drm/bridge: lontium-lt8912b: Validate mode in drm_bridge_funcs::mode_valid()

If the bridge is attached with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set,
this driver won't initialize a connector and

drm/bridge: lontium-lt8912b: Validate mode in drm_bridge_funcs::mode_valid()

If the bridge is attached with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set,
this driver won't initialize a connector and hence display mode won't be
validated in drm_connector_helper_funcs::mode_valid(). So, move the mode
validation from drm_connector_helper_funcs::mode_valid() to
drm_bridge_funcs::mode_valid(), because the mode validation is always done
for the bridge.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813091637.1054586-1-victor.liu@nxp.com

show more ...

drm/bridge: lt8912b: Don't log an error when DSI host can't be found

Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes

drm/bridge: lt8912b: Don't log an error when DSI host can't be found

Given that failing to find a DSI host causes the driver to defer probe,
make use of dev_err_probe() to log the reason. This makes the defer
probe reason available and avoids alerting userspace about something
that is not necessarily an error.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415-anx7625-defer-log-no-dsi-host-v3-3-619a28148e5c@collabora.com

show more ...

drm/bridge: lt8912b: do not return negative values from .get_modes()

The .get_modes() hooks aren't supposed to return negative error
codes. Return 0 for no modes, whatever the reason.

Cc: Adrien Gr

drm/bridge: lt8912b: do not return negative values from .get_modes()

The .get_modes() hooks aren't supposed to return negative error
codes. Return 0 for no modes, whatever the reason.

Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/dcdddcbcb64b6f6cdc55022ee50c10dee8ddbc3d.1709913674.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

drm/bridge: lt8912b: use ->edid_read callback

Prefer using the struct drm_edid based functions.

Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil

drm/bridge: lt8912b: use ->edid_read callback

Prefer using the struct drm_edid based functions.

Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/98f0356f1bd279bc337c904d8313c9afee530b48.1706038510.git.jani.nikula@intel.com

show more ...

drm/bridge: lt8912b: clear the EDID property on failures

If EDID read fails, clear the EDID property.

Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc:

drm/bridge: lt8912b: clear the EDID property on failures

If EDID read fails, clear the EDID property.

Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/2080adaadf4bba3d85f58c42c065caf9aad9a4ef.1706038510.git.jani.nikula@intel.com

show more ...

drm/bridge: lt8912b: use drm_bridge_edid_read()

Prefer using the struct drm_edid based functions.

cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Nei

drm/bridge: lt8912b: use drm_bridge_edid_read()

Prefer using the struct drm_edid based functions.

cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/32c9b52fe6fa7cbad6bfd0ff00041876977e02ea.1706038510.git.jani.nikula@intel.com

show more ...

drm/bridge: lt8912b: Add power supplies

Add supplies to the driver that can be used to turn the Lontium lt8912b
on and off. It can have up to 7 independent supplies, we add them all
and enable/disab

drm/bridge: lt8912b: Add power supplies

Add supplies to the driver that can be used to turn the Lontium lt8912b
on and off. It can have up to 7 independent supplies, we add them all
and enable/disable them with bulk_enable/disable.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115121338.22959-4-francesco@dolcini.it

show more ...

drm/bridge: lt8912b: Add suspend/resume support

Add support for suspend and resume. The lt8912b will power off when
going into suspend and power on when resuming.

Signed-off-by: Stefan Eichenberger

drm/bridge: lt8912b: Add suspend/resume support

Add support for suspend and resume. The lt8912b will power off when
going into suspend and power on when resuming.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115121338.22959-2-francesco@dolcini.it

show more ...

drm/bridge: lt8912b: Add missing drm_bridge_attach call

The driver does not call drm_bridge_attach(), which causes the next
bridge to not be added to the bridge chain. This causes the pipeline
init

drm/bridge: lt8912b: Add missing drm_bridge_attach call

The driver does not call drm_bridge_attach(), which causes the next
bridge to not be added to the bridge chain. This causes the pipeline
init to fail when DRM_BRIDGE_ATTACH_NO_CONNECTOR is used.

Add the call to drm_bridge_attach().

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-4-c542692c6a2f@ideasonboard.com

show more ...

drm/bridge: lt8912b: Manually disable HPD only if it was enabled

lt8912b only calls drm_bridge_hpd_enable() if it creates a connector and
the next bridge has DRM_BRIDGE_OP_HPD set. However, when cal

drm/bridge: lt8912b: Manually disable HPD only if it was enabled

lt8912b only calls drm_bridge_hpd_enable() if it creates a connector and
the next bridge has DRM_BRIDGE_OP_HPD set. However, when calling
drm_bridge_hpd_disable() it misses checking if a connector was created,
calling drm_bridge_hpd_disable() even if HPD was never enabled. I don't
see any issues caused by this wrong call, though.

Add the check to avoid wrongly calling drm_bridge_hpd_disable().

