xref: /qemu/hw/isa/vt82c686.c (revision 7a4e543d)
1 /*
2  * VT82C686B south bridge support
3  *
4  * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
5  * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
6  * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
7  * This code is licensed under the GNU GPL v2.
8  *
9  * Contributions after 2012-01-13 are licensed under the terms of the
10  * GNU GPL, version 2 or (at your option) any later version.
11  */
12 
13 #include "qemu/osdep.h"
14 #include "hw/hw.h"
15 #include "hw/i386/pc.h"
16 #include "hw/isa/vt82c686.h"
17 #include "hw/i2c/i2c.h"
18 #include "hw/i2c/smbus.h"
19 #include "hw/pci/pci.h"
20 #include "hw/isa/isa.h"
21 #include "hw/sysbus.h"
22 #include "hw/mips/mips.h"
23 #include "hw/isa/apm.h"
24 #include "hw/acpi/acpi.h"
25 #include "hw/i2c/pm_smbus.h"
26 #include "sysemu/sysemu.h"
27 #include "qemu/timer.h"
28 #include "exec/address-spaces.h"
29 
30 //#define DEBUG_VT82C686B
31 
32 #ifdef DEBUG_VT82C686B
33 #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__)
34 #else
35 #define DPRINTF(fmt, ...)
36 #endif
37 
38 typedef struct SuperIOConfig
39 {
40     uint8_t config[0x100];
41     uint8_t index;
42     uint8_t data;
43 } SuperIOConfig;
44 
45 typedef struct VT82C686BState {
46     PCIDevice dev;
47     MemoryRegion superio;
48     SuperIOConfig superio_conf;
49 } VT82C686BState;
50 
51 #define TYPE_VT82C686B_DEVICE "VT82C686B"
52 #define VT82C686B_DEVICE(obj) \
53     OBJECT_CHECK(VT82C686BState, (obj), TYPE_VT82C686B_DEVICE)
54 
55 static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data,
56                                   unsigned size)
57 {
58     SuperIOConfig *superio_conf = opaque;
59 
60     DPRINTF("superio_ioport_writeb  address 0x%x  val 0x%x\n", addr, data);
61     if (addr == 0x3f0) {
62         superio_conf->index = data & 0xff;
63     } else {
64         bool can_write = true;
65         /* 0x3f1 */
66         switch (superio_conf->index) {
67         case 0x00 ... 0xdf:
68         case 0xe4:
69         case 0xe5:
70         case 0xe9 ... 0xed:
71         case 0xf3:
72         case 0xf5:
73         case 0xf7:
74         case 0xf9 ... 0xfb:
75         case 0xfd ... 0xff:
76             can_write = false;
77             break;
78         case 0xe7:
79             if ((data & 0xff) != 0xfe) {
80                 DPRINTF("change uart 1 base. unsupported yet\n");
81                 can_write = false;
82             }
83             break;
84         case 0xe8:
85             if ((data & 0xff) != 0xbe) {
86                 DPRINTF("change uart 2 base. unsupported yet\n");
87                 can_write = false;
88             }
89             break;
90         default:
91             break;
92 
93         }
94         if (can_write) {
95             superio_conf->config[superio_conf->index] = data & 0xff;
96         }
97     }
98 }
99 
100 static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size)
101 {
102     SuperIOConfig *superio_conf = opaque;
103 
104     DPRINTF("superio_ioport_readb  address 0x%x\n", addr);
105     return (superio_conf->config[superio_conf->index]);
106 }
107 
108 static const MemoryRegionOps superio_ops = {
109     .read = superio_ioport_readb,
110     .write = superio_ioport_writeb,
111     .endianness = DEVICE_NATIVE_ENDIAN,
112     .impl = {
113         .min_access_size = 1,
114         .max_access_size = 1,
115     },
116 };
117 
118 static void vt82c686b_reset(void * opaque)
119 {
120     PCIDevice *d = opaque;
121     uint8_t *pci_conf = d->config;
122     VT82C686BState *vt82c = VT82C686B_DEVICE(d);
123 
124     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
125     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
126                  PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
127     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
128 
129     pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
130     pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
131     pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
132     pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
133     pci_conf[0x59] = 0x04;
134     pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
135     pci_conf[0x5f] = 0x04;
136     pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
137 
138     vt82c->superio_conf.config[0xe0] = 0x3c;
