xref: /freebsd/sys/amd64/include/pcpu.h (revision 95ee2897)
1 /*-
2  * SPDX-License-Identifier: BSD-2-Clause
3  *
4  * Copyright (c) Peter Wemm <peter@netplex.com.au>
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 #ifdef __i386__
30 #include <i386/pcpu.h>
31 #else /* !__i386__ */
32 
33 #ifndef _MACHINE_PCPU_H_
34 #define	_MACHINE_PCPU_H_
35 
36 #include <machine/_pmap.h>
37 #include <machine/segments.h>
38 #include <machine/tss.h>
39 
40 #define	PC_PTI_STACK_SZ	16
41 
42 struct monitorbuf {
43 	int idle_state;		/* Used by cpu_idle_mwait. */
44 	int stop_state;		/* Used by cpustop_handler. */
45 	char padding[128 - (2 * sizeof(int))];
46 };
47 _Static_assert(sizeof(struct monitorbuf) == 128, "2x cache line");
48 
49 /*
50  * The SMP parts are setup in pmap.c and locore.s for the BSP, and
51  * mp_machdep.c sets up the data for the AP's to "see" when they awake.
52  * The reason for doing it via a struct is so that an array of pointers
53  * to each CPU's data can be set up for things like "check curproc on all
54  * other processors"
55  */
56 #define	PCPU_MD_FIELDS							\
57 	struct monitorbuf pc_monitorbuf __aligned(128);	/* cache line */\
58 	struct	pcpu *pc_prvspace;	/* Self-reference */		\
59 	struct	pmap *pc_curpmap;					\
60 	struct	amd64tss *pc_tssp;	/* TSS segment active on CPU */	\
61 	void	*pc_pad0;						\
62 	uint64_t pc_kcr3;						\
63 	uint64_t pc_ucr3;						\
64 	uint64_t pc_saved_ucr3;						\
65 	register_t pc_rsp0;						\
66 	register_t pc_scratch_rsp;	/* User %rsp in syscall */	\
67 	register_t pc_scratch_rax;					\
68 	u_int	pc_apic_id;						\
69 	u_int   pc_acpi_id;		/* ACPI CPU id */		\
70 	/* Pointer to the CPU %fs descriptor */				\
71 	struct user_segment_descriptor	*pc_fs32p;			\
72 	/* Pointer to the CPU %gs descriptor */				\
73 	struct user_segment_descriptor	*pc_gs32p;			\
74 	/* Pointer to the CPU LDT descriptor */				\
75 	struct system_segment_descriptor *pc_ldt;			\
76 	/* Pointer to the CPU TSS descriptor */				\
77 	struct system_segment_descriptor *pc_tss;			\
78 	u_int	pc_cmci_mask;		/* MCx banks for CMCI */	\
79 	uint64_t pc_dbreg[16];		/* ddb debugging regs */	\
80 	uint64_t pc_pti_stack[PC_PTI_STACK_SZ];				\
81 	register_t pc_pti_rsp0;						\
82 	int pc_dbreg_cmd;		/* ddb debugging reg cmd */	\
83 	u_int	pc_vcpu_id;		/* Xen vCPU ID */		\
84 	uint32_t pc_pcid_next;						\
85 	uint32_t pc_pcid_gen;						\
86 	uint32_t pc_unused;						\
87 	uint32_t pc_ibpb_set;						\
88 	void	*pc_mds_buf;						\
89 	void	*pc_mds_buf64;						\
90 	uint32_t pc_pad[4];						\
91 	uint8_t	pc_mds_tmp[64];						\
92 	u_int 	pc_ipi_bitmap;						\
93 	struct amd64tss pc_common_tss;					\
94 	struct user_segment_descriptor pc_gdt[NGDT];			\
95 	void	*pc_smp_tlb_pmap;					\
96 	uint64_t pc_smp_tlb_addr1;					\
97 	uint64_t pc_smp_tlb_addr2;					\
98 	uint32_t pc_smp_tlb_gen;					\
99 	u_int	pc_smp_tlb_op;						\
100 	uint64_t pc_ucr3_load_mask;					\
101 	u_int	pc_small_core;						\
102 	u_int	pc_pcid_invlpg_workaround;				\
103 	struct pmap_pcid pc_kpmap_store;				\
104 	char	__pad[2900]		/* pad to UMA_PCPU_ALLOC_SIZE */
105 
106 #define	PC_DBREG_CMD_NONE	0
107 #define	PC_DBREG_CMD_LOAD	1
108 
109 #ifdef _KERNEL
110 
111 #define MONITOR_STOPSTATE_RUNNING	0
112 #define MONITOR_STOPSTATE_STOPPED	1
113 
114 /*
115  * Evaluates to the type of the per-cpu variable name.
