sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

enetc: Don't restart on VLAN changes

In rS360398, a new iflib device method was added with default of opt out
for VLAN events needing an interface reset.

This re-init is unintentional for enetc(4).

enetc: Don't restart on VLAN changes

In rS360398, a new iflib device method was added with default of opt out
for VLAN events needing an interface reset.

This re-init is unintentional for enetc(4).

MFC after: 2 weeks
Sponsored by: BBOX.io
Differential Revision: https://reviews.freebsd.org/D41558

show more ...

iflib drivers: Constify PCI ID LUTs

Since d49e83eac3baf16a22b1c5d42e8438b68b17e6f9, iflib(9) is ready
for this change.
While at it, make isc_driver_version strings (static) const where
not apparentl

iflib drivers: Constify PCI ID LUTs

Since d49e83eac3baf16a22b1c5d42e8438b68b17e6f9, iflib(9) is ready
for this change.
While at it, make isc_driver_version strings (static) const where
not apparently un-const on purpose, too.
This reduces the size of the amd64 GENERIC by about 10 KiB.

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

DrvAPI: Trivial mechanical conversions for various drivers

Mechanically convert the following drivers, with trivial changes:
* ipw(4)
* igc(4)
* enetc(4)
* malo(4)
* nfe(4)
* bxe(4)
* awg(4)
* otus(

DrvAPI: Trivial mechanical conversions for various drivers

Mechanically convert the following drivers, with trivial changes:
* ipw(4)
* igc(4)
* enetc(4)
* malo(4)
* nfe(4)
* bxe(4)
* awg(4)
* otus(4)
* rtwn(4)
* bnxt(4)
* ath(4)

Sponsored by: Juniper Networks, Inc.

show more ...

enetc: Fix a typo in a source code comment

- s/alredy/already/

MFC after: 3 days

enetc: Remove unused devclass argument to DRIVER_MODULE.

Remove unused miibus_devclass and miibus_fdt_devclass.

enetc: Wait for pending transmissions before disabling TX queues

According to the RM it's not safe to disable a TX ring while it is busy
transmitting frames.
In order to be safe wait until the ring

enetc: Wait for pending transmissions before disabling TX queues

According to the RM it's not safe to disable a TX ring while it is busy
transmitting frames.
In order to be safe wait until the ring is empty. (cidx==pidx)
Use this opportunity to remove a set-but-unused variable.

Obtained from: Semihalf
Sponsored by: Alstom Group

show more ...

enetc: Simply TX ring credits counting logic

According to the RM rings can hold at most ring_size - 1 descriptors at any time.
No additional logic is needed since iflib already respects this constra

enetc: Simply TX ring credits counting logic

According to the RM rings can hold at most ring_size - 1 descriptors at any time.
No additional logic is needed since iflib already respects this constrain.
Thanks to that the pidx == cidx situation is not ambiguous and indicates an
empty ring.
Use that to simplify the logic that calculates the amount of processed frames.

Obtained from: Semihalf
Sponsored by: Alstom Group

show more ...

enetc: Disable HW IP packet alignment

The NIC can IP align received packets.
It was observed that it caused some rare stalls, that required full board reset.
Disable this feature for now. It doesn't

enetc: Disable HW IP packet alignment

The NIC can IP align received packets.
It was observed that it caused some rare stalls, that required full board reset.
Disable this feature for now. It doesn't provide any significant performance
improvement anyway.

Obtained from: Semihalf
Sponsored by: Alstom Group

show more ...

enetc(4): Fix a typo in a source code comment

- s/decriptors/descriptors/

MFC after: 3 days

enetc: Serialize MDIO transactions

In theory we can have multiple concurrent accesses to the MDIO bus,
e.g. link status check tick and ifconfig request.
In that case we need to make sure that all MD

enetc: Serialize MDIO transactions

In theory we can have multiple concurrent accesses to the MDIO bus,
e.g. link status check tick and ifconfig request.
In that case we need to make sure that all MDIO transaction are
serialized.

