xref: /freebsd/contrib/bearssl/src/ssl/ssl_lru.c (revision 0957b409)

/*
 * Copyright (c) 2016 Thomas Pornin <pornin@bolet.org>
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#include "inner.h"

/*
 * Each entry consists in a fixed number of bytes. Entries are concatenated
 * in the store block. "Addresses" are really offsets in the block,
 * expressed over 32 bits (so the cache may have size at most 4 GB, which
 * "ought to be enough for everyone"). The "null address" is 0xFFFFFFFF.
 * Note that since the storage block alignment is in no way guaranteed, we
 * perform only accesses that can handle unaligned data.
 *
 * Two concurrent data structures are maintained:
 *
 * -- Entries are organised in a doubly-linked list; saved entries are added
 * at the head, and loaded entries are moved to the head. Eviction uses
 * the list tail (this is the LRU algorithm).
 *
 * -- Entries are indexed with a binary tree: all left descendants of a
 * node have a lower session ID (in lexicographic order), while all
 * right descendants have a higher session ID. The tree is heuristically
 * balanced.
 *
 * Entry format:
 *
 *   session ID          32 bytes
 *   master secret       48 bytes
 *   protocol version    2 bytes (big endian)
 *   cipher suite        2 bytes (big endian)
 *   list prev           4 bytes (big endian)
 *   list next           4 bytes (big endian)
 *   tree left child     4 bytes (big endian)
 *   tree right child    4 bytes (big endian)
 *
 * If an entry has a protocol version set to 0, then it is "disabled":
 * it was a session pushed to the cache at some point, but it has
 * been explicitly removed.
 *
 * We need to keep the tree balanced because an attacker could make
 * handshakes, selecting some specific sessions (by reusing them) to
 * try to make us make an imbalanced tree that makes lookups expensive
 * (a denial-of-service attack that would persist as long as the cache
 * remains, i.e. even after the attacker made all his connections).
 * To do that, we replace the session ID (or the start of the session ID)
 * with a HMAC value computed over the replaced part; the hash function
 * implementation and the key are obtained from the server context upon
 * first save() call.
 *
 * Theoretically, an attacker could use the exact timing of the lookup
 * to infer the current tree topology, and try to revive entries to make
 * it as unbalanced as possible. However, since the session ID are
 * chosen randomly by the server, and the attacker cannot see the
 * indexing values and must thus rely on blind selection, it should be
 * exponentially difficult for the attacker to maintain a large
 * imbalance.
 */
#define SESSION_ID_LEN       32
#define MASTER_SECRET_LEN    48

#define SESSION_ID_OFF        0
#define MASTER_SECRET_OFF    32
#define VERSION_OFF          80
#define CIPHER_SUITE_OFF     82
#define LIST_PREV_OFF        84
#define LIST_NEXT_OFF        88
#define TREE_LEFT_OFF        92
#define TREE_RIGHT_OFF       96

#define LRU_ENTRY_LEN       100

#define ADDR_NULL   ((uint32_t)-1)

#define GETSET(name, off) \
static inline uint32_t get_ ## name(br_ssl_session_cache_lru *cc, uint32_t x) \
{ \
	return br_dec32be(cc->store + x + (off)); \
} \
static inline void set_ ## name(br_ssl_session_cache_lru *cc, \
	uint32_t x, uint32_t val) \
{ \
	br_enc32be(cc->store + x + (off), val); \
}

GETSET(prev, LIST_PREV_OFF)
GETSET(next, LIST_NEXT_OFF)
GETSET(left, TREE_LEFT_OFF)
GETSET(right, TREE_RIGHT_OFF)

/*
 * Transform the session ID by replacing the first N bytes with a HMAC
 * value computed over these bytes, using the random key K (the HMAC
 * value is truncated if needed). HMAC will use the same hash function
 * as the DRBG in the SSL server context, so with SHA-256, SHA-384,
 * or SHA-1, depending on what is available.
 *
 * The risk of collision is considered too small to be a concern; and
 * the impact of a collision is low (the handshake won't succeed). This
 * risk is much lower than any transmission error, which would lead to
 * the same consequences.
 *
 * Source and destination arrays msut be disjoint.
 */
static void
mask_id(br_ssl_session_cache_lru *cc,
	const unsigned char *src, unsigned char *dst)
{
	br_hmac_key_context hkc;
	br_hmac_context hc;

	memcpy(dst, src, SESSION_ID_LEN);
	br_hmac_key_init(&hkc, cc->hash, cc->index_key, sizeof cc->index_key);
	br_hmac_init(&hc, &hkc, SESSION_ID_LEN);
	br_hmac_update(&hc, src, SESSION_ID_LEN);
	br_hmac_out(&hc, dst);
}

