1 /* 2 * Copyright (c) 2004 3 * Joerg Sonnenberger <joerg@bec.de>. All rights reserved. 4 * 5 * Copyright (c) 1997, 1998-2003 6 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. All advertising materials mentioning features or use of this software 17 * must display the following acknowledgement: 18 * This product includes software developed by Bill Paul. 19 * 4. Neither the name of the author nor the names of any co-contributors 20 * may be used to endorse or promote products derived from this software 21 * without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 24 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 27 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 28 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 29 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 30 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 31 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 32 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 33 * THE POSSIBILITY OF SUCH DAMAGE. 34 * 35 * $FreeBSD: src/sys/pci/if_rlreg.h,v 1.42 2004/05/24 19:39:23 jhb Exp $ 36 * $DragonFly: src/sys/dev/netif/re/if_rereg.h,v 1.24 2008/10/19 06:00:24 sephe Exp $ 37 */ 38 39 /* 40 * RealTek 8129/8139 register offsets 41 */ 42 #define RE_IDR0 0x0000 /* ID register 0 (station addr) */ 43 #define RE_IDR1 0x0001 /* Must use 32-bit accesses (?) */ 44 #define RE_IDR2 0x0002 45 #define RE_IDR3 0x0003 46 #define RE_IDR4 0x0004 47 #define RE_IDR5 0x0005 48 /* 0006-0007 reserved */ 49 #define RE_MAR0 0x0008 /* Multicast hash table */ 50 #define RE_MAR1 0x0009 51 #define RE_MAR2 0x000A 52 #define RE_MAR3 0x000B 53 #define RE_MAR4 0x000C 54 #define RE_MAR5 0x000D 55 #define RE_MAR6 0x000E 56 #define RE_MAR7 0x000F 57 58 #define RE_RXADDR 0x0030 /* RX ring start address */ 59 #define RE_RX_EARLY_BYTES 0x0034 /* RX early byte count */ 60 #define RE_RX_EARLY_STAT 0x0036 /* RX early status */ 61 #define RE_COMMAND 0x0037 /* command register */ 62 #define RE_CURRXADDR 0x0038 /* current address of packet read */ 63 #define RE_CURRXBUF 0x003A /* current RX buffer address */ 64 #define RE_IMR 0x003C /* interrupt mask register */ 65 #define RE_ISR 0x003E /* interrupt status register */ 66 #define RE_TXCFG 0x0040 /* transmit config */ 67 #define RE_RXCFG 0x0044 /* receive config */ 68 #define RE_TIMERCNT 0x0048 /* timer count register */ 69 #define RE_MISSEDPKT 0x004C /* missed packet counter */ 70 #define RE_EECMD 0x0050 /* EEPROM command register */ 71 #define RE_CFG0 0x0051 /* config register #0 */ 72 #define RE_CFG1 0x0052 /* config register #1 */ 73 #define RE_CFG2 0x0053 /* config register #2 */ 74 /* 0054-0057 reserved */ 75 #define RE_MEDIASTAT 0x0058 /* media