1 /* 2 * Common functions for CAM "type" (peripheral) drivers. 3 * 4 * Copyright (c) 1997, 1998 Justin T. Gibbs. 5 * Copyright (c) 1997, 1998, 1999, 2000 Kenneth D. Merry. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions, and the following disclaimer, 13 * without modification, immediately at the beginning of the file. 14 * 2. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 21 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * 29 * $FreeBSD: src/sys/cam/cam_periph.c,v 1.24.2.3 2003/01/25 19:04:40 dillon Exp $ 30 * $DragonFly: src/sys/bus/cam/cam_periph.c,v 1.7 2004/01/30 05:42:09 dillon Exp $ 31 */ 32 33 #include <sys/param.h> 34 #include <sys/systm.h> 35 #include <sys/types.h> 36 #include <sys/malloc.h> 37 #include <sys/linker_set.h> 38 #include <sys/buf.h> 39 #include <sys/proc.h> 40 #include <sys/devicestat.h> 41 #include <sys/bus.h> 42 #include <vm/vm.h> 43 #include <vm/vm_extern.h> 44 45 #include "cam.h" 46 #include "cam_ccb.h" 47 #include "cam_xpt_periph.h" 48 #include "cam_periph.h" 49 #include "cam_debug.h" 50 51 #include <bus/cam/scsi/scsi_all.h> 52 #include <bus/cam/scsi/scsi_message.h> 53 #include <bus/cam/scsi/scsi_da.h> 54 #include <bus/cam/scsi/scsi_pass.h> 55 56 static u_int camperiphnextunit(struct periph_driver *p_drv, 57 u_int newunit, int wired, 58 path_id_t pathid, target_id_t target, 59 lun_id_t lun); 60 static u_int camperiphunit(struct periph_driver *p_drv, 61 path_id_t pathid, target_id_t target, 62 lun_id_t lun); 63 static void camperiphdone(struct cam_periph *periph, 64 union ccb *done_ccb); 65 static void camperiphfree(struct cam_periph *periph); 66 67 cam_status 68 cam_periph_alloc(periph_ctor_t *periph_ctor, 69 periph_oninv_t *periph_oninvalidate, 70 periph_dtor_t *periph_dtor, periph_start_t *periph_start, 71 char *name, cam_periph_type type, struct cam_path *path, 72 ac_callback_t *ac_callback, ac_code code, void *arg) 73 { 74 struct periph_driver **p_drv; 75 struct cam_periph *periph; 76 struct cam_periph *cur_periph; 77 path_id_t path_id; 78 target_id_t target_id; 79 lun_id_t lun_id; 80 cam_status status; 81 u_int init_level; 82 int s; 83 84 init_level = 0; 85 /* 86 * Handle Hot-Plug scenarios. If there is already a peripheral 87 * of our type assigned to this path, we are likely waiting for 88 * final close on an old, invalidated, peripheral. If this is 89 * the case, queue up a deferred call to the peripheral's async 90 * handler. If it looks like a mistaken re-alloation, complain. 91 */ 92 if ((periph = cam_periph_find(path, name)) != NULL) { 93 94 if ((periph->flags & CAM_PERIPH_INVALID) != 0 95 && (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) == 0) { 96 periph->flags |= CAM_PERIPH_NEW_DEV_FOUND; 97 periph->deferred_callback = ac_callback; 98 periph->deferred_ac = code; 99 return (CAM_REQ_INPROG); 100 } else { 101 printf("cam_periph_alloc: attempt to re-allocate " 102 "valid device %s%d rejected\n", 103 periph->periph_name, periph->unit_number); 104 } 105 return (CAM_REQ_INVALID); 106 } 107 108 periph = (struct cam_periph *)malloc(sizeof(*periph), M_DEVBUF, 109 M_NOWAIT); 110 111 if (periph == NULL) 112 return (CAM_RESRC_UNAVAIL); 113 114 init_level++; 115 116 SET_FOREACH(p_drv, periphdriver_set) { 117 if (strcmp((*p_drv)->driver_name, name) == 0) 118 break; 119 } 120 121 path_id = xpt_path_path_id(path); 122 target_id = xpt_path_target_id(path); 123 lun_id = xpt_path_lun_id(path); 124 bzero(periph, sizeof(*periph)); 125 cam_init_pinfo(&periph->pinfo); 126 periph->periph_start = periph_start; 127 periph->periph_dtor = periph_dtor; 128 periph->periph_oninval = periph_oninvalidate; 129 periph->type = type; 130 periph->periph_name = name; 131 periph->unit_number = camperiphunit(*p_drv, path_id, target_id, lun_id); 132 periph->immediate_priority = CAM_PRIORITY_NONE; 133 periph->refcount = 0; 134 SLIST_INIT(&periph->ccb_list); 135 status = xpt_create_path(&path, periph, path_id, target_id, lun_id); 136 if (status != CAM_REQ_CMP) 137 goto failure; 138 139 periph->path = path; 140 init_level++; 141 142 status = xpt_add_periph(periph); 143 144 if (status != CAM_REQ_CMP) 145 goto failure; 146 147 s = splsoftcam(); 148 cur_periph = TAILQ_FIRST(&(*p_drv)->units); 149 while (cur_periph != NULL 150 && cur_periph->unit_number < periph->unit_number) 151 cur_periph = TAILQ_NEXT(cur_periph, unit_links); 152 153 if (cur_periph != NULL) 154 TAILQ_INSERT_BEFORE(cur_periph, periph, unit_links); 155 else { 156 TAILQ_INSERT_TAIL(&(*p_drv)->units, periph, unit_links); 157 (*p_drv)->generation++; 158 } 159 160 splx(s); 161 162 init_level++; 163 164 status = periph_ctor(periph, arg); 165 166 if (status == CAM_REQ_CMP) 167 init_level++; 168 169 failure: 170 switch (init_level) { 171 case 4: 172 /* Initialized successfully */ 173 break; 174 case 3: 175 s = splsoftcam(); 176 TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links); 177 splx(s); 178 xpt_remove_periph(periph); 179 case 2: 180 xpt_free_path(periph->path); 181 case 1: 182 free(periph, M_DEVBUF); 183 case 0: 184 /* No cleanup to perform. */ 185 break; 186 default: 187 panic("cam_periph_alloc: Unkown init level"); 188 } 189 return(status); 190 } 191 192 /* 193 * Find a peripheral structure with the specified path, target, lun, 194 * and (optionally) type. If the name is NULL, this function will return 195 * the first peripheral driver that matches the specified path. 196 */ 197 struct cam_periph * 198 