1# Makefile.in generated by automake 1.15 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2014 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# 18# Copyright 2005 Red Hat, Inc. 19# 20# Permission to use, copy, modify, distribute, and sell this software and its 21# documentation for any purpose is hereby granted without fee, provided that 22# the above copyright notice appear in all copies and that both that 23# copyright notice and this permission notice appear in supporting 24# documentation, and that the name of Red Hat not be used in 25# advertising or publicity pertaining to distribution of the software without 26# specific, written prior permission. Red Hat makes no 27# representations about the suitability of this software for any purpose. It 28# is provided "as is" without express or implied warranty. 29# 30# RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, 31# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO 32# EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR 33# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, 34# DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER 35# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR 36# PERFORMANCE OF THIS SOFTWARE. 37 38VPATH = @srcdir@ 39am__is_gnu_make = { \ 40 if test -z '$(MAKELEVEL)'; then \ 41 false; \ 42 elif test -n '$(MAKE_HOST)'; then \ 43 true; \ 44 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 45 true; \ 46 else \ 47 false; \ 48 fi; \ 49} 50am__make_running_with_option = \ 51 case $${target_option-} in \ 52 ?) ;; \ 53 *) echo "am__make_running_with_option: internal error: invalid" \ 54 "target option '$${target_option-}' specified" >&2; \ 55 exit 1;; \ 56 esac; \ 57 has_opt=no; \ 58 sane_makeflags=$$MAKEFLAGS; \ 59 if $(am__is_gnu_make); then \ 60 sane_makeflags=$$MFLAGS; \ 61 else \ 62 case $$MAKEFLAGS in \ 63 *\\[\ \ ]*) \ 64 bs=\\; \ 65 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 66 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 67 esac; \ 68 fi; \ 69 skip_next=no; \ 70 strip_trailopt () \ 71 { \ 72 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 73 }; \ 74 for flg in $$sane_makeflags; do \ 75 test $$skip_next = yes && { skip_next=no; continue; }; \ 76 case $$flg in \ 77 *=*|--*) continue;; \ 78 -*I) strip_trailopt 'I'; skip_next=yes;; \ 79 -*I?*) strip_trailopt 'I';; \ 80 -*O) strip_trailopt 'O'; skip_next=yes;; \ 81 -*O?*) strip_trailopt 'O';; \ 82 -*l) strip_trailopt 'l'; skip_next=yes;; \ 83 -*l?*) strip_trailopt 'l';; \ 84 -[dEDm]) skip_next=yes;; \ 85 -[JT]) skip_next=yes;; \ 86 esac; \ 87 case $$flg in \ 88 *$$target_option*) has_opt=yes; break;; \ 89 esac; \ 90 done; \ 91 test $$has_opt = yes 92am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 93am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 94pkgdatadir = $(datadir)/@PACKAGE@ 95pkgincludedir = $(includedir)/@PACKAGE@ 96pkglibdir = $(libdir)/@PACKAGE@ 97pkglibexecdir = $(libexecdir)/@PACKAGE@ 98am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 99install_sh_DATA = $(install_sh) -c -m 644 100install_sh_PROGRAM = $(install_sh) -c 101install_sh_SCRIPT = $(install_sh) -c 102INSTALL_HEADER = $(INSTALL_DATA) 103transform = $(program_transform_name) 104NORMAL_INSTALL = : 105PRE_INSTALL = : 106POST_INSTALL = : 107NORMAL_UNINSTALL = : 108PRE_UNINSTALL = : 109POST_UNINSTALL = : 110build_triplet = @build@ 111host_triplet = @host@ 112subdir = . 113ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 114am__aclocal_m4_deps = $(top_srcdir)/m4/ax_define_dir.m4 \ 115 $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ 116 $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ 117 $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac 118am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 119 $(ACLOCAL_M4) 120DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 121 $(am__configure_deps) $(am__DIST_COMMON) 122am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 123 configure.lineno config.status.lineno 124mkinstalldirs = $(install_sh) -d 125CONFIG_HEADER = config.h 126CONFIG_CLEAN_FILES = 127CONFIG_CLEAN_VPATH_FILES = 128AM_V_P = $(am__v_P_@AM_V@) 129am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 130am__v_P_0 = false 131am__v_P_1 = : 132AM_V_GEN = $(am__v_GEN_@AM_V@) 