status register (8139) */ 76 /* 0059-005A reserved */ 77 #define RE_MII 0x005A /* 8129 chip only */ 78 #define RE_HALTCLK 0x005B 79 #define RE_MULTIINTR 0x005C /* multiple interrupt */ 80 #define RE_PCIREV 0x005E /* PCI revision value */ 81 /* 005F reserved */ 82 #define RE_TXSTAT_ALL 0x0060 /* TX status of all descriptors */ 83 84 /* Direct PHY access registers only available on 8139 */ 85 #define RE_BMCR 0x0062 /* PHY basic mode control */ 86 #define RE_BMSR 0x0064 /* PHY basic mode status */ 87 #define RE_ANAR 0x0066 /* PHY autoneg advert */ 88 #define RE_LPAR 0x0068 /* PHY link partner ability */ 89 #define RE_ANER 0x006A /* PHY autoneg expansion */ 90 91 #define RE_DISCCNT 0x006C /* disconnect counter */ 92 #define RE_FALSECAR 0x006E /* false carrier counter */ 93 #define RE_NWAYTST 0x0070 /* NWAY test register */ 94 #define RE_RX_ER 0x0072 /* RX_ER counter */ 95 #define RE_CSCFG 0x0074 /* CS configuration register */ 96 97 /* 98 * When operating in special C+ mode, some of the registers in an 99 * 8139C+ chip have different definitions. These are also used for 100 * the 8169 gigE chip. 101 */ 102 #define RE_DUMPSTATS_LO 0x0010 /* counter dump command register */ 103 #define RE_DUMPSTATS_HI 0x0014 /* counter dump command register */ 104 #define RE_TXLIST_ADDR_LO 0x0020 /* 64 bits, 256 byte alignment */ 105 #define RE_TXLIST_ADDR_HI 0x0024 /* 64 bits, 256 byte alignment */ 106 #define RE_TXLIST_ADDR_HPRIO_LO 0x0028 /* 64 bits, 256 byte alignment */ 107 #define RE_TXLIST_ADDR_HPRIO_HI 0x002C /* 64 bits, 256 byte alignment */ 108 #define RE_CFG2 0x0053 109 #define RE_TIMERINT 0x0054 /* interrupt on timer expire */ 110 #define RE_TXSTART 0x00D9 /* 8 bits */ 111 #define RE_CPLUS_CMD 0x00E0 /* 16 bits */ 112 #define RE_IM 0x00E2 /* 16 bits */ 113 #define RE_RXLIST_ADDR_LO 0x00E4 /* 64 bits, 256 byte alignment */ 114 #define RE_RXLIST_ADDR_HI 0x00E8 /* 64 bits, 256 byte alignment */ 115 #define RE_EARLY_TX_THRESH 0x00EC /* 8 bits */ 116 117 /* 118 * Registers specific to the 8169 gigE chip 119 */ 120 #define RE_TIMERINT_8169 0x0058 /* different offset than 8139 */ 121 #define RE_PHYAR 0x0060 122 #define RE_TBICSR 0x0064 123 #define RE_TBI_ANAR 0x0068 124 #define RE_TBI_LPAR 0x006A 125 #define RE_GMEDIASTAT 0x006C /* 8 bits */ 126 #define RE_MAXRXPKTLEN 0x00DA /* 16 bits, chip multiplies by 8 */ 127 #define RE_GTXSTART 0x0038 /* 16 bits */ 128 129 /* 130 * TX config register bits 131 */ 132 #define RE_TXCFG_CLRABRT 0x00000001 /* retransmit aborted pkt */ 133 #define RE_TXCFG_MAXDMA 0x00000700 /* max DMA burst size */ 134 #define RE_TXCFG_CRCAPPEND 0x00010000 /* CRC append (0 = yes) */ 135 #define RE_TXCFG_LOOPBKTST 0x00060000 /* loopback test */ 136 #define RE_TXCFG_IFG2 0x00080000 /* 8169 only */ 137 #define RE_TXCFG_IFG 0x03000000 /* interframe gap */ 138 #define RE_TXCFG_HWREV 0xFC800000 139 #define RE_TXCFG_MACMODE 0x00700000 140 141 /* 142 * Config 2 register bits 143 */ 144 #define RE_CFG2_PCICLK_MASK 0x07 145 #define RE_CFG2_PCICLK_33MHZ 0x00 146 #define RE_CFG2_PCICLK_66MHZ 0x01 147 #define RE_CFG2_PCI64 0x08 148 149 #define RE_LOOPTEST_OFF 0x00000000 150 #define RE_LOOPTEST_ON 0x00020000 151 #define RE_LOOPTEST_ON_CPLUS 0x00060000 152 153 #define RE_HWREV_8169 0x00000000 154 #define RE_HWREV_8110S 0x00800000 155 #define RE_HWREV_8169S 0x04000000 156 #define RE_HWREV_8169SB 0x10000000 157 #define RE_HWREV_8169SC1 0x18000000 158 #define RE_HWREV_8102EL 0x24800000 159 #define RE_HWREV_8168D 0x28000000 160 #define RE_HWREV_8168DP 0x28800000 161 #define RE_HWREV_8168E 0x2C000000 162 #define RE_HWREV_8168F 0x2C800000 163 #define RE_HWREV_8168B1 0x30000000 164 #define RE_HWREV_8100E 0x30800000 165 #define RE_HWREV_8101E1 0x34000000 166 #define RE_HWREV_8102E 0x34800000 167 #define RE_HWREV_8168B2 0x38000000 168 #define RE_HWREV_8168C 0x3C000000 169 #define RE_HWREV_8168CP 0x3C800000 170 #define RE_HWREV_8139CPLUS 0x74800000 171 #define RE_HWREV_8169SC2 0x98000000 172 #define RE_HWREV_8101E2 0xB4000000 173 #define RE_HWREV_8168B3 0xB8000000 174 #define RE_HWREV_NULL 0xffffffff 175 176 #define RE_TXDMA_16BYTES 0x00000000 177 #define RE_TXDMA_32BYTES 0x00000100 178 #define RE_TXDMA_64BYTES 0x00000200 179 #define RE_TXDMA_128BYTES 0x00000300 180 #define RE_TXDMA_256BYTES 0x00000400 181 #define RE_TXDMA_512BYTES 0x00000500 182 #define RE_TXDMA_1024BYTES 0x00000600 183 #define RE_TXDMA_2048BYTES 0x00000700 184 185 /* 186 * Transmit descriptor status register bits. 187 */ 188 #define RE_TXSTAT_LENMASK 0x00001FFF 189 #define RE_TXSTAT_OWN 0x00002000 190 #define RE_TXSTAT_TX_UNDERRUN 0x00004000 191 #define RE_TXSTAT_TX_OK 0x00008000 192 #define RE_TXSTAT_EARLY_THRESH 0x003F0000 193 #define RE_TXSTAT_COLLCNT 0x0F000000 194 #define RE_TXSTAT_CARR_HBEAT 0x10000000 195 #define RE_TXSTAT_OUTOFWIN 0x20000000 196 #define RE_TXSTAT_TXABRT 0x40000000 197 #define RE_TXSTAT_CARRLOSS 0x80000000 198 199 /* 200 * Interrupt status register bits. 201 */ 202 #define RE_ISR_RX_OK 0x0001 203 #define RE_ISR_RX_ERR 0x0002 204 #define RE_ISR_TX_OK 0x0004 205 #define RE_ISR_TX_ERR 0x0008 206 #define RE_ISR_RX_OVERRUN 0x0010 207 #define RE_ISR_LINKCHG 0x0020 /* 8169 only */ 208 #define RE_ISR_FIFO_OFLOW 0x0040 /* 8139 only */ 209 #define RE_ISR_TX_DESC_UNAVAIL 0x0080 /* C+ only */ 210 #define RE_ISR_SWI 0x0100 /* C+ only */ 211 #define RE_ISR_CABLE_LEN_CHGD 0x2000 212 #define RE_ISR_TIMEOUT_EXPIRED 0x4000 213 #define RE_ISR_SYSTEM_ERR 0x8000 214 215 #define RE_INTRS \ 216 (RE_ISR_RX_OK|RE_ISR_RX_ERR|RE_ISR_TX_ERR| \ 217 RE_ISR_RX_OVERRUN|RE_ISR_FIFO_OFLOW|RE_ISR_LINKCHG| \ 218 RE_ISR_SYSTEM_ERR|RE_ISR_TX_OK) 219 220 #define RE_INTRS_TIMER \ 221 (RE_ISR_RX_ERR|RE_ISR_TX_ERR| \ 222 RE_ISR_LINKCHG|RE_ISR_SYSTEM_ERR| \ 223 RE_ISR_TIMEOUT_EXPIRED) 224 225 #ifdef RE_DIAG 226 #define RE_INTRS_DIAG \ 227 (RE_ISR_TX_OK|RE_ISR_RX_OK|RE_ISR_RX_ERR|RE_ISR_TX_ERR| \ 228 RE_ISR_RX_OVERRUN|RE_ISR_FIFO_OFLOW|RE_ISR_LINKCHG| \ 229 RE_ISR_SYSTEM_ERR) 230 #endif 231 232 /* 233 * Media status register. (8139 only) 234 */ 235 #define RE_MEDIASTAT_RXPAUSE 0x01 236 #define RE_MEDIASTAT_TXPAUSE 0x02 237 #define RE_MEDIASTAT_LINK 0x04 238 #define RE_MEDIASTAT_SPEED10 0x08 239 #define RE_MEDIASTAT_RXFLOWCTL 0x40 /* duplex mode */ 240 #define RE_MEDIASTAT_TXFLOWCTL 0x80 /* duplex mode */ 241 242 /* 243 * Receive config register. 244 */ 245 #define RE_RXCFG_RX_ALLPHYS 0x00000001 /* accept all nodes */ 246 #define RE_RXCFG_RX_INDIV 0x00000002 /* match filter */ 247 #define RE_RXCFG_RX_MULTI 0x00000004 /* accept all multicast */ 248 #define RE_RXCFG_RX_BROAD 0x00000008 /* accept all broadcast */ 249 #define RE_RXCFG_RX_RUNT 0x00000010 250 #define RE_RXCFG_RX_ERRPKT 0x00000020 251 #define RE_RXCFG_WRAP 0x00000080 252 #define RE_RXCFG_MAXDMA 0x00000700 253 #define RE_RXCFG_BUFSZ 0x00001800 254 #define RE_RXCFG_FIFOTHRESH 0x0000E000 255 #define RE_RXCFG_EARLYTHRESH 0x07000000 256 257 #define RE_RXDMA_16BYTES 0x00000000 258 #define RE_RXDMA_32BYTES 0x00000100 259 #define RE_RXDMA_64BYTES 0x00000200 260 #define RE_RXDMA_128BYTES 0x00000300 261 #define RE_RXDMA_256BYTES 0x00000400 262 #define RE_RXDMA_512BYTES 0x00000500 263 #define RE_RXDMA_1024BYTES 0x00000600 264 #define RE_RXDMA_UNLIMITED 0x00000700 265 266 #define RE_RXBUF_8 0x00000000 267 #define RE_RXBUF_16 0x00000800 268 #define RE_RXBUF_32 0x00001000 269 #define RE_RXBUF_64 0x00001800 270 271 #define RE_RXFIFO_16BYTES 0x00000000 272 #define RE_RXFIFO_32BYTES 0x00002000 273 #define RE_RXFIFO_64BYTES 0x00004000 274 #define RE_RXFIFO_128BYTES 0x00006000 275 #define RE_RXFIFO_256BYTES 0x00008000 276 #define RE_RXFIFO_512BYTES 0x0000A000 277 #define RE_RXFIFO_1024BYTES 0x0000C000 278 #define RE_RXFIFO_NOTHRESH 0x0000E000 279 280 /* 281 * Bits in RX status header (included with RX'ed packet 282 * in ring buffer). 283 */ 284 #define RE_RXSTAT_RXOK 0x00000001 285 #define RE_RXSTAT_ALIGNERR 0x00000002 286 #define RE_RXSTAT_CRCERR 0x00000004 287 #define RE_RXSTAT_GIANT 0x00000008 288 #define RE_RXSTAT_RUNT 0x00000010 289 #define RE_RXSTAT_BADSYM 0x00000020 290 #define RE_RXSTAT_BROAD 0x00002000 291 #define RE_RXSTAT_INDIV 0x00004000 292 #define RE_RXSTAT_MULTI 0x00008000 293 #define RE_RXSTAT_LENMASK 0xFFFF0000 294 295 #define RE_RXSTAT_UNFINISHED 0xFFF0 /* DMA still in progress */ 296 /* 297 * Command register. 