116  */
117 #define	__pcpu_type(name)						\
118 	__typeof(((struct pcpu *)0)->name)
119 
120 #ifdef __SEG_GS
121 #define	get_pcpu() __extension__ ({					\
122 	static struct pcpu __seg_gs *__pc = 0;				\
123 									\
124 	__pc->pc_prvspace;						\
125 })
126 
127 /*
128  * Evaluates to the address of the per-cpu variable name.
129  */
130 #define	__PCPU_PTR(name) __extension__ ({				\
131 	struct pcpu *__pc = get_pcpu();					\
132 									\
133 	&__pc->name;							\
134 })
135 
136 /*
137  * Evaluates to the value of the per-cpu variable name.
138  */
139 #define	__PCPU_GET(name) __extension__ ({				\
140 	static struct pcpu __seg_gs *__pc = 0;				\
141 									\
142 	__pc->name;							\
143 })
144 
145 /*
146  * Adds the value to the per-cpu counter name.  The implementation
147  * must be atomic with respect to interrupts.
148  */
149 #define	__PCPU_ADD(name, val) do {					\
150 	static struct pcpu __seg_gs *__pc = 0;				\
151 	__pcpu_type(name) __val;					\
152 									\
153 	__val = (val);							\
154 	if (sizeof(__val) == 1 || sizeof(__val) == 2 ||			\
155 	    sizeof(__val) == 4 || sizeof(__val) == 8) {			\
156 		__pc->name += __val;					\
157 	} else								\
158 		*__PCPU_PTR(name) += __val;				\
159 } while (0)
160 
161 /*
162  * Sets the value of the per-cpu variable name to value val.
163  */
164 #define	__PCPU_SET(name, val) do {					\
165 	static struct pcpu __seg_gs *__pc = 0;				\
166 	__pcpu_type(name) __val;					\
167 									\
168 	__val = (val);							\
169 	if (sizeof(__val) == 1 || sizeof(__val) == 2 ||			\
170 	    sizeof(__val) == 4 || sizeof(__val) == 8) {			\
171 		__pc->name = __val;					\
172 	} else								\
173 		*__PCPU_PTR(name) = __val;				\
174 } while (0)
175 #else /* !__SEG_GS */
176 /*
177  * Evaluates to the byte offset of the per-cpu variable name.
178  */
179 #define	__pcpu_offset(name)						\
180 	__offsetof(struct pcpu, name)
181 
182 /*
183  * Evaluates to the address of the per-cpu variable name.
184  */
185 #define	__PCPU_PTR(name) __extension__ ({				\
186 	__pcpu_type(name) *__p;						\
187 									\
188 	__asm __volatile("movq %%gs:%1,%0; addq %2,%0"			\
189 	    : "=r" (__p)						\
190 	    : "m" (*(struct pcpu *)(__pcpu_offset(pc_prvspace))),	\
191 	      "i" (__pcpu_offset(name)));				\
192 									\
193 	__p;								\
194 })
195 
196 /*
197  * Evaluates to the value of the per-cpu variable name.
198  */
199 #define	__PCPU_GET(name) __extension__ ({				\
200 	__pcpu_type(name) __res;					\
201 	struct __s {							\
202 		u_char	__b[MIN(sizeof(__pcpu_type(name)), 8)];		\
203 	} __s;								\
204 									\
205 	if (sizeof(__res) == 1 || sizeof(__res) == 2 ||			\
206 	    sizeof(__res) == 4 || sizeof(__res) == 8) {			\
207 		__asm __volatile("mov %%gs:%1,%0"			\
208 		    : "=r" (__s)					\
209 		    : "m" (*(struct __s *)(__pcpu_offset(name))));	\
210 		*(struct __s *)(void *)&__res = __s;			\
211 	} else {							\
212 		__res = *__PCPU_PTR(name);				\
213 	}								\
214 	__res;								\
215 })
216 
217 /*
218  * Adds the value to the per-cpu counter name.  The implementation
219  * must be atomic with respect to interrupts.
220  */
221 #define	__PCPU_ADD(name, val) do {					\
222 	__pcpu_type(name) __val;					\
223 	struct __s {							\
224 		u_char	__b[MIN(sizeof(__pcpu_type(name)), 8)];		\
225 	} __s;								\
226 									\
227 	__val = (val);							\
228 	if (sizeof(__val) == 1 || sizeof(__val) == 2 ||			\
229 	    sizeof(__val) == 4 || sizeof(__val) == 8) {			\
230 		__s = *(struct __s *)(void *)&__val;			\
231 		__asm __volatile("add %1,%%gs:%0"			\
232 		    : "=m" (*(struct __s *)(__pcpu_offset(name)))	\
233 		    : "r" (__s));					\
234 	} else								\
235 		*__PCPU_PTR(name) += __val;				\
236 } while (0)
237 
238 /*
239  * Sets the value of the per-cpu variable name to value val.