133am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 134am__v_GEN_0 = @echo " GEN " $@; 135am__v_GEN_1 = 136AM_V_at = $(am__v_at_@AM_V@) 137am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 138am__v_at_0 = @ 139am__v_at_1 = 140SOURCES = 141DIST_SOURCES = 142RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 143 ctags-recursive dvi-recursive html-recursive info-recursive \ 144 install-data-recursive install-dvi-recursive \ 145 install-exec-recursive install-html-recursive \ 146 install-info-recursive install-pdf-recursive \ 147 install-ps-recursive install-recursive installcheck-recursive \ 148 installdirs-recursive pdf-recursive ps-recursive \ 149 tags-recursive uninstall-recursive 150am__can_run_installinfo = \ 151 case $$AM_UPDATE_INFO_DIR in \ 152 n|no|NO) false;; \ 153 *) (install-info --version) >/dev/null 2>&1;; \ 154 esac 155am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 156am__vpath_adj = case $$p in \ 157 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 158 *) f=$$p;; \ 159 esac; 160am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 161am__install_max = 40 162am__nobase_strip_setup = \ 163 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 164am__nobase_strip = \ 165 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 166am__nobase_list = $(am__nobase_strip_setup); \ 167 for p in $$list; do echo "$$p $$p"; done | \ 168 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 169 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 170 if (++n[$$2] == $(am__install_max)) \ 171 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 172 END { for (dir in files) print dir, files[dir] }' 173am__base_list = \ 174 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 175 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 176am__uninstall_files_from_dir = { \ 177 test -z "$$files" \ 178 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 179 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 180 $(am__cd) "$$dir" && rm -f $$files; }; \ 181 } 182am__installdirs = "$(DESTDIR)$(systemdsystemunitdir)" 183DATA = $(systemdsystemunit_DATA) 184RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 185 distclean-recursive maintainer-clean-recursive 186am__recursive_targets = \ 187 $(RECURSIVE_TARGETS) \ 188 $(RECURSIVE_CLEAN_TARGETS) \ 189 $(am__extra_recursive_targets) 190AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 191 cscope distdir dist dist-all distcheck 192am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ 193 $(LISP)config.h.in 194# Read a list of newline-separated strings from the standard input, 195# and print each of them once, without duplicates. Input order is 196# *not* preserved. 197am__uniquify_input = $(AWK) '\ 198 BEGIN { nonempty = 0; } \ 199 { items[$$0] = 1; nonempty = 1; } \ 200 END { if (nonempty) { for (i in items) print i; }; } \ 201' 202# Make sure the list of sources is unique. This is necessary because, 203# e.g., the same source file might be shared among _SOURCES variables 204# for different programs/libraries. 205am__define_uniq_tagged_files = \ 206 list='$(am__tagged_files)'; \ 207 unique=`for i in $$list; do \ 208 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 209 done | $(am__uniquify_input)` 210ETAGS = etags 211CTAGS = ctags 212CSCOPE = cscope 213DIST_SUBDIRS = $(SUBDIRS) 214am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in AUTHORS \ 215 COPYING ChangeLog INSTALL compile config.guess config.sub \ 216 install-sh ltmain.sh missing 217DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 218distdir = $(PACKAGE)-$(VERSION) 219top_distdir = $(distdir) 220am__remove_distdir = \ 221 if test -d "$(distdir)"; then \ 222 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 223 && rm -rf "$(distdir)" \ 224 || { sleep 5 && rm -rf "$(distdir)"; }; \ 225 else :; fi 226am__post_remove_distdir = $(am__remove_distdir) 227am__relativize = \ 228 dir0=`pwd`; \ 229 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 230 sed_rest='s,^[^/]*/*,,'; \ 231 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 232 sed_butlast='s,/*[^/]*$$,,'; \ 233 while test -n "$$dir1"; do \ 234 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 235 if test "$$first" != "."; then \ 236 if test "$$first" = ".."; then \ 237 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 238 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 239 else \ 240 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 241 if test "$$first2" = "$$first"; then \ 242 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 243 else \ 244 dir2="../$$dir2"; \ 245 fi; \ 246 dir0="$$dir0"/"$$first"; \ 247 fi; \ 248 fi; \ 249 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 250 done; \ 251 reldir="$$dir2" 252DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 253GZIP_ENV = --best 254DIST_TARGETS = dist-bzip2 dist-gzip 255distuninstallcheck_listfiles = find . -type f -print 256am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 257 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 258distcleancheck_listfiles = find . -type f -print 259ACLOCAL = @ACLOCAL@ 260ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ 261ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ 262AMTAR = @AMTAR@ 263AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 264APPDEFS_CFLAGS = @APPDEFS_CFLAGS@ 265APPDEFS_LIBS = @APPDEFS_LIBS@ 266APP_MAN_DIR = @APP_MAN_DIR@ 267APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ 268AR = @AR@ 269AUTH_CFLAGS = @AUTH_CFLAGS@ 270AUTH_LIBS = @AUTH_LIBS@ 271AUTOCONF = @AUTOCONF@ 272AUTOHEADER = @AUTOHEADER@ 273AUTOMAKE = @AUTOMAKE@ 274AWK = @AWK@ 275BASE_CFLAGS = @BASE_CFLAGS@ 276CC = @CC@ 277CCDEPMODE = @CCDEPMODE@ 278CFLAGS = @CFLAGS@ 279CHANGELOG_CMD = @CHANGELOG_CMD@ 280CHOOSER_CFLAGS = @CHOOSER_CFLAGS@ 281CHOOSER_LIBS = @CHOOSER_LIBS@ 282CPP = @CPP@ 283CPPFLAGS = @CPPFLAGS@ 284CWARNFLAGS = @CWARNFLAGS@ 285CYGPATH_W = @CYGPATH_W@ 286DEFAULTVT = @DEFAULTVT@ 287DEFS = @DEFS@ 288DEF_AUTH_DIR = @DEF_AUTH_DIR@ 289DEF_CHOOSER = @DEF_CHOOSER@ 290DEF_FAILSAFE_CLIENT = @DEF_FAILSAFE_CLIENT@ 291DEF_GREETER_LIB = @DEF_GREETER_LIB@ 292DEF_SERVER_LINE = @DEF_SERVER_LINE@ 293DEF_SESSION = @DEF_SESSION@ 294DEF_SYSTEM_PATH = @DEF_SYSTEM_PATH@ 295DEF_SYSTEM_SHELL = @DEF_SYSTEM_SHELL@ 296DEF_USER_PATH = @DEF_USER_PATH@ 297DEF_XDM_CONFIG = @DEF_XDM_CONFIG@ 298DEPDIR = @DEPDIR@ 299DEV_RANDOM = @DEV_RANDOM@ 300DLLTOOL = @DLLTOOL@ 301DMCP_CFLAGS = @DMCP_CFLAGS@ 302DMCP_LIBS = @DMCP_LIBS@ 303DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ 304DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ 305DSYMUTIL = @DSYMUTIL@ 306DUMPBIN = @DUMPBIN@ 307ECHO_C = @ECHO_C@ 308ECHO_N = @ECHO_N@ 309ECHO_T = @ECHO_T@ 310EGREP = @EGREP@ 311EXEEXT = @EXEEXT@ 312FGREP = @FGREP@ 313FILE_MAN_DIR = @FILE_MAN_DIR@ 314FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ 315GREP = @GREP@ 316HAVE_ARC4RANDOM = @HAVE_ARC4RANDOM@ 317INSTALL = @INSTALL@ 318INSTALL_CMD = @INSTALL_CMD@ 319INSTALL_DATA = @INSTALL_DATA@ 320INSTALL_PROGRAM = @INSTALL_PROGRAM@ 321INSTALL_SCRIPT = @INSTALL_SCRIPT@ 322INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 323LD = @LD@ 324LDFLAGS = @LDFLAGS@ 325LIBOBJS = @LIBOBJS@ 326LIBS = @LIBS@ 327LIBTOOL = @LIBTOOL@ 328LIB_MAN_DIR = @LIB_MAN_DIR@ 329LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ 330LINT = @LINT@ 331LINT_FLAGS = @LINT_FLAGS@ 332LIPO = @LIPO@ 333LN_S = @LN_S@ 334LTLIBOBJS = @LTLIBOBJS@ 335LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 336MAKEINFO = @MAKEINFO@ 337MANIFEST_TOOL = @MANIFEST_TOOL@ 338MAN_SUBSTS = @MAN_SUBSTS@ 339MISC_MAN_DIR = @MISC_MAN_DIR@ 340MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ 341MKDIR_P = @MKDIR_P@ 342MKTEMP_COMMAND = @MKTEMP_COMMAND@ 343NM = @NM@ 344NMEDIT = @NMEDIT@ 345OBJDUMP = @OBJDUMP@ 346OBJEXT = @OBJEXT@ 347OTOOL = @OTOOL@ 348OTOOL64 = @OTOOL64@ 349PACKAGE = @PACKAGE@ 350PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 351PACKAGE_NAME = @PACKAGE_NAME@ 352PACKAGE_STRING = @PACKAGE_STRING@ 353PACKAGE_TARNAME = @PACKAGE_TARNAME@ 354PACKAGE_URL = @PACKAGE_URL@ 355PACKAGE_VERSION = @PACKAGE_VERSION@ 356PATH_SEPARATOR = @PATH_SEPARATOR@ 357PKG_CONFIG = @PKG_CONFIG@ 358PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ 359PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ 360RANLIB = @RANLIB@ 361RAWCPP = @RAWCPP@ 362RAWCPPFLAGS = @RAWCPPFLAGS@ 363SED = @SED@ 364SERVERSTYPE = @SERVERSTYPE@ 365SET_MAKE = @SET_MAKE@ 366SHELL = @SHELL@ 367SHELL_CMD = @SHELL_CMD@ 368STRICT_CFLAGS = @STRICT_CFLAGS@ 369STRIP = @STRIP@ 370SU = @SU@ 371SYSTEMD_DAEMON_CFLAGS = @SYSTEMD_DAEMON_CFLAGS@ 372SYSTEMD_DAEMON_LIBS = @SYSTEMD_DAEMON_LIBS@ 373TRADITIONALCPPFLAGS = @TRADITIONALCPPFLAGS@ 374UTMP_FILE = @UTMP_FILE@ 375VERSION = @VERSION@ 376WTMP_FILE = @WTMP_FILE@ 377XDMCONFIGDIR = @XDMCONFIGDIR@ 378XDMGREET_CFLAGS = @XDMGREET_CFLAGS@ 379XDMGREET_LIBS = @XDMGREET_LIBS@ 380XDMLIBDIR = @XDMLIBDIR@ 381XDMLOGDIR = @XDMLOGDIR@ 382XDMPIDDIR = @XDMPIDDIR@ 383XDMSCRIPTDIR = @XDMSCRIPTDIR@ 384XDMSHELL_CFLAGS = @XDMSHELL_CFLAGS@ 385XDMSHELL_LIBS = @XDMSHELL_LIBS@ 386XDMXAUTHDIR = @XDMXAUTHDIR@ 387XDM_BWPIXMAP = @XDM_BWPIXMAP@ 388XDM_CFLAGS = @XDM_CFLAGS@ 389XDM_LIBS = @XDM_LIBS@ 390XDM_PIXMAP = @XDM_PIXMAP@ 391XDM_PIXMAPDIR = @XDM_PIXMAPDIR@ 392XDM_TOOLKIT_CFLAGS = @XDM_TOOLKIT_CFLAGS@ 393XDM_TOOLKIT_LIBS = @XDM_TOOLKIT_LIBS@ 394XFT_CFLAGS = @XFT_CFLAGS@ 395XFT_LIBS = @XFT_LIBS@ 396XINERAMA_CFLAGS = @XINERAMA_CFLAGS@ 397XINERAMA_LIBS = @XINERAMA_LIBS@ 398XLIB_CFLAGS = @XLIB_CFLAGS@ 399XLIB_LIBS = @XLIB_LIBS@ 400XORG_MAN_PAGE = @XORG_MAN_PAGE@ 401XPM_CFLAGS = @XPM_CFLAGS@ 402XPM_LIBS = @XPM_LIBS@ 403XRDB_PROGRAM = @XRDB_PROGRAM@ 404XT_CFLAGS = @XT_CFLAGS@ 405XT_LIBS = @XT_LIBS@ 406abs_builddir = @abs_builddir@ 407abs_srcdir = @abs_srcdir@ 408abs_top_builddir = @abs_top_builddir@ 409abs_top_srcdir = @abs_top_srcdir@ 410ac_ct_AR = @ac_ct_AR@ 411ac_ct_CC = @ac_ct_CC@ 412ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 413am__include = @am__include@ 414am__leading_dot = @am__leading_dot@ 415am__quote = @am__quote@ 416am__tar = @am__tar@ 417am__untar = @am__untar@ 418appdefaultdir = @appdefaultdir@ 419bindir = @bindir@ 420build = @build@ 421build_alias = @build_alias@ 422build_cpu = @build_cpu@ 423build_os = @build_os@ 424build_vendor = @build_vendor@ 425builddir = @builddir@ 426datadir = @datadir@ 427datarootdir = @datarootdir@ 428docdir = @docdir@ 429dvidir = @dvidir@ 430exec_prefix = @exec_prefix@ 431host = @host@ 432host_alias = @host_alias@ 433host_cpu = @host_cpu@ 434host_os = @host_os@ 435host_vendor = @host_vendor@ 436htmldir = @htmldir@ 437includedir = @includedir@ 438infodir = @infodir@ 439install_sh = @install_sh@ 440libdir = @libdir@ 441libexecdir = @libexecdir@ 442localedir = @localedir@ 443localstatedir = @localstatedir@ 444mandir = @mandir@ 445mkdir_p = @mkdir_p@ 446oldincludedir = @oldincludedir@ 447pdfdir = @pdfdir@ 448prefix = @prefix@ 449program_transform_name = @program_transform_name@ 450psdir = @psdir@ 451sbindir = @sbindir@ 452sharedstatedir = @sharedstatedir@ 453srcdir = @srcdir@ 454sysconfdir = @sysconfdir@ 455systemdsystemunitdir = @systemdsystemunitdir@ 456target_alias = @target_alias@ 457top_build_prefix = @top_build_prefix@ 458top_builddir = @top_builddir@ 459top_srcdir = @top_srcdir@ 460SUBDIRS = app-defaults chooser config greeter include man xdm xdmshell 461ACLOCAL_AMFLAGS = -I m4 462 463# This ensures distcheck is performed in a location where user has write access 464DISTCHECK_CONFIGURE_FLAGS = \ 465 --with-appdefaultdir=\$${datadir}/X11/app-defaults \ 466 --with-systemdsystemunitdir=\$${libdir}/systemd/system 467 468@LINT_TRUE@ALL_LINT_FLAGS = $(LINT_FLAGS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ 469@LINT_TRUE@ $(AM_CPPFLAGS) $(CPPFLAGS) 470 471@HAVE_SYSTEMD_TRUE@systemdsystemunit_DATA = xdm.service 472CLEANFILES = xdm.service 473EXTRA_DIST = xdm.service.in README.md 474MAINTAINERCLEANFILES = ChangeLog INSTALL 475all: config.h 476 $(MAKE) $(AM_MAKEFLAGS) all-recursive 477 478.SUFFIXES: 479am--refresh: Makefile 480 @: 481$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 482 @for dep in $?; do \ 483 case '$(am__configure_deps)' in \ 484 *$$dep*) \ 485 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ 486 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ 487 && exit 0; \ 488 exit 1;; \ 489 esac; \ 490 done; \ 491 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ 492 $(am__cd) $(top_srcdir) && \ 493 $(AUTOMAKE) --foreign Makefile 494Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 495 @case '$?' in \ 496 *config.status*) \ 497 echo ' $(SHELL) ./config.status'; \ 498 $(SHELL) ./config.status;; \ 499 *) \ 500 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 501 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 502 esac; 503 504$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 