298 */ 299 #define RE_CMD_EMPTY_RXBUF 0x0001 300 #define RE_CMD_TX_ENB 0x0004 301 #define RE_CMD_RX_ENB 0x0008 302 #define RE_CMD_RESET 0x0010 303 #define RE_CMD_STOPREQ 0x0080 304 305 /* 306 * EEPROM control register 307 */ 308 #define RE_EE_DATAOUT 0x01 /* Data out */ 309 #define RE_EE_DATAIN 0x02 /* Data in */ 310 #define RE_EE_CLK 0x04 /* clock */ 311 #define RE_EE_SEL 0x08 /* chip select */ 312 #define RE_EE_MODE (0x40|0x80) 313 314 #define RE_EEMODE_OFF 0x00 315 #define RE_EEMODE_AUTOLOAD 0x40 316 #define RE_EEMODE_PROGRAM 0x80 317 #define RE_EEMODE_WRITECFG (0x80|0x40) 318 319 /* 9346 EEPROM commands */ 320 #define RE_9346_READ 0x6 321 #define RE_EECMD_WRITE 0x140 322 #define RE_EECMD_READ_6BIT 0x180 323 #define RE_EECMD_READ_8BIT 0x600 324 #define RE_EECMD_ERASE 0x1c0 325 326 #define RE_EE_ID 0x00 327 #define RE_EE_PCI_VID 0x01 328 #define RE_EE_PCI_DID 0x02 329 /* Location of station address inside EEPROM */ 330 #define RE_EE_EADDR0 0x07 331 #define RE_EE_EADDR1 0x01 332 333 /* 334 * Config 0 register 335 */ 336 #define RE_CFG0_ROM0 0x01 337 #define RE_CFG0_ROM1 0x02 338 #define RE_CFG0_ROM2 0x04 339 #define RE_CFG0_PL0 0x08 340 #define RE_CFG0_PL1 0x10 341 #define RE_CFG0_10MBPS 0x20 /* 10 Mbps internal mode */ 342 #define RE_CFG0_PCS 0x40 343 #define RE_CFG0_SCR 0x80 344 345 /* 346 * Config 1 register 347 */ 348 #define RE_CFG1_PWRDWN 0x01 349 #define RE_CFG1_SLEEP 0x02 350 #define RE_CFG1_IOMAP 0x04 351 #define RE_CFG1_MEMMAP 0x08 352 #define RE_CFG1_RSVD 0x10 353 #define RE_CFG1_DRVLOAD 0x20 354 #define RE_CFG1_LED0 0x40 355 #define RE_CFG1_FULLDUPLEX 0x40 /* 8129 only */ 356 #define RE_CFG1_LED1 0x80 357 358 /* 359 * 8139C+ register definitions 360 */ 361 362 /* RE_DUMPSTATS_LO register */ 363 364 #define RE_DUMPSTATS_START 0x00000008 365 366 /* Transmit start register */ 367 368 #define RE_TXSTART_SWI 0x01 /* generate TX interrupt */ 369 #define RE_TXSTART_START 0x40 /* start normal queue transmit */ 370 #define RE_TXSTART_HPRIO_START 0x80 /* start hi prio queue transmit */ 371 372 /* 373 * Config 2 register, 8139C+/8169/8169S/8110S only 374 */ 375 #define RE_CFG2_BUSFREQ 0x07 376 #define RE_CFG2_BUSWIDTH 0x08 377 #define RE_CFG2_AUXPWRSTS 0x10 378 379 #define RE_BUSFREQ_33MHZ 0x00 380 #define RE_BUSFREQ_66MHZ 0x01 381 382 #define RE_BUSWIDTH_32BITS 0x00 383 #define RE_BUSWIDTH_64BITS 0x08 384 385 /* C+ mode command register */ 386 387 #define RE_CPLUSCMD_TXENB 0x0001 /* enable C+ transmit mode */ 388 #define RE_CPLUSCMD_RXENB 0x0002 /* enable C+ receive