1 /* Copyright (c) 2008-2012 Freescale Semiconductor, Inc 2 * All rights reserved. 3 * 4 * Redistribution and use in source and binary forms, with or without 5 * modification, are permitted provided that the following conditions are met: 6 * * Redistributions of source code must retain the above copyright 7 * notice, this list of conditions and the following disclaimer. 8 * * Redistributions in binary form must reproduce the above copyright 9 * notice, this list of conditions and the following disclaimer in the 10 * documentation and/or other materials provided with the distribution. 11 * * Neither the name of Freescale Semiconductor nor the 12 * names of its contributors may be used to endorse or promote products 13 * derived from this software without specific prior written permission. 14 * 15 * 16 * ALTERNATIVELY, this software may be distributed under the terms of the 17 * GNU General Public License ("GPL") as published by the Free Software 18 * Foundation, either version 2 of that License or (at your option) any 19 * later version. 20 * 21 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 22 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 23 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 24 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 25 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 26 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 27 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 28 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 30 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 34 /**************************************************************************//** 35 @File fm_pcd_ext.h 36 37 @Description FM PCD API definitions 38 *//***************************************************************************/ 39 #ifndef __FM_PCD_EXT 40 #define __FM_PCD_EXT 41 42 #include "std_ext.h" 43 #include "net_ext.h" 44 #include "list_ext.h" 45 #include "fm_ext.h" 46 #include "fsl_fman_kg.h" 47 48 49 /**************************************************************************//** 50 @Group FM_grp Frame Manager API 51 52 @Description Frame Manager Application Programming Interface 53 54 @{ 55 *//***************************************************************************/ 56 57 /**************************************************************************//** 58 @Group FM_PCD_grp FM PCD 59 60 @Description Frame Manager PCD (Parse-Classify-Distribute) API. 61 62 The FM PCD module is responsible for the initialization of all 63 global classifying FM modules. This includes the parser general and 64 common registers, the key generator global and common registers, 65 and the policer global and common registers. 66 In addition, the FM PCD SW module will initialize all required 67 key generator schemes, coarse classification flows, and policer 68 profiles. When FM module is configured to work with one of these 69 entities, it will register to it using the FM PORT API. The PCD 70 module will manage the PCD resources - i.e. resource management of 71 KeyGen schemes, etc. 72 73 @{ 74 *//***************************************************************************/ 75 76 /**************************************************************************//** 77 @Collection General PCD defines 78 *//***************************************************************************/ 79 #define FM_PCD_MAX_NUM_OF_PRIVATE_HDRS 2 /**< Number of units/headers saved for user */ 80 81 #define FM_PCD_PRS_NUM_OF_HDRS 16 /**< Number of headers supported by HW parser */ 82 #define FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS (32 - FM_PCD_MAX_NUM_OF_PRIVATE_HDRS) 83 /**< Number of distinction units is limited by 84 register size (32 bits) minus reserved bits 85 for private headers. */ 86 #define FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS 4 /**< Maximum number of interchangeable headers 87 in a distinction unit */ 88 #define FM_PCD_KG_NUM_OF_GENERIC_REGS FM_KG_NUM_OF_GENERIC_REGS /**< Total number of generic KeyGen registers */ 89 #define FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY 35 /**< Max number allowed on any configuration; 90 For HW implementation reasons, in most 91 cases less than this will be allowed; The 92 driver will return an initialization error 93 if resource is unavailable. */ 94 #define FM_PCD_KG_NUM_OF_EXTRACT_MASKS 4 /**< Total number of masks allowed on KeyGen extractions. */ 95 #define FM_PCD_KG_NUM_OF_DEFAULT_GROUPS 16 /**< Number of default value logical groups */ 96 97 #define FM_PCD_PRS_NUM_OF_LABELS 32 /**< Maximum number of SW parser labels */ 98 #define FM_SW_PRS_MAX_IMAGE_SIZE (FM_PCD_SW_PRS_SIZE /*- FM_PCD_PRS_SW_OFFSET -FM_PCD_PRS_SW_TAIL_SIZE*/-FM_PCD_PRS_SW_PATCHES_SIZE) 99 /**< Maximum size of SW parser code */ 100 101 #define FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE 128 /**< Maximum size of insertion template for 102 insert manipulation */ 103 104 #if (DPAA_VERSION >= 11) 105 #define FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES 64 /**< Maximum possible entries for frame replicator group */ 106 #endif /* (DPAA_VERSION >= 11) */ 107 /* @} */ 108 109 110 /**************************************************************************//** 111 @Group FM_PCD_init_grp FM PCD Initialization Unit 112 113 @Description Frame Manager PCD Initialization Unit API 114 115 @{ 116 *//***************************************************************************/ 117 118 /**************************************************************************//** 119 @Description PCD counters 120 *//***************************************************************************/ 121 typedef enum e_FmPcdCounters { 122 e_FM_PCD_KG_COUNTERS_TOTAL, /**< KeyGen counter */ 123 e_FM_PCD_PLCR_COUNTERS_RED, /**< Policer counter - counts the total number of RED packets that exit the Policer. */ 124 e_FM_PCD_PLCR_COUNTERS_YELLOW, /**< Policer counter - counts the total number of YELLOW packets that exit the Policer. */ 125 e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_RED, /**< Policer counter - counts the number of packets that changed color to RED by the Policer; 126 This is a subset of e_FM_PCD_PLCR_COUNTERS_RED packet count, indicating active color changes. */ 127 e_FM_PCD_PLCR_COUNTERS_RECOLORED_TO_YELLOW, /**< Policer counter - counts the number of packets that changed color to YELLOW by the Policer; 128 This is a subset of e_FM_PCD_PLCR_COUNTERS_YELLOW packet count, indicating active color changes. */ 129 e_FM_PCD_PLCR_COUNTERS_TOTAL, /**< Policer counter - counts the total number of packets passed in the Policer. */ 130 e_FM_PCD_PLCR_COUNTERS_LENGTH_MISMATCH, /**< Policer counter - counts the number of packets with length mismatch. */ 131 e_FM_PCD_PRS_COUNTERS_PARSE_DISPATCH, /**< Parser counter - counts the number of times the parser block is dispatched. */ 132 e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED, /**< Parser counter - counts the number of times L2 parse result is returned (including errors). */ 133 e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED, /**< Parser counter - counts the number of times L3 parse result is returned (including errors). */ 134 e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED, /**< Parser counter - counts the number of times L4 parse result is returned (including errors). */ 135 e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED, /**< Parser counter - counts the number of times SHIM parse result is returned (including errors). */ 136 e_FM_PCD_PRS_COUNTERS_L2_PARSE_RESULT_RETURNED_WITH_ERR, /**< Parser counter - counts the number of times L2 parse result is returned with errors. */ 137 e_FM_PCD_PRS_COUNTERS_L3_PARSE_RESULT_RETURNED_WITH_ERR, /**< Parser counter - counts the number of times L3 parse result is returned with errors. */ 138 e_FM_PCD_PRS_COUNTERS_L4_PARSE_RESULT_RETURNED_WITH_ERR, /**< Parser counter - counts the number of times L4 parse result is returned with errors. */ 139 e_FM_PCD_PRS_COUNTERS_SHIM_PARSE_RESULT_RETURNED_WITH_ERR, /**< Parser counter - counts the number of times SHIM parse result is returned with errors. */ 140 e_FM_PCD_PRS_COUNTERS_SOFT_PRS_CYCLES, /**< Parser counter - counts the number of cycles spent executing soft parser instruction (including stall cycles). */ 141 e_FM_PCD_PRS_COUNTERS_SOFT_PRS_STALL_CYCLES, /**< Parser counter - counts the number of cycles stalled waiting for parser internal memory reads while executing soft parser instruction. */ 142 e_FM_PCD_PRS_COUNTERS_HARD_PRS_CYCLE_INCL_STALL_CYCLES, /**< Parser counter - counts the number of cycles spent executing hard parser (including stall cycles). */ 143 e_FM_PCD_PRS_COUNTERS_MURAM_READ_CYCLES, /**< MURAM counter - counts the number of cycles while performing FMan Memory read. */ 144 e_FM_PCD_PRS_COUNTERS_MURAM_READ_STALL_CYCLES, /**< MURAM counter - counts the number of cycles stalled while performing FMan Memory read. */ 145 e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_CYCLES, /**< MURAM counter - counts the number of cycles while performing FMan Memory write. */ 146 e_FM_PCD_PRS_COUNTERS_MURAM_WRITE_STALL_CYCLES, /**< MURAM counter - counts the number of cycles stalled while performing FMan Memory write. */ 147 e_FM_PCD_PRS_COUNTERS_FPM_COMMAND_STALL_CYCLES /**< FPM counter - counts the number of cycles stalled while performing a FPM Command. */ 148 } e_FmPcdCounters; 149 150 /**************************************************************************//** 151 @Description PCD interrupts 152 *//***************************************************************************/ 153 typedef enum e_FmPcdExceptions { 154 e_FM_PCD_KG_EXCEPTION_DOUBLE_ECC, /**< KeyGen double-bit ECC error is detected on internal memory read access. */ 155 e_FM_PCD_KG_EXCEPTION_KEYSIZE_OVERFLOW, /**< KeyGen scheme configuration error indicating a key size larger than 56 bytes. */ 156 e_FM_PCD_PLCR_EXCEPTION_DOUBLE_ECC, /**< Policer double-bit ECC error has been detected on PRAM read access. */ 157 e_FM_PCD_PLCR_EXCEPTION_INIT_ENTRY_ERROR, /**< Policer access to a non-initialized profile has been detected. */ 158 e_FM_PCD_PLCR_EXCEPTION_PRAM_SELF_INIT_COMPLETE, /**< Policer RAM self-initialization complete */ 159 e_FM_PCD_PLCR_EXCEPTION_ATOMIC_ACTION_COMPLETE, /**< Policer atomic action complete */ 160 e_FM_PCD_PRS_EXCEPTION_DOUBLE_ECC, /**< Parser double-bit ECC error */ 161 e_FM_PCD_PRS_EXCEPTION_SINGLE_ECC /**< Parser single-bit ECC error */ 162 } e_FmPcdExceptions; 163 164 165 /**************************************************************************//** 166 @Description Exceptions user callback routine, will be called upon an 167 exception passing the exception identification. 168 169 @Param[in] h_App - User's application descriptor. 170 @Param[in] exception - The exception. 171 *//***************************************************************************/ 172 typedef void (t_FmPcdExceptionCallback) (t_Handle h_App, e_FmPcdExceptions exception); 173 174 /**************************************************************************//** 175 @Description Exceptions user callback routine, will be called upon an exception 176 passing the exception identification. 177 178 @Param[in] h_App - User's application descriptor. 179 @Param[in] exception - The exception. 180 @Param[in] index - id of the relevant source (may be scheme or profile id). 181 *//***************************************************************************/ 182 typedef void (t_FmPcdIdExceptionCallback) ( t_Handle h_App, 183 e_FmPcdExceptions exception, 184 uint16_t index); 185 186 /**************************************************************************//** 187 @Description A callback for enqueuing frame onto a QM queue. 188 189 @Param[in] h_QmArg - Application's handle passed to QM module on enqueue. 190 @Param[in] p_Fd - Frame descriptor for the frame. 191 192 @Return E_OK on success; Error code otherwise. 193 *//***************************************************************************/ 194 typedef t_Error (t_FmPcdQmEnqueueCallback) (t_Handle h_QmArg, void *p_Fd); 195 196 /**************************************************************************//** 197 @Description Host-Command parameters structure. 198 199 When using Host command for PCD functionalities, a dedicated port 200 must be used. If this routine is called for a PCD in a single partition 201 environment, or it is the Master partition in a Multi-partition 202 environment, The port will be initialized by the PCD driver 203 initialization routine. 204 *//***************************************************************************/ 205 typedef struct t_FmPcdHcParams { 206 uintptr_t portBaseAddr; /**< Virtual Address of Host-Command Port memory mapped registers.*/ 207 uint8_t portId; /**< Port Id (0-6 relative to Host-Command/Offline-Parsing ports); 208 NOTE: When configuring Host Command port for 209 FMANv3 devices (DPAA_VERSION 11 and higher), 210 portId=0 MUST be used. */ 211 uint16_t liodnBase; /**< LIODN base for this port, to be used together with LIODN offset 212 (irrelevant for P4080 revision 1.0) */ 213 uint32_t errFqid; /**< Host-Command Port error queue Id. */ 214 uint32_t confFqid; /**< Host-Command Port confirmation queue Id. */ 215 uint32_t qmChannel; /**< QM channel dedicated to this Host-Command port; 216 will be used by the FM for dequeue. */ 217 t_FmPcdQmEnqueueCallback *f_QmEnqueue; /**< Callback routine for enqueuing a frame to the QM */ 218 t_Handle h_QmArg; /**< Application's handle passed to QM module on enqueue */ 219 } t_FmPcdHcParams; 220 221 /**************************************************************************//** 222 @Description The main structure for PCD initialization 223 *//***************************************************************************/ 224 typedef struct t_FmPcdParams { 225 bool prsSupport; /**< TRUE if Parser will be used for any of the FM ports. */ 226 bool ccSupport; /**< TRUE if Coarse Classification will be used for any 227 of the FM ports. */ 228 bool kgSupport; /**< TRUE if KeyGen will be used for any of the FM ports. */ 229 bool plcrSupport; /**< TRUE if Policer will be used for any of the FM ports. */ 230 t_Handle h_Fm; /**< A handle to the FM module. */ 231 uint8_t numOfSchemes; /**< Number of schemes dedicated to this partition. 232 this parameter is relevant if 'kgSupport'=TRUE. */ 233 bool useHostCommand; /**< Optional for single partition, Mandatory for Multi partition */ 234 t_FmPcdHcParams hc; /**< Host Command parameters, relevant only if 'useHostCommand'=TRUE; 235 Relevant when FM not runs in "guest-mode". */ 236 237 t_FmPcdExceptionCallback *f_Exception; /**< Callback routine for general PCD exceptions; 238 Relevant when FM not runs in "guest-mode". */ 239 t_FmPcdIdExceptionCallback *f_ExceptionId; /**< Callback routine for specific KeyGen scheme or 240 Policer profile exceptions; 241 Relevant when FM not runs in "guest-mode". */ 242 t_Handle h_App; /**< A handle to an application layer object; This handle will 243 be passed by the driver upon calling the above callbacks; 244 Relevant when FM not runs in "guest-mode". */ 245 uint8_t partPlcrProfilesBase; /**< The first policer-profile-id dedicated to this partition. 246 this parameter is relevant if 'plcrSupport'=TRUE. 247 NOTE: this parameter relevant only when working with multiple partitions. */ 248 uint16_t partNumOfPlcrProfiles; /**< Number of policer-profiles dedicated to this partition. 249 this parameter is relevant if 'plcrSupport'=TRUE. 250 NOTE: this parameter relevant only when working with multiple partitions. */ 251 } t_FmPcdParams; 252 253 254 /**************************************************************************//** 255 @Function FM_PCD_Config 256 257 @Description Basic configuration of the PCD module. 258 Creates descriptor for the FM PCD module. 259 260 @Param[in] p_FmPcdParams A structure of parameters for the initialization of PCD. 261 262 @Return A handle to the initialized module. 263 *//***************************************************************************/ 264 t_Handle FM_PCD_Config(t_FmPcdParams *p_FmPcdParams); 265 266 /**************************************************************************//** 267 @Function FM_PCD_Init 268 269 @Description Initialization of the PCD module. 270 271 @Param[in] h_FmPcd - FM PCD module descriptor. 272 273 @Return E_OK on success; Error code otherwise. 274 *//***************************************************************************/ 275 t_Error FM_PCD_Init(t_Handle h_FmPcd); 276 277 /**************************************************************************//** 278 @Function FM_PCD_Free 279 280 @Description Frees all resources that were assigned to FM module. 281 282 Calling this routine invalidates the descriptor. 283 284 @Param[in] h_FmPcd - FM PCD module descriptor. 285 286 @Return E_OK on success; Error code otherwise. 287 *//***************************************************************************/ 288 t_Error FM_PCD_Free(t_Handle h_FmPcd); 289 290 /**************************************************************************//** 291 @Group FM_PCD_advanced_cfg_grp FM PCD Advanced Configuration Unit 292 293 @Description Frame Manager PCD Advanced Configuration API. 294 295 @{ 296 *//***************************************************************************/ 297 298 /**************************************************************************//** 299 @Function FM_PCD_ConfigException 300 301 @Description Calling this routine changes the internal driver data base 302 from its default selection of exceptions enabling. 303 [DEFAULT_numOfSharedPlcrProfiles]. 304 305 @Param[in] h_FmPcd FM PCD module descriptor. 306 @Param[in] exception The exception to be selected. 307 @Param[in] enable TRUE to enable interrupt, FALSE to mask it. 308 309 @Return E_OK on success; Error code otherwise. 310 311 @Cautions This routine should NOT be called from guest-partition 312 (i.e. guestId != NCSW_MASTER_ID) 313 *//***************************************************************************/ 314 t_Error FM_PCD_ConfigException(t_Handle h_FmPcd, e_FmPcdExceptions exception, bool enable); 315 316 /**************************************************************************//** 317 @Function FM_PCD_ConfigHcFramesDataMemory 318 319 @Description Configures memory-partition-id for FMan-Controller Host-Command 320 frames. Calling this routine changes the internal driver data 321 base from its default configuration [0]. 322 323 @Param[in] h_FmPcd FM PCD module descriptor. 324 @Param[in] memId Memory partition ID. 325 326 @Return E_OK on success; Error code otherwise. 327 328 @Cautions This routine may be called only if 'useHostCommand' was TRUE 329 when FM_PCD_Config() routine was called. 330 *//***************************************************************************/ 331 t_Error FM_PCD_ConfigHcFramesDataMemory(t_Handle h_FmPcd, uint8_t memId); 332 333 /**************************************************************************//** 334 @Function FM_PCD_ConfigPlcrNumOfSharedProfiles 335 336 @Description Calling this routine changes the internal driver data base 337 from its default selection of exceptions enablement. 338 [DEFAULT_numOfSharedPlcrProfiles]. 339 340 @Param[in] h_FmPcd FM PCD module descriptor. 341 @Param[in] numOfSharedPlcrProfiles Number of profiles to 342 be shared between ports on this partition 343 344 @Return E_OK on success; Error code otherwise. 345 *//***************************************************************************/ 346 t_Error FM_PCD_ConfigPlcrNumOfSharedProfiles(t_Handle h_FmPcd, uint16_t numOfSharedPlcrProfiles); 347 348 /**************************************************************************//** 349 @Function FM_PCD_ConfigPlcrAutoRefreshMode 350 351 @Description Calling this routine changes the internal driver data base 352 from its default selection of exceptions enablement. 353 By default auto-refresh is [DEFAULT_plcrAutoRefresh]. 354 355 @Param[in] h_FmPcd FM PCD module descriptor. 356 @Param[in] enable TRUE to enable, FALSE to disable 357 358 @Return E_OK on success; Error code otherwise. 359 360 @Cautions This routine should NOT be called from guest-partition 361 (i.e. guestId != NCSW_MASTER_ID) 362 *//***************************************************************************/ 363 t_Error FM_PCD_ConfigPlcrAutoRefreshMode(t_Handle h_FmPcd, bool enable); 364 365 /**************************************************************************//** 366 @Function FM_PCD_ConfigPrsMaxCycleLimit 367 368 @Description Calling this routine changes the internal data structure for 369 the maximum parsing time from its default value 370 [DEFAULT_MAX_PRS_CYC_LIM]. 371 372 @Param[in] h_FmPcd FM PCD module descriptor. 373 @Param[in] value 0 to disable the mechanism, or new 374 maximum parsing time. 375 376 @Return E_OK on success; Error code otherwise. 377 378 @Cautions This routine should NOT be called from guest-partition 379 (i.e. guestId != NCSW_MASTER_ID) 380 *//***************************************************************************/ 381 t_Error FM_PCD_ConfigPrsMaxCycleLimit(t_Handle h_FmPcd,uint16_t value); 382 383 /** @} */ /* end of FM_PCD_advanced_cfg_grp group */ 384 /** @} */ /* end of FM_PCD_init_grp group */ 385 386 387 /**************************************************************************//** 388 @Group FM_PCD_Runtime_grp FM PCD Runtime Unit 389 390 @Description Frame Manager PCD Runtime Unit API 391 392 The runtime control allows creation of PCD infrastructure modules 393 such as Network Environment Characteristics, Classification Plan 394 Groups and Coarse Classification Trees. 395 It also allows on-the-fly initialization, modification and removal 396 of PCD modules such as KeyGen schemes, coarse classification nodes 397 and Policer profiles. 398 399 In order to explain the programming model of the PCD driver interface 400 a few terms should be explained, and will be used below. 401 - Distinction Header - One of the 16 protocols supported by the FM parser, 402 or one of the SHIM headers (1 or 2). May be a header with a special 403 option (see below). 404 - Interchangeable Headers Group - This is a group of Headers recognized 405 by either one of them. For example, if in a specific context the user 406 chooses to treat IPv4 and IPV6 in the same way, they may create an 407 interchangeable Headers Unit consisting of these 2 headers. 408 - A Distinction Unit - a Distinction Header or an Interchangeable Headers 409 Group. 410 - Header with special option - applies to Ethernet, MPLS, VLAN, IPv4 and 411 IPv6, includes multicast, broadcast and other protocol specific options. 412 In terms of hardware it relates to the options available in the classification 413 plan. 414 - Network Environment Characteristics - a set of Distinction Units that define 415 the total recognizable header selection for a certain environment. This is 416 NOT the list of all headers that will ever appear in a flow, but rather 417 everything that needs distinction in a flow, where distinction is made by KeyGen 418 schemes and coarse classification action descriptors. 419 420 The PCD runtime modules initialization is done in stages. The first stage after 421 initializing the PCD module itself is to establish a Network Flows Environment 422 Definition. The application may choose to establish one or more such environments. 423 Later, when needed, the application will have to state, for some of its modules, 424 to which single environment it belongs. 425 426 @{ 427 *//***************************************************************************/ 428 429 /**************************************************************************//** 430 @Description A structure for SW parser labels 431 *//***************************************************************************/ 432 typedef struct t_FmPcdPrsLabelParams { 433 uint32_t instructionOffset; /**< SW parser label instruction offset (2 bytes 434 resolution), relative to Parser RAM. */ 435 e_NetHeaderType hdr; /**< The existence of this header will invoke 436 the SW parser code; Use HEADER_TYPE_NONE 437 to indicate that sw parser is to run 438 independent of the existence of any protocol 439 (run before HW parser). */ 440 uint8_t indexPerHdr; /**< Normally 0, if more than one SW parser 441 attachments for the same header, use this 442 index to distinguish between them. */ 443 } t_FmPcdPrsLabelParams; 444 445 /**************************************************************************//** 446 @Description A structure for SW parser 447 *//***************************************************************************/ 448 typedef struct t_FmPcdPrsSwParams { 449 bool override; /**< FALSE to invoke a check that nothing else 450 was loaded to this address, including 451 internal patches. 452 TRUE to override any existing code.*/ 453 uint32_t size; /**< SW parser code size */ 454 uint16_t base; /**< SW parser base (in instruction counts! 455 must be larger than 0x20)*/ 456 uint8_t *p_Code; /**< SW parser code */ 457 uint32_t swPrsDataParams[FM_PCD_PRS_NUM_OF_HDRS]; 458 /**< SW parser data (parameters) */ 459 uint8_t numOfLabels; /**< Number of labels for SW parser. */ 460 t_FmPcdPrsLabelParams labelsTable[FM_PCD_PRS_NUM_OF_LABELS]; 461 /**< SW parser labels table, containing 462 numOfLabels entries */ 463 } t_FmPcdPrsSwParams; 464 465 466 /**************************************************************************//** 467 @Function FM_PCD_Enable 468 469 @Description This routine should be called after PCD is initialized for enabling all 470 PCD engines according to their existing configuration. 471 472 @Param[in] h_FmPcd FM PCD module descriptor. 473 474 @Return E_OK on success; Error code otherwise. 475 476 @Cautions Allowed only following FM_PCD_Init() and when PCD is disabled. 