1# Makefile.in generated by automake 1.12.2 from Makefile.am. 2# doc/Makefile. Generated from Makefile.in by configure. 3 4# Copyright (C) 1994-2012 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15 16 17am__make_dryrun = \ 18 { \ 19 am__dry=no; \ 20 case $$MAKEFLAGS in \ 21 *\\[\ \ ]*) \ 22 echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \ 23 | grep '^AM OK$$' >/dev/null || am__dry=yes;; \ 24 *) \ 25 for am__flg in $$MAKEFLAGS; do \ 26 case $$am__flg in \ 27 *=*|--*) ;; \ 28 *n*) am__dry=yes; break;; \ 29 esac; \ 30 done;; \ 31 esac; \ 32 test $$am__dry = yes; \ 33 } 34pkgdatadir = $(datadir)/EMBOSS 35pkgincludedir = $(includedir)/EMBOSS 36pkglibdir = $(libdir)/EMBOSS 37pkglibexecdir = $(libexecdir)/EMBOSS 38am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 39install_sh_DATA = $(install_sh) -c -m 644 40install_sh_PROGRAM = $(install_sh) -c 41install_sh_SCRIPT = $(install_sh) -c 42INSTALL_HEADER = $(INSTALL_DATA) 43transform = $(program_transform_name) 44NORMAL_INSTALL = : 45PRE_INSTALL = : 46POST_INSTALL = : 47NORMAL_UNINSTALL = : 48PRE_UNINSTALL = : 49POST_UNINSTALL = : 50build_triplet = x86_64-unknown-linux-gnu 51host_triplet = x86_64-unknown-linux-gnu 52subdir = doc 53DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in 54ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 55am__aclocal_m4_deps = $(top_srcdir)/m4/axis2c.m4 \ 56 $(top_srcdir)/m4/general.m4 $(top_srcdir)/m4/hpdf.m4 \ 57 $(top_srcdir)/m4/idxdbs.m4 $(top_srcdir)/m4/java.m4 \ 58 $(top_srcdir)/m4/lf_x11.m4 $(top_srcdir)/m4/libtool.m4 \ 59 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 60 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 61 $(top_srcdir)/m4/mysql.m4 $(top_srcdir)/m4/pkg.m4 \ 62 $(top_srcdir)/m4/pngdriver.m4 $(top_srcdir)/m4/postgresql.m4 \ 63 $(top_srcdir)/m4/sgi.m4 $(top_srcdir)/configure.in 64am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 65 $(ACLOCAL_M4) 66mkinstalldirs = $(install_sh) -d 67CONFIG_HEADER = $(top_builddir)/ajax/core/config.h 68CONFIG_CLEAN_FILES = 69CONFIG_CLEAN_VPATH_FILES = 70SOURCES = 71DIST_SOURCES = 72RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ 73 html-recursive info-recursive install-data-recursive \ 74 install-dvi-recursive install-exec-recursive \ 75 install-html-recursive install-info-recursive \ 76 install-pdf-recursive install-ps-recursive install-recursive \ 77 installcheck-recursive installdirs-recursive pdf-recursive \ 78 ps-recursive uninstall-recursive 79am__can_run_installinfo = \ 80 case $$AM_UPDATE_INFO_DIR in \ 81 n|no|NO) false;; \ 82 *) (install-info --version) >/dev/null 2>&1;; \ 83 esac 84RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 85 distclean-recursive maintainer-clean-recursive 86AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ 87 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ 88 distdir 89ETAGS = etags 90CTAGS = ctags 91DIST_SUBDIRS = $(SUBDIRS) 92DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 93am__relativize = \ 94 dir0=`pwd`; \ 95 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 96 sed_rest='s,^[^/]*/*,,'; \ 97 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 98 sed_butlast='s,/*[^/]*$$,,'; \ 99 while test -n "$$dir1"; do \ 100 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 101 if test "$$first" != "."; then \ 102 if test "$$first" = ".."; then \ 103 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 104 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 105 else \ 106 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 107 if test "$$first2" = "$$first"; then \ 108 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 109 else \ 110 dir2="../$$dir2"; \ 111 fi; \ 112 dir0="$$dir0"/"$$first"; \ 113 fi; \ 114 fi; \ 115 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 116 done; \ 117 reldir="$$dir2" 118ACLOCAL = ${SHELL} /data/scratch/embossdist/missing --run aclocal-1.12 