1 /* 2 * (C) Copyright 2009 DENX Software Engineering 3 * Author: John Rigby <jrigby@gmail.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __CONFIG_H 9 #define __CONFIG_H 10 11 #include <asm/arch/imx-regs.h> 12 13 /* 14 * KARO TX25 board - SoC Configuration 15 */ 16 #define CONFIG_MX25 17 #define CONFIG_MX25_CLK32 32000 /* OSC32K frequency */ 18 #define CONFIG_SYS_TIMER_RATE CONFIG_MX25_CLK32 19 #define CONFIG_SYS_TIMER_COUNTER \ 20 (&((struct gpt_regs *)IMX_GPT1_BASE)->counter) 21 22 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 kB for U-Boot */ 23 24 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 25 #define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds" 26 #define CONFIG_SPL_MAX_SIZE 2048 27 #define CONFIG_SPL_NAND_SUPPORT 28 #define CONFIG_SPL_LIBGENERIC_SUPPORT 29 30 #define CONFIG_SPL_TEXT_BASE 0x810c0000 31 #define CONFIG_SYS_TEXT_BASE 0x81200000 32 33 #ifndef MACH_TYPE_TX25 34 #define MACH_TYPE_TX25 2177 35 #endif 36 37 #define CONFIG_MACH_TYPE MACH_TYPE_TX25 38 39 #ifdef CONFIG_SPL_BUILD 40 /* Start copying real U-boot from the second page */ 41 #define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO 42 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x30000 43 44 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 45 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST 46 47 #define CONFIG_SYS_NAND_PAGE_SIZE 2048 48 #define CONFIG_SYS_NAND_OOBSIZE 64 49 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 50 #define CONFIG_SYS_NAND_PAGE_COUNT 64 51 #define CONFIG_SYS_NAND_SIZE (128 * 1024 * 1024) 52 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 53 #else 54 #define CONFIG_SKIP_LOWLEVEL_INIT 55 #endif 56 57 #define CONFIG_DISPLAY_CPUINFO 58 59 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 60 #define CONFIG_SETUP_MEMORY_TAGS 61 #define CONFIG_INITRD_TAG 62 63 /* 64 * Memory Info 65 */ 66 /* malloc() len */ 67 #define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */ 68 /* 69 * Board has 2 32MB banks of DRAM but there is a bug when using 70 * both so only the first is configured 71 */ 72 #define CONFIG_NR_DRAM_BANKS 1 73 74 #define PHYS_SDRAM_1 0x80000000 75 #define PHYS_SDRAM_1_SIZE 0x02000000 76 #if (CONFIG_NR_DRAM_BANKS == 2) 77 #define PHYS_SDRAM_2 0x90000000 78 #define PHYS_SDRAM_2_SIZE 0x02000000 79 #endif 80 /* 8MB DRAM test */ 81 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 82 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1+0x0800000) 83 84 /* 85 * Serial Info 86 */ 87 #define CONFIG_MXC_UART 88 #define CONFIG_MXC_UART_BASE UART1_BASE 89 #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ 90 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ 91 92 #define CONFIG_MXC_GPIO 93 94 /* 95 * Flash & Environment 96 */ 97 /* No NOR flash present */ 98 #define CONFIG_SYS_NO_FLASH 99 #define CONFIG_ENV_IS_IN_NAND 100 #define CONFIG_ENV_OFFSET CONFIG_SYS_MONITOR_LEN 101 #define CONFIG_ENV_SIZE (128 * 1024) /* 128 kB NAND block size */ 102 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) 103 104 /* NAND */ 105 #define CONFIG_NAND_MXC 106 #define CONFIG_MXC_NAND_REGS_BASE (0xBB000000) 107 #define CONFIG_SYS_MAX_NAND_DEVICE 1 108 #define CONFIG_SYS_NAND_BASE (0xBB000000) 109 #define CONFIG_JFFS2_NAND 110 #define CONFIG_MXC_NAND_HWECC 111 #define CONFIG_SYS_NAND_LARGEPAGE 112 113 /* U-Boot general configuration */ 114 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 115 /* Print buffer sz */ 116 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 117 sizeof(CONFIG_SYS_PROMPT) + 16) 118 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 119 /* Boot Argument Buffer Size */ 120 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 121 #define CONFIG_CMDLINE_EDITING 122 #define CONFIG_SYS_LONGHELP 123 124 /* U-Boot commands */ 125 #define CONFIG_CMD_NAND 126 #define CONFIG_CMD_CACHE 127 128 /* 129 * Ethernet 130 */ 131 #define CONFIG_FEC_MXC 132 #define CONFIG_FEC_MXC_PHYADDR 0x1f 133 #define CONFIG_MII 134 #define CONFIG_BOARD_LATE_INIT 135 #define CONFIG_ENV_OVERWRITE 136 137 #define CONFIG_BOOTDELAY 5 138 139 #define CONFIG_LOADADDR 0x81000000 /* loadaddr env var */ 140 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 141 142 #define CONFIG_EXTRA_ENV_SETTINGS \ 143 "netdev=eth0\0" \ 144 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 145 "nfsroot=${serverip}:${rootpath}\0" \ 146 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 147 "addip=setenv bootargs ${bootargs} " \ 148 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 149 ":${hostname}:${netdev}:off panic=1\0" \ 150 "addtty=setenv bootargs ${bootargs}" \ 151 " console=ttymxc0,${baudrate}\0" \ 152 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 153 "addmisc=setenv bootargs ${bootargs}\0" \ 154 "u-boot=tx25/u-boot.bin\0" \ 155 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ 156 "hostname=tx25\0" \ 157 "bootfile=tx25/uImage\0" \ 158 "rootpath=/opt/eldk/arm\0" \ 159 "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ 160 "run nfsargs addip addtty addmtd addmisc;" \ 161 "bootm\0" \ 162 "bootcmd=run net_nfs\0" \ 163 "load=tftp ${loadaddr} ${u-boot}\0" \ 164 "update=nand erase 0 40000;nand write ${loadaddr} 0 40000\0" \ 165 "upd=run load update\0" \ 166 167 /* additions for new relocation code, must be added to all boards */ 168 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 169 #define CONFIG_SYS_INIT_SP_ADDR (IMX_RAM_BASE + IMX_RAM_SIZE) 170 171 #endif /* __CONFIG_H */ 172