device * dev,int port,void * data)82 int usb_get_port_status(struct usb_device *dev, int port, void *data)
83 {
84 return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
85 USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port,
86 data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT);
87 }
88
89
usb_hub_power_on(struct usb_hub_device * hub)90 static void usb_hub_power_on(struct usb_hub_device *hub)
91 {
92 int i;
93 struct usb_device *dev;
94 unsigned pgood_delay = hub->desc.bPwrOn2PwrGood * 2;
95 const char *env;
96
97 dev = hub->pusb_dev;
98
99 debug("enabling power on all ports\n");
100 for (i = 0; i < dev->maxchild; i++) {
101 usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
102 debug("port %d returns %lX\n", i + 1, dev->status);
103 }
104
105 /*
106 * Wait for power to become stable,
107 * plus spec-defined max time for device to connect
108 * but allow this time to be increased via env variable as some
109 * devices break the spec and require longer warm-up times
110 */
111 env = getenv("usb_pgood_delay");
112 if (env)
113 pgood_delay = max(pgood_delay,
114 (unsigned)simple_strtol(env, NULL, 0));
115 debug("pgood_delay=%dms\n", pgood_delay);
116 mdelay(pgood_delay + 1000);
117 }
118
usb_hub_reset(void)119 void usb_hub_reset(void)
120 {
121 usb_hub_index = 0;
122 }
123
usb_hub_allocate(void)124 static struct usb_hub_device *usb_hub_allocate(void)
125 {
126 if (usb_hub_index < USB_MAX_HUB)
127 return &hub_dev[usb_hub_index++];
128
129 printf("ERROR: USB_MAX_HUB (%d) reached\n", USB_MAX_HUB);
130 return NULL;
131 }
132
133 #define MAX_TRIES 5
134
portspeed(int portstatus)135 static inline char *portspeed(int portstatus)
136 {
137 char *speed_str;
138
139 switch (portstatus & USB_PORT_STAT_SPEED_MASK) {
140 case USB_PORT_STAT_SUPER_SPEED:
141 speed_str = "5 Gb/s";
142 break;
143 case USB_PORT_STAT_HIGH_SPEED:
144 speed_str = "480 Mb/s";
145 break;
146 case USB_PORT_STAT_LOW_SPEED:
147 speed_str = "1.5 Mb/s";
148 break;
149 default:
150 speed_str = "12 Mb/s";
151 break;
152 }
153
154 return speed_str;
155 }
156
legacy_hub_port_reset(struct usb_device * dev,int port,unsigned short * portstat)157 int legacy_hub_port_reset(struct usb_device *dev, int port,
158 unsigned short *portstat)
159 {
160 int err, tries;
161 ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
162 unsigned short portstatus, portchange;
163
164 #ifdef CONFIG_DM_USB
165 debug("%s: resetting '%s' port %d...\n", __func__, dev->dev->name,
166 port + 1);
167 #else
168 debug("%s: resetting port %d...\n", __func__, port + 1);
169 #endif
170 for (tries = 0; tries < MAX_TRIES; tries++) {
171 err = usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET);
172 if (err < 0)
173 return err;
174
175 mdelay(200);
176
177 if (usb_get_port_status(dev, port + 1, portsts) < 0) {
178 debug("get_port_status failed status %lX\n",
179 dev->status);
180 return -1;
181 }
182 portstatus = le16_to_cpu(portsts->wPortStatus);
183 portchange = le16_to_cpu(portsts->wPortChange);
184
185 debug("portstatus %x, change %x, %s\n", portstatus, portchange,
186 portspeed(portstatus));
187
188 debug("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \
189 " USB_PORT_STAT_ENABLE %d\n",
190 (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0,
191 (portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0,
192 (portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0);
193
194 /*
195 * Perhaps we should check for the following here:
196 * - C_CONNECTION hasn't been set.
197 * - CONNECTION is still set.
198 *
199 * Doing so would ensure that the device is still connected
200 * to the bus, and hasn't been unplugged or replaced while the
201 * USB bus reset was going on.
