1// SPDX-License-Identifier: GPL-2.0-only
2
3#include "msm8916-pm8916.dtsi"
4#include "msm8916-modem-qdsp6.dtsi"
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/input/input.h>
8#include <dt-bindings/interrupt-controller/irq.h>
9
10/ {
11	aliases {
12		mmc0 = &sdhc_1; /* eMMC */
13		mmc1 = &sdhc_2; /* SD card */
14		serial0 = &blsp_uart2;
15	};
16
17	chosen {
18		stdout-path = "serial0";
19	};
20
21	reserved-memory {
22		/* Additional memory used by Samsung firmware modifications */
23		tz-apps@85500000 {
24			reg = <0x0 0x85500000 0x0 0xb00000>;
25			no-map;
26		};
27	};
28
29	gpio_hall_sensor: gpio-hall-sensor {
30		compatible = "gpio-keys";
31
32		pinctrl-names = "default";
33		pinctrl-0 = <&gpio_hall_sensor_default>;
34
35		label = "GPIO Hall Effect Sensor";
36
37		event-hall-sensor {
38			label = "Hall Effect Sensor";
39			gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
40			linux,input-type = <EV_SW>;
41			linux,code = <SW_LID>;
42			linux,can-disable;
43		};
44	};
45
46	gpio-keys {
47		compatible = "gpio-keys";
48
49		pinctrl-names = "default";
50		pinctrl-0 = <&gpio_keys_default>;
51
52		label = "GPIO Buttons";
53
54		button-volume-up {
55			label = "Volume Up";
56			gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
57			linux,code = <KEY_VOLUMEUP>;
58		};
59
60		button-home {
61			label = "Home Key";
62			gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
63			linux,code = <KEY_HOMEPAGE>;
64		};
65	};
66
67	i2c_muic: i2c-muic {
68		compatible = "i2c-gpio";
69		sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
70		scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
71
72		pinctrl-names = "default";
73		pinctrl-0 = <&muic_i2c_default>;
74
75		#address-cells = <1>;
76		#size-cells = <0>;
77
78		muic: extcon@25 {
79			compatible = "siliconmitus,sm5703-muic";
80			reg = <0x25>;
81
82			interrupt-parent = <&tlmm>;
83			interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
84
85			pinctrl-names = "default";
86			pinctrl-0 = <&muic_int_default>;
87		};
88	};
89
90	i2c_sensors: i2c-sensors {
91		compatible = "i2c-gpio";
92
93		sda-gpios = <&tlmm 31 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
94		scl-gpios = <&tlmm 32 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
95
96		pinctrl-0 = <&sensors_i2c_default>;
97		pinctrl-names = "default";
98
99		#address-cells = <1>;
100		#size-cells = <0>;
101
102		accelerometer: accelerometer@1d {
103			compatible = "st,lis2hh12";
104			reg = <0x1d>;
105
106			interrupts-extended = <&tlmm 115 IRQ_TYPE_LEVEL_HIGH>;
107
108			pinctrl-0 = <&accel_int_default>;
109			pinctrl-names = "default";
110
111			st,drdy-int-pin = <1>;
112		};
113	};
114};
115
116&blsp_i2c5 {
117	status = "okay";
118
119	touchscreen: touchscreen@50 {
120		compatible = "imagis,ist3038c";
121		reg = <0x50>;
122
123		interrupt-parent = <&tlmm>;
124		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
125
126		touchscreen-size-x = <720>;
127		touchscreen-size-y = <1280>;
128
129		vddio-supply = <&pm8916_l6>;
130
131		pinctrl-0 = <&tsp_int_default>;
132		pinctrl-names = "default";
133	};
134};
135
136&blsp_uart2 {
137	status = "okay";
138};
139
140&mpss_mem {
141	reg = <0x0 0x86800000 0x0 0x5800000>;
142};
143
144&pm8916_resin {
145	status = "okay";
146	linux,code = <KEY_VOLUMEDOWN>;
147};
148
149&sdhc_1 {
150	status = "okay";
151};
152
153&sdhc_2 {
154	status = "okay";
155
156	pinctrl-names = "default", "sleep";
157	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
158	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
159
160	cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
161};
162
163&sound {
164	model = "msm8916-1mic";
165	audio-routing =
166		"AMIC1", "MIC BIAS External1",
167		"AMIC2", "MIC BIAS Internal2",
168		"AMIC3", "MIC BIAS External1";
169};
170
171&usb {
172	extcon = <&muic>, <&muic>;
173	status = "okay";
174};
175
176&usb_hs_phy {
177	extcon = <&muic>;
178};
179
180&venus {
181	status = "okay";
182};
183
184&venus_mem {
185	status = "okay";
186};
187
188&wcnss {
189	status = "okay";
190};
191
192&wcnss_iris {
193	compatible = "qcom,wcn3620";
194};
195
196&wcnss_mem {
197	status = "okay";
198};
199
200&tlmm {
201	accel_int_default: accel-int-default-state {
202		pins = "gpio115";
203		function = "gpio";
204		drive-strength = <2>;
205		bias-disable;
206	};
207
208	gpio_hall_sensor_default: gpio-hall-sensor-default-state {
209		pins = "gpio52";
210		function = "gpio";
211
212		drive-strength = <2>;
213		bias-disable;
214	};
215
216	gpio_keys_default: gpio-keys-default-state {
217		pins = "gpio107", "gpio109";
218		function = "gpio";
219
220		drive-strength = <2>;
221		bias-pull-up;
222	};
223
224	muic_i2c_default: muic-i2c-default-state {
225		pins = "gpio105", "gpio106";
226		function = "gpio";
227
228		drive-strength = <2>;
229		bias-disable;
230	};
231
232	muic_int_default: muic-int-default-state {
233		pins = "gpio12";
234		function = "gpio";
235
236		drive-strength = <2>;
237		bias-disable;
238	};
239
240	sdc2_cd_default: sdc2-cd-default-state {
241		pins = "gpio38";
242		function = "gpio";
243
244		drive-strength = <2>;
245		bias-disable;
246	};
247
248	sensors_i2c_default: sensors-i2c-default-state {
249		pins = "gpio31", "gpio32";
250		function = "gpio";
251		drive-strength = <2>;
252		bias-disable;
253	};
254
255	tsp_int_default: tsp-int-default-state {
256		pins = "gpio13";
257		function = "gpio";
258
259		drive-strength = <2>;
260		bias-disable;
261	};
262};
263