119AJAX_FIXED_ROOT = \"/data/scratch/embossdist/emboss\" 120AJAX_SYSTEM = \"Linux\" 121AMTAR = $${TAR-tar} 122ANT = /usr/bin/ant 123AR = ar 124AUTOCONF = ${SHELL} /data/scratch/embossdist/missing --run autoconf 125AUTOHEADER = ${SHELL} /data/scratch/embossdist/missing --run autoheader 126AUTOMAKE = ${SHELL} /data/scratch/embossdist/missing --run automake-1.12 127AWK = gawk 128AXIS2C_CFLAGS = 129AXIS2C_CPPFLAGS = 130AXIS2C_LDFLAGS = 131AXIS2C_LIBS = 132CC = gcc 133CCDEPMODE = depmode=gcc3 134CFLAGS = -O2 135CPP = gcc -E 136CPPFLAGS = -DAJ_LinuxLF -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 137CXX = g++ 138CXXCPP = g++ -E 139CXXDEPMODE = depmode=gcc3 140CXXFLAGS = -g -O2 141CYGPATH_W = echo 142DEFS = -DHAVE_CONFIG_H 143DEPDIR = .deps 144DEVWARN_CFLAGS = 145DLLTOOL = false 146DSYMUTIL = 147DUMPBIN = 148ECHO_C = 149ECHO_N = -n 150ECHO_T = 151EGREP = /usr/bin/grep -E 152EMBOSS_TOP = /data/scratch/embossdist 153EXEEXT = 154FGREP = /usr/bin/grep -F 155GREP = /usr/bin/grep 156HAVE_MEMMOVE = 157HAVE_STRERROR = 158INSTALL = /usr/bin/install -c 159INSTALL_DATA = ${INSTALL} -m 644 160INSTALL_PROGRAM = ${INSTALL} 161INSTALL_SCRIPT = ${INSTALL} 162INSTALL_STRIP_PROGRAM = $(install_sh) -c -s 163JAR = /usr/bin/jar 164JAVA = /usr/bin/java 165JAVAC = /usr/bin/javac 166JAVA_CFLAGS = 167JAVA_CPPFLAGS = -I/usr/lib/jvm/java/include -I/usr/lib/jvm/java/include/linux -DNO_AUTH 168JAVA_LDFLAGS = 169LD = /usr/bin/ld -m elf_x86_64 170LDFLAGS = 171LIBOBJS = 172LIBS = -lm -lhpdf -lgd -lpng -lz -lm 173LIBTOOL = $(SHELL) $(top_builddir)/libtool 174LIPO = 175LN_S = ln -s 176LTLIBOBJS = 177MAKEINFO = ${SHELL} /data/scratch/embossdist/missing --run makeinfo 178MANIFEST_TOOL = : 179MKDIR_P = /usr/bin/mkdir -p 180MYSQL_CFLAGS = -I/usr/include/mysql -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -fno-strict-aliasing -fwrapv -fPIC -fPIC -g -static-libgcc -fno-omit-frame-pointer -fno-strict-aliasing -DMY_PTHREAD_FASTMUTEX=1 181MYSQL_CONFIG = /usr/bin/mysql_config 182MYSQL_CPPFLAGS = -I/usr/include/mysql 183MYSQL_LDFLAGS = -L/usr/lib64/mysql -lmysqlclient -lpthread -lz -lm -lrt -lssl -lcrypto -ldl 184MYSQL_VERSION = 5.5.32 185NM = /usr/bin/nm -B 186NMEDIT = 187OBJDUMP = objdump 188OBJEXT = o 189OTOOL = 190OTOOL64 = 191PACKAGE = EMBOSS 192PACKAGE_BUGREPORT = emboss-bug@emboss.open-bio.org 193PACKAGE_NAME = EMBOSS 194PACKAGE_STRING = EMBOSS 6.6.0 195PACKAGE_TARNAME = EMBOSS 196PACKAGE_URL = http://emboss.open-bio.org/ 197PACKAGE_VERSION = 6.6.0 198PATH_SEPARATOR = : 199PCRE_DATE = 11-Apr-2009 200PCRE_LIB_VERSION = 0:1:0 201PCRE_MAJOR = 7 202PCRE_MINOR = 9 203PCRE_POSIXLIB_VERSION = 0:0:0 204PCRE_VERSION = 7.9 205PKG_CONFIG = /usr/bin/pkg-config 206PKG_CONFIG_LIBDIR = 207PKG_CONFIG_PATH = 208POSIX_MALLOC_THRESHOLD = -DPOSIX_MALLOC_THRESHOLD=10 209POSTGRESQL_CFLAGS = -I/usr/include 210POSTGRESQL_CONFIG = /usr/bin/pg_config 211POSTGRESQL_CPPFLAGS = -I/usr/include 212POSTGRESQL_LDFLAGS = -L/usr/lib64 -lpq 213POSTGRESQL_VERSION = 9.2.4 214RANLIB = ranlib 215SED = /usr/bin/sed 216SET_MAKE = 217SHELL = /bin/sh 218STRIP = strip 219VERSION = 6.6.0 220WARN_CFLAGS = 221XLIB = -lX11 222XMKMF = 223X_CFLAGS = 224X_EXTRA_LIBS = 225X_LIBS = 226X_PRE_LIBS = -lSM -lICE 227abs_builddir = /data/scratch/embossdist/doc 228abs_srcdir = /data/scratch/embossdist/doc 229abs_top_builddir = /data/scratch/embossdist 230abs_top_srcdir = /data/scratch/embossdist 231ac_ct_AR = ar 232ac_ct_CC = gcc 233ac_ct_CXX = g++ 234ac_ct_DUMPBIN = 235am__include = include 236am__leading_dot = . 237am__quote = 238am__tar = $${TAR-tar} chof - "$$tardir" 239am__untar = $${TAR-tar} xf - 240bindir = ${exec_prefix}/bin 241build = x86_64-unknown-linux-gnu 242build_alias = 243build_cpu = x86_64 244build_os = linux-gnu 245build_vendor = unknown 246builddir = . 