240  */
241 #define	__PCPU_SET(name, val) {						\
242 	__pcpu_type(name) __val;					\
243 	struct __s {							\
244 		u_char	__b[MIN(sizeof(__pcpu_type(name)), 8)];		\
245 	} __s;								\
246 									\
247 	__val = (val);							\
248 	if (sizeof(__val) == 1 || sizeof(__val) == 2 ||			\
249 	    sizeof(__val) == 4 || sizeof(__val) == 8) {			\
250 		__s = *(struct __s *)(void *)&__val;			\
251 		__asm __volatile("mov %1,%%gs:%0"			\
252 		    : "=m" (*(struct __s *)(__pcpu_offset(name)))	\
253 		    : "r" (__s));					\
254 	} else {							\
255 		*__PCPU_PTR(name) = __val;				\
256 	}								\
257 }
258 
259 #define	get_pcpu() __extension__ ({					\
260 	struct pcpu *__pc;						\
261 									\
262 	__asm __volatile("movq %%gs:%1,%0"				\
263 	    : "=r" (__pc)						\
264 	    : "m" (*(struct pcpu *)(__pcpu_offset(pc_prvspace))));	\
265 	__pc;								\
266 })
267 #endif /* !__SEG_GS */
268 
269 #define	PCPU_GET(member)	__PCPU_GET(pc_ ## member)
270 #define	PCPU_ADD(member, val)	__PCPU_ADD(pc_ ## member, val)
271 #define	PCPU_PTR(member)	__PCPU_PTR(pc_ ## member)
272 #define	PCPU_SET(member, val)	__PCPU_SET(pc_ ## member, val)
273 
274 #define	IS_BSP()	(PCPU_GET(cpuid) == 0)
275 
276 #define zpcpu_offset_cpu(cpu)	((uintptr_t)&__pcpu[0] + UMA_PCPU_ALLOC_SIZE * cpu)
277 #define zpcpu_base_to_offset(base) (void *)((uintptr_t)(base) - (uintptr_t)&__pcpu[0])
278 #define zpcpu_offset_to_base(base) (void *)((uintptr_t)(base) + (uintptr_t)&__pcpu[0])
279 
280 #define zpcpu_sub_protected(base, n) do {				\
281 	ZPCPU_ASSERT_PROTECTED();					\
282 	zpcpu_sub(base, n);						\
283 } while (0)
284 
285 #define zpcpu_set_protected(base, n) do {				\
286 	__typeof(*base) __n = (n);					\
287 	ZPCPU_ASSERT_PROTECTED();					\
288 	switch (sizeof(*base)) {					\
289 	case 4:								\
290 		__asm __volatile("movl\t%1,%%gs:(%0)"			\
291 		    : : "r" (base), "ri" (__n) : "memory", "cc");	\
292 		break;							\
293 	case 8:								\
294 		__asm __volatile("movq\t%1,%%gs:(%0)"			\
295 		    : : "r" (base), "ri" (__n) : "memory", "cc");	\
296 		break;							\
297 	default:							\
298 		*zpcpu_get(base) = __n;					\
299 	}								\
300 } while (0);
301 
302 #define zpcpu_add(base, n) do {						\
303 	__typeof(*base) __n = (n);					\
304 	CTASSERT(sizeof(*base) == 4 || sizeof(*base) == 8);		\
305 	switch (sizeof(*base)) {					\
306 	case 4:								\
307 		__asm __volatile("addl\t%1,%%gs:(%0)"			\
308 		    : : "r" (base), "ri" (__n) : "memory", "cc");	\
309 		break;							\
310 	case 8:								\
311 		__asm __volatile("addq\t%1,%%gs:(%0)"			\
312 		    : : "r" (base), "ri" (__n) : "memory", "cc");	\
313 		break;							\
314 	}								\
315 } while (0)
316 
317 #define zpcpu_add_protected(base, n) do {				\
318 	ZPCPU_ASSERT_PROTECTED();					\
319 	zpcpu_add(base, n);						\
320 } while (0)
321 
322 #define zpcpu_sub(base, n) do {						\
323 	__typeof(*base) __n = (n);					\
324 	CTASSERT(sizeof(*base) == 4 || sizeof(*base) == 8);		\
325 	switch (sizeof(*base)) {					\
326 	case 4:								\
327 		__asm __volatile("subl\t%1,%%gs:(%0)"			\
328 		    : : "r" (base), "ri" (__n) : "memory", "cc");	\
329 		break;							\
330 	case 8:								\
331 		__asm __volatile("subq\t%1,%%gs:(%0)"			\
332 		    : : "r" (base), "ri" (__n) : "memory", "cc");	\
333 		break;							\
334 	}								\
335 } while (0);
336 
337 #endif /* _KERNEL */
338 
339 #endif /* !_MACHINE_PCPU_H_ */
340 
341 #endif /* __i386__ */
342