477 *//***************************************************************************/ 478 t_Error FM_PCD_Enable(t_Handle h_FmPcd); 479 480 /**************************************************************************//** 481 @Function FM_PCD_Disable 482 483 @Description This routine may be called when PCD is enabled in order to 484 disable all PCD engines. It may be called 485 only when none of the ports in the system are using the PCD. 486 487 @Param[in] h_FmPcd FM PCD module descriptor. 488 489 @Return E_OK on success; Error code otherwise. 490 491 @Cautions Allowed only following FM_PCD_Init() and when PCD is enabled. 492 *//***************************************************************************/ 493 t_Error FM_PCD_Disable(t_Handle h_FmPcd); 494 495 /**************************************************************************//** 496 @Function FM_PCD_GetCounter 497 498 @Description Reads one of the FM PCD counters. 499 500 @Param[in] h_FmPcd FM PCD module descriptor. 501 @Param[in] counter The requested counter. 502 503 @Return Counter's current value. 504 505 @Cautions Allowed only following FM_PCD_Init(). 506 Note that it is user's responsibility to call this routine only 507 for enabled counters, and there will be no indication if a 508 disabled counter is accessed. 509 *//***************************************************************************/ 510 uint32_t FM_PCD_GetCounter(t_Handle h_FmPcd, e_FmPcdCounters counter); 511 512 /**************************************************************************//** 513 @Function FM_PCD_PrsLoadSw 514 515 @Description This routine may be called in order to load software parsing code. 516 517 518 @Param[in] h_FmPcd FM PCD module descriptor. 519 @Param[in] p_SwPrs A pointer to a structure of software 520 parser parameters, including the software 521 parser image. 522 523 @Return E_OK on success; Error code otherwise. 524 525 @Cautions Allowed only following FM_PCD_Init() and when PCD is disabled. 526 This routine should NOT be called from guest-partition 527 (i.e. guestId != NCSW_MASTER_ID) 528 *//***************************************************************************/ 529 t_Error FM_PCD_PrsLoadSw(t_Handle h_FmPcd, t_FmPcdPrsSwParams *p_SwPrs); 530 531 /**************************************************************************//** 532 @Function FM_PCD_SetAdvancedOffloadSupport 533 534 @Description This routine must be called in order to support the following features: 535 IP-fragmentation, IP-reassembly, IPsec, Header-manipulation, frame-replicator. 536 537 @Param[in] h_FmPcd FM PCD module descriptor. 538 539 @Return E_OK on success; Error code otherwise. 540 541 @Cautions Allowed only following FM_PCD_Init() and when PCD is disabled. 542 This routine should NOT be called from guest-partition 543 (i.e. guestId != NCSW_MASTER_ID) 544 *//***************************************************************************/ 545 t_Error FM_PCD_SetAdvancedOffloadSupport(t_Handle h_FmPcd); 546 547 /**************************************************************************//** 548 @Function FM_PCD_KgSetDfltValue 549 550 @Description Calling this routine sets a global default value to be used 551 by the KeyGen when parser does not recognize a required 552 field/header. 553 By default default values are 0. 554 555 @Param[in] h_FmPcd FM PCD module descriptor. 556 @Param[in] valueId 0,1 - one of 2 global default values. 557 @Param[in] value The requested default value. 558 559 @Return E_OK on success; Error code otherwise. 560 561 @Cautions Allowed only following FM_PCD_Init() and when PCD is disabled. 562 This routine should NOT be called from guest-partition 563 (i.e. guestId != NCSW_MASTER_ID) 564 *//***************************************************************************/ 565 t_Error FM_PCD_KgSetDfltValue(t_Handle h_FmPcd, uint8_t valueId, uint32_t value); 566 567 /**************************************************************************//** 568 @Function FM_PCD_KgSetAdditionalDataAfterParsing 569 570 @Description Calling this routine allows the KeyGen to access data past 571 the parser finishing point. 572 573 @Param[in] h_FmPcd FM PCD module descriptor. 574 @Param[in] payloadOffset the number of bytes beyond the parser location. 575 576 @Return E_OK on success; Error code otherwise. 577 578 @Cautions Allowed only following FM_PCD_Init() and when PCD is disabled. 579 This routine should NOT be called from guest-partition 580 (i.e. guestId != NCSW_MASTER_ID) 581 *//***************************************************************************/ 582 t_Error FM_PCD_KgSetAdditionalDataAfterParsing(t_Handle h_FmPcd, uint8_t payloadOffset); 583 584 /**************************************************************************//** 585 @Function FM_PCD_SetException 586 587 @Description Calling this routine enables/disables PCD interrupts. 588 589 @Param[in] h_FmPcd FM PCD module descriptor. 590 @Param[in] exception The exception to be selected. 591 @Param[in] enable TRUE to enable interrupt, FALSE to mask it. 592 593 @Return E_OK on success; Error code otherwise. 594 595 @Cautions Allowed only following FM_PCD_Init(). 596 This routine should NOT be called from guest-partition 597 (i.e. guestId != NCSW_MASTER_ID) 598 *//***************************************************************************/ 599 t_Error FM_PCD_SetException(t_Handle h_FmPcd, e_FmPcdExceptions exception, bool enable); 600 601 /**************************************************************************//** 602 @Function FM_PCD_ModifyCounter 603 604 @Description Sets a value to an enabled counter. Use "0" to reset the counter. 605 606 @Param[in] h_FmPcd FM PCD module descriptor. 607 @Param[in] counter The requested counter. 608 @Param[in] value The requested value to be written into the counter. 609 610 @Return E_OK on success; Error code otherwise. 611 612 @Cautions Allowed only following FM_PCD_Init(). 613 This routine should NOT be called from guest-partition 614 (i.e. guestId != NCSW_MASTER_ID) 615 *//***************************************************************************/ 616 t_Error FM_PCD_ModifyCounter(t_Handle h_FmPcd, e_FmPcdCounters counter, uint32_t value); 617 618 /**************************************************************************//** 619 @Function FM_PCD_SetPlcrStatistics 620 621 @Description This routine may be used to enable/disable policer statistics 622 counter. By default the statistics is enabled. 623 624 @Param[in] h_FmPcd FM PCD module descriptor 625 @Param[in] enable TRUE to enable, FALSE to disable. 626 627 @Return E_OK on success; Error code otherwise. 628 629 @Cautions Allowed only following FM_PCD_Init(). 630 This routine should NOT be called from guest-partition 631 (i.e. guestId != NCSW_MASTER_ID) 632 *//***************************************************************************/ 633 t_Error FM_PCD_SetPlcrStatistics(t_Handle h_FmPcd, bool enable); 634 635 /**************************************************************************//** 636 @Function FM_PCD_SetPrsStatistics 637 638 @Description Defines whether to gather parser statistics including all ports. 639 640 @Param[in] h_FmPcd FM PCD module descriptor. 641 @Param[in] enable TRUE to enable, FALSE to disable. 642 643 @Return None 644 645 @Cautions Allowed only following FM_PCD_Init(). 646 This routine should NOT be called from guest-partition 647 (i.e. guestId != NCSW_MASTER_ID) 648 *//***************************************************************************/ 649 void FM_PCD_SetPrsStatistics(t_Handle h_FmPcd, bool enable); 650 651 /**************************************************************************//** 652 @Function FM_PCD_HcTxConf 653 654 @Description This routine should be called to confirm frames that were 655 received on the HC confirmation queue. 656 657 @Param[in] h_FmPcd A handle to an FM PCD Module. 658 @Param[in] p_Fd Frame descriptor of the received frame. 659 660 @Cautions Allowed only following FM_PCD_Init(). Allowed only if 'useHostCommand' 661 option was selected in the initialization. 662 *//***************************************************************************/ 663 void FM_PCD_HcTxConf(t_Handle h_FmPcd, t_DpaaFD *p_Fd); 664 665 /**************************************************************************//* 666 @Function FM_PCD_ForceIntr 667 668 @Description Causes an interrupt event on the requested source. 669 670 @Param[in] h_FmPcd FM PCD module descriptor. 671 @Param[in] exception An exception to be forced. 672 673 @Return E_OK on success; Error code if the exception is not enabled, 674 or is not able to create interrupt. 675 676 @Cautions Allowed only following FM_PCD_Init(). 677 This routine should NOT be called from guest-partition 678 (i.e. guestId != NCSW_MASTER_ID) 679 *//***************************************************************************/ 680 t_Error FM_PCD_ForceIntr (t_Handle h_FmPcd, e_FmPcdExceptions exception); 681 682 #if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) 683 /**************************************************************************//** 684 @Function FM_PCD_DumpRegs 685 686 @Description Dumps all PCD registers 687 688 @Param[in] h_FmPcd A handle to an FM PCD Module. 689 690 @Return E_OK on success; Error code otherwise. 691 692 @Cautions Allowed only following FM_PCD_Init(). 693 NOTE: this routine may be called only for FM in master mode 694 (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers 695 are mapped. 696 *//***************************************************************************/ 697 t_Error FM_PCD_DumpRegs(t_Handle h_FmPcd); 698 699 /**************************************************************************//** 700 @Function FM_PCD_KgDumpRegs 701 702 @Description Dumps all PCD KG registers 703 704 @Param[in] h_FmPcd A handle to an FM PCD Module. 705 706 @Return E_OK on success; Error code otherwise. 707 708 @Cautions Allowed only following FM_PCD_Init(). 709 NOTE: this routine may be called only for FM in master mode 710 (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers 711 are mapped. 712 *//***************************************************************************/ 713 t_Error FM_PCD_KgDumpRegs(t_Handle h_FmPcd); 714 715 /**************************************************************************//** 716 @Function FM_PCD_PlcrDumpRegs 717 718 @Description Dumps all PCD Policer registers 719 720 @Param[in] h_FmPcd A handle to an FM PCD Module. 721 722 @Return E_OK on success; Error code otherwise. 723 724 @Cautions Allowed only following FM_PCD_Init(). 725 NOTE: this routine may be called only for FM in master mode 726 (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers 727 are mapped. 728 *//***************************************************************************/ 729 t_Error FM_PCD_PlcrDumpRegs(t_Handle h_FmPcd); 730 731 /**************************************************************************//** 732 @Function FM_PCD_PlcrProfileDumpRegs 733 734 @Description Dumps all PCD Policer profile registers 735 736 @Param[in] h_Profile A handle to a Policer profile. 737 738 @Return E_OK on success; Error code otherwise. 739 740 @Cautions Allowed only following FM_PCD_Init(). 741 NOTE: this routine may be called only for FM in master mode 742 (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers 743 are mapped. 744 *//***************************************************************************/ 745 t_Error FM_PCD_PlcrProfileDumpRegs(t_Handle h_Profile); 746 747 /**************************************************************************//** 748 @Function FM_PCD_PrsDumpRegs 749 750 @Description Dumps all PCD Parser registers 751 752 @Param[in] h_FmPcd A handle to an FM PCD Module. 753 754 @Return E_OK on success; Error code otherwise. 755 756 @Cautions Allowed only following FM_PCD_Init(). 757 NOTE: this routine may be called only for FM in master mode 758 (i.e. 'guestId'=NCSW_MASTER_ID) or in a case that the registers 759 are mapped. 760 *//***************************************************************************/ 761 t_Error FM_PCD_PrsDumpRegs(t_Handle h_FmPcd); 762 763 /**************************************************************************//** 764 @Function FM_PCD_HcDumpRegs 765 766 @Description Dumps HC Port registers 767 768 @Param[in] h_FmPcd A handle to an FM PCD Module. 769 770 @Return E_OK on success; Error code otherwise. 771 772 @Cautions Allowed only following FM_PCD_Init(). 773 NOTE: this routine may be called only for FM in master mode 774 (i.e. 'guestId'=NCSW_MASTER_ID). 775 *//***************************************************************************/ 776 t_Error FM_PCD_HcDumpRegs(t_Handle h_FmPcd); 777 #endif /* (defined(DEBUG_ERRORS) && ... */ 778 779 780 781 /**************************************************************************//** 782 KeyGen FM_PCD_Runtime_build_grp FM PCD Runtime Building Unit 783 784 @Description Frame Manager PCD Runtime Building API 785 786 This group contains routines for setting, deleting and modifying 787 PCD resources, for defining the total PCD tree. 788 @{ 789 *//***************************************************************************/ 790 791 /**************************************************************************//** 792 @Collection Definitions of coarse classification 793 parameters as required by KeyGen (when coarse classification 794 is the next engine after this scheme). 795 *//***************************************************************************/ 796 #define FM_PCD_MAX_NUM_OF_CC_TREES 8 797 #define FM_PCD_MAX_NUM_OF_CC_GROUPS 16 798 #define FM_PCD_MAX_NUM_OF_CC_UNITS 4 799 #define FM_PCD_MAX_NUM_OF_KEYS 256 800 #define FM_PCD_MAX_NUM_OF_FLOWS (4*KILOBYTE) 801 #define FM_PCD_MAX_SIZE_OF_KEY 56 802 #define FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP 16 803 #define FM_PCD_LAST_KEY_INDEX 0xffff 804 805 #define FM_PCD_MAX_NUM_OF_CC_NODES 255 /* Obsolete, not used - will be removed in the future */ 806 /* @} */ 807 808 /**************************************************************************//** 809 @Collection A set of definitions to allow protocol 810 special option description. 811 *//***************************************************************************/ 812 typedef uint32_t protocolOpt_t; /**< A general type to define a protocol option. */ 813 814 typedef protocolOpt_t ethProtocolOpt_t; /**< Ethernet protocol options. */ 815 #define ETH_BROADCAST 0x80000000 /**< Ethernet Broadcast. */ 816 #define ETH_MULTICAST 0x40000000 /**< Ethernet Multicast. */ 817 818 typedef protocolOpt_t vlanProtocolOpt_t; /**< VLAN protocol options. */ 819 #define VLAN_STACKED 0x20000000 /**< Stacked VLAN. */ 820 821 typedef protocolOpt_t mplsProtocolOpt_t; /**< MPLS protocol options. */ 822 #define MPLS_STACKED 0x10000000 /**< Stacked MPLS. */ 823 824 typedef protocolOpt_t ipv4ProtocolOpt_t; /**< IPv4 protocol options. */ 825 #define IPV4_BROADCAST_1 0x08000000 /**< IPv4 Broadcast. */ 826 #define IPV4_MULTICAST_1 0x04000000 /**< IPv4 Multicast. */ 827 #define IPV4_UNICAST_2 0x02000000 /**< Tunneled IPv4 - Unicast. */ 828 #define IPV4_MULTICAST_BROADCAST_2 0x01000000 /**< Tunneled IPv4 - Broadcast/Multicast. */ 829 830 #define IPV4_FRAG_1 0x00000008 /**< IPV4 reassembly option. 831 IPV4 Reassembly manipulation requires network 832 environment with IPV4 header and IPV4_FRAG_1 option */ 833 834 typedef protocolOpt_t ipv6ProtocolOpt_t; /**< IPv6 protocol options. */ 835 #define IPV6_MULTICAST_1 0x00800000 /**< IPv6 Multicast. */ 836 #define IPV6_UNICAST_2 0x00400000 /**< Tunneled IPv6 - Unicast. */ 837 #define IPV6_MULTICAST_2 0x00200000 /**< Tunneled IPv6 - Multicast. */ 838 839 #define IPV6_FRAG_1 0x00000004 /**< IPV6 reassembly option. 840 IPV6 Reassembly manipulation requires network 841 environment with IPV6 header and IPV6_FRAG_1 option; 842 in case where fragment found, the fragment-extension offset 843 may be found at 'shim2' (in parser-result). */ 844 #if (DPAA_VERSION >= 11) 845 typedef protocolOpt_t capwapProtocolOpt_t; /**< CAPWAP protocol options. */ 846 #define CAPWAP_FRAG_1 0x00000008 /**< CAPWAP reassembly option. 847 CAPWAP Reassembly manipulation requires network 848 environment with CAPWAP header and CAPWAP_FRAG_1 option; 849 in case where fragment found, the fragment-extension offset 850 may be found at 'shim2' (in parser-result). */ 851 #endif /* (DPAA_VERSION >= 11) */ 852 853 854 /* @} */ 855 856 #define FM_PCD_MANIP_MAX_HDR_SIZE 256 857 #define FM_PCD_MANIP_DSCP_TO_VLAN_TRANS 64 858 859 /**************************************************************************//** 860 @Collection A set of definitions to support Header Manipulation selection. 861 *//***************************************************************************/ 862 typedef uint32_t hdrManipFlags_t; /**< A general type to define a HMan update command flags. */ 863 864 typedef hdrManipFlags_t ipv4HdrManipUpdateFlags_t; /**< IPv4 protocol HMan update command flags. */ 865 866 #define HDR_MANIP_IPV4_TOS 0x80000000 /**< update TOS with the given value ('tos' field 867 of t_FmPcdManipHdrFieldUpdateIpv4) */ 868 #define HDR_MANIP_IPV4_ID 0x40000000 /**< update IP ID with the given value ('id' field 869 of t_FmPcdManipHdrFieldUpdateIpv4) */ 870 #define HDR_MANIP_IPV4_TTL 0x20000000 /**< Decrement TTL by 1 */ 871 #define HDR_MANIP_IPV4_SRC 0x10000000 /**< update IP source address with the given value 872 ('src' field of t_FmPcdManipHdrFieldUpdateIpv4) */ 873 #define HDR_MANIP_IPV4_DST 0x08000000 /**< update IP destination address with the given value 874 ('dst' field of t_FmPcdManipHdrFieldUpdateIpv4) */ 875 876 typedef hdrManipFlags_t ipv6HdrManipUpdateFlags_t; /**< IPv6 protocol HMan update command flags. */ 877 878 #define HDR_MANIP_IPV6_TC 0x80000000 /**< update Traffic Class address with the given value 879 ('trafficClass' field of t_FmPcdManipHdrFieldUpdateIpv6) */ 880 #define HDR_MANIP_IPV6_HL 0x40000000 /**< Decrement Hop Limit by 1 */ 881 #define HDR_MANIP_IPV6_SRC 0x20000000 /**< update IP source address with the given value 882 ('src' field of t_FmPcdManipHdrFieldUpdateIpv6) */ 883 #define HDR_MANIP_IPV6_DST 0x10000000 /**< update IP destination address with the given value 884 ('dst' field of t_FmPcdManipHdrFieldUpdateIpv6) */ 885 886 typedef hdrManipFlags_t tcpUdpHdrManipUpdateFlags_t;/**< TCP/UDP protocol HMan update command flags. */ 887 888 #define HDR_MANIP_TCP_UDP_SRC 0x80000000 /**< update TCP/UDP source address with the given value 889 ('src' field of t_FmPcdManipHdrFieldUpdateTcpUdp) */ 890 #define HDR_MANIP_TCP_UDP_DST 0x40000000 /**< update TCP/UDP destination address with the given value 891 ('dst' field of t_FmPcdManipHdrFieldUpdateTcpUdp) */ 892 #define HDR_MANIP_TCP_UDP_CHECKSUM 0x20000000 /**< update TCP/UDP checksum */ 893 894 /* @} */ 895 896 /**************************************************************************//** 897 @Description A type used for returning the order of the key extraction. 898 each value in this array represents the index of the extraction 899 command as defined by the user in the initialization extraction array. 900 The valid size of this array is the user define number of extractions 901 required (also marked by the second '0' in this array). 902 *//***************************************************************************/ 903 typedef uint8_t t_FmPcdKgKeyOrder [FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY]; 904 905 /**************************************************************************//** 906 @Description All PCD engines 907 *//***************************************************************************/ 908 typedef enum e_FmPcdEngine { 909 e_FM_PCD_INVALID = 0, /**< Invalid PCD engine */ 910 e_FM_PCD_DONE, /**< No PCD Engine indicated */ 911 e_FM_PCD_KG, /**< KeyGen */ 912 e_FM_PCD_CC, /**< Coarse classifier */ 913 e_FM_PCD_PLCR, /**< Policer */ 914 e_FM_PCD_PRS, /**< Parser */ 915 #if (DPAA_VERSION >= 11) 916 e_FM_PCD_FR, /**< Frame-Replicator */ 917 #endif /* (DPAA_VERSION >= 11) */ 918 e_FM_PCD_HASH /**< Hash table */ 919 } e_FmPcdEngine; 920 921 /**************************************************************************//** 922 @Description Enumeration type for selecting extraction by header types 923 *//***************************************************************************/ 924 typedef enum e_FmPcdExtractByHdrType { 925 e_FM_PCD_EXTRACT_FROM_HDR, /**< Extract bytes from header */ 926 e_FM_PCD_EXTRACT_FROM_FIELD, /**< Extract bytes from header field */ 927 e_FM_PCD_EXTRACT_FULL_FIELD /**< Extract a full field */ 928 } e_FmPcdExtractByHdrType; 929 930 /**************************************************************************//** 931 @Description Enumeration type for selecting extraction source 932 (when it is not the header) 933 *//***************************************************************************/ 934 typedef enum e_FmPcdExtractFrom { 935 e_FM_PCD_EXTRACT_FROM_FRAME_START, /**< KG & CC: Extract from beginning of frame */ 936 e_FM_PCD_EXTRACT_FROM_DFLT_VALUE, /**< KG only: Extract from a default value */ 937 e_FM_PCD_EXTRACT_FROM_CURR_END_OF_PARSE, /**< KG & CC: Extract from the point where parsing had finished */ 938 e_FM_PCD_EXTRACT_FROM_KEY, /**< CC only: Field where saved KEY */ 939 e_FM_PCD_EXTRACT_FROM_HASH, /**< CC only: Field where saved HASH */ 940 e_FM_PCD_EXTRACT_FROM_PARSE_RESULT, /**< KG only: Extract from the parser result */ 941 e_FM_PCD_EXTRACT_FROM_ENQ_FQID, /**< KG & CC: Extract from enqueue FQID */ 942 e_FM_PCD_EXTRACT_FROM_FLOW_ID /**< CC only: Field where saved Dequeue FQID */ 943 } e_FmPcdExtractFrom; 944 945 /**************************************************************************//** 946 @Description Enumeration type for selecting extraction type 947 *//***************************************************************************/ 948 typedef enum e_FmPcdExtractType { 949 e_FM_PCD_EXTRACT_BY_HDR, /**< Extract according to header */ 950 e_FM_PCD_EXTRACT_NON_HDR, /**< Extract from data that is not the header */ 951 e_FM_PCD_KG_EXTRACT_PORT_PRIVATE_INFO /**< Extract private info as specified by user */ 952 } e_FmPcdExtractType; 953 954 /**************************************************************************//** 955 @Description Enumeration type for selecting default extraction value 956 *//***************************************************************************/ 957 typedef enum e_FmPcdKgExtractDfltSelect { 958 e_FM_PCD_KG_DFLT_GBL_0, /**< Default selection is KG register 0 */ 959 e_FM_PCD_KG_DFLT_GBL_1, /**< Default selection is KG register 1 */ 960 e_FM_PCD_KG_DFLT_PRIVATE_0, /**< Default selection is a per scheme register 0 */ 961 e_FM_PCD_KG_DFLT_PRIVATE_1, /**< Default selection is a per scheme register 1 */ 962 e_FM_PCD_KG_DFLT_ILLEGAL /**< Illegal selection */ 963 } e_FmPcdKgExtractDfltSelect; 964 965 /**************************************************************************//** 966 @Description Enumeration type defining all default groups - each group shares 967 a default value, one of four user-initialized values. 