cam_periph_find(struct cam_path *path, char *name) 199 { 200 struct periph_driver **p_drv; 201 struct cam_periph *periph; 202 int s; 203 204 SET_FOREACH(p_drv, periphdriver_set) { 205 if (name != NULL && (strcmp((*p_drv)->driver_name, name) != 0)) 206 continue; 207 208 s = splsoftcam(); 209 for (periph = TAILQ_FIRST(&(*p_drv)->units); periph != NULL; 210 periph = TAILQ_NEXT(periph, unit_links)) { 211 if (xpt_path_comp(periph->path, path) == 0) { 212 splx(s); 213 return(periph); 214 } 215 } 216 splx(s); 217 if (name != NULL) 218 return(NULL); 219 } 220 return(NULL); 221 } 222 223 cam_status 224 cam_periph_acquire(struct cam_periph *periph) 225 { 226 int s; 227 228 if (periph == NULL) 229 return(CAM_REQ_CMP_ERR); 230 231 s = splsoftcam(); 232 periph->refcount++; 233 splx(s); 234 235 return(CAM_REQ_CMP); 236 } 237 238 void 239 cam_periph_release(struct cam_periph *periph) 240 { 241 int s; 242 243 if (periph == NULL) 244 return; 245 246 s = splsoftcam(); 247 if ((--periph->refcount == 0) 248 && (periph->flags & CAM_PERIPH_INVALID)) { 249 camperiphfree(periph); 250 } 251 splx(s); 252 253 } 254 255 /* 256 * Look for the next unit number that is not currently in use for this 257 * peripheral type starting at "newunit". Also exclude unit numbers that 258 * are reserved by for future "hardwiring" unless we already know that this 259 * is a potential wired device. Only assume that the device is "wired" the 260 * first time through the loop since after that we'll be looking at unit 261 * numbers that did not match a wiring entry. 262 */ 263 static u_int 264 camperiphnextunit(struct periph_driver *p_drv, u_int newunit, int wired, 265 path_id_t pathid, target_id_t target, lun_id_t lun) 266 { 267 struct cam_periph *periph; 268 char *periph_name, *strval; 269 int s; 270 int i, val, dunit; 271 const char *dname; 272 273 s = splsoftcam(); 274 periph_name = p_drv->driver_name; 275 for (;;newunit++) { 276 277 for (periph = TAILQ_FIRST(&p_drv->units); 278 periph != NULL && periph->unit_number != newunit; 279 periph = TAILQ_NEXT(periph, unit_links)) 280 ; 281 282 if (periph != NULL && periph->unit_number == newunit) { 283 if (wired != 0) { 284 xpt_print_path(periph->path); 285 printf("Duplicate Wired Device entry!\n"); 286 xpt_print_path(periph->path); 287 printf("Second device (%s device at scbus%d " 288 "target %d lun %d) will not be wired\n", 289 periph_name, pathid, target, lun); 290 wired = 0; 291 } 292 continue; 293 } 294 if (wired) 295 break; 296 297 /* 298 * Don't match entries like "da 4" as a wired down 299 * device, but do match entries like "da 4 target 5" 300 * or even "da 4 scbus 1". 301 */ 302 i = -1; 303 while ((i = resource_locate(i, periph_name)) != -1) { 304 dname = resource_query_name(i); 305 dunit = resource_query_unit(i); 306 /* if no "target" and no specific scbus, skip */ 307 if (resource_int_value(dname, dunit, "target", &val) && 308 (resource_string_value(dname, dunit, "at",&strval)|| 309 strcmp(strval, "scbus") == 0)) 310 continue; 311 if (newunit == dunit) 312 break; 313 } 314 if (i == -1) 315 break; 316 } 317 splx(s); 318 return (newunit); 319 } 320 321 static u_int 322 camperiphunit(struct periph_driver *p_drv, path_id_t pathid, 323 target_id_t target, lun_id_t lun) 324 { 325 u_int unit; 326 int hit, i, val, dunit; 327 const char *dname; 328 char pathbuf[32], *strval, *periph_name; 329 330 unit = 0; 331 332 periph_name = p_drv->driver_name; 333 snprintf(pathbuf, sizeof(pathbuf), "scbus%d", pathid); 334 i = -1; 335 for (hit = 0; (i = resource_locate(i, periph_name)) != -1; hit = 0) { 336 dname = resource_query_name(i); 337 dunit = resource_query_unit(i); 338 if (resource_string_value(dname, dunit, "at", &strval) == 0) { 339 if (strcmp(strval, pathbuf) != 0) 340 continue; 341 hit++; 342 } 343 if (resource_int_value(dname, dunit, "target", &val) == 0) { 344 if (val != target) 345 continue; 346 hit++; 347 } 348 if (resource_int_value(dname, dunit, "lun", &val) == 0) { 349 if (val != lun) 350 continue; 351 hit++; 352 } 353 if (hit != 0) { 354 unit = dunit; 355 break; 356 } 357 } 358 359 /* 360 * Either start from 0 looking for the next unit or from 361 * the unit number given in the resource config. This way, 362 * if we have wildcard matches, we don't return the same 363 * unit number twice. 364 */ 365 unit = camperiphnextunit(p_drv, unit, /*wired*/hit, pathid, 366 target, lun); 367 368 return (unit); 369 } 370 371 void 372 cam_periph_invalidate(struct cam_periph *periph) 373 { 374 int s; 375 376 s = splsoftcam(); 377 /* 378 * We only call this routine the first time a peripheral is 379 * invalidated. The oninvalidate() routine is always called at 380 * splsoftcam(). 381 */ 382 if (((periph->flags & CAM_PERIPH_INVALID) == 0) 383 && (periph->periph_oninval != NULL)) 384 periph->periph_oninval(periph); 385 386 periph->flags |= CAM_PERIPH_INVALID; 387 periph->flags &= ~CAM_PERIPH_NEW_DEV_FOUND; 388 389 if (periph->refcount == 0) 390 camperiphfree(periph); 391 else if (periph->refcount < 0) 392 printf("cam_invalidate_periph: refcount < 0!!