202 *
203 * However, if we do that, then (at least) a San Disk Ultra
204 * USB 3.0 16GB device fails to reset on (at least) an NVIDIA
205 * Tegra Jetson TK1 board. For some reason, the device appears
206 * to briefly drop off the bus when this second bus reset is
207 * executed, yet if we retry this loop, it'll eventually come
208 * back after another reset or two.
209 */
210
211 if (portstatus & USB_PORT_STAT_ENABLE)
212 break;
213
214 mdelay(200);
215 }
216
217 if (tries == MAX_TRIES) {
218 debug("Cannot enable port %i after %i retries, " \
219 "disabling port.\n", port + 1, MAX_TRIES);
220 debug("Maybe the USB cable is bad?\n");
221 return -1;
222 }
223
224 usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_RESET);
225 *portstat = portstatus;
226 return 0;
227 }
228
229 #ifdef CONFIG_DM_USB
hub_port_reset(struct udevice * dev,int port,unsigned short * portstat)230 int hub_port_reset(struct udevice *dev, int port, unsigned short *portstat)
231 {
232 struct usb_device *udev = dev_get_parentdata(dev);
233
234 return legacy_hub_port_reset(udev, port, portstat);
235 }
236 #endif
237
usb_hub_port_connect_change(struct usb_device * dev,int port)238 int usb_hub_port_connect_change(struct usb_device *dev, int port)
239 {
240 ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
241 unsigned short portstatus;
242 int ret, speed;
243
244 /* Check status */
245 ret = usb_get_port_status(dev, port + 1, portsts);
246 if (ret < 0) {
247 debug("get_port_status failed\n");
248 return ret;
249 }
250
251 portstatus = le16_to_cpu(portsts->wPortStatus);
252 debug("portstatus %x, change %x, %s\n",
253 portstatus,
254 le16_to_cpu(portsts->wPortChange),
255 portspeed(portstatus));
256
257 /* Clear the connection change status */
258 usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION);
259
260 /* Disconnect any existing devices under this port */
261 if (((!(portstatus & USB_PORT_STAT_CONNECTION)) &&
262 (!(portstatus & USB_PORT_STAT_ENABLE))) ||
263 usb_device_has_child_on_port(dev, port)) {
264 debug("usb_disconnect(&hub->children[port]);\n");
265 /* Return now if nothing is connected */
266 if (!(portstatus & USB_PORT_STAT_CONNECTION))
267 return -ENOTCONN;
268 }
269 mdelay(200);
270
271 /* Reset the port */
272 ret = legacy_hub_port_reset(dev, port, &portstatus);
273 if (ret < 0) {
274 if (ret != -ENXIO)
275 printf("cannot reset port %i!?\n", port + 1);
276 return ret;
277 }
278
279 mdelay(200);
280
281 switch (portstatus & USB_PORT_STAT_SPEED_MASK) {
282 case USB_PORT_STAT_SUPER_SPEED:
283 speed = USB_SPEED_SUPER;
284 break;
285 case USB_PORT_STAT_HIGH_SPEED:
286 speed = USB_SPEED_HIGH;
287 break;
288 case USB_PORT_STAT_LOW_SPEED:
289 speed = USB_SPEED_LOW;
290 break;
291 default:
292 speed = USB_SPEED_FULL;
293 break;
294 }
295
296 #ifdef CONFIG_DM_USB
297 struct udevice *child;
298
299 ret = usb_scan_device(dev->dev, port + 1, speed, &child);
300 #else
301 struct usb_device *usb;
302
303 ret = usb_alloc_new_device(dev->controller, &usb);
304 if (ret) {
305 printf("cannot create new device: ret=%d", ret);
306 return ret;
307 }
308
309 dev->children[port] = usb;
310 usb->speed = speed;
311 usb->parent = dev;
312 usb->portnr = port + 1;
313 /* Run it through the hoops (find a driver, etc) */
314 ret = usb_new_device(usb);
315 if (ret < 0) {
316 /* Woops, disable the port */
317 usb_free_device(dev->controller);
318 dev->children[port] = NULL;
319 }
320 #endif
321 if (ret < 0) {
322 debug("hub: disabling port %d\n", port + 1);
323 usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_ENABLE);
324 }
325
326 return ret;
327 }
328
329
usb_hub_configure(struct usb_device * dev)330 static int usb_hub_configure(struct usb_device *dev)
331 {
332 int i, length;
333 ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ);
334 unsigned char *bitmap;
335 short hubCharacteristics;
336 struct usb_hub_descriptor *descriptor;
