1# When testing changes, the easiest way to reload the theme is with /RELOAD. 2# This reloads the configuration file too, so if you did any changes remember 3# to /SAVE it first. Remember also that /SAVE overwrites the theme file with 4# old data so keep backups :) 5 6# TEMPLATES: 7 8# The real text formats that irssi uses are the ones you can find with 9# /FORMAT command. Back in the old days all the colors and texts were mixed 10# up in those formats, and it was really hard to change the colors since you 11# might have had to change them in tens of different places. So, then came 12# this templating system. 13 14# Now the /FORMATs don't have any colors in them, and they also have very 15# little other styling. Most of the stuff you need to change is in this 16# theme file. If you can't change something here, you can always go back 17# to change the /FORMATs directly, they're also saved in these .theme files. 18 19# So .. the templates. They're those {blahblah} parts you see all over the 20# /FORMATs and here. Their usage is simply {name parameter1 parameter2}. 21# When irssi sees this kind of text, it goes to find "name" from abstracts 22# block below and sets "parameter1" into $0 and "parameter2" into $1 (you 23# can have more parameters of course). Templates can have subtemplates. 24# Here's a small example: 25# /FORMAT format hello {colorify {underline world}} 26# abstracts = { colorify = "%G$0-%n"; underline = "%U$0-%U"; } 27# When irssi expands the templates in "format", the final string would be: 28# hello %G%Uworld%U%n 29# ie. underlined bright green "world" text. 30# and why "$0-", why not "$0"? $0 would only mean the first parameter, 31# $0- means all the parameters. With {underline hello world} you'd really 32# want to underline both of the words, not just the hello (and world would 33# actually be removed entirely). 34 35# COLORS: 36 37# You can find definitions for the color format codes in docs/formats.txt. 38 39# There's one difference here though. %n format. Normally it means the 40# default color of the terminal (white mostly), but here it means the 41# "reset color back to the one it was in higher template". For example 42# if there was /FORMAT test %g{foo}bar, and foo = "%Y$0%n", irssi would 43# print yellow "foo" (as set with %Y) but "bar" would be green, which was 44# set at the beginning before the {foo} template. If there wasn't the %g 45# at start, the normal behaviour of %n would occur. If you _really_ want 46# to use the terminal's default color, use %N. 47 48############################################################################# 49 50# these characters are automatically replaced with specified color 51# (dark grey by default) 52replaces = { "[]=" = "%g$0-%n"; "<>" = "%Y$0-%n"; }; 53 54abstracts = { 55 ## 56 ## generic 57 ## 58 59 # text to insert at the beginning of each non-message line 60 line_start = "%G*%g*%w*%n "; 61 62 # timestamp styling, nothing by default 63 timestamp = "[%w$0%n]"; 64 65 # any kind of text that needs hilighting, default is to bold 66 hilight = "%_$0-%_"; 67 68 # any kind of error message, default is bright red 69 error = "%R$0-%n"; 70 71 # channel name is printed 72 channel = "<%C$0->"; 73 74 # nick is printed 75 nick = "%_$0-%_"; 76 77 # nick host is printed 78 nickhost = "[%w$0-%n]"; 79 80 # server name is printed 81 server = "%_$0-%_"; 82 83 # some kind of comment is printed 84 comment = "[$0-]"; 85 86 # reason for something is printed (part, quit, kick, ..) 