\n"); 393 splx(s); 394 } 395 396 static void 397 camperiphfree(struct cam_periph *periph) 398 { 399 int s; 400 struct periph_driver **p_drv; 401 402 SET_FOREACH(p_drv, periphdriver_set) { 403 if (strcmp((*p_drv)->driver_name, periph->periph_name) == 0) 404 break; 405 } 406 407 if (periph->periph_dtor != NULL) 408 periph->periph_dtor(periph); 409 410 s = splsoftcam(); 411 TAILQ_REMOVE(&(*p_drv)->units, periph, unit_links); 412 (*p_drv)->generation++; 413 splx(s); 414 415 xpt_remove_periph(periph); 416 417 if (periph->flags & CAM_PERIPH_NEW_DEV_FOUND) { 418 union ccb ccb; 419 void *arg; 420 421 switch (periph->deferred_ac) { 422 case AC_FOUND_DEVICE: 423 ccb.ccb_h.func_code = XPT_GDEV_TYPE; 424 xpt_setup_ccb(&ccb.ccb_h, periph->path, /*priority*/ 1); 425 xpt_action(&ccb); 426 arg = &ccb; 427 break; 428 case AC_PATH_REGISTERED: 429 ccb.ccb_h.func_code = XPT_PATH_INQ; 430 xpt_setup_ccb(&ccb.ccb_h, periph->path, /*priority*/ 1); 431 xpt_action(&ccb); 432 arg = &ccb; 433 break; 434 default: 435 arg = NULL; 436 break; 437 } 438 periph->deferred_callback(NULL, periph->deferred_ac, 439 periph->path, arg); 440 } 441 xpt_free_path(periph->path); 442 free(periph, M_DEVBUF); 443 } 444 445 /* 446 * Wait interruptibly for an exclusive lock. 447 */ 448 int 449 cam_periph_lock(struct cam_periph *periph, int flags) 450 { 451 int error; 452 453 while ((periph->flags & CAM_PERIPH_LOCKED) != 0) { 454 periph->flags |= CAM_PERIPH_LOCK_WANTED; 455 if ((error = tsleep(periph, flags, "caplck", 0)) != 0) 456 return error; 457 } 458 459 if (cam_periph_acquire(periph) != CAM_REQ_CMP) 460 return(ENXIO); 461 462 periph->flags |= CAM_PERIPH_LOCKED; 463 return 0; 464 } 465 466 /* 467 * Unlock and wake up any waiters. 468 */ 469 void 470 cam_periph_unlock(struct cam_periph *periph) 471 { 472 periph->flags &= ~CAM_PERIPH_LOCKED; 473 if ((periph->flags & CAM_PERIPH_LOCK_WANTED) != 0) { 474 periph->flags &= ~CAM_PERIPH_LOCK_WANTED; 475 wakeup(periph); 476 } 477 478 cam_periph_release(periph); 479 } 480 481 /* 482 * Map user virtual pointers into kernel virtual address space, so we can 483 * access the memory. This won't work on physical pointers, for now it's 484 * up to the caller to check for that. (XXX KDM -- should we do that here 485 * instead?) This also only works for up to MAXPHYS memory. Since we use 486 * buffers to map stuff in and out, we're limited to the buffer size. 487 */ 488 int 489 cam_periph_mapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo) 490 { 491 int numbufs, i, j; 492 int flags[CAM_PERIPH_MAXMAPS]; 493 u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS]; 494 u_int32_t lengths[CAM_PERIPH_MAXMAPS]; 495 u_int32_t dirs[CAM_PERIPH_MAXMAPS]; 496 497 switch(ccb->ccb_h.func_code) { 498 case XPT_DEV_MATCH: 499 if (ccb->cdm.match_buf_len == 0) { 500 printf("cam_periph_mapmem: invalid match buffer " 501 "length 0\n"); 502 return(EINVAL); 503 } 504 if (ccb->cdm.pattern_buf_len > 0) { 505 data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns; 506 lengths[0] = ccb->cdm.pattern_buf_len; 507 dirs[0] = CAM_DIR_OUT; 508 data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches; 509 lengths[1] = ccb->cdm.match_buf_len; 510 dirs[1] = CAM_DIR_IN; 511 numbufs = 2; 512 } else { 513 data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches; 514 lengths[0] = ccb->cdm.match_buf_len; 515 dirs[0] = CAM_DIR_IN; 516 numbufs = 1; 517 } 518 break; 519 case XPT_SCSI_IO: 520 case XPT_CONT_TARGET_IO: 521 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_NONE) 522 return(0); 523 524 data_ptrs[0] = &ccb->csio.data_ptr; 525 lengths[0] = ccb->csio.dxfer_len; 526 dirs[0] = ccb->ccb_h.flags & CAM_DIR_MASK; 527 numbufs = 1; 528 break; 529 default: 530 return(EINVAL); 531 break; /* NOTREACHED */ 532 } 533 534 /* 535 * Check the transfer length and permissions first, so we don't 536 * have to unmap any previously mapped buffers. 537 */ 538 for (i = 0; i < numbufs; i++) { 539 540 flags[i] = 0; 541 542 /* 543 * The userland data pointer passed in may not be page 544 * aligned. vmapbuf() truncates the address to a page 545 * boundary, so if the address isn't page aligned, we'll 546 * need enough space for the given transfer length, plus 547 * whatever extra space is necessary to make it to the page 548 * boundary. 549 */ 550 if ((lengths[i] + 551 (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)) > DFLTPHYS){ 552 printf("cam_periph_mapmem: attempt to map %lu bytes, " 553 "which is greater than DFLTPHYS(%d)\n", 554 (long)(lengths[i] + 555 (((vm_offset_t)(*data_ptrs[i])) & PAGE_MASK)), 556 DFLTPHYS); 557 return(E2BIG); 558 } 559 560 if (dirs[i] & CAM_DIR_OUT) { 561 flags[i] = B_WRITE; 562 if (!useracc(*data_ptrs[i], lengths[i], 563 VM_PROT_READ)) { 564 printf("cam_periph_mapmem: error, " 565 "address %p, length %lu isn't " 566 "user accessible for READ\n", 567 (void *)*data_ptrs[i], 568 (u_long)lengths[i]); 569 return(EACCES); 570 } 571 } 572 573 /* 574 * XXX this check is really bogus, since B_WRITE currently 575 * is all 0's, and so it is "set" all the time. 576 */ 577 if (dirs[i] & CAM_DIR_IN) { 578 flags[i] |= B_READ; 579 if (!useracc(*data_ptrs[i], lengths[i], 580 VM_PROT_WRITE)) { 581 printf("cam_periph_mapmem: error, " 582 "address %p, length %lu isn't " 583 "user accessible for WRITE\n", 584 (void *)*data_ptrs[i], 585 (u_long)lengths[i]); 586 587 return(EACCES); 588 } 589 } 590 591 } 592 593 for (i = 0; i < numbufs; i++) { 594 /* 595 * Get the buffer. 