xref: /openbsd/gnu/gcc/gcc/config/m68k/predicates.md (revision 404b540a)
1;; Predicate definitions for Motorola 68000.
2;; Copyright (C) 2005 Free Software Foundation, Inc.
3;;
4;; This file is part of GCC.
5;;
6;; GCC is free software; you can redistribute it and/or modify
7;; it under the terms of the GNU General Public License as published by
8;; the Free Software Foundation; either version 2, or (at your option)
9;; any later version.
10;;
11;; GCC is distributed in the hope that it will be useful,
12;; but WITHOUT ANY WARRANTY; without even the implied warranty of
13;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14;; GNU General Public License for more details.
15;;
16;; You should have received a copy of the GNU General Public License
17;; along with GCC; see the file COPYING.  If not, write to
18;; the Free Software Foundation, 51 Franklin Street, Fifth Floor,
19;; Boston, MA 02110-1301, USA.
20
21;; Special case of a general operand that's used as a source
22;; operand. Use this to permit reads from PC-relative memory when
23;; -mpcrel is specified.
24
25(define_predicate "general_src_operand"
26  (match_code "const_int,const_double,const,symbol_ref,label_ref,subreg,reg,mem")
27{
28  if (TARGET_PCREL
29      && GET_CODE (op) == MEM
30      && (GET_CODE (XEXP (op, 0)) == SYMBOL_REF
31	  || GET_CODE (XEXP (op, 0)) == LABEL_REF
32	  || GET_CODE (XEXP (op, 0)) == CONST))
33    return 1;
34  return general_operand (op, mode);
35})
36
37;; Special case of a nonimmediate operand that's used as a source. Use
38;; this to permit reads from PC-relative memory when -mpcrel is
39;; specified.
40
41(define_predicate "nonimmediate_src_operand"
42  (match_code "subreg,reg,mem")
43{
44  if (TARGET_PCREL && GET_CODE (op) == MEM
45      && (GET_CODE (XEXP (op, 0)) == SYMBOL_REF
46	  || GET_CODE (XEXP (op, 0)) == LABEL_REF
47	  || GET_CODE (XEXP (op, 0)) == CONST))
48    return 1;
49  return nonimmediate_operand (op, mode);
50})
51
52;; Special case of a memory operand that's used as a source. Use this
53;; to permit reads from PC-relative memory when -mpcrel is specified.
54
55(define_predicate "memory_src_operand"
56  (match_code "subreg,mem")
57{
58  if (TARGET_PCREL && GET_CODE (op) == MEM
59      && (GET_CODE (XEXP (op, 0)) == SYMBOL_REF
60	  || GET_CODE (XEXP (op, 0)) == LABEL_REF
61	  || GET_CODE (XEXP (op, 0)) == CONST))
62    return 1;
63  return memory_operand (op, mode);
64})
65
66;; Similar to general_operand, but exclude stack_pointer_rtx.
67
68(define_predicate "not_sp_operand"
69  (match_code "subreg,reg,mem")
70{
71  return op != stack_pointer_rtx && nonimmediate_operand (op, mode);
72})
73
74;; Predicate that accepts only a pc-relative address.  This is needed
75;; because pc-relative addresses don't satisfy the predicate
76;; "general_src_operand".
77
78(define_predicate "pcrel_address"
79  (match_code "symbol_ref,label_ref,const"))
80
81;; Accept integer operands in the range 0..0xffffffff.  We have to
82;; check the range carefully since this predicate is used in DImode
83;; contexts.  Also, we need some extra crud to make it work when
84;; hosted on 64-bit machines.
85
86(define_predicate "const_uint32_operand"
87  (match_code "const_int,const_double")
88{
89  /* It doesn't make sense to ask this question with a mode that is
90     not larger than 32 bits.  */
91  gcc_assert (GET_MODE_BITSIZE (mode) > 32);
92
93#if HOST_BITS_PER_WIDE_INT > 32
94  /* All allowed constants will fit a CONST_INT.  */
95  return (GET_CODE (op) == CONST_INT
96	  && (INTVAL (op) >= 0 && INTVAL (op) <= 0xffffffffL));
97#else
98  return (GET_CODE (op) == CONST_INT
99	  || (GET_CODE (op) == CONST_DOUBLE && CONST_DOUBLE_HIGH (op) == 0));
100#endif
101})
102
103;; Accept integer operands in the range -0x80000000..0x7fffffff.  We
104;; have to check the range carefully since this predicate is used in
105;; DImode contexts.
106
107(define_predicate "const_sint32_operand"
108  (match_code "const_int")
109{
110  /* It doesn't make sense to ask this question with a mode that is
111     not larger than 32 bits.  */
112  gcc_assert (GET_MODE_BITSIZE (mode) > 32);
113
114  /* All allowed constants will fit a CONST_INT.  */
115  return (GET_CODE (op) == CONST_INT
116	  && (INTVAL (op) >= (-0x7fffffff - 1) && INTVAL (op) <= 0x7fffffff));
117})
118
119;; Return true if X is a valid comparison operator for the dbcc
120;; instruction.  Note it rejects floating point comparison
121;; operators. (In the future we could use Fdbcc).  It also rejects
122;; some comparisons when CC_NO_OVERFLOW is set.
123
124(define_predicate "valid_dbcc_comparison_p"
125  (and (match_code "eq,ne,gtu,ltu,geu,leu,gt,lt,ge,le")
126       (match_test "valid_dbcc_comparison_p_2 (op, mode)")))
127
128;; Check for sign_extend or zero_extend.  Used for bit-count operands.
129
130(define_predicate "extend_operator"
131  (match_code "sign_extend,zero_extend"))
132
133;; Returns true if OP is either a symbol reference or a sum of a
134;; symbol reference and a constant.
135
136(define_predicate "symbolic_operand"
137  (match_code "symbol_ref,label_ref,const")
138{
139  switch (GET_CODE (op))
140    {
141    case SYMBOL_REF:
142    case LABEL_REF:
143      return true;
144
145    case CONST:
146      op = XEXP (op, 0);
147      return ((GET_CODE (XEXP (op, 0)) == SYMBOL_REF
148	       || GET_CODE (XEXP (op, 0)) == LABEL_REF)
149	      && GET_CODE (XEXP (op, 1)) == CONST_INT);
150
151#if 0 /* Deleted, with corresponding change in m68k.h,
152	 so as to fit the specs.  No CONST_DOUBLE is ever symbolic.  */
153    case CONST_DOUBLE:
154      return GET_MODE (op) == mode;
155#endif
156
157    default:
158      return false;
159    }
160})
161
162;; TODO: Add a comment here.
163
164(define_predicate "post_inc_operand"
165  (and (match_code "mem")
166       (match_test "GET_CODE (XEXP (op, 0)) == POST_INC")))
167
168;; TODO: Add a comment here.
169
170(define_predicate "pre_dec_operand"
171  (and (match_code "mem")
172       (match_test "GET_CODE (XEXP (op, 0)) == PRE_DEC")))
173