Fixes: 3b0a01a6a522 ("drm/bridge: lt8912b: Add hot plug detection")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-3-c542692c6a2f@ideasonboard.com

show more ...

drm/bridge: lt8912b: Fix crash on bridge detach

The lt8912b driver, in its bridge detach function, calls
drm_connector_unregister() and drm_connector_cleanup().

drm_connector_unregister() should be

drm/bridge: lt8912b: Fix crash on bridge detach

The lt8912b driver, in its bridge detach function, calls
drm_connector_unregister() and drm_connector_cleanup().

drm_connector_unregister() should be called only for connectors
explicitly registered with drm_connector_register(), which is not the
case in lt8912b.

The driver's drm_connector_funcs.destroy hook is set to
drm_connector_cleanup().

Thus the driver should not call either drm_connector_unregister() nor
drm_connector_cleanup() in its lt8912_bridge_detach(), as they cause a
crash on bridge detach:

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000006
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000000858f3000
[0000000000000000] pgd=0800000085918003, p4d=0800000085918003, pud=0800000085431003, pmd=0000000000000000
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Modules linked in: tidss(-) display_connector lontium_lt8912b tc358768 panel_lvds panel_simple drm_dma_helper drm_kms_helper drm drm_panel_orientation_quirks
CPU: 3 PID: 462 Comm: rmmod Tainted: G W 6.5.0-rc2+ #2
Hardware name: Toradex Verdin AM62 on Verdin Development Board (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_connector_cleanup+0x78/0x2d4 [drm]
lr : lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b]
sp : ffff800082ed3a90
x29: ffff800082ed3a90 x28: ffff0000040c1940 x27: 0000000000000000
x26: 0000000000000000 x25: dead000000000122 x24: dead000000000122
x23: dead000000000100 x22: ffff000003fb6388 x21: 0000000000000000
x20: 0000000000000000 x19: ffff000003fb6260 x18: fffffffffffe56e8
x17: 0000000000000000 x16: 0010000000000000 x15: 0000000000000038
x14: 0000000000000000 x13: ffff800081914b48 x12: 000000000000040e
x11: 000000000000015a x10: ffff80008196ebb8 x9 : ffff800081914b48
x8 : 00000000ffffefff x7 : ffff0000040c1940 x6 : ffff80007aa649d0
x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffff80008159e008
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
drm_connector_cleanup+0x78/0x2d4 [drm]
lt8912_bridge_detach+0x54/0x6c [lontium_lt8912b]
drm_bridge_detach+0x44/0x84 [drm]
drm_encoder_cleanup+0x40/0xb8 [drm]
drmm_encoder_alloc_release+0x1c/0x30 [drm]
drm_managed_release+0xac/0x148 [drm]
drm_dev_put.part.0+0x88/0xb8 [drm]
devm_drm_dev_init_release+0x14/0x24 [drm]
devm_action_release+0x14/0x20
release_nodes+0x5c/0x90
devres_release_all+0x8c/0xe0
device_unbind_cleanup+0x18/0x68
device_release_driver_internal+0x208/0x23c
driver_detach+0x4c/0x94
bus_remove_driver+0x70/0xf4
driver_unregister+0x30/0x60
platform_driver_unregister+0x14/0x20
tidss_platform_driver_exit+0x18/0xb2c [tidss]
__arm64_sys_delete_module+0x1a0/0x2b4
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x60/0x10c
do_el0_svc_compat+0x1c/0x40
el0_svc_compat+0x40/0xac
el0t_32_sync_handler+0xb0/0x138
el0t_32_sync+0x194/0x198
Code: 9104a276 f2fbd5b7 aa0203e1 91008af8 (f85c0420)

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-2-c542692c6a2f@ideasonboard.com

show more ...

drm/bridge: lt8912b: Fix bridge_detach

The driver calls lt8912_bridge_detach() from its lt8912_remove()
function. As the DRM core detaches bridges automatically, this leads to
calling lt8912_bridge_

drm/bridge: lt8912b: Fix bridge_detach

The driver calls lt8912_bridge_detach() from its lt8912_remove()
function. As the DRM core detaches bridges automatically, this leads to
calling lt8912_bridge_detach() twice. The code probably has tried to
manage the double-call with the 'is_attached' variable, but the driver
never sets the variable to false, so its of no help.

Fix the issue by dropping the call to lt8912_bridge_detach() from
lt8912_remove(), as the DRM core will handle the detach call for us,
and also drop the useless is_attached field.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804-lt8912b-v1-1-c542692c6a2f@ideasonboard.com

show more ...

drm: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i

drm: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230526090709.1517297-1-u.kleine-koenig@pengutronix.de

show more ...

drm/bridge: lt8912b: Fix DSI Video Mode

LT8912 DSI port supports only Non-Burst mode video operation with Sync
Events and continuous clock on clock lane, correct dsi mode flags
according to that rem

drm/bridge: lt8912b: Fix DSI Video Mode

LT8912 DSI port supports only Non-Burst mode video operation with Sync
Events and continuous clock on clock lane, correct dsi mode flags
according to that removing MIPI_DSI_MODE_VIDEO_BURST flag.