596 */ 597 mapinfo->bp[i] = getpbuf(NULL); 598 599 /* save the buffer's data address */ 600 mapinfo->bp[i]->b_saveaddr = mapinfo->bp[i]->b_data; 601 602 /* put our pointer in the data slot */ 603 mapinfo->bp[i]->b_data = *data_ptrs[i]; 604 605 /* set the transfer length, we know it's < DFLTPHYS */ 606 mapinfo->bp[i]->b_bufsize = lengths[i]; 607 608 /* set the flags */ 609 mapinfo->bp[i]->b_flags = flags[i] | B_PHYS; 610 611 /* map the buffer into kernel memory */ 612 if (vmapbuf(mapinfo->bp[i]) < 0) { 613 printf("cam_periph_mapmem: error, " 614 "address %p, length %lu isn't " 615 "user accessible any more\n", 616 (void *)*data_ptrs[i], 617 (u_long)lengths[i]); 618 for (j = 0; j < i; ++j) { 619 *data_ptrs[j] = mapinfo->bp[j]->b_saveaddr; 620 mapinfo->bp[j]->b_flags &= ~B_PHYS; 621 relpbuf(mapinfo->bp[j], NULL); 622 } 623 return(EACCES); 624 } 625 626 /* set our pointer to the new mapped area */ 627 *data_ptrs[i] = mapinfo->bp[i]->b_data; 628 629 mapinfo->num_bufs_used++; 630 } 631 632 return(0); 633 } 634 635 /* 636 * Unmap memory segments mapped into kernel virtual address space by 637 * cam_periph_mapmem(). 638 */ 639 void 640 cam_periph_unmapmem(union ccb *ccb, struct cam_periph_map_info *mapinfo) 641 { 642 int numbufs, i; 643 u_int8_t **data_ptrs[CAM_PERIPH_MAXMAPS]; 644 645 if (mapinfo->num_bufs_used <= 0) { 646 /* allow ourselves to be swapped once again */ 647 return; 648 } 649 650 switch (ccb->ccb_h.func_code) { 651 case XPT_DEV_MATCH: 652 numbufs = min(mapinfo->num_bufs_used, 2); 653 654 if (numbufs == 1) { 655 data_ptrs[0] = (u_int8_t **)&ccb->cdm.matches; 656 } else { 657 data_ptrs[0] = (u_int8_t **)&ccb->cdm.patterns; 658 data_ptrs[1] = (u_int8_t **)&ccb->cdm.matches; 659 } 660 break; 661 case XPT_SCSI_IO: 662 case XPT_CONT_TARGET_IO: 663 data_ptrs[0] = &ccb->csio.data_ptr; 664 numbufs = min(mapinfo->num_bufs_used, 1); 665 break; 666 default: 667 /* allow ourselves to be swapped once again */ 668 return; 669 break; /* NOTREACHED */ 670 } 671 672 for (i = 0; i < numbufs; i++) { 673 /* Set the user's pointer back to the original value */ 674 *data_ptrs[i] = mapinfo->bp[i]->b_saveaddr; 675 676 /* unmap the buffer */ 677 vunmapbuf(mapinfo->bp[i]); 678 679 /* clear the flags we set above */ 680 mapinfo->bp[i]->b_flags &= ~B_PHYS; 681 682 /* release the buffer */ 683 relpbuf(mapinfo->bp[i], NULL); 684 } 685 686 /* allow ourselves to be swapped once again */ 687 } 688 689 union ccb * 690 cam_periph_getccb(struct cam_periph *periph, u_int32_t priority) 691 { 692 struct ccb_hdr *ccb_h; 693 int s; 694 695 CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("entering cdgetccb\n")); 696 697 s = splsoftcam(); 698 699 while (periph->ccb_list.slh_first == NULL) { 700 if (periph->immediate_priority > priority) 701 periph->immediate_priority = priority; 702 xpt_schedule(periph, priority); 703 if ((periph->ccb_list.slh_first != NULL) 704 && (periph->ccb_list.slh_first->pinfo.priority == priority)) 705 break; 706 tsleep(&periph->ccb_list, 0, "cgticb", 0); 707 } 708 709 ccb_h = periph->ccb_list.slh_first; 710 SLIST_REMOVE_HEAD(&periph->ccb_list, periph_links.sle); 711 splx(s); 712 return ((union ccb *)ccb_h); 713 } 714 715 void 716 cam_periph_ccbwait(union ccb *ccb) 717 { 718 int s; 719 720 s = splsoftcam(); 721 if ((ccb->ccb_h.pinfo.index != CAM_UNQUEUED_INDEX) 722 || ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG)) 723 tsleep(&ccb->ccb_h.cbfcnp, 0, "cbwait", 0); 724 725 splx(s); 726 } 727 728 int 729 cam_periph_ioctl(struct cam_periph *periph, int cmd, caddr_t addr, 730 int (*error_routine)(union ccb *ccb, 731 cam_flags camflags, 732 u_int32_t sense_flags)) 733 { 734 union ccb *ccb; 735 int error; 736 int found; 737 738 error = found = 0; 739 740 switch(cmd){ 741 case CAMGETPASSTHRU: 742 ccb = cam_periph_getccb(periph, /* priority */ 1); 743 xpt_setup_ccb(&ccb->ccb_h, 744 ccb->ccb_h.path, 745 /*priority*/1); 746 ccb->ccb_h.func_code = XPT_GDEVLIST; 747 748 /* 749 * Basically, the point of this is that we go through 750 * getting the list of devices, until we find a passthrough 751 * device. In the current version of the CAM code, the 752 * only way to determine what type of device we're dealing 753 * with is by its name. 754 */ 755 while (found == 0) { 756 ccb->cgdl.index = 0; 757 ccb->cgdl.status = CAM_GDEVLIST_MORE_DEVS; 758 while (ccb->cgdl.status == CAM_GDEVLIST_MORE_DEVS) { 759 760 /* we want the next device in the list */ 761 xpt_action(ccb); 762 if (strncmp(ccb->cgdl.periph_name, 763 "pass", 4) == 0){ 764 found = 1; 765 break; 766 } 767 } 768 if ((ccb->cgdl.status == CAM_GDEVLIST_LAST_DEVICE) && 769 (found == 0)) { 770 ccb->cgdl.periph_name[0] = '\0'; 771 ccb->cgdl.unit_number = 0; 772 break; 773 } 774 } 775 776 /* copy the result back out */ 777 bcopy(ccb, addr, sizeof(union ccb)); 778 779 /* and release the ccb */ 780 xpt_release_ccb(ccb); 781 782 break; 783 default: 784 error = ENOTTY; 785 break; 786 } 787 return(error); 788 } 789 790 int 791 cam_periph_runccb(union ccb *ccb, 792 int (*error_routine)(union ccb *ccb, 793 cam_flags camflags, 794 u_int32_t sense_flags), 795 cam_flags camflags, u_int32_t sense_flags, 796 struct devstat *ds) 797 { 798 int error; 799 800 error = 0; 801 802 /* 803 * If the user has supplied a stats structure, and if we understand 804 * this particular type of ccb, record the transaction start. 