505 $(SHELL) ./config.status --recheck 506 507$(top_srcdir)/configure: $(am__configure_deps) 508 $(am__cd) $(srcdir) && $(AUTOCONF) 509$(ACLOCAL_M4): $(am__aclocal_m4_deps) 510 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 511$(am__aclocal_m4_deps): 512 513config.h: stamp-h1 514 @test -f $@ || rm -f stamp-h1 515 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 516 517stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status 518 @rm -f stamp-h1 519 cd $(top_builddir) && $(SHELL) ./config.status config.h 520$(srcdir)/config.h.in: $(am__configure_deps) 521 ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) 522 rm -f stamp-h1 523 touch $@ 524 525distclean-hdr: 526 -rm -f config.h stamp-h1 527 528mostlyclean-libtool: 529 -rm -f *.lo 530 531clean-libtool: 532 -rm -rf .libs _libs 533 534distclean-libtool: 535 -rm -f libtool config.lt 536install-systemdsystemunitDATA: $(systemdsystemunit_DATA) 537 @$(NORMAL_INSTALL) 538 @list='$(systemdsystemunit_DATA)'; test -n "$(systemdsystemunitdir)" || list=; \ 539 if test -n "$$list"; then \ 540 echo " $(MKDIR_P) '$(DESTDIR)$(systemdsystemunitdir)'"; \ 541 $(MKDIR_P) "$(DESTDIR)$(systemdsystemunitdir)" || exit 1; \ 542 fi; \ 543 for p in $$list; do \ 544 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 545 echo "$$d$$p"; \ 546 done | $(am__base_list) | \ 547 while read files; do \ 548 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(systemdsystemunitdir)'"; \ 549 $(INSTALL_DATA) $$files "$(DESTDIR)$(systemdsystemunitdir)" || exit $$?; \ 550 done 551 552uninstall-systemdsystemunitDATA: 553 @$(NORMAL_UNINSTALL) 554 @list='$(systemdsystemunit_DATA)'; test -n "$(systemdsystemunitdir)" || list=; \ 555 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 556 dir='$(DESTDIR)$(systemdsystemunitdir)'; $(am__uninstall_files_from_dir) 557 558# This directory's subdirectories are mostly independent; you can cd 559# into them and run 'make' without going through this Makefile. 560# To change the values of 'make' variables: instead of editing Makefiles, 561# (1) if the variable is set in 'config.status', edit 'config.status' 562# (which will cause the Makefiles to be regenerated when you run 'make'); 563# (2) otherwise, pass the desired values on the 'make' command line. 564$(am__recursive_targets): 565 @fail=; \ 566 if $(am__make_keepgoing); then \ 567 failcom='fail=yes'; \ 568 else \ 569 failcom='exit 1'; \ 570 fi; \ 571 dot_seen=no; \ 572 target=`echo $@ | sed s/-recursive//`; \ 573 case "$@" in \ 574 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 575 *) list='$(SUBDIRS)' ;; \ 576 esac; \ 577 for subdir in $$list; do \ 578 echo "Making $$target in $$subdir"; \ 579 if test "$$subdir" = "."; then \ 580 dot_seen=yes; \ 581 local_target="$$target-am"; \ 582 else \ 583 local_target="$$target"; \ 584 fi; \ 585 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 586 || eval $$failcom; \ 587 done; \ 588 if test "$$dot_seen" = "no"; then \ 589 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 590 fi; test -z "$$fail" 591 592ID: $(am__tagged_files) 593 $(am__define_uniq_tagged_files); mkid -fID $$unique 594tags: tags-recursive 595TAGS: tags 596 597tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 598 set x; \ 599 here=`pwd`; \ 600 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 601 include_option=--etags-include; \ 602 empty_fix=.; \ 603 else \ 604 include_option=--include; \ 605 empty_fix=; \ 606 fi; \ 607 list='$(SUBDIRS)'; for subdir in $$list; do \ 608 if test "$$subdir" = .; then :; else \ 609 test ! -f $$subdir/TAGS || \ 610 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 611 fi; \ 612 done; \ 613 $(am__define_uniq_tagged_files); \ 614 shift; \ 615 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 616 test -n "$$unique" || unique=$$empty_fix; \ 617 if test $$# -gt 0; then \ 618 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 619 "$$@" $$unique; \ 620 else \ 621 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 622 $$unique; \ 623 fi; \ 624 fi 625ctags: ctags-recursive 626 627CTAGS: ctags 628ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 629 $(am__define_uniq_tagged_files); \ 630 test -z "$(CTAGS_ARGS)$$unique" \ 631 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 