1#!/bin/bash
2# SPDX-License-Identifier: GPL-2.0
3#
4# In-place tunneling
5
6BPF_FILE="test_tc_tunnel.bpf.o"
7# must match the port that the bpf program filters on
8readonly port=8000
9
10readonly ns_prefix="ns-$$-"
11readonly ns1="${ns_prefix}1"
12readonly ns2="${ns_prefix}2"
13
14readonly ns1_v4=192.168.1.1
15readonly ns2_v4=192.168.1.2
16readonly ns1_v6=fd::1
17readonly ns2_v6=fd::2
18
19# Must match port used by bpf program
20readonly udpport=5555
21# MPLSoverUDP
22readonly mplsudpport=6635
23readonly mplsproto=137
24
25readonly infile="$(mktemp)"
26readonly outfile="$(mktemp)"
27
28setup() {
29	ip netns add "${ns1}"
30	ip netns add "${ns2}"
31
32	ip link add dev veth1 mtu 1500 netns "${ns1}" type veth \
33	      peer name veth2 mtu 1500 netns "${ns2}"
34
35	ip netns exec "${ns1}" ethtool -K veth1 tso off
36
37	ip -netns "${ns1}" link set veth1 up
38	ip -netns "${ns2}" link set veth2 up
39
40	ip -netns "${ns1}" -4 addr add "${ns1_v4}/24" dev veth1
41	ip -netns "${ns2}" -4 addr add "${ns2_v4}/24" dev veth2
42	ip -netns "${ns1}" -6 addr add "${ns1_v6}/64" dev veth1 nodad
43	ip -netns "${ns2}" -6 addr add "${ns2_v6}/64" dev veth2 nodad
44
45	# clamp route to reserve room for tunnel headers
46	ip -netns "${ns1}" -4 route flush table main
47	ip -netns "${ns1}" -6 route flush table main
48	ip -netns "${ns1}" -4 route add "${ns2_v4}" mtu 1450 dev veth1
49	ip -netns "${ns1}" -6 route add "${ns2_v6}" mtu 1430 dev veth1
50
51	sleep 1
52
53	dd if=/dev/urandom of="${infile}" bs="${datalen}" count=1 status=none
54}
55
56cleanup() {
57	ip netns del "${ns2}"
58	ip netns del "${ns1}"
59
60	if [[ -f "${outfile}" ]]; then
61		rm "${outfile}"
62	fi
63	if [[ -f "${infile}" ]]; then
64		rm "${infile}"
65	fi
66
67	if [[ -n $server_pid ]]; then
68		kill $server_pid 2> /dev/null
69	fi
70}
71
72server_listen() {
73	ip netns exec "${ns2}" nc "${netcat_opt}" -l "${port}" > "${outfile}" &
74	server_pid=$!
75}
76
77client_connect() {
78	ip netns exec "${ns1}" timeout 2 nc "${netcat_opt}" -w 1 "${addr2}" "${port}" < "${infile}"
79	echo $?