805 */ 806 if ((ds != NULL) && (ccb->ccb_h.func_code == XPT_SCSI_IO)) 807 devstat_start_transaction(ds); 808 809 xpt_action(ccb); 810 811 do { 812 cam_periph_ccbwait(ccb); 813 if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) 814 error = 0; 815 else if (error_routine != NULL) 816 error = (*error_routine)(ccb, camflags, sense_flags); 817 else 818 error = 0; 819 820 } while (error == ERESTART); 821 822 if ((ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) 823 cam_release_devq(ccb->ccb_h.path, 824 /* relsim_flags */0, 825 /* openings */0, 826 /* timeout */0, 827 /* getcount_only */ FALSE); 828 829 if ((ds != NULL) && (ccb->ccb_h.func_code == XPT_SCSI_IO)) 830 devstat_end_transaction(ds, 831 ccb->csio.dxfer_len, 832 ccb->csio.tag_action & 0xf, 833 ((ccb->ccb_h.flags & CAM_DIR_MASK) == 834 CAM_DIR_NONE) ? DEVSTAT_NO_DATA : 835 (ccb->ccb_h.flags & CAM_DIR_OUT) ? 836 DEVSTAT_WRITE : 837 DEVSTAT_READ); 838 839 return(error); 840 } 841 842 void 843 cam_freeze_devq(struct cam_path *path) 844 { 845 struct ccb_hdr ccb_h; 846 847 xpt_setup_ccb(&ccb_h, path, /*priority*/1); 848 ccb_h.func_code = XPT_NOOP; 849 ccb_h.flags = CAM_DEV_QFREEZE; 850 xpt_action((union ccb *)&ccb_h); 851 } 852 853 u_int32_t 854 cam_release_devq(struct cam_path *path, u_int32_t relsim_flags, 855 u_int32_t openings, u_int32_t timeout, 856 int getcount_only) 857 { 858 struct ccb_relsim crs; 859 860 xpt_setup_ccb(&crs.ccb_h, path, 861 /*priority*/1); 862 crs.ccb_h.func_code = XPT_REL_SIMQ; 863 crs.ccb_h.flags = getcount_only ? CAM_DEV_QFREEZE : 0; 864 crs.release_flags = relsim_flags; 865 crs.openings = openings; 866 crs.release_timeout = timeout; 867 xpt_action((union ccb *)&crs); 868 return (crs.qfrozen_cnt); 869 } 870 871 #define saved_ccb_ptr ppriv_ptr0 872 static void 873 camperiphdone(struct cam_periph *periph, union ccb *done_ccb) 874 { 875 cam_status status; 876 int frozen; 877 int sense; 878 struct scsi_start_stop_unit *scsi_cmd; 879 u_int32_t relsim_flags, timeout; 880 u_int32_t qfrozen_cnt; 881 882 status = done_ccb->ccb_h.status; 883 frozen = (status & CAM_DEV_QFRZN) != 0; 884 sense = (status & CAM_AUTOSNS_VALID) != 0; 885 status &= CAM_STATUS_MASK; 886 887 timeout = 0; 888 relsim_flags = 0; 889 890 /* 891 * Unfreeze the queue once if it is already frozen.. 892 */ 893 if (frozen != 0) { 894 qfrozen_cnt = cam_release_devq(done_ccb->ccb_h.path, 895 /*relsim_flags*/0, 896 /*openings*/0, 897 /*timeout*/0, 898 /*getcount_only*/0); 899 } 900 901 switch (status) { 902 903 case CAM_REQ_CMP: 904 905 /* 906 * If we have successfully taken a device from the not 907 * ready to ready state, re-scan the device and re-get the 908 * inquiry information. Many devices (mostly disks) don't 909 * properly report their inquiry information unless they 910 * are spun up. 911 */ 912 if (done_ccb->ccb_h.func_code == XPT_SCSI_IO) { 913 scsi_cmd = (struct scsi_start_stop_unit *) 914 &done_ccb->csio.cdb_io.cdb_bytes; 915 916 if (scsi_cmd->opcode == START_STOP_UNIT) 917 xpt_async(AC_INQ_CHANGED, 918 done_ccb->ccb_h.path, NULL); 919 } 920 bcopy(done_ccb->ccb_h.saved_ccb_ptr, done_ccb, 921 sizeof(union ccb)); 922 923 periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG; 924 925 xpt_action(done_ccb); 926 927 break; 928 case CAM_SCSI_STATUS_ERROR: 929 scsi_cmd = (struct scsi_start_stop_unit *) 930 &done_ccb->csio.cdb_io.cdb_bytes; 931 if (sense != 0) { 932 struct scsi_sense_data *sense; 933 int error_code, sense_key, asc, ascq; 934 935 sense = &done_ccb->csio.sense_data; 936 scsi_extract_sense(sense, &error_code, 937 &sense_key, &asc, &ascq); 938 939 /* 940 * If the error is "invalid field in CDB", 941 * and the load/eject flag is set, turn the 942 * flag off and try again. This is just in 943 * case the drive in question barfs on the 944 * load eject flag. The CAM code should set 945 * the load/eject flag by default for 946 * removable media. 947 */ 948 949 /* XXX KDM 950 * Should we check to see what the specific 951 * scsi status is?? Or does it not matter 952 * since we already know that there was an 953 * error, and we know what the specific 954 * error code was, and we know what the 955 * opcode is.. 956 */ 957 if ((scsi_cmd->opcode == START_STOP_UNIT) && 958 ((scsi_cmd->how & SSS_LOEJ) != 0) && 959 (asc == 0x24) && (ascq == 0x00) && 960 (done_ccb->ccb_h.retry_count > 0)) { 961 962 scsi_cmd->how &= ~SSS_LOEJ; 963 964 xpt_action(done_ccb); 965 966 } else if (done_ccb->ccb_h.retry_count > 0) { 967 /* 968 * In this case, the error recovery 969 * command failed, but we've got 970 * some retries left on it. Give 971 * it another try. 972 */ 973 974 /* set the timeout to .5 sec */ 975 relsim_flags = 976 RELSIM_RELEASE_AFTER_TIMEOUT; 977 timeout = 500; 978 979 xpt_action(done_ccb); 980 981 break; 982 983 } else { 984 /* 985 * Copy the original CCB back and 986 * send it back to the caller. 987 */ 988 bcopy(done_ccb->ccb_h.saved_ccb_ptr, 989 done_ccb, sizeof(union ccb)); 990 991 periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG; 992 993 xpt_action(done_ccb); 994 } 995 } else { 996 /* 997 * Eh?? The command failed, but we don't 998 * have any sense. What's up with that? 999 * Fire the CCB again to return it to the 1000 * caller. 1001 */ 1002 bcopy(done_ccb->ccb_h.saved_ccb_ptr, 1003 done_ccb, sizeof(union ccb)); 1004 1005 periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG; 1006 1007 xpt_action(done_ccb); 1008 1009 } 1010 break; 1011 default: 1012 bcopy(done_ccb->ccb_h.saved_ccb_ptr, done_ccb, 1013 sizeof(union ccb)); 1014 1015 periph->flags &= ~CAM_PERIPH_RECOVERY_INPROG; 1016 1017 xpt_action(done_ccb); 1018 1019 break; 1020 } 1021 1022 /* decrement the retry count */ 1023 if (done_ccb->ccb_h.retry_count > 0) 1024 done_ccb->ccb_h.retry_count--; 1025 1026 qfrozen_cnt = cam_release_devq(done_ccb->ccb_h.path, 1027 /*relsim_flags*/relsim_flags, 1028 /*openings*/0, 1029 /*timeout*/timeout, 1030 /*getcount_only*/0); 1031 } 1032 1033 /* 1034 * Generic Async Event handler. Peripheral drivers usually 1035 * filter out the events that require personal attention, 1036 * and leave the rest to this function. 