mode */ 389 #define RE_CPLUSCMD_PCI_MRW 0x0008 /* enable PCI multi-read/write */ 390 #define RE_CPLUSCMD_PCI_DAC 0x0010 /* PCI dual-address cycle only */ 391 #define RE_CPLUSCMD_RXCSUM_ENB 0x0020 /* enable RX checksum offload */ 392 #define RE_CPLUSCMD_VLANSTRIP 0x0040 /* enable VLAN tag stripping */ 393 394 /* C+ early transmit threshold */ 395 396 #define RE_EARLYTXTHRESH_CNT 0x003F /* byte count times 8 */ 397 398 /* 399 * Gigabit PHY access register (8169 only) 400 */ 401 402 #define RE_PHYAR_PHYDATA 0x0000FFFF 403 #define RE_PHYAR_PHYREG 0x001F0000 404 #define RE_PHYAR_BUSY 0x80000000 405 406 /* 407 * Gigabit media status (8169 only) 408 */ 409 #define RE_GMEDIASTAT_FDX 0x01 /* full duplex */ 410 #define RE_GMEDIASTAT_LINK 0x02 /* link up */ 411 #define RE_GMEDIASTAT_10MBPS 0x04 /* 10mps link */ 412 #define RE_GMEDIASTAT_100MBPS 0x08 /* 100mbps link */ 413 #define RE_GMEDIASTAT_1000MBPS 0x10 /* gigE link */ 414 #define RE_GMEDIASTAT_RXFLOW 0x20 /* RX flow control on */ 415 #define RE_GMEDIASTAT_TXFLOW 0x40 /* TX flow control on */ 416 #define RE_GMEDIASTAT_TBI 0x80 /* TBI enabled */ 417 418 /* 419 * The RealTek doesn't use a fragment-based descriptor mechanism. 420 * Instead, there are only four register sets, each or which represents 421 * one 'descriptor.' Basically, each TX descriptor is just a contiguous 422 * packet buffer (32-bit aligned!) and we place the buffer addresses in 423 * the registers so the chip knows where they are. 424 * 425 * We can sort of kludge together the same kind of buffer management 426 * used in previous drivers, but we have to do buffer copies almost all 427 * the time, so it doesn't really buy us much. 428 * 429 * For reception, there's just one large buffer where the chip stores 430 * all received packets. 431 */ 432 433 #define RE_RX_BUF_SZ RE_RXBUF_64 434 #define RE_RXBUFLEN (1 << ((RE_RX_BUF_SZ >> 11) + 13)) 435 #define RE_TX_LIST_CNT 4 436 #define RE_MIN_FRAMELEN 60 437 #define RE_TXTHRESH(x) ((x) << 11) 438 #define RE_TX_THRESH_INIT 96 439 #define RE_RX_FIFOTHRESH RE_RXFIFO_NOTHRESH 440 #define RE_RX_MAXDMA RE_RXDMA_UNLIMITED 441 #define RE_TX_MAXDMA RE_TXDMA_2048BYTES 442 443 #define RE_RXCFG_CONFIG (RE_RX_FIFOTHRESH|RE_RX_MAXDMA|RE_RX_BUF_SZ) 444 #define RE_TXCFG_CONFIG (RE_TXCFG_IFG|RE_TX_MAXDMA) 445 446 #define RE_IM_MAGIC 0x5050 447 #define RE_IM_RXTIME(t) ((t) & 0xf) 448 #define RE_IM_TXTIME(t) (((t) & 0xf) << 8) 449 450 #if 0 451 struct re_mii_frame { 452 uint8_t mii_stdelim; 453 uint8_t mii_opcode; 454 uint8_t mii_phyaddr; 455 uint8_t mii_regaddr; 456 uint8_t mii_turnaround; 457 uint16_t mii_data; 458 }; 459 #endif 460 461 /* 462 * MII constants 463 */ 464 #define RE_MII_STARTDELIM 0x01 465 #define RE_MII_READOP 0x02 466 #define RE_MII_WRITEOP 0x01 467 #define RE_MII_TURNAROUND 0x02 468 469 /* 470 * The 8139C+ and 8160 gigE chips support descriptor-based TX 471 * and RX. In fact, they even support TCP large send. Descriptors 472 * must be allocated in contiguous blocks that are aligned on a 473 * 256-byte boundary. The rings can hold a maximum of 64 descriptors. 