968 *//***************************************************************************/ 969 typedef enum e_FmPcdKgKnownFieldsDfltTypes { 970 e_FM_PCD_KG_MAC_ADDR, /**< MAC Address */ 971 e_FM_PCD_KG_TCI, /**< TCI field */ 972 e_FM_PCD_KG_ENET_TYPE, /**< ENET Type */ 973 e_FM_PCD_KG_PPP_SESSION_ID, /**< PPP Session id */ 974 e_FM_PCD_KG_PPP_PROTOCOL_ID, /**< PPP Protocol id */ 975 e_FM_PCD_KG_MPLS_LABEL, /**< MPLS label */ 976 e_FM_PCD_KG_IP_ADDR, /**< IP address */ 977 e_FM_PCD_KG_PROTOCOL_TYPE, /**< Protocol type */ 978 e_FM_PCD_KG_IP_TOS_TC, /**< TOS or TC */ 979 e_FM_PCD_KG_IPV6_FLOW_LABEL, /**< IPV6 flow label */ 980 e_FM_PCD_KG_IPSEC_SPI, /**< IPSEC SPI */ 981 e_FM_PCD_KG_L4_PORT, /**< L4 Port */ 982 e_FM_PCD_KG_TCP_FLAG, /**< TCP Flag */ 983 e_FM_PCD_KG_GENERIC_FROM_DATA, /**< grouping implemented by SW, 984 any data extraction that is not the full 985 field described above */ 986 e_FM_PCD_KG_GENERIC_FROM_DATA_NO_V, /**< grouping implemented by SW, 987 any data extraction without validation */ 988 e_FM_PCD_KG_GENERIC_NOT_FROM_DATA /**< grouping implemented by SW, 989 extraction from parser result or 990 direct use of default value */ 991 } e_FmPcdKgKnownFieldsDfltTypes; 992 993 /**************************************************************************//** 994 @Description Enumeration type for defining header index for scenarios with 995 multiple (tunneled) headers 996 *//***************************************************************************/ 997 typedef enum e_FmPcdHdrIndex { 998 e_FM_PCD_HDR_INDEX_NONE = 0, /**< used when multiple headers not used, also 999 to specify regular IP (not tunneled). */ 1000 e_FM_PCD_HDR_INDEX_1, /**< may be used for VLAN, MPLS, tunneled IP */ 1001 e_FM_PCD_HDR_INDEX_2, /**< may be used for MPLS, tunneled IP */ 1002 e_FM_PCD_HDR_INDEX_3, /**< may be used for MPLS */ 1003 e_FM_PCD_HDR_INDEX_LAST = 0xFF /**< may be used for VLAN, MPLS */ 1004 } e_FmPcdHdrIndex; 1005 1006 /**************************************************************************//** 1007 @Description Enumeration type for selecting the policer profile functional type 1008 *//***************************************************************************/ 1009 typedef enum e_FmPcdProfileTypeSelection { 1010 e_FM_PCD_PLCR_PORT_PRIVATE, /**< Port dedicated profile */ 1011 e_FM_PCD_PLCR_SHARED /**< Shared profile (shared within partition) */ 1012 } e_FmPcdProfileTypeSelection; 1013 1014 /**************************************************************************//** 1015 @Description Enumeration type for selecting the policer profile algorithm 1016 *//***************************************************************************/ 1017 typedef enum e_FmPcdPlcrAlgorithmSelection { 1018 e_FM_PCD_PLCR_PASS_THROUGH, /**< Policer pass through */ 1019 e_FM_PCD_PLCR_RFC_2698, /**< Policer algorithm RFC 2698 */ 1020 e_FM_PCD_PLCR_RFC_4115 /**< Policer algorithm RFC 4115 */ 1021 } e_FmPcdPlcrAlgorithmSelection; 1022 1023 /**************************************************************************//** 1024 @Description Enumeration type for selecting a policer profile color mode 1025 *//***************************************************************************/ 1026 typedef enum e_FmPcdPlcrColorMode { 1027 e_FM_PCD_PLCR_COLOR_BLIND, /**< Color blind */ 1028 e_FM_PCD_PLCR_COLOR_AWARE /**< Color aware */ 1029 } e_FmPcdPlcrColorMode; 1030 1031 /**************************************************************************//** 1032 @Description Enumeration type for selecting a policer profile color 1033 *//***************************************************************************/ 1034 typedef enum e_FmPcdPlcrColor { 1035 e_FM_PCD_PLCR_GREEN, /**< Green color code */ 1036 e_FM_PCD_PLCR_YELLOW, /**< Yellow color code */ 1037 e_FM_PCD_PLCR_RED, /**< Red color code */ 1038 e_FM_PCD_PLCR_OVERRIDE /**< Color override code */ 1039 } e_FmPcdPlcrColor; 1040 1041 /**************************************************************************//** 1042 @Description Enumeration type for selecting the policer profile packet frame length selector 1043 *//***************************************************************************/ 1044 typedef enum e_FmPcdPlcrFrameLengthSelect { 1045 e_FM_PCD_PLCR_L2_FRM_LEN, /**< L2 frame length */ 1046 e_FM_PCD_PLCR_L3_FRM_LEN, /**< L3 frame length */ 1047 e_FM_PCD_PLCR_L4_FRM_LEN, /**< L4 frame length */ 1048 e_FM_PCD_PLCR_FULL_FRM_LEN /**< Full frame length */ 1049 } e_FmPcdPlcrFrameLengthSelect; 1050 1051 /**************************************************************************//** 1052 @Description Enumeration type for selecting roll-back frame 1053 *//***************************************************************************/ 1054 typedef enum e_FmPcdPlcrRollBackFrameSelect { 1055 e_FM_PCD_PLCR_ROLLBACK_L2_FRM_LEN, /**< Roll-back L2 frame length */ 1056 e_FM_PCD_PLCR_ROLLBACK_FULL_FRM_LEN /**< Roll-back Full frame length */ 1057 } e_FmPcdPlcrRollBackFrameSelect; 1058 1059 /**************************************************************************//** 1060 @Description Enumeration type for selecting the policer profile packet or byte mode 1061 *//***************************************************************************/ 1062 typedef enum e_FmPcdPlcrRateMode { 1063 e_FM_PCD_PLCR_BYTE_MODE, /**< Byte mode */ 1064 e_FM_PCD_PLCR_PACKET_MODE /**< Packet mode */ 1065 } e_FmPcdPlcrRateMode; 1066 1067 /**************************************************************************//** 1068 @Description Enumeration type for defining action of frame 1069 *//***************************************************************************/ 1070 typedef enum e_FmPcdDoneAction { 1071 e_FM_PCD_ENQ_FRAME = 0, /**< Enqueue frame */ 1072 e_FM_PCD_DROP_FRAME /**< Mark this frame as error frame and continue 1073 to error flow; 'FM_PORT_FRM_ERR_CLS_DISCARD' 1074 flag will be set for this frame. */ 1075 } e_FmPcdDoneAction; 1076 1077 /**************************************************************************//** 1078 @Description Enumeration type for selecting the policer counter 1079 *//***************************************************************************/ 1080 typedef enum e_FmPcdPlcrProfileCounters { 1081 e_FM_PCD_PLCR_PROFILE_GREEN_PACKET_TOTAL_COUNTER, /**< Green packets counter */ 1082 e_FM_PCD_PLCR_PROFILE_YELLOW_PACKET_TOTAL_COUNTER, /**< Yellow packets counter */ 1083 e_FM_PCD_PLCR_PROFILE_RED_PACKET_TOTAL_COUNTER, /**< Red packets counter */ 1084 e_FM_PCD_PLCR_PROFILE_RECOLOURED_YELLOW_PACKET_TOTAL_COUNTER, /**< Recolored yellow packets counter */ 1085 e_FM_PCD_PLCR_PROFILE_RECOLOURED_RED_PACKET_TOTAL_COUNTER /**< Recolored red packets counter */ 1086 } e_FmPcdPlcrProfileCounters; 1087 1088 /**************************************************************************//** 1089 @Description Enumeration type for selecting the PCD action after extraction 1090 *//***************************************************************************/ 1091 typedef enum e_FmPcdAction { 1092 e_FM_PCD_ACTION_NONE, /**< NONE */ 1093 e_FM_PCD_ACTION_EXACT_MATCH, /**< Exact match on the selected extraction */ 1094 e_FM_PCD_ACTION_INDEXED_LOOKUP /**< Indexed lookup on the selected extraction */ 1095 } e_FmPcdAction; 1096 1097 /**************************************************************************//** 1098 @Description Enumeration type for selecting type of insert manipulation 1099 *//***************************************************************************/ 1100 typedef enum e_FmPcdManipHdrInsrtType { 1101 e_FM_PCD_MANIP_INSRT_GENERIC, /**< Insert according to offset & size */ 1102 e_FM_PCD_MANIP_INSRT_BY_HDR, /**< Insert according to protocol */ 1103 #if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) 1104 e_FM_PCD_MANIP_INSRT_BY_TEMPLATE /**< Insert template to start of frame */ 1105 #endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */ 1106 } e_FmPcdManipHdrInsrtType; 1107 1108 /**************************************************************************//** 1109 @Description Enumeration type for selecting type of remove manipulation 1110 *//***************************************************************************/ 1111 typedef enum e_FmPcdManipHdrRmvType { 1112 e_FM_PCD_MANIP_RMV_GENERIC, /**< Remove according to offset & size */ 1113 e_FM_PCD_MANIP_RMV_BY_HDR /**< Remove according to offset & size */ 1114 } e_FmPcdManipHdrRmvType; 1115 1116 /**************************************************************************//** 1117 @Description Enumeration type for selecting specific L2 fields removal 1118 *//***************************************************************************/ 1119 typedef enum e_FmPcdManipHdrRmvSpecificL2 { 1120 e_FM_PCD_MANIP_HDR_RMV_ETHERNET, /**< Ethernet/802.3 MAC */ 1121 e_FM_PCD_MANIP_HDR_RMV_STACKED_QTAGS, /**< stacked QTags */ 1122 e_FM_PCD_MANIP_HDR_RMV_ETHERNET_AND_MPLS, /**< MPLS and Ethernet/802.3 MAC header until 1123 the header which follows the MPLS header */ 1124 e_FM_PCD_MANIP_HDR_RMV_MPLS, /**< Remove MPLS header (Unlimited MPLS labels) */ 1125 e_FM_PCD_MANIP_HDR_RMV_PPPOE /**< Remove the PPPoE header and PPP protocol field. */ 1126 } e_FmPcdManipHdrRmvSpecificL2; 1127 1128 /**************************************************************************//** 1129 @Description Enumeration type for selecting specific fields updates 1130 *//***************************************************************************/ 1131 typedef enum e_FmPcdManipHdrFieldUpdateType { 1132 e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN, /**< VLAN updates */ 1133 e_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4, /**< IPV4 updates */ 1134 e_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6, /**< IPV6 updates */ 1135 e_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP, /**< TCP_UDP updates */ 1136 } e_FmPcdManipHdrFieldUpdateType; 1137 1138 /**************************************************************************//** 1139 @Description Enumeration type for selecting VLAN updates 1140 *//***************************************************************************/ 1141 typedef enum e_FmPcdManipHdrFieldUpdateVlan { 1142 e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_VPRI, /**< Replace VPri of outer most VLAN tag. */ 1143 e_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN /**< DSCP to VLAN priority bits translation */ 1144 } e_FmPcdManipHdrFieldUpdateVlan; 1145 1146 /**************************************************************************//** 1147 @Description Enumeration type for selecting specific L2 header insertion 1148 *//***************************************************************************/ 1149 typedef enum e_FmPcdManipHdrInsrtSpecificL2 { 1150 e_FM_PCD_MANIP_HDR_INSRT_MPLS, /**< Insert MPLS header (Unlimited MPLS labels) */ 1151 e_FM_PCD_MANIP_HDR_INSRT_PPPOE /**< Insert PPPOE */ 1152 } e_FmPcdManipHdrInsrtSpecificL2; 1153 1154 #if (DPAA_VERSION >= 11) 1155 /**************************************************************************//** 1156 @Description Enumeration type for selecting QoS mapping mode 1157 1158 Note: In all cases except 'e_FM_PCD_MANIP_HDR_QOS_MAPPING_NONE' 1159 User should instruct the port to read the hash-result 1160 *//***************************************************************************/ 1161 typedef enum e_FmPcdManipHdrQosMappingMode { 1162 e_FM_PCD_MANIP_HDR_QOS_MAPPING_NONE = 0, /**< No mapping, QoS field will not be changed */ 1163 e_FM_PCD_MANIP_HDR_QOS_MAPPING_AS_IS, /**< QoS field will be overwritten by the last byte in the hash-result. */ 1164 } e_FmPcdManipHdrQosMappingMode; 1165 1166 /**************************************************************************//** 1167 @Description Enumeration type for selecting QoS source 1168 1169 Note: In all cases except 'e_FM_PCD_MANIP_HDR_QOS_SRC_NONE' 1170 User should left room for the hash-result on input/output buffer 1171 and instruct the port to read/write the hash-result to the buffer (RPD should be set) 1172 *//***************************************************************************/ 1173 typedef enum e_FmPcdManipHdrQosSrc { 1174 e_FM_PCD_MANIP_HDR_QOS_SRC_NONE = 0, /**< TODO */ 1175 e_FM_PCD_MANIP_HDR_QOS_SRC_USER_DEFINED, /**< QoS will be taken from the last byte in the hash-result. */ 1176 } e_FmPcdManipHdrQosSrc; 1177 #endif /* (DPAA_VERSION >= 11) */ 1178 1179 /**************************************************************************//** 1180 @Description Enumeration type for selecting type of header insertion 1181 *//***************************************************************************/ 1182 typedef enum e_FmPcdManipHdrInsrtByHdrType { 1183 e_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2, /**< Specific L2 fields insertion */ 1184 #if (DPAA_VERSION >= 11) 1185 e_FM_PCD_MANIP_INSRT_BY_HDR_IP, /**< IP insertion */ 1186 e_FM_PCD_MANIP_INSRT_BY_HDR_UDP, /**< UDP insertion */ 1187 e_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE, /**< UDP lite insertion */ 1188 e_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP /**< CAPWAP insertion */ 1189 #endif /* (DPAA_VERSION >= 11) */ 1190 } e_FmPcdManipHdrInsrtByHdrType; 1191 1192 /**************************************************************************//** 1193 @Description Enumeration type for selecting specific customCommand 1194 *//***************************************************************************/ 1195 typedef enum e_FmPcdManipHdrCustomType { 1196 e_FM_PCD_MANIP_HDR_CUSTOM_IP_REPLACE, /**< Replace IPv4/IPv6 */ 1197 e_FM_PCD_MANIP_HDR_CUSTOM_GEN_FIELD_REPLACE, /**< Replace IPv4/IPv6 */ 1198 } e_FmPcdManipHdrCustomType; 1199 1200 /**************************************************************************//** 1201 @Description Enumeration type for selecting specific customCommand 1202 *//***************************************************************************/ 1203 typedef enum e_FmPcdManipHdrCustomIpReplace { 1204 e_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV4_BY_IPV6, /**< Replace IPv4 by IPv6 */ 1205 e_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4 /**< Replace IPv6 by IPv4 */ 1206 } e_FmPcdManipHdrCustomIpReplace; 1207 1208 /**************************************************************************//** 1209 @Description Enumeration type for selecting type of header removal 1210 *//***************************************************************************/ 1211 typedef enum e_FmPcdManipHdrRmvByHdrType { 1212 e_FM_PCD_MANIP_RMV_BY_HDR_SPECIFIC_L2 = 0, /**< Specific L2 fields removal */ 1213 #if (DPAA_VERSION >= 11) 1214 e_FM_PCD_MANIP_RMV_BY_HDR_CAPWAP, /**< CAPWAP removal */ 1215 #endif /* (DPAA_VERSION >= 11) */ 1216 #if (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) 1217 e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START, /**< Locate from data that is not the header */ 1218 #endif /* (DPAA_VERSION >= 11) || ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */ 1219 } e_FmPcdManipHdrRmvByHdrType; 1220 1221 /**************************************************************************//** 1222 @Description Enumeration type for selecting type of timeout mode 1223 *//***************************************************************************/ 1224 typedef enum e_FmPcdManipReassemTimeOutMode { 1225 e_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAMES, /**< Limits the time of the reassembly process 1226 from the first fragment to the last */ 1227 e_FM_PCD_MANIP_TIME_OUT_BETWEEN_FRAG /**< Limits the time of receiving the fragment */ 1228 } e_FmPcdManipReassemTimeOutMode; 1229 1230 /**************************************************************************//** 1231 @Description Enumeration type for selecting type of WaysNumber mode 1232 *//***************************************************************************/ 1233 typedef enum e_FmPcdManipReassemWaysNumber { 1234 e_FM_PCD_MANIP_ONE_WAY_HASH = 1, /**< One way hash */ 1235 e_FM_PCD_MANIP_TWO_WAYS_HASH, /**< Two ways hash */ 1236 e_FM_PCD_MANIP_THREE_WAYS_HASH, /**< Three ways hash */ 1237 e_FM_PCD_MANIP_FOUR_WAYS_HASH, /**< Four ways hash */ 1238 e_FM_PCD_MANIP_FIVE_WAYS_HASH, /**< Five ways hash */ 1239 e_FM_PCD_MANIP_SIX_WAYS_HASH, /**< Six ways hash */ 1240 e_FM_PCD_MANIP_SEVEN_WAYS_HASH, /**< Seven ways hash */ 1241 e_FM_PCD_MANIP_EIGHT_WAYS_HASH /**< Eight ways hash */ 1242 } e_FmPcdManipReassemWaysNumber; 1243 1244 #if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) 1245 /**************************************************************************//** 1246 @Description Enumeration type for selecting type of statistics mode 1247 *//***************************************************************************/ 1248 typedef enum e_FmPcdStatsType { 1249 e_FM_PCD_STATS_PER_FLOWID = 0 /**< Flow ID is used as index for getting statistics */ 1250 } e_FmPcdStatsType; 1251 #endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */ 1252 1253 /**************************************************************************//** 1254 @Description Enumeration type for selecting manipulation type 1255 *//***************************************************************************/ 1256 typedef enum e_FmPcdManipType { 1257 e_FM_PCD_MANIP_HDR = 0, /**< Header manipulation */ 1258 e_FM_PCD_MANIP_REASSEM, /**< Reassembly */ 1259 e_FM_PCD_MANIP_FRAG, /**< Fragmentation */ 1260 e_FM_PCD_MANIP_SPECIAL_OFFLOAD /**< Special Offloading */ 1261 } e_FmPcdManipType; 1262 1263 /**************************************************************************//** 1264 @Description Enumeration type for selecting type of statistics mode 1265 *//***************************************************************************/ 1266 typedef enum e_FmPcdCcStatsMode { 1267 e_FM_PCD_CC_STATS_MODE_NONE = 0, /**< No statistics support */ 1268 e_FM_PCD_CC_STATS_MODE_FRAME, /**< Frame count statistics */ 1269 e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME, /**< Byte and frame count statistics */ 1270 #if (DPAA_VERSION >= 11) 1271 e_FM_PCD_CC_STATS_MODE_RMON, /**< Byte and frame length range count statistics; 1272 This mode is supported only on B4860 device */ 1273 #endif /* (DPAA_VERSION >= 11) */ 1274 } e_FmPcdCcStatsMode; 1275 1276 /**************************************************************************//** 1277 @Description Enumeration type for determining the action in case an IP packet 1278 is larger than MTU but its DF (Don't Fragment) bit is set. 1279 *//***************************************************************************/ 1280 typedef enum e_FmPcdManipDontFragAction { 1281 e_FM_PCD_MANIP_DISCARD_PACKET = 0, /**< Discard packet */ 1282 e_FM_PCD_MANIP_ENQ_TO_ERR_Q_OR_DISCARD_PACKET = e_FM_PCD_MANIP_DISCARD_PACKET, 1283 /**< Obsolete, cannot enqueue to error queue; 1284 In practice, selects to discard packets; 1285 Will be removed in the future */ 1286 e_FM_PCD_MANIP_FRAGMENT_PACKET, /**< Fragment packet and continue normal processing */ 1287 e_FM_PCD_MANIP_CONTINUE_WITHOUT_FRAG /**< Continue normal processing without fragmenting the packet */ 1288 } e_FmPcdManipDontFragAction; 1289 1290 /**************************************************************************//** 1291 @Description Enumeration type for selecting type of special offload manipulation 1292 *//***************************************************************************/ 1293 typedef enum e_FmPcdManipSpecialOffloadType { 1294 e_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC, /**< IPSec offload manipulation */ 1295 #if (DPAA_VERSION >= 11) 1296 e_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP /**< CAPWAP offload manipulation */ 1297 #endif /* (DPAA_VERSION >= 11) */ 1298 } e_FmPcdManipSpecialOffloadType; 1299 1300 1301 /**************************************************************************//** 1302 @Description A Union of protocol dependent special options 1303 *//***************************************************************************/ 1304 typedef union u_FmPcdHdrProtocolOpt { 1305 ethProtocolOpt_t ethOpt; /**< Ethernet options */ 1306 vlanProtocolOpt_t vlanOpt; /**< VLAN options */ 1307 mplsProtocolOpt_t mplsOpt; /**< MPLS options */ 1308 ipv4ProtocolOpt_t ipv4Opt; /**< IPv4 options */ 1309 ipv6ProtocolOpt_t ipv6Opt; /**< IPv6 options */ 1310 #if (DPAA_VERSION >= 11) 1311 capwapProtocolOpt_t capwapOpt; /**< CAPWAP options */ 1312 #endif /* (DPAA_VERSION >= 11) */ 1313 } u_FmPcdHdrProtocolOpt; 1314 1315 /**************************************************************************//** 1316 @Description A union holding protocol fields 1317 1318 1319 Fields supported as "full fields": 1320 HEADER_TYPE_ETH: 1321 NET_HEADER_FIELD_ETH_DA 1322 NET_HEADER_FIELD_ETH_SA 1323 NET_HEADER_FIELD_ETH_TYPE 1324 1325 HEADER_TYPE_LLC_SNAP: 1326 NET_HEADER_FIELD_LLC_SNAP_TYPE 1327 1328 HEADER_TYPE_VLAN: 1329 NET_HEADER_FIELD_VLAN_TCI 1330 (index may apply: 1331 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1, 1332 e_FM_PCD_HDR_INDEX_LAST) 1333 1334 HEADER_TYPE_MPLS: 1335 NET_HEADER_FIELD_MPLS_LABEL_STACK 1336 (index may apply: 1337 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1, 1338 e_FM_PCD_HDR_INDEX_2, 1339 e_FM_PCD_HDR_INDEX_LAST) 1340 1341 HEADER_TYPE_IPv4: 1342 NET_HEADER_FIELD_IPv4_SRC_IP 1343 NET_HEADER_FIELD_IPv4_DST_IP 1344 NET_HEADER_FIELD_IPv4_PROTO 1345 NET_HEADER_FIELD_IPv4_TOS 1346 (index may apply: 1347 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1, 1348 e_FM_PCD_HDR_INDEX_2/e_FM_PCD_HDR_INDEX_LAST) 1349 1350 HEADER_TYPE_IPv6: 1351 NET_HEADER_FIELD_IPv6_SRC_IP 1352 NET_HEADER_FIELD_IPv6_DST_IP 1353 NET_HEADER_FIELD_IPv6_NEXT_HDR 1354 NET_HEADER_FIELD_IPv6_VER | NET_HEADER_FIELD_IPv6_FL | NET_HEADER_FIELD_IPv6_TC (must come together!) 1355 (index may apply: 1356 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1, 1357 e_FM_PCD_HDR_INDEX_2/e_FM_PCD_HDR_INDEX_LAST) 1358 1359 (Note that starting from DPAA 1-1, NET_HEADER_FIELD_IPv6_NEXT_HDR applies to 1360 the last next header indication, meaning the next L4, which may be 1361 present at the Ipv6 last extension. On earlier revisions this field 1362 applies to the Next-Header field of the main IPv6 header) 1363 1364 HEADER_TYPE_IP: 1365 NET_HEADER_FIELD_IP_PROTO 1366 (index may apply: 1367 e_FM_PCD_HDR_INDEX_LAST) 1368 NET_HEADER_FIELD_IP_DSCP 1369 (index may apply: 1370 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1) 1371 HEADER_TYPE_GRE: 1372 NET_HEADER_FIELD_GRE_TYPE 1373 1374 HEADER_TYPE_MINENCAP 1375 NET_HEADER_FIELD_MINENCAP_SRC_IP 1376 NET_HEADER_FIELD_MINENCAP_DST_IP 1377 NET_HEADER_FIELD_MINENCAP_TYPE 1378 1379 HEADER_TYPE_TCP: 1380 NET_HEADER_FIELD_TCP_PORT_SRC 1381 NET_HEADER_FIELD_TCP_PORT_DST 1382 NET_HEADER_FIELD_TCP_FLAGS 1383 1384 HEADER_TYPE_UDP: 1385 NET_HEADER_FIELD_UDP_PORT_SRC 1386 NET_HEADER_FIELD_UDP_PORT_DST 1387 1388 HEADER_TYPE_UDP_LITE: 1389 NET_HEADER_FIELD_UDP_LITE_PORT_SRC 1390 NET_HEADER_FIELD_UDP_LITE_PORT_DST 1391 1392 HEADER_TYPE_IPSEC_AH: 1393 NET_HEADER_FIELD_IPSEC_AH_SPI 1394 NET_HEADER_FIELD_IPSEC_AH_NH 1395 1396 HEADER_TYPE_IPSEC_ESP: 1397 NET_HEADER_FIELD_IPSEC_ESP_SPI 1398 1399 HEADER_TYPE_SCTP: 1400 NET_HEADER_FIELD_SCTP_PORT_SRC 1401 NET_HEADER_FIELD_SCTP_PORT_DST 1402 1403 HEADER_TYPE_DCCP: 1404 NET_HEADER_FIELD_DCCP_PORT_SRC 1405 NET_HEADER_FIELD_DCCP_PORT_DST 1406 1407 HEADER_TYPE_PPPoE: 1408 NET_HEADER_FIELD_PPPoE_PID 1409 NET_HEADER_FIELD_PPPoE_SID 1410 1411 ***************************************************************** 1412 Fields supported as "from fields": 1413 HEADER_TYPE_ETH (with or without validation): 1414 NET_HEADER_FIELD_ETH_TYPE 1415 1416 HEADER_TYPE_VLAN (with or without validation): 1417 NET_HEADER_FIELD_VLAN_TCI 1418 (index may apply: 1419 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1, 1420 e_FM_PCD_HDR_INDEX_LAST) 1421 1422 HEADER_TYPE_IPv4 (without validation): 1423 NET_HEADER_FIELD_IPv4_PROTO 1424 (index may apply: 1425 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1, 1426 e_FM_PCD_HDR_INDEX_2/e_FM_PCD_HDR_INDEX_LAST) 1427 1428 HEADER_TYPE_IPv6 (without validation): 1429 NET_HEADER_FIELD_IPv6_NEXT_HDR 1430 (index may apply: 1431 e_FM_PCD_HDR_INDEX_NONE/e_FM_PCD_HDR_INDEX_1, 1432 e_FM_PCD_HDR_INDEX_2/e_FM_PCD_HDR_INDEX_LAST) 1433 1434 *//***************************************************************************/ 1435 typedef union t_FmPcdFields { 1436 headerFieldEth_t eth; /**< Ethernet */ 1437 headerFieldVlan_t vlan; /**< VLAN */ 1438 headerFieldLlcSnap_t llcSnap; /**< LLC SNAP */ 1439 headerFieldPppoe_t pppoe; /**< PPPoE */ 1440 headerFieldMpls_t mpls; /**< MPLS */ 1441 headerFieldIp_t ip; /**< IP */ 1442 headerFieldIpv4_t ipv4; /**< IPv4 */ 1443 headerFieldIpv6_t ipv6; /**< IPv6 */ 1444 headerFieldUdp_t udp; /**< UDP */ 1445 headerFieldUdpLite_t udpLite; /**< UDP Lite */ 1446 headerFieldTcp_t tcp; /**< TCP */ 1447 headerFieldSctp_t sctp; /**< SCTP */ 1448 headerFieldDccp_t dccp; /**< DCCP */ 1449 headerFieldGre_t gre; /**< GRE */ 1450 headerFieldMinencap_t minencap; /**< Minimal Encapsulation */ 1451 headerFieldIpsecAh_t ipsecAh; /**< IPSec AH */ 1452 headerFieldIpsecEsp_t ipsecEsp; /**< IPSec ESP */ 1453 headerFieldUdpEncapEsp_t udpEncapEsp; /**< UDP Encapsulation ESP */ 1454 } t_FmPcdFields; 1455 1456 /**************************************************************************//** 1457 @Description Parameters for defining header extraction for key generation 1458 *//***************************************************************************/ 1459 typedef struct t_FmPcdFromHdr { 1460 uint8_t size; /**< Size in byte */ 1461 uint8_t offset; /**< Byte offset */ 1462 } t_FmPcdFromHdr; 1463 1464 /**************************************************************************//** 1465 @Description Parameters for defining field extraction for key generation 1466 *//***************************************************************************/ 1467 typedef struct t_FmPcdFromField { 1468 t_FmPcdFields field; /**< Field selection */ 1469 uint8_t size; /**< Size in byte */ 1470 uint8_t offset; /**< Byte offset */ 1471 } t_FmPcdFromField; 1472 1473 /**************************************************************************//** 1474 @Description Parameters for defining a single network environment unit 1475 1476 A distinction unit should be defined if it will later be used 1477 by one or more PCD engines to distinguish between flows. 1478 *//***************************************************************************/ 1479 typedef struct t_FmPcdDistinctionUnit { 1480 struct { 1481 e_NetHeaderType hdr; /**< One of the headers supported by the FM */ 1482 u_FmPcdHdrProtocolOpt opt; /**< Select only one option ! */ 1483 } hdrs[FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS]; 1484 } t_FmPcdDistinctionUnit; 1485 1486 /**************************************************************************//** 1487 @Description Parameters for defining all different distinction units supported 1488 by a specific PCD Network Environment Characteristics module. 1489 1490 Each unit represent a protocol or a group of protocols that may 1491 be used later by the different PCD engines to distinguish 1492 between flows. 1493 *//***************************************************************************/ 1494 typedef struct t_FmPcdNetEnvParams { 1495 uint8_t numOfDistinctionUnits; /**< Number of different units to be identified */ 1496 t_FmPcdDistinctionUnit units[FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS]; /**< An array of numOfDistinctionUnits of the 1497 different units to be identified */ 1498 } t_FmPcdNetEnvParams; 1499 1500 /**************************************************************************//** 1501 @Description Parameters for defining a single extraction action when 1502 creating a key 1503 *//***************************************************************************/ 1504 typedef struct t_FmPcdExtractEntry { 1505 e_FmPcdExtractType type; /**< Extraction type select */ 1506 union { 1507 struct { 1508 e_NetHeaderType hdr; /**< Header selection */ 1509 bool ignoreProtocolValidation; 1510 /**< Ignore protocol validation */ 1511 e_FmPcdHdrIndex hdrIndex; /**< Relevant only for MPLS, VLAN and tunneled 1512 IP. Otherwise should be cleared. */ 1513 e_FmPcdExtractByHdrType type; /**< Header extraction type select */ 1514 union { 1515 t_FmPcdFromHdr fromHdr; /**< Extract bytes from header parameters */ 1516 t_FmPcdFromField fromField; /**< Extract bytes from field parameters */ 1517 t_FmPcdFields fullField; /**< Extract full filed parameters */ 1518 } extractByHdrType; 1519 } extractByHdr; /**< used when type = e_FM_PCD_KG_EXTRACT_BY_HDR */ 1520 struct { 1521 e_FmPcdExtractFrom src; /**< Non-header extraction source */ 1522 e_FmPcdAction action; /**< Relevant for CC Only */ 1523 uint16_t icIndxMask; /**< Relevant only for CC when 1524 action = e_FM_PCD_ACTION_INDEXED_LOOKUP; 1525 Note that the number of bits that are set within 1526 this mask must be log2 of the CC-node 'numOfKeys'. 