632 $$unique 633 634GTAGS: 635 here=`$(am__cd) $(top_builddir) && pwd` \ 636 && $(am__cd) $(top_srcdir) \ 637 && gtags -i $(GTAGS_ARGS) "$$here" 638cscope: cscope.files 639 test ! -s cscope.files \ 640 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 641clean-cscope: 642 -rm -f cscope.files 643cscope.files: clean-cscope cscopelist 644cscopelist: cscopelist-recursive 645 646cscopelist-am: $(am__tagged_files) 647 list='$(am__tagged_files)'; \ 648 case "$(srcdir)" in \ 649 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 650 *) sdir=$(subdir)/$(srcdir) ;; \ 651 esac; \ 652 for i in $$list; do \ 653 if test -f "$$i"; then \ 654 echo "$(subdir)/$$i"; \ 655 else \ 656 echo "$$sdir/$$i"; \ 657 fi; \ 658 done >> $(top_builddir)/cscope.files 659 660distclean-tags: 661 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 662 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 663 664distdir: $(DISTFILES) 665 $(am__remove_distdir) 666 test -d "$(distdir)" || mkdir "$(distdir)" 667 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 668 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 669 list='$(DISTFILES)'; \ 670 dist_files=`for file in $$list; do echo $$file; done | \ 671 sed -e "s|^$$srcdirstrip/||;t" \ 672 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 673 case $$dist_files in \ 674 */*) $(MKDIR_P) `echo "$$dist_files" | \ 675 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 676 sort -u` ;; \ 677 esac; \ 678 for file in $$dist_files; do \ 679 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 680 if test -d $$d/$$file; then \ 681 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 682 if test -d "$(distdir)/$$file"; then \ 683 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 684 fi; \ 685 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 686 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 687 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 688 fi; \ 689 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 690 else \ 691 test -f "$(distdir)/$$file" \ 692 || cp -p $$d/$$file "$(distdir)/$$file" \ 693 || exit 1; \ 694 fi; \ 695 done 696 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 697 if test "$$subdir" = .; then :; else \ 698 $(am__make_dryrun) \ 699 || test -d "$(distdir)/$$subdir" \ 700 || $(MKDIR_P) "$(distdir)/$$subdir" \ 701 || exit 1; \ 702 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 703 $(am__relativize); \ 704 new_distdir=$$reldir; \ 705 dir1=$$subdir; dir2="$(top_distdir)"; \ 706 $(am__relativize); \ 707 new_top_distdir=$$reldir; \ 708 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 709 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 710 ($(am__cd) $$subdir && \ 711 $(MAKE) $(AM_MAKEFLAGS) \ 712 top_distdir="$$new_top_distdir" \ 713 distdir="$$new_distdir" \ 714 am__remove_distdir=: \ 715 am__skip_length_check=: \ 716 am__skip_mode_fix=: \ 717 distdir) \ 718 || exit 1; \ 719 fi; \ 720 done 721 $(MAKE) $(AM_MAKEFLAGS) \ 722 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 723 dist-hook 724 -test -n "$(am__skip_mode_fix)" \ 725 || find "$(distdir)" -type d ! -perm -755 \ 726 -exec chmod u+rwx,go+rx {} \; -o \ 727 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 728 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 729 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 730 || chmod -R a+r "$(distdir)" 731dist-gzip: distdir 732 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz 733 $(am__post_remove_distdir) 734dist-bzip2: distdir 735 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 736 $(am__post_remove_distdir) 737 738dist-lzip: distdir 739 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 740 $(am__post_remove_distdir) 741 742dist-xz: distdir 743 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 744 $(am__post_remove_distdir) 745 746dist-tarZ: distdir 747 @echo WARNING: "Support for distribution archives compressed with" \ 748 "legacy program 'compress' is deprecated." >&2 749 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 750 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 751 $(am__post_remove_distdir) 752 753dist-shar: distdir 754 @echo WARNING: "Support for shar distribution archives is" \ 755 "deprecated." >&2 756 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 757 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz 758 $(am__post_remove_distdir) 759 760dist-zip: distdir 761 -rm -f $(distdir).zip 762 zip -rq $(distdir).zip $(distdir) 763 $(am__post_remove_distdir) 764 765dist dist-all: 766 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 767 $(am__post_remove_distdir) 768 769# This target untars the dist file and tries a VPATH configuration. Then 770# it guarantees that the distribution is self-contained by making another 771# tarfile. 