80}
81
82verify_data() {
83	wait "${server_pid}"
84	server_pid=
85	# sha1sum returns two fields [sha1] [filepath]
86	# convert to bash array and access first elem
87	insum=($(sha1sum ${infile}))
88	outsum=($(sha1sum ${outfile}))
89	if [[ "${insum[0]}" != "${outsum[0]}" ]]; then
90		echo "data mismatch"
91		exit 1
92	fi
93}
94
95wait_for_port() {
96	for i in $(seq 20); do
97		if ip netns exec "${ns2}" ss ${2:--4}OHntl | grep -q "$1"; then
98			return 0
99		fi
100		sleep 0.1
101	done
102	return 1
103}
104
105set -e
106
107# no arguments: automated test, run all
108if [[ "$#" -eq "0" ]]; then
109	echo "ipip"
110	$0 ipv4 ipip none 100
111
112	echo "ipip6"
113	$0 ipv4 ipip6 none 100
114
115	echo "ip6ip6"
116	$0 ipv6 ip6tnl none 100
117
118	echo "sit"
119	$0 ipv6 sit none 100
120
121	echo "ip4 vxlan"
122	$0 ipv4 vxlan eth 2000
123
124	echo "ip6 vxlan"
125	$0 ipv6 ip6vxlan eth 2000
126
127	for mac in none mpls eth ; do
128		echo "ip gre $mac"
129		$0 ipv4 gre $mac 100
130
131		echo "ip6 gre $mac"
132		$0 ipv6 ip6gre $mac 100
133
134		echo "ip gre $mac gso"
135		$0 ipv4 gre $mac 2000
136
137		echo "ip6 gre $mac gso"
138		$0 ipv6 ip6gre $mac 2000
139
140		echo "ip udp $mac"
141		$0 ipv4 udp $mac 100
142
143		echo "ip6 udp $mac"
144		$0 ipv6 ip6udp $mac 100
145
146		echo "ip udp $mac gso"
147		$0 ipv4 udp $mac 2000
148
149		echo "ip6 udp $mac gso"
150		$0 ipv6 ip6udp $mac 2000
151	done
152
153	echo "OK. All tests passed"
154	exit 0
155fi
156
157if [[ "$#" -ne "4" ]]; then
158	echo "Usage: $0"
159	echo "   or: $0 <ipv4|ipv6> <tuntype> <none|mpls|eth> <data_len>"
160	exit 1
161fi
162
163case "$1" in
164"ipv4")
165	readonly addr1="${ns1_v4}"
166	readonly addr2="${ns2_v4}"
167	readonly ipproto=4
168	readonly netcat_opt=-${ipproto}
169	readonly foumod=fou
170	readonly foutype=ipip
171	readonly fouproto=4
172	readonly fouproto_mpls=${mplsproto}
173	readonly gretaptype=gretap
174	;;
175"ipv6")
176	readonly addr1="${ns1_v6}"
177	readonly addr2="${ns2_v6}"
178	readonly ipproto=6
179	readonly netcat_opt=-${ipproto}
180	readonly foumod=fou6
181	readonly foutype=ip6tnl
182	readonly fouproto="41 -6"
183	readonly fouproto_mpls="${mplsproto} -6"
184	readonly gretaptype=ip6gretap
185	;;
186*)
187	echo "unknown arg: $1"
188	exit 1
189	;;
190esac
191
192readonly tuntype=$2
193readonly mac=$3
194readonly datalen=$4
195
196echo "encap ${addr1} to ${addr2}, type ${tuntype}, mac ${mac} len ${datalen}"
197
198trap cleanup EXIT
199
200setup
201
202# basic communication works
203echo "test basic connectivity"
204server_listen
205wait_for_port ${port} ${netcat_opt}
206client_connect
207verify_data
208
209# clientside, insert bpf program to encap all TCP to port ${port}
210# client can no longer connect
211ip netns exec "${ns1}" tc qdisc add dev veth1 clsact
212ip netns exec "${ns1}" tc filter add dev veth1 egress \
213	bpf direct-action object-file ${BPF_FILE} \
214	section "encap_${tuntype}_${mac}"
215echo "test bpf encap without decap (expect failure)"
216server_listen
217wait_for_port ${port} ${netcat_opt}
218! client_connect
219
220if [[ "$tuntype" =~ "udp" ]]; then
221	# Set up fou tunnel.
222	ttype="${foutype}"
223	targs="encap fou encap-sport auto encap-dport $udpport"
224	# fou may be a module; allow this to fail.