87 reason = "{comment $0-}"; 88 89 # mode change is printed ([+o nick]) 90 mode = "{comment $0-}"; 91 92 ## 93 ## channel specific messages 94 ## 95 96 # highlighted nick/host is printed (joins) 97 channick_hilight = "%C$0-%n"; 98 chanhost_hilight = "{nickhost $0-}"; 99 100 # nick/host is printed (parts, quits, etc.) 101 channick = "%c$0-%n"; 102 chanhost = "{nickhost $0-}"; 103 104 # highlighted channel name is printed 105 channelhilight = "%c$0-%n"; 106 107 # ban/ban exception/invite list mask is printed 108 ban = "%c$0-%n"; 109 110 ## 111 ## messages 112 ## 113 114 # the basic styling of how to print message, $0 = nick mode, $1 = nick 115 msgnick = "<$0$1-> %|"; 116 117 # message from you is printed. "msgownnick" specifies the styling of the 118 # nick ($0 part in msgnick) and "ownmsgnick" specifies the styling of the 119 # whole line. 120 121 # Example1: You want the message text to be green: 122 # ownmsgnick = "{msgnick $0 $1-}%g"; 123 # Example2.1: You want < and > chars to be yellow: 124 # ownmsgnick = "%Y{msgnick $0 $1-%Y}%n"; 125 # (you'll also have to remove <> from replaces list above) 126 # Example2.2: But you still want to keep <> grey for other messages: 127 # pubmsgnick = "%K{msgnick $0 $1-%K}%n"; 128 # pubmsgmenick = "%K{msgnick $0 $1-%K}%n"; 129 # pubmsghinick = "%K{msgnick $1 $0$2-%K}%n"; 130 # ownprivmsgnick = "%K{msgnick $0-%K}%n"; 131 # privmsgnick = "%K{msgnick %R$0-%K}%n"; 132 133 # $0 = nick mode, $1 = nick 134 ownmsgnick = "{msgnick $0 $1-}"; 135 ownnick = "%W%U$0-%n"; 136 137 # public message in channel, $0 = nick mode, $1 = nick 138 pubmsgnick = "{msgnick $0 $1-}"; 139 pubnick = "%N$0-%n"; 140 141 # public message in channel meant for me, $0 = nick mode, $1 = nick 142 pubmsgmenick = "{msgnick $0 $1-}"; 143 menick = "%Y$0-%n"; 144 145 # public highlighted message in channel 146 # $0 = highlight color, $1 = nick mode, $2 = nick 147 pubmsghinick = "{msgnick $1 $0$2-}"; 148 149 # channel name is printed with message 150 msgchannel = "%K:%c$0-%n"; 151 152 # private message, $0 = nick, $1 = host 153 privmsg = "[%R$0%w(%c$1-%w)%n] "; 154 155 # private message from you, $0 = "msg", $1 = target nick 156 ownprivmsg = "[%r$0%K(%R$1-%K)%n] "; 157 158 # own private message in query 159 ownprivmsgnick = "{msgnick $0-}"; 160 ownprivnick = "%W$0-%n"; 161 162 # private message in query 163 privmsgnick = "{msgnick %R$0-%n}"; 164 165 ## 166 ## Actions (/ME stuff) 167 ## 168 169 # used internally by this theme 170 action_core = "%W * $0-%n"; 171 172 # generic one that's used by most actions 173 action = "{action_core $0-} "; 174 175 # own action, both private/public 176 ownaction = "{action $0-}"; 177 178 # own action with target, both private/public 179 ownaction_target = "{action_core $0}%K:%c$1%n "; 180 181 # private action sent by others 182 pvtaction = "%W (*) $0-%n "; 183 pvtaction_query = "{action $0-}"; 184 185 # public action sent by others 186 pubaction = "{action $0-}"; 187 188 189 ## 190 ## other IRC events 191 ## 192 193 # notices 194 ownnotice = "[%r$0%K(%R$1-%K)]%n "; 195 notice = "%K-%M$0-%K-%n "; 196 pubnotice_channel = "%K:%m$0-"; 197 pvtnotice_host = "%K(%c$0-%K)"; 198 servernotice = "%g!$0-%n "; 199 200 # CTCPs 201 ownctcp = "[%r$0%K(%R$1-%K)] "; 202 ctcp = "%g$0-%n"; 203 204 # wallops 205 wallop = "%W$0-%n: "; 206 wallop_nick = "%n$0-"; 207 wallop_action = "%W * $0-%n "; 208 209 # netsplits 210 netsplit = "%R$0-%n"; 211 netjoin = "%C$0-%n"; 212 213 # /names list 214 names_nick = "[%_$0%_$1-] "; 215 names_users = "[%g$0-%n]"; 216 names_channel = "%G$0-%n"; 217 218 # DCC 219 dcc = "%g$0-%n"; 220 dccfile = "%_$0-%_"; 221 222 # DCC chat, own msg/action 223 dccownmsg = "[%r$0%K($1-%K)%n] "; 224 dccownnick = "%R$0-%n"; 225 dccownaction = "{action $0-}"; 226 dccownaction_target = "{action_core $0}%K:%c$1%n "; 227 228 # DCC chat, others 229 dccmsg = "[%G$1-%K(%g$0%K)%n] "; 230 dccquerynick = "%G$0-%n"; 231 dccaction = "%W (*dcc*) $0-%n %|"; 232}; 233