/*
 * Find a node by ID. Returned value is the node address, or ADDR_NULL if
 * the node is not found.
 *
 * If addr_link is not NULL, then '*addr_link' is set to the address of the
 * last followed link. If the found node is the root, or if the tree is
 * empty, then '*addr_link' is set to ADDR_NULL.
 */
static uint32_t
find_node(br_ssl_session_cache_lru *cc, const unsigned char *id,
	uint32_t *addr_link)
{
	uint32_t x, y;

	x = cc->root;
	y = ADDR_NULL;
	while (x != ADDR_NULL) {
		int r;

		r = memcmp(id, cc->store + x + SESSION_ID_OFF, SESSION_ID_LEN);
		if (r < 0) {
			y = x + TREE_LEFT_OFF;
			x = get_left(cc, x);
		} else if (r == 0) {
			if (addr_link != NULL) {
				*addr_link = y;
			}
			return x;
		} else {
			y = x + TREE_RIGHT_OFF;
			x = get_right(cc, x);
		}
	}
	if (addr_link != NULL) {
		*addr_link = y;
	}
	return ADDR_NULL;
}

/*
 * For node x, find its replacement upon removal.
 *
 *  -- If node x has no child, then this returns ADDR_NULL.
 *  -- Otherwise, if node x has a left child, then the replacement is the
 *     rightmost left-descendent.
 *  -- Otherwise, the replacement is the leftmost right-descendent.
 *
 * If a node is returned, then '*al' is set to the address of the field
 * that points to that node. Otherwise (node x has no child), '*al' is
 * set to ADDR_NULL.
 *
 * Note that the replacement node, when found, is always a descendent
 * of node 'x', so it cannot be the tree root. Thus, '*al' can be set
 * to ADDR_NULL only when no node is found and ADDR_NULL is returned.
 */
static uint32_t
find_replacement_node(br_ssl_session_cache_lru *cc, uint32_t x, uint32_t *al)
{
	uint32_t y1, y2;

	y1 = get_left(cc, x);
	if (y1 != ADDR_NULL) {
		y2 = x + TREE_LEFT_OFF;
		for (;;) {
			uint32_t z;

			z = get_right(cc, y1);
			if (z == ADDR_NULL) {
				*al = y2;
				return y1;
			}
			y2 = y1 + TREE_RIGHT_OFF;
			y1 = z;
		}
	}
	y1 = get_right(cc, x);
	if (y1 != ADDR_NULL) {
		y2 = x + TREE_RIGHT_OFF;
		for (;;) {
			uint32_t z;

			z = get_left(cc, y1);
			if (z == ADDR_NULL) {
				*al = y2;
				return y1;
			}
			y2 = y1 + TREE_LEFT_OFF;
			y1 = z;
		}
	}
	*al = ADDR_NULL;
	return ADDR_NULL;
}

/*
 * Set the link at address 'alx' to point to node 'x'. If 'alx' is
 * ADDR_NULL, then this sets the tree root to 'x'.
 */
static inline void
set_link(br_ssl_session_cache_lru *cc, uint32_t alx, uint32_t x)
{
	if (alx == ADDR_NULL) {
		cc->root = x;
	} else {
		br_enc32be(cc->store + alx, x);
	}
}

/*
 * Remove node 'x' from the tree. This function shall not be called if
 * node 'x' is not part of the tree.
 */
static void
remove_node(br_ssl_session_cache_lru *cc, uint32_t x)
{
	uint32_t alx, y, aly;