139     vt82c->superio_conf.config[0xe2] = 0x03;
140     vt82c->superio_conf.config[0xe3] = 0xfc;
141     vt82c->superio_conf.config[0xe6] = 0xde;
142     vt82c->superio_conf.config[0xe7] = 0xfe;
143     vt82c->superio_conf.config[0xe8] = 0xbe;
144 }
145 
146 /* write config pci function0 registers. PCI-ISA bridge */
147 static void vt82c686b_write_config(PCIDevice * d, uint32_t address,
148                                    uint32_t val, int len)
149 {
150     VT82C686BState *vt686 = VT82C686B_DEVICE(d);
151 
152     DPRINTF("vt82c686b_write_config  address 0x%x  val 0x%x len 0x%x\n",
153            address, val, len);
154 
155     pci_default_write_config(d, address, val, len);
156     if (address == 0x85) {  /* enable or disable super IO configure */
157         memory_region_set_enabled(&vt686->superio, val & 0x2);
158     }
159 }
160 
161 #define ACPI_DBG_IO_ADDR  0xb044
162 
163 typedef struct VT686PMState {
164     PCIDevice dev;
165     MemoryRegion io;
166     ACPIREGS ar;
167     APMState apm;
168     PMSMBus smb;
169     uint32_t smb_io_base;
170 } VT686PMState;
171 
172 typedef struct VT686AC97State {
173     PCIDevice dev;
174 } VT686AC97State;
175 
176 typedef struct VT686MC97State {
177     PCIDevice dev;
178 } VT686MC97State;
179 
180 #define TYPE_VT82C686B_PM_DEVICE "VT82C686B_PM"
181 #define VT82C686B_PM_DEVICE(obj) \
182     OBJECT_CHECK(VT686PMState, (obj), TYPE_VT82C686B_PM_DEVICE)
183 
184 #define TYPE_VT82C686B_MC97_DEVICE "VT82C686B_MC97"
185 #define VT82C686B_MC97_DEVICE(obj) \
186     OBJECT_CHECK(VT686MC97State, (obj), TYPE_VT82C686B_MC97_DEVICE)
187 
188 #define TYPE_VT82C686B_AC97_DEVICE "VT82C686B_AC97"
189 #define VT82C686B_AC97_DEVICE(obj) \
190     OBJECT_CHECK(VT686AC97State, (obj), TYPE_VT82C686B_AC97_DEVICE)
191 
192 static void pm_update_sci(VT686PMState *s)
193 {
194     int sci_level, pmsts;
195 
196     pmsts = acpi_pm1_evt_get_sts(&s->ar);
197     sci_level = (((pmsts & s->ar.pm1.evt.en) &
198                   (ACPI_BITMASK_RT_CLOCK_ENABLE |
199                    ACPI_BITMASK_POWER_BUTTON_ENABLE |
200                    ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
201                    ACPI_BITMASK_TIMER_ENABLE)) != 0);
202     pci_set_irq(&s->dev, sci_level);
203     /* schedule a timer interruption if needed */
204     acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
205                        !(pmsts & ACPI_BITMASK_TIMER_STATUS));
206 }
207 
208 static void pm_tmr_timer(ACPIREGS *ar)
209 {
210     VT686PMState *s = container_of(ar, VT686PMState, ar);
211     pm_update_sci(s);
212 }
213 
214 static void pm_io_space_update(VT686PMState *s)
215 {
216     uint32_t pm_io_base;
217 
218     pm_io_base = pci_get_long(s->dev.config + 0x40);
219     pm_io_base &= 0xffc0;
220 
221     memory_region_transaction_begin();
222     memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1);
223     memory_region_set_address(&s->io, pm_io_base);
224     memory_region_transaction_commit();
225 }
226 
227 static void pm_write_config(PCIDevice *d,
228                             uint32_t address, uint32_t val, int len)
229 {
230     DPRINTF("pm_write_config  address 0x%x  val 0x%x len 0x%x\n",
231            address, val, len);
232     pci_default_write_config(d, address, val, len);
233 }
234 
235 static int vmstate_acpi_post_load(void *opaque, int version_id)
236 {
237     VT686PMState *s = opaque;
238 
239     pm_io_space_update(s);
240     return 0;
241 }
242 
243 static const VMStateDescription vmstate_acpi = {
244     .name = "vt82c686b_pm",
245     .version_id = 1,
246     .minimum_version_id = 1,
247     .post_load = vmstate_acpi_post_load,
248     .fields = (VMStateField[]) {
249         VMSTATE_PCI_DEVICE(dev, VT686PMState),
250         VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState),
251         VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState),
252         VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState),
253         VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),
254         VMSTATE_TIMER_PTR(ar.tmr.timer, VT686PMState),
255         VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState),
256         VMSTATE_END_OF_LIST()
257     }
258 };
259 
260 /*
261  * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
262  * just register a PCI device now, functionalities will be implemented later.