1527 Note that the mask cannot be set on the lower bits. */ 1528 uint8_t offset; /**< Byte offset */ 1529 uint8_t size; /**< Size in byte */ 1530 } extractNonHdr; /**< used when type = e_FM_PCD_KG_EXTRACT_NON_HDR */ 1531 }; 1532 } t_FmPcdExtractEntry; 1533 1534 /**************************************************************************//** 1535 @Description Parameters for defining masks for each extracted field in the key. 1536 *//***************************************************************************/ 1537 typedef struct t_FmPcdKgExtractMask { 1538 uint8_t extractArrayIndex; /**< Index in the extraction array, as initialized by user */ 1539 uint8_t offset; /**< Byte offset */ 1540 uint8_t mask; /**< A byte mask (selected bits will be used) */ 1541 } t_FmPcdKgExtractMask; 1542 1543 /**************************************************************************//** 1544 @Description Parameters for defining default selection per groups of fields 1545 *//***************************************************************************/ 1546 typedef struct t_FmPcdKgExtractDflt { 1547 e_FmPcdKgKnownFieldsDfltTypes type; /**< Default type select */ 1548 e_FmPcdKgExtractDfltSelect dfltSelect; /**< Default register select */ 1549 } t_FmPcdKgExtractDflt; 1550 1551 /**************************************************************************//** 1552 @Description Parameters for defining key extraction and hashing 1553 *//***************************************************************************/ 1554 typedef struct t_FmPcdKgKeyExtractAndHashParams { 1555 uint32_t privateDflt0; /**< Scheme default register 0 */ 1556 uint32_t privateDflt1; /**< Scheme default register 1 */ 1557 uint8_t numOfUsedExtracts; /**< defines the valid size of the following array */ 1558 t_FmPcdExtractEntry extractArray [FM_PCD_KG_MAX_NUM_OF_EXTRACTS_PER_KEY]; /**< An array of extractions definition. */ 1559 uint8_t numOfUsedDflts; /**< defines the valid size of the following array */ 1560 t_FmPcdKgExtractDflt dflts[FM_PCD_KG_NUM_OF_DEFAULT_GROUPS]; 1561 /**< For each extraction used in this scheme, specify the required 1562 default register to be used when header is not found. 1563 types not specified in this array will get undefined value. */ 1564 uint8_t numOfUsedMasks; /**< defines the valid size of the following array */ 1565 t_FmPcdKgExtractMask masks[FM_PCD_KG_NUM_OF_EXTRACT_MASKS]; 1566 uint8_t hashShift; /**< hash result right shift. Select the 24 bits out of the 64 hash 1567 result. 0 means using the 24 LSB's, otherwise use the 1568 24 LSB's after shifting right.*/ 1569 uint32_t hashDistributionNumOfFqids; /**< must be > 1 and a power of 2. Represents the range 1570 of queues for the key and hash functionality */ 1571 uint8_t hashDistributionFqidsShift; /**< selects the FQID bits that will be effected by the hash */ 1572 bool symmetricHash; /**< TRUE to generate the same hash for frames with swapped source and 1573 destination fields on all layers; If TRUE, driver will check that for 1574 all layers, if SRC extraction is selected, DST extraction must also be 1575 selected, and vice versa. */ 1576 } t_FmPcdKgKeyExtractAndHashParams; 1577 1578 /**************************************************************************//** 1579 @Description Parameters for defining a single FQID mask (extracted OR). 1580 *//***************************************************************************/ 1581 typedef struct t_FmPcdKgExtractedOrParams { 1582 e_FmPcdExtractType type; /**< Extraction type select */ 1583 union { 1584 struct { /**< used when type = e_FM_PCD_KG_EXTRACT_BY_HDR */ 1585 e_NetHeaderType hdr; 1586 e_FmPcdHdrIndex hdrIndex; /**< Relevant only for MPLS, VLAN and tunneled 1587 IP. Otherwise should be cleared.*/ 1588 bool ignoreProtocolValidation; 1589 /**< continue extraction even if protocol is not recognized */ 1590 } extractByHdr; /**< Header to extract by */ 1591 e_FmPcdExtractFrom src; /**< used when type = e_FM_PCD_KG_EXTRACT_NON_HDR */ 1592 }; 1593 uint8_t extractionOffset; /**< Offset for extraction (in bytes). */ 1594 e_FmPcdKgExtractDfltSelect dfltValue; /**< Select register from which extraction is taken if 1595 field not found */ 1596 uint8_t mask; /**< Extraction mask (specified bits are used) */ 1597 uint8_t bitOffsetInFqid; /**< 0-31, Selects which bits of the 24 FQID bits to effect using 1598 the extracted byte; Assume byte is placed as the 8 MSB's in 1599 a 32 bit word where the lower bits 1600 are the FQID; i.e if bitOffsetInFqid=1 than its LSB 1601 will effect the FQID MSB, if bitOffsetInFqid=24 than the 1602 extracted byte will effect the 8 LSB's of the FQID, 1603 if bitOffsetInFqid=31 than the byte's MSB will effect 1604 the FQID's LSB; 0 means - no effect on FQID; 1605 Note that one, and only one of 1606 bitOffsetInFqid or bitOffsetInPlcrProfile must be set (i.e, 1607 extracted byte must effect either FQID or Policer profile).*/ 1608 uint8_t bitOffsetInPlcrProfile; 1609 /**< 0-15, Selects which bits of the 8 policer profile id bits to 1610 effect using the extracted byte; Assume byte is placed 1611 as the 8 MSB's in a 16 bit word where the lower bits 1612 are the policer profile id; i.e if bitOffsetInPlcrProfile=1 1613 than its LSB will effect the profile MSB, if bitOffsetInFqid=8 1614 than the extracted byte will effect the whole policer profile id, 1615 if bitOffsetInFqid=15 than the byte's MSB will effect 1616 the Policer Profile id's LSB; 1617 0 means - no effect on policer profile; Note that one, and only one of 1618 bitOffsetInFqid or bitOffsetInPlcrProfile must be set (i.e, 1619 extracted byte must effect either FQID or Policer profile).*/ 1620 } t_FmPcdKgExtractedOrParams; 1621 1622 /**************************************************************************//** 1623 @Description Parameters for configuring a scheme counter 1624 *//***************************************************************************/ 1625 typedef struct t_FmPcdKgSchemeCounter { 1626 bool update; /**< FALSE to keep the current counter state 1627 and continue from that point, TRUE to update/reset 1628 the counter when the scheme is written. */ 1629 uint32_t value; /**< If update=TRUE, this value will be written into the 1630 counter. clear this field to reset the counter. */ 1631 } t_FmPcdKgSchemeCounter; 1632 1633 /**************************************************************************//** 1634 @Description Parameters for configuring a policer profile for a KeyGen scheme 1635 (when policer is the next engine after this scheme). 1636 *//***************************************************************************/ 1637 typedef struct t_FmPcdKgPlcrProfile { 1638 bool sharedProfile; /**< TRUE if this profile is shared between ports 1639 (managed by master partition); Must not be TRUE 1640 if profile is after Coarse Classification*/ 1641 bool direct; /**< if TRUE, directRelativeProfileId only selects the profile 1642 id, if FALSE fqidOffsetRelativeProfileIdBase is used 1643 together with fqidOffsetShift and numOfProfiles 1644 parameters, to define a range of profiles from 1645 which the KeyGen result will determine the 1646 destination policer profile. */ 1647 union { 1648 uint16_t directRelativeProfileId; /**< Used if 'direct' is TRUE, to select policer profile. 1649 should indicate the policer profile offset within the 1650 port's policer profiles or shared window. */ 1651 struct { 1652 uint8_t fqidOffsetShift; /**< Shift on the KeyGen create FQID offset (i.e. not the 1653 final FQID - without the FQID base). */ 1654 uint8_t fqidOffsetRelativeProfileIdBase; 1655 /**< The base of the FMan Port's relative Storage-Profile ID; 1656 this value will be "OR'ed" with the KeyGen create FQID 1657 offset (i.e. not the final FQID - without the FQID base); 1658 the final result should indicate the Storage-Profile offset 1659 within the FMan Port's relative Storage-Profiles window/ 1660 (or the SHARED window depends on 'sharedProfile'). */ 1661 uint8_t numOfProfiles; /**< Range of profiles starting at base */ 1662 } indirectProfile; /**< Indirect profile parameters */ 1663 } profileSelect; /**< Direct/indirect profile selection and parameters */ 1664 } t_FmPcdKgPlcrProfile; 1665 1666 #if (DPAA_VERSION >= 11) 1667 /**************************************************************************//** 1668 @Description Parameters for configuring a storage profile for a KeyGen scheme. 1669 *//***************************************************************************/ 1670 typedef struct t_FmPcdKgStorageProfile { 1671 bool direct; /**< If TRUE, directRelativeProfileId only selects the 1672 profile id; 1673 If FALSE, fqidOffsetRelativeProfileIdBase is used 1674 together with fqidOffsetShift and numOfProfiles 1675 parameters to define a range of profiles from which 1676 the KeyGen result will determine the destination 1677 storage profile. */ 1678 union { 1679 uint16_t directRelativeProfileId; /**< Used when 'direct' is TRUE, to select a storage profile; 1680 should indicate the storage profile offset within the 1681 port's storage profiles window. */ 1682 struct { 1683 uint8_t fqidOffsetShift; /**< Shift on the KeyGen create FQID offset (i.e. not the 1684 final FQID - without the FQID base). */ 1685 uint8_t fqidOffsetRelativeProfileIdBase; 1686 /**< The base of the FMan Port's relative Storage-Profile ID; 1687 this value will be "OR'ed" with the KeyGen create FQID 1688 offset (i.e. not the final FQID - without the FQID base); 1689 the final result should indicate the Storage-Profile offset 1690 within the FMan Port's relative Storage-Profiles window. */ 1691 uint8_t numOfProfiles; /**< Range of profiles starting at base. */ 1692 } indirectProfile; /**< Indirect profile parameters. */ 1693 } profileSelect; /**< Direct/indirect profile selection and parameters. */ 1694 } t_FmPcdKgStorageProfile; 1695 #endif /* (DPAA_VERSION >= 11) */ 1696 1697 /**************************************************************************//** 1698 @Description Parameters for defining CC as the next engine after KeyGen 1699 *//***************************************************************************/ 1700 typedef struct t_FmPcdKgCc { 1701 t_Handle h_CcTree; /**< A handle to a CC Tree */ 1702 uint8_t grpId; /**< CC group id within the CC tree */ 1703 bool plcrNext; /**< TRUE if after CC, in case of data frame, 1704 policing is required. */ 1705 bool bypassPlcrProfileGeneration; /**< TRUE to bypass KeyGen policer profile generation; 1706 selected profile is the one set at port initialization. */ 1707 t_FmPcdKgPlcrProfile plcrProfile; /**< Valid only if plcrNext = TRUE and 1708 bypassPlcrProfileGeneration = FALSE */ 1709 } t_FmPcdKgCc; 1710 1711 /**************************************************************************//** 1712 @Description Parameters for defining initializing a KeyGen scheme 1713 *//***************************************************************************/ 1714 typedef struct t_FmPcdKgSchemeParams { 1715 bool modify; /**< TRUE to change an existing scheme */ 1716 union 1717 { 1718 uint8_t relativeSchemeId; /**< if modify=FALSE:Partition relative scheme id */ 1719 t_Handle h_Scheme; /**< if modify=TRUE: a handle of the existing scheme */ 1720 } id; 1721 bool alwaysDirect; /**< This scheme is reached only directly, i.e. no need 1722 for match vector; KeyGen will ignore it when matching */ 1723 struct { /**< HL Relevant only if alwaysDirect = FALSE */ 1724 t_Handle h_NetEnv; /**< A handle to the Network environment as returned 1725 by FM_PCD_NetEnvCharacteristicsSet() */ 1726 uint8_t numOfDistinctionUnits; /**< Number of NetEnv units listed in unitIds array */ 1727 uint8_t unitIds[FM_PCD_MAX_NUM_OF_DISTINCTION_UNITS]; 1728 /**< Indexes as passed to SetNetEnvCharacteristics array*/ 1729 } netEnvParams; 1730 bool useHash; /**< use the KeyGen Hash functionality */ 1731 t_FmPcdKgKeyExtractAndHashParams keyExtractAndHashParams; 1732 /**< used only if useHash = TRUE */ 1733 bool bypassFqidGeneration; /**< Normally - FALSE, TRUE to avoid FQID update in the IC; 1734 In such a case FQID after KeyGen will be the default FQID 1735 defined for the relevant port, or the FQID defined by CC 1736 in cases where CC was the previous engine. */ 1737 uint32_t baseFqid; /**< Base FQID; Relevant only if bypassFqidGeneration = FALSE; 1738 If hash is used and an even distribution is expected 1739 according to hashDistributionNumOfFqids, baseFqid must be aligned to 1740 hashDistributionNumOfFqids. */ 1741 uint8_t numOfUsedExtractedOrs; /**< Number of FQID masks listed in extractedOrs array */ 1742 t_FmPcdKgExtractedOrParams extractedOrs[FM_PCD_KG_NUM_OF_GENERIC_REGS]; 1743 /**< FM_PCD_KG_NUM_OF_GENERIC_REGS 1744 registers are shared between qidMasks 1745 functionality and some of the extraction 1746 actions; Normally only some will be used 1747 for qidMask. Driver will return error if 1748 resource is full at initialization time. */ 1749 1750 #if (DPAA_VERSION >= 11) 1751 bool overrideStorageProfile; /**< TRUE if KeyGen override previously decided storage profile */ 1752 t_FmPcdKgStorageProfile storageProfile; /**< Used when overrideStorageProfile TRUE */ 1753 #endif /* (DPAA_VERSION >= 11) */ 1754 1755 e_FmPcdEngine nextEngine; /**< may be BMI, PLCR or CC */ 1756 union { /**< depends on nextEngine */ 1757 e_FmPcdDoneAction doneAction; /**< Used when next engine is BMI (done) */ 1758 t_FmPcdKgPlcrProfile plcrProfile; /**< Used when next engine is PLCR */ 1759 t_FmPcdKgCc cc; /**< Used when next engine is CC */ 1760 } kgNextEngineParams; 1761 t_FmPcdKgSchemeCounter schemeCounter; /**< A structure of parameters for updating 1762 the scheme counter */ 1763 } t_FmPcdKgSchemeParams; 1764 1765 /**************************************************************************//** 1766 @Collection Definitions for CC statistics 1767 *//***************************************************************************/ 1768 #if (DPAA_VERSION >= 11) 1769 #define FM_PCD_CC_STATS_MAX_NUM_OF_FLR 10 /* Maximal supported number of frame length ranges */ 1770 #define FM_PCD_CC_STATS_FLR_SIZE 2 /* Size in bytes of a frame length range limit */ 1771 #endif /* (DPAA_VERSION >= 11) */ 1772 #define FM_PCD_CC_STATS_COUNTER_SIZE 4 /* Size in bytes of a frame length range counter */ 1773 /* @} */ 1774 1775 /**************************************************************************//** 1776 @Description Parameters for defining CC as the next engine after a CC node. 1777 *//***************************************************************************/ 1778 typedef struct t_FmPcdCcNextCcParams { 1779 t_Handle h_CcNode; /**< A handle of the next CC node */ 1780 } t_FmPcdCcNextCcParams; 1781 1782 #if (DPAA_VERSION >= 11) 1783 /**************************************************************************//** 1784 @Description Parameters for defining Frame replicator as the next engine after a CC node. 1785 *//***************************************************************************/ 1786 typedef struct t_FmPcdCcNextFrParams { 1787 t_Handle h_FrmReplic; /**< A handle of the next frame replicator group */ 1788 } t_FmPcdCcNextFrParams; 1789 #endif /* (DPAA_VERSION >= 11) */ 1790 1791 /**************************************************************************//** 1792 @Description Parameters for defining Policer as the next engine after a CC node. 1793 *//***************************************************************************/ 1794 typedef struct t_FmPcdCcNextPlcrParams { 1795 bool overrideParams; /**< TRUE if CC override previously decided parameters*/ 1796 bool sharedProfile; /**< Relevant only if overrideParams=TRUE: 1797 TRUE if this profile is shared between ports */ 1798 uint16_t newRelativeProfileId; /**< Relevant only if overrideParams=TRUE: 1799 (otherwise profile id is taken from KeyGen); 1800 This parameter should indicate the policer 1801 profile offset within the port's 1802 policer profiles or from SHARED window.*/ 1803 uint32_t newFqid; /**< Relevant only if overrideParams=TRUE: 1804 FQID for enqueuing the frame; 1805 In earlier chips if policer next engine is KEYGEN, 1806 this parameter can be 0, because the KEYGEN 1807 always decides the enqueue FQID.*/ 1808 #if (DPAA_VERSION >= 11) 1809 uint8_t newRelativeStorageProfileId; 1810 /**< Indicates the relative storage profile offset within 1811 the port's storage profiles window; 1812 Relevant only if the port was configured with VSP. */ 1813 #endif /* (DPAA_VERSION >= 11) */ 1814 } t_FmPcdCcNextPlcrParams; 1815 1816 /**************************************************************************//** 1817 @Description Parameters for defining enqueue as the next action after a CC node. 1818 *//***************************************************************************/ 1819 typedef struct t_FmPcdCcNextEnqueueParams { 1820 e_FmPcdDoneAction action; /**< Action - when next engine is BMI (done) */ 1821 bool overrideFqid; /**< TRUE if CC override previously decided fqid and vspid, 1822 relevant if action = e_FM_PCD_ENQ_FRAME */ 1823 uint32_t newFqid; /**< Valid if overrideFqid=TRUE, FQID for enqueuing the frame 1824 (otherwise FQID is taken from KeyGen), 1825 relevant if action = e_FM_PCD_ENQ_FRAME */ 1826 #if (DPAA_VERSION >= 11) 1827 uint8_t newRelativeStorageProfileId; 1828 /**< Valid if overrideFqid=TRUE, Indicates the relative virtual 1829 storage profile offset within the port's storage profiles 1830 window; Relevant only if the port was configured with VSP. */ 1831 #endif /* (DPAA_VERSION >= 11) */ 1832 } t_FmPcdCcNextEnqueueParams; 1833 1834 /**************************************************************************//** 1835 @Description Parameters for defining KeyGen as the next engine after a CC node. 1836 *//***************************************************************************/ 1837 typedef struct t_FmPcdCcNextKgParams { 1838 bool overrideFqid; /**< TRUE if CC override previously decided fqid and vspid, 1839 Note - this parameters irrelevant for earlier chips */ 1840 uint32_t newFqid; /**< Valid if overrideFqid=TRUE, FQID for enqueuing the frame 1841 (otherwise FQID is taken from KeyGen), 1842 Note - this parameters irrelevant for earlier chips */ 1843 #if (DPAA_VERSION >= 11) 1844 uint8_t newRelativeStorageProfileId; 1845 /**< Valid if overrideFqid=TRUE, Indicates the relative virtual 1846 storage profile offset within the port's storage profiles 1847 window; Relevant only if the port was configured with VSP. */ 1848 #endif /* (DPAA_VERSION >= 11) */ 1849 1850 t_Handle h_DirectScheme; /**< Direct scheme handle to go to. */ 1851 } t_FmPcdCcNextKgParams; 1852 1853 /**************************************************************************//** 1854 @Description Parameters for defining the next engine after a CC node. 1855 *//***************************************************************************/ 1856 typedef struct t_FmPcdCcNextEngineParams { 1857 e_FmPcdEngine nextEngine; /**< User has to initialize parameters 1858 according to nextEngine definition */ 1859 union { 1860 t_FmPcdCcNextCcParams ccParams; /**< Parameters in case next engine is CC */ 1861 t_FmPcdCcNextPlcrParams plcrParams; /**< Parameters in case next engine is PLCR */ 1862 t_FmPcdCcNextEnqueueParams enqueueParams; /**< Parameters in case next engine is BMI */ 1863 t_FmPcdCcNextKgParams kgParams; /**< Parameters in case next engine is KG */ 1864 #if (DPAA_VERSION >= 11) 1865 t_FmPcdCcNextFrParams frParams; /**< Parameters in case next engine is FR */ 1866 #endif /* (DPAA_VERSION >= 11) */ 1867 } params; /**< union used for all the next-engine parameters options */ 1868 1869 t_Handle h_Manip; /**< Handle to Manipulation object. 1870 Relevant if next engine is of type result 1871 (e_FM_PCD_PLCR, e_FM_PCD_KG, e_FM_PCD_DONE) */ 1872 1873 bool statisticsEn; /**< If TRUE, statistics counters are incremented 1874 for each frame passing through this 1875 Coarse Classification entry. */ 1876 } t_FmPcdCcNextEngineParams; 1877 1878 /**************************************************************************//** 1879 @Description Parameters for defining a single CC key 1880 *//***************************************************************************/ 1881 typedef struct t_FmPcdCcKeyParams { 1882 uint8_t *p_Key; /**< Relevant only if 'action' = e_FM_PCD_ACTION_EXACT_MATCH; 1883 pointer to the key of the size defined in keySize */ 1884 uint8_t *p_Mask; /**< Relevant only if 'action' = e_FM_PCD_ACTION_EXACT_MATCH; 1885 pointer to the Mask per key of the size defined 1886 in keySize. p_Key and p_Mask (if defined) has to be 1887 of the same size defined in the keySize; 1888 NOTE that if this value is equal for all entries whithin 1889 this table, the driver will automatically use global-mask 1890 (i.e. one common mask for all entries) instead of private 1891 one; that is done in order to spare some memory and for 1892 better performance. */ 1893 t_FmPcdCcNextEngineParams ccNextEngineParams; 1894 /**< parameters for the next for the defined Key in 1895 the p_Key */ 1896 } t_FmPcdCcKeyParams; 1897 1898 /**************************************************************************//** 1899 @Description Parameters for defining CC keys parameters 1900 The driver supports two methods for CC node allocation: dynamic and static. 1901 Static mode was created in order to prevent runtime alloc/free 1902 of FMan memory (MURAM), which may cause fragmentation; in this mode, 1903 the driver automatically allocates the memory according to 1904 'maxNumOfKeys' parameter. The driver calculates the maximal memory 1905 size that may be used for this CC-Node taking into consideration 1906 'maskSupport' and 'statisticsMode' parameters. 1907 When 'action' = e_FM_PCD_ACTION_INDEXED_LOOKUP in the extraction 1908 parameters of this node, 'maxNumOfKeys' must be equal to 'numOfKeys'. 1909 In dynamic mode, 'maxNumOfKeys' must be zero. At initialization, 1910 all required structures are allocated according to 'numOfKeys' 1911 parameter. During runtime modification, these structures are 1912 re-allocated according to the updated number of keys. 1913 1914 Please note that 'action' and 'icIndxMask' mentioned in the 1915 specific parameter explanations are passed in the extraction 1916 parameters of the node (fields of extractCcParams.extractNonHdr). 1917 *//***************************************************************************/ 1918 typedef struct t_KeysParams { 1919 uint16_t maxNumOfKeys; /**< Maximum number of keys that will (ever) be used in this CC-Node; 1920 A value of zero may be used for dynamic memory allocation. */ 1921 bool maskSupport; /**< This parameter is relevant only if a node is initialized with 1922 'action' = e_FM_PCD_ACTION_EXACT_MATCH and maxNumOfKeys > 0; 1923 Should be TRUE to reserve table memory for key masks, even if 1924 initial keys do not contain masks, or if the node was initialized 1925 as 'empty' (without keys); this will allow user to add keys with 1926 masks at runtime. 1927 NOTE that if user want to use only global-masks (i.e. one common mask 1928 for all the entries within this table, this parameter should set to 'FALSE'. */ 1929 e_FmPcdCcStatsMode statisticsMode; /**< Determines the supported statistics mode for all node's keys. 1930 To enable statistics gathering, statistics should be enabled per 1931 every key, using 'statisticsEn' in next engine parameters structure 1932 of that key; 1933 If 'maxNumOfKeys' is set, all required structures will be 1934 preallocated for all keys. */ 1935 #if (DPAA_VERSION >= 11) 1936 uint16_t frameLengthRanges[FM_PCD_CC_STATS_MAX_NUM_OF_FLR]; 1937 /**< Relevant only for 'RMON' statistics mode 1938 (this feature is supported only on B4860 device); 1939 Holds a list of programmable thresholds - for each received frame, 1940 its length in bytes is examined against these range thresholds and 1941 the appropriate counter is incremented by 1 - for example, to belong 1942 to range i, the following should hold: 1943 range i-1 threshold < frame length <= range i threshold 1944 Each range threshold must be larger then its preceding range 1945 threshold, and last range threshold must be 0xFFFF. */ 1946 #endif /* (DPAA_VERSION >= 11) */ 1947 uint16_t numOfKeys; /**< Number of initial keys; 1948 Note that in case of 'action' = e_FM_PCD_ACTION_INDEXED_LOOKUP, 1949 this field should be power-of-2 of the number of bits that are 1950 set in 'icIndxMask'. */ 1951 uint8_t keySize; /**< Size of key - for extraction of type FULL_FIELD, 'keySize' has 1952 to be the standard size of the selected key; For other extraction 1953 types, 'keySize' has to be as size of extraction; When 'action' = 1954 e_FM_PCD_ACTION_INDEXED_LOOKUP, 'keySize' must be 2. */ 1955 t_FmPcdCcKeyParams keyParams[FM_PCD_MAX_NUM_OF_KEYS]; 1956 /**< An array with 'numOfKeys' entries, each entry specifies the 1957 corresponding key parameters; 1958 When 'action' = e_FM_PCD_ACTION_EXACT_MATCH, this value must not 1959 exceed 255 (FM_PCD_MAX_NUM_OF_KEYS-1) as the last entry is saved 1960 for the 'miss' entry. */ 1961 t_FmPcdCcNextEngineParams ccNextEngineParamsForMiss; 1962 /**< Parameters for defining the next engine when a key is not matched; 1963 Not relevant if action = e_FM_PCD_ACTION_INDEXED_LOOKUP. */ 1964 } t_KeysParams; 1965 1966 1967 /**************************************************************************//** 1968 @Description Parameters for defining a CC node 1969 *//***************************************************************************/ 1970 typedef struct t_FmPcdCcNodeParams { 1971 t_FmPcdExtractEntry extractCcParams; /**< Extraction parameters */ 1972 t_KeysParams keysParams; /**< Keys definition matching the selected extraction */ 1973 } t_FmPcdCcNodeParams; 1974 1975 /**************************************************************************//** 1976 @Description Parameters for defining a hash table 1977 *//***************************************************************************/ 1978 typedef struct t_FmPcdHashTableParams { 1979 uint16_t maxNumOfKeys; /**< Maximum Number Of Keys that will (ever) be used in this Hash-table */ 1980 e_FmPcdCcStatsMode statisticsMode; /**< If not e_FM_PCD_CC_STATS_MODE_NONE, the required structures for the 1981 requested statistics mode will be allocated according to maxNumOfKeys. */ 1982 uint8_t kgHashShift; /**< KG-Hash-shift as it was configured in the KG-scheme 1983 that leads to this hash-table. */ 1984 uint16_t hashResMask; /**< Mask that will be used on the hash-result; 1985 The number-of-sets for this hash will be calculated 1986 as (2^(number of bits set in 'hashResMask')); 1987 The 4 lower bits must be cleared. */ 1988 uint8_t hashShift; /**< Byte offset from the beginning of the KeyGen hash result to the 1989 2-bytes to be used as hash index. */ 1990 uint8_t matchKeySize; /**< Size of the exact match keys held by the hash buckets */ 1991 1992 t_FmPcdCcNextEngineParams ccNextEngineParamsForMiss; /**< Parameters for defining the next engine when a key is not matched */ 1993 1994 } t_FmPcdHashTableParams; 1995 1996 /**************************************************************************//** 1997 @Description Parameters for defining a CC tree group. 