busdma - Remove filter functionality

- Remove filtfunc and filtarg arguments from bus_dma_tag_create() and
fix all callers. All callers use NULL today for both filterfunc and
filterarg with one

busdma - Remove filter functionality

- Remove filtfunc and filtarg arguments from bus_dma_tag_create() and
fix all callers. All callers use NULL today for both filterfunc and
filterarg with one exception: if_jme.

- Remove filter functionality internally and parent tag tracking.
Without filter functions, we do not need to keep track of tag
ancestry. All inheritance of the parent tag's parameters occurs when
creating the new child tag.

- rename run_filter() to addr_needs_bounce().

- FreeBSD keeps the filtfunc and filtarg arguments but requires them to
be NULL.

- Drop filterfunc usage from if_jme.

In case of "JMC260 chip full mask revision 2", which has a hardware bug
when it comes to DMA transfers crossing the 4 GB bounday, the parent
buffer tag already limits DMA memory to 32bit address space. As such it
should be safe to drop the filterfunc. The filterfunc was checking if
the lower 32bits of the physical address used for DMA are all 0. In case
of a 32bit address space, the only address where all lower 32-bits are
all zero is 0 itself and I am here assuming that the physical address 0
is not used for DMA transfers!

Mainly obtained from: FreeBSD (commits 7cb028de, 900907f4, 1228b93b, 3933ff56)

show more ...

kernel: Move us to using M_NOWAIT and M_WAITOK for mbuf functions.

The main reason is that our having to use the MB_WAIT and MB_DONTWAIT
flags was a recurring issue when porting drivers from FreeBSD

kernel: Move us to using M_NOWAIT and M_WAITOK for mbuf functions.

The main reason is that our having to use the MB_WAIT and MB_DONTWAIT
flags was a recurring issue when porting drivers from FreeBSD because
it tended to get forgotten and the code would compile anyway with the
wrong constants. And since MB_WAIT and MB_DONTWAIT ended up as ocflags
for an objcache_get() or objcache_reclaimlist call (which use M_WAITOK
and M_NOWAIT), it was just one big converting back and forth with some
sanitization in between.

This commit allows M_* again for the mbuf functions and keeps the
sanitizing as it was before: when M_WAITOK is among the passed flags,
objcache functions will be called with M_WAITOK and when it is absent,
they will be called with M_NOWAIT. All other flags are scrubbed by the
MB_OCFLAG() macro which does the same as the former MBTOM().

Approved-by: dillon

show more ...

kernel: Use the new auto-created sysctl ctx/tree in various drivers.

Everywhere where we formerly rolled a hw.fooX.* per-device ctx/tree
ourselves.

This commit switches it to dev.foo.X.*

kernel: make pktinfo and cpuid native to ip_input()

In order to remove ether_input_pkt(), switch the prototype
of if_input() and adjust all callers. While there, consolidate
the style of the invoke

kernel: make pktinfo and cpuid native to ip_input()

In order to remove ether_input_pkt(), switch the prototype
of if_input() and adjust all callers. While there, consolidate
the style of the invoke.

Suggested and reviewed by: sephe

show more ...

ifq: Remove the unused parameter 'mpolled' from ifq dequeue interface

The ifq_poll() -> ifq_dequeue() model is not MPSAFE, and mpolled has
not been used, i.e. set to NULL, for years; time to let it

ifq: Remove the unused parameter 'mpolled' from ifq dequeue interface

The ifq_poll() -> ifq_dequeue() model is not MPSAFE, and mpolled has
not been used, i.e. set to NULL, for years; time to let it go.

show more ...

msk: Disable MSI by default.

For certain chips, enabling it will cause watchdog timeout and the chip
may not be able to work again w/o rebooting.

Reported-by: ferz

msk: Enable MSI

netif: Setup TX ring CPUID before hooking up interrupt vectors

if: Per-cpu ifnet/ifaddr statistics, step 1/3

Wrap ifnet/ifaddr stats updating, setting and extraction into macros;
ease upcoming changes.

if: Multiple TX queue support step 1 of many; introduce ifaltq subqueue

Put the plain queue information, e.g. queue header and tail, serializer,
packet staging scoreboard and ifnet.if_start schedule

if: Multiple TX queue support step 1 of many; introduce ifaltq subqueue

Put the plain queue information, e.g. queue header and tail, serializer,
packet staging scoreboard and ifnet.if_start schedule netmsg etc. into
its own structure (subqueue). ifaltq structure could have multiple of
subqueues based on the count that drivers can specify.