263  */
264 
265 static void vt82c686b_ac97_realize(PCIDevice *dev, Error **errp)
266 {
267     VT686AC97State *s = VT82C686B_AC97_DEVICE(dev);
268     uint8_t *pci_conf = s->dev.config;
269 
270     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
271                  PCI_COMMAND_PARITY);
272     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST |
273                  PCI_STATUS_DEVSEL_MEDIUM);
274     pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
275 }
276 
277 void vt82c686b_ac97_init(PCIBus *bus, int devfn)
278 {
279     PCIDevice *dev;
280 
281     dev = pci_create(bus, devfn, TYPE_VT82C686B_AC97_DEVICE);
282     qdev_init_nofail(&dev->qdev);
283 }
284 
285 static void via_ac97_class_init(ObjectClass *klass, void *data)
286 {
287     DeviceClass *dc = DEVICE_CLASS(klass);
288     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
289 
290     k->realize = vt82c686b_ac97_realize;
291     k->vendor_id = PCI_VENDOR_ID_VIA;
292     k->device_id = PCI_DEVICE_ID_VIA_AC97;
293     k->revision = 0x50;
294     k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO;
295     set_bit(DEVICE_CATEGORY_SOUND, dc->categories);
296     dc->desc = "AC97";
297 }
298 
299 static const TypeInfo via_ac97_info = {
300     .name          = TYPE_VT82C686B_AC97_DEVICE,
301     .parent        = TYPE_PCI_DEVICE,
302     .instance_size = sizeof(VT686AC97State),
303     .class_init    = via_ac97_class_init,
304 };
305 
306 static void vt82c686b_mc97_realize(PCIDevice *dev, Error **errp)
307 {
308     VT686MC97State *s = VT82C686B_MC97_DEVICE(dev);
309     uint8_t *pci_conf = s->dev.config;
310 
311     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
312                  PCI_COMMAND_VGA_PALETTE);
313     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
314     pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
315 }
316 
317 void vt82c686b_mc97_init(PCIBus *bus, int devfn)
318 {
319     PCIDevice *dev;
320 
321     dev = pci_create(bus, devfn, TYPE_VT82C686B_MC97_DEVICE);
322     qdev_init_nofail(&dev->qdev);
323 }
324 
325 static void via_mc97_class_init(ObjectClass *klass, void *data)
326 {
327     DeviceClass *dc = DEVICE_CLASS(klass);
328     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
329 
330     k->realize = vt82c686b_mc97_realize;
331     k->vendor_id = PCI_VENDOR_ID_VIA;
332     k->device_id = PCI_DEVICE_ID_VIA_MC97;
333     k->class_id = PCI_CLASS_COMMUNICATION_OTHER;
334     k->revision = 0x30;
335     set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
336     dc->desc = "MC97";
337 }
338 
339 static const TypeInfo via_mc97_info = {
340     .name          = TYPE_VT82C686B_MC97_DEVICE,
341     .parent        = TYPE_PCI_DEVICE,
342     .instance_size = sizeof(VT686MC97State),
343     .class_init    = via_mc97_class_init,
344 };
345 
346 /* vt82c686 pm init */
347 static void vt82c686b_pm_realize(PCIDevice *dev, Error **errp)
348 {
349     VT686PMState *s = VT82C686B_PM_DEVICE(dev);
350     uint8_t *pci_conf;
351 
352     pci_conf = s->dev.config;
353     pci_set_word(pci_conf + PCI_COMMAND, 0);
354     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
355                  PCI_STATUS_DEVSEL_MEDIUM);
356 
357     /* 0x48-0x4B is Power Management I/O Base */
358     pci_set_long(pci_conf + 0x48, 0x00000001);
359 
360     /* SMB ports:0xeee0~0xeeef */
361     s->smb_io_base =((s->smb_io_base & 0xfff0) + 0x0);
362     pci_conf[0x90] = s->smb_io_base | 1;
363     pci_conf[0x91] = s->smb_io_base >> 8;
364     pci_conf[0xd2] = 0x90;
365     pm_smbus_init(&s->dev.qdev, &s->smb);
366     memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io);
367 
368     apm_init(dev, &s->apm, NULL, s);
369 
370     memory_region_init(&s->io, OBJECT(dev), "vt82c686-pm", 64);
371     memory_region_set_enabled(&s->io, false);
372     memory_region_add_subregion(get_system_io(), 0, &s->io);
373 
374     acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
375     acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
376     acpi_pm1_cnt_init(&s->ar, &s->io, false, false, 2);
377 }
378 
379 I2CBus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
380                           qemu_irq sci_irq)
381 {
382     PCIDevice *dev;
383     VT686PMState *s;
384 