337 struct usb_hub_device *hub;
338 __maybe_unused struct usb_hub_status *hubsts;
339 int ret;
340
341 /* "allocate" Hub device */
342 hub = usb_hub_allocate();
343 if (hub == NULL)
344 return -ENOMEM;
345 hub->pusb_dev = dev;
346 /* Get the the hub descriptor */
347 ret = usb_get_hub_descriptor(dev, buffer, 4);
348 if (ret < 0) {
349 debug("usb_hub_configure: failed to get hub " \
350 "descriptor, giving up %lX\n", dev->status);
351 return ret;
352 }
353 descriptor = (struct usb_hub_descriptor *)buffer;
354
355 length = min_t(int, descriptor->bLength,
356 sizeof(struct usb_hub_descriptor));
357
358 ret = usb_get_hub_descriptor(dev, buffer, length);
359 if (ret < 0) {
360 debug("usb_hub_configure: failed to get hub " \
361 "descriptor 2nd giving up %lX\n", dev->status);
362 return ret;
363 }
364 memcpy((unsigned char *)&hub->desc, buffer, length);
365 /* adjust 16bit values */
366 put_unaligned(le16_to_cpu(get_unaligned(
367 &descriptor->wHubCharacteristics)),
368 &hub->desc.wHubCharacteristics);
369 /* set the bitmap */
370 bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0];
371 /* devices not removable by default */
372 memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8);
373 bitmap = (unsigned char *)&hub->desc.PortPowerCtrlMask[0];
374 memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */
375
376 for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
377 hub->desc.DeviceRemovable[i] = descriptor->DeviceRemovable[i];
378
379 for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
380 hub->desc.PortPowerCtrlMask[i] = descriptor->PortPowerCtrlMask[i];
381
382 dev->maxchild = descriptor->bNbrPorts;
383 debug("%d ports detected\n", dev->maxchild);
384
385 hubCharacteristics = get_unaligned(&hub->desc.wHubCharacteristics);
386 switch (hubCharacteristics & HUB_CHAR_LPSM) {
387 case 0x00:
388 debug("ganged power switching\n");
389 break;
390 case 0x01:
391 debug("individual port power switching\n");
392 break;
393 case 0x02:
394 case 0x03:
395 debug("unknown reserved power switching mode\n");
396 break;
397 }
398
399 if (hubCharacteristics & HUB_CHAR_COMPOUND)
400 debug("part of a compound device\n");
401 else
402 debug("standalone hub\n");
403
404 switch (hubCharacteristics & HUB_CHAR_OCPM) {
405 case 0x00:
406 debug("global over-current protection\n");
407 break;
408 case 0x08:
409 debug("individual port over-current protection\n");
410 break;
411 case 0x10:
412 case 0x18:
413 debug("no over-current protection\n");
414 break;
415 }
416
417 debug("power on to power good time: %dms\n",
418 descriptor->bPwrOn2PwrGood * 2);
419 debug("hub controller current requirement: %dmA\n",
420 descriptor->bHubContrCurrent);
421
422 for (i = 0; i < dev->maxchild; i++)
423 debug("port %d is%s removable\n", i + 1,
424 hub->desc.DeviceRemovable[(i + 1) / 8] & \
425 (1 << ((i + 1) % 8)) ? " not" : "");
426
427 if (sizeof(struct usb_hub_status) > USB_BUFSIZ) {
428 debug("usb_hub_configure: failed to get Status - " \
429 "too long: %d\n", descriptor->bLength);
430 return -EFBIG;
431 }
432
433 ret = usb_get_hub_status(dev, buffer);
434 if (ret < 0) {
435 debug("usb_hub_configure: failed to get Status %lX\n",
436 dev->status);
437 return ret;
438 }
439
440 #ifdef DEBUG
441 hubsts = (struct usb_hub_status *)buffer;
442 #endif
443
444 debug("get_hub_status returned status %X, change %X\n",
445 le16_to_cpu(hubsts->wHubStatus),
446 le16_to_cpu(hubsts->wHubChange));
447 debug("local power source is %s\n",
448 (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \
449 "lost (inactive)" : "good");
450 debug("%sover-current condition exists\n",
451 (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \
452 "" : "no ");
453 usb_hub_power_on(hub);
454
455 /*
456 * Reset any devices that may be in a bad state when applying
457 * the power. This is a __weak function. Resetting of the devices
458 * should occur in the board file of the device.