1037 */ 1038 void 1039 cam_periph_async(struct cam_periph *periph, u_int32_t code, 1040 struct cam_path *path, void *arg) 1041 { 1042 switch (code) { 1043 case AC_LOST_DEVICE: 1044 cam_periph_invalidate(periph); 1045 break; 1046 case AC_SENT_BDR: 1047 case AC_BUS_RESET: 1048 { 1049 cam_periph_bus_settle(periph, SCSI_DELAY); 1050 break; 1051 } 1052 default: 1053 break; 1054 } 1055 } 1056 1057 void 1058 cam_periph_bus_settle(struct cam_periph *periph, u_int bus_settle) 1059 { 1060 struct ccb_getdevstats cgds; 1061 1062 xpt_setup_ccb(&cgds.ccb_h, periph->path, /*priority*/1); 1063 cgds.ccb_h.func_code = XPT_GDEV_STATS; 1064 xpt_action((union ccb *)&cgds); 1065 cam_periph_freeze_after_event(periph, &cgds.last_reset, bus_settle); 1066 } 1067 1068 void 1069 cam_periph_freeze_after_event(struct cam_periph *periph, 1070 struct timeval* event_time, u_int duration_ms) 1071 { 1072 struct timeval delta; 1073 struct timeval duration_tv; 1074 1075 microuptime(&delta); 1076 timevalsub(&delta, event_time); 1077 duration_tv.tv_sec = duration_ms / 1000; 1078 duration_tv.tv_usec = (duration_ms % 1000) * 1000; 1079 if (timevalcmp(&delta, &duration_tv, <)) { 1080 timevalsub(&duration_tv, &delta); 1081 1082 duration_ms = duration_tv.tv_sec * 1000; 1083 duration_ms += duration_tv.tv_usec / 1000; 1084 cam_freeze_devq(periph->path); 1085 cam_release_devq(periph->path, 1086 RELSIM_RELEASE_AFTER_TIMEOUT, 1087 /*reduction*/0, 1088 /*timeout*/duration_ms, 1089 /*getcount_only*/0); 1090 } 1091 1092 } 1093 1094 /* 1095 * Generic error handler. Peripheral drivers usually filter 1096 * out the errors that they handle in a unique mannor, then 1097 * call this function. 1098 */ 1099 int 1100 cam_periph_error(union ccb *ccb, cam_flags camflags, 1101 u_int32_t sense_flags, union ccb *save_ccb) 1102 { 1103 cam_status status; 1104 int frozen; 1105 int sense; 1106 int error; 1107 int openings; 1108 int retry; 1109 u_int32_t relsim_flags; 1110 u_int32_t timeout; 1111 1112 status = ccb->ccb_h.status; 1113 frozen = (status & CAM_DEV_QFRZN) != 0; 1114 sense = (status & CAM_AUTOSNS_VALID) != 0; 1115 status &= CAM_STATUS_MASK; 1116 relsim_flags = 0; 1117 1118 switch (status) { 1119 case CAM_REQ_CMP: 1120 /* decrement the number of retries */ 1121 retry = ccb->ccb_h.retry_count > 0; 1122 if (retry) 1123 ccb->ccb_h.retry_count--; 1124 error = 0; 1125 break; 1126 case CAM_AUTOSENSE_FAIL: 1127 case CAM_SCSI_STATUS_ERROR: 1128 1129 switch (ccb->csio.scsi_status) { 1130 case SCSI_STATUS_OK: 1131 case SCSI_STATUS_COND_MET: 1132 case SCSI_STATUS_INTERMED: 1133 case SCSI_STATUS_INTERMED_COND_MET: 1134 error = 0; 1135 break; 1136 case SCSI_STATUS_CMD_TERMINATED: 1137 case SCSI_STATUS_CHECK_COND: 1138 if (sense != 0) { 1139 struct scsi_sense_data *sense; 1140 int error_code, sense_key, asc, ascq; 1141 struct cam_periph *periph; 1142 scsi_sense_action err_action; 1143 struct ccb_getdev cgd; 1144 1145 sense = &ccb->csio.sense_data; 1146 scsi_extract_sense(sense, &error_code, 1147 &sense_key, &asc, &ascq); 1148 periph = xpt_path_periph(ccb->ccb_h.path); 1149 1150 /* 1151 * Grab the inquiry data for this device. 1152 */ 1153 xpt_setup_ccb(&cgd.ccb_h, ccb->ccb_h.path, 1154 /*priority*/ 1); 1155 cgd.ccb_h.func_code = XPT_GDEV_TYPE; 1156 xpt_action((union ccb *)&cgd); 1157 1158 err_action = scsi_error_action(asc, ascq, 1159 &cgd.inq_data); 1160 1161 /* 1162 * Send a Test Unit Ready to the device. 1163 * If the 'many' flag is set, we send 120 1164 * test unit ready commands, one every half 1165 * second. Otherwise, we just send one TUR. 1166 * We only want to do this if the retry 1167 * count has not been exhausted. 1168 */ 1169 if (((err_action & SS_MASK) == SS_TUR) 1170 && save_ccb != NULL 1171 && ccb->ccb_h.retry_count > 0) { 1172 1173 /* 1174 * Since error recovery is already 1175 * in progress, don't attempt to 1176 * process this error. It is probably 1177 * related to the error that caused 1178 * the currently active error recovery 1179 * action. Also, we only have 1180 * space for one saved CCB, so if we 1181 * had two concurrent error recovery 1182 * actions, we would end up 1183 * over-writing one error recovery 1184 * CCB with another one. 1185 */ 1186 if (periph->flags & 1187 CAM_PERIPH_RECOVERY_INPROG) { 1188 error = ERESTART; 1189 break; 1190 } 1191 1192 periph->flags |= 1193 CAM_PERIPH_RECOVERY_INPROG; 1194 1195 /* decrement the number of retries */ 1196 if ((err_action & 1197 SSQ_DECREMENT_COUNT) != 0) { 1198 retry = 1; 1199 ccb->ccb_h.retry_count--; 1200 } 1201 1202 bcopy(ccb, save_ccb, sizeof(*save_ccb)); 1203 1204 /* 1205 * We retry this one every half 1206 * second for a minute. If the 1207 * device hasn't become ready in a 1208 * minute's time, it's unlikely to 1209 * ever become ready. If the table 1210 * doesn't specify SSQ_MANY, we can 1211 * only try this once. Oh well. 1212 */ 1213 if ((err_action & SSQ_MANY) != 0) 1214 scsi_test_unit_ready(&ccb->csio, 1215 /*retries*/120, 1216 camperiphdone, 1217 MSG_SIMPLE_Q_TAG, 1218 SSD_FULL_SIZE, 1219 /*timeout*/5000); 1220 else 1221 scsi_test_unit_ready(&ccb->csio, 1222 /*retries*/1, 1223 camperiphdone, 1224 MSG_SIMPLE_Q_TAG, 1225 SSD_FULL_SIZE, 1226 /*timeout*/5000); 1227 1228 /* release the queue after .5 sec. */ 1229 relsim_flags = 1230 RELSIM_RELEASE_AFTER_TIMEOUT; 1231 timeout = 500; 1232 /* 1233 * Drop the priority to 0 so that 1234 * we are the first to execute. Also 1235 * freeze the queue after this command 1236 * is sent so that we can restore the 1237 * old csio and have it queued in the 1238 * proper order before we let normal 1239 * transactions go to the drive. 