385     dev = pci_create(bus, devfn, TYPE_VT82C686B_PM_DEVICE);
386     qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
387 
388     s = VT82C686B_PM_DEVICE(dev);
389 
390     qdev_init_nofail(&dev->qdev);
391 
392     return s->smb.smbus;
393 }
394 
395 static Property via_pm_properties[] = {
396     DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),
397     DEFINE_PROP_END_OF_LIST(),
398 };
399 
400 static void via_pm_class_init(ObjectClass *klass, void *data)
401 {
402     DeviceClass *dc = DEVICE_CLASS(klass);
403     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
404 
405     k->realize = vt82c686b_pm_realize;
406     k->config_write = pm_write_config;
407     k->vendor_id = PCI_VENDOR_ID_VIA;
408     k->device_id = PCI_DEVICE_ID_VIA_ACPI;
409     k->class_id = PCI_CLASS_BRIDGE_OTHER;
410     k->revision = 0x40;
411     dc->desc = "PM";
412     dc->vmsd = &vmstate_acpi;
413     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
414     dc->props = via_pm_properties;
415 }
416 
417 static const TypeInfo via_pm_info = {
418     .name          = TYPE_VT82C686B_PM_DEVICE,
419     .parent        = TYPE_PCI_DEVICE,
420     .instance_size = sizeof(VT686PMState),
421     .class_init    = via_pm_class_init,
422 };
423 
424 static const VMStateDescription vmstate_via = {
425     .name = "vt82c686b",
426     .version_id = 1,
427     .minimum_version_id = 1,
428     .fields = (VMStateField[]) {
429         VMSTATE_PCI_DEVICE(dev, VT82C686BState),
430         VMSTATE_END_OF_LIST()
431     }
432 };
433 
434 /* init the PCI-to-ISA bridge */
435 static void vt82c686b_realize(PCIDevice *d, Error **errp)
436 {
437     VT82C686BState *vt82c = VT82C686B_DEVICE(d);
438     uint8_t *pci_conf;
439     ISABus *isa_bus;
440     uint8_t *wmask;
441     int i;
442 
443     isa_bus = isa_bus_new(DEVICE(d), get_system_memory(),
444                           pci_address_space_io(d), errp);
445     if (!isa_bus) {
446         return;
447     }
448 
449     pci_conf = d->config;
450     pci_config_set_prog_interface(pci_conf, 0x0);
451 
452     wmask = d->wmask;
453     for (i = 0x00; i < 0xff; i++) {
454        if (i<=0x03 || (i>=0x08 && i<=0x3f)) {
455            wmask[i] = 0x00;
456        }
457     }
458 
459     memory_region_init_io(&vt82c->superio, OBJECT(d), &superio_ops,
460                           &vt82c->superio_conf, "superio", 2);
461     memory_region_set_enabled(&vt82c->superio, false);
462     /* The floppy also uses 0x3f0 and 0x3f1.
463      * But we do not emulate a floppy, so just set it here. */
464     memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
465                                 &vt82c->superio);
466 
467     qemu_register_reset(vt82c686b_reset, d);
468 }
469 
470 ISABus *vt82c686b_init(PCIBus *bus, int devfn)
471 {
472     PCIDevice *d;
473 
474     d = pci_create_simple_multifunction(bus, devfn, true,
475                                         TYPE_VT82C686B_DEVICE);
476 
477     return ISA_BUS(qdev_get_child_bus(DEVICE(d), "isa.0"));
478 }
479 
480 static void via_class_init(ObjectClass *klass, void *data)
481 {
482     DeviceClass *dc = DEVICE_CLASS(klass);
483     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
484 
485     k->realize = vt82c686b_realize;
486     k->config_write = vt82c686b_write_config;
487     k->vendor_id = PCI_VENDOR_ID_VIA;
488     k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
489     k->class_id = PCI_CLASS_BRIDGE_ISA;
490     k->revision = 0x40;
491     dc->desc = "ISA bridge";
492     dc->vmsd = &vmstate_via;
493     /*
494      * Reason: part of VIA VT82C686 southbridge, needs to be wired up,
495      * e.g. by mips_fulong2e_init()
496      */
497     dc->cannot_instantiate_with_device_add_yet = true;
498 }
499 
500 static const TypeInfo via_info = {
501     .name          = TYPE_VT82C686B_DEVICE,
502     .parent        = TYPE_PCI_DEVICE,
503     .instance_size = sizeof(VT82C686BState),
504     .class_init    = via_class_init,
505 };
506 
507 static void vt82c686b_register_types(void)
508 {
509     type_register_static(&via_ac97_info);
510     type_register_static(&via_mc97_info);
511     type_register_static(&via_pm_info);
512     type_register_static(&via_info);
513 }
514 
515 type_init(vt82c686b_register_types)
516