1998 1999 This structure defines a CC group in terms of NetEnv units 2000 and the action to be taken in each case. The unitIds list must 2001 be given in order from low to high indices. 2002 2003 t_FmPcdCcNextEngineParams is a list of 2^numOfDistinctionUnits 2004 structures where each defines the next action to be taken for 2005 each units combination. for example: 2006 numOfDistinctionUnits = 2 2007 unitIds = {1,3} 2008 p_NextEnginePerEntriesInGrp[0] = t_FmPcdCcNextEngineParams for the case that 2009 unit 1 - not found; unit 3 - not found; 2010 p_NextEnginePerEntriesInGrp[1] = t_FmPcdCcNextEngineParams for the case that 2011 unit 1 - not found; unit 3 - found; 2012 p_NextEnginePerEntriesInGrp[2] = t_FmPcdCcNextEngineParams for the case that 2013 unit 1 - found; unit 3 - not found; 2014 p_NextEnginePerEntriesInGrp[3] = t_FmPcdCcNextEngineParams for the case that 2015 unit 1 - found; unit 3 - found; 2016 *//***************************************************************************/ 2017 typedef struct t_FmPcdCcGrpParams { 2018 uint8_t numOfDistinctionUnits; /**< Up to 4 */ 2019 uint8_t unitIds[FM_PCD_MAX_NUM_OF_CC_UNITS]; 2020 /**< Indices of the units as defined in 2021 FM_PCD_NetEnvCharacteristicsSet() */ 2022 t_FmPcdCcNextEngineParams nextEnginePerEntriesInGrp[FM_PCD_MAX_NUM_OF_CC_ENTRIES_IN_GRP]; 2023 /**< Maximum entries per group is 16 */ 2024 } t_FmPcdCcGrpParams; 2025 2026 /**************************************************************************//** 2027 @Description Parameters for defining CC tree groups 2028 *//***************************************************************************/ 2029 typedef struct t_FmPcdCcTreeParams { 2030 t_Handle h_NetEnv; /**< A handle to the Network environment as returned 2031 by FM_PCD_NetEnvCharacteristicsSet() */ 2032 uint8_t numOfGrps; /**< Number of CC groups within the CC tree */ 2033 t_FmPcdCcGrpParams ccGrpParams[FM_PCD_MAX_NUM_OF_CC_GROUPS]; 2034 /**< Parameters for each group. */ 2035 } t_FmPcdCcTreeParams; 2036 2037 2038 /**************************************************************************//** 2039 @Description CC key statistics structure 2040 *//***************************************************************************/ 2041 typedef struct t_FmPcdCcKeyStatistics { 2042 uint32_t byteCount; /**< This counter reflects byte count of frames that 2043 were matched by this key. */ 2044 uint32_t frameCount; /**< This counter reflects count of frames that 2045 were matched by this key. */ 2046 #if (DPAA_VERSION >= 11) 2047 uint32_t frameLengthRangeCount[FM_PCD_CC_STATS_MAX_NUM_OF_FLR]; 2048 /**< These counters reflect how many frames matched 2049 this key in 'RMON' statistics mode: 2050 Each counter holds the number of frames of a 2051 specific frames length range, according to the 2052 ranges provided at initialization. */ 2053 #endif /* (DPAA_VERSION >= 11) */ 2054 } t_FmPcdCcKeyStatistics; 2055 2056 /**************************************************************************//** 2057 @Description Parameters for defining policer byte rate 2058 *//***************************************************************************/ 2059 typedef struct t_FmPcdPlcrByteRateModeParams { 2060 e_FmPcdPlcrFrameLengthSelect frameLengthSelection; /**< Frame length selection */ 2061 e_FmPcdPlcrRollBackFrameSelect rollBackFrameSelection; /**< relevant option only e_FM_PCD_PLCR_L2_FRM_LEN, 2062 e_FM_PCD_PLCR_FULL_FRM_LEN */ 2063 } t_FmPcdPlcrByteRateModeParams; 2064 2065 /**************************************************************************//** 2066 @Description Parameters for defining the policer profile (based on 2067 RFC-2698 or RFC-4115 attributes). 2068 *//***************************************************************************/ 2069 typedef struct t_FmPcdPlcrNonPassthroughAlgParams { 2070 e_FmPcdPlcrRateMode rateMode; /**< Byte mode or Packet mode */ 2071 t_FmPcdPlcrByteRateModeParams byteModeParams; /**< Valid for Byte NULL for Packet */ 2072 uint32_t committedInfoRate; /**< KBits/Second or Packets/Second */ 2073 uint32_t committedBurstSize; /**< Bytes/Packets */ 2074 uint32_t peakOrExcessInfoRate; /**< KBits/Second or Packets/Second */ 2075 uint32_t peakOrExcessBurstSize; /**< Bytes/Packets */ 2076 } t_FmPcdPlcrNonPassthroughAlgParams; 2077 2078 /**************************************************************************//** 2079 @Description Parameters for defining the next engine after policer 2080 *//***************************************************************************/ 2081 typedef union u_FmPcdPlcrNextEngineParams { 2082 e_FmPcdDoneAction action; /**< Action - when next engine is BMI (done) */ 2083 t_Handle h_Profile; /**< Policer profile handle - used when next engine 2084 is Policer, must be a SHARED profile */ 2085 t_Handle h_DirectScheme; /**< Direct scheme select - when next engine is KeyGen */ 2086 } u_FmPcdPlcrNextEngineParams; 2087 2088 /**************************************************************************//** 2089 @Description Parameters for defining the policer profile entry 2090 *//***************************************************************************/ 2091 typedef struct t_FmPcdPlcrProfileParams { 2092 bool modify; /**< TRUE to change an existing profile */ 2093 union { 2094 struct { 2095 e_FmPcdProfileTypeSelection profileType; /**< Type of policer profile */ 2096 t_Handle h_FmPort; /**< Relevant for per-port profiles only */ 2097 uint16_t relativeProfileId; /**< Profile id - relative to shared group or to port */ 2098 } newParams; /**< use it when modify = FALSE */ 2099 t_Handle h_Profile; /**< A handle to a profile - use it when modify=TRUE */ 2100 } id; 2101 e_FmPcdPlcrAlgorithmSelection algSelection; /**< Profile Algorithm PASS_THROUGH, RFC_2698, RFC_4115 */ 2102 e_FmPcdPlcrColorMode colorMode; /**< COLOR_BLIND, COLOR_AWARE */ 2103 2104 union { 2105 e_FmPcdPlcrColor dfltColor; /**< For Color-Blind Pass-Through mode; the policer will re-color 2106 any incoming packet with the default value. */ 2107 e_FmPcdPlcrColor override; /**< For Color-Aware modes; the profile response to a 2108 pre-color value of 2'b11. */ 2109 } color; 2110 2111 t_FmPcdPlcrNonPassthroughAlgParams nonPassthroughAlgParams; /**< RFC2698 or RFC4115 parameters */ 2112 2113 e_FmPcdEngine nextEngineOnGreen; /**< Next engine for green-colored frames */ 2114 u_FmPcdPlcrNextEngineParams paramsOnGreen; /**< Next engine parameters for green-colored frames */ 2115 2116 e_FmPcdEngine nextEngineOnYellow; /**< Next engine for yellow-colored frames */ 2117 u_FmPcdPlcrNextEngineParams paramsOnYellow; /**< Next engine parameters for yellow-colored frames */ 2118 2119 e_FmPcdEngine nextEngineOnRed; /**< Next engine for red-colored frames */ 2120 u_FmPcdPlcrNextEngineParams paramsOnRed; /**< Next engine parameters for red-colored frames */ 2121 2122 bool trapProfileOnFlowA; /**< Obsolete - do not use */ 2123 bool trapProfileOnFlowB; /**< Obsolete - do not use */ 2124 bool trapProfileOnFlowC; /**< Obsolete - do not use */ 2125 } t_FmPcdPlcrProfileParams; 2126 2127 /**************************************************************************//** 2128 @Description Parameters for selecting a location for requested manipulation 2129 *//***************************************************************************/ 2130 typedef struct t_FmManipHdrInfo { 2131 e_NetHeaderType hdr; /**< Header selection */ 2132 e_FmPcdHdrIndex hdrIndex; /**< Relevant only for MPLS, VLAN and tunneled IP. Otherwise should be cleared. */ 2133 bool byField; /**< TRUE if the location of manipulation is according to some field in the specific header*/ 2134 t_FmPcdFields fullField; /**< Relevant only when byField = TRUE: Extract field */ 2135 } t_FmManipHdrInfo; 2136 2137 #if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) 2138 /**************************************************************************//** 2139 @Description Parameters for defining an insertion manipulation 2140 of type e_FM_PCD_MANIP_INSRT_TO_START_OF_FRAME_TEMPLATE 2141 *//***************************************************************************/ 2142 typedef struct t_FmPcdManipHdrInsrtByTemplateParams { 2143 uint8_t size; /**< Size of insert template to the start of the frame. */ 2144 uint8_t hdrTemplate[FM_PCD_MAX_MANIP_INSRT_TEMPLATE_SIZE]; 2145 /**< Array of the insertion template. */ 2146 2147 bool modifyOuterIp; /**< TRUE if user want to modify some fields in outer IP. */ 2148 struct { 2149 uint16_t ipOuterOffset; /**< Offset of outer IP in the insert template, relevant if modifyOuterIp = TRUE.*/ 2150 uint16_t dscpEcn; /**< value of dscpEcn in IP outer, relevant if modifyOuterIp = TRUE. 2151 in IPV4 dscpEcn only byte - it has to be adjusted to the right*/ 2152 bool udpPresent; /**< TRUE if UDP is present in the insert template, relevant if modifyOuterIp = TRUE.*/ 2153 uint8_t udpOffset; /**< Offset in the insert template of UDP, relevant if modifyOuterIp = TRUE and udpPresent=TRUE.*/ 2154 uint8_t ipIdentGenId; /**< Used by FMan-CTRL to calculate IP-identification field,relevant if modifyOuterIp = TRUE.*/ 2155 bool recalculateLength; /**< TRUE if recalculate length has to be performed due to the engines in the path which can change the frame later, relevant if modifyOuterIp = TRUE.*/ 2156 struct { 2157 uint8_t blockSize; /**< The CAAM block-size; Used by FMan-CTRL to calculate the IP Total Length field.*/ 2158 uint8_t extraBytesAddedAlignedToBlockSize; /**< Used by FMan-CTRL to calculate the IP Total Length field and UDP length*/ 2159 uint8_t extraBytesAddedNotAlignedToBlockSize;/**< Used by FMan-CTRL to calculate the IP Total Length field and UDP length.*/ 2160 } recalculateLengthParams; /**< Recalculate length parameters - relevant if modifyOuterIp = TRUE and recalculateLength = TRUE */ 2161 } modifyOuterIpParams; /**< Outer IP modification parameters - ignored if modifyOuterIp is FALSE */ 2162 2163 bool modifyOuterVlan; /**< TRUE if user wants to modify VPri field in the outer VLAN header*/ 2164 struct { 2165 uint8_t vpri; /**< Value of VPri, relevant if modifyOuterVlan = TRUE 2166 VPri only 3 bits, it has to be adjusted to the right*/ 2167 } modifyOuterVlanParams; 2168 } t_FmPcdManipHdrInsrtByTemplateParams; 2169 2170 /**************************************************************************//** 2171 @Description Parameters for defining CAPWAP fragmentation 2172 *//***************************************************************************/ 2173 typedef struct t_CapwapFragmentationParams { 2174 uint16_t sizeForFragmentation; /**< if length of the frame is greater than this value, CAPWAP fragmentation will be executed.*/ 2175 bool headerOptionsCompr; /**< TRUE - first fragment include the CAPWAP header options field, 2176 and all other fragments exclude the CAPWAP options field, 2177 FALSE - all fragments include CAPWAP header options field. */ 2178 } t_CapwapFragmentationParams; 2179 2180 /**************************************************************************//** 2181 @Description Parameters for defining CAPWAP reassembly 2182 *//***************************************************************************/ 2183 typedef struct t_CapwapReassemblyParams { 2184 uint16_t maxNumFramesInProcess; /**< Number of frames which can be reassembled concurrently; must be power of 2. 2185 In case numOfFramesPerHashEntry == e_FM_PCD_MANIP_FOUR_WAYS_HASH, 2186 maxNumFramesInProcess has to be in the range of 4 - 512, 2187 In case numOfFramesPerHashEntry == e_FM_PCD_MANIP_EIGHT_WAYS_HASH, 2188 maxNumFramesInProcess has to be in the range of 8 - 2048 */ 2189 bool haltOnDuplicationFrag; /**< If TRUE, reassembly process will be halted due to duplicated fragment, 2190 and all processed fragments will be enqueued with error indication; 2191 If FALSE, only duplicated fragments will be enqueued with error indication. */ 2192 2193 e_FmPcdManipReassemTimeOutMode timeOutMode; /**< Expiration delay initialized by the reassembly process */ 2194 uint32_t fqidForTimeOutFrames; /**< FQID in which time out frames will enqueue during Time Out Process */ 2195 uint32_t timeoutRoutineRequestTime; 2196 /**< Represents the time interval in microseconds between consecutive 2197 timeout routine requests It has to be power of 2. */ 2198 uint32_t timeoutThresholdForReassmProcess; 2199 /**< Time interval (microseconds) for marking frames in process as too old; 2200 Frames in process are those for which at least one fragment was received 2201 but not all fragments. */ 2202 2203 e_FmPcdManipReassemWaysNumber numOfFramesPerHashEntry;/**< Number of frames per hash entry (needed for the reassembly process) */ 2204 } t_CapwapReassemblyParams; 2205 2206 /**************************************************************************//** 2207 @Description Parameters for defining fragmentation/reassembly manipulation 2208 *//***************************************************************************/ 2209 typedef struct t_FmPcdManipFragOrReasmParams { 2210 bool frag; /**< TRUE if using the structure for fragmentation, 2211 otherwise this structure is used for reassembly */ 2212 uint8_t sgBpid; /**< Scatter/Gather buffer pool id; 2213 Same LIODN number is used for these buffers as for 2214 the received frames buffers, so buffers of this pool 2215 need to be allocated in the same memory area as the 2216 received buffers. If the received buffers arrive 2217 from different sources, the Scatter/Gather BP id 2218 should be mutual to all these sources. */ 2219 e_NetHeaderType hdr; /**< Header selection */ 2220 union { 2221 t_CapwapFragmentationParams capwapFragParams; /**< Structure for CAPWAP fragmentation, 2222 relevant if 'frag' = TRUE, 'hdr' = HEADER_TYPE_CAPWAP */ 2223 t_CapwapReassemblyParams capwapReasmParams; /**< Structure for CAPWAP reassembly, 2224 relevant if 'frag' = FALSE, 'hdr' = HEADER_TYPE_CAPWAP */ 2225 } u; 2226 } t_FmPcdManipFragOrReasmParams; 2227 #endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */ 2228 2229 2230 /**************************************************************************//** 2231 @Description Parameters for defining header removal by header type 2232 *//***************************************************************************/ 2233 typedef struct t_FmPcdManipHdrRmvByHdrParams { 2234 e_FmPcdManipHdrRmvByHdrType type; /**< Selection of header removal location */ 2235 union { 2236 #if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) 2237 struct { 2238 bool include; /**< If FALSE, remove until the specified header (not including the header); 2239 If TRUE, remove also the specified header. */ 2240 t_FmManipHdrInfo hdrInfo; 2241 } fromStartByHdr; /**< Relevant when type = e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START */ 2242 #endif /* (DPAA_VERSION >= 11) || ... */ 2243 #if (DPAA_VERSION >= 11) 2244 t_FmManipHdrInfo hdrInfo; /**< Relevant when type = e_FM_PCD_MANIP_RMV_BY_HDR_FROM_START */ 2245 #endif /* (DPAA_VERSION >= 11) */ 2246 e_FmPcdManipHdrRmvSpecificL2 specificL2; /**< Relevant when type = e_FM_PCD_MANIP_BY_HDR_SPECIFIC_L2; 2247 Defines which L2 headers to remove. */ 2248 } u; 2249 } t_FmPcdManipHdrRmvByHdrParams; 2250 2251 /**************************************************************************//** 2252 @Description Parameters for configuring IP fragmentation manipulation 2253 2254 Restrictions: 2255 - IP Fragmentation output fragments must not be forwarded to application directly. 2256 - Maximum number of fragments per frame is 16. 2257 - Fragmentation of IP fragments is not supported. 2258 - IPv4 packets containing header Option fields are fragmented by copying all option 2259 fields to each fragment, regardless of the copy bit value. 2260 - Transmit confirmation is not supported. 2261 - Fragmentation after SEC can't handle S/G frames. 2262 - Fragmentation nodes must be set as the last PCD action (i.e. the 2263 corresponding CC node key must have next engine set to e_FM_PCD_DONE). 2264 - Only BMan buffers shall be used for frames to be fragmented. 2265 - IPF does not support VSP. Therefore, on the same port where we have IPF 2266 we cannot support VSP. 2267 - NOTE: The following comment is relevant only for FMAN v3 devices: IPF 2268 does not support VSP. Therefore, on the same port where we have IPF we 2269 cannot support VSP. 2270 *//***************************************************************************/ 2271 typedef struct t_FmPcdManipFragIpParams { 2272 uint16_t sizeForFragmentation; /**< If length of the frame is greater than this value, 2273 IP fragmentation will be executed.*/ 2274 #if (DPAA_VERSION == 10) 2275 uint8_t scratchBpid; /**< Absolute buffer pool id according to BM configuration.*/ 2276 #endif /* (DPAA_VERSION == 10) */ 2277 bool sgBpidEn; /**< Enable a dedicated buffer pool id for the Scatter/Gather buffer allocation; 2278 If disabled, the Scatter/Gather buffer will be allocated from the same pool as the 2279 received frame's buffer. */ 2280 uint8_t sgBpid; /**< Scatter/Gather buffer pool id; 2281 This parameters is relevant when 'sgBpidEn=TRUE'; 2282 Same LIODN number is used for these buffers as for the received frames buffers, so buffers 2283 of this pool need to be allocated in the same memory area as the received buffers. 2284 If the received buffers arrive from different sources, the Scatter/Gather BP id should be 2285 mutual to all these sources. */ 2286 e_FmPcdManipDontFragAction dontFragAction; /**< Don't Fragment Action - If an IP packet is larger 2287 than MTU and its DF bit is set, then this field will 2288 determine the action to be taken.*/ 2289 } t_FmPcdManipFragIpParams; 2290 2291 /**************************************************************************//** 2292 @Description Parameters for configuring IP reassembly manipulation. 2293 2294 This is a common structure for both IPv4 and IPv6 reassembly 2295 manipulation. For reassembly of both IPv4 and IPv6, make sure to 2296 set the 'hdr' field in t_FmPcdManipReassemParams to HEADER_TYPE_IPv6. 2297 2298 Restrictions: 2299 - Application must define at least one scheme to catch the reassembled frames. 2300 - Maximum number of fragments per frame is 16. 2301 - Reassembly of IPv4 fragments containing Option fields is supported. 2302 2303 *//***************************************************************************/ 2304 typedef struct t_FmPcdManipReassemIpParams { 2305 uint8_t relativeSchemeId[2]; /**< Partition relative scheme id: 2306 relativeSchemeId[0] - Relative scheme ID for IPV4 Reassembly manipulation; 2307 relativeSchemeId[1] - Relative scheme ID for IPV6 Reassembly manipulation; 2308 NOTE: The following comment is relevant only for FMAN v2 devices: 2309 Relative scheme ID for IPv4/IPv6 Reassembly manipulation must be smaller than 2310 the user schemes id to ensure that the reassembly schemes will be first match; 2311 Rest schemes, if defined, should have higher relative scheme ID. */ 2312 #if (DPAA_VERSION >= 11) 2313 uint32_t nonConsistentSpFqid; /**< In case that other fragments of the frame corresponds to different storage 2314 profile than the opening fragment (Non-Consistent-SP state) 2315 then one of two possible scenarios occurs: 2316 if 'nonConsistentSpFqid != 0', the reassembled frame will be enqueued to 2317 this fqid, otherwise a 'Non Consistent SP' bit will be set in the FD[status].*/ 2318 #else 2319 uint8_t sgBpid; /**< Buffer pool id for the S/G frame created by the reassembly process */ 2320 #endif /* (DPAA_VERSION >= 11) */ 2321 uint8_t dataMemId; /**< Memory partition ID for the IPR's external tables structure */ 2322 uint16_t dataLiodnOffset; /**< LIODN offset for access the IPR's external tables structure. */ 2323 uint16_t minFragSize[2]; /**< Minimum fragment size: 2324 minFragSize[0] - for ipv4, minFragSize[1] - for ipv6 */ 2325 e_FmPcdManipReassemWaysNumber numOfFramesPerHashEntry[2]; 2326 /**< Number of frames per hash entry needed for reassembly process: 2327 numOfFramesPerHashEntry[0] - for ipv4 (max value is e_FM_PCD_MANIP_EIGHT_WAYS_HASH); 2328 numOfFramesPerHashEntry[1] - for ipv6 (max value is e_FM_PCD_MANIP_SIX_WAYS_HASH). */ 2329 uint16_t maxNumFramesInProcess; /**< Number of frames which can be processed by Reassembly in the same time; 2330 Must be power of 2; 2331 In the case numOfFramesPerHashEntry == e_FM_PCD_MANIP_FOUR_WAYS_HASH, 2332 maxNumFramesInProcess has to be in the range of 4 - 512; 2333 In the case numOfFramesPerHashEntry == e_FM_PCD_MANIP_EIGHT_WAYS_HASH, 2334 maxNumFramesInProcess has to be in the range of 8 - 2048. */ 2335 e_FmPcdManipReassemTimeOutMode timeOutMode; /**< Expiration delay initialized by Reassembly process */ 2336 uint32_t fqidForTimeOutFrames; /**< FQID in which time out frames will enqueue during Time Out Process; 2337 Recommended value for this field is 0; in this way timed-out frames will be discarded */ 2338 uint32_t timeoutThresholdForReassmProcess; 2339 /**< Represents the time interval in microseconds which defines 2340 if opened frame (at least one fragment was processed but not all the fragments)is found as too old*/ 2341 } t_FmPcdManipReassemIpParams; 2342 2343 /**************************************************************************//** 2344 @Description structure for defining IPSEC manipulation 2345 *//***************************************************************************/ 2346 typedef struct t_FmPcdManipSpecialOffloadIPSecParams { 2347 bool decryption; /**< TRUE if being used in decryption direction; 2348 FALSE if being used in encryption direction. */ 2349 bool ecnCopy; /**< TRUE to copy the ECN bits from inner/outer to outer/inner 2350 (direction depends on the 'decryption' field). */ 2351 bool dscpCopy; /**< TRUE to copy the DSCP bits from inner/outer to outer/inner 2352 (direction depends on the 'decryption' field). */ 2353 bool variableIpHdrLen; /**< TRUE for supporting variable IP header length in decryption. */ 2354 bool variableIpVersion; /**< TRUE for supporting both IP version on the same SA in encryption */ 2355 uint8_t outerIPHdrLen; /**< if 'variableIpVersion == TRUE' then this field must be set to non-zero value; 2356 It is specifies the length of the outer IP header that was configured in the 2357 corresponding SA. */ 2358 uint16_t arwSize; /**< if <> '0' then will perform ARW check for this SA; 2359 The value must be a multiplication of 16 */ 2360 uintptr_t arwAddr; /**< if arwSize <> '0' then this field must be set to non-zero value; 2361 MUST be allocated from FMAN's MURAM that the post-sec op-port belongs to; 2362 Must be 4B aligned. Required MURAM size is 'NEXT_POWER_OF_2(arwSize+32))/8+4' Bytes */ 2363 } t_FmPcdManipSpecialOffloadIPSecParams; 2364 2365 #if (DPAA_VERSION >= 11) 2366 /**************************************************************************//** 2367 @Description Parameters for configuring CAPWAP fragmentation manipulation 2368 2369 Restrictions: 2370 - Maximum number of fragments per frame is 16. 2371 - Transmit confirmation is not supported. 2372 - Fragmentation nodes must be set as the last PCD action (i.e. the 2373 corresponding CC node key must have next engine set to e_FM_PCD_DONE). 2374 - Only BMan buffers shall be used for frames to be fragmented. 2375 - NOTE: The following comment is relevant only for FMAN v3 devices: IPF 2376 does not support VSP. Therefore, on the same port where we have IPF we 2377 cannot support VSP. 2378 *//***************************************************************************/ 2379 typedef struct t_FmPcdManipFragCapwapParams { 2380 uint16_t sizeForFragmentation; /**< If length of the frame is greater than this value, 2381 CAPWAP fragmentation will be executed.*/ 2382 bool sgBpidEn; /**< Enable a dedicated buffer pool id for the Scatter/Gather buffer allocation; 2383 If disabled, the Scatter/Gather buffer will be allocated from the same pool as the 2384 received frame's buffer. */ 2385 uint8_t sgBpid; /**< Scatter/Gather buffer pool id; 2386 This parameters is relevant when 'sgBpidEn=TRUE'; 2387 Same LIODN number is used for these buffers as for the received frames buffers, so buffers 2388 of this pool need to be allocated in the same memory area as the received buffers. 2389 If the received buffers arrive from different sources, the Scatter/Gather BP id should be 2390 mutual to all these sources. */ 2391 bool compressModeEn; /**< CAPWAP Header Options Compress Enable mode; 2392 When this mode is enabled then only the first fragment include the CAPWAP header options 2393 field (if user provides it in the input frame) and all other fragments exclude the CAPWAP 2394 options field (CAPWAP header is updated accordingly).*/ 2395 } t_FmPcdManipFragCapwapParams; 2396 2397 /**************************************************************************//** 2398 @Description Parameters for configuring CAPWAP reassembly manipulation. 2399 2400 Restrictions: 2401 - Application must define one scheme to catch the reassembled frames. 2402 - Maximum number of fragments per frame is 16. 