459 */
460 for (i = 0; i < dev->maxchild; i++)
461 usb_hub_reset_devices(i + 1);
462
463 for (i = 0; i < dev->maxchild; i++) {
464 ALLOC_CACHE_ALIGN_BUFFER(struct usb_port_status, portsts, 1);
465 unsigned short portstatus, portchange;
466 int ret;
467 ulong start = get_timer(0);
468
469 #ifdef CONFIG_DM_USB
470 debug("\n\nScanning '%s' port %d\n", dev->dev->name, i + 1);
471 #else
472 debug("\n\nScanning port %d\n", i + 1);
473 #endif
474 /*
475 * Wait for (whichever finishes first)
476 * - A maximum of 10 seconds
477 * This is a purely observational value driven by connecting
478 * a few broken pen drives and taking the max * 1.5 approach
479 * - connection_change and connection state to report same
480 * state
481 */
482 do {
483 ret = usb_get_port_status(dev, i + 1, portsts);
484 if (ret < 0) {
485 debug("get_port_status failed\n");
486 break;
487 }
488
489 portstatus = le16_to_cpu(portsts->wPortStatus);
490 portchange = le16_to_cpu(portsts->wPortChange);
491
492 if ((portchange & USB_PORT_STAT_C_CONNECTION) ==
493 (portstatus & USB_PORT_STAT_CONNECTION))
494 break;
495
496 } while (get_timer(start) < CONFIG_SYS_HZ * 10);
497
498 if (ret < 0)
499 continue;
500
501 debug("Port %d Status %X Change %X\n",
502 i + 1, portstatus, portchange);
503
504 if (portchange & USB_PORT_STAT_C_CONNECTION) {
505 debug("port %d connection change\n", i + 1);
506 usb_hub_port_connect_change(dev, i);
507 }
508 if (portchange & USB_PORT_STAT_C_ENABLE) {
509 debug("port %d enable change, status %x\n",
510 i + 1, portstatus);
511 usb_clear_port_feature(dev, i + 1,
512 USB_PORT_FEAT_C_ENABLE);
513 /*
514 * The following hack causes a ghost device problem
515 * to Faraday EHCI
516 */
517 #ifndef CONFIG_USB_EHCI_FARADAY
518 /* EM interference sometimes causes bad shielded USB
519 * devices to be shutdown by the hub, this hack enables
520 * them again. Works at least with mouse driver */
521 if (!(portstatus & USB_PORT_STAT_ENABLE) &&
522 (portstatus & USB_PORT_STAT_CONNECTION) &&
523 usb_device_has_child_on_port(dev, i)) {
524 debug("already running port %i " \
525 "disabled by hub (EMI?), " \
526 "re-enabling...\n", i + 1);
527 usb_hub_port_connect_change(dev, i);
528 }
529 #endif
530 }
531 if (portstatus & USB_PORT_STAT_SUSPEND) {
532 debug("port %d suspend change\n", i + 1);
533 usb_clear_port_feature(dev, i + 1,
534 USB_PORT_FEAT_SUSPEND);
535 }
536
537 if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
538 debug("port %d over-current change\n", i + 1);
539 usb_clear_port_feature(dev, i + 1,
540 USB_PORT_FEAT_C_OVER_CURRENT);
541 usb_hub_power_on(hub);
542 }
543
544 if (portchange & USB_PORT_STAT_C_RESET) {
545 debug("port %d reset change\n", i + 1);
546 usb_clear_port_feature(dev, i + 1,
547 USB_PORT_FEAT_C_RESET);
548 }
549 } /* end for i all ports */
550
551 return 0;
552 }
553
usb_hub_check(struct usb_device * dev,int ifnum)554 static int usb_hub_check(struct usb_device *dev, int ifnum)
555 {
556 struct usb_interface *iface;