	/*
	 * Removal algorithm:
	 * ------------------
	 *
	 * - If we remove the root, then the tree becomes empty.
	 *
	 * - If the removed node has no child, then we can simply remove
	 *   it, with nothing else to do.
	 *
	 * - Otherwise, the removed node must be replaced by either its
	 *   rightmost left-descendent, or its leftmost right-descendent.
	 *   The replacement node itself must be removed from its current
	 *   place. By definition, that replacement node has either no
	 *   child, or at most a single child that will replace it in the
	 *   tree.
	 */

	/*
	 * Find node back and its ancestor link. If the node was the
	 * root, then alx is set to ADDR_NULL.
	 */
	find_node(cc, cc->store + x + SESSION_ID_OFF, &alx);

	/*
	 * Find replacement node 'y', and 'aly' is set to the address of
	 * the link to that replacement node. If the removed node has no
	 * child, then both 'y' and 'aly' are set to ADDR_NULL.
	 */
	y = find_replacement_node(cc, x, &aly);

	if (y != ADDR_NULL) {
		uint32_t z;

		/*
		 * The unlinked replacement node may have one child (but
		 * not two) that takes its place.
		 */
		z = get_left(cc, y);
		if (z == ADDR_NULL) {
			z = get_right(cc, y);
		}
		set_link(cc, aly, z);

		/*
		 * Link the replacement node in its new place, overwriting
		 * the current link to the node 'x' (which removes 'x').
		 */
		set_link(cc, alx, y);

		/*
		 * The replacement node adopts the left and right children
		 * of the removed node. Note that this also works even if
		 * the replacement node was a direct descendent of the
		 * removed node, since we unlinked it previously.
		 */
		set_left(cc, y, get_left(cc, x));
		set_right(cc, y, get_right(cc, x));
	} else {
		/*
		 * No replacement, we simply unlink the node 'x'.
		 */
		set_link(cc, alx, ADDR_NULL);
	}
}

static void
lru_save(const br_ssl_session_cache_class **ctx,
	br_ssl_server_context *server_ctx,
	const br_ssl_session_parameters *params)
{
	br_ssl_session_cache_lru *cc;
	unsigned char id[SESSION_ID_LEN];
	uint32_t x, alx;

	cc = (br_ssl_session_cache_lru *)ctx;

	/*
	 * If the buffer is too small, we don't record anything. This
	 * test avoids problems in subsequent code.
	 */
	if (cc->store_len < LRU_ENTRY_LEN) {
		return;
	}

	/*
	 * Upon the first save in a session cache instance, we obtain
	 * a random key for our indexing.
	 */
	if (!cc->init_done) {
		br_hmac_drbg_generate(&server_ctx->eng.rng,
			cc->index_key, sizeof cc->index_key);
		cc->hash = br_hmac_drbg_get_hash(&server_ctx->eng.rng);
		cc->init_done = 1;
	}
	mask_id(cc, params->session_id, id);

	/*
	 * Look for the node in the tree. If the same ID is already used,
	 * then reject it. This is a collision event, which should be
	 * exceedingly rare.
	 * Note: we do NOT record the emplacement here, because the
	 * removal of an entry may change the tree topology.
	 */
	if (find_node(cc, id, NULL) != ADDR_NULL) {
		return;
	}

	/*
	 * Find some room for the new parameters. If the cache is not
	 * full yet, add it to the end of the area and bump the pointer up.
	 * Otherwise, evict the list tail entry. Note that we already
	 * filtered out the case of a ridiculously small buffer that
	 * cannot hold any entry at all; thus, if there is no room for an
	 * extra entry, then the cache cannot be empty.
	 */
	if (cc->store_ptr > (cc->store_len - LRU_ENTRY_LEN)) {
		/*
		 * Evict tail. If the buffer has room for a single entry,
		 * then this may also be the head.
		 */
		x = cc->tail;
		cc->tail = get_prev(cc, x);
		if (cc->tail == ADDR_NULL) {
			cc->head = ADDR_NULL;
		} else {
			set_next(cc, cc->tail, ADDR_NULL);
		}

		/*
		 * Remove the node from the tree.
		 */
		remove_node(cc, x);
	} else {
		/*
		 * Allocate room for new node.
		 */
		x = cc->store_ptr;
		cc->store_ptr += LRU_ENTRY_LEN;
	}