1240 */ 1241 ccb->ccb_h.pinfo.priority = 0; 1242 ccb->ccb_h.flags |= CAM_DEV_QFREEZE; 1243 1244 /* 1245 * Save a pointer to the original 1246 * CCB in the new CCB. 1247 */ 1248 ccb->ccb_h.saved_ccb_ptr = save_ccb; 1249 1250 error = ERESTART; 1251 } 1252 /* 1253 * Send a start unit command to the device, 1254 * and then retry the command. We only 1255 * want to do this if the retry count has 1256 * not been exhausted. If the user 1257 * specified 0 retries, then we follow 1258 * their request and do not retry. 1259 */ 1260 else if (((err_action & SS_MASK) == SS_START) 1261 && save_ccb != NULL 1262 && ccb->ccb_h.retry_count > 0) { 1263 int le; 1264 1265 /* 1266 * Only one error recovery action 1267 * at a time. See above. 1268 */ 1269 if (periph->flags & 1270 CAM_PERIPH_RECOVERY_INPROG) { 1271 error = ERESTART; 1272 break; 1273 } 1274 1275 periph->flags |= 1276 CAM_PERIPH_RECOVERY_INPROG; 1277 1278 /* decrement the number of retries */ 1279 retry = 1; 1280 ccb->ccb_h.retry_count--; 1281 1282 /* 1283 * Check for removable media and 1284 * set load/eject flag 1285 * appropriately. 1286 */ 1287 if (SID_IS_REMOVABLE(&cgd.inq_data)) 1288 le = TRUE; 1289 else 1290 le = FALSE; 1291 1292 /* 1293 * Attempt to start the drive up. 1294 * 1295 * Save the current ccb so it can 1296 * be restored and retried once the 1297 * drive is started up. 1298 */ 1299 bcopy(ccb, save_ccb, sizeof(*save_ccb)); 1300 1301 scsi_start_stop(&ccb->csio, 1302 /*retries*/1, 1303 camperiphdone, 1304 MSG_SIMPLE_Q_TAG, 1305 /*start*/TRUE, 1306 /*load/eject*/le, 1307 /*immediate*/FALSE, 1308 SSD_FULL_SIZE, 1309 /*timeout*/50000); 1310 /* 1311 * Drop the priority to 0 so that 1312 * we are the first to execute. Also 1313 * freeze the queue after this command 1314 * is sent so that we can restore the 1315 * old csio and have it queued in the 1316 * proper order before we let normal 1317 * transactions go to the drive. 1318 */ 1319 ccb->ccb_h.pinfo.priority = 0; 1320 ccb->ccb_h.flags |= CAM_DEV_QFREEZE; 1321 1322 /* 1323 * Save a pointer to the original 1324 * CCB in the new CCB. 1325 */ 1326 ccb->ccb_h.saved_ccb_ptr = save_ccb; 1327 1328 error = ERESTART; 1329 } else if ((sense_flags & SF_RETRY_UA) != 0) { 1330 /* 1331 * XXX KDM this is a *horrible* 1332 * hack. 1333 */ 1334 error = scsi_interpret_sense(ccb, 1335 sense_flags, 1336 &relsim_flags, 1337 &openings, 1338 &timeout, 1339 err_action); 1340 } 1341 1342 /* 1343 * Theoretically, this code should send a 1344 * test unit ready to the given device, and 1345 * if it returns and error, send a start 1346 * unit command. Since we don't yet have 1347 * the capability to do two-command error 1348 * recovery, just send a start unit. 1349 * XXX KDM fix this! 1350 */ 1351 else if (((err_action & SS_MASK) == SS_TURSTART) 1352 && save_ccb != NULL 1353 && ccb->ccb_h.retry_count > 0) { 1354 int le; 1355 1356 /* 1357 * Only one error recovery action 1358 * at a time. See above. 1359 */ 1360 if (periph->flags & 1361 CAM_PERIPH_RECOVERY_INPROG) { 1362 error = ERESTART; 1363 break; 1364 } 1365 1366 periph->flags |= 1367 CAM_PERIPH_RECOVERY_INPROG; 1368 1369 /* decrement the number of retries */ 1370 retry = 1; 1371 ccb->ccb_h.retry_count--; 1372 1373 /* 1374 * Check for removable media and 1375 * set load/eject flag 1376 * appropriately. 1377 */ 1378 if (SID_IS_REMOVABLE(&cgd.inq_data)) 1379 le = TRUE; 1380 else 1381 le = FALSE; 1382 1383 /* 1384 * Attempt to start the drive up. 1385 * 1386 * Save the current ccb so it can 1387 * be restored and retried once the 1388 * drive is started up. 1389 */ 1390 bcopy(ccb, save_ccb, sizeof(*save_ccb)); 1391 1392 scsi_start_stop(&ccb->csio, 1393 /*retries*/1, 1394 camperiphdone, 1395 MSG_SIMPLE_Q_TAG, 1396 /*start*/TRUE, 1397 /*load/eject*/le, 1398 /*immediate*/FALSE, 1399 SSD_FULL_SIZE, 1400 /*timeout*/50000); 1401 1402 /* release the queue after .5 sec. */ 1403 relsim_flags = 1404 RELSIM_RELEASE_AFTER_TIMEOUT; 1405 timeout = 500; 1406 /* 1407 * Drop the priority to 0 so that 1408 * we are the first to execute. Also 1409 * freeze the queue after this command 1410 * is sent so that we can restore the 1411 * old csio and have it queued in the 1412 * proper order before we let normal 1413 * transactions go to the drive. 1414 */ 1415 ccb->ccb_h.pinfo.priority = 0; 1416 ccb->ccb_h.flags |= CAM_DEV_QFREEZE; 1417 1418 /* 1419 * Save a pointer to the original 1420 * CCB in the new CCB. 1421 */ 1422 ccb->ccb_h.saved_ccb_ptr = save_ccb; 1423 1424 error = ERESTART; 1425 } else { 1426 error = scsi_interpret_sense(ccb, 1427 sense_flags, 1428 &relsim_flags, 1429 &openings, 1430 &timeout, 1431 err_action); 1432 } 1433 } else if (ccb->csio.scsi_status == 1434 SCSI_STATUS_CHECK_COND 1435 && status != CAM_AUTOSENSE_FAIL) { 1436 /* no point in decrementing the retry count */ 1437 panic("cam_periph_error: scsi status of " 1438 "CHECK COND returned but no sense " 1439 "information is availible. " 1440 "Controller should have returned " 1441 "CAM_AUTOSENSE_FAILED"); 1442 /* NOTREACHED */ 1443 error = EIO; 1444 } else if (ccb->ccb_h.retry_count == 0) { 1445 /* 1446 * XXX KDM shouldn't there be a better 1447 * argument to return?? 