557 struct usb_endpoint_descriptor *ep = NULL;
558
559 iface = &dev->config.if_desc[ifnum];
560 /* Is it a hub? */
561 if (iface->desc.bInterfaceClass != USB_CLASS_HUB)
562 goto err;
563 /* Some hubs have a subclass of 1, which AFAICT according to the */
564 /* specs is not defined, but it works */
565 if ((iface->desc.bInterfaceSubClass != 0) &&
566 (iface->desc.bInterfaceSubClass != 1))
567 goto err;
568 /* Multiple endpoints? What kind of mutant ninja-hub is this? */
569 if (iface->desc.bNumEndpoints != 1)
570 goto err;
571 ep = &iface->ep_desc[0];
572 /* Output endpoint? Curiousier and curiousier.. */
573 if (!(ep->bEndpointAddress & USB_DIR_IN))
574 goto err;
575 /* If it's not an interrupt endpoint, we'd better punt! */
576 if ((ep->bmAttributes & 3) != 3)
577 goto err;
578 /* We found a hub */
579 debug("USB hub found\n");
580 return 0;
581
582 err:
583 debug("USB hub not found: bInterfaceClass=%d, bInterfaceSubClass=%d, bNumEndpoints=%d\n",
584 iface->desc.bInterfaceClass, iface->desc.bInterfaceSubClass,
585 iface->desc.bNumEndpoints);
586 if (ep) {
587 debug(" bEndpointAddress=%#x, bmAttributes=%d",
588 ep->bEndpointAddress, ep->bmAttributes);
589 }
590
591 return -ENOENT;
592 }
593
usb_hub_probe(struct usb_device * dev,int ifnum)594 int usb_hub_probe(struct usb_device *dev, int ifnum)
595 {
596 int ret;
597
598 ret = usb_hub_check(dev, ifnum);
599 if (ret)
600 return 0;
601 ret = usb_hub_configure(dev);
602 return ret;
603 }
604
605 #ifdef CONFIG_DM_USB
usb_hub_scan(struct udevice * hub)606 int usb_hub_scan(struct udevice *hub)
607 {
608 struct usb_device *udev = dev_get_parentdata(hub);
609
610 return usb_hub_configure(udev);
611 }
612
usb_hub_post_bind(struct udevice * dev)613 static int usb_hub_post_bind(struct udevice *dev)
614 {
615 /* Scan the bus for devices */
616 return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
617 }
618
usb_hub_post_probe(struct udevice * dev)619 static int usb_hub_post_probe(struct udevice *dev)
620 {
621 debug("%s\n", __func__);
622 return usb_hub_scan(dev);
623 }
624
625 static const struct udevice_id usb_hub_ids[] = {
626 { .compatible = "usb-hub" },
627 { }
628 };
629
630 U_BOOT_DRIVER(usb_generic_hub) = {
631 .name = "usb_hub",
632 .id = UCLASS_USB_HUB,
633 .of_match = usb_hub_ids,
634 .flags = DM_FLAG_ALLOC_PRIV_DMA,
635 };
636
637 UCLASS_DRIVER(usb_hub) = {
638 .id = UCLASS_USB_HUB,
639 .name = "usb_hub",
640 .post_bind = usb_hub_post_bind,
641 .post_probe = usb_hub_post_probe,
642 .child_pre_probe = usb_child_pre_probe,
643 .per_child_auto_alloc_size = sizeof(struct usb_device),
644 .per_child_platdata_auto_alloc_size = sizeof(struct usb_dev_platdata),
645 };
646
647 static const struct usb_device_id hub_id_table[] = {
648 {
649 .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
650 .bDeviceClass = USB_CLASS_HUB
651 },
652 { } /* Terminating entry */
653 };
654
655 USB_DEVICE(usb_generic_hub, hub_id_table);
656
657 #endif
658