474 */ 475 476 /* 477 * RX/TX descriptor definition. When large send mode is enabled, the 478 * lower 11 bits of the TX re_cmd word are used to hold the MSS, and 479 * the checksum offload bits are disabled. The structure layout is 480 * the same for RX and TX descriptors 481 */ 482 483 struct re_desc { 484 uint32_t re_cmdstat; 485 uint32_t re_control; 486 uint32_t re_bufaddr_lo; 487 uint32_t re_bufaddr_hi; 488 }; 489 490 #define RE_TDESC_CMD_FRAGLEN 0x0000FFFF 491 #define RE_TDESC_CMD_TCPCSUM 0x00010000 /* TCP checksum enable */ 492 #define RE_TDESC_CMD_UDPCSUM 0x00020000 /* UDP checksum enable */ 493 #define RE_TDESC_CMD_IPCSUM 0x00040000 /* IP header checksum enable */ 494 #define RE_TDESC_CMD_MSSVAL 0x07FF0000 /* Large send MSS value */ 495 #define RE_TDESC_CMD_LGSEND 0x08000000 /* TCP large send enb */ 496 #define RE_TDESC_CMD_EOF 0x10000000 /* end of frame marker */ 497 #define RE_TDESC_CMD_SOF 0x20000000 /* start of frame marker */ 498 #define RE_TDESC_CMD_EOR 0x40000000 /* end of ring marker */ 499 #define RE_TDESC_CMD_OWN 0x80000000 /* chip owns descriptor */ 500 501 #define RE_TDESC_CTL_INSTAG 0x00020000 /* Insert VLAN tag */ 502 #define RE_TDESC_CTL_TAGDATA 0x0000FFFF /* TAG data */ 503 #define RE_TDESC_CTL_IPCSUM 0x20000000 /* IP header csum, MAC2 only */ 504 #define RE_TDESC_CTL_TCPCSUM 0x60000000 /* TCP csum, MAC2 only */ 505 #define RE_TDESC_CTL_UDPCSUM 0xa0000000 /* UDP csum, MAC2 only */ 506 507 /* 508 * Error bits are valid only on the last descriptor of a frame 509 * (i.e. RE_TDESC_CMD_EOF == 1) 510 */ 511 512 #define RE_TDESC_STAT_COLCNT 0x000F0000 /* collision count */ 513 #define RE_TDESC_STAT_EXCESSCOL 0x00100000 /* excessive collisions */ 514 #define RE_TDESC_STAT_LINKFAIL 0x00200000 /* link faulure */ 515 #define RE_TDESC_STAT_OWINCOL 0x00400000 /* out-of-window collision */ 516 #define RE_TDESC_STAT_TXERRSUM 0x00800000 /* transmit error summary */ 517 #define RE_TDESC_STAT_UNDERRUN 0x02000000 /* TX underrun occured */ 518 #define RE_TDESC_STAT_OWN 0x80000000 519 520 /* 521 * RX descriptor cmd/vlan definitions 522 */ 523 524 #define RE_RDESC_CMD_EOR 0x40000000 525 #define RE_RDESC_CMD_OWN 0x80000000 526 #define RE_RDESC_CMD_BUFLEN 0x00001FFF 527 528 #define RE_RDESC_STAT_OWN 0x80000000 529 #define RE_RDESC_STAT_EOR 0x40000000 530 #define RE_RDESC_STAT_SOF 