2403 2404 *//***************************************************************************/ 2405 typedef struct t_FmPcdManipReassemCapwapParams { 2406 uint8_t relativeSchemeId; /**< Partition relative scheme id; 2407 NOTE: this id must be smaller than the user schemes id to ensure that the reassembly scheme will be first match; 2408 Rest schemes, if defined, should have higher relative scheme ID. */ 2409 uint8_t dataMemId; /**< Memory partition ID for the IPR's external tables structure */ 2410 uint16_t dataLiodnOffset; /**< LIODN offset for access the IPR's external tables structure. */ 2411 uint16_t maxReassembledFrameLength;/**< The maximum CAPWAP reassembled frame length in bytes; 2412 If maxReassembledFrameLength == 0, any successful reassembled frame length is 2413 considered as a valid length; 2414 if maxReassembledFrameLength > 0, a successful reassembled frame which its length 2415 exceeds this value is considered as an error frame (FD status[CRE] bit is set). */ 2416 e_FmPcdManipReassemWaysNumber numOfFramesPerHashEntry; 2417 /**< Number of frames per hash entry needed for reassembly process */ 2418 uint16_t maxNumFramesInProcess; /**< Number of frames which can be processed by reassembly in the same time; 2419 Must be power of 2; 2420 In the case numOfFramesPerHashEntry == e_FM_PCD_MANIP_FOUR_WAYS_HASH, 2421 maxNumFramesInProcess has to be in the range of 4 - 512; 2422 In the case numOfFramesPerHashEntry == e_FM_PCD_MANIP_EIGHT_WAYS_HASH, 2423 maxNumFramesInProcess has to be in the range of 8 - 2048. */ 2424 e_FmPcdManipReassemTimeOutMode timeOutMode; /**< Expiration delay initialized by Reassembly process */ 2425 uint32_t fqidForTimeOutFrames; /**< FQID in which time out frames will enqueue during Time Out Process; 2426 Recommended value for this field is 0; in this way timed-out frames will be discarded */ 2427 uint32_t timeoutThresholdForReassmProcess; 2428 /**< Represents the time interval in microseconds which defines 2429 if opened frame (at least one fragment was processed but not all the fragments)is found as too old*/ 2430 } t_FmPcdManipReassemCapwapParams; 2431 2432 /**************************************************************************//** 2433 @Description structure for defining CAPWAP manipulation 2434 *//***************************************************************************/ 2435 typedef struct t_FmPcdManipSpecialOffloadCapwapParams { 2436 bool dtls; /**< TRUE if continue to SEC DTLS encryption */ 2437 e_FmPcdManipHdrQosSrc qosSrc; /**< TODO */ 2438 } t_FmPcdManipSpecialOffloadCapwapParams; 2439 2440 #endif /* (DPAA_VERSION >= 11) */ 2441 2442 2443 /**************************************************************************//** 2444 @Description Parameters for defining special offload manipulation 2445 *//***************************************************************************/ 2446 typedef struct t_FmPcdManipSpecialOffloadParams { 2447 e_FmPcdManipSpecialOffloadType type; /**< Type of special offload manipulation */ 2448 union 2449 { 2450 t_FmPcdManipSpecialOffloadIPSecParams ipsec; /**< Parameters for IPSec; Relevant when 2451 type = e_FM_PCD_MANIP_SPECIAL_OFFLOAD_IPSEC */ 2452 #if (DPAA_VERSION >= 11) 2453 t_FmPcdManipSpecialOffloadCapwapParams capwap; /**< Parameters for CAPWAP; Relevant when 2454 type = e_FM_PCD_MANIP_SPECIAL_OFFLOAD_CAPWAP */ 2455 #endif /* (DPAA_VERSION >= 11) */ 2456 } u; 2457 } t_FmPcdManipSpecialOffloadParams; 2458 2459 /**************************************************************************//** 2460 @Description Parameters for defining insertion manipulation 2461 *//***************************************************************************/ 2462 typedef struct t_FmPcdManipHdrInsrt { 2463 uint8_t size; /**< size of inserted section */ 2464 uint8_t *p_Data; /**< data to be inserted */ 2465 } t_FmPcdManipHdrInsrt; 2466 2467 2468 /**************************************************************************//** 2469 @Description Parameters for defining generic removal manipulation 2470 *//***************************************************************************/ 2471 typedef struct t_FmPcdManipHdrRmvGenericParams { 2472 uint8_t offset; /**< Offset from beginning of header to the start 2473 location of the removal */ 2474 uint8_t size; /**< Size of removed section */ 2475 } t_FmPcdManipHdrRmvGenericParams; 2476 2477 /**************************************************************************//** 2478 @Description Parameters for defining generic insertion manipulation 2479 *//***************************************************************************/ 2480 typedef struct t_FmPcdManipHdrInsrtGenericParams { 2481 uint8_t offset; /**< Offset from beginning of header to the start 2482 location of the insertion */ 2483 uint8_t size; /**< Size of inserted section */ 2484 bool replace; /**< TRUE to override (replace) existing data at 2485 'offset', FALSE to insert */ 2486 uint8_t *p_Data; /**< Pointer to data to be inserted */ 2487 } t_FmPcdManipHdrInsrtGenericParams; 2488 2489 /**************************************************************************//** 2490 @Description Parameters for defining header manipulation VLAN DSCP To Vpri translation 2491 *//***************************************************************************/ 2492 typedef struct t_FmPcdManipHdrFieldUpdateVlanDscpToVpri { 2493 uint8_t dscpToVpriTable[FM_PCD_MANIP_DSCP_TO_VLAN_TRANS]; 2494 /**< A table of VPri values for each DSCP value; 2495 The index is the DSCP value (0-0x3F) and the 2496 value is the corresponding VPRI (0-15). */ 2497 uint8_t vpriDefVal; /**< 0-7, Relevant only if if updateType = 2498 e_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN, 2499 this field is the Q Tag default value if the 2500 IP header is not found. */ 2501 } t_FmPcdManipHdrFieldUpdateVlanDscpToVpri; 2502 2503 /**************************************************************************//** 2504 @Description Parameters for defining header manipulation VLAN fields updates 2505 *//***************************************************************************/ 2506 typedef struct t_FmPcdManipHdrFieldUpdateVlan { 2507 e_FmPcdManipHdrFieldUpdateVlan updateType; /**< Selects VLAN update type */ 2508 union { 2509 uint8_t vpri; /**< 0-7, Relevant only if If updateType = 2510 e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN_PRI, this 2511 is the new VLAN pri. */ 2512 t_FmPcdManipHdrFieldUpdateVlanDscpToVpri dscpToVpri; /**< Parameters structure, Relevant only if updateType 2513 = e_FM_PCD_MANIP_HDR_FIELD_UPDATE_DSCP_TO_VLAN. */ 2514 } u; 2515 } t_FmPcdManipHdrFieldUpdateVlan; 2516 2517 /**************************************************************************//** 2518 @Description Parameters for defining header manipulation IPV4 fields updates 2519 *//***************************************************************************/ 2520 typedef struct t_FmPcdManipHdrFieldUpdateIpv4 { 2521 ipv4HdrManipUpdateFlags_t validUpdates; /**< ORed flag, selecting the required updates */ 2522 uint8_t tos; /**< 8 bit New TOS; Relevant if validUpdates contains 2523 HDR_MANIP_IPV4_TOS */ 2524 uint16_t id; /**< 16 bit New IP ID; Relevant only if validUpdates 2525 contains HDR_MANIP_IPV4_ID */ 2526 uint32_t src; /**< 32 bit New IP SRC; Relevant only if validUpdates 2527 contains HDR_MANIP_IPV4_SRC */ 2528 uint32_t dst; /**< 32 bit New IP DST; Relevant only if validUpdates 2529 contains HDR_MANIP_IPV4_DST */ 2530 } t_FmPcdManipHdrFieldUpdateIpv4; 2531 2532 /**************************************************************************//** 2533 @Description Parameters for defining header manipulation IPV6 fields updates 2534 *//***************************************************************************/ 2535 typedef struct t_FmPcdManipHdrFieldUpdateIpv6 { 2536 ipv6HdrManipUpdateFlags_t validUpdates; /**< ORed flag, selecting the required updates */ 2537 uint8_t trafficClass; /**< 8 bit New Traffic Class; Relevant if validUpdates contains 2538 HDR_MANIP_IPV6_TC */ 2539 uint8_t src[NET_HEADER_FIELD_IPv6_ADDR_SIZE]; 2540 /**< 16 byte new IP SRC; Relevant only if validUpdates 2541 contains HDR_MANIP_IPV6_SRC */ 2542 uint8_t dst[NET_HEADER_FIELD_IPv6_ADDR_SIZE]; 2543 /**< 16 byte new IP DST; Relevant only if validUpdates 2544 contains HDR_MANIP_IPV6_DST */ 2545 } t_FmPcdManipHdrFieldUpdateIpv6; 2546 2547 /**************************************************************************//** 2548 @Description Parameters for defining header manipulation TCP/UDP fields updates 2549 *//***************************************************************************/ 2550 typedef struct t_FmPcdManipHdrFieldUpdateTcpUdp { 2551 tcpUdpHdrManipUpdateFlags_t validUpdates; /**< ORed flag, selecting the required updates */ 2552 uint16_t src; /**< 16 bit New TCP/UDP SRC; Relevant only if validUpdates 2553 contains HDR_MANIP_TCP_UDP_SRC */ 2554 uint16_t dst; /**< 16 bit New TCP/UDP DST; Relevant only if validUpdates 2555 contains HDR_MANIP_TCP_UDP_DST */ 2556 } t_FmPcdManipHdrFieldUpdateTcpUdp; 2557 2558 /**************************************************************************//** 2559 @Description Parameters for defining header manipulation fields updates 2560 *//***************************************************************************/ 2561 typedef struct t_FmPcdManipHdrFieldUpdateParams { 2562 e_FmPcdManipHdrFieldUpdateType type; /**< Type of header field update manipulation */ 2563 union { 2564 t_FmPcdManipHdrFieldUpdateVlan vlan; /**< Parameters for VLAN update. Relevant when 2565 type = e_FM_PCD_MANIP_HDR_FIELD_UPDATE_VLAN */ 2566 t_FmPcdManipHdrFieldUpdateIpv4 ipv4; /**< Parameters for IPv4 update. Relevant when 2567 type = e_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV4 */ 2568 t_FmPcdManipHdrFieldUpdateIpv6 ipv6; /**< Parameters for IPv6 update. Relevant when 2569 type = e_FM_PCD_MANIP_HDR_FIELD_UPDATE_IPV6 */ 2570 t_FmPcdManipHdrFieldUpdateTcpUdp tcpUdp; /**< Parameters for TCP/UDP update. Relevant when 2571 type = e_FM_PCD_MANIP_HDR_FIELD_UPDATE_TCP_UDP */ 2572 } u; 2573 } t_FmPcdManipHdrFieldUpdateParams; 2574 2575 2576 2577 /**************************************************************************//** 2578 @Description Parameters for defining custom header manipulation for generic field replacement 2579 *//***************************************************************************/ 2580 typedef struct t_FmPcdManipHdrCustomGenFieldReplace { 2581 uint8_t srcOffset; /**< Location of new data - Offset from 2582 Parse Result (>= 16, srcOffset+size <= 32, ) */ 2583 uint8_t dstOffset; /**< Location of data to be overwritten - Offset from 2584 start of frame (dstOffset + size <= 256). */ 2585 uint8_t size; /**< The number of bytes (<=16) to be replaced */ 2586 uint8_t mask; /**< Optional 1 byte mask. Set to select bits for 2587 replacement (1 - bit will be replaced); 2588 Clear to use field as is. */ 2589 uint8_t maskOffset; /**< Relevant if mask != 0; 2590 Mask offset within the replaces "size" */ 2591 } t_FmPcdManipHdrCustomGenFieldReplace; 2592 2593 /**************************************************************************//** 2594 @Description Parameters for defining custom header manipulation for IP replacement 2595 *//***************************************************************************/ 2596 typedef struct t_FmPcdManipHdrCustomIpHdrReplace { 2597 e_FmPcdManipHdrCustomIpReplace replaceType; /**< Selects replace update type */ 2598 bool decTtlHl; /**< Decrement TTL (IPV4) or Hop limit (IPV6) by 1 */ 2599 bool updateIpv4Id; /**< Relevant when replaceType = 2600 e_FM_PCD_MANIP_HDR_CUSTOM_REPLACE_IPV6_BY_IPV4 */ 2601 uint16_t id; /**< 16 bit New IP ID; Relevant only if 2602 updateIpv4Id = TRUE */ 2603 uint8_t hdrSize; /**< The size of the new IP header */ 2604 uint8_t hdr[FM_PCD_MANIP_MAX_HDR_SIZE]; 2605 /**< The new IP header */ 2606 } t_FmPcdManipHdrCustomIpHdrReplace; 2607 2608 /**************************************************************************//** 2609 @Description Parameters for defining custom header manipulation 2610 *//***************************************************************************/ 2611 typedef struct t_FmPcdManipHdrCustomParams { 2612 e_FmPcdManipHdrCustomType type; /**< Type of header field update manipulation */ 2613 union { 2614 t_FmPcdManipHdrCustomIpHdrReplace ipHdrReplace; /**< Parameters IP header replacement */ 2615 t_FmPcdManipHdrCustomGenFieldReplace genFieldReplace; /**< Parameters IP header replacement */ 2616 } u; 2617 } t_FmPcdManipHdrCustomParams; 2618 2619 /**************************************************************************//** 2620 @Description Parameters for defining specific L2 insertion manipulation 2621 *//***************************************************************************/ 2622 typedef struct t_FmPcdManipHdrInsrtSpecificL2Params { 2623 e_FmPcdManipHdrInsrtSpecificL2 specificL2; /**< Selects which L2 headers to insert */ 2624 bool update; /**< TRUE to update MPLS header */ 2625 uint8_t size; /**< size of inserted section */ 2626 uint8_t *p_Data; /**< data to be inserted */ 2627 } t_FmPcdManipHdrInsrtSpecificL2Params; 2628 2629 #if (DPAA_VERSION >= 11) 2630 /**************************************************************************//** 2631 @Description Parameters for defining IP insertion manipulation 2632 *//***************************************************************************/ 2633 typedef struct t_FmPcdManipHdrInsrtIpParams { 2634 bool calcL4Checksum; /**< Calculate L4 checksum. */ 2635 e_FmPcdManipHdrQosMappingMode mappingMode; /**< TODO */ 2636 uint8_t lastPidOffset; /**< the offset of the last Protocol within 2637 the inserted header */ 2638 uint16_t id; /**< 16 bit New IP ID */ 2639 bool dontFragOverwrite; 2640 /**< IPv4 only. DF is overwritten with the hash-result next-to-last byte. 2641 * This byte is configured to be overwritten when RPD is set. */ 2642 uint8_t lastDstOffset; 2643 /**< IPv6 only. if routing extension exist, user should set the offset of the destination address 2644 * in order to calculate UDP checksum pseudo header; 2645 * Otherwise set it to '0'. */ 2646 t_FmPcdManipHdrInsrt insrt; /**< size and data to be inserted. */ 2647 } t_FmPcdManipHdrInsrtIpParams; 2648 #endif /* (DPAA_VERSION >= 11) */ 2649 2650 /**************************************************************************//** 2651 @Description Parameters for defining header insertion manipulation by header type 2652 *//***************************************************************************/ 2653 typedef struct t_FmPcdManipHdrInsrtByHdrParams { 2654 e_FmPcdManipHdrInsrtByHdrType type; /**< Selects manipulation type */ 2655 union { 2656 2657 t_FmPcdManipHdrInsrtSpecificL2Params specificL2Params; 2658 /**< Used when type = e_FM_PCD_MANIP_INSRT_BY_HDR_SPECIFIC_L2: 2659 Selects which L2 headers to insert */ 2660 #if (DPAA_VERSION >= 11) 2661 t_FmPcdManipHdrInsrtIpParams ipParams; /**< Used when type = e_FM_PCD_MANIP_INSRT_BY_HDR_IP */ 2662 t_FmPcdManipHdrInsrt insrt; /**< Used when type is one of e_FM_PCD_MANIP_INSRT_BY_HDR_UDP, 2663 e_FM_PCD_MANIP_INSRT_BY_HDR_UDP_LITE, or 2664 e_FM_PCD_MANIP_INSRT_BY_HDR_CAPWAP */ 2665 #endif /* (DPAA_VERSION >= 11) */ 2666 } u; 2667 } t_FmPcdManipHdrInsrtByHdrParams; 2668 2669 /**************************************************************************//** 2670 @Description Parameters for defining header insertion manipulation 2671 *//***************************************************************************/ 2672 typedef struct t_FmPcdManipHdrInsrtParams { 2673 e_FmPcdManipHdrInsrtType type; /**< Type of insertion manipulation */ 2674 union { 2675 t_FmPcdManipHdrInsrtByHdrParams byHdr; /**< Parameters for defining header insertion manipulation by header type, 2676 relevant if 'type' = e_FM_PCD_MANIP_INSRT_BY_HDR */ 2677 t_FmPcdManipHdrInsrtGenericParams generic; /**< Parameters for defining generic header insertion manipulation, 2678 relevant if 'type' = e_FM_PCD_MANIP_INSRT_GENERIC */ 2679 #if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) 2680 t_FmPcdManipHdrInsrtByTemplateParams byTemplate; /**< Parameters for defining header insertion manipulation by template, 2681 relevant if 'type' = e_FM_PCD_MANIP_INSRT_BY_TEMPLATE */ 2682 #endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */ 2683 } u; 2684 } t_FmPcdManipHdrInsrtParams; 2685 2686 /**************************************************************************//** 2687 @Description Parameters for defining header removal manipulation 2688 *//***************************************************************************/ 2689 typedef struct t_FmPcdManipHdrRmvParams { 2690 e_FmPcdManipHdrRmvType type; /**< Type of header removal manipulation */ 2691 union { 2692 t_FmPcdManipHdrRmvByHdrParams byHdr; /**< Parameters for defining header removal manipulation by header type, 2693 relevant if type = e_FM_PCD_MANIP_RMV_BY_HDR */ 2694 t_FmPcdManipHdrRmvGenericParams generic; /**< Parameters for defining generic header removal manipulation, 2695 relevant if type = e_FM_PCD_MANIP_RMV_GENERIC */ 2696 } u; 2697 } t_FmPcdManipHdrRmvParams; 2698 2699 /**************************************************************************//** 2700 @Description Parameters for defining header manipulation node 2701 *//***************************************************************************/ 2702 typedef struct t_FmPcdManipHdrParams { 2703 bool rmv; /**< TRUE, to define removal manipulation */ 2704 t_FmPcdManipHdrRmvParams rmvParams; /**< Parameters for removal manipulation, relevant if 'rmv' = TRUE */ 2705 2706 bool insrt; /**< TRUE, to define insertion manipulation */ 2707 t_FmPcdManipHdrInsrtParams insrtParams; /**< Parameters for insertion manipulation, relevant if 'insrt' = TRUE */ 2708 2709 bool fieldUpdate; /**< TRUE, to define field update manipulation */ 2710 t_FmPcdManipHdrFieldUpdateParams fieldUpdateParams; /**< Parameters for field update manipulation, relevant if 'fieldUpdate' = TRUE */ 2711 2712 bool custom; /**< TRUE, to define custom manipulation */ 2713 t_FmPcdManipHdrCustomParams customParams; /**< Parameters for custom manipulation, relevant if 'custom' = TRUE */ 2714 2715 bool dontParseAfterManip;/**< TRUE to de-activate the parser after the manipulation defined in this node. 2716 Restrictions: 2717 1. MUST be set if the next engine after the CC is not another CC node 2718 (but rather Policer or Keygen), and this is the last (no h_NextManip) in a chain 2719 of manipulation nodes. This includes single nodes (i.e. no h_NextManip and 2720 also never pointed as h_NextManip of other manipulation nodes) 2721 2. MUST be set if the next engine after the CC is another CC node, and 2722 this is NOT the last manipulation node (i.e. it has h_NextManip).*/ 2723 } t_FmPcdManipHdrParams; 2724 2725 /**************************************************************************//** 2726 @Description Parameters for defining fragmentation manipulation 2727 *//***************************************************************************/ 2728 typedef struct t_FmPcdManipFragParams { 2729 e_NetHeaderType hdr; /**< Header selection */ 2730 union { 2731 #if (DPAA_VERSION >= 11) 2732 t_FmPcdManipFragCapwapParams capwapFrag; /**< Parameters for defining CAPWAP fragmentation, 2733 relevant if 'hdr' = HEADER_TYPE_CAPWAP */ 2734 #endif /* (DPAA_VERSION >= 11) */ 2735 t_FmPcdManipFragIpParams ipFrag; /**< Parameters for defining IP fragmentation, 2736 relevant if 'hdr' = HEADER_TYPE_Ipv4 or HEADER_TYPE_Ipv6 */ 2737 } u; 2738 } t_FmPcdManipFragParams; 2739 2740 /**************************************************************************//** 2741 @Description Parameters for defining reassembly manipulation 2742 *//***************************************************************************/ 2743 typedef struct t_FmPcdManipReassemParams { 2744 e_NetHeaderType hdr; /**< Header selection */ 2745 union { 2746 #if (DPAA_VERSION >= 11) 2747 t_FmPcdManipReassemCapwapParams capwapReassem; /**< Parameters for defining CAPWAP reassembly, 2748 relevant if 'hdr' = HEADER_TYPE_CAPWAP */ 2749 #endif /* (DPAA_VERSION >= 11) */ 2750 2751 t_FmPcdManipReassemIpParams ipReassem; /**< Parameters for defining IP reassembly, 2752 relevant if 'hdr' = HEADER_TYPE_Ipv4 or HEADER_TYPE_Ipv6 */ 2753 } u; 2754 } t_FmPcdManipReassemParams; 2755 2756 /**************************************************************************//** 2757 @Description Parameters for defining a manipulation node 2758 *//***************************************************************************/ 2759 typedef struct t_FmPcdManipParams { 2760 e_FmPcdManipType type; /**< Selects type of manipulation node */ 2761 union{ 2762 t_FmPcdManipHdrParams hdr; /**< Parameters for defining header manipulation node */ 2763 t_FmPcdManipReassemParams reassem; /**< Parameters for defining reassembly manipulation node */ 2764 t_FmPcdManipFragParams frag; /**< Parameters for defining fragmentation manipulation node */ 2765 t_FmPcdManipSpecialOffloadParams specialOffload; /**< Parameters for defining special offload manipulation node */ 2766 } u; 2767 2768 t_Handle h_NextManip; /**< Supported for Header Manipulation only; 2769 Handle to another (previously defined) manipulation node; 2770 Allows concatenation of manipulation actions; 2771 This parameter is optional and may be NULL. */ 2772 #if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) 2773 bool fragOrReasm; /**< TRUE, if defined fragmentation/reassembly manipulation */ 2774 t_FmPcdManipFragOrReasmParams fragOrReasmParams; /**< Parameters for fragmentation/reassembly manipulation, 2775 relevant if fragOrReasm = TRUE */ 2776 #endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */ 2777 } t_FmPcdManipParams; 2778 2779 /**************************************************************************//** 2780 @Description Structure for retrieving IP reassembly statistics 2781 *//***************************************************************************/ 2782 typedef struct t_FmPcdManipReassemIpStats { 2783 /* common counters for both IPv4 and IPv6 */ 2784 uint32_t timeout; /**< Counts the number of timeout occurrences */ 2785 uint32_t rfdPoolBusy; /**< Counts the number of failed attempts to allocate 2786 a Reassembly Frame Descriptor */ 2787 uint32_t internalBufferBusy; /**< Counts the number of times an internal buffer busy occurred */ 2788 uint32_t externalBufferBusy; /**< Counts the number of times external buffer busy occurred */ 2789 uint32_t sgFragments; /**< Counts the number of Scatter/Gather fragments */ 2790 uint32_t dmaSemaphoreDepletion; /**< Counts the number of failed attempts to allocate a DMA semaphore */ 2791 #if (DPAA_VERSION >= 11) 2792 uint32_t nonConsistentSp; /**< Counts the number of Non Consistent Storage Profile events for 2793 successfully reassembled frames */ 2794 #endif /* (DPAA_VERSION >= 11) */ 2795 struct { 2796 uint32_t successfullyReassembled; /**< Counts the number of successfully reassembled frames */ 2797 uint32_t validFragments; /**< Counts the total number of valid fragments that 2798 have been processed for all frames */ 2799 uint32_t processedFragments; /**< Counts the number of processed fragments 2800 (valid and error fragments) for all frames */ 2801 uint32_t malformedFragments; /**< Counts the number of malformed fragments processed for all frames */ 2802 uint32_t discardedFragments; /**< Counts the number of fragments discarded by the reassembly process */ 2803 uint32_t autoLearnBusy; /**< Counts the number of times a busy condition occurs when attempting 2804 to access an IP-Reassembly Automatic Learning Hash set */ 2805 uint32_t moreThan16Fragments; /**< Counts the fragment occurrences in which the number of fragments-per-frame 2806 exceeds 16 */ 2807 } specificHdrStatistics[2]; /**< slot '0' is for IPv4, slot '1' is for IPv6 */ 2808 } t_FmPcdManipReassemIpStats; 2809 2810 /**************************************************************************//** 2811 @Description Structure for retrieving IP fragmentation statistics 2812 *//***************************************************************************/ 2813 typedef struct t_FmPcdManipFragIpStats { 2814 uint32_t totalFrames; /**< Number of frames that passed through the manipulation node */ 2815 uint32_t fragmentedFrames; /**< Number of frames that were fragmented */ 2816 uint32_t generatedFragments; /**< Number of fragments that were generated */ 2817 } t_FmPcdManipFragIpStats; 2818 2819 #if (DPAA_VERSION >= 11) 2820 /**************************************************************************//** 2821 @Description Structure for retrieving CAPWAP reassembly statistics 2822 *//***************************************************************************/ 2823 typedef struct t_FmPcdManipReassemCapwapStats { 2824 uint32_t timeout; /**< Counts the number of timeout occurrences */ 2825 uint32_t rfdPoolBusy; /**< Counts the number of failed attempts to allocate 2826 a Reassembly Frame Descriptor */ 2827 uint32_t internalBufferBusy; /**< Counts the number of times an internal buffer busy occurred */ 2828 uint32_t externalBufferBusy; /**< Counts the number of times external buffer busy occurred */ 2829 uint32_t sgFragments; /**< Counts the number of Scatter/Gather fragments */ 2830 uint32_t dmaSemaphoreDepletion; /**< Counts the number of failed attempts to allocate a DMA semaphore */ 2831 uint32_t successfullyReassembled; /**< Counts the number of successfully reassembled frames */ 2832 uint32_t validFragments; /**< Counts the total number of valid fragments that 2833 have been processed for all frames */ 2834 uint32_t processedFragments; /**< Counts the number of processed fragments 2835 (valid and error fragments) for all frames */ 2836 uint32_t malformedFragments; /**< Counts the number of malformed fragments processed for all frames */ 2837 uint32_t autoLearnBusy; /**< Counts the number of times a busy condition occurs when attempting 2838 to access an Reassembly Automatic Learning Hash set */ 2839 uint32_t discardedFragments; /**< Counts the number of fragments discarded by the reassembly process */ 2840 uint32_t moreThan16Fragments; /**< Counts the fragment occurrences in which the number of fragments-per-frame 2841 exceeds 16 */ 2842 uint32_t exceedMaxReassemblyFrameLen;/**< ounts the number of times that a successful reassembled frame 2843 length exceeds MaxReassembledFrameLength value */ 2844 } t_FmPcdManipReassemCapwapStats; 2845 2846 /**************************************************************************//** 2847 @Description Structure for retrieving CAPWAP fragmentation statistics 2848 *//***************************************************************************/ 2849 typedef struct t_FmPcdManipFragCapwapStats { 2850 uint32_t totalFrames; /**< Number of frames that passed through the manipulation node */ 2851 uint32_t fragmentedFrames; /**< Number of frames that were fragmented */ 2852 uint32_t generatedFragments; /**< Number of fragments that were generated */ 2853 #if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) 2854 uint8_t sgAllocationFailure; /**< Number of allocation failure of s/g buffers */ 2855 #endif /* (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) */ 2856 } t_FmPcdManipFragCapwapStats; 2857 #endif /* (DPAA_VERSION >= 11) */ 2858 2859 /**************************************************************************//** 2860 @Description Structure for retrieving reassembly statistics 2861 *//***************************************************************************/ 2862 typedef struct t_FmPcdManipReassemStats { 2863 union { 2864 t_FmPcdManipReassemIpStats ipReassem; /**< Structure for IP reassembly statistics */ 2865 #if (DPAA_VERSION >= 11) 2866 t_FmPcdManipReassemCapwapStats capwapReassem; /**< Structure for CAPWAP reassembly statistics */ 2867 #endif /* (DPAA_VERSION >= 11) */ 2868 } u; 2869 } t_FmPcdManipReassemStats; 2870 2871 /**************************************************************************//** 2872 @Description Structure for retrieving fragmentation statistics 2873 *//***************************************************************************/ 2874 typedef struct t_FmPcdManipFragStats { 2875 union { 2876 t_FmPcdManipFragIpStats ipFrag; /**< Structure for IP fragmentation statistics */ 2877 #if (DPAA_VERSION >= 11) 2878 t_FmPcdManipFragCapwapStats capwapFrag; /**< Structure for CAPWAP fragmentation statistics */ 2879 #endif /* (DPAA_VERSION >= 11) */ 2880 } u; 2881 } t_FmPcdManipFragStats; 2882 2883 /**************************************************************************//** 2884 @Description Structure for selecting manipulation statistics 2885 *//***************************************************************************/ 2886 typedef struct t_FmPcdManipStats { 2887 union { 2888 t_FmPcdManipReassemStats reassem; /**< Structure for reassembly statistics */ 2889 t_FmPcdManipFragStats frag; /**< Structure for fragmentation statistics */ 2890 } u; 2891 } t_FmPcdManipStats; 2892 2893 #if (DPAA_VERSION >= 11) 2894 /**************************************************************************//** 2895 @Description Parameters for defining frame replicator group and its members 2896 *//***************************************************************************/ 2897 typedef struct t_FmPcdFrmReplicGroupParams { 2898 uint8_t maxNumOfEntries; /**< Maximal number of members in the group; 2899 Must be at least 2. */ 2900 uint8_t numOfEntries; /**< Number of members in the group; 2901 Must be at least 1. */ 2902 t_FmPcdCcNextEngineParams nextEngineParams[FM_PCD_FRM_REPLIC_MAX_NUM_OF_ENTRIES]; 2903 /**< Array of members' parameters */ 2904 } t_FmPcdFrmReplicGroupParams; 2905 #endif /* (DPAA_VERSION >= 11) */ 2906 2907 #if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) 2908 /**************************************************************************//** 2909 @Description structure for defining statistics node 2910 *//***************************************************************************/ 2911 typedef struct t_FmPcdStatsParams { 2912 e_FmPcdStatsType type; /**< type of statistics node */ 2913 } t_FmPcdStatsParams; 2914 #endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */ 2915 2916 /**************************************************************************//** 2917 @Function FM_PCD_NetEnvCharacteristicsSet 2918 2919 @Description Define a set of Network Environment Characteristics. 2920 2921 When setting an environment it is important to understand its 2922 application. It is not meant to describe the flows that will run 2923 on the ports using this environment, but what the user means TO DO 2924 with the PCD mechanisms in order to parse-classify-distribute those 2925 frames. 2926 By specifying a distinction unit, the user means it would use that option 2927 for distinction between frames at either a KeyGen scheme or a coarse 2928 classification action descriptor. Using interchangeable headers to define a 2929 unit means that the user is indifferent to which of the interchangeable 2930 headers is present in the frame, and wants the distinction to be based 2931 on the presence of either one of them. 2932 2933 Depending on context, there are limitations to the use of environments. A 2934 port using the PCD functionality is bound to an environment. Some or even 2935 all ports may share an environment but also an environment per port is 2936 possible. When initializing a scheme, a classification plan group (see below), 2937 or a coarse classification tree, one of the initialized environments must be 2938 stated and related to. When a port is bound to a scheme, a classification 2939 plan group, or a coarse classification tree, it MUST be bound to the same 2940 environment. 2941 2942 The different PCD modules, may relate (for flows definition) ONLY on 2943 distinction units as defined by their environment. When initializing a 2944 scheme for example, it may not choose to select IPV4 as a match for 2945 recognizing flows unless it was defined in the relating environment. In 2946 fact, to guide the user through the configuration of the PCD, each module's 2947 characterization in terms of flows is not done using protocol names, but using 2948 environment indexes. 2949 2950 In terms of HW implementation, the list of distinction units sets the LCV vectors 2951 and later used for match vector, classification plan vectors and coarse classification 2952 indexing. 2953 2954 @Param[in] h_FmPcd FM PCD module descriptor. 2955 @Param[in] p_NetEnvParams A structure of parameters for the initialization of 2956 the network environment. 2957 2958 @Return A handle to the initialized object on success; NULL code otherwise. 2959 2960 @Cautions Allowed only following FM_PCD_Init(). 2961 *//***************************************************************************/ 2962 t_Handle FM_PCD_NetEnvCharacteristicsSet(t_Handle h_FmPcd, t_FmPcdNetEnvParams *p_NetEnvParams); 2963 2964 /**************************************************************************//** 2965 @Function FM_PCD_NetEnvCharacteristicsDelete 2966 2967 @Description Deletes a set of Network Environment Characteristics. 2968 2969 @Param[in] h_NetEnv A handle to the Network environment. 2970 2971 @Return E_OK on success; Error code otherwise. 2972 *//***************************************************************************/ 2973 t_Error FM_PCD_NetEnvCharacteristicsDelete(t_Handle h_NetEnv); 2974 2975 /**************************************************************************//** 2976 @Function FM_PCD_KgSchemeSet 2977 2978 @Description Initializing or modifying and enabling a scheme for the KeyGen. 2979 This routine should be called for adding or modifying a scheme. 2980 When a scheme needs modifying, the API requires that it will be 2981 rewritten. In such a case 'modify' should be TRUE. If the 2982 routine is called for a valid scheme and 'modify' is FALSE, 2983 it will return error. 2984 2985 @Param[in] h_FmPcd If this is a new scheme - A handle to an FM PCD Module. 2986 Otherwise NULL (ignored by driver). 2987 @Param[in,out] p_SchemeParams A structure of parameters for defining the scheme 2988 2989 @Return A handle to the initialized scheme on success; NULL code otherwise. 2990 When used as "modify" (rather than for setting a new scheme), 2991 p_SchemeParams->id.h_Scheme will return NULL if action fails due to scheme 2992 BUSY state. 2993 2994 @Cautions Allowed only following FM_PCD_Init(). 2995 *//***************************************************************************/ 2996 t_Handle FM_PCD_KgSchemeSet(t_Handle h_FmPcd, 2997 t_FmPcdKgSchemeParams *p_SchemeParams); 2998 2999 /**************************************************************************//** 3000 @Function FM_PCD_KgSchemeDelete 3001 3002 @Description Deleting an initialized scheme. 3003 3004 @Param[in] h_Scheme scheme handle as returned by FM_PCD_KgSchemeSet() 3005 3006 @Return E_OK on success; Error code otherwise. 3007 3008 @Cautions Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet(). 3009 *//***************************************************************************/ 3010 t_Error FM_PCD_KgSchemeDelete(t_Handle h_Scheme); 3011 3012 /**************************************************************************//** 3013 @Function FM_PCD_KgSchemeGetCounter 3014 3015 @Description Reads scheme packet counter. 3016 3017 @Param[in] h_Scheme scheme handle as returned by FM_PCD_KgSchemeSet(). 3018 3019 @Return Counter's current value. 3020 3021 @Cautions Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet(). 3022 *//***************************************************************************/ 3023 uint32_t FM_PCD_KgSchemeGetCounter(t_Handle h_Scheme); 3024 3025 /**************************************************************************//** 3026 @Function FM_PCD_KgSchemeSetCounter 3027 3028 @Description Writes scheme packet counter. 3029 3030 @Param[in] h_Scheme scheme handle as returned by FM_PCD_KgSchemeSet(). 3031 @Param[in] value New scheme counter value - typically '0' for 3032 resetting the counter. 3033 3034 @Return E_OK on success; Error code otherwise. 3035 3036 @Cautions Allowed only following FM_PCD_Init() & FM_PCD_KgSchemeSet(). 3037 *//***************************************************************************/ 3038 t_Error FM_PCD_KgSchemeSetCounter(t_Handle h_Scheme, uint32_t value); 3039 3040 /**************************************************************************//** 3041 @Function FM_PCD_PlcrProfileSet 3042 3043 @Description Sets a profile entry in the policer profile table. 3044 The routine overrides any existing value. 3045 3046 @Param[in] h_FmPcd A handle to an FM PCD Module. 3047 @Param[in] p_Profile A structure of parameters for defining a 3048 policer profile entry. 3049 3050 @Return A handle to the initialized object on success; NULL code otherwise. 3051 When used as "modify" (rather than for setting a new profile), 3052 p_Profile->id.h_Profile will return NULL if action fails due to profile 3053 BUSY state. 3054 @Cautions Allowed only following FM_PCD_Init(). 3055 *//***************************************************************************/ 3056 t_Handle FM_PCD_PlcrProfileSet(t_Handle h_FmPcd, 3057 t_FmPcdPlcrProfileParams *p_Profile); 3058 3059 /**************************************************************************//** 3060 @Function FM_PCD_PlcrProfileDelete 3061 3062 @Description Delete a profile entry in the policer profile table. 3063 The routine set entry to invalid. 3064 3065 @Param[in] h_Profile A handle to the profile. 3066 3067 @Return E_OK on success; Error code otherwise. 3068 3069 @Cautions Allowed only following FM_PCD_Init(). 3070 *//***************************************************************************/ 3071 t_Error FM_PCD_PlcrProfileDelete(t_Handle h_Profile); 3072 3073 /**************************************************************************//** 3074 @Function FM_PCD_PlcrProfileGetCounter 3075 3076 @Description Sets an entry in the classification plan. 3077 The routine overrides any existing value. 3078 3079 @Param[in] h_Profile A handle to the profile. 3080 @Param[in] counter Counter selector. 3081 3082 @Return specific counter value. 3083 3084 @Cautions Allowed only following FM_PCD_Init(). 3085 *//***************************************************************************/ 3086 uint32_t FM_PCD_PlcrProfileGetCounter(t_Handle h_Profile, 3087 e_FmPcdPlcrProfileCounters counter); 3088 3089 /**************************************************************************//** 3090 @Function FM_PCD_PlcrProfileSetCounter 3091 3092 @Description Sets an entry in the classification plan. 3093 The routine overrides any existing value. 3094 3095 @Param[in] h_Profile A handle to the profile. 3096 @Param[in] counter Counter selector. 3097 @Param[in] value value to set counter with. 3098 3099 @Return E_OK on success; Error code otherwise. 3100 3101 @Cautions Allowed only following FM_PCD_Init(). 3102 *//***************************************************************************/ 3103 t_Error FM_PCD_PlcrProfileSetCounter(t_Handle h_Profile, 3104 e_FmPcdPlcrProfileCounters counter, 3105 uint32_t value); 3106 3107 /**************************************************************************//** 3108 @Function FM_PCD_CcRootBuild 3109 3110 @Description This routine must be called to define a complete coarse 3111 classification tree. This is the way to define coarse 3112 classification to a certain flow - the KeyGen schemes 3113 may point only to trees defined in this way. 3114 3115 @Param[in] h_FmPcd FM PCD module descriptor. 3116 @Param[in] p_Params A structure of parameters to define the tree. 3117 3118 @Return A handle to the initialized object on success; NULL code otherwise. 3119 3120 @Cautions Allowed only following FM_PCD_Init(). 3121 *//***************************************************************************/ 3122 t_Handle FM_PCD_CcRootBuild (t_Handle h_FmPcd, 3123 t_FmPcdCcTreeParams *p_Params); 3124 3125 /**************************************************************************//** 3126 @Function FM_PCD_CcRootDelete 3127 3128 @Description Deleting an built tree. 3129 3130 @Param[in] h_CcTree A handle to a CC tree. 3131 3132 @Return E_OK on success; Error code otherwise. 3133 3134 @Cautions Allowed only following FM_PCD_Init(). 3135 *//***************************************************************************/ 3136 t_Error FM_PCD_CcRootDelete(t_Handle h_CcTree); 3137 3138 /**************************************************************************//** 3139 @Function FM_PCD_CcRootModifyNextEngine 3140 3141 @Description Modify the Next Engine Parameters in the entry of the tree. 3142 3143 @Param[in] h_CcTree A handle to the tree 3144 @Param[in] grpId A Group index in the tree 3145 @Param[in] index Entry index in the group defined by grpId 3146 @Param[in] p_FmPcdCcNextEngineParams Pointer to new next engine parameters 3147 3148 @Return E_OK on success; Error code otherwise. 3149 3150 @Cautions Allowed only following FM_PCD_CcBuildTree(). 3151 *//***************************************************************************/ 3152 t_Error FM_PCD_CcRootModifyNextEngine(t_Handle h_CcTree, 3153 uint8_t grpId, 3154 uint8_t index, 3155 t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams); 3156 3157 /**************************************************************************//** 3158 @Function FM_PCD_MatchTableSet 3159 3160 @Description This routine should be called for each CC (coarse classification) 3161 node. The whole CC tree should be built bottom up so that each 3162 node points to already defined nodes. 3163 3164 @Param[in] h_FmPcd FM PCD module descriptor. 3165 @Param[in] p_Param A structure of parameters defining the CC node 3166 3167 @Return A handle to the initialized object on success; NULL code otherwise. 3168 3169 @Cautions Allowed only following FM_PCD_Init(). 3170 *//***************************************************************************/ 3171 t_Handle FM_PCD_MatchTableSet(t_Handle h_FmPcd, t_FmPcdCcNodeParams *p_Param); 3172 3173 /**************************************************************************//** 3174 @Function FM_PCD_MatchTableDelete 3175 3176 @Description Deleting an built node. 3177 3178 @Param[in] h_CcNode A handle to a CC node. 3179 3180 @Return E_OK on success; Error code otherwise. 3181 3182 @Cautions Allowed only following FM_PCD_Init(). 3183 *//***************************************************************************/ 3184 t_Error FM_PCD_MatchTableDelete(t_Handle h_CcNode); 3185 3186 /**************************************************************************//** 3187 @Function FM_PCD_MatchTableModifyMissNextEngine 3188 3189 @Description Modify the Next Engine Parameters of the Miss key case of the node. 3190 3191 @Param[in] h_CcNode A handle to the node 3192 @Param[in] p_FmPcdCcNextEngineParams Parameters for defining next engine 3193 3194 @Return E_OK on success; Error code otherwise. 3195 3196 @Cautions Allowed only following FM_PCD_MatchTableSet(); 3197 Not relevant in the case the node is of type 'INDEXED_LOOKUP'. 3198 When configuring nextEngine = e_FM_PCD_CC, note that 3199 p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different 3200 from the currently changed table. 3201 3202 *//***************************************************************************/ 3203 t_Error FM_PCD_MatchTableModifyMissNextEngine(t_Handle h_CcNode, 3204 t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams); 3205 3206 /**************************************************************************//** 3207 @Function FM_PCD_MatchTableRemoveKey 3208 3209 @Description Remove the key (including next engine parameters of this key) 3210 defined by the index of the relevant node. 3211 3212 @Param[in] h_CcNode A handle to the node 3213 @Param[in] keyIndex Key index for removing 3214 3215 @Return E_OK on success; Error code otherwise. 3216 3217 @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this 3218 node and the nodes that lead to it. 3219 *//***************************************************************************/ 3220 t_Error FM_PCD_MatchTableRemoveKey(t_Handle h_CcNode, uint16_t keyIndex); 3221 3222 /**************************************************************************//** 3223 @Function FM_PCD_MatchTableAddKey 3224 3225 @Description Add the key (including next engine parameters of this key in the 3226 index defined by the keyIndex. Note that 'FM_PCD_LAST_KEY_INDEX' 3227 may be used by user that don't care about the position of the 3228 key in the table - in that case, the key will be automatically 3229 added by the driver in the last available entry. 3230 3231 @Param[in] h_CcNode A handle to the node 3232 @Param[in] keyIndex Key index for adding. 3233 @Param[in] keySize Key size of added key 3234 @Param[in] p_KeyParams A pointer to the parameters includes 3235 new key with Next Engine Parameters 3236 3237 @Return E_OK on success; Error code otherwise. 3238 3239 @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this 3240 node and the nodes that lead to it. 3241 *//***************************************************************************/ 3242 t_Error FM_PCD_MatchTableAddKey(t_Handle h_CcNode, 3243 uint16_t keyIndex, 3244 uint8_t keySize, 3245 t_FmPcdCcKeyParams *p_KeyParams); 3246 3247 /**************************************************************************//** 3248 @Function FM_PCD_MatchTableModifyNextEngine 3249 3250 @Description Modify the Next Engine Parameters in the relevant key entry of the node. 3251 3252 @Param[in] h_CcNode A handle to the node 3253 @Param[in] keyIndex Key index for Next Engine modifications 3254 @Param[in] p_FmPcdCcNextEngineParams Parameters for defining next engine 3255 3256 @Return E_OK on success; Error code otherwise. 3257 3258 @Cautions Allowed only following FM_PCD_MatchTableSet(). 3259 When configuring nextEngine = e_FM_PCD_CC, note that 3260 p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different 3261 from the currently changed table. 3262 3263 *//***************************************************************************/ 3264 t_Error FM_PCD_MatchTableModifyNextEngine(t_Handle h_CcNode, 3265 uint16_t keyIndex, 3266 t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams); 3267 3268 /**************************************************************************//** 3269 @Function FM_PCD_MatchTableModifyKeyAndNextEngine 3270 3271 @Description Modify the key and Next Engine Parameters of this key in the 3272 index defined by the keyIndex. 3273 3274 @Param[in] h_CcNode A handle to the node 3275 @Param[in] keyIndex Key index for adding 3276 @Param[in] keySize Key size of added key 3277 @Param[in] p_KeyParams A pointer to the parameters includes 3278 modified key and modified Next Engine Parameters 3279 3280 @Return E_OK on success; Error code otherwise. 3281 3282 @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this 3283 node and the nodes that lead to it. 3284 When configuring nextEngine = e_FM_PCD_CC, note that 3285 p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different 3286 from the currently changed table. 3287 *//***************************************************************************/ 3288 t_Error FM_PCD_MatchTableModifyKeyAndNextEngine(t_Handle h_CcNode, 3289 uint16_t keyIndex, 3290 uint8_t keySize, 3291 t_FmPcdCcKeyParams *p_KeyParams); 3292 3293 /**************************************************************************//** 3294 @Function FM_PCD_MatchTableModifyKey 3295 3296 @Description Modify the key in the index defined by the keyIndex. 3297 3298 @Param[in] h_CcNode A handle to the node 3299 @Param[in] keyIndex Key index for adding 3300 @Param[in] keySize Key size of added key 3301 @Param[in] p_Key A pointer to the new key 3302 @Param[in] p_Mask A pointer to the new mask if relevant, 3303 otherwise pointer to NULL 3304 3305 @Return E_OK on success; Error code otherwise. 3306 3307 @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this 3308 node and the nodes that lead to it. 3309 *//***************************************************************************/ 3310 t_Error FM_PCD_MatchTableModifyKey(t_Handle h_CcNode, 3311 uint16_t keyIndex, 3312 uint8_t keySize, 3313 uint8_t *p_Key, 3314 uint8_t *p_Mask); 3315 3316 /**************************************************************************//** 3317 @Function FM_PCD_MatchTableFindNRemoveKey 3318 3319 @Description Remove the key (including next engine parameters of this key) 3320 defined by the key and mask. Note that this routine will search 3321 the node to locate the index of the required key (& mask) to remove. 3322 3323 @Param[in] h_CcNode A handle to the node 3324 @Param[in] keySize Key size of the one to remove. 3325 @Param[in] p_Key A pointer to the requested key to remove. 3326 @Param[in] p_Mask A pointer to the mask if relevant, 3327 otherwise pointer to NULL 3328 3329 @Return E_OK on success; Error code otherwise. 3330 3331 @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this 3332 node and the nodes that lead to it. 3333 *//***************************************************************************/ 3334 t_Error FM_PCD_MatchTableFindNRemoveKey(t_Handle h_CcNode, 3335 uint8_t keySize, 3336 uint8_t *p_Key, 3337 uint8_t *p_Mask); 3338 3339 /**************************************************************************//** 3340 @Function FM_PCD_MatchTableFindNModifyNextEngine 3341 3342 @Description Modify the Next Engine Parameters in the relevant key entry of 3343 the node. Note that this routine will search the node to locate 3344 the index of the required key (& mask) to modify. 3345 3346 @Param[in] h_CcNode A handle to the node 3347 @Param[in] keySize Key size of the one to modify. 3348 @Param[in] p_Key A pointer to the requested key to modify. 3349 @Param[in] p_Mask A pointer to the mask if relevant, 3350 otherwise pointer to NULL 3351 @Param[in] p_FmPcdCcNextEngineParams Parameters for defining next engine 3352 3353 @Return E_OK on success; Error code otherwise. 3354 3355 @Cautions Allowed only following FM_PCD_MatchTableSet(). 3356 When configuring nextEngine = e_FM_PCD_CC, note that 3357 p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different 3358 from the currently changed table. 3359 *//***************************************************************************/ 3360 t_Error FM_PCD_MatchTableFindNModifyNextEngine(t_Handle h_CcNode, 3361 uint8_t keySize, 3362 uint8_t *p_Key, 3363 uint8_t *p_Mask, 3364 t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams); 3365 3366 /**************************************************************************//** 3367 @Function FM_PCD_MatchTableFindNModifyKeyAndNextEngine 3368 3369 @Description Modify the key and Next Engine Parameters of this key in the 3370 index defined by the keyIndex. Note that this routine will search 3371 the node to locate the index of the required key (& mask) to modify. 3372 3373 @Param[in] h_CcNode A handle to the node 3374 @Param[in] keySize Key size of the one to modify. 3375 @Param[in] p_Key A pointer to the requested key to modify. 3376 @Param[in] p_Mask A pointer to the mask if relevant, 3377 otherwise pointer to NULL 3378 @Param[in] p_KeyParams A pointer to the parameters includes 3379 modified key and modified Next Engine Parameters 3380 3381 @Return E_OK on success; Error code otherwise. 3382 3383 @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this 3384 node and the nodes that lead to it. 3385 When configuring nextEngine = e_FM_PCD_CC, note that 3386 p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different 3387 from the currently changed table. 3388 *//***************************************************************************/ 3389 t_Error FM_PCD_MatchTableFindNModifyKeyAndNextEngine(t_Handle h_CcNode, 3390 uint8_t keySize, 3391 uint8_t *p_Key, 3392 uint8_t *p_Mask, 3393 t_FmPcdCcKeyParams *p_KeyParams); 3394 3395 /**************************************************************************//** 3396 @Function FM_PCD_MatchTableFindNModifyKey 3397 3398 @Description Modify the key in the index defined by the keyIndex. Note that 3399 this routine will search the node to locate the index of the 3400 required key (& mask) to modify. 3401 3402 @Param[in] h_CcNode A handle to the node 3403 @Param[in] keySize Key size of the one to modify. 3404 @Param[in] p_Key A pointer to the requested key to modify. 