772distcheck: dist 773 case '$(DIST_ARCHIVES)' in \ 774 *.tar.gz*) \ 775 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ 776 *.tar.bz2*) \ 777 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 778 *.tar.lz*) \ 779 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 780 *.tar.xz*) \ 781 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 782 *.tar.Z*) \ 783 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 784 *.shar.gz*) \ 785 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ 786 *.zip*) \ 787 unzip $(distdir).zip ;;\ 788 esac 789 chmod -R a-w $(distdir) 790 chmod u+w $(distdir) 791 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 792 chmod a-w $(distdir) 793 test -d $(distdir)/_build || exit 0; \ 794 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 795 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 796 && am__cwd=`pwd` \ 797 && $(am__cd) $(distdir)/_build/sub \ 798 && ../../configure \ 799 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 800 $(DISTCHECK_CONFIGURE_FLAGS) \ 801 --srcdir=../.. --prefix="$$dc_install_base" \ 802 && $(MAKE) $(AM_MAKEFLAGS) \ 803 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 804 && $(MAKE) $(AM_MAKEFLAGS) check \ 805 && $(MAKE) $(AM_MAKEFLAGS) install \ 806 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 807 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 808 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 809 distuninstallcheck \ 810 && chmod -R a-w "$$dc_install_base" \ 811 && ({ \ 812 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 813 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 814 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 815 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 816 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 817 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 818 && rm -rf "$$dc_destdir" \ 819 && $(MAKE) $(AM_MAKEFLAGS) dist \ 820 && rm -rf $(DIST_ARCHIVES) \ 821 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 822 && cd "$$am__cwd" \ 823 || exit 1 824 $(am__post_remove_distdir) 825 @(echo "$(distdir) archives ready for distribution: "; \ 826 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 827 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 828distuninstallcheck: 829 @test -n '$(distuninstallcheck_dir)' || { \ 830 echo 'ERROR: trying to run $@ with an empty' \ 831 '$$(distuninstallcheck_dir)' >&2; \ 832 exit 1; \ 833 }; \ 834 $(am__cd) '$(distuninstallcheck_dir)' || { \ 835 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 836 exit 1; \ 837 }; \ 838 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 839 || { echo "ERROR: files left after uninstall:" ; \ 840 if test -n "$(DESTDIR)"; then \ 841 echo " (check DESTDIR support)"; \ 842 fi ; \ 843 $(distuninstallcheck_listfiles) ; \ 844 exit 1; } >&2 845distcleancheck: distclean 846 @if test '$(srcdir)' = . ; then \ 847 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 848 exit 1 ; \ 849 fi 850 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 851 || { echo "ERROR: files left in build directory after distclean:" ; \ 852 $(distcleancheck_listfiles) ; \ 853 exit 1; } >&2 854check-am: all-am 855check: check-recursive 856all-am: Makefile $(DATA) config.h 857installdirs: installdirs-recursive 858installdirs-am: 859 for dir in "$(DESTDIR)$(systemdsystemunitdir)"; do \ 860 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 861 done 862install: install-recursive 863install-exec: install-exec-recursive 864install-data: install-data-recursive 865uninstall: uninstall-recursive 866 867install-am: all-am 868 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 869 870installcheck: installcheck-recursive 871install-strip: 872 if test -z '$(STRIP)'; then \ 873 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 874 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 875 install; \ 876 else \ 877 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 878 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 879 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 880 fi 881mostlyclean-generic: 882 883clean-generic: 884 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) 885 886distclean-generic: 887 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 888 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 889 890maintainer-clean-generic: 891 @echo "This command is intended for maintainers to use" 892 @echo "it deletes files that may require special tools to rebuild." 893 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) 894clean: clean-recursive 895 896clean-am: clean-generic clean-libtool mostlyclean-am 897 898distclean: distclean-recursive 899 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 900 -rm -f Makefile 901distclean-am: clean-am distclean-generic distclean-hdr \ 902 distclean-libtool distclean-tags 903 904dvi: dvi-recursive 905 906dvi-am: 907 908html: html-recursive 909 910html-am: 911 912info: info-recursive 913 914info-am: 915 916install-data-am: install-systemdsystemunitDATA 917 918install-dvi: install-dvi-recursive 919 920install-dvi-am: 921 922install-exec-am: 923 924install-html: install-html-recursive 925 926install-html-am: 927 928install-info: install-info-recursive 929 930install-info-am: 931 932install-man: 933 934install-pdf: install-pdf-recursive 935 936install-pdf-am: 937 938install-ps: install-ps-recursive 939 940install-ps-am: 941 942installcheck-am: 943 944maintainer-clean: maintainer-clean-recursive 945 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 946 -rm -rf $(top_srcdir)/autom4te.cache 947 -rm -f Makefile 948maintainer-clean-am: distclean-am maintainer-clean-generic 949 950mostlyclean: mostlyclean-recursive 951 952mostlyclean-am: mostlyclean-generic mostlyclean-libtool 953 954pdf: pdf-recursive 955 956pdf-am: 957 958ps: ps-recursive 959 960ps-am: 961 962uninstall-am: uninstall-systemdsystemunitDATA 963 964.MAKE: $(am__recursive_targets) all install-am install-strip 965 966.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 967 am--refresh check check-am clean clean-cscope clean-generic \ 968 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 969 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ 970 dist-tarZ dist-xz dist-zip distcheck distclean \ 971 distclean-generic distclean-hdr distclean-libtool \ 972 distclean-tags distcleancheck distdir distuninstallcheck dvi \ 973 dvi-am html html-am info info-am install install-am \ 974 install-data install-data-am install-dvi install-dvi-am \ 975 install-exec install-exec-am install-html install-html-am \ 976 install-info install-info-am install-man install-pdf \ 977 install-pdf-am install-ps install-ps-am install-strip \ 978 install-systemdsystemunitDATA installcheck installcheck-am \ 979 installdirs installdirs-am maintainer-clean \ 980 maintainer-clean-generic mostlyclean mostlyclean-generic \ 981 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ 982 uninstall-am uninstall-systemdsystemunitDATA 983 984.PRECIOUS: Makefile 985 986 987@LINT_TRUE@lint: 988@LINT_TRUE@ $(LINT) $(ALL_LINT_FLAGS) $(xdm_CFLAGS) $(xdm_SOURCES) $(xdm_LIBS) 989@LINT_TRUE@ (cd xdm && $(MAKE) $(AM_MAKEFLAGS) lint) 990@LINT_TRUE@ (cd xdmshell && $(MAKE) $(AM_MAKEFLAGS) lint) 991@LINT_TRUE@ (cd greeter && $(MAKE) $(AM_MAKEFLAGS) lint) 992@LINT_TRUE@ (cd chooser && $(MAKE) $(AM_MAKEFLAGS) lint) 993 994@HAVE_SYSTEMD_TRUE@xdm.service: xdm.service.in Makefile 995@HAVE_SYSTEMD_TRUE@@USE_SYSTEMD_DAEMON_TRUE@ $(AM_V_GEN)$(SED) -e 's|BINDIR|$(bindir)|g' < ${srcdir}/xdm.service.in > $@ 996@HAVE_SYSTEMD_TRUE@@USE_SYSTEMD_DAEMON_FALSE@ $(AM_V_GEN)$(SED) -e 's|BINDIR|$(bindir)|g' -e '/[Nn]otify/d' < ${srcdir}/xdm.service.in > $@ 997 998.PHONY: ChangeLog INSTALL 999 1000INSTALL: 1001 $(INSTALL_CMD) 1002 1003ChangeLog: 1004 $(CHANGELOG_CMD) 1005 1006dist-hook: ChangeLog INSTALL 1007 1008# Tell versions [3.59,3.63) of GNU make to not export all variables. 1009# Otherwise a system limit (for SysV at least) may be exceeded. 1010.NOEXPORT: 1011