Cc: <stable@vger.kernel.org>
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330093131.424828-1-francesco@dolcini.it

show more ...

drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not found

Returns EPROBE_DEFER when of_drm_find_bridge() fails, this is consistent
with what all the other DRM bridge drivers are doing and this

drm/bridge: lt8912b: return EPROBE_DEFER if bridge is not found

Returns EPROBE_DEFER when of_drm_find_bridge() fails, this is consistent
with what all the other DRM bridge drivers are doing and this is
required since the bridge might not be there when the driver is probed
and this should not be a fatal failure.

Cc: <stable@vger.kernel.org>
Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Matheus Castello <matheus.castello@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230322143821.109744-1-francesco@dolcini.it

show more ...

drm/bridge: lt8912b: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-k

drm/bridge: lt8912b: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221118224540.619276-23-uwe@kleine-koenig.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>

show more ...

drm/bridge: lt8912b: Add hot plug detection

Enable hot plug detection when it is available on the HDMI port.
Without this connecting to a different monitor with incompatible timing
before the 10 sec

drm/bridge: lt8912b: Add hot plug detection

Enable hot plug detection when it is available on the HDMI port.
Without this connecting to a different monitor with incompatible timing
before the 10 seconds poll period will lead to a broken display output.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Adrien Grassein <adrien.grassein@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221128112320.25708-1-francesco@dolcini.it

show more ...

drm/bridge: lt8912b: fix corrupted image output

Correct I2C address for the register list in lt8912_write_lvds_config(),
these registers are on the first I2C address (0x48), the current
function is

drm/bridge: lt8912b: fix corrupted image output

Correct I2C address for the register list in lt8912_write_lvds_config(),
these registers are on the first I2C address (0x48), the current
function is just writing garbage to the wrong registers and this creates
multiple issues (artifacts and output completely corrupted) on some HDMI
displays.

Correct I2C address comes from Lontium documentation and it is the one
used on other out-of-tree LT8912B drivers [1].

[1] https://github.com/boundarydevices/linux/blob/boundary-imx_5.10.x_2.0.0/drivers/video/lt8912.c#L296

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-4-dev@pschenker.ch
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-5-dev@pschenker.ch

show more ...

drm/bridge: lt8912b: set hdmi or dvi mode

The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads
from EDID what the display needs and sets it accordingly.

Fixes: 30e2ae943c26 ("dr

drm/bridge: lt8912b: set hdmi or dvi mode

The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads
from EDID what the display needs and sets it accordingly.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-3-dev@pschenker.ch

show more ...

drm/bridge: lt8912b: add vsync hsync

Currently the bridge driver does not take care whether or not the display
needs positive/negative vertical/horizontal syncs. Pass these two flags
to the bridge f

drm/bridge: lt8912b: add vsync hsync

Currently the bridge driver does not take care whether or not the display
needs positive/negative vertical/horizontal syncs. Pass these two flags
to the bridge from the EDID that was read out from the display.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-2-dev@pschenker.ch

show more ...

drm/bridge: lt8912b: clarify lvds output status

Add comments on the lt8912_write_lvds_config() config to document the
current settings and to make it clear that this is a hardcoded
configuration not

drm/bridge: lt8912b: clarify lvds output status

Add comments on the lt8912_write_lvds_config() config to document the
current settings and to make it clear that this is a hardcoded
configuration not relevant for the HDMI output (could be removed without
affecting the HDMI port).

No changes on the actual register writes.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-5-dev@pschenker.ch

show more ...

drm/bridge: lt8912b: fix corrupted image output

Correct I2C address for the register list in lt8912_write_lvds_config(),
these registers are on the first I2C address (0x48), the current
function is

drm/bridge: lt8912b: fix corrupted image output

Correct I2C address for the register list in lt8912_write_lvds_config(),
these registers are on the first I2C address (0x48), the current
function is just writing garbage to the wrong registers and this creates
multiple issues (artifacts and output completely corrupted) on some HDMI
displays.

Correct I2C address comes from Lontium documentation and it is the one
used on other out-of-tree LT8912B drivers [1].

[1] https://github.com/boundarydevices/linux/blob/boundary-imx_5.10.x_2.0.0/drivers/video/lt8912.c#L296

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-4-dev@pschenker.ch

show more ...

drm/bridge: lt8912b: set hdmi or dvi mode

The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads
from EDID what the display needs and sets it accordingly.

Fixes: 30e2ae943c26 ("dr

drm/bridge: lt8912b: set hdmi or dvi mode

The Lontium LT8912 does have a setting for DVI or HDMI. This patch reads
from EDID what the display needs and sets it accordingly.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-3-dev@pschenker.ch

show more ...

drm/bridge: lt8912b: add vsync hsync

Currently the bridge driver does not take care whether or not the display
needs positive/negative vertical/horizontal syncs. Pass these two flags
to the bridge f

drm/bridge: lt8912b: add vsync hsync

Currently the bridge driver does not take care whether or not the display
needs positive/negative vertical/horizontal syncs. Pass these two flags
to the bridge from the EDID that was read out from the display.

Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Adrien Grassein <adrien.grassein@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-2-dev@pschenker.ch

show more ...

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

i2c: Make remove callback return void

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

show more ...