	/*
	 * Find the emplacement for the new node, and link it.
	 */
	find_node(cc, id, &alx);
	set_link(cc, alx, x);
	set_left(cc, x, ADDR_NULL);
	set_right(cc, x, ADDR_NULL);

	/*
	 * New entry becomes new list head. It may also become the list
	 * tail if the cache was empty at that point.
	 */
	if (cc->head == ADDR_NULL) {
		cc->tail = x;
	} else {
		set_prev(cc, cc->head, x);
	}
	set_prev(cc, x, ADDR_NULL);
	set_next(cc, x, cc->head);
	cc->head = x;

	/*
	 * Fill data in the entry.
	 */
	memcpy(cc->store + x + SESSION_ID_OFF, id, SESSION_ID_LEN);
	memcpy(cc->store + x + MASTER_SECRET_OFF,
		params->master_secret, MASTER_SECRET_LEN);
	br_enc16be(cc->store + x + VERSION_OFF, params->version);
	br_enc16be(cc->store + x + CIPHER_SUITE_OFF, params->cipher_suite);
}

static int
lru_load(const br_ssl_session_cache_class **ctx,
	br_ssl_server_context *server_ctx,
	br_ssl_session_parameters *params)
{
	br_ssl_session_cache_lru *cc;
	unsigned char id[SESSION_ID_LEN];
	uint32_t x;

	(void)server_ctx;
	cc = (br_ssl_session_cache_lru *)ctx;
	if (!cc->init_done) {
		return 0;
	}
	mask_id(cc, params->session_id, id);
	x = find_node(cc, id, NULL);
	if (x != ADDR_NULL) {
		unsigned version;

		version = br_dec16be(cc->store + x + VERSION_OFF);
		if (version == 0) {
			/*
			 * Entry is disabled, we pretend we did not find it.
			 * Notably, we don't move it to the front of the
			 * LRU list.
			 */
			return 0;
		}
		params->version = version;
		params->cipher_suite = br_dec16be(
			cc->store + x + CIPHER_SUITE_OFF);
		memcpy(params->master_secret,
			cc->store + x + MASTER_SECRET_OFF,
			MASTER_SECRET_LEN);
		if (x != cc->head) {
			/*
			 * Found node is not at list head, so move
			 * it to the head.
			 */
			uint32_t p, n;

			p = get_prev(cc, x);
			n = get_next(cc, x);
			set_next(cc, p, n);
			if (n == ADDR_NULL) {
				cc->tail = p;
			} else {
				set_prev(cc, n, p);
			}
			set_prev(cc, cc->head, x);
			set_next(cc, x, cc->head);
			set_prev(cc, x, ADDR_NULL);
			cc->head = x;
		}
		return 1;
	}
	return 0;
}

static const br_ssl_session_cache_class lru_class = {
	sizeof(br_ssl_session_cache_lru),
	&lru_save,
	&lru_load
};

/* see inner.h */
void
br_ssl_session_cache_lru_init(br_ssl_session_cache_lru *cc,
	unsigned char *store, size_t store_len)
{
	cc->vtable = &lru_class;
	cc->store = store;
	cc->store_len = store_len;
	cc->store_ptr = 0;
	cc->init_done = 0;
	cc->head = ADDR_NULL;
	cc->tail = ADDR_NULL;
	cc->root = ADDR_NULL;
}

/* see bearssl_ssl.h */
void br_ssl_session_cache_lru_forget(
	br_ssl_session_cache_lru *cc, const unsigned char *id)
{
	unsigned char mid[SESSION_ID_LEN];
	uint32_t addr;

	/*
	 * If the cache is not initialised yet, then it is empty, and
	 * there is nothing to forget.
	 */
	if (!cc->init_done) {
		return;
	}

	/*
	 * Look for the node in the tree. If found, the entry is marked
	 * as "disabled"; it will be reused in due course, as it ages
	 * through the list.
	 *
	 * We do not go through the complex moves of actually releasing
	 * the entry right away because explicitly forgetting sessions
	 * should be a rare event, meant mostly for testing purposes,
	 * so this is not worth the extra code size.
	 */
	mask_id(cc, id, mid);
	addr = find_node(cc, mid, NULL);
	if (addr != ADDR_NULL) {
		br_enc16be(cc->store + addr + VERSION_OFF, 0);
	}
}