0x20000000 531 #define RE_RDESC_STAT_EOF 0x10000000 532 #define RE_RDESC_STAT_FRALIGN 0x08000000 /* frame alignment error */ 533 #define RE_RDESC_STAT_MCAST 0x04000000 /* multicast pkt received */ 534 #define RE_RDESC_STAT_UCAST 0x02000000 /* unicast pkt received */ 535 #define RE_RDESC_STAT_BCAST 0x01000000 /* broadcast pkt received */ 536 #define RE_RDESC_STAT_BUFOFLOW 0x00800000 /* out of buffer space */ 537 #define RE_RDESC_STAT_FIFOOFLOW 0x00400000 /* FIFO overrun */ 538 #define RE_RDESC_STAT_GIANT 0x00200000 /* pkt > 4096 bytes */ 539 #define RE_RDESC_STAT_RXERRSUM 0x00100000 /* RX error summary */ 540 #define RE_RDESC_STAT_RUNT 0x00080000 /* runt packet received */ 541 #define RE_RDESC_STAT_CRCERR 0x00040000 /* CRC error */ 542 #define RE_RDESC_STAT_PROTOID 0x00030000 /* Protocol type */ 543 #define RE_RDESC_STAT_IPSUMBAD 0x00008000 /* IP header checksum bad */ 544 #define RE_RDESC_STAT_UDPSUMBAD 0x00004000 /* UDP checksum bad */ 545 #define RE_RDESC_STAT_TCPSUMBAD 0x00002000 /* TCP checksum bad */ 546 #define RE_RDESC_STAT_FRAGLEN 0x00001FFF /* RX'ed frame/frag len */ 547 #define RE_RDESC_STAT_GFRAGLEN 0x00003FFF /* RX'ed frame/frag len */ 548 549 #define RE_RDESC_CTL_HASTAG 0x00010000 /* VLAN tag available 550 (TAG data valid) */ 551 #define RE_RDESC_CTL_TAGDATA 0x0000FFFF /* TAG data */ 552 #define RE_RDESC_CTL_PROTOIP4 0x40000000 /* IPv4 packet, MAC2 only */ 553 #define RE_RDESC_CTL_PROTOIP6 0x80000000 /* IPv6 packet, MAC2 only */ 554 555 #define RE_PROTOID_NONIP 0x00000000 556 #define RE_PROTOID_TCPIP 0x00010000 557 #define RE_PROTOID_UDPIP 0x00020000 558 #define RE_PROTOID_IP 0x00030000 559 #define RE_TCPPKT(x) (((x) & RE_RDESC_STAT_PROTOID) == \ 560 RE_PROTOID_TCPIP) 561 #define RE_UDPPKT(x) (((x) & RE_RDESC_STAT_PROTOID) == \ 562 RE_PROTOID_UDPIP) 563 564 /* 565 * Statistics counter structure (8139C+ and 8169 only) 566 */ 567 struct re_stats { 568 uint32_t re_tx_pkts_lo; 569 uint32_t re_tx_pkts_hi; 570 uint32_t re_tx_errs_lo; 571 uint32_t re_tx_errs_hi; 572 uint32_t re_tx_errs; 573 uint16_t re_missed_pkts; 574 uint16_t re_rx_framealign_errs; 575 uint32_t re_tx_onecoll; 576 uint32_t re_tx_multicolls; 577 uint32_t re_rx_ucasts_hi; 578 uint32_t re_rx_ucasts_lo; 579 uint32_t re_rx_bcasts_lo; 580 uint32_t re_rx_bcasts_hi; 581 uint32_t re_rx_mcasts; 582 uint16_t re_tx_aborts; 583 uint16_t re_rx_underruns; 584 }; 585 586 /* 587 * General constants that are fun to know. 588 * 589 * PCI low memory base and low I/O base register, and 590 * other PCI registers. 591 */ 592 593 #define RE_PCI_LOMEM 0x14 594 #define RE_PCI_LOIO 0x10 595 596 #define PCI_SUBDEVICE_LINKSYS_EG1032_REV3 0x0024 597 #define PCI_REVID_REALTEK_RT8139CP 0x20 598