247datadir = ${datarootdir} 248datarootdir = ${prefix}/share 249docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} 250dvidir = ${docdir} 251exec_prefix = ${prefix} 252host = x86_64-unknown-linux-gnu 253host_alias = 254host_cpu = x86_64 255host_os = linux-gnu 256host_vendor = unknown 257htmldir = ${docdir} 258includedir = ${prefix}/include 259infodir = ${datarootdir}/info 260install_sh = ${SHELL} /data/scratch/embossdist/install-sh 261libdir = ${exec_prefix}/lib 262libexecdir = ${exec_prefix}/libexec 263localedir = ${datarootdir}/locale 264localstatedir = ${prefix}/var 265mandir = ${datarootdir}/man 266mkdir_p = $(MKDIR_P) 267oldincludedir = /usr/include 268pdfdir = ${docdir} 269prefix = /usr/local 270program_transform_name = s,x,x, 271psdir = ${docdir} 272sbindir = ${exec_prefix}/sbin 273sharedstatedir = ${prefix}/com 274srcdir = . 275sysconfdir = ${prefix}/etc 276target_alias = 277top_build_prefix = ../ 278top_builddir = .. 279top_srcdir = .. 280SUBDIRS = manuals programs tutorials 281all: all-recursive 282 283.SUFFIXES: 284$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 285 @for dep in $?; do \ 286 case '$(am__configure_deps)' in \ 287 *$$dep*) \ 288 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 289 && { if test -f $@; then exit 0; else break; fi; }; \ 290 exit 1;; \ 291 esac; \ 292 done; \ 293 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ 294 $(am__cd) $(top_srcdir) && \ 295 $(AUTOMAKE) --gnu doc/Makefile 296.PRECIOUS: Makefile 297Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 298 @case '$?' in \ 299 *config.status*) \ 300 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 301 *) \ 302 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 303 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 304 esac; 305 306$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 307 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 308 309$(top_srcdir)/configure: $(am__configure_deps) 310 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 311$(ACLOCAL_M4): $(am__aclocal_m4_deps) 312 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 313$(am__aclocal_m4_deps): 314 315mostlyclean-libtool: 316 -rm -f *.lo 317 318clean-libtool: 319 -rm -rf .libs _libs 320 321# This directory's subdirectories are mostly independent; you can cd 322# into them and run 'make' without going through this Makefile. 323# To change the values of 'make' variables: instead of editing Makefiles, 324# (1) if the variable is set in 'config.status', edit 'config.status' 325# (which will cause the Makefiles to be regenerated when you run 'make'); 326# (2) otherwise, pass the desired values on the 'make' command line. 327$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS): 328 @fail= failcom='exit 1'; \ 329 for f in x $$MAKEFLAGS; do \ 330 case $$f in \ 331 *=* | --[!k]*);; \ 332 *k*) failcom='fail=yes';; \ 333 esac; \ 334 done; \ 335 dot_seen=no; \ 336 target=`echo $@ | sed s/-recursive//`; \ 337 case "$@" in \ 338 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 339 *) list='$(SUBDIRS)' ;; \ 340 esac; \ 341 for subdir in $$list; do \ 342 echo "Making $$target in $$subdir"; \ 343 if test "$$subdir" = "."; then \ 344 dot_seen=yes; \ 345 local_target="$$target-am"; \ 346 else \ 347 local_target="$$target"; \ 348 fi; \ 349 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 350 || eval $$failcom; \ 351 done; \ 352 if test "$$dot_seen" = "no"; then \ 353 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 354 fi; test -z "$$fail" 355tags-recursive: 356 list='$(SUBDIRS)'; for subdir in $$list; do \ 357 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ 358 done 359ctags-recursive: 360 list='$(SUBDIRS)'; for subdir in $$list; do \ 361 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ 362 done 363cscopelist-recursive: 364 list='$(SUBDIRS)'; for subdir in $$list; do \ 365 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \ 366 done 367 368ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) 369 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 