Subqueue's enqueue, dequeue, purging and states updating are protected
by the subqueue's serializer, so for hardwares supporting multiple TX
queues, contention on queuing operation could be greatly reduced.

The subqueue is passed to if_start to let the driver know which hardware
TX queue to work on. Only the related driver's TX queue serializer will
be held, so for hardwares supporting multiple TX queues, contention on
driver's TX queue serializer could be greatly reduced.

Bunch of ifsq_ prefixed functions are added, which is used to perform
various operations on subqueues. Commonly used ifq_ prefixed functions
are still kept mainly for the drivers which do not support multiple TX
queues (well, these functions also ease the netif/ convertion in this
step :).

All of the pseudo network devices under sys/net are converted to use the
new subqueue operation. netproto/802_11 is converted too. igb(4) is
converted to use the new subqueue operation, the rest of the network
drivers are only changed for the if_start interface modification.

For ALTQs which have packet scheduler enabled, only the first subqueue
is used (*).

(*) Whether we should utilize multiple TX queues if ALTQ's packet scheduler
is enabled is quite questionable. Mainly because hardware's multiple TX
queue packet dequeue mechanism could have negative impact on ALTQ's packet
scheduler's decision.

show more ...

if: Move if_cpuid into ifaltq; prepare multiple TX queues support

if_cpuid and if_npoll_cpuid are merged and moved into ifaltq as
altq_cpuid, which indicates the owner CPU of the tx queue. Since
we

if: Move if_cpuid into ifaltq; prepare multiple TX queues support

if_cpuid and if_npoll_cpuid are merged and moved into ifaltq as
altq_cpuid, which indicates the owner CPU of the tx queue. Since
we already have code in if_start_dispatch() to catching tx queue
owner CPU changes, this merging is quite safe.

show more ...

kernel: Remove some unused variables in network drivers.

if: Move IFF_OACTIVE bit into ifaltq; prepare multiple TX queues support

ifaltq.altq_hw_oactive is now used to record that NIC's TX queue is full.
IFF_OACTIVE is removed from kernel. User space IFF

if: Move IFF_OACTIVE bit into ifaltq; prepare multiple TX queues support

ifaltq.altq_hw_oactive is now used to record that NIC's TX queue is full.
IFF_OACTIVE is removed from kernel. User space IFF_OACTIVE is kept for
compability.

ifaltq.altq_hw_oactive should not be accessed directly. Following set of
functions are provided and should be used:
ifq_is_oactive(ifnet.if_snd) - Whether NIC's TX queue is full or not
ifq_set_oactive(ifnet.if_snd) - NIC's TX queue is full
ifq_clr_oactive(ifnet.if_snd) - NIC's TX queue is no longer full

show more ...

kernel: Fix a few more mbuf MB_* vs. kmalloc M_* flag misuses.

kernel: Remove some bogus casts to the own type.

kernel: Remove newlines from the panic messages that have one.

panic() itself will add a newline.

ether: Don't manually packing up input mbufs

Since we use spin ports for netisrs now, we no longer need to explicitly
avoid IPI storm on input path.

intr: Remove no longer correct ithread_cpuid; use rman_get_cpuid instead

Initial import of binutils 2.22 on the new vendor branch

Future versions of binutils will also reside on this branch rather
than continuing to create new binutils branches for each new version.

msk(4): Add support for Yukon Supreme

Obtained-from: FreeBSD 222230

msk(4): Disable ASF on the chips that have it

Obtained-from: FreeBSD 222227

msk(4): Make sure to enable all clocks before accessing registers.

Obtained-from: FreeBSD 222226

msk(4): Only Yukon FE, XL and EC have RAM registers

Obtained-from: FreeBSD 222223

msk(4): Enable store and forward mode except for jumbo frame on Yukon Ultra.

Obtained-from: 222221

msk(4): Do not blindly clear entire GPHY control register.

It seems some bits of the register is used for other purposes such
that clearing these bits resulted in unexpected results such as
corrupte

msk(4): Do not blindly clear entire GPHY control register.

It seems some bits of the register is used for other purposes such
that clearing these bits resulted in unexpected results such as
corrupted RX frames or missing LE status updates.

Obtained-from: FreeBSD 222219

show more ...