Obtained from: Semihalf
Sponsored by: Alstom Group

show more ...

enetc: Fix VID/mcast address hash calculation

The hash is calculated by XOR-ing together bits of the VID.
Prepend a statement with "!!" to make sure that we're get bit 0
on both sides of the equatio

enetc: Fix VID/mcast address hash calculation

The hash is calculated by XOR-ing together bits of the VID.
Prepend a statement with "!!" to make sure that we're get bit 0
on both sides of the equation.

Obtained from: Semihalf
Sponsored by: Alstom Group

show more ...

enetc: Add support for PHY interrupts

- Replace miibus with newly created miibus_fdt.
- Use generic passthrough resource allocation devmethods.

Obtained from: Semihalf
Sponsored by: Alstom Group

enetc: Force correct order with DRIVER_MODULE_ORDERED

The toolchain can reorder symbols, meaning that changing
the order of DRIVER_MODULE macros is not enough
to ensure that miibus gets registered f

enetc: Force correct order with DRIVER_MODULE_ORDERED

The toolchain can reorder symbols, meaning that changing
the order of DRIVER_MODULE macros is not enough
to ensure that miibus gets registered first.
Use DRIVER_MODULE_ORDERED instead to fix the problem properly.

Fixes: 5ad6d28cbe6b ("enetc: Support building the driver as a loadable module.")

Reported by: jhb

show more ...

enetc: Support building the driver as a loadable module.

Function level reset has to be done in attach in order to put the
hardware in a known state before configuring it.
The order of DRIVER_MODULE

enetc: Support building the driver as a loadable module.

Function level reset has to be done in attach in order to put the
hardware in a known state before configuring it.
The order of DRIVER_MODULEs was changed to ensure that the miibus driver
is loaded when mii_attach is called.

Obtained from: Semihalf
Sponsored by: Alstom Group

show more ...

enetc: Add support for 2.5G fixed-link speed

With the v5.13 device-tree update speed of the CPU switch port was
changed to 2.5G. Reflect that in the driver.

Submitted by: Kornel Duleba <mindal@semi

enetc: Add support for 2.5G fixed-link speed

With the v5.13 device-tree update speed of the CPU switch port was
changed to 2.5G. Reflect that in the driver.

Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group

show more ...

Introduce new driver for NXP Ethernet controller

ENETC it a gigabit Ethernet controller found on the LS1028A board.
It supports basic VLAN offloads - tag extraction, injection and hardware
filtering

Introduce new driver for NXP Ethernet controller

ENETC it a gigabit Ethernet controller found on the LS1028A board.
It supports basic VLAN offloads - tag extraction, injection and hardware
filtering. Inband MDIO connectivity is used for link status
monitoring through the miibus interface. Fixed-link mode is also
supported, which allows for operation of internal cpu to switch port.
Since no admin interrupts are present in hardware, link status polling
has to be used.
Due to a hardware bug software reset of the NIC results in a external
abort. Because of that most of the hardware initialization is done
during attach. This also means that in the case of an fatal error full
board reset is required.
The enetc_hw.h header was imporoted from Linux. It is dual licensed.

Submitted by: Kornel Duleba <mindal@semihalf.com>
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30729

show more ...

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

enetc: Don't restart on VLAN changes

In rS360398, a new iflib device method was added with default of opt out
for VLAN events needing an interface reset.

This re-init is unintentional for enetc(4).

enetc: Don't restart on VLAN changes

In rS360398, a new iflib device method was added with default of opt out
for VLAN events needing an interface reset.

This re-init is unintentional for enetc(4).

MFC after: 2 weeks
Sponsored by: BBOX.io
Differential Revision: https://reviews.freebsd.org/D41558

show more ...

iflib drivers: Constify PCI ID LUTs

Since d49e83eac3baf16a22b1c5d42e8438b68b17e6f9, iflib(9) is ready
for this change.
While at it, make isc_driver_version strings (static) const where
not apparentl

iflib drivers: Constify PCI ID LUTs

Since d49e83eac3baf16a22b1c5d42e8438b68b17e6f9, iflib(9) is ready
for this change.
While at it, make isc_driver_version strings (static) const where
not apparently un-const on purpose, too.
This reduces the size of the amd64 GENERIC by about 10 KiB.

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...