370 unique=`for i in $$list; do \ 371 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 372 done | \ 373 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 374 END { if (nonempty) { for (i in files) print i; }; }'`; \ 375 mkid -fID $$unique 376tags: TAGS 377 378TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 379 $(TAGS_FILES) $(LISP) 380 set x; \ 381 here=`pwd`; \ 382 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 383 include_option=--etags-include; \ 384 empty_fix=.; \ 385 else \ 386 include_option=--include; \ 387 empty_fix=; \ 388 fi; \ 389 list='$(SUBDIRS)'; for subdir in $$list; do \ 390 if test "$$subdir" = .; then :; else \ 391 test ! -f $$subdir/TAGS || \ 392 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 393 fi; \ 394 done; \ 395 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 396 unique=`for i in $$list; do \ 397 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 398 done | \ 399 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 400 END { if (nonempty) { for (i in files) print i; }; }'`; \ 401 shift; \ 402 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 403 test -n "$$unique" || unique=$$empty_fix; \ 404 if test $$# -gt 0; then \ 405 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 406 "$$@" $$unique; \ 407 else \ 408 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 409 $$unique; \ 410 fi; \ 411 fi 412ctags: CTAGS 413CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ 414 $(TAGS_FILES) $(LISP) 415 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ 416 unique=`for i in $$list; do \ 417 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 418 done | \ 419 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ 420 END { if (nonempty) { for (i in files) print i; }; }'`; \ 421 test -z "$(CTAGS_ARGS)$$unique" \ 422 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 423 $$unique 424 425GTAGS: 426 here=`$(am__cd) $(top_builddir) && pwd` \ 427 && $(am__cd) $(top_srcdir) \ 428 && gtags -i $(GTAGS_ARGS) "$$here" 429 430cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP) 431 list='$(SOURCES) $(HEADERS) $(LISP)'; \ 432 case "$(srcdir)" in \ 433 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 434 *) sdir=$(subdir)/$(srcdir) ;; \ 435 esac; \ 436 for i in $$list; do \ 437 if test -f "$$i"; then \ 438 echo "$(subdir)/$$i"; \ 439 else \ 440 echo "$$sdir/$$i"; \ 441 fi; \ 442 done >> $(top_builddir)/cscope.files 443 444distclean-tags: 445 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 446 447distdir: $(DISTFILES) 448 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 449 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 450 list='$(DISTFILES)'; \ 451 dist_files=`for file in $$list; do echo $$file; done | \ 452 sed -e "s|^$$srcdirstrip/||;t" \ 453 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 454 case $$dist_files in \ 455 */*) $(MKDIR_P) `echo "$$dist_files" | \ 456 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 457 sort -u` ;; \ 458 esac; \ 459 for file in $$dist_files; do \ 460 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 461 if test -d $$d/$$file; then \ 462 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 463 if test -d "$(distdir)/$$file"; then \ 464 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 465 fi; \ 466 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 467 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 468 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 469 fi; \ 470 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 471 else \ 472 test -f "$(distdir)/$$file" \ 473 || cp -p $$d/$$file "$(distdir)/$$file" \ 474 || exit 1; \ 475 fi; \ 476 done 477 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 478 if test "$$subdir" = .; then :; else \ 479 $(am__make_dryrun) \ 480 || test -d "$(distdir)/$$subdir" \ 481 || $(MKDIR_P) "$(distdir)/$$subdir" \ 482 || exit 1; \ 483 