1448 */ 1449 error = EIO; 1450 } else { 1451 /* decrement the number of retries */ 1452 retry = ccb->ccb_h.retry_count > 0; 1453 if (retry) 1454 ccb->ccb_h.retry_count--; 1455 /* 1456 * If it was aborted with no 1457 * clue as to the reason, just 1458 * retry it again. 1459 */ 1460 error = ERESTART; 1461 } 1462 break; 1463 case SCSI_STATUS_QUEUE_FULL: 1464 { 1465 /* no decrement */ 1466 struct ccb_getdevstats cgds; 1467 1468 /* 1469 * First off, find out what the current 1470 * transaction counts are. 1471 */ 1472 xpt_setup_ccb(&cgds.ccb_h, 1473 ccb->ccb_h.path, 1474 /*priority*/1); 1475 cgds.ccb_h.func_code = XPT_GDEV_STATS; 1476 xpt_action((union ccb *)&cgds); 1477 1478 /* 1479 * If we were the only transaction active, treat 1480 * the QUEUE FULL as if it were a BUSY condition. 1481 */ 1482 if (cgds.dev_active != 0) { 1483 int total_openings; 1484 1485 /* 1486 * Reduce the number of openings to 1487 * be 1 less than the amount it took 1488 * to get a queue full bounded by the 1489 * minimum allowed tag count for this 1490 * device. 1491 */ 1492 total_openings = 1493 cgds.dev_active+cgds.dev_openings; 1494 openings = cgds.dev_active; 1495 if (openings < cgds.mintags) 1496 openings = cgds.mintags; 1497 if (openings < total_openings) 1498 relsim_flags = RELSIM_ADJUST_OPENINGS; 1499 else { 1500 /* 1501 * Some devices report queue full for 1502 * temporary resource shortages. For 1503 * this reason, we allow a minimum 1504 * tag count to be entered via a 1505 * quirk entry to prevent the queue 1506 * count on these devices from falling 1507 * to a pessimisticly low value. We 1508 * still wait for the next successful 1509 * completion, however, before queueing 1510 * more transactions to the device. 1511 */ 1512 relsim_flags = 1513 RELSIM_RELEASE_AFTER_CMDCMPLT; 1514 } 1515 timeout = 0; 1516 error = ERESTART; 1517 break; 1518 } 1519 /* FALLTHROUGH */ 1520 } 1521 case SCSI_STATUS_BUSY: 1522 /* 1523 * Restart the queue after either another 1524 * command completes or a 1 second timeout. 1525 * If we have any retries left, that is. 1526 */ 1527 retry = ccb->ccb_h.retry_count > 0; 1528 if (retry) { 1529 ccb->ccb_h.retry_count--; 1530 error = ERESTART; 1531 relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT 1532 | RELSIM_RELEASE_AFTER_CMDCMPLT; 1533 timeout = 1000; 1534 } else { 1535 error = EIO; 1536 } 1537 break; 1538 case SCSI_STATUS_RESERV_CONFLICT: 1539 error = EIO; 1540 break; 1541 default: 1542 error = EIO; 1543 break; 1544 } 1545 break; 1546 case CAM_REQ_CMP_ERR: 1547 case CAM_CMD_TIMEOUT: 1548 case CAM_UNEXP_BUSFREE: 1549 case CAM_UNCOR_PARITY: 1550 case CAM_DATA_RUN_ERR: 1551 /* decrement the number of retries */ 1552 retry = ccb->ccb_h.retry_count > 0; 1553 if (retry) { 1554 ccb->ccb_h.retry_count--; 1555 error = ERESTART; 1556 } else { 1557 error = EIO; 1558 } 1559 break; 1560 case CAM_UA_ABORT: 1561 case CAM_UA_TERMIO: 1562 case CAM_MSG_REJECT_REC: 1563 /* XXX Don't know that these are correct */ 1564 error = EIO; 1565 break; 1566 case CAM_SEL_TIMEOUT: 1567 { 1568 /* 1569 * XXX 1570 * A single selection timeout should not be enough 1571 * to invalidate a device. We should retry for multiple 1572 * seconds assuming this isn't a probe. We'll probably 1573 * need a special flag for that. 1574 */ 1575 #if 0 1576 struct cam_path *newpath; 1577 1578 /* Should we do more if we can't create the path?? */ 1579 if (xpt_create_path(&newpath, xpt_path_periph(ccb->ccb_h.path), 1580 xpt_path_path_id(ccb->ccb_h.path), 1581 xpt_path_target_id(ccb->ccb_h.path), 1582 CAM_LUN_WILDCARD) != CAM_REQ_CMP) 1583 break; 1584 /* 1585 * Let peripheral drivers know that this device has gone 1586 * away. 1587 */ 1588 xpt_async(AC_LOST_DEVICE, newpath, NULL); 1589 xpt_free_path(newpath); 1590 #endif 1591 if ((sense_flags & SF_RETRY_SELTO) != 0) { 1592 retry = ccb->ccb_h.retry_count > 0; 1593 if (retry) { 1594 ccb->ccb_h.retry_count--; 1595 error = ERESTART; 1596 /* 1597 * Wait half a second to give the device 1598 * time to recover before we try again. 1599 */ 1600 relsim_flags = RELSIM_RELEASE_AFTER_TIMEOUT; 1601 timeout = 500; 1602 } else { 1603 error = ENXIO; 1604 } 1605 } else { 1606 error = ENXIO; 1607 } 1608 break; 1609 } 1610 case CAM_REQ_INVALID: 1611 case CAM_PATH_INVALID: 1612 case CAM_DEV_NOT_THERE: 1613 case CAM_NO_HBA: 1614 case CAM_PROVIDE_FAIL: 1615 case CAM_REQ_TOO_BIG: 1616 error = EINVAL; 1617 break; 1618 case CAM_SCSI_BUS_RESET: 1619 case CAM_BDR_SENT: 1620 case CAM_REQUEUE_REQ: 1621 /* Unconditional requeue, dammit */ 1622 error = ERESTART; 1623 break; 1624 case CAM_RESRC_UNAVAIL: 1625 case CAM_BUSY: 1626 /* timeout??? */ 1627 default: 1628 /* decrement the number of retries */ 1629 retry = ccb->ccb_h.retry_count > 0; 1630 if (retry) { 1631 ccb->ccb_h.retry_count--; 1632 error = ERESTART; 1633 } else { 1634 /* Check the sense codes */ 1635 error = EIO; 1636 } 1637 break; 1638 } 1639 1640 /* Attempt a retry */ 1641 if (error == ERESTART || error == 0) { 1642 if (frozen != 0) 1643 ccb->ccb_h.status &= ~CAM_DEV_QFRZN; 1644 1645 if (error == ERESTART) 1646 xpt_action(ccb); 1647 1648 if (frozen != 0) { 1649 cam_release_devq(ccb->ccb_h.path, 1650 relsim_flags, 1651 openings, 1652 timeout, 1653 /*getcount_only*/0); 1654 } 1655 } 1656 1657 1658 return (error); 1659 } 1660