225	modprobe "${foumod}" ||true
226	if [[ "$mac" == "mpls" ]]; then
227		dport=${mplsudpport}
228		dproto=${fouproto_mpls}
229		tmode="mode any ttl 255"
230	else
231		dport=${udpport}
232		dproto=${fouproto}
233	fi
234	ip netns exec "${ns2}" ip fou add port $dport ipproto ${dproto}
235	targs="encap fou encap-sport auto encap-dport $dport"
236elif [[ "$tuntype" =~ "gre" && "$mac" == "eth" ]]; then
237	ttype=$gretaptype
238elif [[ "$tuntype" =~ "vxlan" && "$mac" == "eth" ]]; then
239	ttype="vxlan"
240	targs="id 1 dstport 8472 udp6zerocsumrx"
241elif [[ "$tuntype" == "ipip6" ]]; then
242	ttype="ip6tnl"
243	targs=""
244else
245	ttype=$tuntype
246	targs=""
247fi
248
249# tunnel address family differs from inner for SIT
250if [[ "${tuntype}" == "sit" ]]; then
251	link_addr1="${ns1_v4}"
252	link_addr2="${ns2_v4}"
253elif [[ "${tuntype}" == "ipip6" ]]; then
254	link_addr1="${ns1_v6}"
255	link_addr2="${ns2_v6}"
256else
257	link_addr1="${addr1}"
258	link_addr2="${addr2}"
259fi
260
261# serverside, insert decap module
262# server is still running
263# client can connect again
264ip netns exec "${ns2}" ip link add name testtun0 type "${ttype}" \
265	${tmode} remote "${link_addr1}" local "${link_addr2}" $targs
266
267expect_tun_fail=0
268
269if [[ "$tuntype" == "ip6udp" && "$mac" == "mpls" ]]; then
270	# No support for MPLS IPv6 fou tunnel; expect failure.
271	expect_tun_fail=1
272elif [[ "$tuntype" =~ "udp" && "$mac" == "eth" ]]; then
273	# No support for TEB fou tunnel; expect failure.
274	expect_tun_fail=1
275elif [[ "$tuntype" =~ (gre|vxlan) && "$mac" == "eth" ]]; then
276	# Share ethernet address between tunnel/veth2 so L2 decap works.
277	ethaddr=$(ip netns exec "${ns2}" ip link show veth2 | \
278		  awk '/ether/ { print $2 }')
279	ip netns exec "${ns2}" ip link set testtun0 address $ethaddr
280elif [[ "$mac" == "mpls" ]]; then
281	modprobe mpls_iptunnel ||true
282	modprobe mpls_gso ||true
283	ip netns exec "${ns2}" sysctl -qw net.mpls.platform_labels=65536
284	ip netns exec "${ns2}" ip -f mpls route add 1000 dev lo
285	ip netns exec "${ns2}" ip link set lo up
286	ip netns exec "${ns2}" sysctl -qw net.mpls.conf.testtun0.input=1
287	ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.lo.rp_filter=0
288fi
289
290# Because packets are decapped by the tunnel they arrive on testtun0 from
291# the IP stack perspective.  Ensure reverse path filtering is disabled
292# otherwise we drop the TCP SYN as arriving on testtun0 instead of the
293# expected veth2 (veth2 is where 192.168.1.2 is configured).
294ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.all.rp_filter=0
295# rp needs to be disabled for both all and testtun0 as the rp value is
296# selected as the max of the "all" and device-specific values.
297ip netns exec "${ns2}" sysctl -qw net.ipv4.conf.testtun0.rp_filter=0
298ip netns exec "${ns2}" ip link set dev testtun0 up
299if [[ "$expect_tun_fail" == 1 ]]; then
300	# This tunnel mode is not supported, so we expect failure.
301	echo "test bpf encap with tunnel device decap (expect failure)"
302	! client_connect
303else
304	echo "test bpf encap with tunnel device decap"
305	client_connect
306	verify_data
307	server_listen
308fi
309
310# serverside, use BPF for decap
311ip netns exec "${ns2}" ip link del dev testtun0
312ip netns exec "${ns2}" tc qdisc add dev veth2 clsact
313ip netns exec "${ns2}" tc filter add dev veth2 ingress \
314	bpf direct-action object-file ${BPF_FILE} section decap
315echo "test bpf encap with bpf decap"
316client_connect
317verify_data
318
319echo OK
320