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 484 $(am__relativize); \ 485 new_distdir=$$reldir; \ 486 dir1=$$subdir; dir2="$(top_distdir)"; \ 487 $(am__relativize); \ 488 new_top_distdir=$$reldir; \ 489 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 490 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 491 ($(am__cd) $$subdir && \ 492 $(MAKE) $(AM_MAKEFLAGS) \ 493 top_distdir="$$new_top_distdir" \ 494 distdir="$$new_distdir" \ 495 am__remove_distdir=: \ 496 am__skip_length_check=: \ 497 am__skip_mode_fix=: \ 498 distdir) \ 499 || exit 1; \ 500 fi; \ 501 done 502check-am: all-am 503check: check-recursive 504all-am: Makefile 505installdirs: installdirs-recursive 506installdirs-am: 507install: install-recursive 508install-exec: install-exec-recursive 509install-data: install-data-recursive 510uninstall: uninstall-recursive 511 512install-am: all-am 513 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 514 515installcheck: installcheck-recursive 516install-strip: 517 if test -z '$(STRIP)'; then \ 518 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 519 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 520 install; \ 521 else \ 522 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 523 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 524 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 525 fi 526mostlyclean-generic: 527 528clean-generic: 529 530distclean-generic: 531 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 532 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 533 534maintainer-clean-generic: 535 @echo "This command is intended for maintainers to use" 536 @echo "it deletes files that may require special tools to rebuild." 537clean: clean-recursive 538 539clean-am: clean-generic clean-libtool mostlyclean-am 540 541distclean: distclean-recursive 542 -rm -f Makefile 543distclean-am: clean-am distclean-generic distclean-tags 544 545dvi: dvi-recursive 546 547dvi-am: 548 549html: html-recursive 550 551html-am: 552 553info: info-recursive 554 555info-am: 556 557install-data-am: 558 559install-dvi: install-dvi-recursive 560 561install-dvi-am: 562 563install-exec-am: 564 565install-html: install-html-recursive 566 567install-html-am: 568 569install-info: install-info-recursive 570 571install-info-am: 572 573install-man: 574 575install-pdf: install-pdf-recursive 576 577install-pdf-am: 578 579install-ps: install-ps-recursive 580 581install-ps-am: 582 583installcheck-am: 584 585maintainer-clean: maintainer-clean-recursive 586 -rm -f Makefile 587maintainer-clean-am: distclean-am maintainer-clean-generic 588 589mostlyclean: mostlyclean-recursive 590 591mostlyclean-am: mostlyclean-generic mostlyclean-libtool 592 593pdf: pdf-recursive 594 595pdf-am: 596 597ps: ps-recursive 598 599ps-am: 600 601uninstall-am: 602 603.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \ 604 cscopelist-recursive ctags-recursive install-am install-strip \ 605 tags-recursive 606 607.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ 608 all all-am check check-am clean clean-generic clean-libtool \ 609 cscopelist cscopelist-recursive ctags ctags-recursive \ 610 distclean distclean-generic distclean-libtool distclean-tags \ 611 distdir dvi dvi-am html html-am info info-am install \ 612 install-am install-data install-data-am install-dvi \ 613 install-dvi-am install-exec install-exec-am install-html \ 614 install-html-am install-info install-info-am install-man \ 615 install-pdf install-pdf-am install-ps install-ps-am \ 616 install-strip installcheck installcheck-am installdirs \ 617 installdirs-am maintainer-clean maintainer-clean-generic \ 618 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ 619 ps ps-am tags tags-recursive uninstall uninstall-am 620 621 622# Tell versions [3.59,3.63) of GNU make to not export all variables. 623# Otherwise a system limit (for SysV at least) may be exceeded. 624.NOEXPORT: 625