3405 @Param[in] p_Mask A pointer to the mask if relevant, 3406 otherwise pointer to NULL 3407 @Param[in] p_NewKey A pointer to the new key 3408 @Param[in] p_NewMask A pointer to the new mask if relevant, 3409 otherwise pointer to NULL 3410 3411 @Return E_OK on success; Error code otherwise. 3412 3413 @Cautions Allowed only following FM_PCD_MatchTableSet() was called for this 3414 node and the nodes that lead to it. 3415 *//***************************************************************************/ 3416 t_Error FM_PCD_MatchTableFindNModifyKey(t_Handle h_CcNode, 3417 uint8_t keySize, 3418 uint8_t *p_Key, 3419 uint8_t *p_Mask, 3420 uint8_t *p_NewKey, 3421 uint8_t *p_NewMask); 3422 3423 /**************************************************************************//** 3424 @Function FM_PCD_MatchTableGetKeyCounter 3425 3426 @Description This routine may be used to get a counter of specific key in a CC 3427 Node; This counter reflects how many frames passed that were matched 3428 this key. 3429 3430 @Param[in] h_CcNode A handle to the node 3431 @Param[in] keyIndex Key index for adding 3432 3433 @Return The specific key counter. 3434 3435 @Cautions Allowed only following FM_PCD_MatchTableSet(). 3436 *//***************************************************************************/ 3437 uint32_t FM_PCD_MatchTableGetKeyCounter(t_Handle h_CcNode, uint16_t keyIndex); 3438 3439 /**************************************************************************//** 3440 @Function FM_PCD_MatchTableGetKeyStatistics 3441 3442 @Description This routine may be used to get statistics counters of specific key 3443 in a CC Node. 3444 3445 If 'e_FM_PCD_CC_STATS_MODE_FRAME' and 3446 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node, 3447 these counters reflect how many frames passed that were matched 3448 this key; The total frames count will be returned in the counter 3449 of the first range (as only one frame length range was defined). 3450 If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for this node, the total 3451 frame count will be separated to frame length counters, based on 3452 provided frame length ranges. 3453 3454 @Param[in] h_CcNode A handle to the node 3455 @Param[in] keyIndex Key index for adding 3456 @Param[out] p_KeyStatistics Key statistics counters 3457 3458 @Return The specific key statistics. 3459 3460 @Cautions Allowed only following FM_PCD_MatchTableSet(). 3461 *//***************************************************************************/ 3462 t_Error FM_PCD_MatchTableGetKeyStatistics(t_Handle h_CcNode, 3463 uint16_t keyIndex, 3464 t_FmPcdCcKeyStatistics *p_KeyStatistics); 3465 3466 /**************************************************************************//** 3467 @Function FM_PCD_MatchTableGetMissStatistics 3468 3469 @Description This routine may be used to get statistics counters of miss entry 3470 in a CC Node. 3471 3472 If 'e_FM_PCD_CC_STATS_MODE_FRAME' and 3473 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node, 3474 these counters reflect how many frames were not matched to any 3475 existing key and therefore passed through the miss entry; The 3476 total frames count will be returned in the counter of the 3477 first range (as only one frame length range was defined). 3478 3479 @Param[in] h_CcNode A handle to the node 3480 @Param[out] p_MissStatistics Statistics counters for 'miss' 3481 3482 @Return The statistics for 'miss'. 3483 3484 @Cautions Allowed only following FM_PCD_MatchTableSet(). 3485 *//***************************************************************************/ 3486 t_Error FM_PCD_MatchTableGetMissStatistics(t_Handle h_CcNode, 3487 t_FmPcdCcKeyStatistics *p_MissStatistics); 3488 3489 /**************************************************************************//** 3490 @Function FM_PCD_MatchTableFindNGetKeyStatistics 3491 3492 @Description This routine may be used to get statistics counters of specific key 3493 in a CC Node. 3494 3495 If 'e_FM_PCD_CC_STATS_MODE_FRAME' and 3496 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node, 3497 these counters reflect how many frames passed that were matched 3498 this key; The total frames count will be returned in the counter 3499 of the first range (as only one frame length range was defined). 3500 If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for this node, the total 3501 frame count will be separated to frame length counters, based on 3502 provided frame length ranges. 3503 Note that this routine will search the node to locate the index 3504 of the required key based on received key parameters. 3505 3506 @Param[in] h_CcNode A handle to the node 3507 @Param[in] keySize Size of the requested key 3508 @Param[in] p_Key A pointer to the requested key 3509 @Param[in] p_Mask A pointer to the mask if relevant, 3510 otherwise pointer to NULL 3511 @Param[out] p_KeyStatistics Key statistics counters 3512 3513 @Return The specific key statistics. 3514 3515 @Cautions Allowed only following FM_PCD_MatchTableSet(). 3516 *//***************************************************************************/ 3517 t_Error FM_PCD_MatchTableFindNGetKeyStatistics(t_Handle h_CcNode, 3518 uint8_t keySize, 3519 uint8_t *p_Key, 3520 uint8_t *p_Mask, 3521 t_FmPcdCcKeyStatistics *p_KeyStatistics); 3522 3523 /**************************************************************************//* 3524 @Function FM_PCD_MatchTableGetNextEngine 3525 3526 @Description Gets NextEngine of the relevant keyIndex. 3527 3528 @Param[in] h_CcNode A handle to the node. 3529 @Param[in] keyIndex keyIndex in the relevant node. 3530 @Param[out] p_FmPcdCcNextEngineParams here updated nextEngine parameters for 3531 the relevant keyIndex of the CC Node 3532 received as parameter to this function 3533 3534 @Return E_OK on success; Error code otherwise. 3535 3536 @Cautions Allowed only following FM_PCD_Init(). 3537 *//***************************************************************************/ 3538 t_Error FM_PCD_MatchTableGetNextEngine(t_Handle h_CcNode, 3539 uint16_t keyIndex, 3540 t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams); 3541 3542 /**************************************************************************//* 3543 @Function FM_PCD_MatchTableGetIndexedHashBucket 3544 3545 @Description This routine simulates KeyGen operation on the provided key and 3546 calculates to which hash bucket it will be mapped. 3547 3548 @Param[in] h_CcNode A handle to the node. 3549 @Param[in] kgKeySize Key size as it was configured in the KG 3550 scheme that leads to this hash. 3551 @Param[in] p_KgKey Pointer to the key; must be like the key 3552 that the KG is generated, i.e. the same 3553 extraction and with mask if exist. 3554 @Param[in] kgHashShift Hash-shift as it was configured in the KG 3555 scheme that leads to this hash. 3556 @Param[out] p_CcNodeBucketHandle Pointer to the bucket of the provided key. 3557 @Param[out] p_BucketIndex Index to the bucket of the provided key 3558 @Param[out] p_LastIndex Pointer to last index in the bucket of the 3559 provided key. 3560 3561 @Return E_OK on success; Error code otherwise. 3562 3563 @Cautions Allowed only following FM_PCD_HashTableSet() 3564 *//***************************************************************************/ 3565 t_Error FM_PCD_MatchTableGetIndexedHashBucket(t_Handle h_CcNode, 3566 uint8_t kgKeySize, 3567 uint8_t *p_KgKey, 3568 uint8_t kgHashShift, 3569 t_Handle *p_CcNodeBucketHandle, 3570 uint8_t *p_BucketIndex, 3571 uint16_t *p_LastIndex); 3572 3573 /**************************************************************************//** 3574 @Function FM_PCD_HashTableSet 3575 3576 @Description This routine initializes a hash table structure. 3577 KeyGen hash result determines the hash bucket. 3578 Next, KeyGen key is compared against all keys of this 3579 bucket (exact match). 3580 Number of sets (number of buckets) of the hash equals to the 3581 number of 1-s in 'hashResMask' in the provided parameters. 3582 Number of hash table ways is then calculated by dividing 3583 'maxNumOfKeys' equally between the hash sets. This is the maximal 3584 number of keys that a hash bucket may hold. 3585 The hash table is initialized empty and keys may be 3586 added to it following the initialization. Keys masks are not 3587 supported in current hash table implementation. 3588 The initialized hash table can be integrated as a node in a 3589 CC tree. 3590 3591 @Param[in] h_FmPcd FM PCD module descriptor. 3592 @Param[in] p_Param A structure of parameters defining the hash table 3593 3594 @Return A handle to the initialized object on success; NULL code otherwise. 3595 3596 @Cautions Allowed only following FM_PCD_Init(). 3597 *//***************************************************************************/ 3598 t_Handle FM_PCD_HashTableSet(t_Handle h_FmPcd, t_FmPcdHashTableParams *p_Param); 3599 3600 /**************************************************************************//** 3601 @Function FM_PCD_HashTableDelete 3602 3603 @Description This routine deletes the provided hash table and released all 3604 its allocated resources. 3605 3606 @Param[in] h_HashTbl A handle to a hash table 3607 3608 @Return E_OK on success; Error code otherwise. 3609 3610 @Cautions Allowed only following FM_PCD_HashTableSet(). 3611 *//***************************************************************************/ 3612 t_Error FM_PCD_HashTableDelete(t_Handle h_HashTbl); 3613 3614 /**************************************************************************//** 3615 @Function FM_PCD_HashTableAddKey 3616 3617 @Description This routine adds the provided key (including next engine 3618 parameters of this key) to the hash table. 3619 The key is added as the last key of the bucket that it is 3620 mapped to. 3621 3622 @Param[in] h_HashTbl A handle to a hash table 3623 @Param[in] keySize Key size of added key 3624 @Param[in] p_KeyParams A pointer to the parameters includes 3625 new key with next engine parameters; The pointer 3626 to the key mask must be NULL, as masks are not 3627 supported in hash table implementation. 3628 3629 @Return E_OK on success; Error code otherwise. 3630 3631 @Cautions Allowed only following FM_PCD_HashTableSet(). 3632 *//***************************************************************************/ 3633 t_Error FM_PCD_HashTableAddKey(t_Handle h_HashTbl, 3634 uint8_t keySize, 3635 t_FmPcdCcKeyParams *p_KeyParams); 3636 3637 /**************************************************************************//** 3638 @Function FM_PCD_HashTableRemoveKey 3639 3640 @Description This routine removes the requested key (including next engine 3641 parameters of this key) from the hash table. 3642 3643 @Param[in] h_HashTbl A handle to a hash table 3644 @Param[in] keySize Key size of the one to remove. 3645 @Param[in] p_Key A pointer to the requested key to remove. 3646 3647 @Return E_OK on success; Error code otherwise. 3648 3649 @Cautions Allowed only following FM_PCD_HashTableSet(). 3650 *//***************************************************************************/ 3651 t_Error FM_PCD_HashTableRemoveKey(t_Handle h_HashTbl, 3652 uint8_t keySize, 3653 uint8_t *p_Key); 3654 3655 /**************************************************************************//** 3656 @Function FM_PCD_HashTableModifyNextEngine 3657 3658 @Description This routine modifies the next engine for the provided key. The 3659 key should be previously added to the hash table. 3660 3661 @Param[in] h_HashTbl A handle to a hash table 3662 @Param[in] keySize Key size of the key to modify. 3663 @Param[in] p_Key A pointer to the requested key to modify. 3664 @Param[in] p_FmPcdCcNextEngineParams A structure for defining new next engine 3665 parameters. 3666 3667 @Return E_OK on success; Error code otherwise. 3668 3669 @Cautions Allowed only following FM_PCD_HashTableSet(). 3670 When configuring nextEngine = e_FM_PCD_CC, note that 3671 p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different 3672 from the currently changed table. 3673 *//***************************************************************************/ 3674 t_Error FM_PCD_HashTableModifyNextEngine(t_Handle h_HashTbl, 3675 uint8_t keySize, 3676 uint8_t *p_Key, 3677 t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams); 3678 3679 /**************************************************************************//** 3680 @Function FM_PCD_HashTableModifyMissNextEngine 3681 3682 @Description This routine modifies the next engine on key match miss. 3683 3684 @Param[in] h_HashTbl A handle to a hash table 3685 @Param[in] p_FmPcdCcNextEngineParams A structure for defining new next engine 3686 parameters. 3687 3688 @Return E_OK on success; Error code otherwise. 3689 3690 @Cautions Allowed only following FM_PCD_HashTableSet(). 3691 When configuring nextEngine = e_FM_PCD_CC, note that 3692 p_FmPcdCcNextEngineParams->ccParams.h_CcNode must be different 3693 from the currently changed table. 3694 *//***************************************************************************/ 3695 t_Error FM_PCD_HashTableModifyMissNextEngine(t_Handle h_HashTbl, 3696 t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams); 3697 3698 /**************************************************************************//* 3699 @Function FM_PCD_HashTableGetMissNextEngine 3700 3701 @Description Gets NextEngine in case of key match miss. 3702 3703 @Param[in] h_HashTbl A handle to a hash table 3704 @Param[out] p_FmPcdCcNextEngineParams Next engine parameters for the specified 3705 hash table. 3706 3707 @Return E_OK on success; Error code otherwise. 3708 3709 @Cautions Allowed only following FM_PCD_HashTableSet(). 3710 *//***************************************************************************/ 3711 t_Error FM_PCD_HashTableGetMissNextEngine(t_Handle h_HashTbl, 3712 t_FmPcdCcNextEngineParams *p_FmPcdCcNextEngineParams); 3713 3714 /**************************************************************************//** 3715 @Function FM_PCD_HashTableFindNGetKeyStatistics 3716 3717 @Description This routine may be used to get statistics counters of specific key 3718 in a hash table. 3719 3720 If 'e_FM_PCD_CC_STATS_MODE_FRAME' and 3721 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node, 3722 these counters reflect how many frames passed that were matched 3723 this key; The total frames count will be returned in the counter 3724 of the first range (as only one frame length range was defined). 3725 If 'e_FM_PCD_CC_STATS_MODE_RMON' was set for this node, the total 3726 frame count will be separated to frame length counters, based on 3727 provided frame length ranges. 3728 Note that this routine will identify the bucket of this key in 3729 the hash table and will search the bucket to locate the index 3730 of the required key based on received key parameters. 3731 3732 @Param[in] h_HashTbl A handle to a hash table 3733 @Param[in] keySize Size of the requested key 3734 @Param[in] p_Key A pointer to the requested key 3735 @Param[out] p_KeyStatistics Key statistics counters 3736 3737 @Return The specific key statistics. 3738 3739 @Cautions Allowed only following FM_PCD_HashTableSet(). 3740 *//***************************************************************************/ 3741 t_Error FM_PCD_HashTableFindNGetKeyStatistics(t_Handle h_HashTbl, 3742 uint8_t keySize, 3743 uint8_t *p_Key, 3744 t_FmPcdCcKeyStatistics *p_KeyStatistics); 3745 3746 /**************************************************************************//** 3747 @Function FM_PCD_HashTableGetMissStatistics 3748 3749 @Description This routine may be used to get statistics counters of 'miss' 3750 entry of the a hash table. 3751 3752 If 'e_FM_PCD_CC_STATS_MODE_FRAME' and 3753 'e_FM_PCD_CC_STATS_MODE_BYTE_AND_FRAME' were set for this node, 3754 these counters reflect how many frames were not matched to any 3755 existing key and therefore passed through the miss entry; 3756 3757 @Param[in] h_HashTbl A handle to a hash table 3758 @Param[out] p_MissStatistics Statistics counters for 'miss' 3759 3760 @Return The statistics for 'miss'. 3761 3762 @Cautions Allowed only following FM_PCD_HashTableSet(). 3763 *//***************************************************************************/ 3764 t_Error FM_PCD_HashTableGetMissStatistics(t_Handle h_HashTbl, 3765 t_FmPcdCcKeyStatistics *p_MissStatistics); 3766 3767 /**************************************************************************//** 3768 @Function FM_PCD_ManipNodeSet 3769 3770 @Description This routine should be called for defining a manipulation 3771 node. A manipulation node must be defined before the CC node 3772 that precedes it. 3773 3774 @Param[in] h_FmPcd FM PCD module descriptor. 3775 @Param[in] p_FmPcdManipParams A structure of parameters defining the manipulation 3776 3777 @Return A handle to the initialized object on success; NULL code otherwise. 3778 3779 @Cautions Allowed only following FM_PCD_Init(). 3780 *//***************************************************************************/ 3781 t_Handle FM_PCD_ManipNodeSet(t_Handle h_FmPcd, t_FmPcdManipParams *p_FmPcdManipParams); 3782 3783 /**************************************************************************//** 3784 @Function FM_PCD_ManipNodeDelete 3785 3786 @Description Delete an existing manipulation node. 3787 3788 @Param[in] h_ManipNode A handle to a manipulation node. 3789 3790 @Return E_OK on success; Error code otherwise. 3791 3792 @Cautions Allowed only following FM_PCD_ManipNodeSet(). 3793 *//***************************************************************************/ 3794 t_Error FM_PCD_ManipNodeDelete(t_Handle h_ManipNode); 3795 3796 /**************************************************************************//** 3797 @Function FM_PCD_ManipGetStatistics 3798 3799 @Description Retrieve the manipulation statistics. 3800 3801 @Param[in] h_ManipNode A handle to a manipulation node. 3802 @Param[out] p_FmPcdManipStats A structure for retrieving the manipulation statistics 3803 3804 @Return E_OK on success; Error code otherwise. 3805 3806 @Cautions Allowed only following FM_PCD_ManipNodeSet(). 3807 *//***************************************************************************/ 3808 t_Error FM_PCD_ManipGetStatistics(t_Handle h_ManipNode, t_FmPcdManipStats *p_FmPcdManipStats); 3809 3810 /**************************************************************************//** 3811 @Function FM_PCD_ManipNodeReplace 3812 3813 @Description Change existing manipulation node to be according to new requirement. 3814 3815 @Param[in] h_ManipNode A handle to a manipulation node. 3816 @Param[out] p_ManipParams A structure of parameters defining the change requirement 3817 3818 @Return E_OK on success; Error code otherwise. 3819 3820 @Cautions Allowed only following FM_PCD_ManipNodeSet(). 3821 *//***************************************************************************/ 3822 t_Error FM_PCD_ManipNodeReplace(t_Handle h_ManipNode, t_FmPcdManipParams *p_ManipParams); 3823 3824 #if (DPAA_VERSION >= 11) 3825 /**************************************************************************//** 3826 @Function FM_PCD_FrmReplicSetGroup 3827 3828 @Description Initialize a Frame Replicator group. 3829 3830 @Param[in] h_FmPcd FM PCD module descriptor. 3831 @Param[in] p_FrmReplicGroupParam A structure of parameters for the initialization of 3832 the frame replicator group. 3833 3834 @Return A handle to the initialized object on success; NULL code otherwise. 3835 3836 @Cautions Allowed only following FM_PCD_Init(). 3837 *//***************************************************************************/ 3838 t_Handle FM_PCD_FrmReplicSetGroup(t_Handle h_FmPcd, t_FmPcdFrmReplicGroupParams *p_FrmReplicGroupParam); 3839 3840 /**************************************************************************//** 3841 @Function FM_PCD_FrmReplicDeleteGroup 3842 3843 @Description Delete a Frame Replicator group. 3844 3845 @Param[in] h_FrmReplicGroup A handle to the frame replicator group. 3846 3847 @Return E_OK on success; Error code otherwise. 3848 3849 @Cautions Allowed only following FM_PCD_FrmReplicSetGroup(). 3850 *//***************************************************************************/ 3851 t_Error FM_PCD_FrmReplicDeleteGroup(t_Handle h_FrmReplicGroup); 3852 3853 /**************************************************************************//** 3854 @Function FM_PCD_FrmReplicAddMember 3855 3856 @Description Add the member in the index defined by the memberIndex. 3857 3858 @Param[in] h_FrmReplicGroup A handle to the frame replicator group. 3859 @Param[in] memberIndex member index for adding. 3860 @Param[in] p_MemberParams A pointer to the new member parameters. 3861 3862 @Return E_OK on success; Error code otherwise. 3863 3864 @Cautions Allowed only following FM_PCD_FrmReplicSetGroup() of this group. 3865 *//***************************************************************************/ 3866 t_Error FM_PCD_FrmReplicAddMember(t_Handle h_FrmReplicGroup, 3867 uint16_t memberIndex, 3868 t_FmPcdCcNextEngineParams *p_MemberParams); 3869 3870 /**************************************************************************//** 3871 @Function FM_PCD_FrmReplicRemoveMember 3872 3873 @Description Remove the member defined by the index from the relevant group. 3874 3875 @Param[in] h_FrmReplicGroup A handle to the frame replicator group. 3876 @Param[in] memberIndex member index for removing. 3877 3878 @Return E_OK on success; Error code otherwise. 3879 3880 @Cautions Allowed only following FM_PCD_FrmReplicSetGroup() of this group. 3881 *//***************************************************************************/ 3882 t_Error FM_PCD_FrmReplicRemoveMember(t_Handle h_FrmReplicGroup, 3883 uint16_t memberIndex); 3884 #endif /* (DPAA_VERSION >= 11) */ 3885 3886 #if ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) 3887 /**************************************************************************//** 3888 @Function FM_PCD_StatisticsSetNode 3889 3890 @Description This routine should be called for defining a statistics node. 3891 3892 @Param[in] h_FmPcd FM PCD module descriptor. 3893 @Param[in] p_FmPcdstatsParams A structure of parameters defining the statistics 3894 3895 @Return A handle to the initialized object on success; NULL code otherwise. 3896 3897 @Cautions Allowed only following FM_PCD_Init(). 3898 *//***************************************************************************/ 3899 t_Handle FM_PCD_StatisticsSetNode(t_Handle h_FmPcd, t_FmPcdStatsParams *p_FmPcdstatsParams); 3900 #endif /* ((DPAA_VERSION == 10) && defined(FM_CAPWAP_SUPPORT)) */ 3901 3902 /** @} */ /* end of FM_PCD_Runtime_build_grp group */ 3903 /** @} */ /* end of FM_PCD_Runtime_grp group */ 3904 /** @} */ /* end of FM_PCD_grp group */ 3905 /** @} */ /* end of FM_grp group */ 3906 3907 3908 #ifdef NCSW_BACKWARD_COMPATIBLE_API 3909 #define FM_PCD_MAX_NUM_OF_INTERCHANGABLE_HDRS FM_PCD_MAX_NUM_OF_INTERCHANGEABLE_HDRS 3910 #define e_FM_PCD_MANIP_ONE_WAYS_HASH e_FM_PCD_MANIP_ONE_WAY_HASH 3911 #define e_FM_PCD_MANIP_TOW_WAYS_HASH e_FM_PCD_MANIP_TWO_WAYS_HASH 3912 3913 #define e_FM_PCD_MANIP_FRAGMENT_PACKECT e_FM_PCD_MANIP_FRAGMENT_PACKET /* Feb13 */ 3914 3915 #define FM_PCD_SetNetEnvCharacteristics(_pcd, _params) \ 3916 FM_PCD_NetEnvCharacteristicsSet(_pcd, _params) 3917 #define FM_PCD_KgSetScheme(_pcd, _params) FM_PCD_KgSchemeSet(_pcd, _params) 3918 #define FM_PCD_CcBuildTree(_pcd, _params) FM_PCD_CcRootBuild(_pcd, _params) 3919 #define FM_PCD_CcSetNode(_pcd, _params) FM_PCD_MatchTableSet(_pcd, _params) 3920 #define FM_PCD_PlcrSetProfile(_pcd, _params) FM_PCD_PlcrProfileSet(_pcd, _params) 3921 #define FM_PCD_ManipSetNode(_pcd, _params) FM_PCD_ManipNodeSet(_pcd, _params) 3922 3923 #define FM_PCD_DeleteNetEnvCharacteristics(_pcd, ...) \ 3924 FM_PCD_NetEnvCharacteristicsDelete(__VA_ARGS__) 3925 #define FM_PCD_KgDeleteScheme(_pcd, ...) \ 3926 FM_PCD_KgSchemeDelete(__VA_ARGS__) 3927 #define FM_PCD_KgGetSchemeCounter(_pcd, ...) \ 3928 FM_PCD_KgSchemeGetCounter(__VA_ARGS__) 3929 #define FM_PCD_KgSetSchemeCounter(_pcd, ...) \ 3930 FM_PCD_KgSchemeSetCounter(__VA_ARGS__) 3931 #define FM_PCD_PlcrDeleteProfile(_pcd, ...) \ 3932 FM_PCD_PlcrProfileDelete(__VA_ARGS__) 3933 #define FM_PCD_PlcrGetProfileCounter(_pcd, ...) \ 3934 FM_PCD_PlcrProfileGetCounter(__VA_ARGS__) 3935 #define FM_PCD_PlcrSetProfileCounter(_pcd, ...) \ 3936 FM_PCD_PlcrProfileSetCounter(__VA_ARGS__) 3937 #define FM_PCD_CcDeleteTree(_pcd, ...) \ 3938 FM_PCD_CcRootDelete(__VA_ARGS__) 3939 #define FM_PCD_CcTreeModifyNextEngine(_pcd, ...) \ 3940 FM_PCD_CcRootModifyNextEngine(__VA_ARGS__) 3941 #define FM_PCD_CcDeleteNode(_pcd, ...) \ 3942 FM_PCD_MatchTableDelete(__VA_ARGS__) 3943 #define FM_PCD_CcNodeModifyMissNextEngine(_pcd, ...) \ 3944 FM_PCD_MatchTableModifyMissNextEngine(__VA_ARGS__) 3945 #define FM_PCD_CcNodeRemoveKey(_pcd, ...) \ 3946 FM_PCD_MatchTableRemoveKey(__VA_ARGS__) 3947 #define FM_PCD_CcNodeAddKey(_pcd, ...) \ 3948 FM_PCD_MatchTableAddKey(__VA_ARGS__) 3949 #define FM_PCD_CcNodeModifyNextEngine(_pcd, ...) \ 3950 FM_PCD_MatchTableModifyNextEngine(__VA_ARGS__) 3951 #define FM_PCD_CcNodeModifyKeyAndNextEngine(_pcd, ...) \ 3952 FM_PCD_MatchTableModifyKeyAndNextEngine(__VA_ARGS__) 3953 #define FM_PCD_CcNodeModifyKey(_pcd, ...) \ 3954 FM_PCD_MatchTableModifyKey(__VA_ARGS__) 3955 #define FM_PCD_CcNodeFindNRemoveKey(_pcd, ...) \ 3956 FM_PCD_MatchTableFindNRemoveKey(__VA_ARGS__) 3957 #define FM_PCD_CcNodeFindNModifyNextEngine(_pcd, ...) \ 3958 FM_PCD_MatchTableFindNModifyNextEngine(__VA_ARGS__) 3959 #define FM_PCD_CcNodeFindNModifyKeyAndNextEngine(_pcd, ...) \ 3960 FM_PCD_MatchTableFindNModifyKeyAndNextEngine(__VA_ARGS__) 3961 #define FM_PCD_CcNodeFindNModifyKey(_pcd, ...) \ 3962 FM_PCD_MatchTableFindNModifyKey(__VA_ARGS__) 3963 #define FM_PCD_CcIndexedHashNodeGetBucket(_pcd, ...) \ 3964 FM_PCD_MatchTableGetIndexedHashBucket(__VA_ARGS__) 3965 #define FM_PCD_CcNodeGetNextEngine(_pcd, ...) \ 3966 FM_PCD_MatchTableGetNextEngine(__VA_ARGS__) 3967 #define FM_PCD_CcNodeGetKeyCounter(_pcd, ...) \ 3968 FM_PCD_MatchTableGetKeyCounter(__VA_ARGS__) 3969 #define FM_PCD_ManipDeleteNode(_pcd, ...) \ 3970 FM_PCD_ManipNodeDelete(__VA_ARGS__) 3971 #endif /* NCSW_BACKWARD_COMPATIBLE_API */ 3972 3973 3974 #endif /* __FM_PCD_EXT */ 3975