1 /* 2 * U-boot - Configuration file for Bluetechnix TCM-BF518 board 3 */ 4 5 #ifndef __CONFIG_TCM_BF518_H__ 6 #define __CONFIG_TCM_BF518_H__ 7 8 #include <asm/config-pre.h> 9 10 11 /* 12 * Processor Settings 13 */ 14 #define CONFIG_BFIN_CPU bf518-0.0 15 #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA 16 17 18 /* 19 * Clock Settings 20 * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV 21 * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV 22 */ 23 /* CONFIG_CLKIN_HZ is any value in Hz */ 24 #define CONFIG_CLKIN_HZ 25000000 25 /* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ 26 /* 1 = CLKIN / 2 */ 27 #define CONFIG_CLKIN_HALF 0 28 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ 29 /* 1 = bypass PLL */ 30 #define CONFIG_PLL_BYPASS 0 31 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ 32 /* Values can range from 0-63 (where 0 means 64) */ 33 #define CONFIG_VCO_MULT 16 34 /* CCLK_DIV controls the core clock divider */ 35 /* Values can be 1, 2, 4, or 8 ONLY */ 36 #define CONFIG_CCLK_DIV 1 37 /* SCLK_DIV controls the system clock divider */ 38 /* Values can range from 1-15 */ 39 #define CONFIG_SCLK_DIV 4 40 41 42 /* 43 * Memory Settings 44 */ 45 /* This board has a 32meg MT48H16M16 */ 46 #define CONFIG_MEM_ADD_WDTH 9 47 #define CONFIG_MEM_SIZE 32 48 49 #define CONFIG_EBIU_SDRRC_VAL 0x3f8 50 #define CONFIG_EBIU_SDGCTL_VAL 0x9111cd 51 52 #define CONFIG_EBIU_AMGCTL_VAL (AMBEN_ALL) 53 #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3) 54 #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3) 55 56 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 57 #define CONFIG_SYS_MALLOC_LEN (384 * 1024) 58 59 60 /* 61 * Network Settings 62 */ 63 #if !defined(__ADSPBF512__) && !defined(__ADSPBF514__) 64 #define ADI_CMDS_NETWORK 1 65 #define CONFIG_BFIN_MAC 66 #define CONFIG_NETCONSOLE 1 67 #endif 68 #define CONFIG_HOSTNAME tcm-bf518 69 70 /* 71 * Flash Settings 72 */ 73 #define CONFIG_FLASH_CFI_DRIVER 74 #define CONFIG_SYS_FLASH_BASE 0x20000000 75 #define CONFIG_SYS_FLASH_CFI 76 #define CONFIG_SYS_FLASH_PROTECTION 77 #define CONFIG_SYS_MAX_FLASH_BANKS 1 78 #define CONFIG_SYS_MAX_FLASH_SECT 19 79 80 81 /* 82 * SPI Settings 83 */ 84 #define CONFIG_BFIN_SPI 85 #define CONFIG_ENV_SPI_MAX_HZ 30000000 86 #define CONFIG_SF_DEFAULT_SPEED 30000000 87 88 89 /* 90 * Env Storage Settings 91 */ 92 #define CONFIG_ENV_IS_IN_FLASH 93 #define CONFIG_ENV_OFFSET 0x8000 94 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) 95 #define CONFIG_ENV_SIZE 0x2000 96 #define CONFIG_ENV_SECT_SIZE 0x8000 97 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR 98 99 100 /* 101 * I2C Settings 102 */ 103 #define CONFIG_SYS_I2C 104 #define CONFIG_SYS_I2C_ADI 105 106 107 /* 108 * Misc Settings 109 */ 110 #define CONFIG_BAUDRATE 115200 111 #define CONFIG_RTC_BFIN 112 #define CONFIG_UART_CONSOLE 0 113 #define CONFIG_BOOTCOMMAND "run flashboot" 114 #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" 115 116 /* 117 * Pull in common ADI header for remaining command/environment setup 118 */ 119 #include <configs/bfin_adi_common.h> 120 121 #endif 122